[openwrt/openwrt] mediatek: filogic: add Teltonika RUTC50 support
LEDE Commits
lede-commits at lists.infradead.org
Sun Aug 24 09:00:19 PDT 2025
hauke pushed a commit to openwrt/openwrt.git, branch main:
https://git.openwrt.org/69a8c7f71a3fd69a4ef853d340dac3d8bee05490
commit 69a8c7f71a3fd69a4ef853d340dac3d8bee05490
Author: Simonas Tamošaitis <simsasss at gmail.com>
AuthorDate: Tue May 13 05:56:33 2025 +0300
mediatek: filogic: add Teltonika RUTC50 support
Specification:
- MediaTek MT7981A SoC
- 512 MB RAM
- 16MB SPI NOR Flash
- 512MB NAND (split in half for firmware fallback)
- 5x 10/100/1000 Mbps Ethernet, with passive PoE support on LAN1
- WLAN : MediaTek dual-band WiFi 6
- 2.4 GHz : b/g/n/ax, MIMO 2x2
- 5 GHz : a/n/ac/ax, MIMO 2x2
- Quectel RG520N-EB 5G R16 modem
- 2.0 USB Type-A HOST port
- 1x Digital input
- 1x Digital output
- 2x SIM slot (can be swapped via AT commands)
GPIO:
- 1 button (Reset)
- 13 LEDs (power, 4x WAN status, Wifi 2G, Wifi 5G, 3G, 4G, 5G, RSSI 1,2,3)
- 3 Modem control (power button, reset, status)
- 1 USB reset
- 1 Digital input
- 1 Digital output
Flashing via OEM WebUI:
1. Download the firmware image *-squashfs-factory.bin
2. Upload firmware image via OEM WebUI firmware update, do not keep settings
To revert back to OEM firmware:
https://wiki.teltonika-networks.com/view/Bootloader_menu
Use "ModemManager" to establish mobile data connection.
Signed-off-by: Simonas Tamošaitis <simsasss at gmail.com>
Link: https://github.com/openwrt/openwrt/pull/19401
Signed-off-by: Hauke Mehrtens <hauke at hauke-m.de>
---
.../uboot-envtools/files/mediatek_filogic | 4 +
.../mediatek/dts/mt7981a-teltonika-rutc50.dts | 535 +++++++++++++++++++++
.../filogic/base-files/etc/board.d/01_leds | 4 +
.../base-files/etc/board.d/03_gpio_switches | 4 +
.../filogic/base-files/etc/init.d/bootcount | 22 +
.../filogic/base-files/lib/upgrade/platform.sh | 4 +
target/linux/mediatek/image/filogic.mk | 20 +
7 files changed, 593 insertions(+)
diff --git a/package/boot/uboot-tools/uboot-envtools/files/mediatek_filogic b/package/boot/uboot-tools/uboot-envtools/files/mediatek_filogic
index 007fc2ffb6..d07a3d1dcf 100644
--- a/package/boot/uboot-tools/uboot-envtools/files/mediatek_filogic
+++ b/package/boot/uboot-tools/uboot-envtools/files/mediatek_filogic
@@ -127,6 +127,10 @@ tplink,archer-ax80-v1)
ubnt,unifi-6-plus)
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x80000" "0x10000"
;;
+teltonika,rutc50)
+ local envdev=/dev/mtd$(find_mtd_index "u-boot-env")
+ ubootenv_add_uci_config "$envdev" "0x0" "0x10000" "0x10000"
+ ;;
xiaomi,mi-router-ax3000t|\
xiaomi,mi-router-wr30u-stock|\
xiaomi,redmi-router-ax6000-stock)
diff --git a/target/linux/mediatek/dts/mt7981a-teltonika-rutc50.dts b/target/linux/mediatek/dts/mt7981a-teltonika-rutc50.dts
new file mode 100644
index 0000000000..77be140e93
--- /dev/null
+++ b/target/linux/mediatek/dts/mt7981a-teltonika-rutc50.dts
@@ -0,0 +1,535 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+/dts-v1/;
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "mt7981b.dtsi"
+
+/ {
+ model = "Teltonika RUTC50";
+ compatible = "teltonika,rutc50", "mediatek,mt7981";
+
+ aliases {
+ serial0 = &uart0;
+ label-mac-device = &gmac0;
+ led-boot = &power;
+ led-failsafe = &power;
+ led-running = &power;
+ led-upgrade = &power;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory at 40000000 {
+ reg = <0 0x40000000 0 0x10000000>;
