[openwrt/openwrt] ipq806x: Revert "ipq806x: swap lan leds for Meraki MR52"

[LEDE Commits]

robimarko pushed a commit to openwrt/openwrt.git, branch openwrt-23.05:
https://git.openwrt.org/92c2a4cf932d6f77509639bd6a4db1c11f64e97b

commit 92c2a4cf932d6f77509639bd6a4db1c11f64e97b
Author: Rafal Boni <rafal.boni at gmail.com>
AuthorDate: Thu Oct 24 03:06:22 2024 -0400

    ipq806x: Revert "ipq806x: swap lan leds for Meraki MR52"
    
    This reverts commit ec8f647d168fa8f3b1eedd9b5fe665f793f3a659, as with the
    current kernel version, the change actually causes the same bug it once
    may have fixed -- that is, the leds are now again reversed.
    
    I suspect this was due to a switch to a newer kernel version between when
    the patch was submitted and now reversing the order of the interfaces, so
    that eth0 / the LAN interface is also the interface used for PoE, and eth1
    / the WAN interface is the non-PoE interface.
    
    Signed-off-by: Rafal Boni <rafal.boni at gmail.com>
    Link: https://github.com/openwrt/openwrt/pull/16779
    (cherry picked from commit b5e1544f4d45795ab8750b1054c54c8880b7b96b)
    Signed-off-by: Rafal Boni <rafal.boni at gmail.com>
    Link: https://github.com/openwrt/openwrt/pull/16822
    Signed-off-by: Robert Marko <robimarko at gmail.com>
---
 .../ipq806x/files-5.15/arch/arm/boot/dts/qcom-ipq8068-mr52.dts    | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/target/linux/ipq806x/files-5.15/arch/arm/boot/dts/qcom-ipq8068-mr52.dts b/target/linux/ipq806x/files-5.15/arch/arm/boot/dts/qcom-ipq8068-mr52.dts
index b49ea499d6..695c5411ba 100644
--- a/target/linux/ipq806x/files-5.15/arch/arm/boot/dts/qcom-ipq8068-mr52.dts
+++ b/target/linux/ipq806x/files-5.15/arch/arm/boot/dts/qcom-ipq8068-mr52.dts
@@ -46,12 +46,12 @@
 
 		lan1_green {
 			label = "green:lan1";
-			gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
+			gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
 		};
 
 		lan2_green {
 			label = "green:lan2";
-			gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
+			gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
 		};
 
 		led_active: active {
@@ -61,12 +61,12 @@
 
 		lan1_orange {
 			label = "orange:lan1";
-			gpios = <&qcom_pinmux 60 GPIO_ACTIVE_HIGH>;
+			gpios = <&qcom_pinmux 62 GPIO_ACTIVE_HIGH>;
 		};
 
 		lan2_orange {
 			label = "orange:lan2";
-			gpios = <&qcom_pinmux 62 GPIO_ACTIVE_HIGH>;
+			gpios = <&qcom_pinmux 60 GPIO_ACTIVE_HIGH>;
 		};
 	};
 };