[openwrt/openwrt] realtek: 6.6: rework VPE patches
LEDE Commits
lede-commits at lists.infradead.org
Sat Sep 14 12:30:04 PDT 2024
svanheule pushed a commit to openwrt/openwrt.git, branch main:
https://git.openwrt.org/1eac02b60d73ed3082866a84750938ca2040aa4c
commit 1eac02b60d73ed3082866a84750938ca2040aa4c
Author: Markus Stockhausen <markus.stockhausen at gmx.de>
AuthorDate: Mon Sep 9 01:45:20 2024 -0400
realtek: 6.6: rework VPE patches
VPE in mainline kernel has changed a lot. This patch wraps up the 5.15
patch files and rebases them in one single patch on top of kernel 6.6.
Former patches are
315-irqchip-irq-realtek-rtl-add-VPE-support.patch
319-irqchip-irq-realtek-rtl-fix-VPE-affinity.patch
Submitted-by: Birger Koblitz <git at birger-koblitz.de>
Submitted-by: INAGAKI Hiroshi <musashino.open at gmail.com>
Signed-off-by: Markus Stockhausen <markus.stockhausen at gmx.de>
---
...-irqchip-irq-realtek-rtl-add-VPE-support.patch} | 293 +++++++++++----------
...-irqchip-irq-realtek-rtl-fix-VPE-affinity.patch | 159 -----------
2 files changed, 159 insertions(+), 293 deletions(-)
diff --git a/target/linux/realtek/patches-6.6/315-irqchip-irq-realtek-rtl-add-VPE-support.patch b/target/linux/realtek/patches-6.6/314-irqchip-irq-realtek-rtl-add-VPE-support.patch
similarity index 60%
rename from target/linux/realtek/patches-6.6/315-irqchip-irq-realtek-rtl-add-VPE-support.patch
rename to target/linux/realtek/patches-6.6/314-irqchip-irq-realtek-rtl-add-VPE-support.patch
index 102c9850ce..4610ca8c19 100644
--- a/target/linux/realtek/patches-6.6/315-irqchip-irq-realtek-rtl-add-VPE-support.patch
+++ b/target/linux/realtek/patches-6.6/314-irqchip-irq-realtek-rtl-add-VPE-support.patch
@@ -3,23 +3,33 @@ From: Birger Koblitz <git at birger-koblitz.de>
Date: Fri, 31 Dec 2021 11:56:49 +0100
Subject: [PATCH] realtek: Add VPE support for the IRQ driver
-In order to support VSMP, enable support for both VPEs
-of the RTL839X and RTL930X SoCs in the irq-realtek-rtl
-driver. Add support for IRQ affinity setting.
+In order to support VSMP, enable support for both VPEs of the RTL839X
+and RTL930X SoCs in the irq-realtek-rtl driver. Add support for IRQ
+affinity setting.
+
+Up to kernel 5.15 this patch was divided into two parts
+
+315-irqchip-irq-realtek-rtl-add-VPE-support.patch
+319-irqchip-irq-realtek-rtl-fix-VPE-affinity.patch
+
+As both parts will only work in combination they have been merged into
+one patch.