+ device_type = "memory";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&pio 6 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ gpio-export {
+ compatible = "gpio-export";
+
+ gpio_pcie_reset {
+ gpio-export,name = "pcie_reset";
+ gpio-export,output = <1>;
+ gpios = <&pio 3 GPIO_ACTIVE_LOW>;
+ };
+
+ gpio_modem_power {
+ gpio-export,name = "modem_power";
+ gpio-export,output = <0>;
+ gpios = <&pio 9 GPIO_ACTIVE_HIGH>;
+ };
+
+ gpio_modem_reset {
+ gpio-export,name = "modem_reset";
+ gpio-export,output = <0>;
+ gpios = <&pio 10 GPIO_ACTIVE_HIGH>;
+ };
+
+ gpio_modem_status {
+ gpio-export,name = "modem_status";
+ gpio-export,input = <0>;
+ gpios = <&pio 11 GPIO_ACTIVE_LOW>;
+ };
+
+ gpio_digital_input {
+ gpio-export,name = "digital_input";
+ gpio-export,input = <0>;
+ gpios = <&pio 12 GPIO_ACTIVE_HIGH>;
+ };
+
+ gpio_digital_output {
+ gpio-export,name = "digital_output";
+ gpio-export,output = <0>;
+ gpios = <&pio 35 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power: power {
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&pio 15 GPIO_ACTIVE_LOW>;
+ };
+
+ wan_eth {
+ function = "wan-eth";
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&pio 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ wan_wifi {
+ function = "wan-wifi";
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&pio 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ wan_sim1 {
+ function = "wan-sim1";
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpio_hc595 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ wan_sim2 {
+ function = "wan-sim2";
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpio_hc595 7 GPIO_ACTIVE_HIGH>;
+ };
+
+ wifi_2g {
+ function = LED_FUNCTION_WLAN_2GHZ;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&pio 14 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ wifi_5g {
+ function = LED_FUNCTION_WLAN_5GHZ;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&pio 5 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+
+ 3G {
+ function = "3G";
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpio_hc595 6 GPIO_ACTIVE_HIGH>;
+ };
+
+ 4G {
+ function = "4G";
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpio_hc595 5 GPIO_ACTIVE_HIGH>;
+ };
+
+ 5G {
+ function = "5G";
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpio_hc595 4 GPIO_ACTIVE_HIGH>;
+ };
+
+ rssi1 {
+ function = "rssi-1";
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpio_hc595 3 GPIO_ACTIVE_HIGH>;
+ };
+
+ rssi2 {
+ function = "rssi-2";
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpio_hc595 2 GPIO_ACTIVE_HIGH>;
+ };
+
+ rssi3 {
+ function = "rssi-3";
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpio_hc595 1 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ watchdog {
+ compatible = "linux,wdt-gpio";
+ gpios = <&pio 2 GPIO_ACTIVE_HIGH>;
+ hw_algo = "toggle";
+ hw_margin_ms = <1000>;
+ };
+};
+
+ð {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gbe_led0_pins>, <&gbe_led1_pins>;
+ status = "okay";
+
+ gmac0: mac at 0 {
+ compatible = "mediatek,eth-mac";
+ reg = <0>;
+ phy-mode = "2500base-x";
+ nvmem-cells = <&macaddr_config_0 0>;
+ nvmem-cell-names = "mac-address";
+
+ fixed-link {
+ speed = <2500>;
+ full-duplex;
+ pause;
+ };
+ };
+
+ gmac1: mac at 1 {
+ compatible = "mediatek,eth-mac";
+ reg = <1>;
+ label = "wan";
+ phy-mode = "gmii";
+ phy-handle = <&int_gbe_phy>;
+ nvmem-cells = <&macaddr_config_0 1>;
+ nvmem-cell-names = "mac-address";
+ };
+};
+
+&int_gbe_phy_led0{
