[openwrt/openwrt] bcm53xx: drop 6.1 support
LEDE Commits
lede-commits at lists.infradead.org
Mon Sep 9 05:30:03 PDT 2024
robimarko pushed a commit to openwrt/openwrt.git, branch main:
https://git.openwrt.org/5eb8b7793dfdf251f6bf75ae2b1124504844c339
commit 5eb8b7793dfdf251f6bf75ae2b1124504844c339
Author: Mieczyslaw Nalewaj <namiltd at yahoo.com>
AuthorDate: Wed Aug 7 16:59:12 2024 +0200
bcm53xx: drop 6.1 support
Drop config and files for Linux 6.1.
Signed-off-by: Mieczyslaw Nalewaj <namiltd at yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/16103
Signed-off-by: Robert Marko <robimarko at gmail.com>
---
target/linux/bcm53xx/config-6.1 | 339 ----
target/linux/bcm53xx/image/Makefile | 2 -
...53016-Add-devicetree-for-D-Link-DWL-8610A.patch | 165 --
...m47094-Add-devicetree-for-D-Link-DIR-890L.patch | 242 ---
...5301X-Correct-description-of-TP-Link-part.patch | 99 --
...oadcom-align-LED-node-names-with-dtschema.patch | 1700 --------------------
...5301X-Relicense-Rafa-s-code-to-the-GPL-2..patch | 487 ------
...5301X-Relicense-Florian-s-code-to-the-GPL.patch | 136 --
...5301X-Relicense-Hauke-s-code-to-the-GPL-2.patch | 249 ---
...5301X-Relicense-AXI-interrupts-code-to-th.patch | 203 ---
...5301X-Specify-MAC-addresses-on-Luxul-devi.patch | 336 ----
...5301X-Use-updated-device-compatible-strin.patch | 90 --
...5301X-Use-updated-spi-gpio-binding-proper.patch | 82 -
...9-ARM-dts-BCM5301X-Drop-invalid-usb-cells.patch | 54 -
...5301X-Drop-invalid-properties-from-Meraki.patch | 31 -
...5301X-Relicense-Christian-s-code-to-the-G.patch | 106 --
...5301X-Describe-switch-ports-in-the-main-D.patch | 838 ----------
...5301X-MR26-MR32-remove-bogus-nand-ecc-alg.patch | 63 -
...5301X-MR32-remove-partition-index-numbers.patch | 54 -
...5301X-Add-Netgear-R8000-WiFi-regulator-ma.patch | 61 -
...ts-BCM5301X-Add-cells-sizes-to-PCIe-nodes.patch | 59 -
...ARM-dts-broadcom-add-missing-space-before.patch | 37 -
...5301X-Add-Wi-Fi-regulatory-mappings-for-L.patch | 107 --
...ts-BCM5301X-Add-Ethernet-interfaces-links.patch | 53 -
...53573-Drop-nonexistent-default-off-LED-tr.patch | 57 -
...53573-Fix-Ethernet-info-for-Luxul-devices.patch | 75 -
...10-ARM-dts-bcm5301x-Add-SEAMA-compatibles.patch | 36 -
...53573-Describe-BCM53125-switch-ports-in-t.patch | 97 --
...M-dts-BCM53573-Add-BCM53125-switch-port-5.patch | 36 -
...ts-BCM53573-Add-Ethernet-interfaces-links.patch | 73 -
...53573-Disable-second-Ethernet-on-Luxul-de.patch | 39 -
...RM-dts-BCM5301X-Add-DT-for-Asus-RT-AC3100.patch | 431 -----
...dts-BCM5301X-Set-MACs-for-D-Link-DIR-885L.patch | 56 -
...CM5301X-Set-MAC-address-for-Asus-RT-AC87U.patch | 44 -
...5301X-Relicense-Felix-s-code-to-the-GPL-2.patch | 57 -
...5301X-Relicense-Vivek-s-code-to-the-GPL-2.patch | 104 --
...5301X-Explicitly-disable-unused-switch-CP.patch | 377 -----
...5301X-Set-fixed-link-for-extra-Netgear-R8.patch | 47 -
...5301X-Set-switch-ports-for-Linksys-EA9200.patch | 63 -
.../080-v6.2-bcma-support-SPROM-rev-11.patch | 28 -
...rs-trx-parse-firmware-MTD-partitions-only.patch | 43 -
...-add-support-for-performing-fake-doorbell.patch | 118 --
...X-Disable-MMU-and-Dcache-during-decompres.patch | 101 --
...5301X-Specify-switch-ports-for-remaining-.patch | 675 --------
...310-ARM-BCM5301X-Add-DT-for-Netgear-R7900.patch | 64 -
...t-EOF-mark-and-erase-all-remaining-blocks.patch | 59 -
.../600-net-disable-GRO-by-default.patch | 36 -
...e-max-frame-size-to-support-just-MTU-1500.patch | 33 -
.../patches-6.1/905-BCM53573-minor-hacks.patch | 80 -
49 files changed, 8422 deletions(-)
diff --git a/target/linux/bcm53xx/config-6.1 b/target/linux/bcm53xx/config-6.1
deleted file mode 100644
index 259c6559a6..0000000000
--- a/target/linux/bcm53xx/config-6.1
+++ /dev/null
@@ -1,339 +0,0 @@
-CONFIG_ALIGNMENT_TRAP=y
-CONFIG_ARCH_32BIT_OFF_T=y
-CONFIG_ARCH_BCM=y
-CONFIG_ARCH_BCM_5301X=y
-CONFIG_ARCH_BCM_53573=y
-CONFIG_ARCH_BCM_IPROC=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_KEEP_MEMBLOCK=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MULTIPLATFORM=y
-CONFIG_ARCH_MULTI_V6_V7=y
-CONFIG_ARCH_MULTI_V7=y
-CONFIG_ARCH_NR_GPIO=0
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARM=y
-CONFIG_ARM_AMBA=y
-CONFIG_ARM_APPENDED_DTB=y
-CONFIG_ARM_ARCH_TIMER=y
-CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
-# CONFIG_ARM_ATAG_DTB_COMPAT is not set
-CONFIG_ARM_ERRATA_754322=y
-CONFIG_ARM_ERRATA_764369=y
-CONFIG_ARM_ERRATA_775420=y
-CONFIG_ARM_GIC=y
-CONFIG_ARM_GLOBAL_TIMER=y
-CONFIG_ARM_GT_INITIAL_PRESCALER_VAL=1
-CONFIG_ARM_HAS_GROUP_RELOCS=y
-CONFIG_ARM_HEAVY_MB=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-CONFIG_ARM_L1_CACHE_SHIFT_6=y
-CONFIG_ARM_PATCH_IDIV=y
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-CONFIG_ARM_THUMB=y
-CONFIG_ARM_UNWIND=y
-CONFIG_ARM_VIRT_EXT=y
-CONFIG_ATAGS=y
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_B53=y
-CONFIG_B53_MDIO_DRIVER=y
-CONFIG_B53_SRAB_DRIVER=y
-CONFIG_BCM47XX_NVRAM=y
-CONFIG_BCM47XX_SPROM=y
-CONFIG_BCM47XX_WDT=y
-CONFIG_BCMA=y
-CONFIG_BCMA_BLOCKIO=y
-CONFIG_BCMA_DEBUG=y
-CONFIG_BCMA_DRIVER_GMAC_CMN=y
-CONFIG_BCMA_DRIVER_GPIO=y
-CONFIG_BCMA_DRIVER_PCI=y
-CONFIG_BCMA_FALLBACK_SPROM=y
-CONFIG_BCMA_HOST_PCI=y
-CONFIG_BCMA_HOST_PCI_POSSIBLE=y
-CONFIG_BCMA_HOST_SOC=y
-CONFIG_BCMA_SFLASH=y
-# CONFIG_BCM_CYGNUS_PHY is not set
-CONFIG_BCM_NET_PHYLIB=y
-CONFIG_BCM_NS_THERMAL=y
-CONFIG_BCM_SR_THERMAL=y
-CONFIG_BGMAC=y
-CONFIG_BGMAC_BCMA=y
-# CONFIG_BGMAC_PLATFORM is not set
-CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_BOUNCE=y
-CONFIG_BROADCOM_PHY=y
-CONFIG_CACHE_L2X0=y
-CONFIG_CC_HAVE_STACKPROTECTOR_TLS=y
-CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5"
-CONFIG_CC_NO_ARRAY_BOUNDS=y
-CONFIG_CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK=y
-CONFIG_CLKSRC_MMIO=y
-# CONFIG_CLK_BCM_NS2 is not set
-CONFIG_CLK_BCM_NSP=y
-# CONFIG_CLK_BCM_SR is not set
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_COMMON_CLK=y
-CONFIG_COMMON_CLK_IPROC=y
-CONFIG_COMPACT_UNEVICTABLE_DEFAULT=1
-CONFIG_COMPAT_32BIT_TIME=y
-CONFIG_CONTEXT_TRACKING=y
-CONFIG_CONTEXT_TRACKING_IDLE=y
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_RMAP=y
-CONFIG_CPU_SPECTRE=y
-CONFIG_CPU_THUMB_CAPABLE=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_V7=y
-CONFIG_CRC16=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_HASH_INFO=y
-CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
-CONFIG_CRYPTO_LIB_SHA1=y
-CONFIG_CRYPTO_LIB_UTILS=y
-CONFIG_CRYPTO_LZO=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_ZSTD=y
-CONFIG_CURRENT_POINTER_IN_TPIDRURO=y
-CONFIG_DCACHE_WORD_ACCESS=y
-CONFIG_DEBUG_BCM_5301X=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_LL=y
-CONFIG_DEBUG_LL_INCLUDE="debug/8250.S"
-CONFIG_DEBUG_MISC=y
-CONFIG_DEBUG_UART_8250=y
-CONFIG_DEBUG_UART_8250_SHIFT=0
-CONFIG_DEBUG_UART_PHYS=0x18000300
-CONFIG_DEBUG_UART_VIRT=0xf1000300
-CONFIG_DEBUG_USER=y
-CONFIG_DMA_OPS=y
-CONFIG_DTC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_EDAC_ATOMIC_SCRUB=y
-CONFIG_EDAC_SUPPORT=y
-CONFIG_EXCLUSIVE_SYSTEM_RAM=y
-CONFIG_EXTCON=y
-CONFIG_FIXED_PHY=y
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_FWNODE_MDIO=y
-CONFIG_FW_LOADER_PAGED_BUF=y
-CONFIG_FW_LOADER_SYSFS=y
-# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
-CONFIG_GCC11_NO_ARRAY_BOUNDS=y
-CONFIG_GCC_ASM_GOTO_OUTPUT_WORKAROUND=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_ARCH_TOPOLOGY=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_CPU_VULNERABILITIES=y
-CONFIG_GENERIC_EARLY_IOREMAP=y
-CONFIG_GENERIC_GETTIMEOFDAY=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PHY=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_PINCTRL_GROUPS=y
-CONFIG_GENERIC_PINMUX_FUNCTIONS=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_VDSO_32=y
-CONFIG_GPIOLIB_IRQCHIP=y
-CONFIG_GPIO_74X164=y
-CONFIG_GPIO_BCM_XGS_IPROC=y
-CONFIG_GPIO_CDEV=y
-CONFIG_GPIO_GENERIC=y
-CONFIG_GRO_CELLS=y
-CONFIG_HARDEN_BRANCH_PREDICTOR=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HAVE_SMP=y
-CONFIG_HIGHMEM=y
-CONFIG_HIGHPTE=y
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_BCM2835=y
-CONFIG_HZ_FIXED=0
-CONFIG_HZ_PERIODIC=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQCHIP=y
-CONFIG_IRQSTACKS=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_DOMAIN_HIERARCHY=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-CONFIG_KMAP_LOCAL=y
-CONFIG_KMAP_LOCAL_NON_LINEAR_PTE_ARRAY=y
-# CONFIG_LEDS_BCM63138 is not set
-CONFIG_LIBFDT=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_LOCK_SPIN_ON_OWNER=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_MDIO_BCM_IPROC=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_BUS_MUX=y
-# CONFIG_MDIO_BUS_MUX_BCM_IPROC is not set
-CONFIG_MDIO_BUS_MUX_MMIOREG=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MDIO_DEVRES=y
-CONFIG_MEMFD_CREATE=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MIGHT_HAVE_CACHE_L2X0=y
-CONFIG_MIGRATION=y
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MTD_BCM47XXSFLASH=y
-CONFIG_MTD_BCM47XX_PARTS=y
-CONFIG_MTD_NAND_BRCMNAND=y
-CONFIG_MTD_NAND_BRCMNAND_IPROC=y
-CONFIG_MTD_NAND_CORE=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_NAND_ECC_SW_HAMMING=y
-CONFIG_MTD_OF_PARTS_LINKSYS_NS=y
-CONFIG_MTD_PARSER_TPLINK_SAFELOADER=y
-CONFIG_MTD_PARSER_TRX=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_SPLIT_SEAMA_FW=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_BEB_LIMIT=20
-CONFIG_MTD_UBI_BLOCK=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NET_DEVLINK=y
-CONFIG_NET_DSA=y
-CONFIG_NET_DSA_TAG_BRCM=y
-CONFIG_NET_DSA_TAG_BRCM_COMMON=y
-CONFIG_NET_DSA_TAG_BRCM_LEGACY=y
-CONFIG_NET_DSA_TAG_BRCM_PREPEND=y
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NET_SELFTESTS=y
-CONFIG_NET_SWITCHDEV=y
-CONFIG_NR_CPUS=2
-CONFIG_NVMEM=y
-CONFIG_NVMEM_BRCM_NVRAM=y
-CONFIG_NVMEM_LAYOUTS=y
-CONFIG_NVMEM_SYSFS=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND3=y
-CONFIG_OUTER_CACHE=y
-CONFIG_OUTER_CACHE_SYNC=y
-CONFIG_PADATA=y
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PAGE_POOL=y
-CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
-CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
-CONFIG_PCI=y
-CONFIG_PCIE_IPROC=y
-CONFIG_PCIE_IPROC_BCMA=y
-# CONFIG_PCIE_IPROC_PLATFORM is not set
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DOMAINS_GENERIC=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-CONFIG_PHYLIB_LEDS=y
-CONFIG_PHYLINK=y
-# CONFIG_PHY_BCM_NS_USB2 is not set
-# CONFIG_PHY_BCM_NS_USB3 is not set
-# CONFIG_PHY_BCM_SR_PCIE is not set
-CONFIG_PHY_BCM_SR_USB=y
-# CONFIG_PHY_BRCM_SATA is not set
-# CONFIG_PHY_NS2_USB_DRD is not set
-CONFIG_PINCTRL=y
-# CONFIG_PINCTRL_IPROC_GPIO is not set
-CONFIG_PINCTRL_NS=y
-# CONFIG_PINCTRL_NS2_MUX is not set
-CONFIG_PREEMPT_NONE_BUILD=y
-CONFIG_PTP_1588_CLOCK_OPTIONAL=y
-CONFIG_PWM=y
-CONFIG_PWM_BCM_IPROC=y
-CONFIG_PWM_SYSFS=y
-CONFIG_RANDSTRUCT_NONE=y
-CONFIG_RATIONAL=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_RFS_ACCEL=y
-CONFIG_RPS=y
-CONFIG_RWSEM_SPIN_ON_OWNER=y
-CONFIG_SERIAL_8250_FSL=y
-CONFIG_SERIAL_MCTRL_GPIO=y
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SGL_ALLOC=y
-CONFIG_SMP=y
-CONFIG_SMP_ON_UP=y
-CONFIG_SOCK_RX_QUEUE_MAPPING=y
-CONFIG_SOFTIRQ_ON_OWN_STACK=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPI=y
-CONFIG_SPI_BCM_QSPI=y
-CONFIG_SPI_BITBANG=y
-CONFIG_SPI_GPIO=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_MEM=y
-CONFIG_SRCU=y
-CONFIG_SWPHY=y
-CONFIG_SWP_EMULATE=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_THERMAL=y
-CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
-CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
-CONFIG_THERMAL_GOV_STEP_WISE=y
-CONFIG_THERMAL_OF=y
-CONFIG_THREAD_INFO_IN_TASK=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_OF=y
-CONFIG_TIMER_PROBE=y
-CONFIG_TREE_RCU=y
-CONFIG_TREE_SRCU=y
-CONFIG_UBIFS_FS=y
-CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
-CONFIG_UNWINDER_ARM=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USE_OF=y
-# CONFIG_VFP is not set
-CONFIG_WATCHDOG_CORE=y
-CONFIG_XPS=y
-CONFIG_XXHASH=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZSTD_COMMON=y
-CONFIG_ZSTD_COMPRESS=y
-CONFIG_ZSTD_DECOMPRESS=y
diff --git a/target/linux/bcm53xx/image/Makefile b/target/linux/bcm53xx/image/Makefile
index f74fa6cbde..e02eba387c 100644
--- a/target/linux/bcm53xx/image/Makefile
+++ b/target/linux/bcm53xx/image/Makefile
@@ -127,9 +127,7 @@ define Build/dwl8610ap-image
mv $@.new $@
endef
-ifneq ($(KERNEL),6.1)
DTS_DIR := $(DTS_DIR)/broadcom
-endif
DEVICE_VARS += ASUS_PRODUCTID
DEVICE_VARS += BUFFALO_TAG_PLATFORM BUFFALO_TAG_VERSION BUFFALO_TAG_MINOR
diff --git a/target/linux/bcm53xx/patches-6.1/030-v6.2-0001-ARM-dts-bcm53016-Add-devicetree-for-D-Link-DWL-8610A.patch b/target/linux/bcm53xx/patches-6.1/030-v6.2-0001-ARM-dts-bcm53016-Add-devicetree-for-D-Link-DWL-8610A.patch
deleted file mode 100644
index 0439e38991..0000000000
--- a/target/linux/bcm53xx/patches-6.1/030-v6.2-0001-ARM-dts-bcm53016-Add-devicetree-for-D-Link-DWL-8610A.patch
+++ /dev/null
@@ -1,165 +0,0 @@
-From 9f66e1dd82e3186aee95282657512ca2aef1afe0 Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij at linaro.org>
-Date: Wed, 19 Oct 2022 21:34:49 +0200
-Subject: [PATCH] ARM: dts: bcm53016: Add devicetree for D-Link DWL-8610AP
-
-This adds a device tree for the BCM53016-based D-Link DWL-8610AP
-access point wireless router.
-
-The TRX-format partitions had to be named "firmware" due to
-an OpenWrt patch that only accepts parting such nodes if they
-are named "firmware".
-
-Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
-Link: https://lore.kernel.org/r/20221019193449.3036010-2-linus.walleij@linaro.org
-Signed-off-by: Florian Fainelli <f.fainelli at gmail.com>
----
- arch/arm/boot/dts/Makefile | 1 +
- .../boot/dts/bcm53016-dlink-dwl-8610ap.dts | 131 ++++++++++++++++++
- 2 files changed, 132 insertions(+)
- create mode 100644 arch/arm/boot/dts/bcm53016-dlink-dwl-8610ap.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -139,6 +139,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- bcm47094-netgear-r8500.dtb \
- bcm47094-phicomm-k3.dtb \
- bcm53015-meraki-mr26.dtb \
-+ bcm53016-dlink-dwl-8610ap.dtb \
- bcm53016-meraki-mr32.dtb \
- bcm94708.dtb \
- bcm94709.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm53016-dlink-dwl-8610ap.dts
-@@ -0,0 +1,131 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-+/dts-v1/;
-+
-+#include "bcm4709.dtsi"
-+#include "bcm5301x-nand-cs0-bch8.dtsi"
-+#include <dt-bindings/leds/common.h>
-+#include <dt-bindings/input/input.h>
-+
-+/ {
-+ model = "D-Link DWL-8610AP";
-+ compatible = "dlink,dwl-8610ap", "brcm,bcm53016", "brcm,bcm4708";
-+
-+ memory at 0 {
-+ device_type = "memory";
-+ /* 512 MB RAM in 2 x Macronix D9PSH chips */
-+ reg = <0x00000000 0x08000000>,
-+ <0x88000000 0x08000000>;
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ power {
-+ function = LED_FUNCTION_POWER;
-+ color = <LED_COLOR_ID_GREEN>;
-+ gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
-+ default-state = "on";
-+ };
-+
-+ diag {
-+ /* Actually "diag" unclear what this means */
-+ function = LED_FUNCTION_INDICATOR;
-+ color = <LED_COLOR_ID_RED>;
-+ gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
-+ default-state = "on";
-+ linux,default-trigger = "heartbeat";
-+ };
-+
-+ wlan-2g {
-+ function = LED_FUNCTION_WLAN;
-+ color = <LED_COLOR_ID_GREEN>;
-+ gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ wlan-5g {
-+ function = LED_FUNCTION_WLAN;
-+ color = <LED_COLOR_ID_GREEN>;
-+ gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+
-+ gpio_keys {
-+ compatible = "gpio-keys";
-+
-+ button-reset {
-+ debounce-interval = <100>;
-+ wakeup-source;
-+ linux,code = <KEY_RESTART>;
-+ label = "reset";
-+ /* This GPIO is actually stored in NVRAM, but it's not gonna change */
-+ gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+
-+ /*
-+ * Flash memory at 0x1e000000-0x1fffffff
-+ * Macronix 32 64KB blocks; total size 2MB, same that can be
-+ * found attached to the spi_nor SPI controller.
-+ */
-+ nvram at 1e080000 {
-+ compatible = "brcm,nvram";
-+ reg = <0x1e080000 0x00020000>;
-+
-+ et0macaddr: et0macaddr {
-+ };
-+
-+ et1macaddr: et1macaddr {
-+ };
-+ };
-+};
-+
-+&gmac0 {
-+ nvmem-cells = <&et0macaddr>;
-+ nvmem-cell-names = "mac-address";
-+};
-+
-+&gmac1 {
-+ nvmem-cells = <&et1macaddr>;
-+ nvmem-cell-names = "mac-address";
-+};
-+
-+&spi_nor {
-+ /* Serial SPI NOR Flash MX 25L1606E */
-+ status = "okay";
-+};
-+
-+&nandcs {
-+ /*
-+ * Spansion S34ML01G100TFI00 128 MB NAND Flash memory
-+ *
-+ * This ECC is a bit unorthodox but it is what the stock firmware
-+ * is using, so to be able to mount the original partitions
-+ * this is necessary.
-+ */
-+ nand-ecc-strength = <5>;
-+ partitions {
-+ compatible = "fixed-partitions";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ /* This is named nflash1.trx in CFE */
-+ trx at 0 {
-+ label = "firmware";
-+ reg = <0x00000000 0x02800000>;
-+ compatible = "brcm,trx";
-+ };
-+
-+ /* This is named nflash1.trx2 in CFE */
-+ trx2 at 2800000 {
-+ label = "firmware2";
-+ reg = <0x02800000 0x02800000>;
-+ compatible = "brcm,trx";
-+ };
-+
-+ /* This is named nflash1.rwfs in CFE */
-+ free at 5000000 {
-+ label = "free";
-+ reg = <0x05000000 0x03000000>;
-+ };
-+ };
-+};
diff --git a/target/linux/bcm53xx/patches-6.1/030-v6.2-0002-ARM-dts-bcm47094-Add-devicetree-for-D-Link-DIR-890L.patch b/target/linux/bcm53xx/patches-6.1/030-v6.2-0002-ARM-dts-bcm47094-Add-devicetree-for-D-Link-DIR-890L.patch
deleted file mode 100644
index 21bb94fcc3..0000000000
--- a/target/linux/bcm53xx/patches-6.1/030-v6.2-0002-ARM-dts-bcm47094-Add-devicetree-for-D-Link-DIR-890L.patch
+++ /dev/null
@@ -1,242 +0,0 @@
-From b1ba87897ceda8e49a47aa92832dd7bff8583e21 Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij at linaro.org>
-Date: Mon, 7 Nov 2022 14:41:04 +0100
-Subject: [PATCH] ARM: dts: bcm47094: Add devicetree for D-Link DIR-890L
-
-This adds a device tree for the D-Link DIR-890L. This device
-is very similar to D-Link DIR-885L, the differences are detailed
-as a comment in the DTS file.
-
-Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
-Link: https://lore.kernel.org/r/20221107134104.1422169-2-linus.walleij@linaro.org
-Signed-off-by: Florian Fainelli <f.fainelli at gmail.com>
----
- arch/arm/boot/dts/Makefile | 1 +
- arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts | 211 ++++++++++++++++++
- 2 files changed, 212 insertions(+)
- create mode 100644 arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -129,6 +129,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- bcm4709-tplink-archer-c9-v1.dtb \
- bcm47094-asus-rt-ac88u.dtb \
- bcm47094-dlink-dir-885l.dtb \
-+ bcm47094-dlink-dir-890l.dtb \
- bcm47094-linksys-panamera.dtb \
- bcm47094-luxul-abr-4500.dtb \
- bcm47094-luxul-xap-1610.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts
-@@ -0,0 +1,211 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-+/*
-+ * Device tree for D-Link DIR-890L
-+ * D-Link calls this board "WRGAC36"
-+ * this router has the same looks and form factor as D-Link DIR-885L.
-+ *
-+ * Some differences from DIR-885L include a separate USB2 port, separate LEDs
-+ * for USB2 and USB3, a separate VCC supply for the USB2 slot and no
-+ * router/extender switch is mounted (there is an empty mount point on the
-+ * PCB) so this device is a pure router. Also the LAN ports are in the right
-+ * order.
-+ *
-+ * Based on the device tree for DIR-885L
-+ * Copyright (C) 2016 Rafał Miłecki <zajec5 at gmail.com>
-+ * Copyright (C) 2022 Linus Walleij
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm47094.dtsi"
-+#include "bcm5301x-nand-cs0-bch1.dtsi"
-+
-+/ {
-+ compatible = "dlink,dir-890l", "brcm,bcm47094", "brcm,bcm4708";
-+ model = "D-Link DIR-890L";
-+
-+ chosen {
-+ bootargs = "console=ttyS0,115200 earlycon";
-+ };
-+
-+ memory at 0 {
-+ device_type = "memory";
-+ reg = <0x00000000 0x08000000>,
-+ <0x88000000 0x08000000>;
-+ };
-+
-+ leds {
-+ /*
-+ * LED information is derived from the boot log which
-+ * conveniently lists all the LEDs.
-+ */
-+ compatible = "gpio-leds";
-+
-+ power-white {
-+ label = "bcm53xx:white:power";
-+ gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-on";
-+ };
-+
-+ wan-white {
-+ label = "bcm53xx:white:wan";
-+ gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ power-amber {
-+ label = "bcm53xx:amber:power";
-+ gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ wan-amber {
-+ label = "bcm53xx:amber:wan";
-+ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ usb3-white {
-+ label = "bcm53xx:white:usb3";
-+ gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
-+ trigger-sources = <&xhci_port1>;
-+ linux,default-trigger = "usbport";
-+ };
-+
-+ usb2-white {
-+ label = "bcm53xx:white:usb2";
-+ gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
-+ trigger-sources = <&ohci_port1>, <&ehci_port1>;
-+ linux,default-trigger = "usbport";
-+ };
-+
-+ 2ghz {
-+ label = "bcm53xx:white:2ghz";
-+ gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ 5ghz {
-+ label = "bcm53xx:white:5ghz";
-+ gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+
-+ gpio-keys {
-+ compatible = "gpio-keys";
-+
-+ button-wps {
-+ label = "WPS";
-+ linux,code = <KEY_WPS_BUTTON>;
-+ gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ /* Called "factory reset" in the vendor dmesg */
-+ button-restart {
-+ label = "Reset";
-+ linux,code = <KEY_RESTART>;
-+ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+
-+ /*
-+ * The flash memory is memory mapped at 0x1e000000-0x1fffffff
-+ * 64KB blocks; total size 2MB, same that can be
-+ * found attached to the spi_nor SPI controller.
-+ */
-+ nvram at 1e1f0000 {
-+ compatible = "brcm,nvram";
-+ reg = <0x1e1f0000 0x00010000>;
-+
-+ et0macaddr: et0macaddr {
-+ };
-+ };
-+};
-+
-+&gmac2 {
-+ /*
-+ * The NVRAM curiously does not contain a MAC address
-+ * for et2 so since that is the only ethernet interface
-+ * actually in use on the platform, we use this et0 MAC
-+ * address for et2.
-+ */
-+ nvmem-cells = <&et0macaddr>;
-+ nvmem-cell-names = "mac-address";
-+};
-+
-+&spi_nor {
-+ status = "okay";
-+};
-+
-+&nandcs {
-+ /* Spansion S34ML01G2, 128MB with 128KB erase blocks */
-+ partitions {
-+ compatible = "fixed-partitions";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ /*
-+ * This is called "nflash" in the vendor kernel with
-+ * "upgrade" and "rootfs" (probably using OpenWrt
-+ * splitpart). We call it "firmware" like standard tools
-+ * assume. The CFE loader contains incorrect information
-+ * about TRX partitions, ignore this, there are no TRX
-+ * partitions: this device uses SEAMA.
-+ */
-+ firmware at 0 {
-+ label = "firmware";
-+ reg = <0x00000000 0x08000000>;
-+ };
-+ };
-+};
-+
-+&usb2 {
-+ vcc-gpios = <&chipcommon 21 GPIO_ACTIVE_HIGH>;
-+};
-+
-+&usb3 {
-+ vcc-gpios = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
-+};
-+
-+&usb3_phy {
-+ status = "okay";
-+};
-+
-+&srab {
-+ status = "okay";
-+
-+ ports {
-+ port at 0 {
-+ reg = <0>;
-+ label = "lan1";
-+ };
-+
-+ port at 1 {
-+ reg = <1>;
-+ label = "lan2";
-+ };
-+
-+ port at 2 {
-+ reg = <2>;
-+ label = "lan3";
-+ };
-+
-+ port at 3 {
-+ reg = <3>;
-+ label = "lan4";
-+ };
-+
-+ port at 4 {
-+ reg = <4>;
-+ label = "wan";
-+ };
-+
-+ port at 8 {
-+ reg = <8>;
-+ label = "cpu";
-+ ethernet = <&gmac2>;
-+ phy-mode = "rgmii";
-+
-+ fixed-link {
-+ speed = <1000>;
-+ full-duplex;
-+ };
-+ };
-+ };
-+};
diff --git a/target/linux/bcm53xx/patches-6.1/030-v6.2-0003-ARM-dts-BCM5301X-Correct-description-of-TP-Link-part.patch b/target/linux/bcm53xx/patches-6.1/030-v6.2-0003-ARM-dts-BCM5301X-Correct-description-of-TP-Link-part.patch
deleted file mode 100644
index 4c4ed036b9..0000000000
--- a/target/linux/bcm53xx/patches-6.1/030-v6.2-0003-ARM-dts-BCM5301X-Correct-description-of-TP-Link-part.patch
+++ /dev/null
@@ -1,99 +0,0 @@
-From c8ee9f119bfb4244f76c9971c341ec06b49332cd Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal at milecki.pl>
-Date: Tue, 8 Nov 2022 12:07:08 +0100
-Subject: [PATCH] ARM: dts: BCM5301X: Correct description of TP-Link partitions
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-TP-Link routers have flash space partitioned according to the partitions
-table. It may look like fixed partitioning but those partitions can be
-actually reorganized. New can be added (or some removed), offsets and
-sizes may change.
-
-Fix DT to use binding for the TP-Link SafeLoader partitioning method.
