[openwrt/openwrt] ramips: fix support for Cudy r700
LEDE Commits
lede-commits at lists.infradead.org
Thu Dec 11 16:24:30 PST 2025
hauke pushed a commit to openwrt/openwrt.git, branch openwrt-24.10:
https://git.openwrt.org/22391baf99634fc9f24d47a5ca475a654f444cd3
commit 22391baf99634fc9f24d47a5ca475a654f444cd3
Author: Marcin Leksmark <lexmark3200 at wp.pl>
AuthorDate: Wed Nov 12 21:39:56 2025 +0100
ramips: fix support for Cudy r700
This PR fixes support for Cudy r700.
Original PR: https://github.com/openwrt/openwrt/pull/18532
Fixed:
- WAN port functionality;
- RESET button;
- Status LED;
- LAN port names consistent with the chassis;
- Merged partitions "debug", "backup" & "firmware" to one partition "firmware" ("debug" & "backup" contained unimportant data);
- Removed redundant DTS elements.
Installation:
To install OpenWRT, you need the intermediate firmware from Cudy. (U-boot is locked). After installing the intermediate firmware, you can install OpenWRT via sysupgrade.
Recovery:
TFTP available.
1. Place the recovery.bin in the serving directory of your TFTP server.
2. Set your IP to 192.168.1.88/24.
3. Press the “Reset” button of Cudy router and hold it. Before the Cudy router is powered on and before TFTP start to download the firmware, don't release the “Reset” button.
4. Power on the Cudy router.
5. You can release the reset button only when TFTP starts downloading firmware.
6. When the SYSTEM LED turns solid green, the upgrade is complete.
Fixes: 75403dd1d05b ("ramips: add support for Cudy R700")
Link: https://github.com/openwrt/openwrt/pull/20756
(cherry picked from commit 35a86267e90312f24fd11553cd5a5db0736b79ca)
Signed-off-by: Marcin Leksmark <lexmark3200 at wp.pl>
Link: https://github.com/openwrt/openwrt/pull/21068
Signed-off-by: Hauke Mehrtens <hauke at hauke-m.de>
---
target/linux/ramips/dts/mt7621_cudy_r700.dts | 81 ++++------------------
target/linux/ramips/image/mt7621.mk | 2 +-
.../ramips/mt7621/base-files/etc/board.d/01_leds | 1 -
.../mt7621/base-files/etc/board.d/02_network | 1 +
4 files changed, 16 insertions(+), 69 deletions(-)
diff --git a/target/linux/ramips/dts/mt7621_cudy_r700.dts b/target/linux/ramips/dts/mt7621_cudy_r700.dts
index 6d1c1ec004..ce23e1a701 100644
--- a/target/linux/ramips/dts/mt7621_cudy_r700.dts
+++ b/target/linux/ramips/dts/mt7621_cudy_r700.dts
@@ -11,10 +11,9 @@
model = "Cudy R700";
aliases {
- led-boot = &led_internet_blue;
- led-failsafe = &led_internet_blue;
- led-running = &led_internet_blue;
- led-upgrade = &led_internet_blue;
+ led-boot = &led_status_green;
+ led-failsafe = &led_status_green;
+ led-running = &led_status_green;
label-mac-device = &gmac0;
};
@@ -27,7 +26,7 @@
reset {
label = "reset";
- gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
@@ -35,41 +34,11 @@
leds {
compatible = "gpio-leds";
- led_internet_blue: internet_blue {
- label = "blue:internet";
- gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
- };
-
- internet_red {
- label = "red:internet";
- gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
- };
-
- wan {
- function = LED_FUNCTION_WAN;
+ led_status_green: led-status-green {
color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_STATUS;
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
};
-
- lan1 {
- label = "green:lan1";
- gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
- };
-
- lan2 {
- label = "green:lan2";
- gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
- };
-
- lan3 {
- label = "green:lan3";
- gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
- };
-
- lan4 {
- label = "green:lan4";
- gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
- };
};
};
@@ -107,38 +76,12 @@
label = "factory";
reg = <0x40000 0x10000>;
read-only;
-
- nvmem-layout {
- compatible = "fixed-layout";
- #address-cells = <1>;
- #size-cells = <1>;
-
- eeprom_factory_0: eeprom at 0 {
- reg = <0x0 0x400>;
- };
-
- eeprom_factory_8000: eeprom at 8000 {
- reg = <0x8000 0x4da8>;
- };
- };
};
partition at 50000 {
compatible = "denx,uimage";
label = "firmware";
- reg = <0x50000 0xf80000>;
- };
-
- partition at fd0000 {
- label = "debug";
- reg = <0xfd0000 0x10000>;
- read-only;
- };
-
- partition at fe0000 {
- label = "backup";
- reg = <0xfe0000 0x10000>;
- read-only;
+ reg = <0x50000 0xfa0000>;
};
partition at ff0000 {
@@ -178,16 +121,20 @@
nvmem-cell-names = "mac-address";
};
+ðphy4 {
+ /delete-property/ interrupts;
+};
+
&switch0 {
ports {
port at 0 {
status = "okay";
- label = "lan1";
+ label = "lan5";
};
port at 1 {
status = "okay";
- label = "lan2";
+ label = "lan4";
};
port at 2 {
@@ -197,7 +144,7 @@
port at 3 {
status = "okay";
- label = "lan4";
+ label = "lan2";
};
};
};
diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk
index 31bdb40b26..4184977b27 100644
--- a/target/linux/ramips/image/mt7621.mk
+++ b/target/linux/ramips/image/mt7621.mk
@@ -801,7 +801,7 @@ define Device/cudy_r700
DEVICE_MODEL := R700
IMAGE_SIZE := 15872k
UIMAGE_NAME := R29
- DEVICE_PACKAGES := -uboot-envtools
+ DEVICE_PACKAGES := -uboot-envtools -wpad-basic-mbedtls
endef
TARGET_DEVICES += cudy_r700
diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
index 4c4e7a2f42..94f36c1f6e 100644
--- a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
@@ -66,7 +66,6 @@ genexis,pulse-ex400|\
netis,n6)
ucidef_set_led_netdev "wan" "wan" "green:wan" "wan" "link tx rx"
;;
-cudy,r700|\
cudy,wr2100)
ucidef_set_led_netdev "lan1" "lan1" "green:lan1" "lan1"
ucidef_set_led_netdev "lan2" "lan2" "green:lan2" "lan2"
diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
index 15c98242ad..557755064a 100644
--- a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
@@ -116,6 +116,7 @@ ramips_setup_interfaces()
uci add_list firewall. at zone[1].network='eth_om'
;;
cudy,c200p|\
+ cudy,r700|\
mikrotik,routerboard-750gr3)
ucidef_set_interfaces_lan_wan "lan2 lan3 lan4 lan5" "wan"
;;
More information about the lede-commits
mailing list