Submitted-by: Birger Koblitz <git at birger-koblitz.de>
+Submitted-by: INAGAKI Hiroshi <musashino.open at gmail.com>
+Signed-off-by: Markus Stockhausen <markus.stockhausen at gmx.de>
---
- drivers/irqchip/irq-realtek-rtl.c | 152 +++++++++++++++---
- 1 file changed, 73 insertions(+), 76 deletions(-)
+ drivers/irqchip/irq-realtek-rtl.c | 296 +++++++++++++++++++++++++-----
+ 1 file changed, 249 insertions(+), 47 deletions(-)
--- a/drivers/irqchip/irq-realtek-rtl.c
+++ b/drivers/irqchip/irq-realtek-rtl.c
-@@ -21,21 +21,63 @@
- #define RTL_ICTL_IRR2 0x10
+@@ -22,22 +22,58 @@
#define RTL_ICTL_IRR3 0x14
+ #define RTL_ICTL_NUM_INPUTS 32
+-
-#define REG(x) (realtek_ictl_base + x)
-+#define RTL_ICTL_NUM_INPUTS 32
+#define RTL_ICTL_NUM_OUTPUTS 15
static DEFINE_RAW_SPINLOCK(irq_lock);
@@ -27,6 +37,7 @@ Submitted-by: Birger Koblitz <git at birger-koblitz.de>
+
+#define REG(offset, cpu) (realtek_ictl_base[cpu] + offset)
+
++static u32 realtek_ictl_unmask[NR_CPUS];
+static void __iomem *realtek_ictl_base[NR_CPUS];
+static cpumask_t realtek_ictl_cpu_configurable;
+
@@ -38,36 +49,74 @@ Submitted-by: Birger Koblitz <git at birger-koblitz.de>
+ struct irq_domain *domain;
+ u32 child_mask;
+};
+
+ /*
+- * IRR0-IRR3 store 4 bits per interrupt, but Realtek uses inverted numbering,
+- * placing IRQ 31 in the first four bits. A routing value of '0' means the
+- * interrupt is left disconnected. Routing values {1..15} connect to output
+- * lines {0..14}.
++ * Per CPU we have a set of 5 registers that determine interrupt handling for
++ * 32 external interrupts. GIMR (enable/disable interrupt) plus IRR0-IRR3 that
++ * contain "routing" or "priority" values. GIMR uses one bit for each interrupt
++ * and IRRx store 4 bits per interrupt. Realtek uses inverted numbering,
++ * placing IRQ 31 in the first four bits. The register combinations give the
++ * following results for a single interrupt in the wild:
++ *
++ * a) GIMR = 0 / IRRx > 0 -> no interrupts
++ * b) GIMR = 0 / IRRx = 0 -> no interrupts
++ * c) GIMR = 1 / IRRx > 0 -> interrupts
++ * d) GIMR = 1 / IRRx = 0 -> rare interrupts in SMP environment
++ *
++ * Combination d) seems to trigger interrupts only on a VPE if the other VPE
++ * has GIMR = 0 and IRRx > 0. E.g. busy without interrupts allowed. To provide
++ * IRQ balancing features in SMP this driver will handle the registers as
++ * follows:
++ *
++ * 1) set IRRx > 0 for VPE where the interrupt is desired
++ * 2) set IRRx = 0 for VPE where the interrupt is not desired
++ * 3) set both GIMR = 0 to mask (disabled) interrupt
++ * 4) set GIMR = 1 to unmask (enable) interrupt but only for VPE where IRRx > 0
+ */
+
-+/*
-+ * IRR0-IRR3 store 4 bits per interrupt, but Realtek uses inverted numbering,
-+ * placing IRQ 31 in the first four bits. A routing value of '0' means the
-+ * interrupt is left disconnected. Routing values {1..15} connect to output
-+ * lines {0..14}.
