[openwrt/openwrt] rockchip: fixes and improve for NanoPi R6 series
LEDE Commits
lede-commits at lists.infradead.org
Sun Sep 22 08:38:22 PDT 2024
hauke pushed a commit to openwrt/openwrt.git, branch main:
https://git.openwrt.org/9640bb0c051234849a83dd0725dfc900fbda101d
commit 9640bb0c051234849a83dd0725dfc900fbda101d
Author: Antonio Flores <antflores627 at gmail.com>
AuthorDate: Tue Aug 27 17:16:02 2024 -0400
rockchip: fixes and improve for NanoPi R6 series
Improvement and fixes for the nanopi r6 series, pending on the kernel mailing list
https://lore.kernel.org/all/20240612205056.397204-1-seb-dev@mail.de
Signed-off-by: Antonio Flores <antflores627 at gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16275
Signed-off-by: Hauke Mehrtens <hauke at hauke-m.de>
---
...ockchip-Add-common-definitions-for-NanoPi.patch | 1573 ++++++++++++++++++++
...ockchip-Fix-regulators-gmac-and-naming-on.patch | 470 ++++++
...s-rockchip-Improve-LEDs-on-NanoPi-R6C-R6S.patch | 184 +++
...ockchip-Enable-lower-USB3-port-on-NanoPi-.patch | 62 +
...dts-rockchip-Enable-GPU-on-NanoPi-R6C-R6S.patch | 27 +
5 files changed, 2316 insertions(+)
diff --git a/target/linux/rockchip/patches-6.6/400-1-arm64-dts-rockchip-Add-common-definitions-for-NanoPi.patch b/target/linux/rockchip/patches-6.6/400-1-arm64-dts-rockchip-Add-common-definitions-for-NanoPi.patch
new file mode 100644
index 0000000000..37fb6693dc
--- /dev/null
+++ b/target/linux/rockchip/patches-6.6/400-1-arm64-dts-rockchip-Add-common-definitions-for-NanoPi.patch
@@ -0,0 +1,1573 @@
+From 93be10e4e180eeac9b6a57a4363e08c35bee3af9 Mon Sep 17 00:00:00 2001
+From: Sebastian Kropatsch <seb-dev at mail.de>
+Date: Wed, 12 Jun 2024 22:48:10 +0200
+Subject: [PATCH 1/5] arm64: dts: rockchip: Add common definitions for NanoPi
+ R6C and R6S
+
+The FriendlyElec NanoPi R6C and R6S are quite similar boards,
+although they differ in:
+- M.2 M-Key connector vs second RTL8125BG Ethernet port
+- One of the LEDs has a different function on each board
+- 12-pin GPIO FPC vs 30-pin GPIO header
+- R6S has a PWM-based IR receiver while the R6C has not
+- R6S has a 5V fan connector while the R6C has not
+
+Refactor their DT files by adding a common definitions file to
+improve differentiation clarity between both boards and to make
+hardware-specific DT changes easier in the long run.
+Do not introduce any functional changes.
+
+Signed-off-by: Sebastian Kropatsch <seb-dev at mail.de>
+---
+ .../boot/dts/rockchip/rk3588s-nanopi-r6.dtsi | 763 ++++++++++++++++++
+ .../boot/dts/rockchip/rk3588s-nanopi-r6c.dts | 2 +-
+ .../boot/dts/rockchip/rk3588s-nanopi-r6s.dts | 756 +----------------
+ 3 files changed, 767 insertions(+), 754 deletions(-)
+ create mode 100644 arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi
+
+--- /dev/null
++++ b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi
+@@ -0,0 +1,763 @@
++// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
++/*
++ * Common devicetree definitions for the NanoPi R6C and R6S
++ */
++
++/dts-v1/;
++
++#include <dt-bindings/pinctrl/rockchip.h>
++#include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/input/input.h>
++#include "rk3588s.dtsi"
++
++/ {
++ aliases {
++ ethernet0 = &gmac1;
++ mmc0 = &sdmmc;
++ mmc1 = &sdhci;
++ };
++
++ chosen {
++ stdout-path = "serial2:1500000n8";
++ };
++
++ adc-keys {
++ compatible = "adc-keys";
++ io-channels = <&saradc 0>;
++ io-channel-names = "buttons";
++ keyup-threshold-microvolt = <1800000>;
++ poll-interval = <100>;
++
++ button-maskrom {
++ label = "Maskrom";
++ linux,code = <KEY_VENDOR>;
++ press-threshold-microvolt = <1800>;
++ };
++ };
++
++ gpio-keys {
++ compatible = "gpio-keys";
++ pinctrl-names = "default";
++ pinctrl-0 = <&key1_pin>;
++
++ button-user {
++ label = "User";
++ linux,code = <BTN_1>;
++ gpios = <&gpio1 RK_PC0 GPIO_ACTIVE_LOW>;
++ debounce-interval = <50>;
++ };
++ };
++
++ leds {
++ compatible = "gpio-leds";
++
++ sys_led: led-0 {
++ label = "sys_led";
++ gpios = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>;
++ linux,default-trigger = "heartbeat";
++ pinctrl-names = "default";
++ pinctrl-0 = <&sys_led_pin>;
++ };
++
++ wan_led: led-1 {
++ label = "wan_led";
++ gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&wan_led_pin>;
++ };
++
++ lan1_led: led-2 {
++ label = "lan1_led";
++ gpios = <&gpio1 RK_PC3 GPIO_ACTIVE_HIGH>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&lan1_led_pin>;
++ };
++
++ lan2_led: led-3 {
++ gpios = <&gpio1 RK_PC4 GPIO_ACTIVE_HIGH>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&lan2_led_pin>;
++ };
++ };
++
++ vcc5v0_sys: vcc5v0-sys-regulator {
++ compatible = "regulator-fixed";
++ regulator-name = "vcc5v0_sys";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5000000>;
++ };
++
++ vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator {
++ compatible = "regulator-fixed";
++ regulator-name = "vcc_1v1_nldo_s3";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <1100000>;
++ regulator-max-microvolt = <1100000>;
++ vin-supply = <&vcc5v0_sys>;
++ };
++
++ vcc_3v3_s0: vcc-3v3-s0-regulator {
++ compatible = "regulator-fixed";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-name = "vcc_3v3_s0";
++ vin-supply = <&vcc_3v3_s3>;
++ };
++
++ vcc_3v3_sd_s0: vcc-3v3-sd-s0-regulator {
++ compatible = "regulator-fixed";
++ enable-active-high;
++ gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&sd_s0_pwr>;
++ regulator-name = "vcc_3v3_sd_s0";
++ regulator-boot-on;
++ regulator-max-microvolt = <3000000>;
++ regulator-min-microvolt = <3000000>;
++ vin-supply = <&vcc_3v3_s3>;
++ };
++
++ vcc_3v3_pcie20: vcc3v3-pcie20-regulator {
++ compatible = "regulator-fixed";
++ regulator-name = "vcc_3v3_pcie20";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ vin-supply = <&vcc_3v3_s3>;
++ };
++
++ vcc5v0_usb: vcc5v0-usb-regulator {
++ compatible = "regulator-fixed";
++ regulator-name = "vcc5v0_usb";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5000000>;
++ vin-supply = <&vcc5v0_sys>;
++ };
++
++ vcc5v0_usb_otg0: vcc5v0-usb-otg0-regulator {
++ compatible = "regulator-fixed";
++ enable-active-high;
++ gpios = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&typec5v_pwren>;
++ regulator-name = "vcc5v0_usb_otg0";
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5000000>;
++ vin-supply = <&vcc5v0_usb>;
++ };
++
++ vcc5v0_host_20: vcc5v0-host-20-regulator {
++ compatible = "regulator-fixed";
++ enable-active-high;
++ gpios = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&vcc5v0_host20_en>;
++ regulator-name = "vcc5v0_host_20";
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5000000>;
++ vin-supply = <&vcc5v0_usb>;
++ };
++};
++
++&combphy0_ps {
++ status = "okay";
++};
++
++&combphy2_psu {
++ status = "okay";
++};
++
++&cpu_b0 {
++ cpu-supply = <&vdd_cpu_big0_s0>;
++};
++
++&cpu_b1 {
++ cpu-supply = <&vdd_cpu_big0_s0>;
++};
++
++&cpu_b2 {
++ cpu-supply = <&vdd_cpu_big1_s0>;
++};
++
++&cpu_b3 {
++ cpu-supply = <&vdd_cpu_big1_s0>;
++};
++
++&cpu_l0 {
++ cpu-supply = <&vdd_cpu_lit_s0>;
++};
++
++&cpu_l1 {
++ cpu-supply = <&vdd_cpu_lit_s0>;
++};
++
++&cpu_l2 {
++ cpu-supply = <&vdd_cpu_lit_s0>;
++};
++
++&cpu_l3 {
++ cpu-supply = <&vdd_cpu_lit_s0>;
++};
++
++&gmac1 {
++ clock_in_out = "output";
++ phy-handle = <&rgmii_phy1>;
++ phy-mode = "rgmii-rxid";
++ pinctrl-0 = <&gmac1_miim
++ &gmac1_tx_bus2
