[openwrt/openwrt] iwinfo: add multi-radio support
LEDE Commits
lede-commits at lists.infradead.org
Tue Oct 22 05:49:09 PDT 2024
nbd pushed a commit to openwrt/openwrt.git, branch main:
https://git.openwrt.org/cb60bee04db6cdfe5062c20b816244ab49f2e9d1
commit cb60bee04db6cdfe5062c20b816244ab49f2e9d1
Author: Felix Fietkau <nbd at nbd.name>
AuthorDate: Wed Oct 2 19:56:52 2024 +0200
iwinfo: add multi-radio support
Fix the path to the hostapd config file for queries
Signed-off-by: Felix Fietkau <nbd at nbd.name>
---
.../utils/iwinfo/patches/100-multi_radio.patch | 1498 ++++++++++++++++++++
1 file changed, 1498 insertions(+)
diff --git a/package/network/utils/iwinfo/patches/100-multi_radio.patch b/package/network/utils/iwinfo/patches/100-multi_radio.patch
new file mode 100644
index 0000000000..3ad3b4fd10
--- /dev/null
+++ b/package/network/utils/iwinfo/patches/100-multi_radio.patch
@@ -0,0 +1,1498 @@
+--- a/api/nl80211.h
++++ b/api/nl80211.h
+@@ -11,7 +11,7 @@
+ * Copyright 2008 Jouni Malinen <jouni.malinen at atheros.com>
+ * Copyright 2008 Colin McCabe <colin at cozybit.com>
+ * Copyright 2015-2017 Intel Deutschland GmbH
+- * Copyright (C) 2018-2023 Intel Corporation
++ * Copyright (C) 2018-2024 Intel Corporation
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+@@ -72,7 +72,7 @@
+ * For drivers supporting TDLS with external setup (WIPHY_FLAG_SUPPORTS_TDLS
+ * and WIPHY_FLAG_TDLS_EXTERNAL_SETUP), the station lifetime is as follows:
+ * - a setup station entry is added, not yet authorized, without any rate
+- * or capability information, this just exists to avoid race conditions
++ * or capability information; this just exists to avoid race conditions
+ * - when the TDLS setup is done, a single NL80211_CMD_SET_STATION is valid
+ * to add rate and capability information to the station and at the same
+ * time mark it authorized.
+@@ -87,7 +87,7 @@
+ * DOC: Frame transmission/registration support
+ *
+ * Frame transmission and registration support exists to allow userspace
+- * management entities such as wpa_supplicant react to management frames
++ * management entities such as wpa_supplicant to react to management frames
+ * that are not being handled by the kernel. This includes, for example,
+ * certain classes of action frames that cannot be handled in the kernel
+ * for various reasons.
+@@ -113,7 +113,7 @@
+ *
+ * Frame transmission allows userspace to send for example the required
+ * responses to action frames. It is subject to some sanity checking,
+- * but many frames can be transmitted. When a frame was transmitted, its
++ * but many frames can be transmitted. When a frame is transmitted, its
+ * status is indicated to the sending socket.
+ *
+ * For more technical details, see the corresponding command descriptions
+@@ -123,7 +123,7 @@
+ /**
+ * DOC: Virtual interface / concurrency capabilities
+ *
+- * Some devices are able to operate with virtual MACs, they can have
++ * Some devices are able to operate with virtual MACs; they can have
+ * more than one virtual interface. The capability handling for this
+ * is a bit complex though, as there may be a number of restrictions
+ * on the types of concurrency that are supported.
+@@ -135,7 +135,7 @@
+ * Once concurrency is desired, more attributes must be observed:
+ * To start with, since some interface types are purely managed in
+ * software, like the AP-VLAN type in mac80211 for example, there's
+- * an additional list of these, they can be added at any time and
++ * an additional list of these; they can be added at any time and
+ * are only restricted by some semantic restrictions (e.g. AP-VLAN
+ * cannot be added without a corresponding AP interface). This list
+ * is exported in the %NL80211_ATTR_SOFTWARE_IFTYPES attribute.
+@@ -164,17 +164,17 @@
+ * Packet coalesce feature helps to reduce number of received interrupts
+ * to host by buffering these packets in firmware/hardware for some
+ * predefined time. Received interrupt will be generated when one of the
+- * following events occur.
++ * following events occurs.
+ * a) Expiration of hardware timer whose expiration time is set to maximum
+ * coalescing delay of matching coalesce rule.
+- * b) Coalescing buffer in hardware reaches it's limit.
++ * b) Coalescing buffer in hardware reaches its limit.
+ * c) Packet doesn't match any of the configured coalesce rules.
+ *
+ * User needs to configure following parameters for creating a coalesce
+ * rule.
+ * a) Maximum coalescing delay
+ * b) List of packet patterns which needs to be matched
+- * c) Condition for coalescence. pattern 'match' or 'no match'
++ * c) Condition for coalescence: pattern 'match' or 'no match'
+ * Multiple such rules can be created.
+ */
+
+@@ -213,7 +213,7 @@
+ /**
+ * DOC: FILS shared key authentication offload
+ *
+- * FILS shared key authentication offload can be advertized by drivers by
++ * FILS shared key authentication offload can be advertised by drivers by
+ * setting @NL80211_EXT_FEATURE_FILS_SK_OFFLOAD flag. The drivers that support
+ * FILS shared key authentication offload should be able to construct the
+ * authentication and association frames for FILS shared key authentication and
+@@ -239,7 +239,7 @@
+ * The PMKSA can be maintained in userspace persistently so that it can be used
+ * later after reboots or wifi turn off/on also.
+ *
+- * %NL80211_ATTR_FILS_CACHE_ID is the cache identifier advertized by a FILS
++ * %NL80211_ATTR_FILS_CACHE_ID is the cache identifier advertised by a FILS
+ * capable AP supporting PMK caching. It specifies the scope within which the
+ * PMKSAs are cached in an ESS. %NL80211_CMD_SET_PMKSA and
+ * %NL80211_CMD_DEL_PMKSA are enhanced to allow support for PMKSA caching based
+@@ -290,12 +290,12 @@
+ * If the configuration needs to be applied for specific peer then the MAC
+ * address of the peer needs to be passed in %NL80211_ATTR_MAC, otherwise the
+ * configuration will be applied for all the connected peers in the vif except
+- * any peers that have peer specific configuration for the TID by default; if
+- * the %NL80211_TID_CONFIG_ATTR_OVERRIDE flag is set, peer specific values
++ * any peers that have peer-specific configuration for the TID by default; if
++ * the %NL80211_TID_CONFIG_ATTR_OVERRIDE flag is set, peer-specific values
+ * will be overwritten.
+ *
+- * All this configuration is valid only for STA's current connection
+- * i.e. the configuration will be reset to default when the STA connects back
++ * All this configuration is valid only for STA's current connection,
++ * i.e., the configuration will be reset to default when the STA connects back
+ * after disconnection/roaming, and this configuration will be cleared when
+ * the interface goes down.
+ */
+@@ -326,7 +326,7 @@
+ /**
+ * DOC: Multi-Link Operation
+ *
+- * In Multi-Link Operation, a connection between to MLDs utilizes multiple
++ * In Multi-Link Operation, a connection between two MLDs utilizes multiple
+ * links. To use this in nl80211, various commands and responses now need
+ * to or will include the new %NL80211_ATTR_MLO_LINKS attribute.
+ * Additionally, various commands that need to operate on a specific link
+@@ -335,6 +335,15 @@
+ */
+
+ /**
++ * DOC: OWE DH IE handling offload
++ *
++ * By setting @NL80211_EXT_FEATURE_OWE_OFFLOAD flag, drivers can indicate
++ * kernel/application space to avoid DH IE handling. When this flag is
++ * advertised, the driver/device will take care of DH IE inclusion and
++ * processing of peer DH IE to generate PMK.
++ */
++
++/**
+ * enum nl80211_commands - supported nl80211 commands
+ *
+ * @NL80211_CMD_UNSPEC: unspecified command to catch errors
+@@ -404,8 +413,8 @@
+ * are like for %NL80211_CMD_SET_BEACON, and additionally parameters that
+ * do not change are used, these include %NL80211_ATTR_BEACON_INTERVAL,
+ * %NL80211_ATTR_DTIM_PERIOD, %NL80211_ATTR_SSID,
+- * %NL80211_ATTR_HIDDEN_SSID, %NL80211_ATTR_CIPHERS_PAIRWISE,
+- * %NL80211_ATTR_CIPHER_GROUP, %NL80211_ATTR_WPA_VERSIONS,
++ * %NL80211_ATTR_HIDDEN_SSID, %NL80211_ATTR_CIPHER_SUITES_PAIRWISE,
++ * %NL80211_ATTR_CIPHER_SUITE_GROUP, %NL80211_ATTR_WPA_VERSIONS,
+ * %NL80211_ATTR_AKM_SUITES, %NL80211_ATTR_PRIVACY,
+ * %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_INACTIVITY_TIMEOUT,
+ * %NL80211_ATTR_ACL_POLICY and %NL80211_ATTR_MAC_ADDRS.
+@@ -429,23 +438,19 @@
+ * %NL80211_ATTR_REASON_CODE can optionally be used to specify which type
+ * of disconnection indication should be sent to the station
+ * (Deauthentication or Disassociation frame and reason code for that
+- * frame).
++ * frame). %NL80211_ATTR_MLO_LINK_ID can be used optionally to remove
++ * stations connected and using at least that link as one of its links.
+ *
+ * @NL80211_CMD_GET_MPATH: Get mesh path attributes for mesh path to
+- * destination %NL80211_ATTR_MAC on the interface identified by
+- * %NL80211_ATTR_IFINDEX.
++ * destination %NL80211_ATTR_MAC on the interface identified by
++ * %NL80211_ATTR_IFINDEX.
+ * @NL80211_CMD_SET_MPATH: Set mesh path attributes for mesh path to
+- * destination %NL80211_ATTR_MAC on the interface identified by
+- * %NL80211_ATTR_IFINDEX.
++ * destination %NL80211_ATTR_MAC on the interface identified by
++ * %NL80211_ATTR_IFINDEX.
+ * @NL80211_CMD_NEW_MPATH: Create a new mesh path for the destination given by
+ * %NL80211_ATTR_MAC via %NL80211_ATTR_MPATH_NEXT_HOP.
+ * @NL80211_CMD_DEL_MPATH: Delete a mesh path to the destination given by
+ * %NL80211_ATTR_MAC.
+- * @NL80211_CMD_NEW_PATH: Add a mesh path with given attributes to the
+- * interface identified by %NL80211_ATTR_IFINDEX.
+- * @NL80211_CMD_DEL_PATH: Remove a mesh path identified by %NL80211_ATTR_MAC
+- * or, if no MAC address given, all mesh paths, on the interface identified
+- * by %NL80211_ATTR_IFINDEX.
+ * @NL80211_CMD_SET_BSS: Set BSS attributes for BSS identified by
+ * %NL80211_ATTR_IFINDEX.