-+ */
-+#define IRR_OFFSET(idx) (4 * (3 - (idx * 4) / 32))
-+#define IRR_SHIFT(idx) ((idx * 4) % 32)
-+
+ #define IRR_OFFSET(idx) (4 * (3 - (idx * 4) / 32))
+ #define IRR_SHIFT(idx) ((idx * 4) % 32)
+
+-static void write_irr(void __iomem *irr0, int idx, u32 value)
+static inline u32 read_irr(void __iomem *irr0, int idx)
+{
+ return (readl(irr0 + IRR_OFFSET(idx)) >> IRR_SHIFT(idx)) & 0xf;
+}
+
+static inline void write_irr(void __iomem *irr0, int idx, u32 value)
+ {
+ unsigned int offset = IRR_OFFSET(idx);
+ unsigned int shift = IRR_SHIFT(idx);
+@@ -48,16 +84,33 @@ static void write_irr(void __iomem *irr0
+ writel(irr, irr0 + offset);
+ }
+
++static inline void enable_gimr(int hwirq, int cpu)
+{
-+ unsigned int offset = IRR_OFFSET(idx);
-+ unsigned int shift = IRR_SHIFT(idx);
-+ u32 irr;
++ u32 value;
+
-+ irr = readl(irr0 + offset) & ~(0xf << shift);
-+ irr |= (value & 0xf) << shift;
-+ writel(irr, irr0 + offset);
++ value = readl(REG(RTL_ICTL_GIMR, cpu));
++ value |= (BIT(hwirq) & realtek_ictl_unmask[cpu]);
++ writel(value, REG(RTL_ICTL_GIMR, cpu));
+}
-
++
++static inline void disable_gimr(int hwirq, int cpu)
++{
++ u32 value;
++
++ value = readl(REG(RTL_ICTL_GIMR, cpu));
++ value &= ~BIT(hwirq);
++ writel(value, REG(RTL_ICTL_GIMR, cpu));
++}
++
static void realtek_ictl_unmask_irq(struct irq_data *i)
{
unsigned long flags;
- u32 value;
+- u32 value;
+ int cpu;
raw_spin_lock_irqsave(&irq_lock, flags);
@@ -75,18 +124,16 @@ Submitted-by: Birger Koblitz <git at birger-koblitz.de>
- value = readl(REG(RTL_ICTL_GIMR));
- value |= BIT(i->hwirq);
- writel(value, REG(RTL_ICTL_GIMR));
-+ for_each_cpu(cpu, &realtek_ictl_cpu_configurable) {
-+ value = readl(REG(RTL_ICTL_GIMR, cpu));
-+ value |= BIT(i->hwirq);
-+ writel(value, REG(RTL_ICTL_GIMR, cpu));
-+ }
++ for_each_cpu(cpu, &realtek_ictl_cpu_configurable)
++ enable_gimr(i->hwirq, cpu);
raw_spin_unlock_irqrestore(&irq_lock, flags);
}
-@@ -44,52 +86,137 @@ static void realtek_ictl_mask_irq(struct
+@@ -65,110 +118,259 @@ static void realtek_ictl_unmask_irq(stru
+ static void realtek_ictl_mask_irq(struct irq_data *i)
{
unsigned long flags;
- u32 value;
+- u32 value;
+ int cpu;
raw_spin_lock_irqsave(&irq_lock, flags);
@@ -94,11 +141,8 @@ Submitted-by: Birger Koblitz <git at birger-koblitz.de>
- value = readl(REG(RTL_ICTL_GIMR));
- value &= ~BIT(i->hwirq);
- writel(value, REG(RTL_ICTL_GIMR));
-+ for_each_cpu(cpu, &realtek_ictl_cpu_configurable) {
-+ value = readl(REG(RTL_ICTL_GIMR, cpu));
-+ value &= ~BIT(i->hwirq);
-+ writel(value, REG(RTL_ICTL_GIMR, cpu));
-+ }
++ for_each_cpu(cpu, &realtek_ictl_cpu_configurable)
++ disable_gimr(i->hwirq, cpu);
raw_spin_unlock_irqrestore(&irq_lock, flags);
}
@@ -120,11 +164,17 @@ Submitted-by: Birger Koblitz <git at birger-koblitz.de>
+ cpumask_and(&cpu_enable, &cpu_configure, dest);
+ cpumask_andnot(&cpu_disable, &cpu_configure, dest);
+
-+ for_each_cpu(cpu, &cpu_disable)
++ for_each_cpu(cpu, &cpu_disable) {
+ write_irr(REG(RTL_ICTL_IRR0, cpu), i->hwirq, 0);
++ realtek_ictl_unmask[cpu] &= ~BIT(i->hwirq);
++ disable_gimr(i->hwirq, cpu);
++ }
+