-
-Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
-Link: https://lore.kernel.org/r/20221108110708.13693-1-zajec5@gmail.com
-Signed-off-by: Florian Fainelli <f.fainelli at gmail.com>
----
- .../boot/dts/bcm47081-tplink-archer-c5-v2.dts | 25 ++++---------------
- .../boot/dts/bcm4709-tplink-archer-c9-v1.dts | 25 ++++---------------
- 2 files changed, 10 insertions(+), 40 deletions(-)
-
---- a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
-+++ b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
-@@ -95,30 +95,15 @@
- status = "okay";
-
- partitions {
-- compatible = "fixed-partitions";
-- #address-cells = <1>;
-- #size-cells = <1>;
-+ compatible = "tplink,safeloader-partitions";
-+ partitions-table-offset = <0xe50000>;
-
-- boot at 0 {
-- label = "boot";
-- reg = <0x000000 0x040000>;
-- read-only;
-- };
--
-- os-image at 100000 {
-- label = "os-image";
-- reg = <0x040000 0x200000>;
-+ partition-os-image {
- compatible = "brcm,trx";
- };
-
-- rootfs at 240000 {
-- label = "rootfs";
-- reg = <0x240000 0xc00000>;
-- };
--
-- nvram at ff0000 {
-- label = "nvram";
-- reg = <0xff0000 0x010000>;
-+ partition-file-system {
-+ linux,rootfs;
- };
- };
- };
---- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
-+++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
-@@ -104,30 +104,15 @@
- status = "okay";
-
- partitions {
-- compatible = "fixed-partitions";
-- #address-cells = <1>;
-- #size-cells = <1>;
-+ compatible = "tplink,safeloader-partitions";
-+ partitions-table-offset = <0xe50000>;
-
-- boot at 0 {
-- label = "boot";
-- reg = <0x000000 0x040000>;
-- read-only;
-- };
--
-- os-image at 100000 {
-- label = "os-image";
-- reg = <0x040000 0x200000>;
-+ partition-os-image {
- compatible = "brcm,trx";
- };
-
-- rootfs at 240000 {
-- label = "rootfs";
-- reg = <0x240000 0xc00000>;
-- };
--
-- nvram at ff0000 {
-- label = "nvram";
-- reg = <0xff0000 0x010000>;
-+ partition-file-system {
-+ linux,rootfs;
- };
- };
- };
diff --git a/target/linux/bcm53xx/patches-6.1/030-v6.2-0004-ARM-dts-broadcom-align-LED-node-names-with-dtschema.patch b/target/linux/bcm53xx/patches-6.1/030-v6.2-0004-ARM-dts-broadcom-align-LED-node-names-with-dtschema.patch
deleted file mode 100644
index d6bf49d0cd..0000000000
--- a/target/linux/bcm53xx/patches-6.1/030-v6.2-0004-ARM-dts-broadcom-align-LED-node-names-with-dtschema.patch
+++ /dev/null
@@ -1,1700 +0,0 @@
-From af84101e3f2258a303fa2461ebec0878ce23ea10 Mon Sep 17 00:00:00 2001
-From: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
-Date: Fri, 25 Nov 2022 15:41:27 +0100
-Subject: [PATCH] ARM: dts: broadcom: align LED node names with dtschema
-
-The node names should be generic and DT schema expects certain pattern:
-
- bcm4708-asus-rt-ac68u.dtb: leds: 'logo', 'power', 'usb2', 'usb3' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
-
-Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
-Link: https://lore.kernel.org/r/20221125144128.477059-1-krzysztof.kozlowski@linaro.org
-Signed-off-by: Florian Fainelli <f.fainelli at gmail.com>
----
- arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts | 15 +++++-----
- arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts | 8 +++---
- .../bcm4708-buffalo-wzr-1166dhp-common.dtsi | 16 +++++------
- .../boot/dts/bcm4708-buffalo-wzr-1750dhp.dts | 16 +++++------
- arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts | 6 ++--
- arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts | 2 +-
- arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 10 +++----
- .../arm/boot/dts/bcm4708-netgear-r6300-v2.dts | 10 +++----
- arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts | 22 +++++++--------
- arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts | 10 +++----
- .../boot/dts/bcm47081-buffalo-wzr-600dhp2.dts | 14 +++++-----
- .../boot/dts/bcm47081-buffalo-wzr-900dhp.dts | 16 +++++------
- arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts | 6 ++--
- arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts | 20 ++++++-------
- .../boot/dts/bcm47081-tplink-archer-c5-v2.dts | 18 ++++++------
- arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts | 6 ++--
- .../boot/dts/bcm4709-buffalo-wxr-1900dhp.dts | 18 ++++++------
- arch/arm/boot/dts/bcm4709-netgear-r7000.dts | 16 +++++------
- arch/arm/boot/dts/bcm4709-netgear-r8000.dts | 22 +++++++--------
- .../boot/dts/bcm4709-tplink-archer-c9-v1.dts | 18 ++++++------
- arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts | 12 ++++----
- arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 14 +++++-----
- arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts | 16 +++++------
- .../boot/dts/bcm47094-linksys-panamera.dts | 28 +++++++++----------
- arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts | 4 +--
- arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts | 6 ++--
- arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts | 4 +--
- arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts | 2 +-
- arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts | 20 ++++++-------
- .../boot/dts/bcm47094-luxul-xwr-3150-v1.dts | 10 +++----
- arch/arm/boot/dts/bcm47094-netgear-r8500.dts | 14 +++++-----
- arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts | 4 +--
- arch/arm/boot/dts/bcm47189-luxul-xap-810.dts | 10 +++----
- arch/arm/boot/dts/bcm47189-tenda-ac9.dts | 14 +++++-----
- .../boot/dts/bcm53016-dlink-dwl-8610ap.dts | 8 +++---
- arch/arm/boot/dts/bcm53016-meraki-mr32.dts | 6 ++--
- arch/arm/boot/dts/bcm947189acdbmr.dts | 6 ++--
- 37 files changed, 223 insertions(+), 224 deletions(-)
-
---- a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
-+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
-@@ -28,40 +28,39 @@
- leds {
- compatible = "gpio-leds";
-
-- usb3 {
-+ led-usb3 {
- label = "bcm53xx:blue:usb3";
- gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
- };
-
-- wan {
-+ led-wan {
- label = "bcm53xx:blue:wan";
- gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
- };
-
-- lan {
-+ led-lan {
- label = "bcm53xx:blue:lan";
- gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
- };
-
-- power {
-+ led-power {
- label = "bcm53xx:blue:power";
- gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-on";
- };
-
-- all {
-+ led-all {
- label = "bcm53xx:blue:all";
- gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-on";
- };
-
-- 2ghz {
-+ led-2ghz {
- label = "bcm53xx:blue:2ghz";
- gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
- };
-
--
-- usb2 {
-+ led-usb2 {
- label = "bcm53xx:blue:usb2";
- gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
- };
---- a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
-+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
-@@ -28,24 +28,24 @@
- leds {
- compatible = "gpio-leds";
-
-- usb2 {
-+ led-usb2 {
- label = "bcm53xx:blue:usb2";
- gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
- };
-
-- power {
-+ led-power {
- label = "bcm53xx:blue:power";
- gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-on";
- };
-
-- logo {
-+ led-logo {
- label = "bcm53xx:white:logo";
- gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-on";
- };
-
-- usb3 {
-+ led-usb3 {
- label = "bcm53xx:blue:usb3";
- gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
- };
---- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi
-+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi
-@@ -37,7 +37,7 @@
- leds {
- compatible = "gpio-leds";
-
-- usb {
-+ led-usb {
- /* label = "bcm53xx:blue:usb"; */
- function = LED_FUNCTION_USB;
- color = <LED_COLOR_ID_BLUE>;
-@@ -48,14 +48,14 @@
- linux,default-trigger = "usbport";
- };
-
-- power0 {
-+ led-power0 {
- /* label = "bcm53xx:red:power"; */
- function = LED_FUNCTION_FAULT;
- color = <LED_COLOR_ID_RED>;
- gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
- };
-
-- power1 {
-+ led-power1 {
- /* label = "bcm53xx:white:power"; */
- function = LED_FUNCTION_POWER;
- color = <LED_COLOR_ID_WHITE>;
-@@ -63,7 +63,7 @@
- linux,default-trigger = "default-on";
- };
-
-- router0 {
-+ led-router0 {
- /* label = "bcm53xx:blue:router"; */
- function = LED_FUNCTION_STATUS;
- color = <LED_COLOR_ID_BLUE>;
-@@ -71,14 +71,14 @@
- linux,default-trigger = "default-on";
- };
-
-- router1 {
-+ led-router1 {
- /* label = "bcm53xx:amber:router"; */
- function = LED_FUNCTION_STATUS;
- color = <LED_COLOR_ID_AMBER>;
- gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
- };
-
-- wan {
-+ led-wan {
- /* label = "bcm53xx:blue:wan"; */
- function = LED_FUNCTION_WAN;
- color = <LED_COLOR_ID_BLUE>;
-@@ -86,14 +86,14 @@
- linux,default-trigger = "default-on";
- };
-
-- wireless0 {
-+ led-wireless0 {
- /* label = "bcm53xx:blue:wireless"; */
- function = LED_FUNCTION_WLAN;
- color = <LED_COLOR_ID_BLUE>;
- gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
- };
-
-- wireless1 {
-+ led-wireless1 {
- /* label = "bcm53xx:amber:wireless"; */
- function = LED_FUNCTION_WLAN;
- color = <LED_COLOR_ID_AMBER>;
---- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-@@ -49,7 +49,7 @@
- leds {
- compatible = "gpio-leds";
-
-- usb {
-+ led-usb {
- label = "bcm53xx:blue:usb";
- gpios = <&hc595 0 GPIO_ACTIVE_HIGH>;
- trigger-sources = <&ohci_port1>, <&ehci_port1>,
-@@ -58,40 +58,40 @@
- linux,default-trigger = "usbport";
- };
-
-- power0 {
-+ led-power0 {
- label = "bcm53xx:red:power";
- gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
- };
-
-- power1 {
-+ led-power1 {
- label = "bcm53xx:white:power";
- gpios = <&hc595 2 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-on";
- };
-
-- router0 {
-+ led-router0 {
- label = "bcm53xx:blue:router";
- gpios = <&hc595 3 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-on";
- };
-
-- router1 {
-+ led-router1 {
- label = "bcm53xx:amber:router";
- gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
- };
-
-- wan {
-+ led-wan {
- label = "bcm53xx:blue:wan";
- gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-on";
- };
-
-- wireless0 {
-+ led-wireless0 {
- label = "bcm53xx:blue:wireless";
- gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
- };
-
-- wireless1 {
-+ led-wireless1 {
- label = "bcm53xx:amber:wireless";
- gpios = <&hc595 7 GPIO_ACTIVE_HIGH>;
- };
---- a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
-+++ b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
-@@ -23,19 +23,19 @@
- leds {
- compatible = "gpio-leds";
-
-- 5ghz {
-+ led-5ghz {
- label = "bcm53xx:blue:5ghz";
- gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "none";
- };
-
-- 2ghz {
-+ led-2ghz {
- label = "bcm53xx:blue:2ghz";
- gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "none";
- };
-
-- status {
-+ led-status {
- label = "bcm53xx:green:status";
- gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "timer";
---- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
-+++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
-@@ -42,7 +42,7 @@
- leds {
- compatible = "gpio-leds";
-
-- status {
-+ led-status {
- label = "bcm53xx:green:status";
- gpios = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "timer";
---- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-@@ -29,24 +29,24 @@
- leds {
- compatible = "gpio-leds";
-
-- logo {
-+ led-logo {
- label = "bcm53xx:white:logo";
- gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-on";
- };
-
-- power0 {
-+ led-power0 {
- label = "bcm53xx:green:power";
- gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-on";
- };
-
-- power1 {
-+ led-power1 {
- label = "bcm53xx:amber:power";
- gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
- };
-
-- usb {
-+ led-usb {
- label = "bcm53xx:blue:usb";
- gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
- trigger-sources = <&ohci_port1>, <&ehci_port1>,
-@@ -54,7 +54,7 @@
- linux,default-trigger = "usbport";
- };
-
-- wireless {
-+ led-wireless {
- label = "bcm53xx:blue:wireless";
- gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
- };
---- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
-+++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
-@@ -28,29 +28,29 @@
- leds {
- compatible = "gpio-leds";
-
-- logo {
-+ led-logo {
- label = "bcm53xx:white:logo";
- gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-on";
- };
-
-- power0 {
-+ led-power0 {
- label = "bcm53xx:green:power";
- gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
- };
-
-- power1 {
-+ led-power1 {
- label = "bcm53xx:amber:power";
- gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-on";
- };
-
-- usb {
-+ led-usb {
- label = "bcm53xx:blue:usb";
- gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
- };
-
-- wireless {
-+ led-wireless {
- label = "bcm53xx:blue:wireless";
- gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
- };
---- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
-+++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
-@@ -28,64 +28,64 @@
- leds {
- compatible = "gpio-leds";
-
-- power-white {
-+ led-power-white {
- label = "bcm53xx:white:power";
- gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-on";
- };
-
-- power-amber {
-+ led-power-amber {
- label = "bcm53xx:amber:power";
- gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>;
- };
-
-- usb2 {
-+ led-usb2 {
- label = "bcm53xx:white:usb2";
- gpios = <&chipcommon 3 GPIO_ACTIVE_HIGH>;
- trigger-sources = <&ohci_port2>, <&ehci_port2>;
- linux,default-trigger = "usbport";
- };
-
-- usb3-white {
-+ led-usb3-white {
- label = "bcm53xx:white:usb3";
- gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
- trigger-sources = <&xhci_port1>;
- linux,default-trigger = "usbport";
- };
-
-- usb3-green {
-+ led-usb3-green {
- label = "bcm53xx:green:usb3";
- gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
- trigger-sources = <&ohci_port1>, <&ehci_port1>;
- linux,default-trigger = "usbport";
- };
-
-- wps {
-+ led-wps {
- label = "bcm53xx:white:wps";
- gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
- };
-
-- status-red {
-+ led-status-red {
- label = "bcm53xx:red:status";
- gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
- };
-
-- status-green {
-+ led-status-green {
- label = "bcm53xx:green:status";
- gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
- };
-
-- status-blue {
-+ led-status-blue {
- label = "bcm53xx:blue:status";
- gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
- };
-
-- wan-white {
-+ led-wan-white {
- label = "bcm53xx:white:wan";
- gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
- };
-
-- wan-red {
-+ led-wan-red {
- label = "bcm53xx:red:wan";
- gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
- };
---- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
-+++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
-@@ -28,30 +28,30 @@
- leds {
- compatible = "gpio-leds";
-
-- power {
-+ led-power {
- label = "bcm53xx:blue:power";
- gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-on";
- };
-
-- usb2 {
-+ led-usb2 {
- label = "bcm53xx:blue:usb2";
- gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
- };
-
-- wan {
-+ led-wan {
- label = "bcm53xx:blue:wan";
- gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-on";
- };
-
-- lan {
-+ led-lan {
- label = "bcm53xx:blue:lan";
- gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-on";
- };
-
-- usb3 {
-+ led-usb3 {
- label = "bcm53xx:blue:usb3";
- gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
- };
---- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
-+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
-@@ -49,40 +49,40 @@
- leds {
- compatible = "gpio-leds";
-
-- power0 {
-+ led-power0 {
- label = "bcm53xx:green:power";
- gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-on";
- };
-
-- power1 {
-+ led-power1 {
- label = "bcm53xx:red:power";
- gpios = <&hc595 2 GPIO_ACTIVE_HIGH>;
- };
-
-- router0 {
-+ led-router0 {
- label = "bcm53xx:green:router";
- gpios = <&hc595 3 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-on";
- };
-
-- router1 {
-+ led-router1 {
- label = "bcm53xx:amber:router";
- gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
- };
-
-- wan {
-+ led-wan {
- label = "bcm53xx:green:wan";
- gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-on";
- };
-
-- wireless0 {
-+ led-wireless0 {
- label = "bcm53xx:green:wireless";
- gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
- };
-
-- wireless1 {
-+ led-wireless1 {
- label = "bcm53xx:amber:wireless";
- gpios = <&hc595 7 GPIO_ACTIVE_HIGH>;
- };
---- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
-+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
-@@ -49,45 +49,45 @@
- leds {
- compatible = "gpio-leds";
-
-- usb {
-+ led-usb {
- label = "bcm53xx:green:usb";
- gpios = <&hc595 0 GPIO_ACTIVE_HIGH>;
- };
-
-- power0 {
-+ led-power0 {
- label = "bcm53xx:green:power";
- gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-on";
- };
-
-- power1 {
-+ led-power1 {
- label = "bcm53xx:red:power";
- gpios = <&hc595 2 GPIO_ACTIVE_HIGH>;
- };
-
-- router0 {
-+ led-router0 {
- label = "bcm53xx:green:router";
- gpios = <&hc595 3 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-on";
- };
-
-- router1 {
-+ led-router1 {
- label = "bcm53xx:amber:router";
- gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
- };
-
-- wan {
-+ led-wan {
- label = "bcm53xx:green:wan";
- gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-on";
- };
-
-- wireless0 {
-+ led-wireless0 {
- label = "bcm53xx:green:wireless";
- gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
- };
-
-- wireless1 {
-+ led-wireless1 {
- label = "bcm53xx:amber:wireless";
- gpios = <&hc595 7 GPIO_ACTIVE_HIGH>;
- };
---- a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
-+++ b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
-@@ -23,19 +23,19 @@
- leds {
- compatible = "gpio-leds";
-
-- 5ghz {
-+ led-5ghz {
- label = "bcm53xx:blue:5ghz";
- gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "none";
- };
-
-- 2ghz {
-+ led-2ghz {
- label = "bcm53xx:blue:2ghz";
- gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "none";
- };
-
-- status {
-+ led-status {
- label = "bcm53xx:green:status";
- gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "timer";
---- a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
-+++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
-@@ -29,62 +29,62 @@
- leds {
- compatible = "gpio-leds";
-
-- power {
-+ led-power {
- label = "bcm53xx:green:power";
- gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-on";
- };
-
-- lan3 {
-+ led-lan3 {
- label = "bcm53xx:green:lan3";
- gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "none";
- };
-
-- lan4 {
-+ led-lan4 {
- label = "bcm53xx:green:lan4";
- gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "none";
- };
-
-- wan {
-+ led-wan {
- label = "bcm53xx:green:wan";
- gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "none";
- };
-
-- lan2 {
-+ led-lan2 {
- label = "bcm53xx:green:lan2";
- gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "none";
- };
-
-- usb {
-+ led-usb {
- label = "bcm53xx:green:usb";
- gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
- trigger-sources = <&ohci_port2>, <&ehci_port2>;
- linux,default-trigger = "usbport";
- };
-
-- status {
-+ led-status {
- label = "bcm53xx:green:status";
- gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "timer";
- };
-
-- 2ghz {
-+ led-2ghz {
- label = "bcm53xx:green:2ghz";
- gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "none";
- };
-
-- 5ghz {
-+ led-5ghz {
- label = "bcm53xx:green:5ghz";
- gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "none";
- };
-
-- lan1 {
-+ led-lan1 {
- label = "bcm53xx:green:lan1";
- gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "none";
---- a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
-+++ b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
-@@ -23,50 +23,50 @@
- leds {
- compatible = "gpio-leds";
-
-- 2ghz {
-+ led-2ghz {
- label = "bcm53xx:green:2ghz";
- gpios = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
- };
-
-- lan {
-+ led-lan {
- label = "bcm53xx:green:lan";
- gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
- };
-
-- usb2-port1 {
-+ led-usb2-port1 {
- label = "bcm53xx:green:usb2-port1";
- gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>;
- trigger-sources = <&ohci_port1>, <&ehci_port1>;
- linux,default-trigger = "usbport";
- };
-
-- power {
-+ led-power {
- label = "bcm53xx:green:power";
- gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-on";
- };
-
-- wan-green {
-+ led-wan-green {
- label = "bcm53xx:green:wan";
- gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
- };
-
-- wps {
-+ led-wps {
- label = "bcm53xx:green:wps";
- gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
- };
-
-- wan-amber {
-+ led-wan-amber {
- label = "bcm53xx:amber:wan";
- gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
- };
-
-- 5ghz {
-+ led-5ghz {
- label = "bcm53xx:green:5ghz";
- gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
- };
-
-- usb2-port2 {
-+ led-usb2-port2 {
- label = "bcm53xx:green:usb2-port2";
- gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
- trigger-sources = <&ohci_port2>, <&ehci_port2>;
---- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
-+++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
-@@ -28,18 +28,18 @@
- leds {
- compatible = "gpio-leds";
-
-- wps {
-+ led-wps {
- label = "bcm53xx:blue:wps";
- gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
- };
-
-- power {
-+ led-power {
- label = "bcm53xx:blue:power";
- gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-on";
- };
-
-- wan {
-+ led-wan {
- label = "bcm53xx:red:wan";
- gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
- };
---- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
-+++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
-@@ -28,48 +28,48 @@
- leds {
- compatible = "gpio-leds";
-
-- usb {
-+ led-usb {
- label = "bcm53xx:green:usb";
- gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
- };
-
-- power-amber {
-+ led-power-amber {
- label = "bcm53xx:amber:power";
- gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
- };
-
-- power-white {
-+ led-power-white {
- label = "bcm53xx:white:power";
- gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-on";
- };
-
-- router-amber {
-+ led-router-amber {
- label = "bcm53xx:amber:router";
- gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
- };
-
-- router-white {
-+ led-router-white {
- label = "bcm53xx:white:router";
- gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
- };
-
-- wan-amber {
-+ led-wan-amber {
- label = "bcm53xx:amber:wan";
- gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
- };
-
-- wan-white {
-+ led-wan-white {
- label = "bcm53xx:white:wan";
- gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
- };
-
-- wireless-amber {
-+ led-wireless-amber {
- label = "bcm53xx:amber:wireless";
- gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
- };
-
-- wireless-white {
-+ led-wireless-white {
- label = "bcm53xx:white:wireless";
- gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
- };
---- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
-+++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
-@@ -28,43 +28,43 @@
- leds {
- compatible = "gpio-leds";
-
-- power-white {
-+ led-power-white {
- label = "bcm53xx:white:power";
- gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-on";
- };
-
-- power-amber {
-+ led-power-amber {
- label = "bcm53xx:amber:power";
- gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
- };
-
-- 5ghz {
-+ led-5ghz {
- label = "bcm53xx:white:5ghz";
- gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
- };
-
-- 2ghz {
-+ led-2ghz {
- label = "bcm53xx:white:2ghz";
- gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
- };
-
-- wps {
-+ led-wps {
- label = "bcm53xx:white:wps";
- gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
- };
-
-- wireless {
-+ led-wireless {
- label = "bcm53xx:white:wireless";
- gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
- };
-
-- usb3 {
-+ led-usb3 {
- label = "bcm53xx:white:usb3";
- gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
- };
-
-- usb2 {
-+ led-usb2 {
- label = "bcm53xx:white:usb2";
- gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
- };
---- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-@@ -39,59 +39,59 @@
- leds {
- compatible = "gpio-leds";
-
-- power-white {
-+ led-power-white {
- label = "bcm53xx:white:power";
- gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-on";
- };
-
-- power-amber {
-+ led-power-amber {
- label = "bcm53xx:amber:power";
- gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
- };
-
-- wan-white {
-+ led-wan-white {
- label = "bcm53xx:white:wan";
- gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-on";
- };
-
-- wan-amber {
-+ led-wan-amber {
- label = "bcm53xx:amber:wan";
- gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
- };
-
-- 5ghz-1 {
-+ led-5ghz-1 {
- label = "bcm53xx:white:5ghz-1";
- gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
- };
-
-- 2ghz {
-+ led-2ghz {
- label = "bcm53xx:white:2ghz";
- gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
- };
-
-- wireless {
-+ led-wireless {
- label = "bcm53xx:white:wireless";
- gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
- };
-
-- wps {
-+ led-wps {
- label = "bcm53xx:white:wps";
- gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
- };
-
-- 5ghz-2 {
-+ led-5ghz-2 {
- label = "bcm53xx:white:5ghz-2";
- gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
- };
-
-- usb3 {
-+ led-usb3 {
- label = "bcm53xx:white:usb3";
- gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
- };
-
-- usb2 {
-+ led-usb2 {
- label = "bcm53xx:white:usb2";
- gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
- };
---- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
-+++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
-@@ -23,27 +23,27 @@
- leds {
- compatible = "gpio-leds";
-
-- lan {
-+ led-lan {
- label = "bcm53xx:blue:lan";
- gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
- };
-
-- wps {
-+ led-wps {
- label = "bcm53xx:blue:wps";
- gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>;
- };
-
-- 2ghz {
-+ led-2ghz {
- label = "bcm53xx:blue:2ghz";
- gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
- };
-
-- 5ghz {
-+ led-5ghz {
- label = "bcm53xx:blue:5ghz";
- gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
- };
-
-- usb3 {
-+ led-usb3 {
- label = "bcm53xx:blue:usb3";
- gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
- trigger-sources = <&ohci_port1>, <&ehci_port1>,
-@@ -51,24 +51,24 @@
- linux,default-trigger = "usbport";
- };
-
-- usb2 {
-+ led-usb2 {
- label = "bcm53xx:blue:usb2";
- gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
- trigger-sources = <&ohci_port2>, <&ehci_port2>;
- linux,default-trigger = "usbport";
- };
-
-- wan-blue {
-+ led-wan-blue {
- label = "bcm53xx:blue:wan";
- gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
- };
-
-- wan-amber {
-+ led-wan-amber {
- label = "bcm53xx:amber:wan";
- gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
- };
-
-- power {
-+ led-power {
- label = "bcm53xx:blue:power";
- gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-on";
---- a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
-+++ b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
-@@ -33,37 +33,37 @@
- leds {
- compatible = "gpio-leds";
-
-- power {
-+ led-power {
- label = "white:power";
- gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-on";
- };
-
-- wan-red {
-+ led-wan-red {
- label = "red:wan";
- gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
- };
-
-- lan {
-+ led-lan {
- label = "white:lan";
- gpios = <&chipcommon 21 GPIO_ACTIVE_LOW>;
- };
-
-- usb2 {
-+ led-usb2 {
- label = "white:usb2";
- gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
- trigger-sources = <&ehci_port2>;
- linux,default-trigger = "usbport";
- };
-
-- usb3 {
-+ led-usb3 {
- label = "white:usb3";
- gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
- trigger-sources = <&ehci_port1>, <&xhci_port1>;
- linux,default-trigger = "usbport";
- };
-
-- wps {
-+ led-wps {
- label = "white:wps";
- gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
- };
---- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
-+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
-@@ -43,28 +43,28 @@
- leds {
- compatible = "gpio-leds";
-
-- power-white {
-+ led-power-white {
- label = "bcm53xx:white:power";
- gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-on";
- };
-
-- wan-white {
-+ led-wan-white {
- label = "bcm53xx:white:wan";
- gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
- };
-
-- power-amber {
-+ led-power-amber {
- label = "bcm53xx:amber:power";
- gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
- };
-
-- wan-amber {
-+ led-wan-amber {
- label = "bcm53xx:amber:wan";
- gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
- };
-
-- usb3-white {
-+ led-usb3-white {
- label = "bcm53xx:white:usb3";
- gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
- trigger-sources = <&ohci_port1>, <&ehci_port1>,
-@@ -72,12 +72,12 @@
- linux,default-trigger = "usbport";
- };
-
-- 2ghz {
-+ led-2ghz {
- label = "bcm53xx:white:2ghz";
- gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
- };
-
-- 5ghz {
-+ led-5ghz {
- label = "bcm53xx:white:5ghz";
- gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
- };
---- a/arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts
-+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts
-@@ -41,47 +41,47 @@
- */
- compatible = "gpio-leds";
-
-- power-white {
-+ led-power-white {
- label = "bcm53xx:white:power";
- gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-on";
- };
-
-- wan-white {
-+ led-wan-white {
- label = "bcm53xx:white:wan";
- gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
- };
-
-- power-amber {
-+ led-power-amber {
- label = "bcm53xx:amber:power";
- gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
- };
-
-- wan-amber {
-+ led-wan-amber {
- label = "bcm53xx:amber:wan";
- gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
- };
-
-- usb3-white {
-+ led-usb3-white {
- label = "bcm53xx:white:usb3";
- gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
- trigger-sources = <&xhci_port1>;
- linux,default-trigger = "usbport";
- };
-
-- usb2-white {
-+ led-usb2-white {
- label = "bcm53xx:white:usb2";
- gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
- trigger-sources = <&ohci_port1>, <&ehci_port1>;
- linux,default-trigger = "usbport";
- };
-
-- 2ghz {
-+ led-2ghz {
- label = "bcm53xx:white:2ghz";
- gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
- };
-
-- 5ghz {
-+ led-5ghz {
- label = "bcm53xx:white:5ghz";
- gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
- };
---- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
-+++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
-@@ -52,19 +52,19 @@
- leds {
- compatible = "gpio-leds";
-
-- wps {
-+ led-wps {
- label = "bcm53xx:white:wps";
- gpios = <&chipcommon 22 GPIO_ACTIVE_LOW>;
- };
-
-- usb2 {
-+ led-usb2 {
- label = "bcm53xx:green:usb2";
- gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
- trigger-sources = <&ohci_port2>, <&ehci_port2>;
- linux,default-trigger = "usbport";
- };
-
-- usb3 {
-+ led-usb3 {
- label = "bcm53xx:green:usb3";
- gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
- trigger-sources = <&ohci_port1>, <&ehci_port1>,
-@@ -72,58 +72,58 @@
- linux,default-trigger = "usbport";
- };
-
-- power {
-+ led-power {
- label = "bcm53xx:white:power";
- gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-on";
- };
-
-- wifi-disabled {
-+ led-wifi-disabled {
- label = "bcm53xx:amber:wifi-disabled";
- gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
- };
-
-- wifi-enabled {
-+ led-wifi-enabled {
- label = "bcm53xx:white:wifi-enabled";
- gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
- };
-
-- bluebar1 {
-+ led-bluebar1 {
- label = "bcm53xx:white:bluebar1";
- gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
- };
-
-- bluebar2 {
-+ led-bluebar2 {
- label = "bcm53xx:white:bluebar2";
- gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
- };
-
-- bluebar3 {
-+ led-bluebar3 {
- label = "bcm53xx:white:bluebar3";
- gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
- };
-
-- bluebar4 {
-+ led-bluebar4 {
- label = "bcm53xx:white:bluebar4";
- gpios = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
- };
-
-- bluebar5 {
-+ led-bluebar5 {
- label = "bcm53xx:white:bluebar5";
- gpios = <&chipcommon 19 GPIO_ACTIVE_HIGH>;
- };
-
-- bluebar6 {
-+ led-bluebar6 {
- label = "bcm53xx:white:bluebar6";
- gpios = <&chipcommon 20 GPIO_ACTIVE_HIGH>;
- };
-
-- bluebar7 {
-+ led-bluebar7 {
- label = "bcm53xx:white:bluebar7";
- gpios = <&chipcommon 21 GPIO_ACTIVE_HIGH>;
- };
-
-- bluebar8 {
-+ led-bluebar8 {
- label = "bcm53xx:white:bluebar8";
- gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
- };
---- a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
-@@ -30,13 +30,13 @@
- leds {
- compatible = "gpio-leds";
-
-- status {
-+ led-status {
- label = "bcm53xx:green:status";
- gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "timer";
- };
-
-- usb3 {
-+ led-usb3 {
- label = "bcm53xx:green:usb3";
- gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
- trigger-sources = <&ohci_port1>, <&ehci_port1>,
---- a/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts
-@@ -23,18 +23,18 @@
- leds {
- compatible = "gpio-leds";
-
-- status {
-+ led-status {
- label = "bcm53xx:green:status";
- gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "timer";
- };
-
-- 2ghz {
-+ led-2ghz {
- label = "bcm53xx:blue:2ghz";
- gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
- };
-
-- 5ghz {
-+ led-5ghz {
- label = "bcm53xx:blue:5ghz";
- gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
- };
---- a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
-@@ -30,13 +30,13 @@
- leds {
- compatible = "gpio-leds";
-
-- status {
-+ led-status {
- label = "bcm53xx:green:status";
- gpios = <&chipcommon 20 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "timer";
- };
-
-- usb3 {
-+ led-usb3 {
- label = "bcm53xx:green:usb3";
- gpios = <&chipcommon 19 GPIO_ACTIVE_HIGH>;
- trigger-sources = <&ohci_port1>, <&ehci_port1>,
---- a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
-@@ -25,7 +25,7 @@
- leds {
- compatible = "gpio-leds";
-
-- status {
-+ led-status {
- label = "bcm53xx:green:status";
- gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "timer";
---- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
-@@ -30,38 +30,38 @@
- leds {
- compatible = "gpio-leds";
-
-- power {
-+ led-power {
- label = "bcm53xx:green:power";
- gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-on";
- };
-
-- lan3 {
-+ led-lan3 {
- label = "bcm53xx:green:lan3";
- gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
- };
-
-- lan4 {
-+ led-lan4 {
- label = "bcm53xx:green:lan4";
- gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
- };
-
-- wan {
-+ led-wan {
- label = "bcm53xx:green:wan";
- gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
- };
-
-- lan1 {
-+ led-lan1 {
- label = "bcm53xx:green:lan1";
- gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
- };
-
-- lan2 {
-+ led-lan2 {
- label = "bcm53xx:green:lan2";
- gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
- };
-
-- usb3 {
-+ led-usb3 {
- label = "bcm53xx:green:usb3";
- gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
- trigger-sources = <&ohci_port1>, <&ehci_port1>,
-@@ -69,18 +69,18 @@
- linux,default-trigger = "usbport";
- };
-
-- status {
-+ led-status {
- label = "bcm53xx:green:status";
- gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "timer";
- };
-
-- 2ghz {
-+ led-2ghz {
- label = "bcm53xx:green:2ghz";
- gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
- };
-
-- 5ghz {
-+ led-5ghz {
- label = "bcm53xx:green:5ghz";
- gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
- };
---- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
-@@ -33,13 +33,13 @@
- leds {
- compatible = "gpio-leds";
-
-- power {
-+ led-power {
- label = "bcm53xx:green:power";
- gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-on";
- };
-
-- usb3 {
-+ led-usb3 {
- label = "bcm53xx:green:usb3";
- gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
- trigger-sources = <&ohci_port1>, <&ehci_port1>,
-@@ -47,18 +47,18 @@
- linux,default-trigger = "usbport";
- };
-
-- status {
-+ led-status {
- label = "bcm53xx:green:status";
- gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "timer";
- };
-
-- 2ghz {
-+ led-2ghz {
- label = "bcm53xx:green:2ghz";
- gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
- };
-
-- 5ghz {
-+ led-5ghz {
- label = "bcm53xx:green:5ghz";
- gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
- };
---- a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
-+++ b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
-@@ -25,38 +25,38 @@
- leds {
- compatible = "gpio-leds";
-
-- power0 {
-+ led-power0 {
- label = "bcm53xx:white:power";
- gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-on";
- };
-
-- power1 {
-+ led-power1 {
- label = "bcm53xx:amber:power";
- gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
- };
-
-- 5ghz-1 {
-+ led-5ghz-1 {
- label = "bcm53xx:white:5ghz-1";
- gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
- };
-
-- 5ghz-2 {
-+ led-5ghz-2 {
- label = "bcm53xx:white:5ghz-2";
- gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
- };
-
-- 2ghz {
-+ led-2ghz {
- label = "bcm53xx:white:2ghz";
- gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
- };
-
-- usb2 {
-+ led-usb2 {
- label = "bcm53xx:white:usb2";
- gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
- };
-
-- usb3 {
-+ led-usb3 {
- label = "bcm53xx:white:usb3";
- gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
- };
---- a/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
-+++ b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
-@@ -23,13 +23,13 @@
- leds {
- compatible = "gpio-leds";
-
-- wlan {
-+ led-wlan {
- label = "bcm53xx:blue:wlan";
- gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
- };
-
-- system {
-+ led-system {
- label = "bcm53xx:green:system";
- gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "timer";
---- a/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
-+++ b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
-@@ -20,26 +20,26 @@
- reg = <0x00000000 0x08000000>;
- };
-
-- leds {
-+ leds-0 {
- compatible = "gpio-leds";
-
-- 5ghz {
-+ led-5ghz {
- label = "bcm53xx:blue:5ghz";
- gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
- };
-
-- system {
-+ led-system {
- label = "bcm53xx:green:system";
- gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "timer";
- };
- };
-
-- pcie0_leds {
-+ leds-1 {
- compatible = "gpio-leds";
-
-- 2ghz {
-+ led-2ghz {
- label = "bcm53xx:blue:2ghz";
- gpios = <&pcie0_chipcommon 3 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
---- a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
-+++ b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
-@@ -20,37 +20,37 @@
- reg = <0x00000000 0x08000000>;
- };
-
-- leds {
-+ leds-0 {
- compatible = "gpio-leds";
-
-- usb {
-+ led-usb {
- label = "bcm53xx:blue:usb";
- gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
- trigger-sources = <&ohci_port1>, <&ehci_port1>;
- linux,default-trigger = "usbport";
- };
-
-- wps {
-+ led-wps {
- label = "bcm53xx:blue:wps";
- gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
- };
-
-- 5ghz {
-+ led-5ghz {
- label = "bcm53xx:blue:5ghz";
- gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
- };
-
-- system {
-+ led-system {
- label = "bcm53xx:blue:system";
- gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "timer";
- };
- };
-
-- pcie0_leds {
-+ leds-1 {
- compatible = "gpio-leds";
-
-- 2ghz {
-+ led-2ghz {
- label = "bcm53xx:blue:2ghz";
- gpios = <&pcie0_chipcommon 3 GPIO_ACTIVE_HIGH>;
- };
---- a/arch/arm/boot/dts/bcm53016-dlink-dwl-8610ap.dts
-+++ b/arch/arm/boot/dts/bcm53016-dlink-dwl-8610ap.dts
-@@ -20,14 +20,14 @@
- leds {
- compatible = "gpio-leds";
-
-- power {
-+ led-power {
- function = LED_FUNCTION_POWER;
- color = <LED_COLOR_ID_GREEN>;
- gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
- default-state = "on";
- };
-
-- diag {
-+ led-diag {
- /* Actually "diag" unclear what this means */
- function = LED_FUNCTION_INDICATOR;
- color = <LED_COLOR_ID_RED>;
-@@ -36,13 +36,13 @@
- linux,default-trigger = "heartbeat";
- };
-
-- wlan-2g {
-+ led-wlan-2g {
- function = LED_FUNCTION_WLAN;
- color = <LED_COLOR_ID_GREEN>;
- gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
- };
-
-- wlan-5g {
-+ led-wlan-5g {
- function = LED_FUNCTION_WLAN;
- color = <LED_COLOR_ID_GREEN>;
- gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
---- a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
-+++ b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
-@@ -58,7 +58,7 @@
- pwm-leds {
- compatible = "pwm-leds";
-
-- red {
-+ led-0 {
- /* SYS-LED 1 - Tricolor */
- function = LED_FUNCTION_INDICATOR;
- color = <LED_COLOR_ID_RED>;
-@@ -66,7 +66,7 @@
- max-brightness = <255>;
- };
-
-- green {
-+ led-1 {
- /* SYS-LED 1 - Tricolor */
- function = LED_FUNCTION_POWER;
- color = <LED_COLOR_ID_GREEN>;
-@@ -74,7 +74,7 @@
- max-brightness = <255>;
- };
-
-- blue {
-+ led-2 {
- /* SYS-LED 1 - Tricolor */
- function = LED_FUNCTION_INDICATOR;
- color = <LED_COLOR_ID_BLUE>;
---- a/arch/arm/boot/dts/bcm947189acdbmr.dts
-+++ b/arch/arm/boot/dts/bcm947189acdbmr.dts
-@@ -25,17 +25,17 @@
- leds {
- compatible = "gpio-leds";
-
-- wps {
-+ led-wps {
- label = "bcm53xx:blue:wps";
- gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
- };
-
-- 5ghz {
-+ led-5ghz {
- label = "bcm53xx:blue:5ghz";
- gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
- };
-
-- 2ghz {
-+ led-2ghz {
- label = "bcm53xx:blue:2ghz";
- gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
- };
diff --git a/target/linux/bcm53xx/patches-6.1/031-v6.5-0001-ARM-dts-BCM5301X-Relicense-Rafa-s-code-to-the-GPL-2..patch b/target/linux/bcm53xx/patches-6.1/031-v6.5-0001-ARM-dts-BCM5301X-Relicense-Rafa-s-code-to-the-GPL-2..patch
deleted file mode 100644
index 4744e6d5b1..0000000000
--- a/target/linux/bcm53xx/patches-6.1/031-v6.5-0001-ARM-dts-BCM5301X-Relicense-Rafa-s-code-to-the-GPL-2..patch
+++ /dev/null
@@ -1,487 +0,0 @@
-From 915fac07f053418d0ab9075af64da2872ca8a7f8 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal at milecki.pl>
-Date: Wed, 3 May 2023 14:16:10 +0200
-Subject: [PATCH] =?UTF-8?q?ARM:=20dts:=20BCM5301X:=20Relicense=20Rafa?=
- =?UTF-8?q?=C5=82's=20code=20to=20the=20GPL=202.0+=20/=20MIT?=
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-All BCM5301X device DTS files use dual licensing. Try the same for SoC.