+ *
+@@ -466,15 +471,15 @@
+ * after being queried by the kernel. CRDA replies by sending a regulatory
+ * domain structure which consists of %NL80211_ATTR_REG_ALPHA set to our
+ * current alpha2 if it found a match. It also provides
+- * NL80211_ATTR_REG_RULE_FLAGS, and a set of regulatory rules. Each
+- * regulatory rule is a nested set of attributes given by
+- * %NL80211_ATTR_REG_RULE_FREQ_[START|END] and
+- * %NL80211_ATTR_FREQ_RANGE_MAX_BW with an attached power rule given by
+- * %NL80211_ATTR_REG_RULE_POWER_MAX_ANT_GAIN and
+- * %NL80211_ATTR_REG_RULE_POWER_MAX_EIRP.
++ * NL80211_ATTR_REG_RULE_FLAGS, and a set of regulatory rules. Each
++ * regulatory rule is a nested set of attributes given by
++ * %NL80211_ATTR_REG_RULE_FREQ_[START|END] and
++ * %NL80211_ATTR_FREQ_RANGE_MAX_BW with an attached power rule given by
++ * %NL80211_ATTR_REG_RULE_POWER_MAX_ANT_GAIN and
++ * %NL80211_ATTR_REG_RULE_POWER_MAX_EIRP.
+ * @NL80211_CMD_REQ_SET_REG: ask the wireless core to set the regulatory domain
+- * to the specified ISO/IEC 3166-1 alpha2 country code. The core will
+- * store this as a valid request and then query userspace for it.
++ * to the specified ISO/IEC 3166-1 alpha2 country code. The core will
++ * store this as a valid request and then query userspace for it.
+ *
+ * @NL80211_CMD_GET_MESH_CONFIG: Get mesh networking properties for the
+ * interface identified by %NL80211_ATTR_IFINDEX
+@@ -512,7 +517,7 @@
+ * %NL80211_ATTR_SCHED_SCAN_PLANS. If %NL80211_ATTR_SCHED_SCAN_PLANS is
+ * not specified and only %NL80211_ATTR_SCHED_SCAN_INTERVAL is specified,
+ * scheduled scan will run in an infinite loop with the specified interval.
+- * These attributes are mutually exculsive,
++ * These attributes are mutually exclusive,
+ * i.e. NL80211_ATTR_SCHED_SCAN_INTERVAL must not be passed if
+ * NL80211_ATTR_SCHED_SCAN_PLANS is defined.
+ * If for some reason scheduled scan is aborted by the driver, all scan
+@@ -543,7 +548,7 @@
+ * %NL80211_CMD_STOP_SCHED_SCAN command is received or when the interface
+ * is brought down while a scheduled scan was running.
+ *
+- * @NL80211_CMD_GET_SURVEY: get survey resuls, e.g. channel occupation
++ * @NL80211_CMD_GET_SURVEY: get survey results, e.g. channel occupation
+ * or noise level
+ * @NL80211_CMD_NEW_SURVEY_RESULTS: survey data notification (as a reply to
+ * NL80211_CMD_GET_SURVEY and on the "scan" multicast group)
+@@ -554,40 +559,41 @@
+ * using %NL80211_ATTR_SSID, %NL80211_ATTR_FILS_CACHE_ID,
+ * %NL80211_ATTR_PMKID, and %NL80211_ATTR_PMK in case of FILS
+ * authentication where %NL80211_ATTR_FILS_CACHE_ID is the identifier
+- * advertized by a FILS capable AP identifying the scope of PMKSA in an
++ * advertised by a FILS capable AP identifying the scope of PMKSA in an
+ * ESS.
+ * @NL80211_CMD_DEL_PMKSA: Delete a PMKSA cache entry, using %NL80211_ATTR_MAC
+ * (for the BSSID) and %NL80211_ATTR_PMKID or using %NL80211_ATTR_SSID,
+ * %NL80211_ATTR_FILS_CACHE_ID, and %NL80211_ATTR_PMKID in case of FILS
+- * authentication.
++ * authentication. Additionally in case of SAE offload and OWE offloads
++ * PMKSA entry can be deleted using %NL80211_ATTR_SSID.
+ * @NL80211_CMD_FLUSH_PMKSA: Flush all PMKSA cache entries.
+ *
+ * @NL80211_CMD_REG_CHANGE: indicates to userspace the regulatory domain
+- * has been changed and provides details of the request information
+- * that caused the change such as who initiated the regulatory request
+- * (%NL80211_ATTR_REG_INITIATOR), the wiphy_idx
+- * (%NL80211_ATTR_REG_ALPHA2) on which the request was made from if
+- * the initiator was %NL80211_REGDOM_SET_BY_COUNTRY_IE or
+- * %NL80211_REGDOM_SET_BY_DRIVER, the type of regulatory domain
+- * set (%NL80211_ATTR_REG_TYPE), if the type of regulatory domain is
+- * %NL80211_REG_TYPE_COUNTRY the alpha2 to which we have moved on
+- * to (%NL80211_ATTR_REG_ALPHA2).
++ * has been changed and provides details of the request information
++ * that caused the change such as who initiated the regulatory request
++ * (%NL80211_ATTR_REG_INITIATOR), the wiphy_idx
++ * (%NL80211_ATTR_REG_ALPHA2) on which the request was made from if
++ * the initiator was %NL80211_REGDOM_SET_BY_COUNTRY_IE or
++ * %NL80211_REGDOM_SET_BY_DRIVER, the type of regulatory domain
++ * set (%NL80211_ATTR_REG_TYPE), if the type of regulatory domain is
++ * %NL80211_REG_TYPE_COUNTRY the alpha2 to which we have moved on
++ * to (%NL80211_ATTR_REG_ALPHA2).
+ * @NL80211_CMD_REG_BEACON_HINT: indicates to userspace that an AP beacon
+- * has been found while world roaming thus enabling active scan or
+- * any mode of operation that initiates TX (beacons) on a channel
+- * where we would not have been able to do either before. As an example
+- * if you are world roaming (regulatory domain set to world or if your
+- * driver is using a custom world roaming regulatory domain) and while
+- * doing a passive scan on the 5 GHz band you find an AP there (if not
+- * on a DFS channel) you will now be able to actively scan for that AP
+- * or use AP mode on your card on that same channel. Note that this will
+- * never be used for channels 1-11 on the 2 GHz band as they are always
+- * enabled world wide. This beacon hint is only sent if your device had
+- * either disabled active scanning or beaconing on a channel. We send to
+- * userspace the wiphy on which we removed a restriction from
+- * (%NL80211_ATTR_WIPHY) and the channel on which this occurred
+- * before (%NL80211_ATTR_FREQ_BEFORE) and after (%NL80211_ATTR_FREQ_AFTER)
+- * the beacon hint was processed.
++ * has been found while world roaming thus enabling active scan or
++ * any mode of operation that initiates TX (beacons) on a channel
++ * where we would not have been able to do either before. As an example
++ * if you are world roaming (regulatory domain set to world or if your
++ * driver is using a custom world roaming regulatory domain) and while
++ * doing a passive scan on the 5 GHz band you find an AP there (if not
++ * on a DFS channel) you will now be able to actively scan for that AP
++ * or use AP mode on your card on that same channel. Note that this will
++ * never be used for channels 1-11 on the 2 GHz band as they are always
++ * enabled world wide. This beacon hint is only sent if your device had
++ * either disabled active scanning or beaconing on a channel. We send to
++ * userspace the wiphy on which we removed a restriction from
++ * (%NL80211_ATTR_WIPHY) and the channel on which this occurred
++ * before (%NL80211_ATTR_FREQ_BEFORE) and after (%NL80211_ATTR_FREQ_AFTER)
++ * the beacon hint was processed.
+ *
+ * @NL80211_CMD_AUTHENTICATE: authentication request and notification.
+ * This command is used both as a command (request to authenticate) and
+@@ -598,7 +604,7 @@
+ * BSSID in case of station mode). %NL80211_ATTR_SSID is used to specify
+ * the SSID (mainly for association, but is included in authentication
+ * request, too, to help BSS selection. %NL80211_ATTR_WIPHY_FREQ +
+- * %NL80211_ATTR_WIPHY_FREQ_OFFSET is used to specify the frequence of the
++ * %NL80211_ATTR_WIPHY_FREQ_OFFSET is used to specify the frequency of the
+ * channel in MHz. %NL80211_ATTR_AUTH_TYPE is used to specify the
+ * authentication type. %NL80211_ATTR_IE is used to define IEs
+ * (VendorSpecificInfo, but also including RSN IE and FT IEs) to be added
+@@ -807,7 +813,7 @@
+ * reached.
+ * @NL80211_CMD_SET_CHANNEL: Set the channel (using %NL80211_ATTR_WIPHY_FREQ
+ * and the attributes determining channel width) the given interface
+- * (identifed by %NL80211_ATTR_IFINDEX) shall operate on.
++ * (identified by %NL80211_ATTR_IFINDEX) shall operate on.
+ * In case multiple channels are supported by the device, the mechanism
+ * with which it switches channels is implementation-defined.
+ * When a monitor interface is given, it can only switch channel while
+@@ -879,7 +885,7 @@
+ * inform userspace of the new replay counter.
+ *
+ * @NL80211_CMD_PMKSA_CANDIDATE: This is used as an event to inform userspace
+- * of PMKSA caching dandidates.
++ * of PMKSA caching candidates.
+ *
+ * @NL80211_CMD_TDLS_OPER: Perform a high-level TDLS command (e.g. link setup).
+ * In addition, this can be used as an event to request userspace to take
+@@ -915,7 +921,7 @@
+ *
+ * @NL80211_CMD_PROBE_CLIENT: Probe an associated station on an AP interface
+ * by sending a null data frame to it and reporting when the frame is
+- * acknowleged. This is used to allow timing out inactive clients. Uses
++ * acknowledged. This is used to allow timing out inactive clients. Uses
+ * %NL80211_ATTR_IFINDEX and %NL80211_ATTR_MAC. The command returns a
+ * direct reply with an %NL80211_ATTR_COOKIE that is later used to match
+ * up the event with the request. The event includes the same data and
+@@ -1109,7 +1115,7 @@
+ * current configuration is not changed. If it is present but
+ * set to zero, the configuration is changed to don't-care
+ * (i.e. the device can decide what to do).
+- * @NL80211_CMD_NAN_FUNC_MATCH: Notification sent when a match is reported.
++ * @NL80211_CMD_NAN_MATCH: Notification sent when a match is reported.
+ * This will contain a %NL80211_ATTR_NAN_MATCH nested attribute and
+ * %NL80211_ATTR_COOKIE.
+ *
+@@ -1126,11 +1132,15 @@
+ * @NL80211_CMD_DEL_PMK: For offloaded 4-Way handshake, delete the previously
+ * configured PMK for the authenticator address identified by
+ * %NL80211_ATTR_MAC.
+- * @NL80211_CMD_PORT_AUTHORIZED: An event that indicates an 802.1X FT roam was
+- * completed successfully. Drivers that support 4 way handshake offload
+- * should send this event after indicating 802.1X FT assocation with
+- * %NL80211_CMD_ROAM. If the 4 way handshake failed %NL80211_CMD_DISCONNECT
+- * should be indicated instead.