-+ for_each_cpu(cpu, &cpu_enable)
++ for_each_cpu(cpu, &cpu_enable) {
+ write_irr(REG(RTL_ICTL_IRR0, cpu), i->hwirq, output->output_index + 1);
++ realtek_ictl_unmask[cpu] |= BIT(i->hwirq);
++ enable_gimr(i->hwirq, cpu);
++ }
+
+ irq_data_update_effective_affinity(i, &cpu_enable);
+
@@ -145,17 +195,19 @@ Submitted-by: Birger Koblitz <git at birger-koblitz.de>
static int intc_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw)
{
+ struct realtek_ictl_output *output = d->host_data;
-+ unsigned long flags;
-+
+ unsigned long flags;
+
irq_set_chip_and_handler(irq, &realtek_ictl_irq, handle_level_irq);
-+ raw_spin_lock_irqsave(&irq_lock, flags);
+ raw_spin_lock_irqsave(&irq_lock, flags);
+- write_irr(REG(RTL_ICTL_IRR0), hw, 1);
+
+ output->child_mask |= BIT(hw);
+ write_irr(REG(RTL_ICTL_IRR0, 0), hw, output->output_index + 1);
++ realtek_ictl_unmask[0] |= BIT(hw);
+
-+ raw_spin_unlock_irqrestore(&irq_lock, flags);
-+
+ raw_spin_unlock_irqrestore(&irq_lock, flags);
+
return 0;
}
@@ -229,84 +281,42 @@ Submitted-by: Birger Koblitz <git at birger-koblitz.de>
out:
chained_irq_exit(chip, desc);
-@@ -102,85 +229,110 @@ out:
- * thus go into 4 IRRs. A routing value of '0' means the interrupt is left
- * disconnected. Routing values {1..15} connect to output lines {0..14}.
- */
--static int __init map_interrupts(struct device_node *node, struct irq_domain *domain)
+ }
+
++/*
++ * SoC interrupts are cascaded to MIPS CPU interrupts according to the
++ * interrupt-map in the device tree. Each SoC interrupt gets 4 bits for
++ * the CPU interrupt in an Interrupt Routing Register. Max 32 SoC interrupts
++ * thus go into 4 IRRs. A routing value of '0' means the interrupt is left
++ * disconnected. Routing values {1..15} connect to output lines {0..14}.
++ */
+static int __init setup_parent_interrupts(struct device_node *node, int *parents,
+ unsigned int num_parents)
- {
-- struct device_node *cpu_ictl;
-- const __be32 *imap;
-- u32 imaplen, soc_int, cpu_int, tmp, regs[4];
-- int ret, i, irr_regs[] = {
-- RTL_ICTL_IRR3,
-- RTL_ICTL_IRR2,
-- RTL_ICTL_IRR1,
-- RTL_ICTL_IRR0,
-- };
-- u8 mips_irqs_set;
++{
+ struct realtek_ictl_output *outputs;
+ struct realtek_ictl_output *output;
+ struct irq_domain *domain;
+ unsigned int p;
-
-- ret = of_property_read_u32(node, "#address-cells", &tmp);
-- if (ret || tmp)
-- return -EINVAL;
++
+ outputs = kcalloc(num_parents, sizeof(*outputs), GFP_KERNEL);
+ if (!outputs)
+ return -ENOMEM;
-
-- imap = of_get_property(node, "interrupt-map", &imaplen);
-- if (!imap || imaplen % 3)
-- return -EINVAL;
++
+ for (p = 0; p < num_parents; p++) {
+ output = outputs + p;
-
-- mips_irqs_set = 0;
-- memset(regs, 0, sizeof(regs));
-- for (i = 0; i < imaplen; i += 3 * sizeof(u32)) {
-- soc_int = be32_to_cpup(imap);
-- if (soc_int > 31)
-- return -EINVAL;
--
-- cpu_ictl = of_find_node_by_phandle(be32_to_cpup(imap + 1));
-- if (!cpu_ictl)
-- return -EINVAL;
-- ret = of_property_read_u32(cpu_ictl, "#interrupt-cells", &tmp);
-- of_node_put(cpu_ictl);
-- if (ret || tmp != 1)
-- return -EINVAL;
--
-- cpu_int = be32_to_cpup(imap + 2);