++ &gmac1_rx_bus2
++ &gmac1_rgmii_clk
++ &gmac1_rgmii_bus>;
++ pinctrl-names = "default";
++ tx_delay = <0x42>;
++ status = "okay";
++};
++
++&i2c0 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&i2c0m2_xfer>;
++ status = "okay";
++
++ vdd_cpu_big0_s0: regulator at 42 {
++ compatible = "rockchip,rk8602";
++ reg = <0x42>;
++ fcs,suspend-voltage-selector = <1>;
++ regulator-name = "vdd_cpu_big0_s0";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <550000>;
++ regulator-max-microvolt = <1050000>;
++ regulator-ramp-delay = <2300>;
++ vin-supply = <&vcc5v0_sys>;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vdd_cpu_big1_s0: regulator at 43 {
++ compatible = "rockchip,rk8603", "rockchip,rk8602";
++ reg = <0x43>;
++ fcs,suspend-voltage-selector = <1>;
++ regulator-name = "vdd_cpu_big1_s0";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <550000>;
++ regulator-max-microvolt = <1050000>;
++ regulator-ramp-delay = <2300>;
++ vin-supply = <&vcc5v0_sys>;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++};
++
++&i2c2 {
++ status = "okay";
++
++ vdd_npu_s0: regulator at 42 {
++ compatible = "rockchip,rk8602";
++ reg = <0x42>;
++ fcs,suspend-voltage-selector = <1>;
++ regulator-name = "vdd_npu_s0";
++ regulator-min-microvolt = <550000>;
++ regulator-max-microvolt = <950000>;
++ regulator-ramp-delay = <2300>;
++ regulator-boot-on;
++ regulator-always-on;
++ vin-supply = <&vcc5v0_sys>;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++};
++
++&i2c6 {
++ clock-frequency = <200000>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&i2c6m0_xfer>;
++ status = "okay";
++
++ hym8563: rtc at 51 {
++ compatible = "haoyu,hym8563";
++ reg = <0x51>;
++ #clock-cells = <0>;
++ clock-output-names = "hym8563";
++ pinctrl-names = "default";
++ pinctrl-0 = <&rtc_int>;
++ interrupt-parent = <&gpio0>;
++ interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
++ wakeup-source;
++ };
++};
++
++&mdio1 {
++ rgmii_phy1: ethernet-phy at 1 {
++ compatible = "ethernet-phy-id001c.c916";
++ reg = <0x1>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&rtl8211f_rst>;
++ reset-assert-us = <20000>;
++ reset-deassert-us = <100000>;
++ reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
++ };
++};
++
++&pcie2x1l1 {
++ reset-gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_HIGH>;
++ vpcie3v3-supply = <&vcc_3v3_pcie20>;
++ status = "okay";
++};
++
++&pcie2x1l2 {
++ reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
++ vpcie3v3-supply = <&vcc_3v3_pcie20>;
++ status = "okay";
++};
++
++&pinctrl {
++ gpio-key {
++ key1_pin: key1-pin {
++ rockchip,pins = <1 RK_PC0 RK_FUNC_GPIO &pcfg_pull_up>;
++ };
++ };
++
++ gpio-leds {
++ sys_led_pin: sys-led-pin {
++ rockchip,pins =
++ <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++
++ wan_led_pin: wan-led-pin {
++ rockchip,pins =
++ <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++
++ lan1_led_pin: lan1-led-pin {
++ rockchip,pins =
++ <1 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++
++ lan2_led_pin: lan2-led-pin {
++ rockchip,pins =
++ <1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++ };
++
++ hym8563 {
++ rtc_int: rtc-int {
++ rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
++ };
++ };
++
++ sdmmc {
++ sd_s0_pwr: sd-s0-pwr {
++ rockchip,pins = <4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>;
++ };
++ };
++
++ usb {
++ typec5v_pwren: typec5v-pwren {
++ rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++
++ vcc5v0_host20_en: vcc5v0-host20-en {
++ rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++ };
++
++ rtl8211f {
++ rtl8211f_rst: rtl8211f-rst {
++ rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++ };
++};
++
++&saradc {
++ vref-supply = <&avcc_1v8_s0>;
++ status = "okay";
++};
++
++&sdhci {
++ bus-width = <8>;
++ no-sdio;
++ no-sd;
++ non-removable;
++ mmc-hs200-1_8v;
++ status = "okay";
++};
++
++&sdmmc {
++ bus-width = <4>;
++ cap-sd-highspeed;
++ disable-wp;
++ max-frequency = <150000000>;
++ no-mmc;
++ no-sdio;
++ sd-uhs-sdr104;
++ vmmc-supply = <&vcc_3v3_sd_s0>;
++ vqmmc-supply = <&vccio_sd_s0>;
++ status = "okay";
++};
++
++&spi2 {
++ status = "okay";
++ assigned-clocks = <&cru CLK_SPI2>;
++ assigned-clock-rates = <200000000>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
++ num-cs = <1>;
++
++ pmic at 0 {
++ compatible = "rockchip,rk806";
++ spi-max-frequency = <1000000>;
++ reg = <0x0>;
++
++ interrupt-parent = <&gpio0>;
++ interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
++
++ pinctrl-names = "default";
++ pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
++ <&rk806_dvs2_null>, <&rk806_dvs3_null>;
++
++ system-power-controller;
++
++ vcc1-supply = <&vcc5v0_sys>;
++ vcc2-supply = <&vcc5v0_sys>;
++ vcc3-supply = <&vcc5v0_sys>;
++ vcc4-supply = <&vcc5v0_sys>;
++ vcc5-supply = <&vcc5v0_sys>;
++ vcc6-supply = <&vcc5v0_sys>;
++ vcc7-supply = <&vcc5v0_sys>;
++ vcc8-supply = <&vcc5v0_sys>;
++ vcc9-supply = <&vcc5v0_sys>;
++ vcc10-supply = <&vcc5v0_sys>;
++ vcc11-supply = <&vcc_2v0_pldo_s3>;
++ vcc12-supply = <&vcc5v0_sys>;
++ vcc13-supply = <&vcc_1v1_nldo_s3>;
++ vcc14-supply = <&vcc_1v1_nldo_s3>;
++ vcca-supply = <&vcc5v0_sys>;
++
++ gpio-controller;
++ #gpio-cells = <2>;
++
++ rk806_dvs1_null: dvs1-null-pins {
++ pins = "gpio_pwrctrl1";
++ function = "pin_fun0";
++ };
++
++ rk806_dvs2_null: dvs2-null-pins {
++ pins = "gpio_pwrctrl2";
++ function = "pin_fun0";
++ };
++
++ rk806_dvs3_null: dvs3-null-pins {
++ pins = "gpio_pwrctrl3";
++ function = "pin_fun0";
++ };
++
++ regulators {
++ vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
++ regulator-boot-on;
++ regulator-min-microvolt = <550000>;
++ regulator-max-microvolt = <950000>;
++ regulator-ramp-delay = <12500>;
++ regulator-name = "vdd_gpu_s0";
++ regulator-enable-ramp-delay = <400>;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <550000>;
++ regulator-max-microvolt = <950000>;
++ regulator-ramp-delay = <12500>;
++ regulator-name = "vdd_cpu_lit_s0";
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vdd_log_s0: dcdc-reg3 {
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <675000>;
++ regulator-max-microvolt = <750000>;
++ regulator-ramp-delay = <12500>;
++ regulator-name = "vdd_log_s0";
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ regulator-suspend-microvolt = <750000>;
++ };
++ };
++
++ vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <550000>;
++ regulator-max-microvolt = <950000>;
++ regulator-ramp-delay = <12500>;
++ regulator-name = "vdd_vdenc_s0";
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vdd_ddr_s0: dcdc-reg5 {
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <675000>;
++ regulator-max-microvolt = <900000>;
++ regulator-ramp-delay = <12500>;
++ regulator-name = "vdd_ddr_s0";
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ regulator-suspend-microvolt = <850000>;
++ };
++ };
++
++ vdd2_ddr_s3: dcdc-reg6 {
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-name = "vdd2_ddr_s3";
++
++ regulator-state-mem {
++ regulator-on-in-suspend;
++ };
++ };
++
++ vcc_2v0_pldo_s3: dcdc-reg7 {
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <2000000>;
++ regulator-max-microvolt = <2000000>;
++ regulator-ramp-delay = <12500>;
++ regulator-name = "vdd_2v0_pldo_s3";
++
++ regulator-state-mem {
++ regulator-on-in-suspend;
++ regulator-suspend-microvolt = <2000000>;