-Introduce a new .dtsi file with a proper SPDX tag.
-
-Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
-Link: https://lore.kernel.org/r/20230503121611.1629-1-zajec5@gmail.com
-Signed-off-by: Florian Fainelli <f.fainelli at gmail.com>
----
- MAINTAINERS | 1 +
- arch/arm/boot/dts/bcm-ns.dtsi | 202 ++++++++++++++++++++++++++++++++
- arch/arm/boot/dts/bcm5301x.dtsi | 192 +-----------------------------
- 3 files changed, 205 insertions(+), 190 deletions(-)
- create mode 100644 arch/arm/boot/dts/bcm-ns.dtsi
-
---- a/MAINTAINERS
-+++ b/MAINTAINERS
-@@ -4063,6 +4063,7 @@ M: Rafał Miłecki <zajec5 at gmail.com>
- R: Broadcom internal kernel review list <bcm-kernel-feedback-list at broadcom.com>
- L: linux-arm-kernel at lists.infradead.org (moderated for non-subscribers)
- S: Maintained
-+F: arch/arm/boot/dts/bcm-ns.dtsi
- F: arch/arm/boot/dts/bcm470*
- F: arch/arm/boot/dts/bcm5301*
- F: arch/arm/boot/dts/bcm953012*
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm-ns.dtsi
-@@ -0,0 +1,202 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-+
-+#include <dt-bindings/clock/bcm-nsp.h>
-+#include <dt-bindings/gpio/gpio.h>
-+#include <dt-bindings/input/input.h>
-+#include <dt-bindings/interrupt-controller/irq.h>
-+#include <dt-bindings/interrupt-controller/arm-gic.h>
-+
-+/ {
-+ axi at 18000000 {
-+ compatible = "brcm,bus-axi";
-+ reg = <0x18000000 0x1000>;
-+ ranges = <0x00000000 0x18000000 0x00100000>;
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ chipcommon: chipcommon at 0 {
-+ reg = <0x00000000 0x1000>;
-+
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ };
-+
-+ pcie0: pcie at 12000 {
-+ reg = <0x00012000 0x1000>;
-+ };
-+
-+ pcie1: pcie at 13000 {
-+ reg = <0x00013000 0x1000>;
-+ };
-+
-+ usb2: usb2 at 21000 {
-+ reg = <0x00021000 0x1000>;
-+
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ ranges;
-+
-+ interrupt-parent = <&gic>;
-+
-+ ehci: usb at 21000 {
-+ #usb-cells = <0>;
-+
-+ compatible = "generic-ehci";
-+ reg = <0x00021000 0x1000>;
-+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
-+ phys = <&usb2_phy>;
-+
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ ehci_port1: port at 1 {
-+ reg = <1>;
-+ #trigger-source-cells = <0>;
-+ };
-+
-+ ehci_port2: port at 2 {
-+ reg = <2>;
-+ #trigger-source-cells = <0>;
-+ };
-+ };
-+
-+ ohci: usb at 22000 {
-+ #usb-cells = <0>;
-+
-+ compatible = "generic-ohci";
-+ reg = <0x00022000 0x1000>;
-+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
-+
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ ohci_port1: port at 1 {
-+ reg = <1>;
-+ #trigger-source-cells = <0>;
-+ };
-+
-+ ohci_port2: port at 2 {
-+ reg = <2>;
-+ #trigger-source-cells = <0>;
-+ };
-+ };
-+ };
-+
-+ usb3: usb3 at 23000 {
-+ reg = <0x00023000 0x1000>;
-+
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ ranges;
-+
-+ interrupt-parent = <&gic>;
-+
-+ xhci: usb at 23000 {
-+ #usb-cells = <0>;
-+
-+ compatible = "generic-xhci";
-+ reg = <0x00023000 0x1000>;
-+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
-+ phys = <&usb3_phy>;
-+ phy-names = "usb";
-+
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ xhci_port1: port at 1 {
-+ reg = <1>;
-+ #trigger-source-cells = <0>;
-+ };
-+ };
-+ };
-+ };
-+
-+ mdio: mdio at 18003000 {
-+ compatible = "brcm,iproc-mdio";
-+ reg = <0x18003000 0x8>;
-+ #size-cells = <0>;
-+ #address-cells = <1>;
-+ };
-+
-+ dmu-bus at 1800c000 {
-+ compatible = "simple-bus";
-+ ranges = <0 0x1800c000 0x1000>;
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ cru-bus at 100 {
-+ compatible = "brcm,ns-cru", "simple-mfd";
-+ reg = <0x100 0x1a4>;
-+ ranges;
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ usb2_phy: phy at 164 {
-+ compatible = "brcm,ns-usb2-phy";
-+ reg = <0x164 0x4>;
-+ brcm,syscon-clkset = <&cru_clkset>;
-+ clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>;
-+ clock-names = "phy-ref-clk";
-+ #phy-cells = <0>;
-+ };
-+
-+ cru_clkset: syscon at 180 {
-+ compatible = "brcm,cru-clkset", "syscon";
-+ reg = <0x180 0x4>;
-+ };
-+
-+ pinctrl: pinctrl at 1c0 {
-+ compatible = "brcm,bcm4708-pinmux";
-+ reg = <0x1c0 0x24>;
-+ reg-names = "cru_gpio_control";
-+
-+ spi-pins {
-+ groups = "spi_grp";
-+ function = "spi";
-+ };
-+
-+ pinmux_i2c: i2c-pins {
-+ groups = "i2c_grp";
-+ function = "i2c";
-+ };
-+
-+ pinmux_pwm: pwm-pins {
-+ groups = "pwm0_grp", "pwm1_grp",
-+ "pwm2_grp", "pwm3_grp";
-+ function = "pwm";
-+ };
-+
-+ pinmux_uart1: uart1-pins {
-+ groups = "uart1_grp";
-+ function = "uart1";
-+ };
-+ };
-+
-+ thermal: thermal at 2c0 {
-+ compatible = "brcm,ns-thermal";
-+ reg = <0x2c0 0x10>;
-+ #thermal-sensor-cells = <0>;
-+ };
-+ };
-+ };
-+
-+ thermal-zones {
-+ cpu_thermal: cpu-thermal {
-+ polling-delay-passive = <0>;
-+ polling-delay = <1000>;
-+ coefficients = <(-556) 418000>;
-+ thermal-sensors = <&thermal>;
-+
-+ trips {
-+ cpu-crit {
-+ temperature = <125000>;
-+ hysteresis = <0>;
-+ type = "critical";
-+ };
-+ };
-+
-+ cooling-maps {
-+ };
-+ };
-+ };
-+};
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -8,11 +8,7 @@
- * Licensed under the GNU/GPL. See COPYING for details.
- */
-
--#include <dt-bindings/clock/bcm-nsp.h>
--#include <dt-bindings/gpio/gpio.h>
--#include <dt-bindings/input/input.h>
--#include <dt-bindings/interrupt-controller/irq.h>
--#include <dt-bindings/interrupt-controller/arm-gic.h>
-+#include "bcm-ns.dtsi"
-
- / {
- #address-cells = <1>;
-@@ -149,12 +145,6 @@
- };
-
- axi at 18000000 {
-- compatible = "brcm,bus-axi";
-- reg = <0x18000000 0x1000>;
-- ranges = <0x00000000 0x18000000 0x00100000>;
-- #address-cells = <1>;
-- #size-cells = <1>;
--
- #interrupt-cells = <1>;
- interrupt-map-mask = <0x000fffff 0xffff>;
- interrupt-map =
-@@ -228,108 +218,15 @@
- <0x00028000 6 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
- <0x00028000 7 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-
-- chipcommon: chipcommon at 0 {
-- reg = <0x00000000 0x1000>;
--
-- gpio-controller;
-- #gpio-cells = <2>;
-+ chipcommon at 0 {
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
-- pcie0: pcie at 12000 {
-- reg = <0x00012000 0x1000>;
-- };
--
-- pcie1: pcie at 13000 {
-- reg = <0x00013000 0x1000>;
-- };
--
- pcie2: pcie at 14000 {
- reg = <0x00014000 0x1000>;
- };
-
-- usb2: usb2 at 21000 {
-- reg = <0x00021000 0x1000>;
--
-- #address-cells = <1>;
-- #size-cells = <1>;
-- ranges;
--
-- interrupt-parent = <&gic>;
--
-- ehci: usb at 21000 {
-- #usb-cells = <0>;
--
-- compatible = "generic-ehci";
-- reg = <0x00021000 0x1000>;
-- interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
-- phys = <&usb2_phy>;
--
-- #address-cells = <1>;
-- #size-cells = <0>;
--
-- ehci_port1: port at 1 {
-- reg = <1>;
-- #trigger-source-cells = <0>;
-- };
--
-- ehci_port2: port at 2 {
-- reg = <2>;
-- #trigger-source-cells = <0>;
-- };
-- };
--
-- ohci: usb at 22000 {
-- #usb-cells = <0>;
--
-- compatible = "generic-ohci";
-- reg = <0x00022000 0x1000>;
-- interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
--
-- #address-cells = <1>;
-- #size-cells = <0>;
--
-- ohci_port1: port at 1 {
-- reg = <1>;
-- #trigger-source-cells = <0>;
-- };
--
-- ohci_port2: port at 2 {
-- reg = <2>;
-- #trigger-source-cells = <0>;
-- };
-- };
-- };
--
-- usb3: usb3 at 23000 {
-- reg = <0x00023000 0x1000>;
--
-- #address-cells = <1>;
-- #size-cells = <1>;
-- ranges;
--
-- interrupt-parent = <&gic>;
--
-- xhci: usb at 23000 {
-- #usb-cells = <0>;
--
-- compatible = "generic-xhci";
-- reg = <0x00023000 0x1000>;
-- interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
-- phys = <&usb3_phy>;
-- phy-names = "usb";
--
-- #address-cells = <1>;
-- #size-cells = <0>;
--
-- xhci_port1: port at 1 {
-- reg = <1>;
-- #trigger-source-cells = <0>;
-- };
-- };
-- };
--
- gmac0: ethernet at 24000 {
- reg = <0x24000 0x800>;
- };
-@@ -355,13 +252,6 @@
- status = "disabled";
- };
-
-- mdio: mdio at 18003000 {
-- compatible = "brcm,iproc-mdio";
-- reg = <0x18003000 0x8>;
-- #size-cells = <0>;
-- #address-cells = <1>;
-- };
--
- mdio-mux at 18003000 {
- compatible = "mdio-mux-mmioreg", "mdio-mux";
- mdio-parent-bus = <&mdio>;
-@@ -409,18 +299,7 @@
- };
-
- dmu-bus at 1800c000 {
-- compatible = "simple-bus";
-- ranges = <0 0x1800c000 0x1000>;
-- #address-cells = <1>;
-- #size-cells = <1>;
--
- cru-bus at 100 {
-- compatible = "brcm,ns-cru", "simple-mfd";
-- reg = <0x100 0x1a4>;
-- ranges;
-- #address-cells = <1>;
-- #size-cells = <1>;
--
- lcpll0: clock-controller at 100 {
- #clock-cells = <1>;
- compatible = "brcm,nsp-lcpll0";
-@@ -440,53 +319,6 @@
- "usbclk", "iprocfast",
- "sata1", "sata2";
- };
--
-- usb2_phy: phy at 164 {
-- compatible = "brcm,ns-usb2-phy";
-- reg = <0x164 0x4>;
-- brcm,syscon-clkset = <&cru_clkset>;
-- clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>;
-- clock-names = "phy-ref-clk";
-- #phy-cells = <0>;
-- };
--
-- cru_clkset: syscon at 180 {
-- compatible = "brcm,cru-clkset", "syscon";
-- reg = <0x180 0x4>;
-- };
--
-- pinctrl: pinctrl at 1c0 {
-- compatible = "brcm,bcm4708-pinmux";
-- reg = <0x1c0 0x24>;
-- reg-names = "cru_gpio_control";
--
-- spi-pins {
-- groups = "spi_grp";
-- function = "spi";
-- };
--
-- pinmux_i2c: i2c-pins {
-- groups = "i2c_grp";
-- function = "i2c";
-- };
--
-- pinmux_pwm: pwm-pins {
-- groups = "pwm0_grp", "pwm1_grp",
-- "pwm2_grp", "pwm3_grp";
-- function = "pwm";
-- };
--
-- pinmux_uart1: uart1-pins {
-- groups = "uart1_grp";
-- function = "uart1";
-- };
-- };
--
-- thermal: thermal at 2c0 {
-- compatible = "brcm,ns-thermal";
-- reg = <0x2c0 0x10>;
-- #thermal-sensor-cells = <0>;
-- };
- };
- };
-
-@@ -557,24 +389,4 @@
- };
- };
- };
--
-- thermal-zones {
-- cpu_thermal: cpu-thermal {
-- polling-delay-passive = <0>;
-- polling-delay = <1000>;
-- coefficients = <(-556) 418000>;
-- thermal-sensors = <&thermal>;
--
-- trips {
-- cpu-crit {
-- temperature = <125000>;
-- hysteresis = <0>;
-- type = "critical";
-- };
-- };
--
-- cooling-maps {
-- };
-- };
-- };
- };
diff --git a/target/linux/bcm53xx/patches-6.1/031-v6.5-0002-ARM-dts-BCM5301X-Relicense-Florian-s-code-to-the-GPL.patch b/target/linux/bcm53xx/patches-6.1/031-v6.5-0002-ARM-dts-BCM5301X-Relicense-Florian-s-code-to-the-GPL.patch
deleted file mode 100644
index b98f2daa67..0000000000
--- a/target/linux/bcm53xx/patches-6.1/031-v6.5-0002-ARM-dts-BCM5301X-Relicense-Florian-s-code-to-the-GPL.patch
+++ /dev/null
@@ -1,136 +0,0 @@
-From 916553449561c4f0b61c71b751b7bb583f5dddd4 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal at milecki.pl>
-Date: Wed, 3 May 2023 14:16:11 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Relicense Florian's code to the GPL 2.0+
- / MIT
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-All BCM5301X device DTS files use dual licensing. Try the same for SoC.
-
-Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
-Link: https://lore.kernel.org/r/20230503121611.1629-2-zajec5@gmail.com
-Signed-off-by: Florian Fainelli <f.fainelli at gmail.com>
----
- arch/arm/boot/dts/bcm-ns.dtsi | 36 ++++++++++++++++++++++++++++++
- arch/arm/boot/dts/bcm5301x.dtsi | 39 ---------------------------------
- 2 files changed, 36 insertions(+), 39 deletions(-)
-
---- a/arch/arm/boot/dts/bcm-ns.dtsi
-+++ b/arch/arm/boot/dts/bcm-ns.dtsi
-@@ -19,6 +19,8 @@
-
- gpio-controller;
- #gpio-cells = <2>;
-+ interrupt-controller;
-+ #interrupt-cells = <2>;
- };
-
- pcie0: pcie at 12000 {
-@@ -109,6 +111,22 @@
- };
- };
- };
-+
-+ gmac0: ethernet at 24000 {
-+ reg = <0x24000 0x800>;
-+ };
-+
-+ gmac1: ethernet at 25000 {
-+ reg = <0x25000 0x800>;
-+ };
-+
-+ gmac2: ethernet at 26000 {
-+ reg = <0x26000 0x800>;
-+ };
-+
-+ gmac3: ethernet at 27000 {
-+ reg = <0x27000 0x800>;
-+ };
- };
-
- mdio: mdio at 18003000 {
-@@ -118,6 +136,24 @@
- #address-cells = <1>;
- };
-
-+ rng: rng at 18004000 {
-+ compatible = "brcm,bcm5301x-rng";
-+ reg = <0x18004000 0x14>;
-+ };
-+
-+ srab: ethernet-switch at 18007000 {
-+ compatible = "brcm,bcm53011-srab", "brcm,bcm5301x-srab";
-+ reg = <0x18007000 0x1000>;
-+
-+ status = "disabled";
-+
-+ /* ports are defined in board DTS */
-+ ports {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ };
-+ };
-+
- dmu-bus at 1800c000 {
- compatible = "simple-bus";
- ranges = <0 0x1800c000 0x1000>;
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -218,30 +218,9 @@
- <0x00028000 6 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
- <0x00028000 7 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-
-- chipcommon at 0 {
-- interrupt-controller;
-- #interrupt-cells = <2>;
-- };
--
- pcie2: pcie at 14000 {
- reg = <0x00014000 0x1000>;
- };
--
-- gmac0: ethernet at 24000 {
-- reg = <0x24000 0x800>;
-- };
--
-- gmac1: ethernet at 25000 {
-- reg = <0x25000 0x800>;
-- };
--
-- gmac2: ethernet at 26000 {
-- reg = <0x26000 0x800>;
-- };
--
-- gmac3: ethernet at 27000 {
-- reg = <0x27000 0x800>;
-- };
- };
-
- pwm: pwm at 18002000 {
-@@ -322,24 +301,6 @@
- };
- };
-
-- srab: ethernet-switch at 18007000 {
-- compatible = "brcm,bcm53011-srab", "brcm,bcm5301x-srab";
-- reg = <0x18007000 0x1000>;
--
-- status = "disabled";
--
-- /* ports are defined in board DTS */
-- ports {
-- #address-cells = <1>;
-- #size-cells = <0>;
-- };
-- };
--
-- rng: rng at 18004000 {
-- compatible = "brcm,bcm5301x-rng";
-- reg = <0x18004000 0x14>;
-- };
--
- nand_controller: nand-controller at 18028000 {
- compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", "brcm,brcmnand";
- reg = <0x18028000 0x600>, <0x1811a408 0x600>, <0x18028f00 0x20>;
diff --git a/target/linux/bcm53xx/patches-6.1/031-v6.5-0004-ARM-dts-BCM5301X-Relicense-Hauke-s-code-to-the-GPL-2.patch b/target/linux/bcm53xx/patches-6.1/031-v6.5-0004-ARM-dts-BCM5301X-Relicense-Hauke-s-code-to-the-GPL-2.patch
deleted file mode 100644
index 328748c8e0..0000000000
--- a/target/linux/bcm53xx/patches-6.1/031-v6.5-0004-ARM-dts-BCM5301X-Relicense-Hauke-s-code-to-the-GPL-2.patch
+++ /dev/null
@@ -1,249 +0,0 @@
-From b3b3cd885ed39cb4b38319a1c4fa4e41db6fee72 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal at milecki.pl>
-Date: Mon, 15 May 2023 17:19:20 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Relicense Hauke's code to the GPL 2.0+ /
- MIT
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Move code added by Hauke to the bcm-ns.dtsi which uses dual licensing.
-That syncs more Northstar code to be based on the same licensing schema.
-
-Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
-Cc: Hauke Mehrtens <hauke at hauke-m.de>
-Acked-by: Hauke Mehrtens <hauke at hauke-m.de>
-Link: https://lore.kernel.org/r/20230515151921.25021-1-zajec5@gmail.com
-Signed-off-by: Florian Fainelli <florian.fainelli at broadcom.com>
----
- arch/arm/boot/dts/bcm-ns.dtsi | 90 +++++++++++++++++++++++++++++++++
- arch/arm/boot/dts/bcm5301x.dtsi | 85 -------------------------------
- 2 files changed, 90 insertions(+), 85 deletions(-)
-
---- a/arch/arm/boot/dts/bcm-ns.dtsi
-+++ b/arch/arm/boot/dts/bcm-ns.dtsi
-@@ -1,4 +1,7 @@
- // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-+/*
-+ * Copyright 2013-2014 Hauke Mehrtens <hauke at hauke-m.de>
-+ */
-
- #include <dt-bindings/clock/bcm-nsp.h>
- #include <dt-bindings/gpio/gpio.h>
-@@ -7,6 +10,81 @@
- #include <dt-bindings/interrupt-controller/arm-gic.h>
-
- / {
-+ interrupt-parent = <&gic>;
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ chipcommon-a-bus at 18000000 {
-+ compatible = "simple-bus";
-+ ranges = <0x00000000 0x18000000 0x00001000>;
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ uart0: serial at 300 {
-+ compatible = "ns16550";
-+ reg = <0x0300 0x100>;
-+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&iprocslow>;
-+ status = "disabled";
-+ };
-+
-+ uart1: serial at 400 {
-+ compatible = "ns16550";
-+ reg = <0x0400 0x100>;
-+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&iprocslow>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinmux_uart1>;
-+ status = "disabled";
-+ };
-+ };
-+
-+ mpcore-bus at 19000000 {
-+ compatible = "simple-bus";
-+ ranges = <0x00000000 0x19000000 0x00023000>;
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ scu at 20000 {
-+ compatible = "arm,cortex-a9-scu";
-+ reg = <0x20000 0x100>;
-+ };
-+
-+ timer at 20200 {
-+ compatible = "arm,cortex-a9-global-timer";
-+ reg = <0x20200 0x100>;
-+ interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
-+ clocks = <&periph_clk>;
-+ };
-+
-+ timer at 20600 {
-+ compatible = "arm,cortex-a9-twd-timer";
-+ reg = <0x20600 0x20>;
-+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
-+ IRQ_TYPE_EDGE_RISING)>;
-+ clocks = <&periph_clk>;
-+ };
-+
-+ gic: interrupt-controller at 21000 {
-+ compatible = "arm,cortex-a9-gic";
-+ #interrupt-cells = <3>;
-+ #address-cells = <0>;
-+ interrupt-controller;
-+ reg = <0x21000 0x1000>,
-+ <0x20100 0x100>;
-+ };
-+
-+ L2: cache-controller at 22000 {
-+ compatible = "arm,pl310-cache";
-+ reg = <0x22000 0x1000>;
-+ cache-unified;
-+ arm,shared-override;
-+ prefetch-data = <1>;
-+ prefetch-instr = <1>;
-+ cache-level = <2>;
-+ };
-+ };
-+
- axi at 18000000 {
- compatible = "brcm,bus-axi";
- reg = <0x18000000 0x1000>;
-@@ -216,6 +294,18 @@
- };
- };
-
-+ nand_controller: nand-controller at 18028000 {
-+ compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", "brcm,brcmnand";
-+ reg = <0x18028000 0x600>, <0x1811a408 0x600>, <0x18028f00 0x20>;
-+ reg-names = "nand", "iproc-idm", "iproc-ext";
-+ interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
-+
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ brcm,nand-has-wp;
-+ };
-+
- thermal-zones {
- cpu_thermal: cpu-thermal {
- polling-delay-passive = <0>;
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -11,41 +11,7 @@
- #include "bcm-ns.dtsi"
-
- / {
-- #address-cells = <1>;
-- #size-cells = <1>;
-- interrupt-parent = <&gic>;
--
-- chipcommon-a-bus at 18000000 {
-- compatible = "simple-bus";
-- ranges = <0x00000000 0x18000000 0x00001000>;
-- #address-cells = <1>;
-- #size-cells = <1>;
--
-- uart0: serial at 300 {
-- compatible = "ns16550";
-- reg = <0x0300 0x100>;
-- interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
-- clocks = <&iprocslow>;
-- status = "disabled";
-- };
--
-- uart1: serial at 400 {
-- compatible = "ns16550";
-- reg = <0x0400 0x100>;
-- interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
-- clocks = <&iprocslow>;
-- pinctrl-names = "default";
-- pinctrl-0 = <&pinmux_uart1>;
-- status = "disabled";
-- };
-- };
--
- mpcore-bus at 19000000 {
-- compatible = "simple-bus";
-- ranges = <0x00000000 0x19000000 0x00023000>;
-- #address-cells = <1>;
-- #size-cells = <1>;
--
- a9pll: arm_clk at 0 {
- #clock-cells = <0>;
- compatible = "brcm,nsp-armpll";
-@@ -53,26 +19,6 @@
- reg = <0x00000 0x1000>;
- };
-
-- scu at 20000 {
-- compatible = "arm,cortex-a9-scu";
-- reg = <0x20000 0x100>;
-- };
--
-- timer at 20200 {
-- compatible = "arm,cortex-a9-global-timer";
-- reg = <0x20200 0x100>;
-- interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
-- clocks = <&periph_clk>;
-- };
--
-- timer at 20600 {
-- compatible = "arm,cortex-a9-twd-timer";
-- reg = <0x20600 0x20>;
-- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
-- IRQ_TYPE_EDGE_RISING)>;
-- clocks = <&periph_clk>;
-- };
--
- watchdog at 20620 {
- compatible = "arm,cortex-a9-twd-wdt";
- reg = <0x20620 0x20>;
-@@ -80,25 +26,6 @@
- IRQ_TYPE_EDGE_RISING)>;
- clocks = <&periph_clk>;
- };
--
-- gic: interrupt-controller at 21000 {
-- compatible = "arm,cortex-a9-gic";
-- #interrupt-cells = <3>;
-- #address-cells = <0>;
-- interrupt-controller;
-- reg = <0x21000 0x1000>,
-- <0x20100 0x100>;
-- };
--
-- L2: cache-controller at 22000 {
-- compatible = "arm,pl310-cache";
-- reg = <0x22000 0x1000>;
-- cache-unified;
-- arm,shared-override;
-- prefetch-data = <1>;
-- prefetch-instr = <1>;
-- cache-level = <2>;
-- };
- };
-
- pmu {
-@@ -301,18 +228,6 @@
- };
- };
-
-- nand_controller: nand-controller at 18028000 {
-- compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", "brcm,brcmnand";
-- reg = <0x18028000 0x600>, <0x1811a408 0x600>, <0x18028f00 0x20>;
-- reg-names = "nand", "iproc-idm", "iproc-ext";
-- interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
--
-- #address-cells = <1>;
-- #size-cells = <0>;
--
-- brcm,nand-has-wp;
-- };
--
- spi at 18029200 {
- compatible = "brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi";
- reg = <0x18029200 0x184>,
diff --git a/target/linux/bcm53xx/patches-6.1/031-v6.5-0005-ARM-dts-BCM5301X-Relicense-AXI-interrupts-code-to-th.patch b/target/linux/bcm53xx/patches-6.1/031-v6.5-0005-ARM-dts-BCM5301X-Relicense-AXI-interrupts-code-to-th.patch
deleted file mode 100644
index ef29266d0b..0000000000
--- a/target/linux/bcm53xx/patches-6.1/031-v6.5-0005-ARM-dts-BCM5301X-Relicense-AXI-interrupts-code-to-th.patch
+++ /dev/null
@@ -1,203 +0,0 @@
-From 3b3e35b279bee5e51580c648399e20323467f58c Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal at milecki.pl>
-Date: Mon, 15 May 2023 17:19:21 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Relicense AXI interrupts code to the GPL
- 2.0+ / MIT
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Those entries were added by:
-1. Hauke in commits dec378827c4a ("ARM: BCM5301X: Add IRQs to Broadcom's
- bus-axi in DTS file") and 1f80de6863ca ("ARM: BCM5301X: add IRQ
- numbers for PCIe controller")
-2. Florian in the commit 2cd0c0202f13 ("ARM: dts: BCM5301X: Add SRAB
- interrupts")
-
-Move them to the bcm-ns.dtsi which uses dual licensing. That syncs more
-Northstar code to be based on the same licensing schema.