++ * @NL80211_CMD_PORT_AUTHORIZED: An event that indicates port is authorized and
++ * open for regular data traffic. For STA/P2P-client, this event is sent
++ * with AP MAC address and for AP/P2P-GO, the event carries the STA/P2P-
++ * client MAC address.
++ * Drivers that support 4 way handshake offload should send this event for
++ * STA/P2P-client after successful 4-way HS or after 802.1X FT following
++ * NL80211_CMD_CONNECT or NL80211_CMD_ROAM. Drivers using AP/P2P-GO 4-way
++ * handshake offload should send this event on successful completion of
++ * 4-way handshake with the peer (STA/P2P-client).
+ * @NL80211_CMD_CONTROL_PORT_FRAME: Control Port (e.g. PAE) frame TX request
+ * and RX notification. This command is used both as a request to transmit
+ * a control port frame and as a notification that a control port frame
+@@ -1314,6 +1324,11 @@
+ * Multi-Link reconfiguration. %NL80211_ATTR_MLO_LINKS is used to provide
+ * information about the removed STA MLD setup links.
+ *
++ * @NL80211_CMD_SET_TID_TO_LINK_MAPPING: Set the TID to Link Mapping for a
++ * non-AP MLD station. The %NL80211_ATTR_MLO_TTLM_DLINK and
++ * %NL80211_ATTR_MLO_TTLM_ULINK attributes are used to specify the
++ * TID to Link mapping for downlink/uplink traffic.
++ *
+ * @NL80211_CMD_MAX: highest used command number
+ * @__NL80211_CMD_AFTER_LAST: internal use
+ */
+@@ -1569,6 +1584,8 @@ enum nl80211_commands {
+
+ NL80211_CMD_LINKS_REMOVED,
+
++ NL80211_CMD_SET_TID_TO_LINK_MAPPING,
++
+ /* add new commands above here */
+
+ /* used to define NL80211_CMD_MAX below */
+@@ -1693,21 +1710,21 @@ enum nl80211_commands {
+ * (see &enum nl80211_plink_action).
+ * @NL80211_ATTR_MPATH_NEXT_HOP: MAC address of the next hop for a mesh path.
+ * @NL80211_ATTR_MPATH_INFO: information about a mesh_path, part of mesh path
+- * info given for %NL80211_CMD_GET_MPATH, nested attribute described at
++ * info given for %NL80211_CMD_GET_MPATH, nested attribute described at
+ * &enum nl80211_mpath_info.
+ *
+ * @NL80211_ATTR_MNTR_FLAGS: flags, nested element with NLA_FLAG attributes of
+ * &enum nl80211_mntr_flags.
+ *
+ * @NL80211_ATTR_REG_ALPHA2: an ISO-3166-alpha2 country code for which the
+- * current regulatory domain should be set to or is already set to.
+- * For example, 'CR', for Costa Rica. This attribute is used by the kernel
+- * to query the CRDA to retrieve one regulatory domain. This attribute can
+- * also be used by userspace to query the kernel for the currently set
+- * regulatory domain. We chose an alpha2 as that is also used by the
+- * IEEE-802.11 country information element to identify a country.
+- * Users can also simply ask the wireless core to set regulatory domain
+- * to a specific alpha2.
++ * current regulatory domain should be set to or is already set to.
++ * For example, 'CR', for Costa Rica. This attribute is used by the kernel
++ * to query the CRDA to retrieve one regulatory domain. This attribute can
++ * also be used by userspace to query the kernel for the currently set
++ * regulatory domain. We chose an alpha2 as that is also used by the
++ * IEEE-802.11 country information element to identify a country.
++ * Users can also simply ask the wireless core to set regulatory domain
++ * to a specific alpha2.
+ * @NL80211_ATTR_REG_RULES: a nested array of regulatory domain regulatory
+ * rules.
+ *
+@@ -1750,9 +1767,9 @@ enum nl80211_commands {
+ * @NL80211_ATTR_BSS: scan result BSS
+ *
+ * @NL80211_ATTR_REG_INITIATOR: indicates who requested the regulatory domain
+- * currently in effect. This could be any of the %NL80211_REGDOM_SET_BY_*
++ * currently in effect. This could be any of the %NL80211_REGDOM_SET_BY_*
+ * @NL80211_ATTR_REG_TYPE: indicates the type of the regulatory domain currently
+- * set. This can be one of the nl80211_reg_type (%NL80211_REGDOM_TYPE_*)
++ * set. This can be one of the nl80211_reg_type (%NL80211_REGDOM_TYPE_*)
+ *
+ * @NL80211_ATTR_SUPPORTED_COMMANDS: wiphy attribute that specifies
+ * an array of command numbers (i.e. a mapping index to command number)
+@@ -1771,15 +1788,15 @@ enum nl80211_commands {
+ * a u32
+ *
+ * @NL80211_ATTR_FREQ_BEFORE: A channel which has suffered a regulatory change
+- * due to considerations from a beacon hint. This attribute reflects
+- * the state of the channel _before_ the beacon hint processing. This
+- * attributes consists of a nested attribute containing
+- * NL80211_FREQUENCY_ATTR_*
++ * due to considerations from a beacon hint. This attribute reflects
++ * the state of the channel _before_ the beacon hint processing. This
++ * attributes consists of a nested attribute containing
++ * NL80211_FREQUENCY_ATTR_*
+ * @NL80211_ATTR_FREQ_AFTER: A channel which has suffered a regulatory change
+- * due to considerations from a beacon hint. This attribute reflects
+- * the state of the channel _after_ the beacon hint processing. This
+- * attributes consists of a nested attribute containing
+- * NL80211_FREQUENCY_ATTR_*
++ * due to considerations from a beacon hint. This attribute reflects
++ * the state of the channel _after_ the beacon hint processing. This
++ * attributes consists of a nested attribute containing
++ * NL80211_FREQUENCY_ATTR_*
+ *
+ * @NL80211_ATTR_CIPHER_SUITES: a set of u32 values indicating the supported
+ * cipher suites
+@@ -1826,7 +1843,7 @@ enum nl80211_commands {
+ * using %CMD_CONTROL_PORT_FRAME. If control port routing over NL80211 is
+ * to be used then userspace must also use the %NL80211_ATTR_SOCKET_OWNER
+ * flag. When used with %NL80211_ATTR_CONTROL_PORT_NO_PREAUTH, pre-auth
+- * frames are not forwared over the control port.
++ * frames are not forwarded over the control port.
+ *
+ * @NL80211_ATTR_TESTDATA: Testmode data blob, passed through to the driver.
+ * We recommend using nested, driver-specific attributes within this.
+@@ -1840,12 +1857,6 @@ enum nl80211_commands {
+ * that protected APs should be used. This is also used with NEW_BEACON to
+ * indicate that the BSS is to use protection.
+ *
+- * @NL80211_ATTR_CIPHERS_PAIRWISE: Used with CONNECT, ASSOCIATE, and NEW_BEACON
+- * to indicate which unicast key ciphers will be used with the connection
+- * (an array of u32).
+- * @NL80211_ATTR_CIPHER_GROUP: Used with CONNECT, ASSOCIATE, and NEW_BEACON to
+- * indicate which group key cipher will be used with the connection (a
+- * u32).
+ * @NL80211_ATTR_WPA_VERSIONS: Used with CONNECT, ASSOCIATE, and NEW_BEACON to
+ * indicate which WPA version(s) the AP we want to associate with is using
+ * (a u32 with flags from &enum nl80211_wpa_versions).
+@@ -1876,6 +1887,7 @@ enum nl80211_commands {
+ * with %NL80211_KEY_* sub-attributes
+ *
+ * @NL80211_ATTR_PID: Process ID of a network namespace.
++ * @NL80211_ATTR_NETNS_FD: File descriptor of a network namespace.
+ *
+ * @NL80211_ATTR_GENERATION: Used to indicate consistent snapshots for
+ * dumps. This number increases whenever the object list being
+@@ -1930,6 +1942,7 @@ enum nl80211_commands {
+ *
+ * @NL80211_ATTR_ACK: Flag attribute indicating that the frame was
+ * acknowledged by the recipient.
++ * @NL80211_ATTR_ACK_SIGNAL: Station's ack signal strength (s32)
+ *
+ * @NL80211_ATTR_PS_STATE: powersave state, using &enum nl80211_ps_state values.
+ *
+@@ -1963,10 +1976,10 @@ enum nl80211_commands {
+ * bit. Depending on which antennas are selected in the bitmap, 802.11n
+ * drivers can derive which chainmasks to use (if all antennas belonging to
+ * a particular chain are disabled this chain should be disabled) and if
+- * a chain has diversity antennas wether diversity should be used or not.
++ * a chain has diversity antennas whether diversity should be used or not.
+ * HT capabilities (STBC, TX Beamforming, Antenna selection) can be
+ * derived from the available chains after applying the antenna mask.
+- * Non-802.11n drivers can derive wether to use diversity or not.
++ * Non-802.11n drivers can derive whether to use diversity or not.
+ * Drivers may reject configurations or RX/TX mask combinations they cannot
+ * support by returning -EINVAL.
+ *
+@@ -2039,6 +2052,10 @@ enum nl80211_commands {
+ * @NL80211_ATTR_INTERFACE_COMBINATIONS: Nested attribute listing the supported
+ * interface combinations. In each nested item, it contains attributes
+ * defined in &enum nl80211_if_combination_attrs.
++ * If the wiphy uses multiple radios (@NL80211_ATTR_WIPHY_RADIOS is set),
++ * this attribute contains the interface combinations of the first radio.
++ * See @NL80211_ATTR_WIPHY_INTERFACE_COMBINATIONS for the global wiphy
++ * combinations for the sum of all radios.
+ * @NL80211_ATTR_SOFTWARE_IFTYPES: Nested attribute (just like
+ * %NL80211_ATTR_SUPPORTED_IFTYPES) containing the interface types that
+ * are managed in software: interfaces of these types aren't subject to
+@@ -2127,6 +2144,9 @@ enum nl80211_commands {
+ * @NL80211_ATTR_DISABLE_HE: Force HE capable interfaces to disable
+ * this feature during association. This is a flag attribute.
+ * Currently only supported in mac80211 drivers.
++ * @NL80211_ATTR_DISABLE_EHT: Force EHT capable interfaces to disable
++ * this feature during association. This is a flag attribute.
++ * Currently only supported in mac80211 drivers.
+ * @NL80211_ATTR_HT_CAPABILITY_MASK: Specify which bits of the
+ * ATTR_HT_CAPABILITY to which attention should be paid.
+ * Currently, only mac80211 NICs support this feature.
+@@ -2136,6 +2156,12 @@ enum nl80211_commands {
+ * All values are treated as suggestions and may be ignored
+ * by the driver as required. The actual values may be seen in
+ * the station debugfs ht_caps file.
++ * @NL80211_ATTR_VHT_CAPABILITY_MASK: Specify which bits of the
++ * ATTR_VHT_CAPABILITY to which attention should be paid.
++ * Currently, only mac80211 NICs support this feature.
++ * All values are treated as suggestions and may be ignored
++ * by the driver as required. The actual values may be seen in
++ * the station debugfs vht_caps file.