++ };
++ };
++
++ vcc_3v3_s3: dcdc-reg8 {
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-name = "vcc_3v3_s3";
++
++ regulator-state-mem {
++ regulator-on-in-suspend;
++ regulator-suspend-microvolt = <3300000>;
++ };
++ };
++
++ vddq_ddr_s0: dcdc-reg9 {
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-name = "vddq_ddr_s0";
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vcc_1v8_s3: dcdc-reg10 {
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <1800000>;
++ regulator-name = "vcc_1v8_s3";
++
++ regulator-state-mem {
++ regulator-on-in-suspend;
++ regulator-suspend-microvolt = <1800000>;
++ };
++ };
++
++ avcc_1v8_s0: pldo-reg1 {
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <1800000>;
++ regulator-name = "avcc_1v8_s0";
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ regulator-suspend-microvolt = <1800000>;
++ };
++ };
++
++ vcc_1v8_s0: pldo-reg2 {
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <1800000>;
++ regulator-name = "vcc_1v8_s0";
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ regulator-suspend-microvolt = <1800000>;
++ };
++ };
++
++ avdd_1v2_s0: pldo-reg3 {
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <1200000>;
++ regulator-max-microvolt = <1200000>;
++ regulator-name = "avdd_1v2_s0";
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ avcc_3v3_s0: pldo-reg4 {
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-ramp-delay = <12500>;
++ regulator-name = "avcc_3v3_s0";
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vccio_sd_s0: pldo-reg5 {
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-ramp-delay = <12500>;
++ regulator-name = "vccio_sd_s0";
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ pldo6_s3: pldo-reg6 {
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <1800000>;
++ regulator-name = "pldo6_s3";
++
++ regulator-state-mem {
++ regulator-on-in-suspend;
++ regulator-suspend-microvolt = <1800000>;
++ };
++ };
++
++ vdd_0v75_s3: nldo-reg1 {
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <750000>;
++ regulator-max-microvolt = <750000>;
++ regulator-name = "vdd_0v75_s3";
++
++ regulator-state-mem {
++ regulator-on-in-suspend;
++ regulator-suspend-microvolt = <750000>;
++ };
++ };
++
++ avdd_ddr_pll_s0: nldo-reg2 {
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <850000>;
++ regulator-max-microvolt = <850000>;
++ regulator-name = "avdd_ddr_pll_s0";
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ regulator-suspend-microvolt = <850000>;
++ };
++ };
++
++ avdd_0v75_s0: nldo-reg3 {
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <750000>;
++ regulator-max-microvolt = <750000>;
++ regulator-name = "avdd_0v75_s0";
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ avdd_0v85_s0: nldo-reg4 {
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <850000>;
++ regulator-max-microvolt = <850000>;
++ regulator-name = "avdd_0v85_s0";
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vdd_0v75_s0: nldo-reg5 {
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <750000>;
++ regulator-max-microvolt = <750000>;
++ regulator-name = "vdd_0v75_s0";
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++ };
++ };
++};
++
++&tsadc {
++ status = "okay";
++};
++
++&u2phy2 {
++ status = "okay";
++};
++
++&u2phy2_host {
++ phy-supply = <&vcc5v0_host_20>;
++ status = "okay";
++};
++
++&uart2 {
++ pinctrl-0 = <&uart2m0_xfer>;
++ status = "okay";
++};
++
++&usb_host0_ehci {
++ status = "okay";
++};
++
++&usb_host0_ohci {
++ status = "okay";
++};
+--- a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6c.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6c.dts
+@@ -2,7 +2,7 @@
+
+ /dts-v1/;
+
+-#include "rk3588s-nanopi-r6s.dts"
++#include "rk3588s-nanopi-r6.dtsi"
+
+ / {
+ model = "FriendlyElec NanoPi R6C";
+--- a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6s.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6s.dts
+@@ -2,763 +2,13 @@
+
+ /dts-v1/;
+
+-#include <dt-bindings/pinctrl/rockchip.h>
+-#include <dt-bindings/gpio/gpio.h>
+-#include <dt-bindings/input/input.h>
+-#include "rk3588s.dtsi"
++#include "rk3588s-nanopi-r6.dtsi"
+
+ / {
+ model = "FriendlyElec NanoPi R6S";
+ compatible = "friendlyarm,nanopi-r6s", "rockchip,rk3588s";
+-
+- aliases {
+- ethernet0 = &gmac1;
+- mmc0 = &sdmmc;
+- mmc1 = &sdhci;
+- };
+-
+- chosen {
+- stdout-path = "serial2:1500000n8";
+- };
+-
+- adc-keys {
+- compatible = "adc-keys";
+- io-channels = <&saradc 0>;
+- io-channel-names = "buttons";
+- keyup-threshold-microvolt = <1800000>;
+- poll-interval = <100>;
+-
+- button-maskrom {
+- label = "Maskrom";
+- linux,code = <KEY_VENDOR>;
+- press-threshold-microvolt = <1800>;
+- };
+- };
+-
+- gpio-keys {
+- compatible = "gpio-keys";
+- pinctrl-names = "default";
+- pinctrl-0 = <&key1_pin>;
+-
+- button-user {
+- label = "User";
+- linux,code = <BTN_1>;
+- gpios = <&gpio1 RK_PC0 GPIO_ACTIVE_LOW>;
+- debounce-interval = <50>;
+- };
+- };
+-
+- leds {
+- compatible = "gpio-leds";
+-
+- sys_led: led-0 {
+- label = "sys_led";
+- gpios = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>;
+- linux,default-trigger = "heartbeat";
+- pinctrl-names = "default";
+- pinctrl-0 = <&sys_led_pin>;
+- };
+-
+- wan_led: led-1 {
+- label = "wan_led";
+- gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>;
+- pinctrl-names = "default";
+- pinctrl-0 = <&wan_led_pin>;
+- };
+-
+- lan1_led: led-2 {
+- label = "lan1_led";
+- gpios = <&gpio1 RK_PC3 GPIO_ACTIVE_HIGH>;
+- pinctrl-names = "default";
+- pinctrl-0 = <&lan1_led_pin>;
+- };
+-
+- lan2_led: led-3 {
+- label = "lan2_led";
+- gpios = <&gpio1 RK_PC4 GPIO_ACTIVE_HIGH>;
+- pinctrl-names = "default";
+- pinctrl-0 = <&lan2_led_pin>;
+- };
+- };
+-
+- vcc5v0_sys: vcc5v0-sys-regulator {
+- compatible = "regulator-fixed";
+- regulator-name = "vcc5v0_sys";
+- regulator-always-on;
+- regulator-boot-on;
+- regulator-min-microvolt = <5000000>;
+- regulator-max-microvolt = <5000000>;
+- };
+-
+- vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator {
+- compatible = "regulator-fixed";
+- regulator-name = "vcc_1v1_nldo_s3";
+- regulator-always-on;
+- regulator-boot-on;
+- regulator-min-microvolt = <1100000>;
+- regulator-max-microvolt = <1100000>;
+- vin-supply = <&vcc5v0_sys>;
+- };
+-
+- vcc_3v3_s0: vcc-3v3-s0-regulator {
+- compatible = "regulator-fixed";
+- regulator-always-on;
+- regulator-boot-on;
+- regulator-min-microvolt = <3300000>;
+- regulator-max-microvolt = <3300000>;
+- regulator-name = "vcc_3v3_s0";
+- vin-supply = <&vcc_3v3_s3>;
+- };
+-
+- vcc_3v3_sd_s0: vcc-3v3-sd-s0-regulator {
+- compatible = "regulator-fixed";
+- enable-active-high;
+- gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>;
+- pinctrl-names = "default";
+- pinctrl-0 = <&sd_s0_pwr>;
+- regulator-name = "vcc_3v3_sd_s0";
+- regulator-boot-on;
+- regulator-max-microvolt = <3000000>;
+- regulator-min-microvolt = <3000000>;
+- vin-supply = <&vcc_3v3_s3>;
+- };
+-
+- vcc_3v3_pcie20: vcc3v3-pcie20-regulator {
+- compatible = "regulator-fixed";
+- regulator-name = "vcc_3v3_pcie20";
+- regulator-always-on;
+- regulator-boot-on;
+- regulator-min-microvolt = <3300000>;
+- regulator-max-microvolt = <3300000>;
+- vin-supply = <&vcc_3v3_s3>;
+- };
+-
+- vcc5v0_usb: vcc5v0-usb-regulator {
+- compatible = "regulator-fixed";
+- regulator-name = "vcc5v0_usb";
+- regulator-always-on;