-
-Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
-Cc: Hauke Mehrtens <hauke at hauke-m.de>
-Cc: Florian Fainelli <f.fainelli at gmail.com>
-Acked-by: Hauke Mehrtens <hauke at hauke-m.de>
-Link: https://lore.kernel.org/r/20230515151921.25021-2-zajec5@gmail.com
-Signed-off-by: Florian Fainelli <florian.fainelli at broadcom.com>
----
- arch/arm/boot/dts/bcm-ns.dtsi | 73 ++++++++++++++++++++++++++++++++
- arch/arm/boot/dts/bcm5301x.dtsi | 75 ---------------------------------
- 2 files changed, 73 insertions(+), 75 deletions(-)
-
---- a/arch/arm/boot/dts/bcm-ns.dtsi
-+++ b/arch/arm/boot/dts/bcm-ns.dtsi
-@@ -92,6 +92,79 @@
- #address-cells = <1>;
- #size-cells = <1>;
-
-+ #interrupt-cells = <1>;
-+ interrupt-map-mask = <0x000fffff 0xffff>;
-+ interrupt-map =
-+ /* ChipCommon */
-+ <0x00000000 0 &gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
-+
-+ /* Switch Register Access Block */
-+ <0x00007000 0 &gic GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00007000 1 &gic GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00007000 2 &gic GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00007000 3 &gic GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00007000 4 &gic GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00007000 5 &gic GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00007000 6 &gic GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00007000 7 &gic GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00007000 8 &gic GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00007000 9 &gic GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00007000 10 &gic GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00007000 11 &gic GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00007000 12 &gic GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
-+
-+ /* PCIe Controller 0 */
-+ <0x00012000 0 &gic GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00012000 1 &gic GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00012000 2 &gic GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00012000 3 &gic GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00012000 4 &gic GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00012000 5 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-+
-+ /* PCIe Controller 1 */
-+ <0x00013000 0 &gic GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00013000 1 &gic GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00013000 2 &gic GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00013000 3 &gic GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00013000 4 &gic GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00013000 5 &gic GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
-+
-+ /* PCIe Controller 2 */
-+ <0x00014000 0 &gic GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00014000 1 &gic GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00014000 2 &gic GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00014000 3 &gic GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00014000 4 &gic GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00014000 5 &gic GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
-+
-+ /* USB 2.0 Controller */
-+ <0x00021000 0 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
-+
-+ /* USB 3.0 Controller */
-+ <0x00023000 0 &gic GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
-+
-+ /* Ethernet Controller 0 */
-+ <0x00024000 0 &gic GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
-+
-+ /* Ethernet Controller 1 */
-+ <0x00025000 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
-+
-+ /* Ethernet Controller 2 */
-+ <0x00026000 0 &gic GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
-+
-+ /* Ethernet Controller 3 */
-+ <0x00027000 0 &gic GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
-+
-+ /* NAND Controller */
-+ <0x00028000 0 &gic GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00028000 1 &gic GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00028000 2 &gic GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00028000 3 &gic GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00028000 4 &gic GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00028000 5 &gic GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00028000 6 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00028000 7 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-+
- chipcommon: chipcommon at 0 {
- reg = <0x00000000 0x1000>;
-
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -3,8 +3,6 @@
- * Generic DTS part for all BCM53010, BCM53011, BCM53012, BCM53014, BCM53015,
- * BCM53016, BCM53017, BCM53018, BCM4707, BCM4708 and BCM4709 SoCs
- *
-- * Copyright 2013-2014 Hauke Mehrtens <hauke at hauke-m.de>
-- *
- * Licensed under the GNU/GPL. See COPYING for details.
- */
-
-@@ -72,79 +70,6 @@
- };
-
- axi at 18000000 {
-- #interrupt-cells = <1>;
-- interrupt-map-mask = <0x000fffff 0xffff>;
-- interrupt-map =
-- /* ChipCommon */
-- <0x00000000 0 &gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
--
-- /* Switch Register Access Block */
-- <0x00007000 0 &gic GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
-- <0x00007000 1 &gic GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
-- <0x00007000 2 &gic GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
-- <0x00007000 3 &gic GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
-- <0x00007000 4 &gic GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
-- <0x00007000 5 &gic GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
-- <0x00007000 6 &gic GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
-- <0x00007000 7 &gic GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
-- <0x00007000 8 &gic GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
-- <0x00007000 9 &gic GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
-- <0x00007000 10 &gic GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
-- <0x00007000 11 &gic GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
-- <0x00007000 12 &gic GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
--
-- /* PCIe Controller 0 */
-- <0x00012000 0 &gic GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
-- <0x00012000 1 &gic GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
-- <0x00012000 2 &gic GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
-- <0x00012000 3 &gic GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
-- <0x00012000 4 &gic GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
-- <0x00012000 5 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
--
-- /* PCIe Controller 1 */
-- <0x00013000 0 &gic GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
-- <0x00013000 1 &gic GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
-- <0x00013000 2 &gic GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
-- <0x00013000 3 &gic GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
-- <0x00013000 4 &gic GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
-- <0x00013000 5 &gic GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
--
-- /* PCIe Controller 2 */
-- <0x00014000 0 &gic GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
-- <0x00014000 1 &gic GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
-- <0x00014000 2 &gic GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
-- <0x00014000 3 &gic GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
-- <0x00014000 4 &gic GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-- <0x00014000 5 &gic GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
--
-- /* USB 2.0 Controller */
-- <0x00021000 0 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
--
-- /* USB 3.0 Controller */
-- <0x00023000 0 &gic GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
--
-- /* Ethernet Controller 0 */
-- <0x00024000 0 &gic GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
--
-- /* Ethernet Controller 1 */
-- <0x00025000 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
--
-- /* Ethernet Controller 2 */
-- <0x00026000 0 &gic GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
--
-- /* Ethernet Controller 3 */
-- <0x00027000 0 &gic GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
--
-- /* NAND Controller */
-- <0x00028000 0 &gic GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
-- <0x00028000 1 &gic GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
-- <0x00028000 2 &gic GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
-- <0x00028000 3 &gic GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
-- <0x00028000 4 &gic GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
-- <0x00028000 5 &gic GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
-- <0x00028000 6 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
-- <0x00028000 7 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
--
- pcie2: pcie at 14000 {
- reg = <0x00014000 0x1000>;
- };
diff --git a/target/linux/bcm53xx/patches-6.1/031-v6.5-0006-ARM-dts-BCM5301X-Specify-MAC-addresses-on-Luxul-devi.patch b/target/linux/bcm53xx/patches-6.1/031-v6.5-0006-ARM-dts-BCM5301X-Specify-MAC-addresses-on-Luxul-devi.patch
deleted file mode 100644
index 7d9b297191..0000000000
--- a/target/linux/bcm53xx/patches-6.1/031-v6.5-0006-ARM-dts-BCM5301X-Specify-MAC-addresses-on-Luxul-devi.patch
+++ /dev/null
@@ -1,336 +0,0 @@
-From dfa6570eb5ce2f24059caadbe2ed70034b5337bc Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal at milecki.pl>
-Date: Mon, 15 May 2023 10:33:08 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Specify MAC addresses on Luxul devices
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Use NRAM (NVMEM device) and its "et0macaddr" variable (NVMEM cell) to
-point Ethernet devices to their MAC addresses.
-
-Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
-Link: https://lore.kernel.org/r/20230515083308.7612-1-zajec5@gmail.com
-Signed-off-by: Florian Fainelli <florian.fainelli at broadcom.com>
----
- arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts | 13 +++++++++++++
- arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts | 13 +++++++++++++
- arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts | 13 +++++++++++++
- arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts | 11 +++++++++++
- arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts | 11 +++++++++++
- arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts | 13 +++++++++++++
- arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts | 11 +++++++++++
- arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts | 13 +++++++++++++
- arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts | 11 +++++++++++
- arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts | 5 ++++-
- 10 files changed, 113 insertions(+), 1 deletion(-)
-
---- a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
-+++ b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
-@@ -20,6 +20,14 @@
- reg = <0x00000000 0x08000000>;
- };
-
-+ nvram at 1eff0000 {
-+ compatible = "brcm,nvram";
-+ reg = <0x1eff0000 0x10000>;
-+
-+ et0macaddr: et0macaddr {
-+ };
-+ };
-+
- leds {
- compatible = "gpio-leds";
-
-@@ -53,6 +61,11 @@
- };
- };
-
-+&gmac0 {
-+ nvmem-cells = <&et0macaddr>;
-+ nvmem-cell-names = "mac-address";
-+};
-+
- &spi_nor {
- status = "okay";
- };
---- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
-+++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
-@@ -24,6 +24,14 @@
- reg = <0x00000000 0x08000000>;
- };
-
-+ nvram at 1eff0000 {
-+ compatible = "brcm,nvram";
-+ reg = <0x1eff0000 0x10000>;
-+
-+ et0macaddr: et0macaddr {
-+ };
-+ };
-+
- nand_controller: nand-controller at 18028000 {
- nand at 0 {
- partitions {
-@@ -60,6 +68,11 @@
- };
- };
-
-+&gmac0 {
-+ nvmem-cells = <&et0macaddr>;
-+ nvmem-cell-names = "mac-address";
-+};
-+
- &spi_nor {
- status = "okay";
- };
---- a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
-+++ b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
-@@ -20,6 +20,14 @@
- reg = <0x00000000 0x08000000>;
- };
-
-+ nvram at 1eff0000 {
-+ compatible = "brcm,nvram";
-+ reg = <0x1eff0000 0x10000>;
-+
-+ et0macaddr: et0macaddr {
-+ };
-+ };
-+
- leds {
- compatible = "gpio-leds";
-
-@@ -53,6 +61,11 @@
- };
- };
-
-+&gmac0 {
-+ nvmem-cells = <&et0macaddr>;
-+ nvmem-cell-names = "mac-address";
-+};
-+
- &spi_nor {
- status = "okay";
- };
---- a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
-+++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
-@@ -24,6 +24,10 @@
- nvram at 1eff0000 {
- compatible = "brcm,nvram";
- reg = <0x1eff0000 0x10000>;
-+
-+ et0macaddr: et0macaddr {
-+ #nvmem-cell-cells = <1>;
-+ };
- };
-
- leds {
-@@ -106,6 +110,11 @@
- vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
- };
-
-+&gmac0 {
-+ nvmem-cells = <&et0macaddr 0>;
-+ nvmem-cell-names = "mac-address";
-+};
-+
- &spi_nor {
- status = "okay";
- };
-@@ -137,6 +146,8 @@
- port at 4 {
- reg = <4>;
- label = "wan";
-+ nvmem-cells = <&et0macaddr 5>;
-+ nvmem-cell-names = "mac-address";
- };
-
- port at 5 {
---- a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
-@@ -25,6 +25,10 @@
- nvram at 1eff0000 {
- compatible = "brcm,nvram";
- reg = <0x1eff0000 0x10000>;
-+
-+ et0macaddr: et0macaddr {
-+ #nvmem-cell-cells = <1>;
-+ };
- };
-
- leds {
-@@ -61,6 +65,11 @@
- vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
- };
-
-+&gmac0 {
-+ nvmem-cells = <&et0macaddr 0>;
-+ nvmem-cell-names = "mac-address";
-+};
-+
- &spi_nor {
- status = "okay";
- };
-@@ -76,6 +85,8 @@
- port at 0 {
- reg = <0>;
- label = "wan";
-+ nvmem-cells = <&et0macaddr 1>;
-+ nvmem-cell-names = "mac-address";
- };
-
- port at 1 {
---- a/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts
-@@ -20,6 +20,14 @@
- reg = <0x00000000 0x08000000>;
- };
-
-+ nvram at 1eff0000 {
-+ compatible = "brcm,nvram";
-+ reg = <0x1eff0000 0x10000>;
-+
-+ et0macaddr: et0macaddr {
-+ };
-+ };
-+
- leds {
- compatible = "gpio-leds";
-
-@@ -51,6 +59,11 @@
- };
- };
-
-+&gmac0 {
-+ nvmem-cells = <&et0macaddr>;
-+ nvmem-cell-names = "mac-address";
-+};
-+
- &spi_nor {
- status = "okay";
- };
---- a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
-@@ -25,6 +25,10 @@
- nvram at 1eff0000 {
- compatible = "brcm,nvram";
- reg = <0x1eff0000 0x10000>;
-+
-+ et0macaddr: et0macaddr {
-+ #nvmem-cell-cells = <1>;
-+ };
- };
-
- leds {
-@@ -61,6 +65,11 @@
- vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
- };
-
-+&gmac0 {
-+ nvmem-cells = <&et0macaddr 0>;
-+ nvmem-cell-names = "mac-address";
-+};
-+
- &spi_nor {
- status = "okay";
- };
-@@ -76,6 +85,8 @@
- port at 0 {
- reg = <0>;
- label = "wan";
-+ nvmem-cells = <&et0macaddr 1>;
-+ nvmem-cell-names = "mac-address";
- };
-
- port at 1 {
---- a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
-@@ -22,6 +22,14 @@
- <0x88000000 0x18000000>;
- };
-
-+ nvram at 1eff0000 {
-+ compatible = "brcm,nvram";
-+ reg = <0x1eff0000 0x10000>;
-+
-+ et0macaddr: et0macaddr {
-+ };
-+ };
-+
- leds {
- compatible = "gpio-leds";
-
-@@ -47,6 +55,11 @@
- status = "okay";
- };
-
-+&gmac0 {
-+ nvmem-cells = <&et0macaddr>;
-+ nvmem-cell-names = "mac-address";
-+};
-+
- &spi_nor {
- status = "okay";
- };
---- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
-@@ -25,6 +25,10 @@
- nvram at 1eff0000 {
- compatible = "brcm,nvram";
- reg = <0x1eff0000 0x10000>;
-+
-+ et0macaddr: et0macaddr {
-+ #nvmem-cell-cells = <1>;
-+ };
- };
-
- leds {
-@@ -101,6 +105,11 @@
- vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
- };
-
-+&gmac0 {
-+ nvmem-cells = <&et0macaddr 0>;
-+ nvmem-cell-names = "mac-address";
-+};
-+
- &spi_nor {
- status = "okay";
- };
-@@ -136,6 +145,8 @@
- port at 4 {
- reg = <4>;
- label = "wan";
-+ nvmem-cells = <&et0macaddr 5>;
-+ nvmem-cell-names = "mac-address";
- };
-
- port at 5 {
---- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
-@@ -27,6 +27,7 @@
- reg = <0x1eff0000 0x10000>;
-
- et0macaddr: et0macaddr {
-+ #nvmem-cell-cells = <1>;
- };
- };
-
-@@ -76,7 +77,7 @@
- };
-
- &gmac0 {
-- nvmem-cells = <&et0macaddr>;
-+ nvmem-cells = <&et0macaddr 0>;
- nvmem-cell-names = "mac-address";
- };
-
-@@ -119,6 +120,8 @@
- port at 4 {
- reg = <4>;
- label = "wan";
-+ nvmem-cells = <&et0macaddr 5>;
-+ nvmem-cell-names = "mac-address";
- };
-
- port at 5 {
diff --git a/target/linux/bcm53xx/patches-6.1/031-v6.5-0007-ARM-dts-BCM5301X-Use-updated-device-compatible-strin.patch b/target/linux/bcm53xx/patches-6.1/031-v6.5-0007-ARM-dts-BCM5301X-Use-updated-device-compatible-strin.patch
deleted file mode 100644
index 5f5890e291..0000000000
--- a/target/linux/bcm53xx/patches-6.1/031-v6.5-0007-ARM-dts-BCM5301X-Use-updated-device-compatible-strin.patch
+++ /dev/null
@@ -1,90 +0,0 @@
-From 9d7121f1d2faa0b50bf5b462adcd2dd91970c45e Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal at milecki.pl>
-Date: Sat, 20 May 2023 13:26:01 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Use updated device "compatible" strings
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Northstar binding was updated to use minus/hyphen char between model and
-version for all devices.
-
-Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
-Reviewed-by: Linus Walleij <linus.walleij at linaro.org>
-Link: https://lore.kernel.org/r/20230520112601.11821-2-zajec5@gmail.com
-Signed-off-by: Florian Fainelli <florian.fainelli at broadcom.com>
----
- arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts | 2 +-
- arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 2 +-
- arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts | 2 +-
- arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts | 2 +-
- arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts | 2 +-
- arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts | 2 +-
- 6 files changed, 6 insertions(+), 6 deletions(-)
-
---- a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
-+++ b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
-@@ -8,7 +8,7 @@
- #include "bcm4708.dtsi"
-
- / {
-- compatible = "luxul,xap-1510v1", "brcm,bcm4708";
-+ compatible = "luxul,xap-1510-v1", "brcm,bcm4708";
- model = "Luxul XAP-1510 V1";
-
- chosen {
---- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-@@ -13,7 +13,7 @@
- #include "bcm5301x-nand-cs0-bch8.dtsi"
-
- / {
-- compatible = "netgear,r6250v1", "brcm,bcm4708";
-+ compatible = "netgear,r6250-v1", "brcm,bcm4708";
- model = "Netgear R6250 V1 (BCM4708)";
-
- chosen {
---- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
-+++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
-@@ -12,7 +12,7 @@
- #include "bcm5301x-nand-cs0-bch8.dtsi"
-
- / {
-- compatible = "netgear,r6300v2", "brcm,bcm4708";
-+ compatible = "netgear,r6300-v2", "brcm,bcm4708";
- model = "Netgear R6300 V2 (BCM4708)";
-
- chosen {
---- a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
-+++ b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
-@@ -8,7 +8,7 @@
- #include "bcm47081.dtsi"
-
- / {
-- compatible = "luxul,xap-1410v1", "brcm,bcm47081", "brcm,bcm4708";
-+ compatible = "luxul,xap-1410-v1", "brcm,bcm47081", "brcm,bcm4708";
- model = "Luxul XAP-1410 V1";
-
- chosen {
---- a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
-+++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
-@@ -9,7 +9,7 @@
- #include "bcm5301x-nand-cs0-bch4.dtsi"
-
- / {
-- compatible = "luxul,xwr-1200v1", "brcm,bcm47081", "brcm,bcm4708";
-+ compatible = "luxul,xwr-1200-v1", "brcm,bcm47081", "brcm,bcm4708";
- model = "Luxul XWR-1200 V1";
-
- chosen {
---- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
-@@ -9,7 +9,7 @@
- #include "bcm5301x-nand-cs0-bch4.dtsi"
-
- / {
-- compatible = "luxul,xwr-3100v1", "brcm,bcm47094", "brcm,bcm4708";
-+ compatible = "luxul,xwr-3100-v1", "brcm,bcm47094", "brcm,bcm4708";
- model = "Luxul XWR-3100 V1";
-
- chosen {
diff --git a/target/linux/bcm53xx/patches-6.1/031-v6.5-0008-ARM-dts-BCM5301X-Use-updated-spi-gpio-binding-proper.patch b/target/linux/bcm53xx/patches-6.1/031-v6.5-0008-ARM-dts-BCM5301X-Use-updated-spi-gpio-binding-proper.patch
deleted file mode 100644
index c16587f684..0000000000
--- a/target/linux/bcm53xx/patches-6.1/031-v6.5-0008-ARM-dts-BCM5301X-Use-updated-spi-gpio-binding-proper.patch
+++ /dev/null
@@ -1,82 +0,0 @@
-From 04afb51c1dce90051487d3c7b70a1b1b246ce29a Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal at milecki.pl>
-Date: Fri, 2 Jun 2023 17:10:23 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Use updated "spi-gpio" binding properties
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Switch away from deprecated properties.
-
-This fixes:
-arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dtb: spi: gpio-sck: False schema does not allow [[6, 7, 0]]
- From schema: Documentation/devicetree/bindings/spi/spi-gpio.yaml
-arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dtb: spi: gpio-mosi: False schema does not allow [[6, 4, 0]]
- From schema: Documentation/devicetree/bindings/spi/spi-gpio.yaml
-arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dtb: spi: 'sck-gpios' is a required property
- From schema: Documentation/devicetree/bindings/spi/spi-gpio.yaml
-arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dtb: spi: Unevaluated properties are not allowed ('gpio-mosi', 'gpio-sck' were unexpected)
- From schema: Documentation/devicetree/bindings/spi/spi-gpio.yaml
-
-Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
-Link: https://lore.kernel.org/r/20230602151023.8607-1-zajec5@gmail.com
-Signed-off-by: Florian Fainelli <florian.fainelli at broadcom.com>
----
- arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi | 4 ++--
- arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts | 4 ++--
- arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts | 4 ++--
- arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts | 4 ++--
- 4 files changed, 8 insertions(+), 8 deletions(-)
-
---- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi
-+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi
-@@ -16,8 +16,8 @@
- spi {
- compatible = "spi-gpio";
- num-chipselects = <1>;
-- gpio-sck = <&chipcommon 7 0>;
-- gpio-mosi = <&chipcommon 4 0>;
-+ sck-gpios = <&chipcommon 7 0>;
-+ mosi-gpios = <&chipcommon 4 0>;
- cs-gpios = <&chipcommon 6 0>;
- #address-cells = <1>;
- #size-cells = <0>;
---- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-@@ -28,8 +28,8 @@
- spi {
- compatible = "spi-gpio";
- num-chipselects = <1>;
-- gpio-sck = <&chipcommon 7 0>;
-- gpio-mosi = <&chipcommon 4 0>;
-+ sck-gpios = <&chipcommon 7 0>;
-+ mosi-gpios = <&chipcommon 4 0>;
- cs-gpios = <&chipcommon 6 0>;
- #address-cells = <1>;
- #size-cells = <0>;
---- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
-+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
-@@ -28,8 +28,8 @@
- spi {
- compatible = "spi-gpio";
- num-chipselects = <1>;
-- gpio-sck = <&chipcommon 7 0>;
-- gpio-mosi = <&chipcommon 4 0>;
-+ sck-gpios = <&chipcommon 7 0>;
-+ mosi-gpios = <&chipcommon 4 0>;
- cs-gpios = <&chipcommon 6 0>;
- #address-cells = <1>;
- #size-cells = <0>;
---- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
-+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
-@@ -28,8 +28,8 @@
- spi {
- compatible = "spi-gpio";
- num-chipselects = <1>;
-- gpio-sck = <&chipcommon 7 0>;
-- gpio-mosi = <&chipcommon 4 0>;
-+ sck-gpios = <&chipcommon 7 0>;
-+ mosi-gpios = <&chipcommon 4 0>;
- cs-gpios = <&chipcommon 6 0>;
- #address-cells = <1>;
- #size-cells = <0>;
diff --git a/target/linux/bcm53xx/patches-6.1/031-v6.5-0009-ARM-dts-BCM5301X-Drop-invalid-usb-cells.patch b/target/linux/bcm53xx/patches-6.1/031-v6.5-0009-ARM-dts-BCM5301X-Drop-invalid-usb-cells.patch
deleted file mode 100644
index 59fa457aee..0000000000
--- a/target/linux/bcm53xx/patches-6.1/031-v6.5-0009-ARM-dts-BCM5301X-Drop-invalid-usb-cells.patch
+++ /dev/null
@@ -1,54 +0,0 @@
-From c3acdd4901192bc69dc577012663d5abae21661e Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal at milecki.pl>
-Date: Fri, 2 Jun 2023 15:34:54 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Drop invalid #usb-cells
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Such property simply doesn't exist (is not documented or used anywhere).
-
-This fixes:
-arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: usb at 21000: Unevaluated properties are not allowed ('#usb-cells' was unexpected)
- From schema: Documentation/devicetree/bindings/usb/generic-ehci.yaml
-arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: usb at 22000: Unevaluated properties are not allowed ('#usb-cells' was unexpected)
- From schema: Documentation/devicetree/bindings/usb/generic-ohci.yaml
-arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: usb at 23000: Unevaluated properties are not allowed ('#usb-cells' was unexpected)
- From schema: Documentation/devicetree/bindings/usb/generic-xhci.yaml
-
-Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
-Link: https://lore.kernel.org/r/20230602133455.7441-1-zajec5@gmail.com
-Signed-off-by: Florian Fainelli <florian.fainelli at broadcom.com>
----
- arch/arm/boot/dts/bcm-ns.dtsi | 6 ------
- 1 file changed, 6 deletions(-)
-
---- a/arch/arm/boot/dts/bcm-ns.dtsi
-+++ b/arch/arm/boot/dts/bcm-ns.dtsi
-@@ -192,8 +192,6 @@
- interrupt-parent = <&gic>;
-
- ehci: usb at 21000 {
-- #usb-cells = <0>;
--
- compatible = "generic-ehci";
- reg = <0x00021000 0x1000>;
- interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
-@@ -214,8 +212,6 @@
- };
-
- ohci: usb at 22000 {
-- #usb-cells = <0>;
--
- compatible = "generic-ohci";
- reg = <0x00022000 0x1000>;
- interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
-@@ -245,8 +241,6 @@
- interrupt-parent = <&gic>;
-
- xhci: usb at 23000 {
-- #usb-cells = <0>;
--
- compatible = "generic-xhci";
- reg = <0x00023000 0x1000>;
- interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/target/linux/bcm53xx/patches-6.1/031-v6.5-0010-ARM-dts-BCM5301X-Drop-invalid-properties-from-Meraki.patch b/target/linux/bcm53xx/patches-6.1/031-v6.5-0010-ARM-dts-BCM5301X-Drop-invalid-properties-from-Meraki.patch
deleted file mode 100644
index b8411fc719..0000000000
--- a/target/linux/bcm53xx/patches-6.1/031-v6.5-0010-ARM-dts-BCM5301X-Drop-invalid-properties-from-Meraki.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From 676bf7d062c14191c3fc12f1e36e1f3809041483 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal at milecki.pl>
-Date: Fri, 2 Jun 2023 15:34:55 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Drop invalid properties from Meraki MR32
- keys
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This fixes:
-arch/arm/boot/dts/bcm53015-meraki-mr26.dtb: keys: '#address-cells', '#size-cells' do not match any of the regexes: '^(button|event|key|switch|(button|event|key|switch)-[a-z0-9-]+|[a-z0-9-]+-(button|event|key|switch))$', 'pinctrl-[0-9]+'
- From schema: Documentation/devicetree/bindings/input/gpio-keys.yaml
-
-Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
-Link: https://lore.kernel.org/r/20230602133455.7441-2-zajec5@gmail.com
-Signed-off-by: Florian Fainelli <florian.fainelli at broadcom.com>
----
- arch/arm/boot/dts/bcm53015-meraki-mr26.dts | 2 --
- 1 file changed, 2 deletions(-)
-
---- a/arch/arm/boot/dts/bcm53015-meraki-mr26.dts
-+++ b/arch/arm/boot/dts/bcm53015-meraki-mr26.dts
-@@ -39,8 +39,6 @@
-
- keys {
- compatible = "gpio-keys";
-- #address-cells = <1>;
-- #size-cells = <0>;
-
- key-restart {
- label = "Reset";
diff --git a/target/linux/bcm53xx/patches-6.1/031-v6.5-0011-ARM-dts-BCM5301X-Relicense-Christian-s-code-to-the-G.patch b/target/linux/bcm53xx/patches-6.1/031-v6.5-0011-ARM-dts-BCM5301X-Relicense-Christian-s-code-to-the-G.patch
deleted file mode 100644
index 7496321269..0000000000
--- a/target/linux/bcm53xx/patches-6.1/031-v6.5-0011-ARM-dts-BCM5301X-Relicense-Christian-s-code-to-the-G.patch
+++ /dev/null
@@ -1,106 +0,0 @@
-From 1d5682ccc7d6088179b6cfd50a3e3bb6d2b0527e Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal at milecki.pl>
-Date: Mon, 5 Jun 2023 08:10:49 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Relicense Christian's code to the GPL
- 2.0+ / MIT
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Move code added by Christian to the bcm-ns.dtsi which uses dual
-licensing. That syncs more Northstar code to be based on the same
-licensing schema.