+ *
+ * @NL80211_ATTR_DFS_REGION: region for regulatory rules which this country
+ * abides to when initiating radiation on DFS channels. A country maps
+@@ -2394,7 +2420,7 @@ enum nl80211_commands {
+ * scheduled scan is started. Or the delay before a WoWLAN
+ * net-detect scan is started, counting from the moment the
+ * system is suspended. This value is a u32, in seconds.
+-
++ *
+ * @NL80211_ATTR_REG_INDOOR: flag attribute, if set indicates that the device
+ * is operating in an indoor environment.
+ *
+@@ -2536,7 +2562,7 @@ enum nl80211_commands {
+ * from successful FILS authentication and is used with
+ * %NL80211_CMD_CONNECT.
+ *
+- * @NL80211_ATTR_FILS_CACHE_ID: A 2-octet identifier advertized by a FILS AP
++ * @NL80211_ATTR_FILS_CACHE_ID: A 2-octet identifier advertised by a FILS AP
+ * identifying the scope of PMKSAs. This is used with
+ * @NL80211_CMD_SET_PMKSA and @NL80211_CMD_DEL_PMKSA.
+ *
+@@ -2690,11 +2716,13 @@ enum nl80211_commands {
+ *
+ * @NL80211_ATTR_FILS_DISCOVERY: Optional parameter to configure FILS
+ * discovery. It is a nested attribute, see
+- * &enum nl80211_fils_discovery_attributes.
++ * &enum nl80211_fils_discovery_attributes. Userspace should pass an empty
++ * nested attribute to disable this feature and delete the templates.
+ *
+ * @NL80211_ATTR_UNSOL_BCAST_PROBE_RESP: Optional parameter to configure
+ * unsolicited broadcast probe response. It is a nested attribute, see
+- * &enum nl80211_unsol_bcast_probe_resp_attributes.
++ * &enum nl80211_unsol_bcast_probe_resp_attributes. Userspace should pass an empty
++ * nested attribute to disable this feature and delete the templates.
+ *
+ * @NL80211_ATTR_S1G_CAPABILITY: S1G Capability information element (from
+ * association request when used with NL80211_CMD_NEW_STATION)
+@@ -2815,6 +2843,34 @@ enum nl80211_commands {
+ * @NL80211_ATTR_MLO_LINK_DISABLED: Flag attribute indicating that the link is
+ * disabled.
+ *
++ * @NL80211_ATTR_BSS_DUMP_INCLUDE_USE_DATA: Include BSS usage data, i.e.
++ * include BSSes that can only be used in restricted scenarios and/or
++ * cannot be used at all.
++ *
++ * @NL80211_ATTR_MLO_TTLM_DLINK: Binary attribute specifying the downlink TID to
++ * link mapping. The length is 8 * sizeof(u16). For each TID the link
++ * mapping is as defined in section 9.4.2.314 (TID-To-Link Mapping element)
++ * in Draft P802.11be_D4.0.
++ * @NL80211_ATTR_MLO_TTLM_ULINK: Binary attribute specifying the uplink TID to
++ * link mapping. The length is 8 * sizeof(u16). For each TID the link
++ * mapping is as defined in section 9.4.2.314 (TID-To-Link Mapping element)
++ * in Draft P802.11be_D4.0.
++ *
++ * @NL80211_ATTR_ASSOC_SPP_AMSDU: flag attribute used with
++ * %NL80211_CMD_ASSOCIATE indicating the SPP A-MSDUs
++ * are used on this connection
++ *
++ * @NL80211_ATTR_WIPHY_RADIOS: Nested attribute describing physical radios
++ * belonging to this wiphy. See &enum nl80211_wiphy_radio_attrs.
++ *
++ * @NL80211_ATTR_WIPHY_INTERFACE_COMBINATIONS: Nested attribute listing the
++ * supported interface combinations for all radios combined. In each
++ * nested item, it contains attributes defined in
++ * &enum nl80211_if_combination_attrs.
++ *
++ * @NL80211_ATTR_VIF_RADIO_MASK: Bitmask of allowed radios (u32).
++ * A value of 0 means all radios.
++ *
+ * @NUM_NL80211_ATTR: total number of nl80211_attrs available
+ * @NL80211_ATTR_MAX: highest attribute number currently defined
+ * @__NL80211_ATTR_AFTER_LAST: internal use
+@@ -3353,6 +3409,18 @@ enum nl80211_attrs {
+
+ NL80211_ATTR_MLO_LINK_DISABLED,
+
++ NL80211_ATTR_BSS_DUMP_INCLUDE_USE_DATA,
++
++ NL80211_ATTR_MLO_TTLM_DLINK,
++ NL80211_ATTR_MLO_TTLM_ULINK,
++
++ NL80211_ATTR_ASSOC_SPP_AMSDU,
++
++ NL80211_ATTR_WIPHY_RADIOS,
++ NL80211_ATTR_WIPHY_INTERFACE_COMBINATIONS,
++
++ NL80211_ATTR_VIF_RADIO_MASK,
++
+ /* add attributes here, update the policy in nl80211.c */
+
+ __NL80211_ATTR_AFTER_LAST,
+@@ -3493,6 +3561,7 @@ enum nl80211_iftype {
+ * @NL80211_STA_FLAG_ASSOCIATED: station is associated; used with drivers
+ * that support %NL80211_FEATURE_FULL_AP_CLIENT_STATE to transition a
+ * previously added station into associated state
++ * @NL80211_STA_FLAG_SPP_AMSDU: station supports SPP A-MSDUs
+ * @NL80211_STA_FLAG_MAX: highest station flag number currently defined
+ * @__NL80211_STA_FLAG_AFTER_LAST: internal use
+ */
+@@ -3505,6 +3574,7 @@ enum nl80211_sta_flags {
+ NL80211_STA_FLAG_AUTHENTICATED,
+ NL80211_STA_FLAG_TDLS_PEER,
+ NL80211_STA_FLAG_ASSOCIATED,
++ NL80211_STA_FLAG_SPP_AMSDU,
+
+ /* keep last */
+ __NL80211_STA_FLAG_AFTER_LAST,
+@@ -3515,7 +3585,7 @@ enum nl80211_sta_flags {
+ * enum nl80211_sta_p2p_ps_status - station support of P2P PS
+ *
+ * @NL80211_P2P_PS_UNSUPPORTED: station doesn't support P2P PS mechanism
+- * @@NL80211_P2P_PS_SUPPORTED: station supports P2P PS mechanism
++ * @NL80211_P2P_PS_SUPPORTED: station supports P2P PS mechanism
+ * @NUM_NL80211_P2P_PS_STATUS: number of values
+ */
+ enum nl80211_sta_p2p_ps_status {
+@@ -3553,9 +3623,9 @@ enum nl80211_he_gi {
+
+ /**
+ * enum nl80211_he_ltf - HE long training field
+- * @NL80211_RATE_INFO_HE_1xLTF: 3.2 usec
+- * @NL80211_RATE_INFO_HE_2xLTF: 6.4 usec
+- * @NL80211_RATE_INFO_HE_4xLTF: 12.8 usec
++ * @NL80211_RATE_INFO_HE_1XLTF: 3.2 usec
++ * @NL80211_RATE_INFO_HE_2XLTF: 6.4 usec
++ * @NL80211_RATE_INFO_HE_4XLTF: 12.8 usec
+ */
+ enum nl80211_he_ltf {
+ NL80211_RATE_INFO_HE_1XLTF,
+@@ -3670,7 +3740,7 @@ enum nl80211_eht_ru_alloc {
+ * @NL80211_RATE_INFO_HE_GI: HE guard interval identifier
+ * (u8, see &enum nl80211_he_gi)
+ * @NL80211_RATE_INFO_HE_DCM: HE DCM value (u8, 0/1)
+- * @NL80211_RATE_INFO_RU_ALLOC: HE RU allocation, if not present then
++ * @NL80211_RATE_INFO_HE_RU_ALLOC: HE RU allocation, if not present then
+ * non-OFDMA was used (u8, see &enum nl80211_he_ru_alloc)
+ * @NL80211_RATE_INFO_320_MHZ_WIDTH: 320 MHz bitrate
+ * @NL80211_RATE_INFO_EHT_MCS: EHT MCS index (u8, 0-15)
+@@ -3773,7 +3843,7 @@ enum nl80211_sta_bss_param {
+ * (u64, to this station)
+ * @NL80211_STA_INFO_SIGNAL: signal strength of last received PPDU (u8, dBm)
+ * @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute
+- * containing info as possible, see &enum nl80211_rate_info
++ * containing info as possible, see &enum nl80211_rate_info
+ * @NL80211_STA_INFO_RX_PACKETS: total received packet (MSDUs and MMPDUs)
+ * (u32, from this station)
+ * @NL80211_STA_INFO_TX_PACKETS: total transmitted packets (MSDUs and MMPDUs)
+@@ -3802,8 +3872,8 @@ enum nl80211_sta_bss_param {
+ * Contains a nested array of signal strength attributes (u8, dBm)
+ * @NL80211_STA_INFO_CHAIN_SIGNAL_AVG: per-chain signal strength average
+ * Same format as NL80211_STA_INFO_CHAIN_SIGNAL.
+- * @NL80211_STA_EXPECTED_THROUGHPUT: expected throughput considering also the
+- * 802.11 header (u32, kbps)
++ * @NL80211_STA_INFO_EXPECTED_THROUGHPUT: expected throughput considering also
++ * the 802.11 header (u32, kbps)
+ * @NL80211_STA_INFO_RX_DROP_MISC: RX packets dropped for unspecified reasons
+ * (u64)
+ * @NL80211_STA_INFO_BEACON_RX: number of beacons received from this peer (u64)
+@@ -3989,7 +4059,7 @@ enum nl80211_mpath_flags {
+ * @NL80211_MPATH_INFO_METRIC: metric (cost) of this mesh path
+ * @NL80211_MPATH_INFO_EXPTIME: expiration time for the path, in msec from now
+ * @NL80211_MPATH_INFO_FLAGS: mesh path flags, enumerated in
+- * &enum nl80211_mpath_flags;
++ * &enum nl80211_mpath_flags;
+ * @NL80211_MPATH_INFO_DISCOVERY_TIMEOUT: total path discovery timeout, in msec
+ * @NL80211_MPATH_INFO_DISCOVERY_RETRIES: mesh path discovery retries
+ * @NL80211_MPATH_INFO_HOP_COUNT: hop count to destination
+@@ -4129,7 +4199,7 @@ enum nl80211_band_attr {
+ * @NL80211_WMMR_CW_MAX: Maximum contention window slot.
+ * @NL80211_WMMR_AIFSN: Arbitration Inter Frame Space.
+ * @NL80211_WMMR_TXOP: Maximum allowed tx operation time.
+- * @nl80211_WMMR_MAX: highest possible wmm rule.
++ * @NL80211_WMMR_MAX: highest possible wmm rule.
+ * @__NL80211_WMMR_LAST: Internal use.
+ */
+ enum nl80211_wmm_rule {
+@@ -4151,15 +4221,16 @@ enum nl80211_wmm_rule {
+ * @NL80211_FREQUENCY_ATTR_DISABLED: Channel is disabled in current
+ * regulatory domain.
