[openwrt/openwrt] realtek: pcs: drop unneeded SerDes number range checks

[LEDE Commits]

robimarko pushed a commit to openwrt/openwrt.git, branch openwrt-25.12:
https://git.openwrt.org/4d86ac6401d3a55d14d3d2dd84d2d0d24ef33801

commit 4d86ac6401d3a55d14d3d2dd84d2d0d24ef33801
Author: Jonas Jelonek <jelonek.jonas at gmail.com>
AuthorDate: Sat Dec 13 10:48:52 2025 +0000

    realtek: pcs: drop unneeded SerDes number range checks
    
    By using references to pre-initiated SerDes instances instead of plain
    SerDes number, there is no need to check for the range anymore in
    various places. During driver/pcs init it is ensured that only valid
    SerDes will reach the configuration functions.
    
    Signed-off-by: Jonas Jelonek <jelonek.jonas at gmail.com>
    Link: https://github.com/openwrt/openwrt/pull/21146
    Signed-off-by: Robert Marko <robimarko at gmail.com>
    (cherry picked from commit 18eea0548356454376ad3c60145446060325ace3)
---
 .../files-6.12/drivers/net/pcs/pcs-rtl-otto.c      | 27 +---------------------
 1 file changed, 1 insertion(+), 26 deletions(-)

diff --git a/target/linux/realtek/files-6.12/drivers/net/pcs/pcs-rtl-otto.c b/target/linux/realtek/files-6.12/drivers/net/pcs/pcs-rtl-otto.c
index 1158097801..7c0f737a67 100644
--- a/target/linux/realtek/files-6.12/drivers/net/pcs/pcs-rtl-otto.c
+++ b/target/linux/realtek/files-6.12/drivers/net/pcs/pcs-rtl-otto.c
@@ -544,8 +544,6 @@ static int rtpcs_838x_setup_serdes(struct rtpcs_serdes *sds,
 {
 	int ret;
 
-	if (sds->id > 5)
-		return -EINVAL;
 	if (!rtpcs_838x_sds_is_mode_supported(sds, mode))
 		return -EINVAL;
 
@@ -585,10 +583,6 @@ static void rtpcs_930x_sds_set(struct rtpcs_serdes *sds, u32 mode)
 	u8 sds_id = sds->id;
 
 	pr_info("%s %d\n", __func__, mode);
-	if (sds_id < 0 || sds_id > 11) {
-		pr_err("Wrong SerDes number: %d\n", sds_id);
-		return;
-	}
 
 	regmap_write_bits(sds->ctrl->map, rtpcs_930x_sds_regs[sds_id],
 			  RTL930X_SDS_MASK << rtpcs_930x_sds_lsb[sds_id],
@@ -602,11 +596,6 @@ static u32 rtpcs_930x_sds_mode_get(struct rtpcs_serdes *sds)
 	u8 sds_id = sds->id;
 	u32 v;
 
-	if (sds_id < 0 || sds_id > 11) {
-		pr_err("Wrong SerDes number: %d\n", sds_id);
-		return 0;
-	}
-
 	regmap_read(sds->ctrl->map, rtpcs_930x_sds_regs[sds_id], &v);
 	v >>= rtpcs_930x_sds_lsb[sds_id];
 
@@ -959,11 +948,6 @@ static void rtpcs_930x_sds_mode_set(struct rtpcs_serdes *sds,
 	u32 mode;
 	u32 submode;
 
-	if (sds->id < 0 || sds->id > 11) {
-		pr_err("%s: invalid SerDes number: %d\n", __func__, sds->id);
-		return;
-	}
-
 	switch (phy_mode) {
 	case PHY_INTERFACE_MODE_SGMII:
 	case PHY_INTERFACE_MODE_1000BASEX:
@@ -2231,9 +2215,6 @@ static int rtpcs_930x_setup_serdes(struct rtpcs_serdes *sds,
 {
 	int calib_tries = 0;
 
-	if (sds->id < 0 || sds->id > 11)
-		return -EINVAL;
-
 	/* Rely on setup from U-boot for some modes, e.g. USXGMII */
 	switch (phy_mode) {
 	case PHY_INTERFACE_MODE_1000BASEX:
@@ -2680,9 +2661,6 @@ static int rtpcs_931x_setup_serdes(struct rtpcs_serdes *sds,
 	u32 sds_id = sds->id;
 	int chiptype = 0;
 
-	if (sds_id < 0 || sds_id > 13)
-		return -EINVAL;
-
 	/*
 	 * TODO: USXGMII is currently the swiss army knife to declare 10G
 	 * multi port PHYs. Real devices use other modes instead. Especially
@@ -2835,7 +2813,7 @@ static int rtpcs_931x_setup_serdes(struct rtpcs_serdes *sds,
 
 	rtpcs_931x_sds_cmu_type_set(sds, mode, chiptype);
 
-	if (sds_id >= 2 && sds_id <= 13) {
+	if (sds_id >= 2) {
 		if (chiptype)
 			rtpcs_sds_write(sds, 0x2E, 0x1, board_sds_tx_type1[sds_id - 2]);
 		else {
@@ -2954,9 +2932,6 @@ static int rtpcs_pcs_config(struct phylink_pcs *pcs, unsigned int neg_mode,
 	struct rtpcs_ctrl *ctrl = link->ctrl;
 	int ret = 0;
 
-	if (link->sds->id < 0)
-		return 0;
-
 	/*
 	 * TODO: This (or copies of this) will be the central function for configuring the
 	 * link between PHY and SerDes. As of now a lot of the code is scattered throughout