-
-Cc: Christian Lamparter <chunkeey at gmail.com>
-Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
-Acked-by: Christian Lamparter <chunkeey at gmail.com>
-Link: https://lore.kernel.org/r/20230605061049.16136-1-zajec5@gmail.com
-Signed-off-by: Florian Fainelli <florian.fainelli at broadcom.com>
----
- arch/arm/boot/dts/bcm-ns.dtsi | 21 +++++++++++++++++++++
- arch/arm/boot/dts/bcm5301x.dtsi | 23 -----------------------
- 2 files changed, 21 insertions(+), 23 deletions(-)
-
---- a/arch/arm/boot/dts/bcm-ns.dtsi
-+++ b/arch/arm/boot/dts/bcm-ns.dtsi
-@@ -182,6 +182,10 @@
- reg = <0x00013000 0x1000>;
- };
-
-+ pcie2: pcie at 14000 {
-+ reg = <0x00014000 0x1000>;
-+ };
-+
- usb2: usb2 at 21000 {
- reg = <0x00021000 0x1000>;
-
-@@ -274,6 +278,14 @@
- };
- };
-
-+ pwm: pwm at 18002000 {
-+ compatible = "brcm,iproc-pwm";
-+ reg = <0x18002000 0x28>;
-+ clocks = <&osc>;
-+ #pwm-cells = <3>;
-+ status = "disabled";
-+ };
-+
- mdio: mdio at 18003000 {
- compatible = "brcm,iproc-mdio";
- reg = <0x18003000 0x8>;
-@@ -299,6 +311,15 @@
- };
- };
-
-+ uart2: serial at 18008000 {
-+ compatible = "ns16550a";
-+ reg = <0x18008000 0x20>;
-+ clocks = <&iprocslow>;
-+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-+ reg-shift = <2>;
-+ status = "disabled";
-+ };
-+
- dmu-bus at 1800c000 {
- compatible = "simple-bus";
- ranges = <0 0x1800c000 0x1000>;
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -69,20 +69,6 @@
- };
- };
-
-- axi at 18000000 {
-- pcie2: pcie at 14000 {
-- reg = <0x00014000 0x1000>;
-- };
-- };
--
-- pwm: pwm at 18002000 {
-- compatible = "brcm,iproc-pwm";
-- reg = <0x18002000 0x28>;
-- clocks = <&osc>;
-- #pwm-cells = <3>;
-- status = "disabled";
-- };
--
- mdio-mux at 18003000 {
- compatible = "mdio-mux-mmioreg", "mdio-mux";
- mdio-parent-bus = <&mdio>;
-@@ -110,15 +96,6 @@
- reg = <0x18105000 0x1000>;
- };
-
-- uart2: serial at 18008000 {
-- compatible = "ns16550a";
-- reg = <0x18008000 0x20>;
-- clocks = <&iprocslow>;
-- interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-- reg-shift = <2>;
-- status = "disabled";
-- };
--
- i2c0: i2c at 18009000 {
- compatible = "brcm,iproc-i2c";
- reg = <0x18009000 0x50>;
diff --git a/target/linux/bcm53xx/patches-6.1/031-v6.5-0012-ARM-dts-BCM5301X-Describe-switch-ports-in-the-main-D.patch b/target/linux/bcm53xx/patches-6.1/031-v6.5-0012-ARM-dts-BCM5301X-Describe-switch-ports-in-the-main-D.patch
deleted file mode 100644
index fa2f21af53..0000000000
--- a/target/linux/bcm53xx/patches-6.1/031-v6.5-0012-ARM-dts-BCM5301X-Describe-switch-ports-in-the-main-D.patch
+++ /dev/null
@@ -1,838 +0,0 @@
-From ba4aebce23b2affb810b8a60eae853674d2cded2 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal at milecki.pl>
-Date: Mon, 5 Jun 2023 15:21:09 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Describe switch ports in the main DTS
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-All Northstar SoCs have BCM5301x switches (BCM53011, BCM53012) with 8
-ports (0-8 without 6). By design 3 switch ports (5, 7 and 8) are
-hardwired to 3 on-SoC Ethernet interfaces. Switch port 8 requires
-forcing link state.
-
-It seems that global Northstar .dtsi file is the best place to describe
-those hw details. Only device specific bits (like labels) should go to
-device .dts files.
-
-This seems to fit well with a tiny exception of Asus RT-AC88U which
-somehow was designed to have switch 5 connected to an extra switch. This
-case was simply handled with a /delete-property/.
-
-Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
-Reviewed-by: Christian Lamparter <chunkeey at gmail.com> (MR32+MR26)
-Link: https://lore.kernel.org/r/20230605132109.7933-1-zajec5@gmail.com
-Signed-off-by: Florian Fainelli <florian.fainelli at broadcom.com>
----
- arch/arm/boot/dts/bcm-ns.dtsi | 41 ++++++++++++++++++-
- .../bcm4708-buffalo-wzr-1166dhp-common.dtsi | 7 ----
- arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts | 4 --
- arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts | 3 --
- arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 7 ----
- arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts | 7 ----
- .../boot/dts/bcm47081-buffalo-wzr-600dhp2.dts | 7 ----
- arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts | 3 --
- arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts | 7 ----
- arch/arm/boot/dts/bcm4709-netgear-r8000.dts | 12 ------
- arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts | 17 +-------
- arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 12 ------
- arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts | 12 ------
- .../boot/dts/bcm47094-linksys-panamera.dts | 34 ++++-----------
- arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts | 7 ----
- arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts | 4 --
- arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts | 7 ----
- arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts | 3 --
- arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts | 7 ----
- .../boot/dts/bcm47094-luxul-xwr-3150-v1.dts | 7 ----
- arch/arm/boot/dts/bcm53015-meraki-mr26.dts | 3 --
- arch/arm/boot/dts/bcm53016-meraki-mr32.dts | 3 --
- 22 files changed, 51 insertions(+), 163 deletions(-)
-
---- a/arch/arm/boot/dts/bcm-ns.dtsi
-+++ b/arch/arm/boot/dts/bcm-ns.dtsi
-@@ -304,10 +304,49 @@
-
- status = "disabled";
-
-- /* ports are defined in board DTS */
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-+
-+ port at 0 {
-+ reg = <0>;
-+ };
-+
-+ port at 1 {
-+ reg = <1>;
-+ };
-+
-+ port at 2 {
-+ reg = <2>;
-+ };
-+
-+ port at 3 {
-+ reg = <3>;
-+ };
-+
-+ port at 4 {
-+ reg = <4>;
-+ };
-+
-+ port at 5 {
-+ reg = <5>;
-+ ethernet = <&gmac0>;
-+ };
-+
-+ port at 7 {
-+ reg = <7>;
-+ ethernet = <&gmac1>;
-+ };
-+
-+ port at 8 {
-+ reg = <8>;
-+ ethernet = <&gmac2>;
-+
-+ fixed-link {
-+ speed = <1000>;
-+ full-duplex;
-+ };
-+ };
- };
- };
-
---- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi
-+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi
-@@ -159,34 +159,27 @@
-
- ports {
- port at 0 {
-- reg = <0>;
- label = "lan1";
- };
-
- port at 1 {
-- reg = <1>;
- label = "lan2";
- };
-
- port at 2 {
-- reg = <2>;
- label = "lan3";
- };
-
- port at 3 {
-- reg = <3>;
- label = "lan4";
- };
-
- port at 4 {
-- reg = <4>;
- label = "wan";
- };
-
- port at 5 {
-- reg = <5>;
- label = "cpu";
-- ethernet = <&gmac0>;
- };
- };
- };
---- a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
-+++ b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
-@@ -75,19 +75,15 @@
-
- ports {
- port at 0 {
-- reg = <0>;
- label = "poe";
- };
-
- port at 4 {
-- reg = <4>;
- label = "lan";
- };
-
- port at 5 {
-- reg = <5>;
- label = "cpu";
-- ethernet = <&gmac0>;
- };
- };
- };
---- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
-+++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
-@@ -82,14 +82,11 @@
-
- ports {
- port at 4 {
-- reg = <4>;
- label = "lan";
- };
-
- port at 5 {
-- reg = <5>;
- label = "cpu";
-- ethernet = <&gmac0>;
- };
- };
- };
---- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-@@ -100,34 +100,27 @@
-
- ports {
- port at 0 {
-- reg = <0>;
- label = "lan4";
- };
-
- port at 1 {
-- reg = <1>;
- label = "lan3";
- };
-
- port at 2 {
-- reg = <2>;
- label = "lan2";
- };
-
- port at 3 {
-- reg = <3>;
- label = "lan1";
- };
-
- port at 4 {
-- reg = <4>;
- label = "wan";
- };
-
- port at 5 {
-- reg = <5>;
- label = "cpu";
-- ethernet = <&gmac0>;
- };
- };
- };
---- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
-+++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
-@@ -123,34 +123,27 @@
-
- ports {
- port at 0 {
-- reg = <0>;
- label = "lan4";
- };
-
- port at 1 {
-- reg = <1>;
- label = "lan3";
- };
-
- port at 2 {
-- reg = <2>;
- label = "lan2";
- };
-
- port at 3 {
-- reg = <3>;
- label = "lan1";
- };
-
- port at 4 {
-- reg = <4>;
- label = "wan";
- };
-
- port at 5 {
-- reg = <5>;
- label = "cpu";
-- ethernet = <&gmac0>;
- };
- };
- };
---- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
-+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
-@@ -123,34 +123,27 @@
-
- ports {
- port at 0 {
-- reg = <0>;
- label = "lan1";
- };
-
- port at 1 {
-- reg = <1>;
- label = "lan2";
- };
-
- port at 2 {
-- reg = <2>;
- label = "lan3";
- };
-
- port at 3 {
-- reg = <3>;
- label = "lan4";
- };
-
- port at 4 {
-- reg = <4>;
- label = "wan";
- };
-
- port at 5 {
-- reg = <5>;
- label = "cpu";
-- ethernet = <&gmac0>;
- };
- };
- };
---- a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
-+++ b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
-@@ -75,14 +75,11 @@
-
- ports {
- port at 4 {
-- reg = <4>;
- label = "poe";
- };
-
- port at 5 {
-- reg = <5>;
- label = "cpu";
-- ethernet = <&gmac0>;
- };
- };
- };
---- a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
-+++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
-@@ -124,36 +124,29 @@
-
- ports {
- port at 0 {
-- reg = <0>;
- label = "lan4";
- };
-
- port at 1 {
-- reg = <1>;
- label = "lan3";
- };
-
- port at 2 {
-- reg = <2>;
- label = "lan2";
- };
-
- port at 3 {
-- reg = <3>;
- label = "lan1";
- };
-
- port at 4 {
-- reg = <4>;
- label = "wan";
- nvmem-cells = <&et0macaddr 5>;
- nvmem-cell-names = "mac-address";
- };
-
- port at 5 {
-- reg = <5>;
- label = "cpu";
-- ethernet = <&gmac0>;
- };
- };
- };
---- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-@@ -191,39 +191,27 @@
-
- ports {
- port at 0 {
-- reg = <0>;
- label = "lan1";
- };
-
- port at 1 {
-- reg = <1>;
- label = "lan2";
- };
-
- port at 2 {
-- reg = <2>;
- label = "lan3";
- };
-
- port at 3 {
-- reg = <3>;
- label = "lan4";
- };
-
- port at 4 {
-- reg = <4>;
- label = "wan";
- };
-
- port at 8 {
-- reg = <8>;
- label = "cpu";
-- ethernet = <&gmac2>;
--
-- fixed-link {
-- speed = <1000>;
-- full-duplex;
-- };
- };
- };
- };
---- a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
-+++ b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
-@@ -181,32 +181,28 @@
-
- ports {
- port at 0 {
-- reg = <0>;
- label = "lan4";
- };
-
- port at 1 {
-- reg = <1>;
- label = "lan3";
- };
-
- port at 2 {
-- reg = <2>;
- label = "lan2";
- };
-
- port at 3 {
-- reg = <3>;
- label = "lan1";
- };
-
- port at 4 {
-- reg = <4>;
- label = "wan";
- };
-
- sw0_p5: port at 5 {
-- reg = <5>;
-+ /delete-property/ethernet;
-+
- label = "extsw";
- phy-mode = "rgmii";
-
-@@ -218,8 +214,6 @@
- };
-
- port at 7 {
-- reg = <7>;
-- ethernet = <&gmac1>;
- label = "cpu";
-
- fixed-link {
-@@ -229,14 +223,7 @@
- };
-
- port at 8 {
-- reg = <8>;
-- ethernet = <&gmac2>;
- label = "cpu";
--
-- fixed-link {
-- speed = <1000>;
-- full-duplex;
-- };
- };
- };
- };
---- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
-+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
-@@ -124,39 +124,27 @@
-
- ports {
- port at 0 {
-- reg = <0>;
- label = "lan4";
- };
-
- port at 1 {
-- reg = <1>;
- label = "lan3";
- };
-
- port at 2 {
-- reg = <2>;
- label = "lan2";
- };
-
- port at 3 {
-- reg = <3>;
- label = "lan1";
- };
-
- port at 4 {
-- reg = <4>;
- label = "wan";
- };
-
- port at 8 {
-- reg = <8>;
- label = "cpu";
-- ethernet = <&gmac2>;
--
-- fixed-link {
-- speed = <1000>;
-- full-duplex;
-- };
- };
- };
- };
---- a/arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts
-+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts
-@@ -172,40 +172,28 @@
-
- ports {
- port at 0 {
-- reg = <0>;
- label = "lan1";
- };
-
- port at 1 {
-- reg = <1>;
- label = "lan2";
- };
-
- port at 2 {
-- reg = <2>;
- label = "lan3";
- };
-
- port at 3 {
-- reg = <3>;
- label = "lan4";
- };
-
- port at 4 {
-- reg = <4>;
- label = "wan";
- };
-
- port at 8 {
-- reg = <8>;
- label = "cpu";
-- ethernet = <&gmac2>;
- phy-mode = "rgmii";
--
-- fixed-link {
-- speed = <1000>;
-- full-duplex;
-- };
- };
- };
- };
---- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
-+++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
-@@ -207,29 +207,32 @@
- dsa,member = <0 0>;
-
- ports {
-+ sw0_p0: port at 0 {
-+ label = "extsw";
-+
-+ fixed-link {
-+ speed = <1000>;
-+ full-duplex;
-+ };
-+ };
-+
- port at 1 {
-- reg = <1>;
- label = "lan7";
- };
-
- port at 2 {
-- reg = <2>;
- label = "lan4";
- };
-
- port at 3 {
-- reg = <3>;
- label = "lan8";
- };
-
- port at 4 {
-- reg = <4>;
- label = "wan";
- };
-
- port at 5 {
-- reg = <5>;
-- ethernet = <&gmac0>;
- label = "cpu";
- status = "disabled";
-
-@@ -240,8 +243,6 @@
- };
-
- port at 7 {
-- reg = <7>;
-- ethernet = <&gmac1>;
- label = "cpu";
- status = "disabled";
-
-@@ -252,24 +253,7 @@
- };
-
- port at 8 {
-- reg = <8>;
-- ethernet = <&gmac2>;
- label = "cpu";
--
-- fixed-link {
-- speed = <1000>;
-- full-duplex;
-- };
-- };
--
-- sw0_p0: port at 0 {
-- reg = <0>;
-- label = "extsw";
--
-- fixed-link {
-- speed = <1000>;
-- full-duplex;
-- };
- };
- };
- };
---- a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
-@@ -83,36 +83,29 @@
-
- ports {
- port at 0 {
-- reg = <0>;
- label = "wan";
- nvmem-cells = <&et0macaddr 1>;
- nvmem-cell-names = "mac-address";
- };
-
- port at 1 {
-- reg = <1>;
- label = "lan4";
- };
-
- port at 2 {
-- reg = <2>;
- label = "lan3";
- };
-
- port at 3 {
-- reg = <3>;
- label = "lan2";
- };
-
- port at 4 {
-- reg = <4>;
- label = "lan1";
- };
-
- port at 5 {
-- reg = <5>;
- label = "cpu";
-- ethernet = <&gmac0>;
- };
- };
- };
---- a/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts
-@@ -73,19 +73,15 @@
-
- ports {
- port at 0 {
-- reg = <0>;
- label = "poe";
- };
-
- port at 1 {
-- reg = <1>;
- label = "lan";
- };
-
- port at 5 {
-- reg = <5>;
- label = "cpu";
-- ethernet = <&gmac0>;
- };
- };
- };
---- a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
-@@ -83,36 +83,29 @@
-
- ports {
- port at 0 {
-- reg = <0>;
- label = "wan";
- nvmem-cells = <&et0macaddr 1>;
- nvmem-cell-names = "mac-address";
- };
-
- port at 1 {
-- reg = <1>;
- label = "lan4";
- };
-
- port at 2 {
-- reg = <2>;
- label = "lan3";
- };
-
- port at 3 {
-- reg = <3>;
- label = "lan2";
- };
-
- port at 4 {
-- reg = <4>;
- label = "lan1";
- };
-
- port at 5 {
-- reg = <5>;
- label = "cpu";
-- ethernet = <&gmac0>;
- };
- };
- };
---- a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
-@@ -69,14 +69,11 @@
-
- ports {
- port at 0 {
-- reg = <0>;
- label = "lan";
- };
-
- port at 5 {
-- reg = <5>;
- label = "cpu";
-- ethernet = <&gmac0>;
- };
- };
- };
---- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
-@@ -123,36 +123,29 @@
-
- ports {
- port at 0 {
-- reg = <0>;
- label = "lan4";
- };
-
- port at 1 {
-- reg = <1>;
- label = "lan3";
- };
-
- port at 2 {
-- reg = <2>;
- label = "lan2";
- };
-
- port at 3 {
-- reg = <3>;
- label = "lan1";
- };
-
- port at 4 {
-- reg = <4>;
- label = "wan";
- nvmem-cells = <&et0macaddr 5>;
- nvmem-cell-names = "mac-address";
- };
-
- port at 5 {
-- reg = <5>;
- label = "cpu";
-- ethernet = <&gmac0>;
- };
- };
- };
---- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
-@@ -98,36 +98,29 @@
-
- ports {
- port at 0 {
-- reg = <0>;
- label = "lan4";
- };
-
- port at 1 {
-- reg = <1>;
- label = "lan3";
- };
-
- port at 2 {
-- reg = <2>;
- label = "lan2";
- };
-
- port at 3 {
-- reg = <3>;
- label = "lan1";
- };
-
- port at 4 {
-- reg = <4>;
- label = "wan";
- nvmem-cells = <&et0macaddr 5>;
- nvmem-cell-names = "mac-address";
- };
-
- port at 5 {
-- reg = <5>;
- label = "cpu";
-- ethernet = <&gmac0>;
- };
- };
- };
---- a/arch/arm/boot/dts/bcm53015-meraki-mr26.dts
-+++ b/arch/arm/boot/dts/bcm53015-meraki-mr26.dts
-@@ -115,14 +115,11 @@
-
- ports {
- port at 0 {
-- reg = <0>;
- label = "poe";
- };
-
- port at 5 {
-- reg = <5>;
- label = "cpu";
-- ethernet = <&gmac0>;
-
- fixed-link {
- speed = <1000>;
---- a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
-+++ b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
-@@ -176,14 +176,11 @@
-
- ports {
- port at 0 {
-- reg = <0>;
- label = "poe";
- };
-
- port at 5 {
-- reg = <5>;
- label = "cpu";
-- ethernet = <&gmac0>;
-
- fixed-link {
- speed = <1000>;
diff --git a/target/linux/bcm53xx/patches-6.1/031-v6.5-0013-ARM-dts-BCM5301X-MR26-MR32-remove-bogus-nand-ecc-alg.patch b/target/linux/bcm53xx/patches-6.1/031-v6.5-0013-ARM-dts-BCM5301X-MR26-MR32-remove-bogus-nand-ecc-alg.patch
deleted file mode 100644
index ea571f459a..0000000000
--- a/target/linux/bcm53xx/patches-6.1/031-v6.5-0013-ARM-dts-BCM5301X-MR26-MR32-remove-bogus-nand-ecc-alg.patch
+++ /dev/null
@@ -1,63 +0,0 @@
-From a6a1a156f5debaebf9f61850d111b966e9be9ee9 Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey at gmail.com>
-Date: Thu, 8 Jun 2023 17:36:27 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: MR26: MR32: remove bogus nand-ecc-algo
- property
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-| bcm53015-meraki-mr26.dtb: nand-controller at 18028000:
-| nand at 0:nand-ecc-algo:0: 'hw' is not one of ['hamming', 'bch', 'rs']
-| From schema: Documentation/[...]/nand-controller.yaml
-| bcm53016-meraki-mr32.dtb: nand-controller at 18028000:
-| nand at 0:nand-ecc-algo:0: 'hw' is not one of ['hamming', 'bch', 'rs']
-| From schema: Documentation/[...]/nand-controller.yaml
-
-original ECC values for these old Merakis are sadly not
-provided by the vendor. It looks like Meraki just stuck
-with what Broadcom's SDK was doing... which left this
-up to the proprietary nand driver.
-
-Note: The invalid setting was and is handled by brcmnand. It
-falls back to "bch" in brcmnand_setup_dev() when ecc.algo is
-set to NAND_ECC_ALGO_UNKNOWN (since "hw" is not in the list
-above).
-
-A correct nand-ecc-algo = "bch"; is already specified in the
-included "bcm5301x-nand-cs0-bch8.dtsi". So this line can be
-dropped.
-
-Reported-by: Rafał Miłecki <zajec5 at gmail.com> (per Mail)
-Fixes: 935327a73553 ("ARM: dts: BCM5301X: Add DT for Meraki MR26")
-Fixes: ec88a9c344d9 ("ARM: BCM5301X: Add DT for Meraki MR32")
-Signed-off-by: Christian Lamparter <chunkeey at gmail.com>
-Link: https://lore.kernel.org/r/2c4d00dd40124c2ddc0b139cbce7531b108f9052.1686238550.git.chunkeey@gmail.com
-Signed-off-by: Florian Fainelli <florian.fainelli at broadcom.com>
----
- arch/arm/boot/dts/bcm53015-meraki-mr26.dts | 2 --
- arch/arm/boot/dts/bcm53016-meraki-mr32.dts | 2 --
- 2 files changed, 4 deletions(-)
-
---- a/arch/arm/boot/dts/bcm53015-meraki-mr26.dts
-+++ b/arch/arm/boot/dts/bcm53015-meraki-mr26.dts
-@@ -72,8 +72,6 @@
- };
-
- &nandcs {
-- nand-ecc-algo = "hw";
--
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <0x1>;
---- a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
-+++ b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
-@@ -125,8 +125,6 @@
- };
-
- &nandcs {
-- nand-ecc-algo = "hw";
--
- partitions {
- /*
- * The partition autodetection does not work for this device.
diff --git a/target/linux/bcm53xx/patches-6.1/031-v6.5-0014-ARM-dts-BCM5301X-MR32-remove-partition-index-numbers.patch b/target/linux/bcm53xx/patches-6.1/031-v6.5-0014-ARM-dts-BCM5301X-MR32-remove-partition-index-numbers.patch
deleted file mode 100644
index 8eb5442d17..0000000000
--- a/target/linux/bcm53xx/patches-6.1/031-v6.5-0014-ARM-dts-BCM5301X-MR32-remove-partition-index-numbers.patch
+++ /dev/null
@@ -1,54 +0,0 @@
-From d68b2f7d7d06872450d4f39d84d5926d7e7ae88c Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey at gmail.com>
-Date: Thu, 8 Jun 2023 17:36:28 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: MR32: remove partition index numbers
-
-removes the partition indexes in the node names under.
-This brings the device tree source in line with others.
-
-Signed-off-by: Christian Lamparter <chunkeey at gmail.com>
-Link: https://lore.kernel.org/r/627f57d568030a56499361790524b4d4f3381619.1686238550.git.chunkeey@gmail.com
-Signed-off-by: Florian Fainelli <florian.fainelli at broadcom.com>
----
- arch/arm/boot/dts/bcm53016-meraki-mr32.dts | 10 +++++-----
- 1 file changed, 5 insertions(+), 5 deletions(-)
-
---- a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
-+++ b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
-@@ -138,31 +138,31 @@
- #address-cells = <0x1>;
- #size-cells = <0x1>;
-
-- partition0 at 0 {
-+ partition at 0 {
- label = "u-boot";
- reg = <0x0 0x100000>;
- read-only;
- };
-
-- partition1 at 100000 {
-+ partition at 100000 {
- label = "bootkernel1";
- reg = <0x100000 0x300000>;
- read-only;
- };
-
-- partition2 at 400000 {
-+ partition at 400000 {
- label = "nvram";
- reg = <0x400000 0x100000>;
- read-only;
- };
-
-- partition3 at 500000 {
-+ partition at 500000 {
- label = "bootkernel2";
- reg = <0x500000 0x300000>;
- read-only;
- };
-
-- partition4 at 800000 {
-+ partition at 800000 {
- label = "ubi";
- reg = <0x800000 0x7780000>;
- };
diff --git a/target/linux/bcm53xx/patches-6.1/031-v6.5-0016-ARM-dts-BCM5301X-Add-Netgear-R8000-WiFi-regulator-ma.patch b/target/linux/bcm53xx/patches-6.1/031-v6.5-0016-ARM-dts-BCM5301X-Add-Netgear-R8000-WiFi-regulator-ma.patch
deleted file mode 100644
index 3ffe0b2f17..0000000000
--- a/target/linux/bcm53xx/patches-6.1/031-v6.5-0016-ARM-dts-BCM5301X-Add-Netgear-R8000-WiFi-regulator-ma.patch
+++ /dev/null
@@ -1,61 +0,0 @@
-From 752a63b8dbe6cc6900efd1035bea427a778a4b55 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal at milecki.pl>
-Date: Fri, 2 Jun 2023 15:59:25 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Add Netgear R8000 WiFi regulator mappings
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This allows setting FullMAC firmware regulatory domain.
-
-Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
-Link: https://lore.kernel.org/r/20230602135925.14143-3-zajec5@gmail.com
-Signed-off-by: Florian Fainelli <florian.fainelli at broadcom.com>
----
- arch/arm/boot/dts/bcm4709-netgear-r8000.dts | 17 +++++++++++++++++
- 1 file changed, 17 insertions(+)
-
---- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-@@ -137,8 +137,10 @@
- #size-cells = <2>;
-
- wifi at 0,1,0 {
-+ compatible = "brcm,bcm4366-fmac", "brcm,bcm4329-fmac";
- reg = <0x0000 0 0 0 0>;
- ieee80211-freq-limit = <5735000 5835000>;
-+ brcm,ccode-map = "JP-JP-78", "US-Q2-86";
- };
- };
- };
-@@ -159,6 +161,19 @@
- #address-cells = <3>;
- #size-cells = <2>;
-
-+ bridge at 1,0 {
-+ reg = <0x800 0 0 0 0>;
-+
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+
-+ wifi at 0,0 {
-+ compatible = "brcm,bcm4366-fmac", "brcm,bcm4329-fmac";
-+ reg = <0x0000 0 0 0 0>;
-+ brcm,ccode-map = "JP-JP-78", "US-Q2-86";
-+ };
-+ };
-+
- bridge at 1,2,2 {
- reg = <0x1000 0 0 0 0>;
-
-@@ -166,8 +181,10 @@
- #size-cells = <2>;
-
- wifi at 1,4,0 {
-+ compatible = "brcm,bcm4366-fmac", "brcm,bcm4329-fmac";
- reg = <0x0000 0 0 0 0>;
- ieee80211-freq-limit = <5170000 5730000>;
-+ brcm,ccode-map = "JP-JP-78", "US-Q2-86";
- };
- };
- };
diff --git a/target/linux/bcm53xx/patches-6.1/031-v6.5-0017-ARM-dts-BCM5301X-Add-cells-sizes-to-PCIe-nodes.patch b/target/linux/bcm53xx/patches-6.1/031-v6.5-0017-ARM-dts-BCM5301X-Add-cells-sizes-to-PCIe-nodes.patch
deleted file mode 100644
index 454ce4c278..0000000000
--- a/target/linux/bcm53xx/patches-6.1/031-v6.5-0017-ARM-dts-BCM5301X-Add-cells-sizes-to-PCIe-nodes.patch
+++ /dev/null
@@ -1,59 +0,0 @@
-From b67cad33176e472df6d16a24ee7624299bdcd5d5 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal at milecki.pl>
-Date: Fri, 16 Jun 2023 12:58:27 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Add cells sizes to PCIe nodes
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This fixes:
-arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: pcie at 12000: '#address-cells' is a required property
- From schema: /lib/python3.10/site-packages/dtschema/schemas/pci/pci-bus.yaml
-arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: pcie at 12000: '#size-cells' is a required property
- From schema: /lib/python3.10/site-packages/dtschema/schemas/pci/pci-bus.yaml
-arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: pcie at 13000: '#address-cells' is a required property
- From schema: /lib/python3.10/site-packages/dtschema/schemas/pci/pci-bus.yaml
-arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: pcie at 13000: '#size-cells' is a required property
- From schema: /lib/python3.10/site-packages/dtschema/schemas/pci/pci-bus.yaml
-arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: pcie at 14000: '#address-cells' is a required property
- From schema: /lib/python3.10/site-packages/dtschema/schemas/pci/pci-bus.yaml
-arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: pcie at 14000: '#size-cells' is a required property
- From schema: /lib/python3.10/site-packages/dtschema/schemas/pci/pci-bus.yaml
-
-Two properties that need to be added later are "device_type" and
-"ranges". Adding "device_type" on its own causes a new warning and the
-value of "ranges" needs to be determined yet.
-
-Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
-Link: https://lore.kernel.org/r/20230616105827.21656-1-zajec5@gmail.com
-Signed-off-by: Florian Fainelli <florian.fainelli at broadcom.com>
----
- arch/arm/boot/dts/bcm-ns.dtsi | 9 +++++++++
- 1 file changed, 9 insertions(+)
-
---- a/arch/arm/boot/dts/bcm-ns.dtsi
-+++ b/arch/arm/boot/dts/bcm-ns.dtsi
-@@ -176,14 +176,23 @@
-
- pcie0: pcie at 12000 {
- reg = <0x00012000 0x1000>;
-+
-+ #address-cells = <3>;
-+ #size-cells = <2>;
- };
-
- pcie1: pcie at 13000 {
- reg = <0x00013000 0x1000>;
-+
-+ #address-cells = <3>;
-+ #size-cells = <2>;
- };
-
- pcie2: pcie at 14000 {
- reg = <0x00014000 0x1000>;
-+
-+ #address-cells = <3>;
-+ #size-cells = <2>;
- };
-
- usb2: usb2 at 21000 {
diff --git a/target/linux/bcm53xx/patches-6.1/032-v6.6-0001-ARM-dts-broadcom-add-missing-space-before.patch b/target/linux/bcm53xx/patches-6.1/032-v6.6-0001-ARM-dts-broadcom-add-missing-space-before.patch
deleted file mode 100644
index 9811757ee2..0000000000
--- a/target/linux/bcm53xx/patches-6.1/032-v6.6-0001-ARM-dts-broadcom-add-missing-space-before.patch
+++ /dev/null
@@ -1,37 +0,0 @@
-From 4b8e16de053fc88eac406ad63da2693dd8279043 Mon Sep 17 00:00:00 2001
-From: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
-Date: Wed, 5 Jul 2023 17:01:07 +0200
-Subject: [PATCH] ARM: dts: broadcom: add missing space before {
-
-Add missing whitespace between node name/label and opening {.