+- regulator-boot-on;
+- regulator-min-microvolt = <5000000>;
+- regulator-max-microvolt = <5000000>;
+- vin-supply = <&vcc5v0_sys>;
+- };
+-
+- vcc5v0_usb_otg0: vcc5v0-usb-otg0-regulator {
+- compatible = "regulator-fixed";
+- enable-active-high;
+- gpios = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
+- pinctrl-names = "default";
+- pinctrl-0 = <&typec5v_pwren>;
+- regulator-name = "vcc5v0_usb_otg0";
+- regulator-min-microvolt = <5000000>;
+- regulator-max-microvolt = <5000000>;
+- vin-supply = <&vcc5v0_usb>;
+- };
+-
+- vcc5v0_host_20: vcc5v0-host-20-regulator {
+- compatible = "regulator-fixed";
+- enable-active-high;
+- gpios = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
+- pinctrl-names = "default";
+- pinctrl-0 = <&vcc5v0_host20_en>;
+- regulator-name = "vcc5v0_host_20";
+- regulator-min-microvolt = <5000000>;
+- regulator-max-microvolt = <5000000>;
+- vin-supply = <&vcc5v0_usb>;
+- };
+-};
+-
+-&combphy0_ps {
+- status = "okay";
+-};
+-
+-&combphy2_psu {
+- status = "okay";
+-};
+-
+-&cpu_b0 {
+- cpu-supply = <&vdd_cpu_big0_s0>;
+-};
+-
+-&cpu_b1 {
+- cpu-supply = <&vdd_cpu_big0_s0>;
+-};
+-
+-&cpu_b2 {
+- cpu-supply = <&vdd_cpu_big1_s0>;
+-};
+-
+-&cpu_b3 {
+- cpu-supply = <&vdd_cpu_big1_s0>;
+-};
+-
+-&cpu_l0 {
+- cpu-supply = <&vdd_cpu_lit_s0>;
+-};
+-
+-&cpu_l1 {
+- cpu-supply = <&vdd_cpu_lit_s0>;
+-};
+-
+-&cpu_l2 {
+- cpu-supply = <&vdd_cpu_lit_s0>;
+-};
+-
+-&cpu_l3 {
+- cpu-supply = <&vdd_cpu_lit_s0>;
+-};
+-
+-&gmac1 {
+- clock_in_out = "output";
+- phy-handle = <&rgmii_phy1>;
+- phy-mode = "rgmii-rxid";
+- pinctrl-0 = <&gmac1_miim
+- &gmac1_tx_bus2
+- &gmac1_rx_bus2
+- &gmac1_rgmii_clk
+- &gmac1_rgmii_bus>;
+- pinctrl-names = "default";
+- tx_delay = <0x42>;
+- status = "okay";
+-};
+-
+-&i2c0 {
+- pinctrl-names = "default";
+- pinctrl-0 = <&i2c0m2_xfer>;
+- status = "okay";
+-
+- vdd_cpu_big0_s0: regulator at 42 {
+- compatible = "rockchip,rk8602";
+- reg = <0x42>;
+- fcs,suspend-voltage-selector = <1>;
+- regulator-name = "vdd_cpu_big0_s0";
+- regulator-always-on;
+- regulator-boot-on;
+- regulator-min-microvolt = <550000>;
+- regulator-max-microvolt = <1050000>;
+- regulator-ramp-delay = <2300>;
+- vin-supply = <&vcc5v0_sys>;
+-
+- regulator-state-mem {
+- regulator-off-in-suspend;
+- };
+- };
+-
+- vdd_cpu_big1_s0: regulator at 43 {
+- compatible = "rockchip,rk8603", "rockchip,rk8602";
+- reg = <0x43>;
+- fcs,suspend-voltage-selector = <1>;
+- regulator-name = "vdd_cpu_big1_s0";
+- regulator-always-on;
+- regulator-boot-on;
+- regulator-min-microvolt = <550000>;
+- regulator-max-microvolt = <1050000>;
+- regulator-ramp-delay = <2300>;
+- vin-supply = <&vcc5v0_sys>;
+-
+- regulator-state-mem {
+- regulator-off-in-suspend;
+- };
+- };
+-};
+-
+-&i2c2 {
+- status = "okay";
+-
+- vdd_npu_s0: regulator at 42 {
+- compatible = "rockchip,rk8602";
+- reg = <0x42>;
+- fcs,suspend-voltage-selector = <1>;
+- regulator-name = "vdd_npu_s0";
+- regulator-min-microvolt = <550000>;
+- regulator-max-microvolt = <950000>;
+- regulator-ramp-delay = <2300>;
+- regulator-boot-on;
+- regulator-always-on;
+- vin-supply = <&vcc5v0_sys>;
+-
+- regulator-state-mem {
+- regulator-off-in-suspend;
+- };
+- };
+-};
+-
+-&i2c6 {
+- clock-frequency = <200000>;
+- pinctrl-names = "default";
+- pinctrl-0 = <&i2c6m0_xfer>;
+- status = "okay";
+-
+- hym8563: rtc at 51 {
+- compatible = "haoyu,hym8563";
+- reg = <0x51>;
+- #clock-cells = <0>;
+- clock-output-names = "hym8563";
+- pinctrl-names = "default";
+- pinctrl-0 = <&rtc_int>;
+- interrupt-parent = <&gpio0>;
+- interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
+- wakeup-source;
+- };
+-};
+-
+-&mdio1 {
+- rgmii_phy1: ethernet-phy at 1 {
+- compatible = "ethernet-phy-id001c.c916";
+- reg = <0x1>;
+- pinctrl-names = "default";
+- pinctrl-0 = <&rtl8211f_rst>;
+- reset-assert-us = <20000>;
+- reset-deassert-us = <100000>;
+- reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+- };
+-};
+-
+-&pcie2x1l1 {
+- reset-gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_HIGH>;
+- vpcie3v3-supply = <&vcc_3v3_pcie20>;
+- status = "okay";
+-};
+-
+-&pcie2x1l2 {
+- reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
+- vpcie3v3-supply = <&vcc_3v3_pcie20>;
+- status = "okay";
+-};
+-
+-&pinctrl {
+- gpio-key {
+- key1_pin: key1-pin {
+- rockchip,pins = <1 RK_PC0 RK_FUNC_GPIO &pcfg_pull_up>;
+- };
+- };
+-
+- gpio-leds {
+- sys_led_pin: sys-led-pin {
+- rockchip,pins =
+- <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+- };
+-
+- wan_led_pin: wan-led-pin {
+- rockchip,pins =
+- <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+- };
+-
+- lan1_led_pin: lan1-led-pin {
+- rockchip,pins =
+- <1 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
+- };
+-
+- lan2_led_pin: lan2-led-pin {
+- rockchip,pins =
+- <1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
+- };
+- };
+-
+- hym8563 {
+- rtc_int: rtc-int {
+- rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
+- };
+- };
+-
+- sdmmc {
+- sd_s0_pwr: sd-s0-pwr {
+- rockchip,pins = <4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>;
+- };
+- };
+-
+- usb {
+- typec5v_pwren: typec5v-pwren {
+- rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+- };
+-
+- vcc5v0_host20_en: vcc5v0-host20-en {
+- rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+- };
+- };
+-
+- rtl8211f {
+- rtl8211f_rst: rtl8211f-rst {
+- rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+- };
+- };
+-};
+-
+-&saradc {
+- vref-supply = <&avcc_1v8_s0>;
+- status = "okay";
+-};
+-
+-&sdhci {
+- bus-width = <8>;
+- no-sdio;
+- no-sd;
+- non-removable;
+- mmc-hs200-1_8v;
+- status = "okay";
+-};
+-
+-&sdmmc {
+- bus-width = <4>;
+- cap-sd-highspeed;
+- disable-wp;
+- max-frequency = <150000000>;
+- no-mmc;
+- no-sdio;
+- sd-uhs-sdr104;
+- vmmc-supply = <&vcc_3v3_sd_s0>;
+- vqmmc-supply = <&vccio_sd_s0>;
+- status = "okay";
+-};
+-
+-&spi2 {
+- status = "okay";
+- assigned-clocks = <&cru CLK_SPI2>;
+- assigned-clock-rates = <200000000>;
+- pinctrl-names = "default";
+- pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
+- num-cs = <1>;
+-
+- pmic at 0 {
+- compatible = "rockchip,rk806";
+- spi-max-frequency = <1000000>;
+- reg = <0x0>;
+-
+- interrupt-parent = <&gpio0>;
+- interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+-
+- pinctrl-names = "default";
+- pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
+- <&rk806_dvs2_null>, <&rk806_dvs3_null>;
+-
+- system-power-controller;
+-
+- vcc1-supply = <&vcc5v0_sys>;
+- vcc2-supply = <&vcc5v0_sys>;
+- vcc3-supply = <&vcc5v0_sys>;
+- vcc4-supply = <&vcc5v0_sys>;
+- vcc5-supply = <&vcc5v0_sys>;
+- vcc6-supply = <&vcc5v0_sys>;
+- vcc7-supply = <&vcc5v0_sys>;
+- vcc8-supply = <&vcc5v0_sys>;
+- vcc9-supply = <&vcc5v0_sys>;
+- vcc10-supply = <&vcc5v0_sys>;
+- vcc11-supply = <&vcc_2v0_pldo_s3>;
+- vcc12-supply = <&vcc5v0_sys>;
+- vcc13-supply = <&vcc_1v1_nldo_s3>;
+- vcc14-supply = <&vcc_1v1_nldo_s3>;
+- vcca-supply = <&vcc5v0_sys>;
+-
+- gpio-controller;
+- #gpio-cells = <2>;
+-
+- rk806_dvs1_null: dvs1-null-pins {
+- pins = "gpio_pwrctrl1";
+- function = "pin_fun0";
+- };
+-
+- rk806_dvs2_null: dvs2-null-pins {
+- pins = "gpio_pwrctrl2";
+- function = "pin_fun0";
+- };
+-
+- rk806_dvs3_null: dvs3-null-pins {
+- pins = "gpio_pwrctrl3";
+- function = "pin_fun0";
+- };
+-
+- regulators {
+- vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
+- regulator-boot-on;
+- regulator-min-microvolt = <550000>;
+- regulator-max-microvolt = <950000>;
+- regulator-ramp-delay = <12500>;
+- regulator-name = "vdd_gpu_s0";
+- regulator-enable-ramp-delay = <400>;
+-
+- regulator-state-mem {
+- regulator-off-in-suspend;
+- };
+- };
+-
+- vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
+- regulator-always-on;
+- regulator-boot-on;
+- regulator-min-microvolt = <550000>;
+- regulator-max-microvolt = <950000>;
+- regulator-ramp-delay = <12500>;
+- regulator-name = "vdd_cpu_lit_s0";
+-
+- regulator-state-mem {
+- regulator-off-in-suspend;
+- };
+- };
+-
+- vdd_log_s0: dcdc-reg3 {
+- regulator-always-on;
+- regulator-boot-on;
+- regulator-min-microvolt = <675000>;
+- regulator-max-microvolt = <750000>;
+- regulator-ramp-delay = <12500>;
+- regulator-name = "vdd_log_s0";
+-
+- regulator-state-mem {
+- regulator-off-in-suspend;
+- regulator-suspend-microvolt = <750000>;
+- };
+- };
+-
+- vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
+- regulator-always-on;
+- regulator-boot-on;
+- regulator-min-microvolt = <550000>;
+- regulator-max-microvolt = <950000>;
+- regulator-ramp-delay = <12500>;
+- regulator-name = "vdd_vdenc_s0";
+-
+- regulator-state-mem {
+- regulator-off-in-suspend;
+- };
+- };
+-
+- vdd_ddr_s0: dcdc-reg5 {
+- regulator-always-on;
+- regulator-boot-on;
+- regulator-min-microvolt = <675000>;
+- regulator-max-microvolt = <900000>;
+- regulator-ramp-delay = <12500>;
+- regulator-name = "vdd_ddr_s0";
+-
+- regulator-state-mem {
+- regulator-off-in-suspend;
+- regulator-suspend-microvolt = <850000>;
+- };
+- };
+-
+- vdd2_ddr_s3: dcdc-reg6 {
+- regulator-always-on;
+- regulator-boot-on;
+- regulator-name = "vdd2_ddr_s3";
+-
+- regulator-state-mem {
+- regulator-on-in-suspend;
+- };
+- };
+-
+- vcc_2v0_pldo_s3: dcdc-reg7 {
+- regulator-always-on;
+- regulator-boot-on;
+- regulator-min-microvolt = <2000000>;
+- regulator-max-microvolt = <2000000>;
+- regulator-ramp-delay = <12500>;
+- regulator-name = "vdd_2v0_pldo_s3";
+-
+- regulator-state-mem {
+- regulator-on-in-suspend;
+- regulator-suspend-microvolt = <2000000>;
+- };
+- };
+-
+- vcc_3v3_s3: dcdc-reg8 {
+- regulator-always-on;
+- regulator-boot-on;
+- regulator-min-microvolt = <3300000>;
+- regulator-max-microvolt = <3300000>;
+- regulator-name = "vcc_3v3_s3";
+-
+- regulator-state-mem {
+- regulator-on-in-suspend;
+- regulator-suspend-microvolt = <3300000>;
+- };
+- };
+-
+- vddq_ddr_s0: dcdc-reg9 {
+- regulator-always-on;
+- regulator-boot-on;
+- regulator-name = "vddq_ddr_s0";
+-
+- regulator-state-mem {
+- regulator-off-in-suspend;
+- };
+- };
+-
+- vcc_1v8_s3: dcdc-reg10 {
+- regulator-always-on;
+- regulator-boot-on;
+- regulator-min-microvolt = <1800000>;
+- regulator-max-microvolt = <1800000>;
+- regulator-name = "vcc_1v8_s3";
+-
+- regulator-state-mem {
+- regulator-on-in-suspend;
+- regulator-suspend-microvolt = <1800000>;
+- };
+- };
+-
+- avcc_1v8_s0: pldo-reg1 {
+- regulator-always-on;
+- regulator-boot-on;
+- regulator-min-microvolt = <1800000>;
+- regulator-max-microvolt = <1800000>;
+- regulator-name = "avcc_1v8_s0";
+-
+- regulator-state-mem {
+- regulator-off-in-suspend;
+- regulator-suspend-microvolt = <1800000>;
+- };
+- };
+-
+- vcc_1v8_s0: pldo-reg2 {
+- regulator-always-on;
+- regulator-boot-on;
+- regulator-min-microvolt = <1800000>;
+- regulator-max-microvolt = <1800000>;
+- regulator-name = "vcc_1v8_s0";
+-
+- regulator-state-mem {
+- regulator-off-in-suspend;
+- regulator-suspend-microvolt = <1800000>;
+- };
+- };
+-
+- avdd_1v2_s0: pldo-reg3 {
+- regulator-always-on;
+- regulator-boot-on;
+- regulator-min-microvolt = <1200000>;
+- regulator-max-microvolt = <1200000>;
+- regulator-name = "avdd_1v2_s0";
+-
+- regulator-state-mem {
+- regulator-off-in-suspend;
+- };
+- };
+-
+- avcc_3v3_s0: pldo-reg4 {
+- regulator-always-on;
+- regulator-boot-on;
+- regulator-min-microvolt = <3300000>;
+- regulator-max-microvolt = <3300000>;
+- regulator-ramp-delay = <12500>;
+- regulator-name = "avcc_3v3_s0";
+-
+- regulator-state-mem {
+- regulator-off-in-suspend;
+- };
+- };
+-
+- vccio_sd_s0: pldo-reg5 {
+- regulator-always-on;
+- regulator-boot-on;
+- regulator-min-microvolt = <1800000>;
+- regulator-max-microvolt = <3300000>;
+- regulator-ramp-delay = <12500>;
+- regulator-name = "vccio_sd_s0";
+-
+- regulator-state-mem {
+- regulator-off-in-suspend;
+- };
+- };
+-
+- pldo6_s3: pldo-reg6 {
+- regulator-always-on;
+- regulator-boot-on;
+- regulator-min-microvolt = <1800000>;
+- regulator-max-microvolt = <1800000>;
+- regulator-name = "pldo6_s3";
+-
+- regulator-state-mem {
+- regulator-on-in-suspend;
+- regulator-suspend-microvolt = <1800000>;
+- };
+- };
+-
+- vdd_0v75_s3: nldo-reg1 {
+- regulator-always-on;
+- regulator-boot-on;
+- regulator-min-microvolt = <750000>;
+- regulator-max-microvolt = <750000>;
+- regulator-name = "vdd_0v75_s3";
+-
+- regulator-state-mem {
+- regulator-on-in-suspend;
+- regulator-suspend-microvolt = <750000>;
+- };
+- };
+-
+- avdd_ddr_pll_s0: nldo-reg2 {
+- regulator-always-on;
+- regulator-boot-on;
+- regulator-min-microvolt = <850000>;
+- regulator-max-microvolt = <850000>;
+- regulator-name = "avdd_ddr_pll_s0";
+-
+- regulator-state-mem {
+- regulator-off-in-suspend;
+- regulator-suspend-microvolt = <850000>;
+- };
+- };
+-
+- avdd_0v75_s0: nldo-reg3 {
+- regulator-always-on;
+- regulator-boot-on;
+- regulator-min-microvolt = <750000>;
+- regulator-max-microvolt = <750000>;
+- regulator-name = "avdd_0v75_s0";
+-
+- regulator-state-mem {
+- regulator-off-in-suspend;
+- };
+- };
+-
+- avdd_0v85_s0: nldo-reg4 {
+- regulator-always-on;
+- regulator-boot-on;
+- regulator-min-microvolt = <850000>;
+- regulator-max-microvolt = <850000>;
+- regulator-name = "avdd_0v85_s0";
+-
+- regulator-state-mem {
+- regulator-off-in-suspend;
+- };
+- };
+-
+- vdd_0v75_s0: nldo-reg5 {
+- regulator-always-on;
+- regulator-boot-on;
+- regulator-min-microvolt = <750000>;
+- regulator-max-microvolt = <750000>;
+- regulator-name = "vdd_0v75_s0";
+-
+- regulator-state-mem {
+- regulator-off-in-suspend;
+- };
+- };
+- };
+- };
+-};
+-
+-&tsadc {
+- status = "okay";
+-};
+-
+-&u2phy2 {
+- status = "okay";
+-};
+-
+-&u2phy2_host {
+- phy-supply = <&vcc5v0_host_20>;
+- status = "okay";
+-};
+-
+-&uart2 {
+- pinctrl-0 = <&uart2m0_xfer>;
+- status = "okay";
+-};
+-
+-&usb_host0_ehci {
+- status = "okay";
+ };
+
+-&usb_host0_ohci {
+- status = "okay";
++&lan2_led {
++ label = "lan2_led";
+ };
diff --git a/target/linux/rockchip/patches-6.6/400-2-arm64-dts-rockchip-Fix-regulators-gmac-and-naming-on.patch b/target/linux/rockchip/patches-6.6/400-2-arm64-dts-rockchip-Fix-regulators-gmac-and-naming-on.patch
new file mode 100644
index 0000000000..1ff8220bde
--- /dev/null
+++ b/target/linux/rockchip/patches-6.6/400-2-arm64-dts-rockchip-Fix-regulators-gmac-and-naming-on.patch
@@ -0,0 +1,470 @@
+From cd909b668132acd6f846336f15abf5185cfc4dbc Mon Sep 17 00:00:00 2001
+From: Sebastian Kropatsch <seb-dev at mail.de>
+Date: Wed, 12 Jun 2024 22:48:11 +0200
+Subject: [PATCH 2/5] arm64: dts: rockchip: Fix regulators, gmac and naming on
+ NanoPi R6C/R6S
+
+Fix the alphabetical ordering in some nodes and rename some regulators
+and pins to match the schematics [1][2] as well as to adhere to
+preferred naming schemes.
