[openwrt/openwrt] ath79: araknis_an-300-ap-i-n: use led-sources

[LEDE Commits]

robimarko pushed a commit to openwrt/openwrt.git, branch main:
https://git.openwrt.org/c22db9698e0bb56ae72f72b9287e311135c8a382

commit c22db9698e0bb56ae72f72b9287e311135c8a382
Author: Rosen Penev <rosenp at gmail.com>
AuthorDate: Sat May 24 18:45:03 2025 -0700

    ath79: araknis_an-300-ap-i-n: use led-sources
    
    The ath9k driver creates an ath9k LED by default. Instead of having a
    non functional LED, configure it properly and remove the extra as it's
    not needed.
    
    Signed-off-by: Rosen Penev <rosenp at gmail.com>
    Link: https://github.com/openwrt/openwrt/pull/18904
    Signed-off-by: Robert Marko <robimarko at gmail.com>
---
 .../ath79/dts/ar9344_araknis_an-300-ap-i-n.dts     | 30 ++++++++--------------
 1 file changed, 11 insertions(+), 19 deletions(-)

diff --git a/target/linux/ath79/dts/ar9344_araknis_an-300-ap-i-n.dts b/target/linux/ath79/dts/ar9344_araknis_an-300-ap-i-n.dts
index 86e990ffc7..8ad3efb5c4 100644
--- a/target/linux/ath79/dts/ar9344_araknis_an-300-ap-i-n.dts
+++ b/target/linux/ath79/dts/ar9344_araknis_an-300-ap-i-n.dts
@@ -38,28 +38,12 @@
 			default-state = "off";
 		};
 
-		wifi5g {
-			label = "blue:wifi5g";
-			gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "phy0tpt";
-		};
-
 		wps {
 			function = LED_FUNCTION_WPS;
 			color = <LED_COLOR_ID_BLUE>;
 			gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
 		};
 	};
-
-	ath9k-leds {
-		compatible = "gpio-leds";
-
-		wifi2g {
-			label = "blue:wifi2g";
-			gpios = <&ath9k 0 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "phy1tpt";
-		};
-	};
 };
 
 &mdio0 {
@@ -87,14 +71,17 @@
 &pcie {
 	status = "okay";
 
-	ath9k: wifi at 0,0 {
+	wifi at 0,0 {
 		compatible = "pci168c,0030";
 		reg = <0x0 0 0 0 0>;
 		nvmem-cells = <&macaddr_art_0 1>, <&calibration_art_5000>;
 		nvmem-cell-names = "mac-address", "calibration";
 		ieee80211-freq-limit = <2402000 2482000>;
-		#gpio-cells = <2>;
-		gpio-controller;
+
+		led {
+			led-sources = <0>;
+			led-active-low;
+		};
 	};
 };
 
@@ -105,6 +92,11 @@
 
 	nvmem-cells = <&macaddr_art_0 2>, <&calibration_art_1000>;
 	nvmem-cell-names = "mac-address", "calibration";
+
+	led {
+		led-sources = <12>;
+		led-active-low;
+	};
 };
 
 &art {