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_AMBER>;
+ status = "okay";
+};
+
+&int_gbe_phy_led1{
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_GREEN>;
+ status = "okay";
+};
+
+&mdio_bus {
+ switch: switch at 1f {
+ compatible = "mediatek,mt7531";
+ reg = <31>;
+ reset-gpios = <&pio 39 GPIO_ACTIVE_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&pio>;
+ interrupts = <38 IRQ_TYPE_LEVEL_HIGH>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
+ reg = <0>;
+ phy-handle = <&swphy0>;
+ label = "lan4";
+ };
+
+ port at 1 {
+ reg = <1>;
+ phy-handle = <&swphy1>;
+ label = "lan3";
+ };
+
+ port at 2 {
+ reg = <2>;
+ phy-handle = <&swphy2>;
+ label = "lan2";
+ };
+
+ port at 3 {
+ reg = <3>;
+ phy-handle = <&swphy3>;
+ label = "lan1";
+ };
+
+ port at 6 {
+ reg = <6>;
+ label = "cpu";
+ ethernet = <&gmac0>;
+ phy-mode = "2500base-x";
+
+ fixed-link {
+ speed = <2500>;
+ full-duplex;
+ pause;
+ };
+ };
+ };
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ swphy0: phy at 0 {
+ reg = <0>;
+
+ mediatek,led-config = <
+ 0x21 0x8009 /* BASIC_CTRL */
+ 0x22 0x0c00 /* ON_DURATION */
+ 0x23 0x1400 /* BLINK_DURATION */
+ 0x24 0xc001 /* LED0_ON_CTRL */
+ 0x25 0x0003 /* LED0_BLINK_CTRL */
+ 0x26 0xc006 /* LED1_ON_CTRL */
+ 0x27 0x003c /* LED1_BLINK_CTRL */
+ >;
+ };
+
+ swphy1: phy at 1 {
+ reg = <1>;
+ };
+
+ swphy2: phy at 2 {
+ reg = <2>;
+ };
+
+ swphy3: phy at 3 {
+ reg = <3>;
+ };
+ };
+ };
+};
+
+&spi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_flash_pins>;
+ status = "okay";
+
+ spi_nand at 0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spi-nand";
+ reg = <0>;
+
+ spi-max-frequency = <52000000>;
+ spi-tx-buswidth = <4>;
+ spi-rx-buswidth = <4>;
+
+ mediatek,nmbm;
+ mediatek,bmt-max-ratio = <1>;
+ mediatek,bmt-max-reserved-blocks = <64>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition at 0 {
+ label = "rutos-a";
+ reg = <0x00000000 0x10000000>;
+ };
+
+ partition at 10000000 {
+ label = "rutos-b";
+ reg = <0x10000000 0x10000000>;
+ };
+ };
+ };
+};
+
+&spi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spic_pins>;
+ status = "okay";
+
+ gpio_hc595: gpio_hc595 at 0 {
+ compatible = "fairchild,74hc595";
+ reg = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ registers-number = <1>;
+ spi-max-frequency = <10000000>;
+ enable-gpios = <&pio 4 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&spi2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi2_flash_pins>;
+ status = "okay";
+
+ flash at 0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+
+ spi-max-frequency = <4000000>;
+ spi-tx-buswidth = <4>;
+ spi-rx-buswidth = <4>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition at 00000 {
+ label = "bl2";
+ reg = <0x00000 0x0040000>;
+ read-only;
+ };
+
+ partition at 40000 {
+ label = "u-boot-env";
+ reg = <0x40000 0x0010000>;
+ };
+
+ factory: partition at 50000 {
+ label = "factory";
+ reg = <0x50000 0x00A0000>;
+ read-only;
+
+ nvmem-layout {
+ compatible = "fixed-layout";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ eeprom_factory_0: eeprom at 0 {
+ reg = <0x0 0x1000>;
+ };
+ };
+ };
+
+ config: partition at f0000 {
+ compatible = "nvmem-cells";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ label = "config";
+ reg = <0xF0000 0x0010000>;
+ read-only;
+
+ nvmem-layout {
+ compatible = "fixed-layout";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_config_0: macaddr at 0 {
+ compatible = "mac-base";
+ reg = <0x0 0x6>;
+ #nvmem-cell-cells = <1>;