+
+In addition to that:
+* vcc_3v3_sd_s0: Fix voltage to be 3.3V
+* vcc3v3_pcie:
+ - Move to NanoPi R6C, this power switch is not available on R6S
+ - Fix vin-supply (is vcc_5v0 per schematics)
+ - Add gpios/pincrtl to enable power
+* vcc5v0_usb: Remove this regulator since according to the schematics,
+ vcc5v0_host_20 and vcc5v0_usb_otg0 are directly powered by vcc_5v0
+* gmac1: Add rx_delay of 0 (no delay since phy-mode = "rgmii-rxid")
+* rgmii_phy1: Add phy-supply as seen in schematics
+* pcie2*:
+ - Add pinctrl reset pins
+ - Update vpcie3v3-supply to match the schematics
+* sdhci: Add vmmc-supply and vqmmc-supply
+
+Links:
+[1] https://wiki.friendlyelec.com/wiki/images/f/f7/NanoPi_R6C_2302_SCH.PDF
+[2] https://wiki.friendlyelec.com/wiki/images/2/2f/NanoPi_R6S_2208_SCH.PDF
+
+Fixes: f1b11f43b3e9 ("arm64: dts: rockchip: Add support for NanoPi R6S")
+Signed-off-by: Sebastian Kropatsch <seb-dev at mail.de>
+---
+ .../boot/dts/rockchip/rk3588s-nanopi-r6.dtsi | 169 +++++++++---------
+ .../boot/dts/rockchip/rk3588s-nanopi-r6c.dts | 28 +++
+ .../boot/dts/rockchip/rk3588s-nanopi-r6s.dts | 5 +
+ 3 files changed, 122 insertions(+), 80 deletions(-)
+
+--- a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi
++++ b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi
+@@ -21,7 +21,7 @@
+ stdout-path = "serial2:1500000n8";
+ };
+
+- adc-keys {
++ adc-key-maskrom {
+ compatible = "adc-keys";
+ io-channels = <&saradc 0>;
+ io-channel-names = "buttons";
+@@ -41,10 +41,10 @@
+ pinctrl-0 = <&key1_pin>;
+
+ button-user {
+- label = "User";
+- linux,code = <BTN_1>;
+- gpios = <&gpio1 RK_PC0 GPIO_ACTIVE_LOW>;
+ debounce-interval = <50>;
++ gpios = <&gpio1 RK_PC0 GPIO_ACTIVE_LOW>;
++ label = "User Button";
++ linux,code = <BTN_1>;
+ };
+ };
+
+@@ -80,26 +80,27 @@
+ };
+ };
+
+- vcc5v0_sys: vcc5v0-sys-regulator {
++ vcc_5v0: regulator-vcc-5v0 {
+ compatible = "regulator-fixed";
+- regulator-name = "vcc5v0_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
++ regulator-name = "vcc_5v0";
+ };
+
+- vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator {
++ vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 {
+ compatible = "regulator-fixed";
+- regulator-name = "vcc_1v1_nldo_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+- vin-supply = <&vcc5v0_sys>;
++ regulator-name = "vcc_1v1_nldo_s3";
++ vin-supply = <&vcc_5v0>;
+ };
+
+- vcc_3v3_s0: vcc-3v3-s0-regulator {
++ /* SY6280AAC power switch (U3824 in schematics) */
++ vcc_3v3_s0: regulator-vcc-3v3-s0 {
+ compatible = "regulator-fixed";
+ regulator-always-on;
+ regulator-boot-on;
+@@ -109,61 +110,45 @@
+ vin-supply = <&vcc_3v3_s3>;
+ };
+
+- vcc_3v3_sd_s0: vcc-3v3-sd-s0-regulator {
++ vcc_3v3_sd_s0: regulator-vcc-3v3-sd-s0 {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd_s0_pwr>;
+- regulator-name = "vcc_3v3_sd_s0";
+- regulator-boot-on;
+- regulator-max-microvolt = <3000000>;
+- regulator-min-microvolt = <3000000>;
+- vin-supply = <&vcc_3v3_s3>;
+- };
+-
+- vcc_3v3_pcie20: vcc3v3-pcie20-regulator {
+- compatible = "regulator-fixed";
+- regulator-name = "vcc_3v3_pcie20";
+- regulator-always-on;
+ regulator-boot-on;
+- regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
++ regulator-min-microvolt = <3300000>;
++ regulator-name = "vcc_3v3_sd_s0";
+ vin-supply = <&vcc_3v3_s3>;
+ };
+
+- vcc5v0_usb: vcc5v0-usb-regulator {
+- compatible = "regulator-fixed";
+- regulator-name = "vcc5v0_usb";
+- regulator-always-on;
+- regulator-boot-on;
+- regulator-min-microvolt = <5000000>;
+- regulator-max-microvolt = <5000000>;
+- vin-supply = <&vcc5v0_sys>;
+- };
+-
+- vcc5v0_usb_otg0: vcc5v0-usb-otg0-regulator {
++ /* SY6280AAC power switch (U9539 in schematics) */
++ /* For USB 2.0 Type-A port */
++ vcc_5v0_host_20: regulator-vcc-5v0-host-20 {
+ compatible = "regulator-fixed";
+ enable-active-high;
+- gpios = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
++ gpios = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+- pinctrl-0 = <&typec5v_pwren>;
+- regulator-name = "vcc5v0_usb_otg0";
++ pinctrl-0 = <&usb_host_pwren_h>;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+- vin-supply = <&vcc5v0_usb>;
++ regulator-name = "vcc_5v0_host_20";
++ vin-supply = <&vcc_5v0>;
+ };
+
+- vcc5v0_host_20: vcc5v0-host-20-regulator {
++ /* SY6280AAC power switch (U9538 in schematics) */
++ /* For USB 3.0 Type-A port */
++ vcc5v0_usb_otg0: regulator-vcc5v0-usb-otg0 {
+ compatible = "regulator-fixed";
+ enable-active-high;
+- gpios = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
++ gpios = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+- pinctrl-0 = <&vcc5v0_host20_en>;
+- regulator-name = "vcc5v0_host_20";
++ pinctrl-0 = <&typec5v_pwren_h>;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+- vin-supply = <&vcc5v0_usb>;
++ regulator-name = "vcc5v0_usb_otg0";
++ vin-supply = <&vcc_5v0>;
+ };
+ };
+
+@@ -211,12 +196,13 @@
+ clock_in_out = "output";
+ phy-handle = <&rgmii_phy1>;
+ phy-mode = "rgmii-rxid";
++ pinctrl-names = "default";
+ pinctrl-0 = <&gmac1_miim
+ &gmac1_tx_bus2
+ &gmac1_rx_bus2
+ &gmac1_rgmii_clk
+ &gmac1_rgmii_bus>;
+- pinctrl-names = "default";
++ rx_delay = <0x00>;
+ tx_delay = <0x42>;
+ status = "okay";
+ };
+@@ -230,13 +216,13 @@
+ compatible = "rockchip,rk8602";
+ reg = <0x42>;
+ fcs,suspend-voltage-selector = <1>;
+- regulator-name = "vdd_cpu_big0_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <1050000>;
++ regulator-name = "vdd_cpu_big0_s0";
+ regulator-ramp-delay = <2300>;
+- vin-supply = <&vcc5v0_sys>;
++ vin-supply = <&vcc_5v0>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+@@ -247,13 +233,13 @@
+ compatible = "rockchip,rk8603", "rockchip,rk8602";
+ reg = <0x43>;
+ fcs,suspend-voltage-selector = <1>;
+- regulator-name = "vdd_cpu_big1_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <1050000>;
++ regulator-name = "vdd_cpu_big1_s0";
+ regulator-ramp-delay = <2300>;
+- vin-supply = <&vcc5v0_sys>;
++ vin-supply = <&vcc_5v0>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+@@ -268,13 +254,13 @@
+ compatible = "rockchip,rk8602";
+ reg = <0x42>;
+ fcs,suspend-voltage-selector = <1>;
+- regulator-name = "vdd_npu_s0";
++ regulator-always-on;
++ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <950000>;
++ regulator-name = "vdd_npu_s0";
+ regulator-ramp-delay = <2300>;