+ * @NL80211_FREQUENCY_ATTR_NO_IR: no mechanisms that initiate radiation
+- * are permitted on this channel, this includes sending probe
+- * requests, or modes of operation that require beaconing.
++ * are permitted on this channel, this includes sending probe
++ * requests, or modes of operation that require beaconing.
++ * @__NL80211_FREQUENCY_ATTR_NO_IBSS: obsolete, same as _NO_IR
+ * @NL80211_FREQUENCY_ATTR_RADAR: Radar detection is mandatory
+ * on this channel in current regulatory domain.
+ * @NL80211_FREQUENCY_ATTR_MAX_TX_POWER: Maximum transmission power in mBm
+ * (100 * dBm).
+ * @NL80211_FREQUENCY_ATTR_DFS_STATE: current state for DFS
+ * (enum nl80211_dfs_state)
+- * @NL80211_FREQUENCY_ATTR_DFS_TIME: time in miliseconds for how long
++ * @NL80211_FREQUENCY_ATTR_DFS_TIME: time in milliseconds for how long
+ * this channel is in this DFS state.
+ * @NL80211_FREQUENCY_ATTR_NO_HT40_MINUS: HT40- isn't possible with this
+ * channel as the control channel
+@@ -4213,6 +4284,21 @@ enum nl80211_wmm_rule {
+ * as the primary or any of the secondary channels isn't possible
+ * @NL80211_FREQUENCY_ATTR_NO_EHT: EHT operation is not allowed on this channel
+ * in current regulatory domain.
++ * @NL80211_FREQUENCY_ATTR_PSD: Power spectral density (in dBm) that
++ * is allowed on this channel in current regulatory domain.
++ * @NL80211_FREQUENCY_ATTR_DFS_CONCURRENT: Operation on this channel is
++ * allowed for peer-to-peer or adhoc communication under the control
++ * of a DFS master which operates on the same channel (FCC-594280 D01
++ * Section B.3). Should be used together with %NL80211_RRF_DFS only.
++ * @NL80211_FREQUENCY_ATTR_NO_6GHZ_VLP_CLIENT: Client connection to VLP AP
++ * not allowed using this channel
++ * @NL80211_FREQUENCY_ATTR_NO_6GHZ_AFC_CLIENT: Client connection to AFC AP
++ * not allowed using this channel
++ * @NL80211_FREQUENCY_ATTR_CAN_MONITOR: This channel can be used in monitor
++ * mode despite other (regulatory) restrictions, even if the channel is
++ * otherwise completely disabled.
++ * @NL80211_FREQUENCY_ATTR_ALLOW_6GHZ_VLP_AP: This channel can be used for a
++ * very low power (VLP) AP, despite being NO_IR.
+ * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number
+ * currently defined
+ * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use
+@@ -4251,6 +4337,12 @@ enum nl80211_frequency_attr {
+ NL80211_FREQUENCY_ATTR_16MHZ,
+ NL80211_FREQUENCY_ATTR_NO_320MHZ,
+ NL80211_FREQUENCY_ATTR_NO_EHT,
++ NL80211_FREQUENCY_ATTR_PSD,
++ NL80211_FREQUENCY_ATTR_DFS_CONCURRENT,
++ NL80211_FREQUENCY_ATTR_NO_6GHZ_VLP_CLIENT,
++ NL80211_FREQUENCY_ATTR_NO_6GHZ_AFC_CLIENT,
++ NL80211_FREQUENCY_ATTR_CAN_MONITOR,
++ NL80211_FREQUENCY_ATTR_ALLOW_6GHZ_VLP_AP,
+
+ /* keep last */
+ __NL80211_FREQUENCY_ATTR_AFTER_LAST,
+@@ -4263,6 +4355,10 @@ enum nl80211_frequency_attr {
+ #define NL80211_FREQUENCY_ATTR_NO_IR NL80211_FREQUENCY_ATTR_NO_IR
+ #define NL80211_FREQUENCY_ATTR_GO_CONCURRENT \
+ NL80211_FREQUENCY_ATTR_IR_CONCURRENT
++#define NL80211_FREQUENCY_ATTR_NO_UHB_VLP_CLIENT \
++ NL80211_FREQUENCY_ATTR_NO_6GHZ_VLP_CLIENT
++#define NL80211_FREQUENCY_ATTR_NO_UHB_AFC_CLIENT \
++ NL80211_FREQUENCY_ATTR_NO_6GHZ_AFC_CLIENT
+
+ /**
+ * enum nl80211_bitrate_attr - bitrate attributes
+@@ -4285,16 +4381,16 @@ enum nl80211_bitrate_attr {
+ };
+
+ /**
+- * enum nl80211_initiator - Indicates the initiator of a reg domain request
++ * enum nl80211_reg_initiator - Indicates the initiator of a reg domain request
+ * @NL80211_REGDOM_SET_BY_CORE: Core queried CRDA for a dynamic world
+- * regulatory domain.
++ * regulatory domain.
+ * @NL80211_REGDOM_SET_BY_USER: User asked the wireless core to set the
+- * regulatory domain.
++ * regulatory domain.
+ * @NL80211_REGDOM_SET_BY_DRIVER: a wireless drivers has hinted to the
+- * wireless core it thinks its knows the regulatory domain we should be in.
++ * wireless core it thinks its knows the regulatory domain we should be in.
+ * @NL80211_REGDOM_SET_BY_COUNTRY_IE: the wireless core has received an
+- * 802.11 country information element with regulatory information it
+- * thinks we should consider. cfg80211 only processes the country
++ * 802.11 country information element with regulatory information it
++ * thinks we should consider. cfg80211 only processes the country
+ * code from the IE, and relies on the regulatory domain information
+ * structure passed by userspace (CRDA) from our wireless-regdb.
+ * If a channel is enabled but the country code indicates it should
+@@ -4313,11 +4409,11 @@ enum nl80211_reg_initiator {
+ * to a specific country. When this is set you can count on the
+ * ISO / IEC 3166 alpha2 country code being valid.
+ * @NL80211_REGDOM_TYPE_WORLD: the regulatory set domain is the world regulatory
+- * domain.
++ * domain.
+ * @NL80211_REGDOM_TYPE_CUSTOM_WORLD: the regulatory domain set is a custom
+- * driver specific world regulatory domain. These do not apply system-wide
+- * and are only applicable to the individual devices which have requested
+- * them to be applied.
++ * driver specific world regulatory domain. These do not apply system-wide
++ * and are only applicable to the individual devices which have requested
++ * them to be applied.
+ * @NL80211_REGDOM_TYPE_INTERSECTION: the regulatory domain set is the product
+ * of an intersection between two regulatory domains -- the previously
+ * set regulatory domain on the system and the last accepted regulatory
+@@ -4334,23 +4430,25 @@ enum nl80211_reg_type {
+ * enum nl80211_reg_rule_attr - regulatory rule attributes
+ * @__NL80211_REG_RULE_ATTR_INVALID: attribute number 0 is reserved
+ * @NL80211_ATTR_REG_RULE_FLAGS: a set of flags which specify additional
+- * considerations for a given frequency range. These are the
+- * &enum nl80211_reg_rule_flags.
++ * considerations for a given frequency range. These are the
++ * &enum nl80211_reg_rule_flags.
+ * @NL80211_ATTR_FREQ_RANGE_START: starting frequencry for the regulatory
+- * rule in KHz. This is not a center of frequency but an actual regulatory
+- * band edge.
++ * rule in KHz. This is not a center of frequency but an actual regulatory
++ * band edge.
+ * @NL80211_ATTR_FREQ_RANGE_END: ending frequency for the regulatory rule
+- * in KHz. This is not a center a frequency but an actual regulatory
+- * band edge.
++ * in KHz. This is not a center a frequency but an actual regulatory
++ * band edge.
+ * @NL80211_ATTR_FREQ_RANGE_MAX_BW: maximum allowed bandwidth for this
+ * frequency range, in KHz.
+ * @NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN: the maximum allowed antenna gain
+- * for a given frequency range. The value is in mBi (100 * dBi).
+- * If you don't have one then don't send this.
++ * for a given frequency range. The value is in mBi (100 * dBi).
++ * If you don't have one then don't send this.
+ * @NL80211_ATTR_POWER_RULE_MAX_EIRP: the maximum allowed EIRP for
+- * a given frequency range. The value is in mBm (100 * dBm).
++ * a given frequency range. The value is in mBm (100 * dBm).
+ * @NL80211_ATTR_DFS_CAC_TIME: DFS CAC time in milliseconds.
+ * If not present or 0 default CAC time will be used.
++ * @NL80211_ATTR_POWER_RULE_PSD: power spectral density (in dBm).
++ * This could be negative.
+ * @NL80211_REG_RULE_ATTR_MAX: highest regulatory rule attribute number
+ * currently defined
+ * @__NL80211_REG_RULE_ATTR_AFTER_LAST: internal use
+@@ -4368,6 +4466,8 @@ enum nl80211_reg_rule_attr {
+
+ NL80211_ATTR_DFS_CAC_TIME,
+
++ NL80211_ATTR_POWER_RULE_PSD,
++
+ /* keep last */
+ __NL80211_REG_RULE_ATTR_AFTER_LAST,
+ NL80211_REG_RULE_ATTR_MAX = __NL80211_REG_RULE_ATTR_AFTER_LAST - 1
+@@ -4396,14 +4496,7 @@ enum nl80211_reg_rule_attr {
+ * value as specified by &struct nl80211_bss_select_rssi_adjust.
+ * @NL80211_SCHED_SCAN_MATCH_ATTR_BSSID: BSSID to be used for matching
+ * (this cannot be used together with SSID).
+- * @NL80211_SCHED_SCAN_MATCH_PER_BAND_RSSI: Nested attribute that carries the
+- * band specific minimum rssi thresholds for the bands defined in
+- * enum nl80211_band. The minimum rssi threshold value(s32) specific to a
+- * band shall be encapsulated in attribute with type value equals to one
+- * of the NL80211_BAND_* defined in enum nl80211_band. For example, the
+- * minimum rssi threshold value for 2.4GHZ band shall be encapsulated
+- * within an attribute of type NL80211_BAND_2GHZ. And one or more of such
+- * attributes will be nested within this attribute.
++ * @NL80211_SCHED_SCAN_MATCH_PER_BAND_RSSI: Obsolete
+ * @NL80211_SCHED_SCAN_MATCH_ATTR_MAX: highest scheduled scan filter
+ * attribute number currently defined
+ * @__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST: internal use
+@@ -4416,7 +4509,7 @@ enum nl80211_sched_scan_match_attr {
+ NL80211_SCHED_SCAN_MATCH_ATTR_RELATIVE_RSSI,
+ NL80211_SCHED_SCAN_MATCH_ATTR_RSSI_ADJUST,
+ NL80211_SCHED_SCAN_MATCH_ATTR_BSSID,
+- NL80211_SCHED_SCAN_MATCH_PER_BAND_RSSI,
++ NL80211_SCHED_SCAN_MATCH_PER_BAND_RSSI, /* obsolete */
+
+ /* keep last */
+ __NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST,
+@@ -4438,8 +4531,9 @@ enum nl80211_sched_scan_match_attr {
+ * @NL80211_RRF_PTP_ONLY: this is only for Point To Point links
+ * @NL80211_RRF_PTMP_ONLY: this is only for Point To Multi Point links
+ * @NL80211_RRF_NO_IR: no mechanisms that initiate radiation are allowed,
+- * this includes probe requests or modes of operation that require
+- * beaconing.