-
-Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
-Link: https://lore.kernel.org/r/20230705150108.293999-1-krzysztof.kozlowski@linaro.org
-Signed-off-by: Florian Fainelli <florian.fainelli at broadcom.com>
----
- arch/arm/boot/dts/broadcom/bcm47094-linksys-panamera.dts | 2 +-
- arch/arm/boot/dts/broadcom/bcm47094-phicomm-k3.dts | 2 +-
- 2 files changed, 2 insertions(+), 2 deletions(-)
-
---- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
-+++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
-@@ -279,7 +279,7 @@
- reg = <0x080000 0x0100000>;
- };
-
-- partition at 180000{
-+ partition at 180000 {
- label = "devinfo";
- reg = <0x0180000 0x080000>;
- };
---- a/arch/arm/boot/dts/bcm47094-phicomm-k3.dts
-+++ b/arch/arm/boot/dts/bcm47094-phicomm-k3.dts
-@@ -55,7 +55,7 @@
- reg = <0x0080000 0x0100000>;
- };
-
-- partition at 180000{
-+ partition at 180000 {
- label = "phicomm";
- reg = <0x0180000 0x0280000>;
- read-only;
diff --git a/target/linux/bcm53xx/patches-6.1/032-v6.6-0002-ARM-dts-BCM5301X-Add-Wi-Fi-regulatory-mappings-for-L.patch b/target/linux/bcm53xx/patches-6.1/032-v6.6-0002-ARM-dts-BCM5301X-Add-Wi-Fi-regulatory-mappings-for-L.patch
deleted file mode 100644
index e5143abf58..0000000000
--- a/target/linux/bcm53xx/patches-6.1/032-v6.6-0002-ARM-dts-BCM5301X-Add-Wi-Fi-regulatory-mappings-for-L.patch
+++ /dev/null
@@ -1,107 +0,0 @@
-From 8960f095de3b80beb3639075f0c8161b6ea98c61 Mon Sep 17 00:00:00 2001
-From: Dan Haab <dan.haab at luxul.com>
-Date: Wed, 5 Jul 2023 09:32:51 -0600
-Subject: [PATCH] ARM: dts: BCM5301X: Add Wi-Fi regulatory mappings for Luxul
- devices
-
-This allows setting FullMAC firmware regulatory domain.
-
-Signed-off-by: Dan Haab <dan.haab at luxul.com>
-Link: https://lore.kernel.org/r/20230705153251.739236-1-riproute@gmail.com
-Signed-off-by: Florian Fainelli <florian.fainelli at broadcom.com>
----
- .../dts/broadcom/bcm47094-luxul-xap-1610.dts | 37 +++++++++++++++++++
- .../broadcom/bcm47094-luxul-xwr-3150-v1.dts | 36 ++++++++++++++++++
- 2 files changed, 73 insertions(+)
-
---- a/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts
-@@ -64,6 +64,43 @@
- nvmem-cell-names = "mac-address";
- };
-
-+
-+&pcie0 {
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+
-+ bridge at 0,0 {
-+ reg = <0x0000 0 0 0 0>;
-+
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+
-+ wifi at 0,0 {
-+ compatible = "brcm,bcm4366-fmac", "brcm,bcm4329-fmac";
-+ reg = <0x0000 0 0 0 0>;
-+ brcm,ccode-map = "AU-AU-920", "CA-CA-892", "GB-DE-964", "NZ-AU-920", "US-US-825";
-+ };
-+ };
-+};
-+
-+&pcie1 {
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+
-+ bridge at 0,0 {
-+ reg = <0x0000 0 0 0 0>;
-+
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+
-+ wifi at 0,0 {
-+ compatible = "brcm,bcm4366-fmac", "brcm,bcm4329-fmac";
-+ reg = <0x0000 0 0 0 0>;
-+ brcm,ccode-map = "AU-AU-920", "CA-CA-892", "GB-DE-964", "NZ-AU-920", "US-US-825";
-+ };
-+ };
-+};
-+
- &spi_nor {
- status = "okay";
- };
---- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
-@@ -81,6 +81,42 @@
- nvmem-cell-names = "mac-address";
- };
-
-+&pcie0 {
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+
-+ bridge at 0,0 {
-+ reg = <0x0000 0 0 0 0>;
-+
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+
-+ wifi at 0,0 {
-+ compatible = "brcm,bcm4366-fmac", "brcm,bcm4329-fmac";
-+ reg = <0x0000 0 0 0 0>;
-+ brcm,ccode-map = "AU-AU-953", "CA-CA-946", "GB-E0-846", "NZ-AU-953", "US-Q2-930";
-+ };
-+ };
-+};
-+
-+&pcie1 {
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+
-+ bridge at 0,0 {
-+ reg = <0x0000 0 0 0 0>;
-+
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+
-+ wifi at 0,0 {
-+ compatible = "brcm,bcm4366-fmac", "brcm,bcm4329-fmac";
-+ reg = <0x0000 0 0 0 0>;
-+ brcm,ccode-map = "AU-AU-953", "CA-CA-946", "GB-E0-846", "NZ-AU-953", "US-Q2-930";
-+ };
-+ };
-+};
-+
- &usb3 {
- vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
- };
diff --git a/target/linux/bcm53xx/patches-6.1/032-v6.6-0003-ARM-dts-BCM5301X-Add-Ethernet-interfaces-links.patch b/target/linux/bcm53xx/patches-6.1/032-v6.6-0003-ARM-dts-BCM5301X-Add-Ethernet-interfaces-links.patch
deleted file mode 100644
index 4b2e608ec2..0000000000
--- a/target/linux/bcm53xx/patches-6.1/032-v6.6-0003-ARM-dts-BCM5301X-Add-Ethernet-interfaces-links.patch
+++ /dev/null
@@ -1,53 +0,0 @@
-From 2ce61fa62183cf994666fcc911da34075c7183b5 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal at milecki.pl>
-Date: Fri, 7 Jul 2023 11:15:19 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Add Ethernet interfaces links
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Northstar SoCs have 3 usable Ethernet interfaces each connected to one
-of switch ports. They all use fixed links.
-
-Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
-Link: https://lore.kernel.org/r/20230707091519.21673-1-zajec5@gmail.com
-Signed-off-by: Florian Fainelli <florian.fainelli at broadcom.com>
----
- arch/arm/boot/dts/broadcom/bcm-ns.dtsi | 18 ++++++++++++++++++
- 1 file changed, 18 insertions(+)
-
---- a/arch/arm/boot/dts/bcm-ns.dtsi
-+++ b/arch/arm/boot/dts/bcm-ns.dtsi
-@@ -272,14 +272,32 @@
-
- gmac0: ethernet at 24000 {
- reg = <0x24000 0x800>;
-+ phy-mode = "internal";
-+
-+ fixed-link {
-+ speed = <1000>;
-+ full-duplex;
-+ };
- };
-
- gmac1: ethernet at 25000 {
- reg = <0x25000 0x800>;
-+ phy-mode = "internal";
-+
-+ fixed-link {
-+ speed = <1000>;
-+ full-duplex;
-+ };
- };
-
- gmac2: ethernet at 26000 {
- reg = <0x26000 0x800>;
-+ phy-mode = "internal";
-+
-+ fixed-link {
-+ speed = <1000>;
-+ full-duplex;
-+ };
- };
-
- gmac3: ethernet at 27000 {
diff --git a/target/linux/bcm53xx/patches-6.1/032-v6.6-0004-ARM-dts-BCM53573-Drop-nonexistent-default-off-LED-tr.patch b/target/linux/bcm53xx/patches-6.1/032-v6.6-0004-ARM-dts-BCM53573-Drop-nonexistent-default-off-LED-tr.patch
deleted file mode 100644
index 8bad76edca..0000000000
--- a/target/linux/bcm53xx/patches-6.1/032-v6.6-0004-ARM-dts-BCM53573-Drop-nonexistent-default-off-LED-tr.patch
+++ /dev/null
@@ -1,57 +0,0 @@
-From be7e1e5b0f67c58ec4be0a54db23b6a4fa6e2116 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal at milecki.pl>
-Date: Fri, 7 Jul 2023 13:40:01 +0200
-Subject: [PATCH] ARM: dts: BCM53573: Drop nonexistent "default-off" LED
- trigger
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-There is no such trigger documented or implemented in Linux. It was a
-copy & paste mistake.
-
-This fixes:
-arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dtb: leds: led-wlan:linux,default-trigger: 'oneOf' conditional failed, one must be fixed:
- 'default-off' is not one of ['backlight', 'default-on', 'heartbeat', 'disk-activity', 'disk-read', 'disk-write', 'timer', 'pattern', 'audio-micmute', 'audio-mute', 'bluetooth-power', 'flash', 'kbd-capslock', 'mtd', 'nand-disk', 'none', 'torch', 'usb-gadget', 'usb-host', 'usbport']
- 'default-off' does not match '^cpu[0-9]*$'
- 'default-off' does not match '^hci[0-9]+-power$'
- 'default-off' does not match '^mmc[0-9]+$'
- 'default-off' does not match '^phy[0-9]+tx$'
- From schema: Documentation/devicetree/bindings/leds/leds-gpio.yaml
-
-Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
-Link: https://lore.kernel.org/r/20230707114004.2740-1-zajec5@gmail.com
-Signed-off-by: Florian Fainelli <florian.fainelli at broadcom.com>
----
- arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dts | 1 -
- arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-810.dts | 2 --
- 2 files changed, 3 deletions(-)
-
---- a/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
-+++ b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
-@@ -26,7 +26,6 @@
- led-wlan {
- label = "bcm53xx:blue:wlan";
- gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
-
- led-system {
---- a/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
-+++ b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
-@@ -26,7 +26,6 @@
- led-5ghz {
- label = "bcm53xx:blue:5ghz";
- gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "default-off";
- };
-
- led-system {
-@@ -42,7 +41,6 @@
- led-2ghz {
- label = "bcm53xx:blue:2ghz";
- gpios = <&pcie0_chipcommon 3 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "default-off";
- };
- };
-
diff --git a/target/linux/bcm53xx/patches-6.1/032-v6.6-0009-ARM-dts-BCM53573-Fix-Ethernet-info-for-Luxul-devices.patch b/target/linux/bcm53xx/patches-6.1/032-v6.6-0009-ARM-dts-BCM53573-Fix-Ethernet-info-for-Luxul-devices.patch
deleted file mode 100644
index 7930c52b16..0000000000
--- a/target/linux/bcm53xx/patches-6.1/032-v6.6-0009-ARM-dts-BCM53573-Fix-Ethernet-info-for-Luxul-devices.patch
+++ /dev/null
@@ -1,75 +0,0 @@
-From 44ad8207806973f4e4f7d870fff36cc01f494250 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal at milecki.pl>
-Date: Thu, 13 Jul 2023 13:11:45 +0200
-Subject: [PATCH] ARM: dts: BCM53573: Fix Ethernet info for Luxul devices
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Both Luxul's XAP devices (XAP-810 and XAP-1440) are access points that
-use a non-default design. They don't include switch but have a single
-Ethernet port and BCM54210E PHY connected to the Ethernet controller's
-MDIO bus.
-
-Support for those devices regressed due to two changes:
-
-1. Describing MDIO bus with switch
-After commit 9fb90ae6cae7 ("ARM: dts: BCM53573: Describe on-SoC BCM53125
-rev 4 switch") Linux stopped probing for MDIO devices.
-
-2. Dropping hardcoded BCM54210E delays
-In commit fea7fda7f50a ("net: phy: broadcom: Fix RGMII delays
-configuration for BCM54210E") support for other PHY modes was added but
-that requires a proper "phy-mode" value in DT.
-
-Both above changes are correct (they don't need to be reverted or
-anything) but they need this fix for DT data to be correct and for Linux
-to work properly.
-
-Fixes: 9fb90ae6cae7 ("ARM: dts: BCM53573: Describe on-SoC BCM53125 rev 4 switch")
-Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
-Link: https://lore.kernel.org/r/20230713111145.14864-1-zajec5@gmail.com
-Signed-off-by: Florian Fainelli <florian.fainelli at broadcom.com>
----
- .../boot/dts/broadcom/bcm47189-luxul-xap-1440.dts | 13 +++++++++++++
- .../boot/dts/broadcom/bcm47189-luxul-xap-810.dts | 13 +++++++++++++
- 2 files changed, 26 insertions(+)
-
---- a/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
-+++ b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
-@@ -58,3 +58,16 @@
- };
- };
- };
-+
-+&gmac0 {
-+ phy-mode = "rgmii";
-+ phy-handle = <&bcm54210e>;
-+
-+ mdio {
-+ /delete-node/ switch at 1e;
-+
-+ bcm54210e: ethernet-phy at 0 {
-+ reg = <0>;
-+ };
-+ };
-+};
---- a/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
-+++ b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
-@@ -94,3 +94,16 @@
- };
- };
- };
-+
-+&gmac0 {
-+ phy-mode = "rgmii";
-+ phy-handle = <&bcm54210e>;
-+
-+ mdio {
-+ /delete-node/ switch at 1e;
-+
-+ bcm54210e: ethernet-phy at 0 {
-+ reg = <0>;
-+ };
-+ };
-+};
diff --git a/target/linux/bcm53xx/patches-6.1/032-v6.6-0010-ARM-dts-bcm5301x-Add-SEAMA-compatibles.patch b/target/linux/bcm53xx/patches-6.1/032-v6.6-0010-ARM-dts-bcm5301x-Add-SEAMA-compatibles.patch
deleted file mode 100644
index f23873e111..0000000000
--- a/target/linux/bcm53xx/patches-6.1/032-v6.6-0010-ARM-dts-bcm5301x-Add-SEAMA-compatibles.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From 72ec77d74d28be7359ef77971cdee38b60af9e49 Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij at linaro.org>
-Date: Thu, 13 Jul 2023 00:16:42 +0200
-Subject: [PATCH] ARM: dts: bcm5301x: Add SEAMA compatibles
-
-This adds SEAMA compatibles to the firmware partition of these
-two D-Link devices.
-
-Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
-Link: https://lore.kernel.org/r/20230713-seama-partitions-v4-2-69e577453d40@linaro.org
-Signed-off-by: Florian Fainelli <florian.fainelli at broadcom.com>
----
- arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-885l.dts | 1 +
- arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-890l.dts | 1 +
- 2 files changed, 2 insertions(+)
-
---- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
-+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
-@@ -33,6 +33,7 @@
- #size-cells = <1>;
-
- partition at 0 {
-+ compatible = "seama";
- label = "firmware";
- reg = <0x00000000 0x08000000>;
- };
---- a/arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts
-+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts
-@@ -149,6 +149,7 @@
- * partitions: this device uses SEAMA.
- */
- firmware at 0 {
-+ compatible = "seama";
- label = "firmware";
- reg = <0x00000000 0x08000000>;
- };
diff --git a/target/linux/bcm53xx/patches-6.1/032-v6.6-0012-ARM-dts-BCM53573-Describe-BCM53125-switch-ports-in-t.patch b/target/linux/bcm53xx/patches-6.1/032-v6.6-0012-ARM-dts-BCM53573-Describe-BCM53125-switch-ports-in-t.patch
deleted file mode 100644
index ab27495078..0000000000
--- a/target/linux/bcm53xx/patches-6.1/032-v6.6-0012-ARM-dts-BCM53573-Describe-BCM53125-switch-ports-in-t.patch
+++ /dev/null
@@ -1,97 +0,0 @@
-From 8d6b61ecad2f1c939813c5c4517d53e04672dc48 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal at milecki.pl>
-Date: Sun, 23 Jul 2023 21:54:15 +0200
-Subject: [PATCH] ARM: dts: BCM53573: Describe BCM53125 switch ports in the
- main DTS
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-BCM53125 always has 5 ports with GPHYs (for LAN/WAN ports) and 2 IMP
-ports. It seems the best place to describe that in the main .dtsi.
-Device specific bits can go to device .dts files. This will help
-avoiding some code duplication.
-
-Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
-Link: https://lore.kernel.org/r/20230723195416.7831-2-zajec5@gmail.com
-Signed-off-by: Florian Fainelli <florian.fainelli at broadcom.com>
----
- .../boot/dts/broadcom/bcm47189-tenda-ac9.dts | 7 -----
- arch/arm/boot/dts/broadcom/bcm53573.dtsi | 26 ++++++++++++++++++-
- 2 files changed, 25 insertions(+), 8 deletions(-)
-
---- a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
-+++ b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
-@@ -111,34 +111,27 @@
-
- ports {
- port at 0 {
-- reg = <0>;
- label = "wan";
- };
-
- port at 1 {
-- reg = <1>;
- label = "lan1";
- };
-
- port at 2 {
-- reg = <2>;
- label = "lan2";
- };
-
- port at 3 {
-- reg = <3>;
- label = "lan3";
- };
-
- port at 4 {
-- reg = <4>;
- label = "lan4";
- };
-
- port at 8 {
-- reg = <8>;
- label = "cpu";
-- ethernet = <&gmac0>;
- };
- };
- };
---- a/arch/arm/boot/dts/bcm53573.dtsi
-+++ b/arch/arm/boot/dts/bcm53573.dtsi
-@@ -192,10 +192,34 @@
-
- status = "disabled";
-
-- /* ports are defined in board DTS */
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-+
-+ port at 0 {
-+ reg = <0>;
-+ };
-+
-+ port at 1 {
-+ reg = <1>;
-+ };
-+
-+ port at 2 {
-+ reg = <2>;
-+ };
-+
-+ port at 3 {
-+ reg = <3>;
-+ };
-+
-+ port at 4 {
-+ reg = <4>;
-+ };
-+
-+ port at 8 {
-+ reg = <8>;
-+ ethernet = <&gmac0>;
-+ };
- };
- };
- };
diff --git a/target/linux/bcm53xx/patches-6.1/032-v6.6-0013-ARM-dts-BCM53573-Add-BCM53125-switch-port-5.patch b/target/linux/bcm53xx/patches-6.1/032-v6.6-0013-ARM-dts-BCM53573-Add-BCM53125-switch-port-5.patch
deleted file mode 100644
index cc9e86ac75..0000000000
--- a/target/linux/bcm53xx/patches-6.1/032-v6.6-0013-ARM-dts-BCM53573-Add-BCM53125-switch-port-5.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From d95b1caeea194962220db1778ce7fe71cdba788b Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal at milecki.pl>
-Date: Sun, 23 Jul 2023 21:54:16 +0200
-Subject: [PATCH] ARM: dts: BCM53573: Add BCM53125 switch port 5
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-It's connected to the extra Ethernet interface.
-
-Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
-Link: https://lore.kernel.org/r/20230723195416.7831-3-zajec5@gmail.com
-Signed-off-by: Florian Fainelli <florian.fainelli at broadcom.com>
----
- arch/arm/boot/dts/broadcom/bcm53573.dtsi | 10 ++++++++++
- 1 file changed, 10 insertions(+)
-
---- a/arch/arm/boot/dts/bcm53573.dtsi
-+++ b/arch/arm/boot/dts/bcm53573.dtsi
-@@ -216,6 +216,16 @@
- reg = <4>;
- };
-
-+ port at 5 {
-+ reg = <5>;
-+ ethernet = <&gmac1>;
-+
-+ fixed-link {
-+ speed = <1000>;
-+ full-duplex;
-+ };
-+ };
-+
- port at 8 {
- reg = <8>;
- ethernet = <&gmac0>;
diff --git a/target/linux/bcm53xx/patches-6.1/032-v6.6-0014-ARM-dts-BCM53573-Add-Ethernet-interfaces-links.patch b/target/linux/bcm53xx/patches-6.1/032-v6.6-0014-ARM-dts-BCM53573-Add-Ethernet-interfaces-links.patch
deleted file mode 100644
index f97d4edd75..0000000000
--- a/target/linux/bcm53xx/patches-6.1/032-v6.6-0014-ARM-dts-BCM53573-Add-Ethernet-interfaces-links.patch
+++ /dev/null
@@ -1,73 +0,0 @@
-From e0ae343a2c1b782a346d9b844ea65e1d49c428b2 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal at milecki.pl>
-Date: Mon, 24 Jul 2023 12:12:27 +0200
-Subject: [PATCH] ARM: dts: BCM53573: Add Ethernet interfaces links
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-BCM53573 has 2 Ethernet interfaces each connected to one of switch ports
-in the default design. They both use fixed links.
-
-An exception are Luxul XAP devices that have switch replaced by a single
-PHY.
-
-Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
-Link: https://lore.kernel.org/r/20230724101227.5420-1-zajec5@gmail.com
-Signed-off-by: Florian Fainelli <florian.fainelli at broadcom.com>
----
- .../boot/dts/broadcom/bcm47189-luxul-xap-1440.dts | 2 ++
- .../arm/boot/dts/broadcom/bcm47189-luxul-xap-810.dts | 2 ++
- arch/arm/boot/dts/broadcom/bcm53573.dtsi | 12 ++++++++++++
- 3 files changed, 16 insertions(+)
-
---- a/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
-+++ b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
-@@ -50,6 +50,8 @@
- phy-mode = "rgmii";
- phy-handle = <&bcm54210e>;
-
-+ /delete-node/ fixed-link;
-+
- mdio {
- /delete-node/ switch at 1e;
-
---- a/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
-+++ b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
-@@ -86,6 +86,8 @@
- phy-mode = "rgmii";
- phy-handle = <&bcm54210e>;
-
-+ /delete-node/ fixed-link;
-+
- mdio {
- /delete-node/ switch at 1e;
-
---- a/arch/arm/boot/dts/bcm53573.dtsi
-+++ b/arch/arm/boot/dts/bcm53573.dtsi
-@@ -181,6 +181,12 @@
-
- gmac0: ethernet at 5000 {
- reg = <0x5000 0x1000>;
-+ phy-mode = "internal";
-+
-+ fixed-link {
-+ speed = <1000>;
-+ full-duplex;
-+ };
-
- mdio {
- #address-cells = <1>;
-@@ -237,6 +243,12 @@
-
- gmac1: ethernet at b000 {
- reg = <0xb000 0x1000>;
-+ phy-mode = "internal";
-+
-+ fixed-link {
-+ speed = <1000>;
-+ full-duplex;
-+ };
- };
-
- pmu at 12000 {
diff --git a/target/linux/bcm53xx/patches-6.1/032-v6.6-0015-ARM-dts-BCM53573-Disable-second-Ethernet-on-Luxul-de.patch b/target/linux/bcm53xx/patches-6.1/032-v6.6-0015-ARM-dts-BCM53573-Disable-second-Ethernet-on-Luxul-de.patch
deleted file mode 100644
index e9e347075d..0000000000
--- a/target/linux/bcm53xx/patches-6.1/032-v6.6-0015-ARM-dts-BCM53573-Disable-second-Ethernet-on-Luxul-de.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-From d8835601e3c306fda78f8736f1aef688e99e892d Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal at milecki.pl>
-Date: Mon, 24 Jul 2023 12:11:59 +0200
-Subject: [PATCH] ARM: dts: BCM53573: Disable second Ethernet on Luxul devices
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-XAP-810 and XAP-1440 both have a single Ethernet port and BCM54210E PHY.
-Their second Ethernet interface is not connected to anything.
-
-Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
-Link: https://lore.kernel.org/r/20230724101159.5289-1-zajec5@gmail.com
-Signed-off-by: Florian Fainelli <florian.fainelli at broadcom.com>
----
- arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dts | 4 ++++
- arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-810.dts | 4 ++++
- 2 files changed, 8 insertions(+)
-
---- a/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
-+++ b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
-@@ -73,3 +73,7 @@
- };
- };
- };
-+
-+&gmac1 {
-+ status = "disabled";
-+};
---- a/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
-+++ b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
-@@ -109,3 +109,7 @@
- };
- };
- };
-+
-+&gmac1 {
-+ status = "disabled";
-+};
diff --git a/target/linux/bcm53xx/patches-6.1/032-v6.6-0016-ARM-dts-BCM5301X-Add-DT-for-Asus-RT-AC3100.patch b/target/linux/bcm53xx/patches-6.1/032-v6.6-0016-ARM-dts-BCM5301X-Add-DT-for-Asus-RT-AC3100.patch
deleted file mode 100644
index 47d5b10839..0000000000
--- a/target/linux/bcm53xx/patches-6.1/032-v6.6-0016-ARM-dts-BCM5301X-Add-DT-for-Asus-RT-AC3100.patch
+++ /dev/null
@@ -1,431 +0,0 @@
-From 2900083269f7c0f0ff430bffc6ced2038aed9b6b Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal at arinc9.com>
-Date: Thu, 3 Aug 2023 10:14:54 +0300
-Subject: [PATCH] ARM: dts: BCM5301X: Add DT for ASUS RT-AC3100
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-ASUS RT-AC3100 is ASUS RT-AC88U without the external switch. Move the
-shared bindings to bcm47094-asus-rt-ac3100.dtsi.
-
-Remove the fixed-link node on port at 7 as commit ba4aebce23b2 ("ARM: dts:
-BCM5301X: Describe switch ports in the main DTS") states it's not
-necessary.
-
-Replace the copyright notice with an author notice.
-
-Rename the model name from Asus to ASUS on bcm47094-asus-rt-ac88u.dts.
-
-Signed-off-by: Arınç ÜNAL <arinc.unal at arinc9.com>
-Reviewed-by: Linus Walleij <linus.walleij at linaro.org>
-Link: https://lore.kernel.org/r/20230803071454.5902-2-arinc.unal@arinc9.com
-Signed-off-by: Florian Fainelli <florian.fainelli at broadcom.com>
----
- arch/arm/boot/dts/Makefile | 1 +
- .../dts/bcm47094-asus-rt-ac3100.dts | 23 +++
- .../dts/bcm47094-asus-rt-ac3100.dtsi | 163 ++++++++++++++++++
- .../dts/bcm47094-asus-rt-ac88u.dts | 155 +----------------
- 4 files changed, 190 insertions(+), 152 deletions(-)
- create mode 100644 arch/arm/boot/dts/bcm47094-asus-rt-ac3100.dts
- create mode 100644 arch/arm/boot/dts/bcm47094-asus-rt-ac3100.dtsi
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -127,6 +127,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- bcm4709-netgear-r7000.dtb \
- bcm4709-netgear-r8000.dtb \
- bcm4709-tplink-archer-c9-v1.dtb \
-+ bcm47094-asus-rt-ac3100.dtb \
- bcm47094-asus-rt-ac88u.dtb \
- bcm47094-dlink-dir-885l.dtb \
- bcm47094-dlink-dir-890l.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm47094-asus-rt-ac3100.dts
-@@ -0,0 +1,23 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-+/*
-+ * Author: Arınç ÜNAL <arinc.unal at arinc9.com>
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm47094-asus-rt-ac3100.dtsi"
-+
-+/ {
-+ compatible = "asus,rt-ac3100", "brcm,bcm47094", "brcm,bcm4708";
-+ model = "ASUS RT-AC3100";
-+
-+ nvram at 1c080000 {
-+ et0macaddr: et0macaddr {
-+ };
-+ };
-+};
-+
-+&gmac0 {
-+ nvmem-cells = <&et0macaddr>;
-+ nvmem-cell-names = "mac-address";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm47094-asus-rt-ac3100.dtsi
-@@ -0,0 +1,163 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-+/*
-+ * Author: Arınç ÜNAL <arinc.unal at arinc9.com>
-+ */
-+
-+#include "bcm47094.dtsi"
-+#include "bcm5301x-nand-cs0-bch8.dtsi"
-+
-+/ {
-+ chosen {
-+ bootargs = "earlycon";
-+ };
-+
-+ memory at 0 {
-+ device_type = "memory";
-+ reg = <0x00000000 0x08000000>,
-+ <0x88000000 0x18000000>;
-+ };
-+
-+ nvram at 1c080000 {
-+ compatible = "brcm,nvram";
-+ reg = <0x1c080000 0x00180000>;
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ led-power {
-+ label = "white:power";
-+ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-on";
-+ };
-+
-+ led-wan-red {
-+ label = "red:wan";
-+ gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ led-lan {
-+ label = "white:lan";
-+ gpios = <&chipcommon 21 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ led-usb2 {
-+ label = "white:usb2";
-+ gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
-+ trigger-sources = <&ehci_port2>;
-+ linux,default-trigger = "usbport";
-+ };
-+
-+ led-usb3 {
-+ label = "white:usb3";
-+ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
-+ trigger-sources = <&ehci_port1>, <&xhci_port1>;
-+ linux,default-trigger = "usbport";
-+ };
-+
-+ led-wps {
-+ label = "white:wps";
-+ gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+
-+ gpio-keys {
-+ compatible = "gpio-keys";
-+
-+ button-wps {
-+ label = "WPS";
-+ linux,code = <KEY_WPS_BUTTON>;
-+ gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ button-reset {
-+ label = "Reset";
-+ linux,code = <KEY_RESTART>;
-+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ button-wifi {
-+ label = "Wi-Fi";
-+ linux,code = <KEY_RFKILL>;
-+ gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ button-led {
-+ label = "Backlight";
-+ linux,code = <KEY_BRIGHTNESS_ZERO>;
-+ gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+};
-+
-+&srab {
-+ compatible = "brcm,bcm53012-srab", "brcm,bcm5301x-srab";
-+ status = "okay";
-+
-+ ports {
-+ port at 0 {
-+ label = "lan4";
-+ };
-+
-+ port at 1 {
-+ label = "lan3";
-+ };
-+
-+ port at 2 {
-+ label = "lan2";
-+ };
-+
-+ port at 3 {
-+ label = "lan1";
-+ };
-+
-+ port at 4 {
-+ label = "wan";
-+ };
-+
-+ port at 5 {
-+ label = "cpu";
-+ };
-+
-+ port at 7 {
-+ label = "cpu";
-+ };
-+
-+ port at 8 {
-+ label = "cpu";
-+ };
-+ };
-+};
-+
-+&usb2 {
-+ vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
-+};
-+
-+&usb3_phy {
-+ status = "okay";
-+};
-+
-+&nandcs {
-+ partitions {
-+ compatible = "fixed-partitions";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ partition at 0 {
-+ label = "boot";
-+ reg = <0x00000000 0x00080000>;
-+ read-only;
-+ };
-+
-+ partition at 80000 {
-+ label = "nvram";
-+ reg = <0x00080000 0x00180000>;
-+ };
-+
-+ partition at 200000 {
-+ label = "firmware";
-+ reg = <0x00200000 0x07e00000>;
-+ compatible = "brcm,trx";
-+ };
-+ };
-+};
---- a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
-+++ b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
-@@ -1,102 +1,21 @@
- // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
- /*
-- * Copyright (C) 2021-2022 Arınç ÜNAL <arinc.unal at arinc9.com>
-+ * Author: Arınç ÜNAL <arinc.unal at arinc9.com>
- */
-
- /dts-v1/;
-
--#include "bcm47094.dtsi"
--#include "bcm5301x-nand-cs0-bch8.dtsi"
-+#include "bcm47094-asus-rt-ac3100.dtsi"
-
- / {
- compatible = "asus,rt-ac88u", "brcm,bcm47094", "brcm,bcm4708";
-- model = "Asus RT-AC88U";
--
-- chosen {
-- bootargs = "earlycon";
-- };
--
-- memory at 0 {
-- device_type = "memory";
-- reg = <0x00000000 0x08000000>,
-- <0x88000000 0x18000000>;
-- };
-+ model = "ASUS RT-AC88U";
-
- nvram at 1c080000 {
-- compatible = "brcm,nvram";
-- reg = <0x1c080000 0x00180000>;
--
- et1macaddr: et1macaddr {
- };
- };
-
-- leds {
-- compatible = "gpio-leds";
--
-- led-power {
-- label = "white:power";
-- gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-on";
-- };
--
-- led-wan-red {
-- label = "red:wan";
-- gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
-- };
--
-- led-lan {
-- label = "white:lan";
-- gpios = <&chipcommon 21 GPIO_ACTIVE_LOW>;
-- };
--
-- led-usb2 {
-- label = "white:usb2";
-- gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
-- trigger-sources = <&ehci_port2>;
-- linux,default-trigger = "usbport";
-- };
--
-- led-usb3 {
-- label = "white:usb3";
-- gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
-- trigger-sources = <&ehci_port1>, <&xhci_port1>;
-- linux,default-trigger = "usbport";
-- };
--
-- led-wps {
-- label = "white:wps";
-- gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
-- };
-- };
--
-- gpio-keys {
-- compatible = "gpio-keys";
--
-- button-wps {
-- label = "WPS";
-- linux,code = <KEY_WPS_BUTTON>;
-- gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
-- };
--
-- button-reset {
-- label = "Reset";
-- linux,code = <KEY_RESTART>;
-- gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-- };
--
-- button-wifi {
-- label = "Wi-Fi";
-- linux,code = <KEY_RFKILL>;
-- gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
-- };
--
-- button-led {
-- label = "Backlight";
-- linux,code = <KEY_BRIGHTNESS_ZERO>;
-- gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
-- };
-- };
--
- switch {
- compatible = "realtek,rtl8365mb";
- /* 7 = MDIO (has input reads), 6 = MDC (clock, output only) */
-@@ -175,31 +94,9 @@
- };
-
- &srab {
-- compatible = "brcm,bcm53012-srab", "brcm,bcm5301x-srab";
-- status = "okay";
- dsa,member = <0 0>;
-
- ports {
-- port at 0 {
-- label = "lan4";
-- };
--
-- port at 1 {
-- label = "lan3";
-- };
--
-- port at 2 {
-- label = "lan2";
-- };
--
-- port at 3 {
-- label = "lan1";
-- };
--
-- port at 4 {
-- label = "wan";
-- };
--
- sw0_p5: port at 5 {
- /delete-property/ethernet;
-
-@@ -212,19 +109,6 @@
- pause;
- };
- };
--
-- port at 7 {
-- label = "cpu";
--
-- fixed-link {
-- speed = <1000>;
-- full-duplex;
-- };
-- };
--
-- port at 8 {
-- label = "cpu";
-- };
- };
- };
-
-@@ -236,36 +120,3 @@
- nvmem-cells = <&et1macaddr>;
- nvmem-cell-names = "mac-address";
- };
--
--&usb2 {
-- vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
--};
--
--&usb3_phy {
-- status = "okay";
--};
--
--&nandcs {
-- partitions {
-- compatible = "fixed-partitions";
-- #address-cells = <1>;
-- #size-cells = <1>;
--
-- partition at 0 {
-- label = "boot";
-- reg = <0x00000000 0x00080000>;
-- read-only;
-- };
--
-- partition at 80000 {
-- label = "nvram";
-- reg = <0x00080000 0x00180000>;
-- };
--
-- partition at 200000 {
-- label = "firmware";
-- reg = <0x00200000 0x07e00000>;
-- compatible = "brcm,trx";
-- };
-- };
--};
diff --git a/target/linux/bcm53xx/patches-6.1/033-v6.7-0001-ARM-dts-BCM5301X-Set-MACs-for-D-Link-DIR-885L.patch b/target/linux/bcm53xx/patches-6.1/033-v6.7-0001-ARM-dts-BCM5301X-Set-MACs-for-D-Link-DIR-885L.patch
deleted file mode 100644
index 78b8975f1f..0000000000
--- a/target/linux/bcm53xx/patches-6.1/033-v6.7-0001-ARM-dts-BCM5301X-Set-MACs-for-D-Link-DIR-885L.patch
+++ /dev/null
@@ -1,56 +0,0 @@
-From 5cbee5828219c4f7b33e96b5d8ce5e467b2857c8 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal at milecki.pl>
-Date: Fri, 1 Sep 2023 12:55:49 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Set MACs for D-Link DIR-885L
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Specify NVRAM access and use its "et2macaddr" NVMEM cell.