+ };
+ };
+ };
+
+ boot: partition at 100000 {
+ label = "fip";
+ reg = <0x100000 0x0100000>;
+ read-only;
+ };
+
+ partition at 200000 {
+ label = "bootconfig-a";
+ reg = <0x200000 0x010000>;
+ };
+
+ partition at 210000 {
+ label = "bootconfig-b";
+ reg = <0x210000 0x010000>;
+ };
+
+ partition at 220000 {
+ label = "event-log";
+ reg = <0x220000 0x090000>;
+ };
+
+ partition at 2B0000 {
+ label = "recovery";
+ reg = <0x2B0000 0xD50000>;
+ };
+ };
+ };
+};
+
+&pio {
+ spi0_flash_pins: spi0-pins {
+ mux {
+ function = "spi";
+ groups = "spi0", "spi0_wp_hold";
+ };
+
+ conf-pu {
+ pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP";
+ drive-strength = <MTK_DRIVE_4mA>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_11>;
+ };
+
+ conf-pd {
+ pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO";
+ drive-strength = <MTK_DRIVE_4mA>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_11>;
+ };
+ };
+
+ spic_pins: spi1-pins {
+ mux {
+ function = "spi";
+ groups = "spi1_1";
+ };
+ };
+
+ spi2_flash_pins: spi2-pins {
+ mux {
+ function = "spi";
+ groups = "spi2", "spi2_wp_hold";
+ };
+
+ conf-pu {
+ pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP";
+ drive-strength = <MTK_DRIVE_8mA>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_11>;
+ };
+
+ conf-pd {
+ pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO";
+ drive-strength = <MTK_DRIVE_8mA>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_11>;
+ };
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&watchdog {
+ status = "okay";
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&xhci {
+ status = "okay";
+};
+
+&wifi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "okay";
+ nvmem-cells = <&eeprom_factory_0>;
+ nvmem-cell-names = "eeprom";
+
+ band at 0 {
+ reg = <0>;
+ nvmem-cells = <&macaddr_config_0 2>;
+ nvmem-cell-names = "mac-address";
+ };
+
+ band at 1 {
+ reg = <1>;
+ nvmem-cells = <&macaddr_config_0 3>;
+ nvmem-cell-names = "mac-address";
+ };
+};
diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds b/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds
index 878b1367a0..b590ddb7e0 100644
--- a/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds
+++ b/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds
@@ -199,6 +199,10 @@ smartrg,sdg-8733a)
ucidef_set_led_netdev "wan-orange" "WAN" "mdio-bus:08:orange:wan" "wan" "link_100 link_1000"
ucidef_set_led_netdev "wan-white" "WAN" "mdio-bus:08:white:wan" "wan" "link_10000"
;;
+teltonika,rutc50)
+ ucidef_set_led_netdev "wan-green" "WAN" "mdio-bus:00:green:wan" "wan" "link_1000 tx rx"
+ ucidef_set_led_netdev "wan-amber" "WAN" "mdio-bus:00:amber:wan" "wan" "link_100 link_10 tx rx"
+ ;;
tplink,fr365-v1)
ucidef_set_led_netdev "port2-green-act" "port-2" "green:port2_act" "port2" "link tx rx"
ucidef_set_led_netdev "port1-green-act" "port-1" "green:sfp" "port1" "link tx rx"
diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/03_gpio_switches b/target/linux/mediatek/filogic/base-files/etc/board.d/03_gpio_switches
index e2fe814439..89889967a2 100644
--- a/target/linux/mediatek/filogic/base-files/etc/board.d/03_gpio_switches
+++ b/target/linux/mediatek/filogic/base-files/etc/board.d/03_gpio_switches
@@ -8,6 +8,10 @@ case "$board" in
huasifei,wh3000-pro)
ucidef_add_gpio_switch "modem_power" "Modem power" "modem_power" "0"
;;
+teltonika,rutc50)
+ ucidef_add_gpio_switch "modem_power" "Modem power button" "modem_power" "1"