++ * this includes probe requests or modes of operation that require
++ * beaconing.
++ * @__NL80211_RRF_NO_IBSS: obsolete, same as NO_IR
+ * @NL80211_RRF_AUTO_BW: maximum available bandwidth should be calculated
+ * base on contiguous rules and wider channels will be allowed to cross
+ * multiple contiguous/overlapping frequency ranges.
+@@ -4451,6 +4545,15 @@ enum nl80211_sched_scan_match_attr {
+ * @NL80211_RRF_NO_HE: HE operation not allowed
+ * @NL80211_RRF_NO_320MHZ: 320MHz operation not allowed
+ * @NL80211_RRF_NO_EHT: EHT operation not allowed
++ * @NL80211_RRF_PSD: Ruleset has power spectral density value
++ * @NL80211_RRF_DFS_CONCURRENT: Operation on this channel is allowed for
++ * peer-to-peer or adhoc communication under the control of a DFS master
++ * which operates on the same channel (FCC-594280 D01 Section B.3).
++ * Should be used together with %NL80211_RRF_DFS only.
++ * @NL80211_RRF_NO_6GHZ_VLP_CLIENT: Client connection to VLP AP not allowed
++ * @NL80211_RRF_NO_6GHZ_AFC_CLIENT: Client connection to AFC AP not allowed
++ * @NL80211_RRF_ALLOW_6GHZ_VLP_AP: Very low power (VLP) AP can be permitted
++ * despite NO_IR configuration.
+ */
+ enum nl80211_reg_rule_flags {
+ NL80211_RRF_NO_OFDM = 1<<0,
+@@ -4471,6 +4574,11 @@ enum nl80211_reg_rule_flags {
+ NL80211_RRF_NO_HE = 1<<17,
+ NL80211_RRF_NO_320MHZ = 1<<18,
+ NL80211_RRF_NO_EHT = 1<<19,
++ NL80211_RRF_PSD = 1<<20,
++ NL80211_RRF_DFS_CONCURRENT = 1<<21,
++ NL80211_RRF_NO_6GHZ_VLP_CLIENT = 1<<22,
++ NL80211_RRF_NO_6GHZ_AFC_CLIENT = 1<<23,
++ NL80211_RRF_ALLOW_6GHZ_VLP_AP = 1<<24,
+ };
+
+ #define NL80211_RRF_PASSIVE_SCAN NL80211_RRF_NO_IR
+@@ -4479,6 +4587,8 @@ enum nl80211_reg_rule_flags {
+ #define NL80211_RRF_NO_HT40 (NL80211_RRF_NO_HT40MINUS |\
+ NL80211_RRF_NO_HT40PLUS)
+ #define NL80211_RRF_GO_CONCURRENT NL80211_RRF_IR_CONCURRENT
++#define NL80211_RRF_NO_UHB_VLP_CLIENT NL80211_RRF_NO_6GHZ_VLP_CLIENT
++#define NL80211_RRF_NO_UHB_AFC_CLIENT NL80211_RRF_NO_6GHZ_AFC_CLIENT
+
+ /* For backport compatibility with older userspace */
+ #define NL80211_RRF_NO_IR_ALL (NL80211_RRF_NO_IR | __NL80211_RRF_NO_IBSS)
+@@ -4593,6 +4703,7 @@ enum nl80211_survey_info {
+ * overrides all other flags.
+ * @NL80211_MNTR_FLAG_ACTIVE: use the configured MAC address
+ * and ACK incoming unicast packets.
++ * @NL80211_MNTR_FLAG_SKIP_TX: do not pass local tx packets
+ *
+ * @__NL80211_MNTR_FLAG_AFTER_LAST: internal use
+ * @NL80211_MNTR_FLAG_MAX: highest possible monitor flag
+@@ -4605,6 +4716,7 @@ enum nl80211_mntr_flags {
+ NL80211_MNTR_FLAG_OTHER_BSS,
+ NL80211_MNTR_FLAG_COOK_FRAMES,
+ NL80211_MNTR_FLAG_ACTIVE,
++ NL80211_MNTR_FLAG_SKIP_TX,
+
+ /* keep last */
+ __NL80211_MNTR_FLAG_AFTER_LAST,
+@@ -4625,8 +4737,8 @@ enum nl80211_mntr_flags {
+ * alternate between Active and Doze states, but may not wake up
+ * for neighbor's beacons.
+ *
+- * @__NL80211_MESH_POWER_AFTER_LAST - internal use
+- * @NL80211_MESH_POWER_MAX - highest possible power save level
++ * @__NL80211_MESH_POWER_AFTER_LAST: internal use
++ * @NL80211_MESH_POWER_MAX: highest possible power save level
+ */
+
+ enum nl80211_mesh_power_mode {
+@@ -5008,6 +5120,36 @@ enum nl80211_bss_scan_width {
+ };
+
+ /**
++ * enum nl80211_bss_use_for - bitmap indicating possible BSS use
++ * @NL80211_BSS_USE_FOR_NORMAL: Use this BSS for normal "connection",
++ * including IBSS/MBSS depending on the type.
++ * @NL80211_BSS_USE_FOR_MLD_LINK: This BSS can be used as a link in an
++ * MLO connection. Note that for an MLO connection, all links including
++ * the assoc link must have this flag set, and the assoc link must
++ * additionally have %NL80211_BSS_USE_FOR_NORMAL set.
++ */
++enum nl80211_bss_use_for {
++ NL80211_BSS_USE_FOR_NORMAL = 1 << 0,
++ NL80211_BSS_USE_FOR_MLD_LINK = 1 << 1,
++};
++
++/**
++ * enum nl80211_bss_cannot_use_reasons - reason(s) connection to a
++ * BSS isn't possible
++ * @NL80211_BSS_CANNOT_USE_NSTR_NONPRIMARY: NSTR nonprimary links aren't
++ * supported by the device, and this BSS entry represents one.
++ * @NL80211_BSS_CANNOT_USE_6GHZ_PWR_MISMATCH: STA is not supporting
++ * the AP power type (SP, VLP, AP) that the AP uses.
++ */
++enum nl80211_bss_cannot_use_reasons {
++ NL80211_BSS_CANNOT_USE_NSTR_NONPRIMARY = 1 << 0,
++ NL80211_BSS_CANNOT_USE_6GHZ_PWR_MISMATCH = 1 << 1,
++};
++
++#define NL80211_BSS_CANNOT_USE_UHB_PWR_MISMATCH \
++ NL80211_BSS_CANNOT_USE_6GHZ_PWR_MISMATCH
++
++/**
+ * enum nl80211_bss - netlink attributes for a BSS
+ *
+ * @__NL80211_BSS_INVALID: invalid
+@@ -5038,7 +5180,7 @@ enum nl80211_bss_scan_width {
+ * elements from a Beacon frame (bin); not present if no Beacon frame has
+ * yet been received
+ * @NL80211_BSS_CHAN_WIDTH: channel width of the control channel
+- * (u32, enum nl80211_bss_scan_width)
++ * (u32, enum nl80211_bss_scan_width) - No longer used!
+ * @NL80211_BSS_BEACON_TSF: TSF of the last received beacon (u64)
+ * (not present if no beacon frame has been received yet)
+ * @NL80211_BSS_PRESP_DATA: the data in @NL80211_BSS_INFORMATION_ELEMENTS and
+@@ -5059,6 +5201,14 @@ enum nl80211_bss_scan_width {
+ * @NL80211_BSS_FREQUENCY_OFFSET: frequency offset in KHz
+ * @NL80211_BSS_MLO_LINK_ID: MLO link ID of the BSS (u8).
+ * @NL80211_BSS_MLD_ADDR: MLD address of this BSS if connected to it.
++ * @NL80211_BSS_USE_FOR: u32 bitmap attribute indicating what the BSS can be
++ * used for, see &enum nl80211_bss_use_for.
++ * @NL80211_BSS_CANNOT_USE_REASONS: Indicates the reason that this BSS cannot
++ * be used for all or some of the possible uses by the device reporting it,
++ * even though its presence was detected.
++ * This is a u64 attribute containing a bitmap of values from
++ * &enum nl80211_cannot_use_reasons, note that the attribute may be missing
++ * if no reasons are specified.
+ * @__NL80211_BSS_AFTER_LAST: internal
+ * @NL80211_BSS_MAX: highest BSS attribute
+ */
+@@ -5086,6 +5236,8 @@ enum nl80211_bss {
+ NL80211_BSS_FREQUENCY_OFFSET,
+ NL80211_BSS_MLO_LINK_ID,
+ NL80211_BSS_MLD_ADDR,
++ NL80211_BSS_USE_FOR,
++ NL80211_BSS_CANNOT_USE_REASONS,
+
+ /* keep last */
+ __NL80211_BSS_AFTER_LAST,
+@@ -5434,7 +5586,7 @@ enum nl80211_tx_rate_setting {
+ * (%NL80211_TID_CONFIG_ATTR_TIDS, %NL80211_TID_CONFIG_ATTR_OVERRIDE).
+ * @NL80211_TID_CONFIG_ATTR_PEER_SUPP: same as the previous per-vif one, but
+ * per peer instead.
+- * @NL80211_TID_CONFIG_ATTR_OVERRIDE: flag attribue, if set indicates
++ * @NL80211_TID_CONFIG_ATTR_OVERRIDE: flag attribute, if set indicates
+ * that the new configuration overrides all previous peer
+ * configurations, otherwise previous peer specific configurations
+ * should be left untouched.
+@@ -5606,7 +5758,7 @@ struct nl80211_pattern_support {
+ * "TCP connection wakeup" for more details. This is a nested attribute
+ * containing the exact information for establishing and keeping alive
+ * the TCP connection.
+- * @NL80211_WOWLAN_TRIG_TCP_WAKEUP_MATCH: For wakeup reporting only, the
++ * @NL80211_WOWLAN_TRIG_WAKEUP_TCP_MATCH: For wakeup reporting only, the
+ * wakeup packet was received on the TCP connection
+ * @NL80211_WOWLAN_TRIG_WAKEUP_TCP_CONNLOST: For wakeup reporting only, the
+ * TCP connection was lost or failed to be established
+@@ -5635,6 +5787,8 @@ struct nl80211_pattern_support {
+ * %NL80211_ATTR_SCAN_FREQUENCIES contains more than one
+ * frequency, it means that the match occurred in more than one
+ * channel.
++ * @NL80211_WOWLAN_TRIG_UNPROTECTED_DEAUTH_DISASSOC: For wakeup reporting only.
++ * Wake up happened due to unprotected deauth or disassoc frame in MFP.