-
-Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
-Link: https://lore.kernel.org/r/20230901105549.7076-1-zajec5@gmail.com
-Signed-off-by: Florian Fainelli <florian.fainelli at broadcom.com>
----
- .../dts/broadcom/bcm47094-dlink-dir-885l.dts | 16 ++++++++++++++++
- 1 file changed, 16 insertions(+)
-
---- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
-+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
-@@ -25,6 +25,15 @@
- <0x88000000 0x08000000>;
- };
-
-+ nvram at 1e3f0000 {
-+ compatible = "brcm,nvram";
-+ reg = <0x1e3f0000 0x10000>;
-+
-+ et2macaddr: et2macaddr {
-+ #nvmem-cell-cells = <1>;
-+ };
-+ };
-+
- nand_controller: nand-controller at 18028000 {
- nand at 0 {
- partitions {
-@@ -112,6 +121,11 @@
- vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
- };
-
-+&gmac0 {
-+ nvmem-cells = <&et2macaddr 0>;
-+ nvmem-cell-names = "mac-address";
-+};
-+
- &spi_nor {
- status = "okay";
- };
-@@ -142,6 +156,8 @@
-
- port at 4 {
- label = "wan";
-+ nvmem-cells = <&et2macaddr 3>;
-+ nvmem-cell-names = "mac-address";
- };
-
- port at 8 {
diff --git a/target/linux/bcm53xx/patches-6.1/033-v6.7-0002-ARM-dts-BCM5301X-Set-MAC-address-for-Asus-RT-AC87U.patch b/target/linux/bcm53xx/patches-6.1/033-v6.7-0002-ARM-dts-BCM5301X-Set-MAC-address-for-Asus-RT-AC87U.patch
deleted file mode 100644
index 11ce7acb53..0000000000
--- a/target/linux/bcm53xx/patches-6.1/033-v6.7-0002-ARM-dts-BCM5301X-Set-MAC-address-for-Asus-RT-AC87U.patch
+++ /dev/null
@@ -1,44 +0,0 @@
-From a9e79863b62aaaefcdf469fc331bf482ae00db0d Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal at milecki.pl>
-Date: Fri, 1 Sep 2023 14:43:11 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Set MAC address for Asus RT-AC87U
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Specify NVRAM access and use its "et1macaddr" NVMEM cell.
-
-Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
-Link: https://lore.kernel.org/r/20230901124311.31156-1-zajec5@gmail.com
-Signed-off-by: Florian Fainelli <florian.fainelli at broadcom.com>
----
- arch/arm/boot/dts/broadcom/bcm4709-asus-rt-ac87u.dts | 11 +++++++++++
- 1 file changed, 11 insertions(+)
-
---- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
-+++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
-@@ -25,6 +25,12 @@
- <0x88000000 0x08000000>;
- };
-
-+ nvram at 1c080000 {
-+ et1macaddr: et1macaddr {
-+ #nvmem-cell-cells = <1>;
-+ };
-+ };
-+
- leds {
- compatible = "gpio-leds";
-
-@@ -62,6 +68,11 @@
- };
- };
-
-+&gmac0 {
-+ nvmem-cells = <&et1macaddr 0>;
-+ nvmem-cell-names = "mac-address";
-+};
-+
- &usb3_phy {
- status = "okay";
- };
diff --git a/target/linux/bcm53xx/patches-6.1/033-v6.7-0003-ARM-dts-BCM5301X-Relicense-Felix-s-code-to-the-GPL-2.patch b/target/linux/bcm53xx/patches-6.1/033-v6.7-0003-ARM-dts-BCM5301X-Relicense-Felix-s-code-to-the-GPL-2.patch
deleted file mode 100644
index 6df1e555e9..0000000000
--- a/target/linux/bcm53xx/patches-6.1/033-v6.7-0003-ARM-dts-BCM5301X-Relicense-Felix-s-code-to-the-GPL-2.patch
+++ /dev/null
@@ -1,57 +0,0 @@
-From 81ea360a16978a4df61df9db56b171909bd659c0 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal at milecki.pl>
-Date: Sat, 16 Sep 2023 10:30:57 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Relicense Felix's code to the GPL 2.0+ /
- MIT
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Move code added by Felix to the bcm-ns.dtsi which uses dual licensing.
-That syncs more Northstar code to be based on the same licensing schema.
-
-This code was added in the commit 1ff80363524c ("ARM: BCM5301X: Add
-profiling support").
-
-Cc: Felix Fietkau <nbd at nbd.name>
-Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
-Acked-by: Felix Fietkau <nbd at nbd.name>
-Link: https://lore.kernel.org/r/20230916083057.10458-1-zajec5@gmail.com
-Signed-off-by: Florian Fainelli <florian.fainelli at broadcom.com>
----
- arch/arm/boot/dts/broadcom/bcm-ns.dtsi | 7 +++++++
- arch/arm/boot/dts/broadcom/bcm5301x.dtsi | 7 -------
- 2 files changed, 7 insertions(+), 7 deletions(-)
-
---- a/arch/arm/boot/dts/bcm-ns.dtsi
-+++ b/arch/arm/boot/dts/bcm-ns.dtsi
-@@ -14,6 +14,13 @@
- #address-cells = <1>;
- #size-cells = <1>;
-
-+ pmu {
-+ compatible = "arm,cortex-a9-pmu";
-+ interrupts =
-+ <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
-+ <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
-+ };
-+
- chipcommon-a-bus at 18000000 {
- compatible = "simple-bus";
- ranges = <0x00000000 0x18000000 0x00001000>;
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -26,13 +26,6 @@
- };
- };
-
-- pmu {
-- compatible = "arm,cortex-a9-pmu";
-- interrupts =
-- <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
-- <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
-- };
--
- clocks {
- #address-cells = <1>;
- #size-cells = <1>;
diff --git a/target/linux/bcm53xx/patches-6.1/033-v6.7-0004-ARM-dts-BCM5301X-Relicense-Vivek-s-code-to-the-GPL-2.patch b/target/linux/bcm53xx/patches-6.1/033-v6.7-0004-ARM-dts-BCM5301X-Relicense-Vivek-s-code-to-the-GPL-2.patch
deleted file mode 100644
index 66db4a291f..0000000000
--- a/target/linux/bcm53xx/patches-6.1/033-v6.7-0004-ARM-dts-BCM5301X-Relicense-Vivek-s-code-to-the-GPL-2.patch
+++ /dev/null
@@ -1,104 +0,0 @@
-From b8d4f7c1be04d66c37c119c501c87bccc4197694 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal at milecki.pl>
-Date: Sat, 16 Sep 2023 10:58:55 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Relicense Vivek's code to the GPL 2.0+ /
- MIT
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Move code added by Vivek to the bcm-ns.dtsi which uses dual licensing.
-That syncs more Northstar code to be based on the same licensing schema.
-
-This code was added in the commit 37f6130ec39f ("ARM: dts: BCM5301X:
-Make USB 3.0 PHY use MDIO PHY driver").
-
-Cc: Vivek Unune <npcomplete13 at gmail.com>
-Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
-Acked-by: Vivek Unune <npcomplete13 at gmail.com>
-Link: https://lore.kernel.org/r/20230916085855.28375-1-zajec5@gmail.com
-Signed-off-by: Florian Fainelli <florian.fainelli at broadcom.com>
----
- arch/arm/boot/dts/broadcom/bcm-ns.dtsi | 27 ++++++++++++++++++++++++
- arch/arm/boot/dts/broadcom/bcm5301x.dtsi | 27 ------------------------
- 2 files changed, 27 insertions(+), 27 deletions(-)
-
---- a/arch/arm/boot/dts/bcm-ns.dtsi
-+++ b/arch/arm/boot/dts/bcm-ns.dtsi
-@@ -327,6 +327,29 @@
- #address-cells = <1>;
- };
-
-+ mdio-mux at 18003000 {
-+ compatible = "mdio-mux-mmioreg", "mdio-mux";
-+ mdio-parent-bus = <&mdio>;
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ reg = <0x18003000 0x4>;
-+ mux-mask = <0x200>;
-+
-+ mdio at 0 {
-+ reg = <0x0>;
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ usb3_phy: usb3-phy at 10 {
-+ compatible = "brcm,ns-ax-usb3-phy";
-+ reg = <0x10>;
-+ usb3-dmp-syscon = <&usb3_dmp>;
-+ #phy-cells = <0>;
-+ status = "disabled";
-+ };
-+ };
-+ };
-+
- rng: rng at 18004000 {
- compatible = "brcm,bcm5301x-rng";
- reg = <0x18004000 0x14>;
-@@ -467,6 +490,10 @@
- brcm,nand-has-wp;
- };
-
-+ usb3_dmp: syscon at 18105000 {
-+ reg = <0x18105000 0x1000>;
-+ };
-+
- thermal-zones {
- cpu_thermal: cpu-thermal {
- polling-delay-passive = <0>;
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -62,33 +62,6 @@
- };
- };
-
-- mdio-mux at 18003000 {
-- compatible = "mdio-mux-mmioreg", "mdio-mux";
-- mdio-parent-bus = <&mdio>;
-- #address-cells = <1>;
-- #size-cells = <0>;
-- reg = <0x18003000 0x4>;
-- mux-mask = <0x200>;
--
-- mdio at 0 {
-- reg = <0x0>;
-- #address-cells = <1>;
-- #size-cells = <0>;
--
-- usb3_phy: usb3-phy at 10 {
-- compatible = "brcm,ns-ax-usb3-phy";
-- reg = <0x10>;
-- usb3-dmp-syscon = <&usb3_dmp>;
-- #phy-cells = <0>;
-- status = "disabled";
-- };
-- };
-- };
--
-- usb3_dmp: syscon at 18105000 {
-- reg = <0x18105000 0x1000>;
-- };
--
- i2c0: i2c at 18009000 {
- compatible = "brcm,iproc-i2c";
- reg = <0x18009000 0x50>;
diff --git a/target/linux/bcm53xx/patches-6.1/033-v6.7-0005-ARM-dts-BCM5301X-Explicitly-disable-unused-switch-CP.patch b/target/linux/bcm53xx/patches-6.1/033-v6.7-0005-ARM-dts-BCM5301X-Explicitly-disable-unused-switch-CP.patch
deleted file mode 100644
index 72e5c6b061..0000000000
--- a/target/linux/bcm53xx/patches-6.1/033-v6.7-0005-ARM-dts-BCM5301X-Explicitly-disable-unused-switch-CP.patch
+++ /dev/null
@@ -1,377 +0,0 @@
-From 473baeab929444295b0530f8766e4becb6a08973 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal at milecki.pl>
-Date: Fri, 13 Oct 2023 12:33:13 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Explicitly disable unused switch CPU
- ports
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-When redescribing ports I assumed that missing "label" (like "cpu")
-means switch port isn't used. That was incorrect and I realized my
-change made Linux always use the first (5) CPU port (there are 3 of
-them).
-
-While above should technically be possible it often isn't correct:
-1. Non-default switch ports are often connected to Ethernet interfaces
- not fully covered by vendor setup (they may miss MACs)
-2. On some devices non-default ports require specifying fixed link
-
-This fixes network connectivity for some devices. It was reported &
-tested for Netgear R8000. It also affects Linksys EA9200 with its
-downstream DTS.
-
-Fixes: ba4aebce23b2 ("ARM: dts: BCM5301X: Describe switch ports in the main DTS")
-Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
-Link: https://lore.kernel.org/r/20231013103314.10306-1-zajec5@gmail.com
-Signed-off-by: Florian Fainelli <florian.fainelli at broadcom.com>
----
- .../dts/broadcom/bcm4708-buffalo-wzr-1166dhp-common.dtsi | 8 ++++++++
- arch/arm/boot/dts/broadcom/bcm4708-luxul-xap-1510.dts | 8 ++++++++
- arch/arm/boot/dts/broadcom/bcm4708-luxul-xwc-1000.dts | 8 ++++++++
- arch/arm/boot/dts/broadcom/bcm4708-netgear-r6250.dts | 8 ++++++++
- arch/arm/boot/dts/broadcom/bcm4708-smartrg-sr400ac.dts | 8 ++++++++
- .../boot/dts/broadcom/bcm47081-buffalo-wzr-600dhp2.dts | 8 ++++++++
- arch/arm/boot/dts/broadcom/bcm47081-luxul-xap-1410.dts | 8 ++++++++
- arch/arm/boot/dts/broadcom/bcm47081-luxul-xwr-1200.dts | 8 ++++++++
- arch/arm/boot/dts/broadcom/bcm4709-netgear-r8000.dts | 8 ++++++++
- arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-885l.dts | 8 ++++++++
- arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-890l.dts | 8 ++++++++
- arch/arm/boot/dts/broadcom/bcm47094-luxul-abr-4500.dts | 8 ++++++++
- arch/arm/boot/dts/broadcom/bcm47094-luxul-xap-1610.dts | 8 ++++++++
- arch/arm/boot/dts/broadcom/bcm47094-luxul-xbr-4500.dts | 8 ++++++++
- arch/arm/boot/dts/broadcom/bcm47094-luxul-xwc-2000.dts | 8 ++++++++
- arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3100.dts | 8 ++++++++
- arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3150-v1.dts | 8 ++++++++
- arch/arm/boot/dts/broadcom/bcm53015-meraki-mr26.dts | 8 ++++++++
- arch/arm/boot/dts/broadcom/bcm53016-meraki-mr32.dts | 8 ++++++++
- arch/arm/boot/dts/broadcom/bcm953012er.dts | 8 ++++++++
- 20 files changed, 160 insertions(+)
-
---- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi
-+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi
-@@ -181,5 +181,13 @@
- port at 5 {
- label = "cpu";
- };
-+
-+ port at 7 {
-+ status = "disabled";
-+ };
-+
-+ port at 8 {
-+ status = "disabled";
-+ };
- };
- };
---- a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
-+++ b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
-@@ -85,5 +85,13 @@
- port at 5 {
- label = "cpu";
- };
-+
-+ port at 7 {
-+ status = "disabled";
-+ };
-+
-+ port at 8 {
-+ status = "disabled";
-+ };
- };
- };
---- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
-+++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
-@@ -88,5 +88,13 @@
- port at 5 {
- label = "cpu";
- };
-+
-+ port at 7 {
-+ status = "disabled";
-+ };
-+
-+ port at 8 {
-+ status = "disabled";
-+ };
- };
- };
---- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-@@ -122,5 +122,13 @@
- port at 5 {
- label = "cpu";
- };
-+
-+ port at 7 {
-+ status = "disabled";
-+ };
-+
-+ port at 8 {
-+ status = "disabled";
-+ };
- };
- };
---- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
-+++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
-@@ -145,6 +145,14 @@
- port at 5 {
- label = "cpu";
- };
-+
-+ port at 7 {
-+ status = "disabled";
-+ };
-+
-+ port at 8 {
-+ status = "disabled";
-+ };
- };
- };
-
---- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
-+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
-@@ -145,5 +145,13 @@
- port at 5 {
- label = "cpu";
- };
-+
-+ port at 7 {
-+ status = "disabled";
-+ };
-+
-+ port at 8 {
-+ status = "disabled";
-+ };
- };
- };
---- a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
-+++ b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
-@@ -81,5 +81,13 @@
- port at 5 {
- label = "cpu";
- };
-+
-+ port at 7 {
-+ status = "disabled";
-+ };
-+
-+ port at 8 {
-+ status = "disabled";
-+ };
- };
- };
---- a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
-+++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
-@@ -148,5 +148,13 @@
- port at 5 {
- label = "cpu";
- };
-+
-+ port at 7 {
-+ status = "disabled";
-+ };
-+
-+ port at 8 {
-+ status = "disabled";
-+ };
- };
- };
---- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-@@ -227,6 +227,14 @@
- label = "wan";
- };
-
-+ port at 5 {
-+ status = "disabled";
-+ };
-+
-+ port at 7 {
-+ status = "disabled";
-+ };
-+
- port at 8 {
- label = "cpu";
- };
---- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
-+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
-@@ -160,6 +160,14 @@
- nvmem-cell-names = "mac-address";
- };
-
-+ port at 5 {
-+ status = "disabled";
-+ };
-+
-+ port at 7 {
-+ status = "disabled";
-+ };
-+
- port at 8 {
- label = "cpu";
- };
---- a/arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts
-+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts
-@@ -192,6 +192,14 @@
- label = "wan";
- };
-
-+ port at 5 {
-+ status = "disabled";
-+ };
-+
-+ port at 7 {
-+ status = "disabled";
-+ };
-+
- port at 8 {
- label = "cpu";
- phy-mode = "rgmii";
---- a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
-@@ -107,5 +107,13 @@
- port at 5 {
- label = "cpu";
- };
-+
-+ port at 7 {
-+ status = "disabled";
-+ };
-+
-+ port at 8 {
-+ status = "disabled";
-+ };
- };
- };
---- a/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts
-@@ -120,5 +120,13 @@
- port at 5 {
- label = "cpu";
- };
-+
-+ port at 7 {
-+ status = "disabled";
-+ };
-+
-+ port at 8 {
-+ status = "disabled";
-+ };
- };
- };
---- a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
-@@ -107,5 +107,13 @@
- port at 5 {
- label = "cpu";
- };
-+
-+ port at 7 {
-+ status = "disabled";
-+ };
-+
-+ port at 8 {
-+ status = "disabled";
-+ };
- };
- };
---- a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
-@@ -75,5 +75,13 @@
- port at 5 {
- label = "cpu";
- };
-+
-+ port at 7 {
-+ status = "disabled";
-+ };
-+
-+ port at 8 {
-+ status = "disabled";
-+ };
- };
- };
---- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
-@@ -147,5 +147,13 @@
- port at 5 {
- label = "cpu";
- };
-+
-+ port at 7 {
-+ status = "disabled";
-+ };
-+
-+ port at 8 {
-+ status = "disabled";
-+ };
- };
- };
---- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
-@@ -158,5 +158,13 @@
- port at 5 {
- label = "cpu";
- };
-+
-+ port at 7 {
-+ status = "disabled";
-+ };
-+
-+ port at 8 {
-+ status = "disabled";
-+ };
- };
- };
---- a/arch/arm/boot/dts/bcm53015-meraki-mr26.dts
-+++ b/arch/arm/boot/dts/bcm53015-meraki-mr26.dts
-@@ -124,6 +124,14 @@
- full-duplex;
- };
- };
-+
-+ port at 7 {
-+ status = "disabled";
-+ };
-+
-+ port at 8 {
-+ status = "disabled";
-+ };
- };
- };
-
---- a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
-+++ b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
-@@ -185,6 +185,14 @@
- full-duplex;
- };
- };
-+
-+ port at 7 {
-+ status = "disabled";
-+ };
-+
-+ port at 8 {
-+ status = "disabled";
-+ };
- };
- };
-
---- a/arch/arm/boot/dts/bcm953012er.dts
-+++ b/arch/arm/boot/dts/bcm953012er.dts
-@@ -84,6 +84,14 @@
- label = "cpu";
- ethernet = <&gmac0>;
- };
-+
-+ port at 7 {
-+ status = "disabled";
-+ };
-+
-+ port at 8 {
-+ status = "disabled";
-+ };
- };
- };
-
diff --git a/target/linux/bcm53xx/patches-6.1/033-v6.7-0006-ARM-dts-BCM5301X-Set-fixed-link-for-extra-Netgear-R8.patch b/target/linux/bcm53xx/patches-6.1/033-v6.7-0006-ARM-dts-BCM5301X-Set-fixed-link-for-extra-Netgear-R8.patch
deleted file mode 100644
index 0b2b7b36a3..0000000000
--- a/target/linux/bcm53xx/patches-6.1/033-v6.7-0006-ARM-dts-BCM5301X-Set-fixed-link-for-extra-Netgear-R8.patch
+++ /dev/null
@@ -1,47 +0,0 @@
-From d313b0e9070a7100ca55e64fe3b081d176d8806d Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal at milecki.pl>
-Date: Fri, 13 Oct 2023 12:33:14 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Set fixed-link for extra Netgear R8000
- CPU ports
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Ports 5 and 7 are disabled by default because the standard use case is
-for port 8 to manage all CPU directed traffic. For experimentation
-purposes however it is desirable to provide adequate properties such
-that people can experiment with using different ports without having to
-figure out their configuration. Some of the use cases include but are
-not limited to doubling or tripling the bandwidth by leveraging the
-additional ports/Ethernet MAC combinations.
-
-Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
-Link: https://lore.kernel.org/r/20231013103314.10306-2-zajec5@gmail.com
-Signed-off-by: Florian Fainelli <florian.fainelli at broadcom.com>
----
- arch/arm/boot/dts/broadcom/bcm4709-netgear-r8000.dts | 10 ++++++++++
- 1 file changed, 10 insertions(+)
-
---- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-@@ -229,10 +229,20 @@
-
- port at 5 {
- status = "disabled";
-+
-+ fixed-link {
-+ speed = <1000>;
-+ full-duplex;
-+ };
- };
-
- port at 7 {
- status = "disabled";
-+
-+ fixed-link {
-+ speed = <1000>;
-+ full-duplex;
-+ };
- };
-
- port at 8 {
diff --git a/target/linux/bcm53xx/patches-6.1/033-v6.7-0007-ARM-dts-BCM5301X-Set-switch-ports-for-Linksys-EA9200.patch b/target/linux/bcm53xx/patches-6.1/033-v6.7-0007-ARM-dts-BCM5301X-Set-switch-ports-for-Linksys-EA9200.patch
deleted file mode 100644
index 4528c95a5a..0000000000
--- a/target/linux/bcm53xx/patches-6.1/033-v6.7-0007-ARM-dts-BCM5301X-Set-switch-ports-for-Linksys-EA9200.patch
+++ /dev/null
@@ -1,63 +0,0 @@
-From 253358f373492608348136e569366d73cb969f6a Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal at milecki.pl>
-Date: Tue, 24 Oct 2023 09:26:05 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Set switch ports for Linksys EA9200
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This patch was developed as OpenWrt downstream change and was recently
-confirmed to work as expected.
-
-Tested-by: Rani Hod <rani.hod at gmail.com>
-Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
-Link: https://lore.kernel.org/r/20231024072605.32517-1-zajec5@gmail.com
-Signed-off-by: Florian Fainelli <florian.fainelli at broadcom.com>
----
- .../dts/broadcom/bcm4709-linksys-ea9200.dts | 38 +++++++++++++++++++
- 1 file changed, 38 insertions(+)
-
---- a/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
-+++ b/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
-@@ -47,3 +47,41 @@
- &usb3_phy {
- status = "okay";
- };
-+
-+&srab {
-+ status = "okay";
-+
-+ ports {
-+ port at 0 {
-+ label = "lan1";
-+ };
-+
-+ port at 1 {
-+ label = "lan2";
-+ };
-+
-+ port at 2 {
-+ label = "lan3";
-+ };
-+
-+ port at 3 {
-+ label = "lan4";
-+ };
-+
-+ port at 4 {
-+ label = "wan";
-+ };
-+
-+ port at 5 {
-+ status = "disabled";
-+ };
-+
-+ port at 7 {
-+ status = "disabled";
-+ };
-+
-+ port at 8 {
-+ label = "cpu";
-+ };
-+ };
-+};
diff --git a/target/linux/bcm53xx/patches-6.1/080-v6.2-bcma-support-SPROM-rev-11.patch b/target/linux/bcm53xx/patches-6.1/080-v6.2-bcma-support-SPROM-rev-11.patch
deleted file mode 100644
index 5ebc78ca20..0000000000
--- a/target/linux/bcm53xx/patches-6.1/080-v6.2-bcma-support-SPROM-rev-11.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From b9457a04eb89645049fdf427c13e6a18d5501895 Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij at linaro.org>
-Date: Tue, 11 Oct 2022 14:24:40 +0200
-Subject: [PATCH] bcma: support SPROM rev 11
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Rev 11 works fine for me to set the MAC address of gmac0 and
-gmac1 in the D-Link DWL-8610AP.
-
-Cc: Rafał Miłecki <zajec5 at gmail.com>
-Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
----
- drivers/bcma/sprom.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/bcma/sprom.c
-+++ b/drivers/bcma/sprom.c
-@@ -170,7 +170,7 @@ static int bcma_sprom_valid(struct bcma_
- return err;
-
- revision = sprom[words - 1] & SSB_SPROM_REVISION_REV;
-- if (revision != 8 && revision != 9 && revision != 10) {
-+ if (revision < 8 || revision > 11) {
- pr_err("Unsupported SPROM revision: %d\n", revision);
- return -ENOENT;
- }
diff --git a/target/linux/bcm53xx/patches-6.1/140-mtd-parsers-trx-parse-firmware-MTD-partitions-only.patch b/target/linux/bcm53xx/patches-6.1/140-mtd-parsers-trx-parse-firmware-MTD-partitions-only.patch
deleted file mode 100644
index e1933e75c7..0000000000
--- a/target/linux/bcm53xx/patches-6.1/140-mtd-parsers-trx-parse-firmware-MTD-partitions-only.patch
+++ /dev/null
@@ -1,43 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal at milecki.pl>
-Date: Tue, 13 Apr 2021 18:25:20 +0200
-Subject: [PATCH] mtd: parsers: trx: parse "firmware" MTD partitions only
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Parsing every partition with "compatible" set to "brcm,trx" results in
-parsing both: firmware partition and failsafe partition on devices that
-implement failsafe booting. This affects e.g. Linksys EA9500 which has:
-
-partition at 200000 {
- reg = <0x0200000 0x01d00000>;
- compatible = "linksys,ns-firmware", "brcm,trx";
-};
-
-partition at 1f00000 {
- reg = <0x01f00000 0x01d00000>;
- compatible = "linksys,ns-firmware", "brcm,trx";
-};
-
-Check for MTD partition name "firmware" before parsing. Recently added
-ofpart_linksys_ns.c creates "firmware" and "failsafe" depending on
-bootloader setup.
-
-Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
----
- drivers/mtd/parsers/parser_trx.c | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/drivers/mtd/parsers/parser_trx.c
-+++ b/drivers/mtd/parsers/parser_trx.c
-@@ -92,6 +92,10 @@ static int parser_trx_parse(struct mtd_i
- if (err != 0 && err != -EINVAL)
- pr_err("failed to parse \"brcm,trx-magic\" DT attribute, using default: %d\n", err);
-
-+ /* Don't parse any failsafe / backup partitions */
-+ if (strcmp(mtd->name, "firmware"))
-+ return -EINVAL;
-+
- parts = kcalloc(TRX_PARSER_MAX_PARTS, sizeof(struct mtd_partition),
- GFP_KERNEL);
- if (!parts)
diff --git a/target/linux/bcm53xx/patches-6.1/180-usb-xhci-add-support-for-performing-fake-doorbell.patch b/target/linux/bcm53xx/patches-6.1/180-usb-xhci-add-support-for-performing-fake-doorbell.patch
deleted file mode 100644
index ac5a48283d..0000000000
--- a/target/linux/bcm53xx/patches-6.1/180-usb-xhci-add-support-for-performing-fake-doorbell.patch
+++ /dev/null
@@ -1,118 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal at milecki.pl>
-Date: Sat, 1 Oct 2016 22:54:48 +0200
-Subject: [PATCH] usb: xhci: add support for performing fake doorbell
-
-Broadcom's Northstar XHCI controllers seem to need a special start
-procedure to work correctly. There isn't any official documentation of
-this, the problem is that controller doesn't detect any connected
-devices with default setup. Moreover connecting USB device to controller
-that doesn't run properly can cause SoC's watchdog issues.
-
-A workaround that was successfully tested on multiple devices is to
-perform a fake doorbell. This patch adds code for doing this and enables
-it on BCM4708 family.
----
- drivers/usb/host/xhci-plat.c | 6 +++++
- drivers/usb/host/xhci.c | 63 +++++++++++++++++++++++++++++++++++++++++---
- drivers/usb/host/xhci.h | 1 +
- 3 files changed, 67 insertions(+), 3 deletions(-)
-
---- a/drivers/usb/host/xhci-plat.c
-+++ b/drivers/usb/host/xhci-plat.c
-@@ -77,6 +77,8 @@ static int xhci_priv_resume_quirk(struct
- static void xhci_plat_quirks(struct device *dev, struct xhci_hcd *xhci)
- {
- struct xhci_plat_priv *priv = xhci_to_priv(xhci);
-+ struct platform_device*pdev = to_platform_device(dev);
-+ struct device_node *node = pdev->dev.of_node;
-
- /*
- * As of now platform drivers don't provide MSI support so we ensure
-@@ -84,6 +86,9 @@ static void xhci_plat_quirks(struct devi
- * dev struct in order to setup MSI
- */
- xhci->quirks |= XHCI_PLAT | priv->quirks;
-+
-+ if (node && of_machine_is_compatible("brcm,bcm4708"))
-+ xhci->quirks |= XHCI_FAKE_DOORBELL;
- }
-
- /* called during probe() after chip reset completes */
---- a/drivers/usb/host/xhci.c
-+++ b/drivers/usb/host/xhci.c
-@@ -161,6 +161,49 @@ int xhci_start(struct xhci_hcd *xhci)
- return ret;
- }
-
-+/**
-+ * xhci_fake_doorbell - Perform a fake doorbell on a specified slot
-+ *
-+ * Some controllers require a fake doorbell to start correctly. Without that
-+ * they simply don't detect any devices.