+- regulator-boot-on;
+- regulator-always-on;
+- vin-supply = <&vcc5v0_sys>;
++ vin-supply = <&vcc_5v0>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+@@ -293,35 +279,43 @@
+ reg = <0x51>;
+ #clock-cells = <0>;
+ clock-output-names = "hym8563";
+- pinctrl-names = "default";
+- pinctrl-0 = <&rtc_int>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&rtc_int>;
+ wakeup-source;
+ };
+ };
+
++/* RTL8211F-CG Ethernet */
+ &mdio1 {
+ rgmii_phy1: ethernet-phy at 1 {
+ compatible = "ethernet-phy-id001c.c916";
+ reg = <0x1>;
++ phy-supply = <&vcc_3v3_s0>;
+ pinctrl-names = "default";
+- pinctrl-0 = <&rtl8211f_rst>;
++ pinctrl-0 = <&gmac1_rstn_l>;
+ reset-assert-us = <20000>;
+ reset-deassert-us = <100000>;
+ reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+ };
+ };
+
++/* RTL8125BG Ethernet */
+ &pcie2x1l1 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pcie20x1_1_perstn_m2>;
+ reset-gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_HIGH>;
+- vpcie3v3-supply = <&vcc_3v3_pcie20>;
++ vpcie3v3-supply = <&vcc_3v3_s3>;
+ status = "okay";
+ };
+
++/* R6C: M.2 M-Key socket */
++/* R6S: RTL8125BG Ethernet */
+ &pcie2x1l2 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pcie20x1_2_perstn_m0>;
+ reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
+- vpcie3v3-supply = <&vcc_3v3_pcie20>;
+ status = "okay";
+ };
+
+@@ -360,24 +354,34 @@
+ };
+ };
+
++ pcie {
++ pcie20x1_1_perstn_m2: pcie2x1-1-rst {
++ rockchip,pins = <1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++
++ pcie20x1_2_perstn_m0: pcie2x1-2-rst {
++ rockchip,pins = <3 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++ };
++
+ sdmmc {
+- sd_s0_pwr: sd-s0-pwr {
++ sd_s0_pwr: sd-pwr {
+ rockchip,pins = <4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ usb {
+- typec5v_pwren: typec5v-pwren {
++ typec5v_pwren_h: usb3-pwren {
+ rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+- vcc5v0_host20_en: vcc5v0-host20-en {
++ usb_host_pwren_h: usb2-pwren {
+ rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ rtl8211f {
+- rtl8211f_rst: rtl8211f-rst {
++ gmac1_rstn_l: rtl8211f-rst {
+ rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+@@ -388,15 +392,19 @@
+ status = "okay";
+ };
+
++/* eMMC */
+ &sdhci {
+ bus-width = <8>;
+- no-sdio;
++ mmc-hs200-1_8v;
+ no-sd;
++ no-sdio;
+ non-removable;
+- mmc-hs200-1_8v;
++ vmmc-supply = <&vcc_3v3_s3>;
++ vqmmc-supply = <&vcc_1v8_s3>;
+ status = "okay";
+ };
+
++/* microSD card */
+ &sdmmc {
+ bus-width = <4>;
+ cap-sd-highspeed;
+@@ -411,16 +419,15 @@
+ };
+
+ &spi2 {
+- status = "okay";
+ assigned-clocks = <&cru CLK_SPI2>;
+ assigned-clock-rates = <200000000>;
++ num-cs = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
+- num-cs = <1>;
++ status = "okay";
+
+- pmic at 0 {
++ rk806_single: pmic at 0 {
+ compatible = "rockchip,rk806";
+- spi-max-frequency = <1000000>;
+ reg = <0x0>;
+
+ interrupt-parent = <&gpio0>;
+@@ -430,23 +437,24 @@
+ pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
+ <&rk806_dvs2_null>, <&rk806_dvs3_null>;
+
++ spi-max-frequency = <1000000>;
+ system-power-controller;
+
+- vcc1-supply = <&vcc5v0_sys>;
+- vcc2-supply = <&vcc5v0_sys>;
+- vcc3-supply = <&vcc5v0_sys>;
+- vcc4-supply = <&vcc5v0_sys>;
+- vcc5-supply = <&vcc5v0_sys>;
+- vcc6-supply = <&vcc5v0_sys>;
+- vcc7-supply = <&vcc5v0_sys>;
+- vcc8-supply = <&vcc5v0_sys>;
+- vcc9-supply = <&vcc5v0_sys>;
+- vcc10-supply = <&vcc5v0_sys>;
++ vcc1-supply = <&vcc_5v0>;
++ vcc2-supply = <&vcc_5v0>;
++ vcc3-supply = <&vcc_5v0>;
++ vcc4-supply = <&vcc_5v0>;
++ vcc5-supply = <&vcc_5v0>;
++ vcc6-supply = <&vcc_5v0>;
++ vcc7-supply = <&vcc_5v0>;
++ vcc8-supply = <&vcc_5v0>;
++ vcc9-supply = <&vcc_5v0>;
++ vcc10-supply = <&vcc_5v0>;
+ vcc11-supply = <&vcc_2v0_pldo_s3>;
+- vcc12-supply = <&vcc5v0_sys>;
++ vcc12-supply = <&vcc_5v0>;
+ vcc13-supply = <&vcc_1v1_nldo_s3>;
+ vcc14-supply = <&vcc_1v1_nldo_s3>;
+- vcca-supply = <&vcc5v0_sys>;
++ vcca-supply = <&vcc_5v0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+@@ -745,10 +753,11 @@
+ };
+
+ &u2phy2_host {
+- phy-supply = <&vcc5v0_host_20>;
++ phy-supply = <&vcc_5v0_host_20>;
+ status = "okay";
+ };
+
++/* Debug UART */
+ &uart2 {
+ pinctrl-0 = <&uart2m0_xfer>;
+ status = "okay";
+--- a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6c.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6c.dts
+@@ -7,8 +7,36 @@
+ / {
+ model = "FriendlyElec NanoPi R6C";
+ compatible = "friendlyarm,nanopi-r6c", "rockchip,rk3588s";
++
++ /* MP2143DJ power switch (U9536 in schematics) */
++ vcc3v3_pcie: regulator-vcc3v3-pcie {
++ compatible = "regulator-fixed";
++ enable-active-high;
++ gpios = <&gpio3 RK_PC6 GPIO_ACTIVE_HIGH>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&pcie20x1_2_con_pwren>;
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-name = "vcc3v3_pcie";
++ vin-supply = <&vcc_5v0>;
++ };
+ };
+
+ &lan2_led {
+ label = "user_led";
+ };
++
++/* M.2 M-Key socket */
++&pcie2x1l2 {
++ vpcie3v3-supply = <&vcc3v3_pcie>;
++};
++
++&pinctrl {
++ pcie {
++ pcie20x1_2_con_pwren: pcie20x1-2-con-pwren {
++ rockchip,pins = <3 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++ };
++};
+--- a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6s.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6s.dts
+@@ -12,3 +12,8 @@
+ &lan2_led {
+ label = "lan2_led";
+ };
++
++/* RTL8125BG Ethernet */
++&pcie2x1l2 {
++ vpcie3v3-supply = <&vcc_3v3_s3>;
++};
diff --git a/target/linux/rockchip/patches-6.6/400-3-arm64-dts-rockchip-Improve-LEDs-on-NanoPi-R6C-R6S.patch b/target/linux/rockchip/patches-6.6/400-3-arm64-dts-rockchip-Improve-LEDs-on-NanoPi-R6C-R6S.patch
new file mode 100644
index 0000000000..8ca0ed5880
--- /dev/null
+++ b/target/linux/rockchip/patches-6.6/400-3-arm64-dts-rockchip-Improve-LEDs-on-NanoPi-R6C-R6S.patch
@@ -0,0 +1,184 @@
+From dfa0e0a42f3e256189849a45203aac98a0b4d1aa Mon Sep 17 00:00:00 2001
+From: Sebastian Kropatsch <seb-dev at mail.de>
+Date: Wed, 12 Jun 2024 22:48:12 +0200
+Subject: [PATCH 3/5] arm64: dts: rockchip: Improve LEDs on NanoPi R6C/R6S
+
+Move led-3 node into NanoPi R6C/R6S's source files since they have
+different functionalities on each board: On the R6S this LED is used
+to signal LAN2 link up, while on the R6C this LED does not have a
+pre-defined purpose.