+ * @NUM_NL80211_WOWLAN_TRIG: number of wake on wireless triggers
+ * @MAX_NL80211_WOWLAN_TRIG: highest wowlan trigger attribute number
+ *
+@@ -5662,6 +5816,7 @@ enum nl80211_wowlan_triggers {
+ NL80211_WOWLAN_TRIG_WAKEUP_TCP_NOMORETOKENS,
+ NL80211_WOWLAN_TRIG_NET_DETECT,
+ NL80211_WOWLAN_TRIG_NET_DETECT_RESULTS,
++ NL80211_WOWLAN_TRIG_UNPROTECTED_DEAUTH_DISASSOC,
+
+ /* keep last */
+ NUM_NL80211_WOWLAN_TRIG,
+@@ -5817,7 +5972,7 @@ enum nl80211_attr_coalesce_rule {
+
+ /**
+ * enum nl80211_coalesce_condition - coalesce rule conditions
+- * @NL80211_COALESCE_CONDITION_MATCH: coalaesce Rx packets when patterns
++ * @NL80211_COALESCE_CONDITION_MATCH: coalesce Rx packets when patterns
+ * in a rule are matched.
+ * @NL80211_COALESCE_CONDITION_NO_MATCH: coalesce Rx packets when patterns
+ * in a rule are not matched.
+@@ -5916,7 +6071,7 @@ enum nl80211_if_combination_attrs {
+ * enum nl80211_plink_state - state of a mesh peer link finite state machine
+ *
+ * @NL80211_PLINK_LISTEN: initial state, considered the implicit
+- * state of non existent mesh peer links
++ * state of non-existent mesh peer links
+ * @NL80211_PLINK_OPN_SNT: mesh plink open frame has been sent to
+ * this mesh peer
+ * @NL80211_PLINK_OPN_RCVD: mesh plink open frame has been received
+@@ -5952,7 +6107,7 @@ enum nl80211_plink_state {
+ * @NL80211_PLINK_ACTION_BLOCK: block traffic from this mesh peer
+ * @NUM_NL80211_PLINK_ACTIONS: number of possible actions
+ */
+-enum plink_actions {
++enum nl80211_plink_action {
+ NL80211_PLINK_ACTION_NO_ACTION,
+ NL80211_PLINK_ACTION_OPEN,
+ NL80211_PLINK_ACTION_BLOCK,
+@@ -6209,7 +6364,7 @@ enum nl80211_feature_flags {
+ * request to use RRM (see %NL80211_ATTR_USE_RRM) with
+ * %NL80211_CMD_ASSOCIATE and %NL80211_CMD_CONNECT requests, which will set
+ * the ASSOC_REQ_USE_RRM flag in the association request even if
+- * NL80211_FEATURE_QUIET is not advertized.
++ * NL80211_FEATURE_QUIET is not advertised.
+ * @NL80211_EXT_FEATURE_MU_MIMO_AIR_SNIFFER: This device supports MU-MIMO air
+ * sniffer which means that it can be configured to hear packets from
+ * certain groups which can be configured by the
+@@ -6221,13 +6376,15 @@ enum nl80211_feature_flags {
+ * the BSS that the interface that requested the scan is connected to
+ * (if available).
+ * @NL80211_EXT_FEATURE_BSS_PARENT_TSF: Per BSS, this driver reports the
+- * time the last beacon/probe was received. The time is the TSF of the
+- * BSS that the interface that requested the scan is connected to
+- * (if available).
++ * time the last beacon/probe was received. For a non-MLO connection, the
++ * time is the TSF of the BSS that the interface that requested the scan is
++ * connected to (if available). For an MLO connection, the time is the TSF
++ * of the BSS corresponding with link ID specified in the scan request (if
++ * specified).
+ * @NL80211_EXT_FEATURE_SET_SCAN_DWELL: This driver supports configuration of
+ * channel dwell time.
+ * @NL80211_EXT_FEATURE_BEACON_RATE_LEGACY: Driver supports beacon rate
+- * configuration (AP/mesh), supporting a legacy (non HT/VHT) rate.
++ * configuration (AP/mesh), supporting a legacy (non-HT/VHT) rate.
+ * @NL80211_EXT_FEATURE_BEACON_RATE_HT: Driver supports beacon rate
+ * configuration (AP/mesh) with HT rates.
+ * @NL80211_EXT_FEATURE_BEACON_RATE_VHT: Driver supports beacon rate
+@@ -6277,6 +6434,7 @@ enum nl80211_feature_flags {
+ * receiving control port frames over nl80211 instead of the netdevice.
+ * @NL80211_EXT_FEATURE_ACK_SIGNAL_SUPPORT: This driver/device supports
+ * (average) ACK signal strength reporting.
++ * @NL80211_EXT_FEATURE_DATA_ACK_SIGNAL_SUPPORT: Backward-compatible ID
+ * @NL80211_EXT_FEATURE_TXQS: Driver supports FQ-CoDel-enabled intermediate
+ * TXQs.
+ * @NL80211_EXT_FEATURE_SCAN_RANDOM_SN: Driver/device supports randomizing the
+@@ -6301,8 +6459,7 @@ enum nl80211_feature_flags {
+ * @NL80211_EXT_FEATURE_AP_PMKSA_CACHING: Driver/device supports PMKSA caching
+ * (set/del PMKSA operations) in AP mode.
+ *
+- * @NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD: Driver supports
+- * filtering of sched scan results using band specific RSSI thresholds.
++ * @NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD: Obsolete
+ *
+ * @NL80211_EXT_FEATURE_STA_TX_PWR: This driver supports controlling tx power
+ * to a station.
+@@ -6400,6 +6557,22 @@ enum nl80211_feature_flags {
+ * in authentication and deauthentication frames sent to unassociated peer
+ * using @NL80211_CMD_FRAME.
+ *
++ * @NL80211_EXT_FEATURE_OWE_OFFLOAD: Driver/Device wants to do OWE DH IE
++ * handling in station mode.
++ *
++ * @NL80211_EXT_FEATURE_OWE_OFFLOAD_AP: Driver/Device wants to do OWE DH IE
++ * handling in AP mode.
++ *
++ * @NL80211_EXT_FEATURE_DFS_CONCURRENT: The device supports peer-to-peer or
++ * ad hoc operation on DFS channels under the control of a concurrent
++ * DFS master on the same channel as described in FCC-594280 D01
++ * (Section B.3). This, for example, allows P2P GO and P2P clients to
++ * operate on DFS channels as long as there's a concurrent BSS connection.
++ *
++ * @NL80211_EXT_FEATURE_SPP_AMSDU_SUPPORT: The driver has support for SPP
++ * (signaling and payload protected) A-MSDUs and this shall be advertised
++ * in the RSNXE.
++ *
+ * @NUM_NL80211_EXT_FEATURES: number of extended features.
+ * @MAX_NL80211_EXT_FEATURES: highest extended feature index.
+ */
+@@ -6441,7 +6614,7 @@ enum nl80211_ext_feature_index {
+ NL80211_EXT_FEATURE_ENABLE_FTM_RESPONDER,
+ NL80211_EXT_FEATURE_AIRTIME_FAIRNESS,
+ NL80211_EXT_FEATURE_AP_PMKSA_CACHING,
+- NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD,
++ NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD, /* obsolete */
+ NL80211_EXT_FEATURE_EXT_KEY_ID,
+ NL80211_EXT_FEATURE_STA_TX_PWR,
+ NL80211_EXT_FEATURE_SAE_OFFLOAD,
+@@ -6471,6 +6644,10 @@ enum nl80211_ext_feature_index {
+ NL80211_EXT_FEATURE_PUNCT,
+ NL80211_EXT_FEATURE_SECURE_NAN,
+ NL80211_EXT_FEATURE_AUTH_AND_DEAUTH_RANDOM_TA,
++ NL80211_EXT_FEATURE_OWE_OFFLOAD,
++ NL80211_EXT_FEATURE_OWE_OFFLOAD_AP,
++ NL80211_EXT_FEATURE_DFS_CONCURRENT,
++ NL80211_EXT_FEATURE_SPP_AMSDU_SUPPORT,
+
+ /* add new features before the definition below */
+ NUM_NL80211_EXT_FEATURES,
+@@ -6555,7 +6732,7 @@ enum nl80211_timeout_reason {
+ * request parameters IE in the probe request
+ * @NL80211_SCAN_FLAG_ACCEPT_BCAST_PROBE_RESP: accept broadcast probe responses
+ * @NL80211_SCAN_FLAG_OCE_PROBE_REQ_HIGH_TX_RATE: send probe request frames at
+- * rate of at least 5.5M. In case non OCE AP is discovered in the channel,
++ * rate of at least 5.5M. In case non-OCE AP is discovered in the channel,
+ * only the first probe req in the channel will be sent in high rate.
+ * @NL80211_SCAN_FLAG_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION: allow probe request
+ * tx deferral (dot11FILSProbeDelay shall be set to 15ms)
+@@ -6591,7 +6768,7 @@ enum nl80211_timeout_reason {
+ * received on the 2.4/5 GHz channels to actively scan only the 6GHz
+ * channels on which APs are expected to be found. Note that when not set,
+ * the scan logic would scan all 6GHz channels, but since transmission of
+- * probe requests on non PSC channels is limited, it is highly likely that
++ * probe requests on non-PSC channels is limited, it is highly likely that
+ * these channels would passively be scanned. Also note that when the flag
+ * is set, in addition to the colocated APs, PSC channels would also be
+ * scanned if the user space has asked for it.
+@@ -6641,6 +6818,8 @@ enum nl80211_acl_policy {
+ * @NL80211_SMPS_STATIC: static SMPS (use a single antenna)
+ * @NL80211_SMPS_DYNAMIC: dynamic smps (start with a single antenna and
+ * turn on other antennas after CTS/RTS).
++ * @__NL80211_SMPS_AFTER_LAST: internal
++ * @NL80211_SMPS_MAX: highest used enumeration
+ */
+ enum nl80211_smps_mode {
+ NL80211_SMPS_OFF,
+@@ -6671,14 +6850,6 @@ enum nl80211_smps_mode {
+ * applicable for ETSI dfs domain where pre-CAC is valid for ever.
+ * @NL80211_RADAR_CAC_STARTED: Channel Availability Check has been started,
+ * should be generated by HW if NL80211_EXT_FEATURE_DFS_OFFLOAD is enabled.
+- * @NL80211_RADAR_BACKGROUND_CHAN_UPDATE: background channel is updated by the
+- * driver.
+- * @NL80211_RADAR_BACKGROUND_CHAN_EXPAND: background channel is updated by the
+- * driver and required to expand main operating channel.
+- * @NL80211_RADAR_STA_CAC_SKIPPED: STA set the DFS state to available
+- * when receiving CSA/assoc resp
+- * @NL80211_RADAR_STA_CAC_EXPIRED: STA set the DFS state to usable
+- * when STA is disconnected or leaving the channel
+ */
+ enum nl80211_radar_event {
+ NL80211_RADAR_DETECTED,
+@@ -6687,10 +6858,6 @@ enum nl80211_radar_event {
+ NL80211_RADAR_NOP_FINISHED,
+ NL80211_RADAR_PRE_CAC_EXPIRED,
+ NL80211_RADAR_CAC_STARTED,
+- NL80211_RADAR_BACKGROUND_CHAN_UPDATE,
+- NL80211_RADAR_BACKGROUND_CHAN_EXPAND,
+- NL80211_RADAR_STA_CAC_SKIPPED,
+- NL80211_RADAR_STA_CAC_EXPIRED,
+ };
+
+ /**
+@@ -6874,6 +7041,8 @@ enum nl80211_bss_select_attr {
+ * @NL80211_NAN_FUNC_PUBLISH: function is publish
+ * @NL80211_NAN_FUNC_SUBSCRIBE: function is subscribe
+ * @NL80211_NAN_FUNC_FOLLOW_UP: function is follow-up
++ * @__NL80211_NAN_FUNC_TYPE_AFTER_LAST: internal use
++ * @NL80211_NAN_FUNC_MAX_TYPE: internal use
+ */
+ enum nl80211_nan_function_type {
+ NL80211_NAN_FUNC_PUBLISH,
+@@ -6935,7 +7104,7 @@ enum nl80211_nan_func_term_reason {
+ * The instance ID for the follow up Service Discovery Frame. This is u8.