-- if (cpu_int > 7 || cpu_int < 2)
-- return -EINVAL;
--
-- if (!(mips_irqs_set & BIT(cpu_int))) {
-- irq_set_chained_handler_and_data(cpu_int, realtek_irq_dispatch,
-- domain);
-- mips_irqs_set |= BIT(cpu_int);
-- }
++
+ domain = irq_domain_add_linear(node, RTL_ICTL_NUM_INPUTS, &irq_domain_ops, output);
+ if (!domain)
+ goto domain_err;
-
-- /* Use routing values (1..6) for CPU interrupts (2..7) */
-- regs[(soc_int * 4) / 32] |= (cpu_int - 1) << (soc_int * 4) % 32;
-- imap += 3;
-- }
++
+ output->fwnode = of_node_to_fwnode(node);
+ output->output_index = p;
+ output->domain = domain;
-
-- for (i = 0; i < 4; i++)
-- writel(regs[i], REG(irr_regs[i]));
++
+ irq_set_chained_handler_and_data(parents[p], realtek_irq_dispatch, output);
+ }
-
- return 0;
++
++ return 0;
+
+domain_err:
+ while (p--) {
@@ -317,65 +327,68 @@ Submitted-by: Birger Koblitz <git at birger-koblitz.de>
+ kfree(outputs);
+
+ return -ENOMEM;
- }
-
++}
++
static int __init realtek_rtl_of_init(struct device_node *node, struct device_node *parent)
{
-- struct irq_domain *domain;
-- int ret;
+ int parent_irqs[RTL_ICTL_NUM_OUTPUTS];
-+ struct of_phandle_args oirq;
+ struct of_phandle_args oirq;
+- struct irq_domain *domain;
+ unsigned int num_parents;
-+ unsigned int soc_irq;
+ unsigned int soc_irq;
+- int parent_irq;
+ unsigned int p;
+ int cpu;
+
+ cpumask_clear(&realtek_ictl_cpu_configurable);
-+
+
+- realtek_ictl_base = of_iomap(node, 0);
+- if (!realtek_ictl_base)
+ for (cpu = 0; cpu < NR_CPUS; cpu++) {
+ realtek_ictl_base[cpu] = of_iomap(node, cpu);
+ if (realtek_ictl_base[cpu]) {
+ cpumask_set_cpu(cpu, &realtek_ictl_cpu_configurable);
+
+ /* Disable all cascaded interrupts and clear routing */
-+ writel(0, REG(RTL_ICTL_GIMR, cpu));
-+ for (soc_irq = 0; soc_irq < RTL_ICTL_NUM_INPUTS; soc_irq++)
++ for (soc_irq = 0; soc_irq < RTL_ICTL_NUM_INPUTS; soc_irq++) {
+ write_irr(REG(RTL_ICTL_IRR0, cpu), soc_irq, 0);
++ realtek_ictl_unmask[cpu] &= ~BIT(soc_irq);
++ disable_gimr(soc_irq, cpu);
++ }
+ }
+ }
-
-- realtek_ictl_base = of_iomap(node, 0);
-- if (!realtek_ictl_base)
++
+ if (cpumask_empty(&realtek_ictl_cpu_configurable))
return -ENXIO;
-- /* Disable all cascaded interrupts */
+- /* Disable all cascaded interrupts and clear routing */
- writel(0, REG(RTL_ICTL_GIMR));
+- for (soc_irq = 0; soc_irq < RTL_ICTL_NUM_INPUTS; soc_irq++)
+- write_irr(REG(RTL_ICTL_IRR0), soc_irq, 0);
+ num_parents = of_irq_count(node);
+ if (num_parents > RTL_ICTL_NUM_OUTPUTS) {
+ pr_err("too many parent interrupts\n");
+ return -EINVAL;
+ }
-- domain = irq_domain_add_simple(node, 32, 0,
-- &irq_domain_ops, NULL);
+- if (WARN_ON(!of_irq_count(node))) {
+ for (p = 0; p < num_parents; p++)
+ parent_irqs[p] = of_irq_get(node, p);
-
-- ret = map_interrupts(node, domain);
-- if (ret) {
-- pr_err("invalid interrupt map\n");
-- return ret;
++
+ if (WARN_ON(!num_parents)) {
-+ /*
-+ * If DT contains no parent interrupts, assume MIPS CPU IRQ 2
-+ * (HW0) is connected to the first output. This is the case for
-+ * all known hardware anyway. "interrupt-map" is deprecated, so
-+ * don't bother trying to parse that.