-+ */
-+static int xhci_fake_doorbell(struct xhci_hcd *xhci, int slot_id)
-+{
-+ u32 temp;
-+
-+ /* Alloc a virt device for that slot */
-+ if (!xhci_alloc_virt_device(xhci, slot_id, NULL, GFP_NOIO)) {
-+ xhci_warn(xhci, "Could not allocate xHCI USB device data structures\n");
-+ return -ENOMEM;
-+ }
-+
-+ /* Ring fake doorbell for slot_id ep 0 */
-+ xhci_ring_ep_doorbell(xhci, slot_id, 0, 0);
-+ usleep_range(1000, 1500);
-+
-+ /* Read the status to check if HSE is set or not */
-+ temp = readl(&xhci->op_regs->status);
-+
-+ /* Clear HSE if set */
-+ if (temp & STS_FATAL) {
-+ xhci_dbg(xhci, "HSE problem detected, status: 0x%08x\n", temp);
-+ temp &= ~0x1fff;
-+ temp |= STS_FATAL;
-+ writel(temp, &xhci->op_regs->status);
-+ usleep_range(1000, 1500);
-+ readl(&xhci->op_regs->status);
-+ }
-+
-+ /* Free virt device */
-+ xhci_free_virt_device(xhci, slot_id);
-+
-+ /* We're done if controller is already running */
-+ if (readl(&xhci->op_regs->command) & CMD_RUN)
-+ return 0;
-+
-+ return xhci_start(xhci);
-+}
-+
- /*
- * Reset a halted HC.
- *
-@@ -641,6 +684,15 @@ static int xhci_run_finished(struct xhci
- return -ENODEV;
- }
-
-+ if (xhci->quirks & XHCI_FAKE_DOORBELL) {
-+ int err = xhci_fake_doorbell(xhci, 1);
-+ if (err) {
-+ xhci_halt(xhci);
-+ spin_unlock_irqrestore(&xhci->lock, flags);
-+ return err;
-+ }
-+ }
-+
- xhci->cmd_ring_state = CMD_RING_STATE_RUNNING;
-
- if (xhci->quirks & XHCI_NEC_HOST)
---- a/drivers/usb/host/xhci.h
-+++ b/drivers/usb/host/xhci.h
-@@ -1908,6 +1908,7 @@ struct xhci_hcd {
- #define XHCI_RESET_TO_DEFAULT BIT_ULL(44)
- #define XHCI_ZHAOXIN_TRB_FETCH BIT_ULL(45)
- #define XHCI_ZHAOXIN_HOST BIT_ULL(46)
-+#define XHCI_FAKE_DOORBELL BIT_ULL(47)
-
- unsigned int num_active_eps;
- unsigned int limit_active_eps;
diff --git a/target/linux/bcm53xx/patches-6.1/300-ARM-BCM5301X-Disable-MMU-and-Dcache-during-decompres.patch b/target/linux/bcm53xx/patches-6.1/300-ARM-BCM5301X-Disable-MMU-and-Dcache-during-decompres.patch
deleted file mode 100644
index 034d5b52fc..0000000000
--- a/target/linux/bcm53xx/patches-6.1/300-ARM-BCM5301X-Disable-MMU-and-Dcache-during-decompres.patch
+++ /dev/null
@@ -1,101 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal at milecki.pl>
-Date: Wed, 24 Sep 2014 22:14:07 +0200
-Subject: [PATCH] ARM: BCM5301X: Disable MMU and Dcache during decompression
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Broadcom devices have broken CFE (bootloader) that leaves hardware in an
-invalid state. It causes problems with booting Linux. On Northstar
-devices kernel was randomly hanging in ~25% of tries during early init.
-Hangs used to happen at random places in the start_kernel. On BCM53573
-kernel doesn't even seem to start booting.
-
-To workaround this problem we need to do following very early:
-1) Clear 2 following bits in the SCTLR register:
-#define CR_M (1 << 0) /* MMU enable */
-#define CR_C (1 << 2) /* Dcache enable */
-2) Flush the whole D-cache
-3) Disable L2 cache
-
-Unfortunately this patch is not upstreamable as it does above things
-unconditionally. We can't check if we are running on Broadcom platform
-in any safe way and doing such hacks with ARCH_MULTI_V7 is unacceptable
-as it could break other devices support.
-
-Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
----
-
---- a/arch/arm/boot/compressed/Makefile
-+++ b/arch/arm/boot/compressed/Makefile
-@@ -35,6 +35,11 @@ ifeq ($(CONFIG_ARCH_ACORN),y)
- OBJS += ll_char_wr.o font.o
- endif
-
-+ifeq ($(CONFIG_ARCH_BCM_5301X),y)
-+OBJS += head-bcm_5301x-mpcore.o
-+OBJS += cache-v7-min.o
-+endif
-+
- ifeq ($(CONFIG_ARCH_SA1100),y)
- OBJS += head-sa1100.o
- endif
---- /dev/null
-+++ b/arch/arm/boot/compressed/head-bcm_5301x-mpcore.S
-@@ -0,0 +1,37 @@
-+/*
-+ *
-+ * Platform specific tweaks. This is merged into head.S by the linker.
-+ *
-+ */
-+
-+#include <linux/linkage.h>
-+#include <asm/assembler.h>
-+#include <asm/cp15.h>
-+
-+ .section ".start", "ax"
-+
-+/*
-+ * This code section is spliced into the head code by the linker
-+ */
-+
-+__plat_uncompress_start:
-+
-+ @ Preserve r8/r7 i.e. kernel entry values
-+ mov r12, r8
-+
-+ @ Clear MMU enable and Dcache enable bits
-+ mrc p15, 0, r0, c1, c0, 0 @ Read SCTLR
-+ bic r0, #CR_C|CR_M
-+ mcr p15, 0, r0, c1, c0, 0 @ Write SCTLR
-+ nop
-+
-+ @ Call the cache invalidation routine
-+ bl v7_flush_dcache_all
-+ nop
-+ mov r0,#0
-+ ldr r3, =0x19022000 @ L2 cache controller, control reg
-+ str r0, [r3, #0x100] @ Disable L2 cache
-+ nop
-+
-+ @ Restore
-+ mov r8, r12
---- a/arch/arm/boot/compressed/cache-v7-min.S
-+++ b/arch/arm/boot/compressed/cache-v7-min.S
-@@ -12,6 +12,7 @@
-
- #include <linux/linkage.h>
- #include <linux/init.h>
-+#include <asm/assembler.h>
-
- __INIT
-
-@@ -63,7 +64,7 @@ loop2:
- ARM( orr r11, r11, r9, lsl r2 ) @ factor index number into r11
- THUMB( lsl r6, r9, r2 )
- THUMB( orr r11, r11, r6 ) @ factor index number into r11
-- mcr p15, 0, r11, c7, c14, 2 @ clean & invalidate by set/way
-+ mcr p15, 0, r11, c7, c6, 2 @ clean & invalidate by set/way
- subs r9, r9, #1 @ decrement the index
- bge loop2
- subs r4, r4, #1 @ decrement the way
diff --git a/target/linux/bcm53xx/patches-6.1/304-ARM-dts-BCM5301X-Specify-switch-ports-for-remaining-.patch b/target/linux/bcm53xx/patches-6.1/304-ARM-dts-BCM5301X-Specify-switch-ports-for-remaining-.patch
deleted file mode 100644
index 8039831a78..0000000000
--- a/target/linux/bcm53xx/patches-6.1/304-ARM-dts-BCM5301X-Specify-switch-ports-for-remaining-.patch
+++ /dev/null
@@ -1,675 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal at milecki.pl>
-Subject: [PATCH] ARM: dts: BCM5301X: Specify switch ports for remaining
- devices
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
----
-
---- a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
-+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
-@@ -92,3 +92,41 @@
- &usb3_phy {
- status = "okay";
- };
-+
-+&srab {
-+ status = "okay";
-+
-+ ports {
-+ port at 0 {
-+ label = "lan1";
-+ };
-+
-+ port at 1 {
-+ label = "lan2";
-+ };
-+
-+ port at 2 {
-+ label = "lan3";
-+ };
-+
-+ port at 3 {
-+ label = "lan4";
-+ };
-+
-+ port at 4 {
-+ label = "wan";
-+ };
-+
-+ port at 5 {
-+ label = "cpu";
-+ };
-+
-+ port at 7 {
-+ status = "disabled";
-+ };
-+
-+ port at 8 {
-+ status = "disabled";
-+ };
-+ };
-+};
---- a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
-+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
-@@ -83,3 +83,41 @@
- &usb3_phy {
- status = "okay";
- };
-+
-+&srab {
-+ status = "okay";
-+
-+ ports {
-+ port at 0 {
-+ label = "wan";
-+ };
-+
-+ port at 1 {
-+ label = "lan1";
-+ };
-+
-+ port at 2 {
-+ label = "lan2";
-+ };
-+
-+ port at 3 {
-+ label = "lan3";
-+ };
-+
-+ port at 4 {
-+ label = "lan4";
-+ };
-+
-+ port at 5 {
-+ label = "cpu";
-+ };
-+
-+ port at 7 {
-+ status = "disabled";
-+ };
-+
-+ port at 8 {
-+ status = "disabled";
-+ };
-+ };
-+};
---- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-@@ -149,3 +149,41 @@
- &usb3_phy {
- status = "okay";
- };
-+
-+&srab {
-+ status = "okay";
-+
-+ ports {
-+ port at 0 {
-+ label = "lan1";
-+ };
-+
-+ port at 1 {
-+ label = "lan2";
-+ };
-+
-+ port at 2 {
-+ label = "lan3";
-+ };
-+
-+ port at 3 {
-+ label = "lan4";
-+ };
-+
-+ port at 4 {
-+ label = "wan";
-+ };
-+
-+ port at 5 {
-+ label = "cpu";
-+ };
-+
-+ port at 7 {
-+ status = "disabled";
-+ };
-+
-+ port at 8 {
-+ status = "disabled";
-+ };
-+ };
-+};
---- a/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts
-+++ b/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts
-@@ -46,3 +46,41 @@
- &usb3_phy {
- status = "okay";
- };
-+
-+&srab {
-+ status = "okay";
-+
-+ ports {
-+ port at 0 {
-+ label = "lan1";
-+ };
-+
-+ port at 1 {
-+ label = "lan2";
-+ };
-+
-+ port at 2 {
-+ label = "lan3";
-+ };
-+
-+ port at 3 {
-+ label = "lan4";
-+ };
-+
-+ port at 4 {
-+ label = "wan";
-+ };
-+
-+ port at 5 {
-+ label = "cpu";
-+ };
-+
-+ port at 7 {
-+ status = "disabled";
-+ };
-+
-+ port at 8 {
-+ status = "disabled";
-+ };
-+ };
-+};
---- a/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts
-+++ b/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts
-@@ -43,3 +43,41 @@
- &usb3_phy {
- status = "okay";
- };
-+
-+&srab {
-+ status = "okay";
-+
-+ ports {
-+ port at 0 {
-+ label = "lan1";
-+ };
-+
-+ port at 1 {
-+ label = "lan2";
-+ };
-+
-+ port at 2 {
-+ label = "lan3";
-+ };
-+
-+ port at 3 {
-+ label = "lan4";
-+ };
-+
-+ port at 4 {
-+ label = "wan";
-+ };
-+
-+ port at 5 {
-+ label = "cpu";
-+ };
-+
-+ port at 7 {
-+ status = "disabled";
-+ };
-+
-+ port at 8 {
-+ status = "disabled";
-+ };
-+ };
-+};
---- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
-+++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
-@@ -86,3 +86,41 @@
- &usb3_phy {
- status = "okay";
- };
-+
-+&srab {
-+ status = "okay";
-+
-+ ports {
-+ port at 0 {
-+ label = "lan1";
-+ };
-+
-+ port at 1 {
-+ label = "lan2";
-+ };
-+
-+ port at 2 {
-+ label = "lan3";
-+ };
-+
-+ port at 3 {
-+ label = "lan4";
-+ };
-+
-+ port at 4 {
-+ label = "wan";
-+ };
-+
-+ port at 5 {
-+ label = "cpu";
-+ };
-+
-+ port at 7 {
-+ status = "disabled";
-+ };
-+
-+ port at 8 {
-+ status = "disabled";
-+ };
-+ };
-+};
---- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
-+++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
-@@ -77,3 +77,41 @@
- &usb3_phy {
- status = "okay";
- };
-+
-+&srab {
-+ status = "okay";
-+
-+ ports {
-+ port at 0 {
-+ label = "wan";
-+ };
-+
-+ port at 1 {
-+ label = "lan1";
-+ };
-+
-+ port at 2 {
-+ label = "lan2";
-+ };
-+
-+ port at 3 {
-+ label = "lan3";
-+ };
-+
-+ port at 4 {
-+ label = "lan4";
-+ };
-+
-+ port at 5 {
-+ label = "cpu";
-+ };
-+
-+ port at 7 {
-+ status = "disabled";
-+ };
-+
-+ port at 8 {
-+ status = "disabled";
-+ };
-+ };
-+};
---- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
-+++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
-@@ -77,6 +77,40 @@
- status = "okay";
- };
-
-+&srab {
-+ status = "okay";
-+
-+ ports {
-+ port at 0 {
-+ label = "wan";
-+ };
-+
-+ port at 1 {
-+ label = "lan1";
-+ };
-+
-+ port at 2 {
-+ label = "lan2";
-+ };
-+
-+ port at 3 {
-+ label = "lan3";
-+ };
-+
-+ port at 5 {
-+ status = "disabled";
-+ };
-+
-+ port at 7 {
-+ label = "cpu";
-+ };
-+
-+ port at 8 {
-+ status = "disabled";
-+ };
-+ };
-+};
-+
- &nandcs {
- partitions {
- compatible = "fixed-partitions";
---- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
-+++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
-@@ -130,3 +130,41 @@
- &usb3_phy {
- status = "okay";
- };
-+
-+&srab {
-+ status = "okay";
-+
-+ ports {
-+ port at 0 {
-+ label = "lan1";
-+ };
-+
-+ port at 1 {
-+ label = "lan2";
-+ };
-+
-+ port at 2 {
-+ label = "lan3";
-+ };
-+
-+ port at 3 {
-+ label = "lan4";
-+ };
-+
-+ port at 4 {
-+ label = "wan";
-+ };
-+
-+ port at 5 {
-+ label = "cpu";
-+ };
-+
-+ port at 7 {
-+ status = "disabled";
-+ };
-+
-+ port at 8 {
-+ status = "disabled";
-+ };
-+ };
-+};
---- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
-+++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
-@@ -104,3 +104,41 @@
- &usb3_phy {
- status = "okay";
- };
-+
-+&srab {
-+ status = "okay";
-+
-+ ports {
-+ port at 0 {
-+ label = "wan";
-+ };
-+
-+ port at 1 {
-+ label = "lan1";
-+ };
-+
-+ port at 2 {
-+ label = "lan2";
-+ };
-+
-+ port at 3 {
-+ label = "lan3";
-+ };
-+
-+ port at 4 {
-+ label = "lan4";
-+ };
-+
-+ port at 5 {
-+ label = "cpu";
-+ };
-+
-+ port at 7 {
-+ status = "disabled";
-+ };
-+
-+ port at 8 {
-+ status = "disabled";
-+ };
-+ };
-+};
---- a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
-+++ b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
-@@ -94,3 +94,41 @@
- &usb3_phy {
- status = "okay";
- };
-+
-+&srab {
-+ status = "okay";
-+
-+ ports {
-+ port at 0 {
-+ label = "wan";
-+ };
-+
-+ port at 1 {
-+ label = "lan1";
-+ };
-+
-+ port at 2 {
-+ label = "lan2";
-+ };
-+
-+ port at 3 {
-+ label = "lan3";
-+ };
-+
-+ port at 4 {
-+ label = "lan4";
-+ };
-+
-+ port at 5 {
-+ status = "disabled";
-+ };
-+
-+ port at 7 {
-+ status = "disabled";
-+ };
-+
-+ port at 8 {
-+ label = "cpu";
-+ };
-+ };
-+};
---- a/arch/arm/boot/dts/bcm47094-phicomm-k3.dts
-+++ b/arch/arm/boot/dts/bcm47094-phicomm-k3.dts
-@@ -38,6 +38,40 @@
- status = "okay";
- };
-
-+&srab {
-+ status = "okay";
-+
-+ ports {
-+ port at 0 {
-+ label = "lan1";
-+ };
-+
-+ port at 1 {
-+ label = "lan2";
-+ };
-+
-+ port at 2 {
-+ label = "lan3";
-+ };
-+
-+ port at 3 {
-+ label = "wan";
-+ };
-+
-+ port at 5 {
-+ label = "cpu";
-+ };
-+
-+ port at 7 {
-+ status = "disabled";
-+ };
-+
-+ port at 8 {
-+ status = "disabled";
-+ };
-+ };
-+};
-+
- &nandcs {
- partitions {
- compatible = "fixed-partitions";
---- a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
-+++ b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
-@@ -91,6 +91,44 @@
- };
- };
-
-+&srab {
-+ status = "okay";
-+
-+ ports {
-+ port at 0 {
-+ label = "wan";
-+ };
-+
-+ port at 1 {
-+ label = "lan1";
-+ };
-+
-+ port at 2 {
-+ label = "lan2";
-+ };
-+
-+ port at 3 {
-+ label = "lan3";
-+ };
-+
-+ port at 4 {
-+ label = "lan4";
-+ };
-+
-+ port at 5 {
-+ label = "cpu";
-+ };
-+
-+ port at 7 {
-+ status = "disabled";
-+ };
-+
-+ port at 8 {
-+ status = "disabled";
-+ };
-+ };
-+};
-+
- &spi_nor {
- status = "okay";
-
---- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
-+++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
-@@ -100,6 +100,44 @@
- vcc-gpio = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
- };
-
-+&srab {
-+ status = "okay";
-+
-+ ports {
-+ port at 0 {
-+ label = "wan";
-+ };
-+
-+ port at 1 {
-+ label = "lan1";
-+ };
-+
-+ port at 2 {
-+ label = "lan2";
-+ };
-+
-+ port at 3 {
-+ label = "lan3";
-+ };
-+
-+ port at 4 {
-+ label = "lan4";
-+ };
-+
-+ port at 5 {
-+ label = "cpu";
-+ };
-+
-+ port at 7 {
-+ status = "disabled";
-+ };
-+
-+ port at 8 {
-+ status = "disabled";
-+ };
-+ };
-+};
-+
- &spi_nor {
- status = "okay";
-
---- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
-+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
-@@ -107,3 +107,42 @@
- &usb3_phy {
- status = "okay";
- };
-+
-+&srab {
-+ status = "okay";
-+
-+ ports {
-+ port at 0 {
-+ label = "lan1";
-+ };
-+
-+ port at 1 {
-+ label = "lan2";
-+ };
-+
-+ port at 2 {
-+ label = "lan3";
-+ };
-+
-+ port at 3 {
-+ label = "lan4";
-+ };
-+
-+ port at 4 {
-+ label = "wan";
-+ };
-+
-+ port at 5 {
-+ label = "cpu";
-+ };
-+
-+ port at 7 {
-+ status = "disabled";
-+ };
-+
-+ port at 8 {
-+ status = "disabled";
-+ };
-+ };
-+};
-+
diff --git a/target/linux/bcm53xx/patches-6.1/310-ARM-BCM5301X-Add-DT-for-Netgear-R7900.patch b/target/linux/bcm53xx/patches-6.1/310-ARM-BCM5301X-Add-DT-for-Netgear-R7900.patch
deleted file mode 100644
index 773c3e9be6..0000000000
--- a/target/linux/bcm53xx/patches-6.1/310-ARM-BCM5301X-Add-DT-for-Netgear-R7900.patch
+++ /dev/null
@@ -1,64 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5 at gmail.com>
-Subject: [PATCH] ARM: BCM5301X: Add DT for Netgear R7900
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <zajec5 at gmail.com>
----
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -125,6 +125,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- bcm4709-buffalo-wxr-1900dhp.dtb \
- bcm4709-linksys-ea9200.dtb \
- bcm4709-netgear-r7000.dtb \
-+ bcm4709-netgear-r7900.dtb \
- bcm4709-netgear-r8000.dtb \
- bcm4709-tplink-archer-c9-v1.dtb \
- bcm47094-asus-rt-ac3100.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm4709-netgear-r7900.dts
-@@ -0,0 +1,42 @@
-+/*
-+ * Broadcom BCM470X / BCM5301X ARM platform code.
-+ * DTS for Netgear R7900
-+ *
-+ * Copyright (C) 2016 Rafał Miłecki <zajec5 at gmail.com>
-+ *
-+ * Licensed under the GNU/GPL. See COPYING for details.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm4709.dtsi"
-+#include "bcm5301x-nand-cs0-bch8.dtsi"
-+
-+/ {
-+ compatible = "netgear,r7900", "brcm,bcm4709", "brcm,bcm4708";
-+ model = "Netgear R7900";
-+
-+ chosen {
-+ bootargs = "console=ttyS0,115200";
-+ };
-+
-+ memory {
-+ reg = <0x00000000 0x08000000
-+ 0x88000000 0x08000000>;
-+ };
-+
-+ axi at 18000000 {
-+ usb3 at 23000 {
-+ reg = <0x00023000 0x1000>;
-+
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
-+ };
-+ };
-+};
-+
-+&uart0 {
-+ status = "okay";
-+};
diff --git a/target/linux/bcm53xx/patches-6.1/500-UBI-Detect-EOF-mark-and-erase-all-remaining-blocks.patch b/target/linux/bcm53xx/patches-6.1/500-UBI-Detect-EOF-mark-and-erase-all-remaining-blocks.patch
deleted file mode 100644
index e6140d9a70..0000000000
--- a/target/linux/bcm53xx/patches-6.1/500-UBI-Detect-EOF-mark-and-erase-all-remaining-blocks.patch
+++ /dev/null
@@ -1,59 +0,0 @@
-From 2a2af518266a29323cf30c3f9ba9ef2ceb1dd84b Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5 at gmail.com>
-Date: Thu, 16 Oct 2014 20:52:16 +0200
-Subject: [PATCH] UBI: Detect EOF mark and erase all remaining blocks
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <zajec5 at gmail.com>
----
- drivers/mtd/ubi/attach.c | 5 +++++
- drivers/mtd/ubi/io.c | 4 ++++
- drivers/mtd/ubi/ubi.h | 1 +
- 3 files changed, 10 insertions(+)
-
---- a/drivers/mtd/ubi/attach.c
-+++ b/drivers/mtd/ubi/attach.c
-@@ -82,6 +82,9 @@ static int self_check_ai(struct ubi_devi
- #define AV_ADD BIT(1)
- #define AV_FIND_OR_ADD (AV_FIND | AV_ADD)
-
-+/* Set on finding block with 0xdeadc0de, indicates erasing all blocks behind */
-+bool erase_all_next;
-+
- /**
- * find_or_add_av - internal function to find a volume, add a volume or do
- * both (find and add if missing).
-@@ -1580,6 +1583,8 @@ int ubi_attach(struct ubi_device *ubi, i
- if (!ai)
- return -ENOMEM;
-
-+ erase_all_next = false;
-+
- #ifdef CONFIG_MTD_UBI_FASTMAP
- /* On small flash devices we disable fastmap in any case. */
- if ((int)mtd_div_by_eb(ubi->mtd->size, ubi->mtd) <= UBI_FM_MAX_START) {
---- a/drivers/mtd/ubi/io.c
-+++ b/drivers/mtd/ubi/io.c
-@@ -717,6 +717,10 @@ int ubi_io_read_ec_hdr(struct ubi_device
- }
-
- magic = be32_to_cpu(ec_hdr->magic);
-+ if (magic == 0xdeadc0de)
-+ erase_all_next = true;
-+ if (erase_all_next)
-+ return read_err ? UBI_IO_FF_BITFLIPS : UBI_IO_FF;
- if (magic != UBI_EC_HDR_MAGIC) {
- if (mtd_is_eccerr(read_err))
- return UBI_IO_BAD_HDR_EBADMSG;
---- a/drivers/mtd/ubi/ubi.h
-+++ b/drivers/mtd/ubi/ubi.h
-@@ -822,6 +822,7 @@ extern struct mutex ubi_devices_mutex;
- extern struct blocking_notifier_head ubi_notifiers;
-
- /* attach.c */
-+extern bool erase_all_next;
- struct ubi_ainf_peb *ubi_alloc_aeb(struct ubi_attach_info *ai, int pnum,
- int ec);
- void ubi_free_aeb(struct ubi_attach_info *ai, struct ubi_ainf_peb *aeb);
diff --git a/target/linux/bcm53xx/patches-6.1/600-net-disable-GRO-by-default.patch b/target/linux/bcm53xx/patches-6.1/600-net-disable-GRO-by-default.patch
deleted file mode 100644
index 9fa41a4b7e..0000000000
--- a/target/linux/bcm53xx/patches-6.1/600-net-disable-GRO-by-default.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal at milecki.pl>
-Date: Mon, 20 Jun 2022 10:01:18 +0200
-Subject: [PATCH] net: disable GRO by default
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-In many cases GRO improves network performance however it comes at a
-cost of chacksums calculations. In case of slow CPU and missing hardware
-csum calculation support GRO can actually decrease network speed.
-
-On BCM4708 *disabling* GRO results in following NAT masquarade speed
-changes:
-1. 364 Mb/s → 396 Mb/s (packet steering disabled)
-2. 341 Mb/s → 566 Mb/s (packet steering enabled)
-
-Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
----
- include/linux/netdev_features.h | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/include/linux/netdev_features.h
-+++ b/include/linux/netdev_features.h
-@@ -242,10 +242,10 @@ static inline int find_next_netdev_featu
- #define NETIF_F_UPPER_DISABLES NETIF_F_LRO
-
- /* changeable features with no special hardware requirements */
--#define NETIF_F_SOFT_FEATURES (NETIF_F_GSO | NETIF_F_GRO | NETIF_F_GRO_FRAGLIST)
-+#define NETIF_F_SOFT_FEATURES (NETIF_F_GSO)
-
- /* Changeable features with no special hardware requirements that defaults to off. */
--#define NETIF_F_SOFT_FEATURES_OFF (NETIF_F_GRO_UDP_FWD)
-+#define NETIF_F_SOFT_FEATURES_OFF (NETIF_F_GRO_UDP_FWD | NETIF_F_GRO | NETIF_F_GRO_FRAGLIST)
-
- #define NETIF_F_VLAN_FEATURES (NETIF_F_HW_VLAN_CTAG_FILTER | \
- NETIF_F_HW_VLAN_CTAG_RX | \
diff --git a/target/linux/bcm53xx/patches-6.1/700-bgmac-reduce-max-frame-size-to-support-just-MTU-1500.patch b/target/linux/bcm53xx/patches-6.1/700-bgmac-reduce-max-frame-size-to-support-just-MTU-1500.patch
deleted file mode 100644
index 3a2f4b06ed..0000000000
--- a/target/linux/bcm53xx/patches-6.1/700-bgmac-reduce-max-frame-size-to-support-just-MTU-1500.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal at milecki.pl>
-Date: Fri, 10 Jun 2022 13:10:47 +0200
-Subject: [PATCH] bgmac: reduce max frame size to support just MTU 1500
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-bgmac allocates new replacement buffer before handling each received
-frame. Allocating & DMA-preparing 9724 B each time consumes a lot of CPU
-time. Ideally bgmac should just respect currently set MTU but it isn't
-the case right now. For now just revert back to the old limited frame
-size.
-
-This change bumps NAT masquarade speed by ~95%.
-
-Ref: 8c7da63978f1 ("bgmac: configure MTU and add support for frames beyond 8192 byte size")
-Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
----
- drivers/net/ethernet/broadcom/bgmac.h | 3 +--
- 1 file changed, 1 insertion(+), 2 deletions(-)
-
---- a/drivers/net/ethernet/broadcom/bgmac.h
-+++ b/drivers/net/ethernet/broadcom/bgmac.h
-@@ -328,8 +328,7 @@
- #define BGMAC_RX_FRAME_OFFSET 30 /* There are 2 unused bytes between header and real data */
- #define BGMAC_RX_BUF_OFFSET (NET_SKB_PAD + NET_IP_ALIGN - \
- BGMAC_RX_FRAME_OFFSET)
--/* Jumbo frame size with FCS */
--#define BGMAC_RX_MAX_FRAME_SIZE 9724
-+#define BGMAC_RX_MAX_FRAME_SIZE 1536
- #define BGMAC_RX_BUF_SIZE (BGMAC_RX_FRAME_OFFSET + BGMAC_RX_MAX_FRAME_SIZE)
- #define BGMAC_RX_ALLOC_SIZE (SKB_DATA_ALIGN(BGMAC_RX_BUF_SIZE + BGMAC_RX_BUF_OFFSET) + \
- SKB_DATA_ALIGN(sizeof(struct skb_shared_info)))
diff --git a/target/linux/bcm53xx/patches-6.1/905-BCM53573-minor-hacks.patch b/target/linux/bcm53xx/patches-6.1/905-BCM53573-minor-hacks.patch
deleted file mode 100644
index 0a52ca98ee..0000000000
--- a/target/linux/bcm53xx/patches-6.1/905-BCM53573-minor-hacks.patch
+++ /dev/null
@@ -1,80 +0,0 @@
-From 6f1c62440eb6846cb8045d7a5480ec7bbe47c96f Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal at milecki.pl>
-Date: Mon, 15 Aug 2016 10:30:41 +0200
-Subject: [PATCH] BCM53573 minor hacks
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
----
-
---- a/arch/arm/boot/dts/bcm53573.dtsi
-+++ b/arch/arm/boot/dts/bcm53573.dtsi
-@@ -54,6 +54,7 @@
- <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
- <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
- <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
-+ clocks = <&ilp>;
- };
-
- clocks {
---- a/drivers/bcma/main.c
-+++ b/drivers/bcma/main.c
-@@ -330,14 +330,6 @@ static int bcma_register_devices(struct
- }
- #endif
-
--#ifdef CONFIG_BCMA_SFLASH
-- if (bus->drv_cc.sflash.present) {
-- err = platform_device_register(&bcma_sflash_dev);
-- if (err)
-- bcma_err(bus, "Error registering serial flash\n");
-- }
--#endif
--
- #ifdef CONFIG_BCMA_NFLASH
- if (bus->drv_cc.nflash.present) {
- err = platform_device_register(&bcma_nflash_dev);
-@@ -415,6 +407,14 @@ int bcma_bus_register(struct bcma_bus *b
- bcma_register_core(bus, core);
- }
-
-+#ifdef CONFIG_BCMA_SFLASH
-+ if (bus->drv_cc.sflash.present) {
-+ err = platform_device_register(&bcma_sflash_dev);
-+ if (err)
-+ bcma_err(bus, "Error registering serial flash\n");
-+ }
-+#endif
-+
- /* Try to get SPROM */
- err = bcma_sprom_get(bus);
- if (err == -ENOENT) {
---- a/drivers/clocksource/arm_arch_timer.c
-+++ b/drivers/clocksource/arm_arch_timer.c
-@@ -14,6 +14,7 @@
- #include <linux/smp.h>
- #include <linux/cpu.h>
- #include <linux/cpu_pm.h>
-+#include <linux/clk.h>
- #include <linux/clockchips.h>
- #include <linux/clocksource.h>
- #include <linux/clocksource_ids.h>
-@@ -1029,6 +1030,16 @@ static void __init arch_timer_of_configu
- if (of_property_read_u32(np, "clock-frequency", &arch_timer_rate))
- arch_timer_rate = rate;
-
-+ /* Get clk rate through clk driver if present */
-+ if (!arch_timer_rate) {
-+ struct clk *clk = of_clk_get(np, 0);
-+
-+ if (!IS_ERR(clk)) {
-+ if (!clk_prepare_enable(clk))
-+ arch_timer_rate = clk_get_rate(clk);
-+ }
-+ }
-+
- /* Check the timer frequency. */
- if (validate_timer_rate())
- pr_warn("frequency not available\n");
More information about the lede-commits
mailing list