+
+In addition to that:
+ - Remove deprecated label property
+ - Add color and function properties
+ - Add linux,default-trigger to trigger on Ethernet link
+
+Signed-off-by: Sebastian Kropatsch <seb-dev at mail.de>
+---
+ .../boot/dts/rockchip/rk3588s-nanopi-r6.dtsi | 32 +++++++------------
+ .../boot/dts/rockchip/rk3588s-nanopi-r6c.dts | 22 ++++++++++---
+ .../boot/dts/rockchip/rk3588s-nanopi-r6s.dts | 26 +++++++++++++--
+ 3 files changed, 54 insertions(+), 26 deletions(-)
+
+--- a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi
++++ b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi
+@@ -8,6 +8,7 @@
+ #include <dt-bindings/pinctrl/rockchip.h>
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/input/input.h>
++#include <dt-bindings/leds/common.h>
+ #include "rk3588s.dtsi"
+
+ / {
+@@ -52,7 +53,8 @@
+ compatible = "gpio-leds";
+
+ sys_led: led-0 {
+- label = "sys_led";
++ color = <LED_COLOR_ID_RED>;
++ function = LED_FUNCTION_HEARTBEAT;
+ gpios = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ pinctrl-names = "default";
+@@ -60,24 +62,22 @@
+ };
+
+ wan_led: led-1 {
+- label = "wan_led";
++ color = <LED_COLOR_ID_GREEN>;
++ function = LED_FUNCTION_WAN;
+ gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>;
++ linux,default-trigger = "stmmac-0:01:link";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wan_led_pin>;
+ };
+
+ lan1_led: led-2 {
+- label = "lan1_led";
++ color = <LED_COLOR_ID_GREEN>;
++ function = LED_FUNCTION_LAN;
+ gpios = <&gpio1 RK_PC3 GPIO_ACTIVE_HIGH>;
++ linux,default-trigger = "r8169-3-3100:00:link";
+ pinctrl-names = "default";
+ pinctrl-0 = <&lan1_led_pin>;
+ };
+-
+- lan2_led: led-3 {
+- gpios = <&gpio1 RK_PC4 GPIO_ACTIVE_HIGH>;
+- pinctrl-names = "default";
+- pinctrl-0 = <&lan2_led_pin>;
+- };
+ };
+
+ vcc_5v0: regulator-vcc-5v0 {
+@@ -328,23 +328,15 @@
+
+ gpio-leds {
+ sys_led_pin: sys-led-pin {
+- rockchip,pins =
+- <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
++ rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ wan_led_pin: wan-led-pin {
+- rockchip,pins =
+- <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
++ rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ lan1_led_pin: lan1-led-pin {
+- rockchip,pins =
+- <1 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
+- };
+-
+- lan2_led_pin: lan2-led-pin {
+- rockchip,pins =
+- <1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
++ rockchip,pins = <1 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+--- a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6c.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6c.dts
+@@ -8,6 +8,18 @@
+ model = "FriendlyElec NanoPi R6C";
+ compatible = "friendlyarm,nanopi-r6c", "rockchip,rk3588s";
+
++ leds {
++ compatible = "gpio-leds";
++
++ led1_led: led-3 {
++ color = <LED_COLOR_ID_GREEN>;
++ function = "led1";
++ gpios = <&gpio1 RK_PC4 GPIO_ACTIVE_HIGH>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&led1_led_pin>;
++ };
++ };
++
+ /* MP2143DJ power switch (U9536 in schematics) */
+ vcc3v3_pcie: regulator-vcc3v3-pcie {
+ compatible = "regulator-fixed";
+@@ -24,16 +36,18 @@
+ };
+ };
+
+-&lan2_led {
+- label = "user_led";
+-};
+-
+ /* M.2 M-Key socket */
+ &pcie2x1l2 {
+ vpcie3v3-supply = <&vcc3v3_pcie>;
+ };
+
+ &pinctrl {
++ gpio-leds {
++ led1_led_pin: led1-led-pin {
++ rockchip,pins = <1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++ };
++
+ pcie {
+ pcie20x1_2_con_pwren: pcie20x1-2-con-pwren {
+ rockchip,pins = <3 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+--- a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6s.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6s.dts
+@@ -7,13 +7,35 @@
+ / {
+ model = "FriendlyElec NanoPi R6S";
+ compatible = "friendlyarm,nanopi-r6s", "rockchip,rk3588s";
++
++ leds {
++ compatible = "gpio-leds";
++
++ lan2_led: led-3 {
++ color = <LED_COLOR_ID_GREEN>;
++ function = LED_FUNCTION_LAN;
++ function-enumerator = <2>;
++ gpios = <&gpio1 RK_PC4 GPIO_ACTIVE_HIGH>;
++ linux,default-trigger = "r8169-4-4100:00:link";
++ pinctrl-names = "default";
++ pinctrl-0 = <&lan2_led_pin>;
++ };
++ };
+ };
+
+-&lan2_led {
+- label = "lan2_led";
++&lan1_led {
++ function-enumerator = <1>;
+ };
+
+ /* RTL8125BG Ethernet */
+ &pcie2x1l2 {
+ vpcie3v3-supply = <&vcc_3v3_s3>;
+ };
++
++&pinctrl {
++ gpio-leds {
++ lan2_led_pin: lan2-led-pin {
++ rockchip,pins = <1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++ };
++};
diff --git a/target/linux/rockchip/patches-6.6/400-4-arm64-dts-rockchip-Enable-lower-USB3-port-on-NanoPi-.patch b/target/linux/rockchip/patches-6.6/400-4-arm64-dts-rockchip-Enable-lower-USB3-port-on-NanoPi-.patch
new file mode 100644
index 0000000000..c154f97cd7
--- /dev/null
+++ b/target/linux/rockchip/patches-6.6/400-4-arm64-dts-rockchip-Enable-lower-USB3-port-on-NanoPi-.patch
@@ -0,0 +1,62 @@
+From e067643b4e321db4de3274198b13732cce37f5c1 Mon Sep 17 00:00:00 2001
+From: Sebastian Kropatsch <seb-dev at mail.de>
+Date: Wed, 12 Jun 2024 22:48:13 +0200
+Subject: [PATCH 4/5] arm64: dts: rockchip: Enable lower USB3 port on NanoPi
+ R6C/R6S
+
+Enable support for the lower USB 3.0 Type-A port on the NanoPi R6C and
+NanoPi R6S. The upper USB 2.0 Type-A port is already supported.
+
+Signed-off-by: Sebastian Kropatsch <seb-dev at mail.de>
+---
+ .../boot/dts/rockchip/rk3588s-nanopi-r6.dtsi | 28 +++++++++++++++++++
+ 1 file changed, 28 insertions(+)
+
+--- a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi
++++ b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi
+@@ -740,6 +740,17 @@
+ status = "okay";
+ };
+
++/* USB2 PHY for USB 3.0 Type-A (lower port)*/
++&u2phy0 {
++ status = "okay";
++};
++
++&u2phy0_otg {
++ phy-supply = <&vcc5v0_usb_otg0>;
++ status = "okay";
++};
++
++/* USB2 PHY for USB 2.0 Type-A (upper port)*/
+ &u2phy2 {
+ status = "okay";
+ };
+@@ -755,10 +766,27 @@
+ status = "okay";
+ };
+
++/* USB 2.0 Type-A (upper port) */
++/* PHY: <&u2phy2_host> */
+ &usb_host0_ehci {
+ status = "okay";
+ };
+
++/* USB 2.0 Type-A (upper port) */
++/* PHY: <&u2phy2_host> */
+ &usb_host0_ohci {
+ status = "okay";
+ };
++
++/* USB 3.0 Type-A (lower port) */
++/* PHYs: <&u2phy0_otg>, <&usbdp_phy0> */
++&usb_host0_xhci {
++ dr_mode = "host";
++ extcon = <&u2phy0>;
++ status = "okay";
++};
++
++/* USB3 PHY for USB 3.0 Type-A (lower port)*/
++&usbdp_phy0 {
++ status = "okay";
++};
diff --git a/target/linux/rockchip/patches-6.6/400-5-arm64-dts-rockchip-Enable-GPU-on-NanoPi-R6C-R6S.patch b/target/linux/rockchip/patches-6.6/400-5-arm64-dts-rockchip-Enable-GPU-on-NanoPi-R6C-R6S.patch
new file mode 100644
index 0000000000..5e2e70afbc
--- /dev/null
+++ b/target/linux/rockchip/patches-6.6/400-5-arm64-dts-rockchip-Enable-GPU-on-NanoPi-R6C-R6S.patch
@@ -0,0 +1,27 @@
+From 04cd713c3834b87fcd147e4bf7b7066cfe60fffc Mon Sep 17 00:00:00 2001
+From: Sebastian Kropatsch <seb-dev at mail.de>
+Date: Wed, 12 Jun 2024 22:48:14 +0200
+Subject: [PATCH 5/5] arm64: dts: rockchip: Enable GPU on NanoPi R6C/R6S
+
+Enable the Mali GPU on the FriendlyElec NanoPi R6C and R6S.
+
+Signed-off-by: Sebastian Kropatsch <seb-dev at mail.de>
+---
+ arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi | 6 ++++++
+ 1 file changed, 6 insertions(+)
+
+--- a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi
++++ b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi
+@@ -207,6 +207,12 @@
+ status = "okay";
+ };
+
++&gpu {
++ mali-supply = <&vdd_gpu_s0>;
++ sram-supply = <&vdd_gpu_mem_s0>;
++ status = "okay";
++};
++
+ &i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0m2_xfer>;
More information about the lede-commits
mailing list