[openwrt/openwrt] realtek: correct whitespace in hp dts files
LEDE Commits
lede-commits at lists.infradead.org
Sun Aug 31 04:21:08 PDT 2025
hauke pushed a commit to openwrt/openwrt.git, branch main:
https://git.openwrt.org/cee13fc0a56dd745da4ae527f9c867eca0fd7750
commit cee13fc0a56dd745da4ae527f9c867eca0fd7750
Author: Felix Baumann <felix.bau at gmx.de>
AuthorDate: Wed Aug 27 19:12:43 2025 +0200
realtek: correct whitespace in hp dts files
Make whitespace consistent, replace 8 spaces by tab
Fixes: 502b2f4ee5a4 ("realtek: switch HP-1920-48G to new shared gpio driver")
Signed-off-by: Felix Baumann <felix.bau at gmx.de>
Link: https://github.com/openwrt/openwrt/pull/19887
Signed-off-by: Hauke Mehrtens <hauke at hauke-m.de>
---
.../linux/realtek/dts/rtl8393_hpe_1920-48g-poe.dts | 144 ++++++++++----------
target/linux/realtek/dts/rtl8393_hpe_1920-48g.dts | 146 ++++++++++-----------
2 files changed, 145 insertions(+), 145 deletions(-)
diff --git a/target/linux/realtek/dts/rtl8393_hpe_1920-48g-poe.dts b/target/linux/realtek/dts/rtl8393_hpe_1920-48g-poe.dts
index e35ba85c35..7257e9e49b 100644
--- a/target/linux/realtek/dts/rtl8393_hpe_1920-48g-poe.dts
+++ b/target/linux/realtek/dts/rtl8393_hpe_1920-48g-poe.dts
@@ -17,81 +17,81 @@
#cooling-cells = <2>;
};
- i2c0: i2c-gpio-0 {
- compatible = "i2c-gpio";
- sda-gpios = <&gpio1 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- scl-gpios = <&gpio1 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- i2c-gpio,delay-us = <2>;
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- sfp0: sfp-p49 {
- compatible = "sff,sfp";
- i2c-bus = <&i2c0>;
- los-gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>;
- mod-def0-gpio = <&gpio1 21 GPIO_ACTIVE_LOW>;
- // tx-fault unconnected (TODO?)
- // tx-disable connected to RTL8214FC (TODO?)
- };
-
- i2c1: i2c-gpio-1 {
- compatible = "i2c-gpio";
- sda-gpios = <&gpio1 23 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- scl-gpios = <&gpio1 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- i2c-gpio,delay-us = <2>;
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- sfp1: sfp-p50 {
- compatible = "sff,sfp";
- i2c-bus = <&i2c1>;
- los-gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>;
- mod-def0-gpio = <&gpio1 25 GPIO_ACTIVE_LOW>;
- // tx-fault unconnected (TODO?)
- // tx-disable connected to RTL8214FC (TODO?)
- };
-
- i2c2: i2c-gpio-2 {
- compatible = "i2c-gpio";
- sda-gpios = <&gpio1 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- scl-gpios = <&gpio1 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- i2c-gpio,delay-us = <2>;
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- sfp2: sfp-p51 {
- compatible = "sff,sfp";
- i2c-bus = <&i2c2>;
- los-gpio = <&gpio1 30 GPIO_ACTIVE_HIGH>;
- mod-def0-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
- // tx-fault unconnected (TODO?)
- // tx-disable connected to RTL8214FC (TODO?)
- };
-
- i2c3: i2c-gpio-3 {
- compatible = "i2c-gpio";
- sda-gpios = <&gpio1 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- scl-gpios = <&gpio1 32 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- i2c-gpio,delay-us = <2>;
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- sfp3: sfp-p52 {
- compatible = "sff,sfp";
- i2c-bus = <&i2c3>;
- los-gpio = <&gpio1 34 GPIO_ACTIVE_HIGH>;
- mod-def0-gpio = <&gpio1 33 GPIO_ACTIVE_LOW>;
- // tx-fault unconnected (TODO?)