+ /*
+ * If DT contains no parent interrupts, assume MIPS CPU IRQ 2
+ * (HW0) is connected to the first output. This is the case for
+ * all known hardware anyway. "interrupt-map" is deprecated, so
+ * don't bother trying to parse that.
+ * Since this is to account for old devicetrees with one-cell
+ * interrupt specifiers, only one output domain is needed.
-+ */
-+ oirq.np = of_find_compatible_node(NULL, NULL, "mti,cpu-interrupt-controller");
+ */
+ oirq.np = of_find_compatible_node(NULL, NULL, "mti,cpu-interrupt-controller");
+- oirq.args_count = 1;
+- oirq.args[0] = 2;
+-
+- parent_irq = irq_create_of_mapping(&oirq);
+ if (oirq.np) {
+ oirq.args_count = 1;
+ oirq.args[0] = 2;
@@ -383,11 +396,22 @@ Submitted-by: Birger Koblitz <git at birger-koblitz.de>
+ parent_irqs[0] = irq_create_of_mapping(&oirq);
+ num_parents = 1;
+ }
-+
-+ of_node_put(oirq.np);
+
+ of_node_put(oirq.np);
+- } else {
+- parent_irq = of_irq_get(node, 0);
}
-- return 0;
+- if (parent_irq < 0)
+- return parent_irq;
+- else if (!parent_irq)
+- return -ENODEV;
+-
+- domain = irq_domain_add_linear(node, RTL_ICTL_NUM_INPUTS, &irq_domain_ops, NULL);
+- if (!domain)
+- return -ENOMEM;
+-
+- irq_set_chained_handler_and_data(parent_irq, realtek_irq_dispatch, domain);
+ /* Ensure we haven't collected any errors before proceeding */
+ for (p = 0; p < num_parents; p++) {
+ if (parent_irqs[p] < 0)
@@ -395,7 +419,8 @@ Submitted-by: Birger Koblitz <git at birger-koblitz.de>
+ if (!parent_irqs[p])
+ return -ENODEV;
+ }
-+
+
+- return 0;
+ return setup_parent_interrupts(node, &parent_irqs[0], num_parents);
}
diff --git a/target/linux/realtek/patches-6.6/319-irqchip-irq-realtek-rtl-fix-VPE-affinity.patch b/target/linux/realtek/patches-6.6/319-irqchip-irq-realtek-rtl-fix-VPE-affinity.patch
deleted file mode 100644
index 0c29b7739e..0000000000
--- a/target/linux/realtek/patches-6.6/319-irqchip-irq-realtek-rtl-fix-VPE-affinity.patch
+++ /dev/null
@@ -1,159 +0,0 @@
-From 2cd00b51470a30198b048a5fca48a04db77e29cc Mon Sep 17 00:00:00 2001
-From: INAGAKI Hiroshi <musashino.open at gmail.com>
-Date: Fri, 21 May 2021 23:16:37 +0900
-Subject: [PATCH] realtek: backport irq-realtek-rtl driver from 5.12 to 5.10
-
-This patch backports "irq-realtek-rtl" driver to Kernel 5.10 from 5.12.