+ ucidef_add_gpio_switch "modem_reset" "Modem reset" "modem_reset" "0"
+ ;;
zbtlink,zbt-z8102ax|\
zbtlink,zbt-z8102ax-v2)
ucidef_add_gpio_switch "5g1" "Power 1st modem" "5g1" "1"
diff --git a/target/linux/mediatek/filogic/base-files/etc/init.d/bootcount b/target/linux/mediatek/filogic/base-files/etc/init.d/bootcount
index a0e7d40862..415674322f 100755
--- a/target/linux/mediatek/filogic/base-files/etc/init.d/bootcount
+++ b/target/linux/mediatek/filogic/base-files/etc/init.d/bootcount
@@ -23,6 +23,28 @@ boot() {
EOF
logger "bootcount: rd23 model detected, nvram was updated"
;;
+ teltonika,rutc50)
+ #Bootloader expect successfull startup value after update, we need to write success value to bootconfig partition
+ #otherwise bootloader will fallback to previous root partition
+ . /lib/functions.sh
+ local PART="$(cmdline_get_var ubi.mtd)"
+ local MTD_INDEX=$(find_mtd_index bootconfig-a)
+
+ case "$PART" in
+ rutos-a)
+ [ "$(md5sum /dev/mtd$MTD_INDEX | awk '{print $1}')" = "adc4a78e76efc6b4afdc41925e4017c6" ] || {
+ logger -t "bootcount" "saving new failsafe boot config in /dev/mtd$MTD_INDEX bootconfig-a partition rutos-a"
+ echo -ne "\xe1\xb0\xba\xba\x01\x00\xf9\x01\xf8\x01\xf0\x00\x3d\xd4\xfb\x95" | mtd -e bootconfig-a write - bootconfig-a
+ }
+ ;;
+ rutos-b)
+ [ "$(md5sum /dev/mtd$MTD_INDEX | awk '{print $1}')" = "2904b3476604ef153d1925acdde062e8" ] || {
+ logger -t "bootcount" "saving new failsafe boot config in /dev/mtd$MTD_INDEX bootconfig-a partition rutos-b"
+ echo -ne "\xe1\xb0\xba\xba\x01\x01\xf7\x01\xf8\x00\xf0\x00\xce\xd4\x44\x08" | mtd -e bootconfig-a write - bootconfig-a
+ }
+ ;;
+ esac
+ ;;
zyxel,ex5700-telenor)
fw_setenv uboot_bootcount 0
;;
diff --git a/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh b/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh
index 4f29f2be42..a29ad2a6f6 100755
--- a/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh
+++ b/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh
@@ -174,6 +174,10 @@ platform_do_upgrade() {
CI_ROOTPART="rootfs"
nand_do_upgrade "$1"
;;
+ teltonika,rutc50)
+ CI_UBIPART="$(cmdline_get_var ubi.mtd)"
+ nand_do_upgrade "$1"
+ ;;
nradio,c8-668gl)
CI_DATAPART="rootfs_data"
CI_KERNPART="kernel_2nd"
diff --git a/target/linux/mediatek/image/filogic.mk b/target/linux/mediatek/image/filogic.mk
index 1374f8f1f8..4443948b67 100644
--- a/target/linux/mediatek/image/filogic.mk
+++ b/target/linux/mediatek/image/filogic.mk
@@ -1,4 +1,6 @@
DTS_DIR := $(DTS_DIR)/mediatek
+DEVICE_VARS += SUPPORTED_TELTONIKA_DEVICES
+DEVICE_VARS += SUPPORTED_TELTONIKA_HW_MODS
define Image/Prepare
# For UBI we want only one extra block
@@ -1869,6 +1871,24 @@ define Device/snr_snr-cpe-ax2
endef
TARGET_DEVICES += snr_snr-cpe-ax2
+define Device/teltonika_rutc50
+ DEVICE_VENDOR := Teltonika
+ DEVICE_MODEL := RUTC50
+ SUPPORTED_TELTONIKA_DEVICES := teltonika,rutc
+ DEVICE_DTS := mt7981a-teltonika-rutc50
+ DEVICE_DTS_DIR := ../dts
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ KERNEL_IN_UBI := 1
+ UBINIZE_OPTS := -E 5
+ DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware kmod-usb3 kmod-usb-net-qmi-wwan \
+ kmod-usb-serial-option kmod-gpio-nxp-74hc164
+ IMAGES += factory.bin
+ IMAGE/factory.bin := append-ubi | append-teltonika-metadata
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+endef
+TARGET_DEVICES += teltonika_rutc50
+
define Device/tenbay_wr3000k
DEVICE_VENDOR := Tenbay
DEVICE_MODEL := WR3000K
More information about the lede-commits
mailing list