- // tx-disable connected to RTL8214FC (TODO?)
- };
+ i2c0: i2c-gpio-0 {
+ compatible = "i2c-gpio";
+ sda-gpios = <&gpio1 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpio1 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ i2c-gpio,delay-us = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ sfp0: sfp-p49 {
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c0>;
+ los-gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpio = <&gpio1 21 GPIO_ACTIVE_LOW>;
+ // tx-fault unconnected (TODO?)
+ // tx-disable connected to RTL8214FC (TODO?)
+ };
+
+ i2c1: i2c-gpio-1 {
+ compatible = "i2c-gpio";
+ sda-gpios = <&gpio1 23 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpio1 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ i2c-gpio,delay-us = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ sfp1: sfp-p50 {
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c1>;
+ los-gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpio = <&gpio1 25 GPIO_ACTIVE_LOW>;
+ // tx-fault unconnected (TODO?)
+ // tx-disable connected to RTL8214FC (TODO?)
+ };
+
+ i2c2: i2c-gpio-2 {
+ compatible = "i2c-gpio";
+ sda-gpios = <&gpio1 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpio1 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ i2c-gpio,delay-us = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ sfp2: sfp-p51 {
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c2>;
+ los-gpio = <&gpio1 30 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
+ // tx-fault unconnected (TODO?)
+ // tx-disable connected to RTL8214FC (TODO?)
+ };
+
+ i2c3: i2c-gpio-3 {
+ compatible = "i2c-gpio";
+ sda-gpios = <&gpio1 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpio1 32 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ i2c-gpio,delay-us = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ sfp3: sfp-p52 {
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c3>;
+ los-gpio = <&gpio1 34 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpio = <&gpio1 33 GPIO_ACTIVE_LOW>;
+ // tx-fault unconnected (TODO?)
+ // tx-disable connected to RTL8214FC (TODO?)
+ };
};
ðernet0 {
- mdio: mdio-bus {
+ mdio: mdio-bus {
EXTERNAL_SFP_PHY_FULL(48, 0)
EXTERNAL_SFP_PHY_FULL(49, 1)
EXTERNAL_SFP_PHY_FULL(50, 2)
diff --git a/target/linux/realtek/dts/rtl8393_hpe_1920-48g.dts b/target/linux/realtek/dts/rtl8393_hpe_1920-48g.dts
index 2f6f75e148..42bd4da2ad 100644
--- a/target/linux/realtek/dts/rtl8393_hpe_1920-48g.dts
+++ b/target/linux/realtek/dts/rtl8393_hpe_1920-48g.dts
@@ -6,82 +6,82 @@
compatible = "hpe,1920-48g", "realtek,rtl8393-soc";
model = "HPE 1920-48G (JG927A)";
- i2c-gpio-shared0 {
- compatible = "i2c-gpio-shared";
- scl-gpios = <&gpio0 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- i2c0: i2c at 0 {
- sda-gpios = <&gpio0 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- i2c-gpio,delay-us = <2>;
- };
-
- i2c2: i2c at 2 {
- sda-gpios = <&gpio0 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- i2c-gpio,delay-us = <2>;
-
- };
- };
-
- i2c-gpio-shared1 {
- compatible = "i2c-gpio-shared";
- scl-gpios = <&gpio0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- i2c1: i2c at 1 {
- sda-gpios = <&gpio0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- i2c-gpio,delay-us = <2>;
- };
-
- i2c3: i2c at 3 {
- sda-gpios = <&gpio0 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- i2c-gpio,delay-us = <2>;
-
- };
- };
-
- sfp0: sfp-p49 {
- compatible = "sff,sfp";
- i2c-bus = <&i2c0>;
- los-gpio = <&gpio0 20 GPIO_ACTIVE_HIGH>;
- mod-def0-gpio = <&gpio0 19 GPIO_ACTIVE_LOW>;
- // tx-fault unconnected (TODO?)