-"MACH_REALTEK_RTL" is used as a platform name in upstream, but "RTL838X"
-is used in OpenWrt, so update the dependency by the additional patch.
-
-Submitted-by: INAGAKI Hiroshi <musashino.open at gmail.com>
----
- drivers/irqchip/irq-realtek-rtl.c | 38 +++++++++++------
- 1 files changed, 58 insertions(+), 20 deletions(-)
-
---- a/drivers/irqchip/irq-realtek-rtl.c
-+++ b/drivers/irqchip/irq-realtek-rtl.c
-@@ -28,6 +28,7 @@ static DEFINE_RAW_SPINLOCK(irq_lock);
-
- #define REG(offset, cpu) (realtek_ictl_base[cpu] + offset)
-
-+static u32 realtek_ictl_unmask[NR_CPUS];
- static void __iomem *realtek_ictl_base[NR_CPUS];
- static cpumask_t realtek_ictl_cpu_configurable;
-
-@@ -41,11 +42,29 @@ struct realtek_ictl_output {
- };
-
- /*
-- * IRR0-IRR3 store 4 bits per interrupt, but Realtek uses inverted numbering,
-- * placing IRQ 31 in the first four bits. A routing value of '0' means the
-- * interrupt is left disconnected. Routing values {1..15} connect to output
-- * lines {0..14}.
-+ * Per CPU we have a set of 5 registers that determine interrupt handling for
-+ * 32 external interrupts. GIMR (enable/disable interrupt) plus IRR0-IRR3 that
-+ * contain "routing" or "priority" values. GIMR uses one bit for each interrupt
-+ * and IRRx store 4 bits per interrupt. Realtek uses inverted numbering,
-+ * placing IRQ 31 in the first four bits. The register combinations give the
-+ * following results for a single interrupt in the wild:
-+ *
-+ * a) GIMR = 0 / IRRx > 0 -> no interrupts
-+ * b) GIMR = 0 / IRRx = 0 -> no interrupts
-+ * c) GIMR = 1 / IRRx > 0 -> interrupts
-+ * d) GIMR = 1 / IRRx = 0 -> rare interrupts in SMP environment
-+ *
-+ * Combination d) seems to trigger interrupts only on a VPE if the other VPE
-+ * has GIMR = 0 and IRRx > 0. E.g. busy without interrupts allowed. To provide
-+ * IRQ balancing features in SMP this driver will handle the registers as
-+ * follows:
-+ *
-+ * 1) set IRRx > 0 for VPE where the interrupt is desired
-+ * 2) set IRRx = 0 for VPE where the interrupt is not desired
-+ * 3) set both GIMR = 0 to mask (disabled) interrupt
-+ * 4) set GIMR = 1 to unmask (enable) interrupt but only for VPE where IRRx > 0
- */
-+
- #define IRR_OFFSET(idx) (4 * (3 - (idx * 4) / 32))
- #define IRR_SHIFT(idx) ((idx * 4) % 32)
-
-@@ -65,19 +84,33 @@ static inline void write_irr(void __iome
- writel(irr, irr0 + offset);
- }
-
-+static inline void enable_gimr(int hwirq, int cpu)
-+{
-+ u32 value;
-+
-+ value = readl(REG(RTL_ICTL_GIMR, cpu));
-+ value |= (BIT(hwirq) & realtek_ictl_unmask[cpu]);
-+ writel(value, REG(RTL_ICTL_GIMR, cpu));
-+}
-+
-+static inline void disable_gimr(int hwirq, int cpu)
-+{
-+ u32 value;
-+
-+ value = readl(REG(RTL_ICTL_GIMR, cpu));
-+ value &= ~BIT(hwirq);
-+ writel(value, REG(RTL_ICTL_GIMR, cpu));
-+}
-+
- static void realtek_ictl_unmask_irq(struct irq_data *i)
- {
- unsigned long flags;
-- u32 value;
- int cpu;
-
- raw_spin_lock_irqsave(&irq_lock, flags);
-
-- for_each_cpu(cpu, &realtek_ictl_cpu_configurable) {
-- value = readl(REG(RTL_ICTL_GIMR, cpu));
-- value |= BIT(i->hwirq);
-- writel(value, REG(RTL_ICTL_GIMR, cpu));
-- }
-+ for_each_cpu(cpu, &realtek_ictl_cpu_configurable)
-+ enable_gimr(i->hwirq, cpu);
-
- raw_spin_unlock_irqrestore(&irq_lock, flags);
- }
-@@ -85,16 +118,12 @@ static void realtek_ictl_unmask_irq(stru
- static void realtek_ictl_mask_irq(struct irq_data *i)
- {
- unsigned long flags;
-- u32 value;
- int cpu;
-
- raw_spin_lock_irqsave(&irq_lock, flags);
-
-- for_each_cpu(cpu, &realtek_ictl_cpu_configurable) {
-- value = readl(REG(RTL_ICTL_GIMR, cpu));
-- value &= ~BIT(i->hwirq);
-- writel(value, REG(RTL_ICTL_GIMR, cpu));
-- }
-+ for_each_cpu(cpu, &realtek_ictl_cpu_configurable)
-+ disable_gimr(i->hwirq, cpu);
-
- raw_spin_unlock_irqrestore(&irq_lock, flags);
- }
-@@ -116,11 +145,17 @@ static int __maybe_unused realtek_ictl_i
- cpumask_and(&cpu_enable, &cpu_configure, dest);
- cpumask_andnot(&cpu_disable, &cpu_configure, dest);
-
-- for_each_cpu(cpu, &cpu_disable)
-+ for_each_cpu(cpu, &cpu_disable) {
- write_irr(REG(RTL_ICTL_IRR0, cpu), i->hwirq, 0);
-+ realtek_ictl_unmask[cpu] &= ~BIT(i->hwirq);
-+ disable_gimr(i->hwirq, cpu);
-+ }
-
-- for_each_cpu(cpu, &cpu_enable)
-+ for_each_cpu(cpu, &cpu_enable) {
- write_irr(REG(RTL_ICTL_IRR0, cpu), i->hwirq, output->output_index + 1);
-+ realtek_ictl_unmask[cpu] |= BIT(i->hwirq);
-+ enable_gimr(i->hwirq, cpu);
-+ }
-
- irq_data_update_effective_affinity(i, &cpu_enable);
-
-@@ -149,6 +184,7 @@ static int intc_map(struct irq_domain *d
-
- output->child_mask |= BIT(hw);
- write_irr(REG(RTL_ICTL_IRR0, 0), hw, output->output_index + 1);
-+ realtek_ictl_unmask[0] |= BIT(hw);
-
- raw_spin_unlock_irqrestore(&irq_lock, flags);
-
-@@ -285,9 +321,11 @@ static int __init realtek_rtl_of_init(st
- cpumask_set_cpu(cpu, &realtek_ictl_cpu_configurable);
-
- /* Disable all cascaded interrupts and clear routing */
-- writel(0, REG(RTL_ICTL_GIMR, cpu));
-- for (soc_irq = 0; soc_irq < RTL_ICTL_NUM_INPUTS; soc_irq++)
-+ for (soc_irq = 0; soc_irq < RTL_ICTL_NUM_INPUTS; soc_irq++) {
- write_irr(REG(RTL_ICTL_IRR0, cpu), soc_irq, 0);
-+ realtek_ictl_unmask[cpu] &= ~BIT(soc_irq);
-+ disable_gimr(soc_irq, cpu);
-+ }
- }
- }
-
More information about the lede-commits
mailing list