- // tx-disable connected to RTL8214FC (TODO?)
- };
-
- sfp1: sfp-p50 {
- compatible = "sff,sfp";
- i2c-bus = <&i2c1>;
- los-gpio = <&gpio0 13 GPIO_ACTIVE_HIGH>;
- mod-def0-gpio = <&gpio0 12 GPIO_ACTIVE_LOW>;
- // tx-fault unconnected (TODO?)
- // tx-disable connected to RTL8214FC (TODO?)
- };
-
- sfp2: sfp-p51 {
- compatible = "sff,sfp";
- i2c-bus = <&i2c2>;
- los-gpio = <&gpio0 23 GPIO_ACTIVE_HIGH>;
- mod-def0-gpio = <&gpio0 22 GPIO_ACTIVE_LOW>;
- // tx-fault unconnected (TODO?)
- // tx-disable connected to RTL8214FC (TODO?)
- };
-
- sfp3: sfp-p52 {
- compatible = "sff,sfp";
- i2c-bus = <&i2c3>;
- los-gpio = <&gpio0 16 GPIO_ACTIVE_HIGH>;
- mod-def0-gpio = <&gpio0 15 GPIO_ACTIVE_LOW>;
- // tx-fault unconnected (TODO?)
- // tx-disable connected to RTL8214FC (TODO?)
- };
+ i2c-gpio-shared0 {
+ compatible = "i2c-gpio-shared";
+ scl-gpios = <&gpio0 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c0: i2c at 0 {
+ sda-gpios = <&gpio0 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ i2c-gpio,delay-us = <2>;
+ };
+
+ i2c2: i2c at 2 {
+ sda-gpios = <&gpio0 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ i2c-gpio,delay-us = <2>;
+
+ };
+ };
+
+ i2c-gpio-shared1 {
+ compatible = "i2c-gpio-shared";
+ scl-gpios = <&gpio0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c1: i2c at 1 {
+ sda-gpios = <&gpio0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ i2c-gpio,delay-us = <2>;
+ };
+
+ i2c3: i2c at 3 {
+ sda-gpios = <&gpio0 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ i2c-gpio,delay-us = <2>;
+
+ };
+ };
+
+ sfp0: sfp-p49 {
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c0>;
+ los-gpio = <&gpio0 20 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpio = <&gpio0 19 GPIO_ACTIVE_LOW>;
+ // tx-fault unconnected (TODO?)
+ // tx-disable connected to RTL8214FC (TODO?)
+ };
+
+ sfp1: sfp-p50 {
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c1>;
+ los-gpio = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpio = <&gpio0 12 GPIO_ACTIVE_LOW>;
+ // tx-fault unconnected (TODO?)
+ // tx-disable connected to RTL8214FC (TODO?)
+ };
+
+ sfp2: sfp-p51 {
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c2>;
+ los-gpio = <&gpio0 23 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpio = <&gpio0 22 GPIO_ACTIVE_LOW>;
+ // tx-fault unconnected (TODO?)
+ // tx-disable connected to RTL8214FC (TODO?)
+ };
+
+ sfp3: sfp-p52 {
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c3>;
+ los-gpio = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpio = <&gpio0 15 GPIO_ACTIVE_LOW>;
+ // tx-fault unconnected (TODO?)
+ // tx-disable connected to RTL8214FC (TODO?)
+ };
};
ðernet0 {
- mdio: mdio-bus {
+ mdio: mdio-bus {
EXTERNAL_SFP_PHY_FULL(48, 1)
EXTERNAL_SFP_PHY_FULL(49, 3)
EXTERNAL_SFP_PHY_FULL(50, 0)
@@ -91,7 +91,7 @@
&switch0 {
- ports {
+ ports {
SWITCH_PORT(48, 50, qsgmii)
SWITCH_PORT(49, 52, qsgmii)
SWITCH_PORT(50, 49, qsgmii)
More information about the lede-commits
mailing list