+ * @NL80211_NAN_FUNC_FOLLOW_UP_REQ_ID: relevant if the function's type
+ * is follow up. This is a u8.
+- * The requestor instance ID for the follow up Service Discovery Frame.
++ * The requester instance ID for the follow up Service Discovery Frame.
+ * @NL80211_NAN_FUNC_FOLLOW_UP_DEST: the MAC address of the recipient of the
+ * follow up Service Discovery Frame. This is a binary attribute.
+ * @NL80211_NAN_FUNC_CLOSE_RANGE: is this function limited for devices in a
+@@ -7034,7 +7203,7 @@ enum nl80211_nan_match_attributes {
+ };
+
+ /**
+- * nl80211_external_auth_action - Action to perform with external
++ * enum nl80211_external_auth_action - Action to perform with external
+ * authentication request. Used by NL80211_ATTR_EXTERNAL_AUTH_ACTION.
+ * @NL80211_EXTERNAL_AUTH_START: Start the authentication.
+ * @NL80211_EXTERNAL_AUTH_ABORT: Abort the ongoing authentication.
+@@ -7052,7 +7221,7 @@ enum nl80211_external_auth_action {
+ * @NL80211_FTM_RESP_ATTR_LCI: The content of Measurement Report Element
+ * (9.4.2.22 in 802.11-2016) with type 8 - LCI (9.4.2.22.10),
+ * i.e. starting with the measurement token
+- * @NL80211_FTM_RESP_ATTR_CIVIC: The content of Measurement Report Element
++ * @NL80211_FTM_RESP_ATTR_CIVICLOC: The content of Measurement Report Element
+ * (9.4.2.22 in 802.11-2016) with type 11 - Civic (Section 9.4.2.22.13),
+ * i.e. starting with the measurement token
+ * @__NL80211_FTM_RESP_ATTR_LAST: Internal
+@@ -7325,7 +7494,7 @@ enum nl80211_peer_measurement_attrs {
+ * @NL80211_PMSR_FTM_CAPA_ATTR_TRIGGER_BASED: flag attribute indicating if
+ * trigger based ranging measurement is supported
+ * @NL80211_PMSR_FTM_CAPA_ATTR_NON_TRIGGER_BASED: flag attribute indicating
+- * if non trigger based ranging measurement is supported
++ * if non-trigger-based ranging measurement is supported
+ *
+ * @NUM_NL80211_PMSR_FTM_CAPA_ATTR: internal
+ * @NL80211_PMSR_FTM_CAPA_ATTR_MAX: highest attribute number
+@@ -7379,7 +7548,7 @@ enum nl80211_peer_measurement_ftm_capa {
+ * if neither %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED nor
+ * %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set, EDCA based
+ * ranging will be used.
+- * @NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED: request non trigger based
++ * @NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED: request non-trigger-based
+ * ranging measurement (flag)
+ * This attribute and %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED are
+ * mutually exclusive.
+@@ -7457,7 +7626,7 @@ enum nl80211_peer_measurement_ftm_failur
+ * @NL80211_PMSR_FTM_RESP_ATTR_NUM_FTMR_ATTEMPTS: number of FTM Request frames
+ * transmitted (u32, optional)
+ * @NL80211_PMSR_FTM_RESP_ATTR_NUM_FTMR_SUCCESSES: number of FTM Request frames
+- * that were acknowleged (u32, optional)
++ * that were acknowledged (u32, optional)
+ * @NL80211_PMSR_FTM_RESP_ATTR_BUSY_RETRY_TIME: retry time received from the
+ * busy peer (u32, seconds)
+ * @NL80211_PMSR_FTM_RESP_ATTR_NUM_BURSTS_EXP: actual number of bursts exponent
+@@ -7618,7 +7787,7 @@ enum nl80211_iftype_akm_attributes {
+ * @NL80211_FILS_DISCOVERY_ATTR_INT_MIN: Minimum packet interval (u32, TU).
+ * Allowed range: 0..10000 (TU = Time Unit)
+ * @NL80211_FILS_DISCOVERY_ATTR_INT_MAX: Maximum packet interval (u32, TU).
+- * Allowed range: 0..10000 (TU = Time Unit)
++ * Allowed range: 0..10000 (TU = Time Unit). If set to 0, the feature is disabled.
+ * @NL80211_FILS_DISCOVERY_ATTR_TMPL: Template data for FILS discovery action
+ * frame including the headers.
+ *
+@@ -7631,7 +7800,6 @@ enum nl80211_fils_discovery_attributes {
+ NL80211_FILS_DISCOVERY_ATTR_INT_MIN,
+ NL80211_FILS_DISCOVERY_ATTR_INT_MAX,
+ NL80211_FILS_DISCOVERY_ATTR_TMPL,
+- NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_INTE,
+
+ /* keep last */
+ __NL80211_FILS_DISCOVERY_ATTR_LAST,
+@@ -7652,7 +7820,8 @@ enum nl80211_fils_discovery_attributes {
+ *
+ * @NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_INT: Maximum packet interval (u32, TU).
+ * Allowed range: 0..20 (TU = Time Unit). IEEE P802.11ax/D6.0
+- * 26.17.2.3.2 (AP behavior for fast passive scanning).
++ * 26.17.2.3.2 (AP behavior for fast passive scanning). If set to 0, the feature is
++ * disabled.
+ * @NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_TMPL: Unsolicited broadcast probe response
+ * frame template (binary).
+ *
+@@ -7695,6 +7864,7 @@ enum nl80211_sae_pwe_mechanism {
+ *
+ * @NL80211_SAR_TYPE_POWER: power limitation specified in 0.25dBm unit
+ *
++ * @NUM_NL80211_SAR_TYPE: internal
+ */
+ enum nl80211_sar_type {
+ NL80211_SAR_TYPE_POWER,
+@@ -7708,6 +7878,8 @@ enum nl80211_sar_type {
+ /**
+ * enum nl80211_sar_attrs - Attributes for SAR spec
+ *
++ * @__NL80211_SAR_ATTR_INVALID: Invalid
++ *
+ * @NL80211_SAR_ATTR_TYPE: the SAR type as defined in &enum nl80211_sar_type.
+ *
+ * @NL80211_SAR_ATTR_SPECS: Nested array of SAR power
+@@ -7739,6 +7911,8 @@ enum nl80211_sar_attrs {
+ /**
+ * enum nl80211_sar_specs_attrs - Attributes for SAR power limit specs
+ *
++ * @__NL80211_SAR_ATTR_SPECS_INVALID: Invalid
++ *
+ * @NL80211_SAR_ATTR_SPECS_POWER: Required (s32)value to specify the actual
+ * power limit value in units of 0.25 dBm if type is
+ * NL80211_SAR_TYPE_POWER. (i.e., a value of 44 represents 11 dBm).
+@@ -7853,4 +8027,54 @@ enum nl80211_ap_settings_flags {
+ NL80211_AP_SETTINGS_SA_QUERY_OFFLOAD_SUPPORT = 1 << 1,
+ };
+
++/**
++ * enum nl80211_wiphy_radio_attrs - wiphy radio attributes
++ *
++ * @__NL80211_WIPHY_RADIO_ATTR_INVALID: Invalid
++ *
++ * @NL80211_WIPHY_RADIO_ATTR_INDEX: Index of this radio (u32)
++ * @NL80211_WIPHY_RADIO_ATTR_FREQ_RANGE: Frequency range supported by this
++ * radio. Attribute may be present multiple times.
++ * @NL80211_WIPHY_RADIO_ATTR_INTERFACE_COMBINATION: Supported interface
++ * combination for this radio. Attribute may be present multiple times
++ * and contains attributes defined in &enum nl80211_if_combination_attrs.
++ *
++ * @__NL80211_WIPHY_RADIO_ATTR_LAST: Internal
++ * @NL80211_WIPHY_RADIO_ATTR_MAX: Highest attribute
++ */
++enum nl80211_wiphy_radio_attrs {
++ __NL80211_WIPHY_RADIO_ATTR_INVALID,
++
++ NL80211_WIPHY_RADIO_ATTR_INDEX,
++ NL80211_WIPHY_RADIO_ATTR_FREQ_RANGE,
++ NL80211_WIPHY_RADIO_ATTR_INTERFACE_COMBINATION,
++
++ /* keep last */
++ __NL80211_WIPHY_RADIO_ATTR_LAST,
++ NL80211_WIPHY_RADIO_ATTR_MAX = __NL80211_WIPHY_RADIO_ATTR_LAST - 1,
++};
++
++/**
++ * enum nl80211_wiphy_radio_freq_range - wiphy radio frequency range
++ *
++ * @__NL80211_WIPHY_RADIO_FREQ_ATTR_INVALID: Invalid
++ *
++ * @NL80211_WIPHY_RADIO_FREQ_ATTR_START: Frequency range start (u32).
++ * The unit is kHz.
++ * @NL80211_WIPHY_RADIO_FREQ_ATTR_END: Frequency range end (u32).
++ * The unit is kHz.
++ *
++ * @__NL80211_WIPHY_RADIO_FREQ_ATTR_LAST: Internal
++ * @NL80211_WIPHY_RADIO_FREQ_ATTR_MAX: Highest attribute
++ */
++enum nl80211_wiphy_radio_freq_range {
++ __NL80211_WIPHY_RADIO_FREQ_ATTR_INVALID,
++
++ NL80211_WIPHY_RADIO_FREQ_ATTR_START,
++ NL80211_WIPHY_RADIO_FREQ_ATTR_END,
++
++ __NL80211_WIPHY_RADIO_FREQ_ATTR_LAST,
++ NL80211_WIPHY_RADIO_FREQ_ATTR_MAX = __NL80211_WIPHY_RADIO_FREQ_ATTR_LAST - 1,
++};
++
+ #endif /* __LINUX_NL80211_H */
+--- a/iwinfo_nl80211.c
++++ b/iwinfo_nl80211.c
+@@ -37,6 +37,11 @@
+
+ static struct nl80211_state *nls = NULL;
+
++struct nl80211_if_data {
++ int mode;
++ int radio_idx;
++};
++
+ static void nl80211_close(void)
+ {
+ if (nls)
+@@ -862,7 +867,7 @@ static char * nl80211_phy2ifname(const c
+
+ static int nl80211_get_mode_cb(struct nl_msg *msg, void *arg)
+ {
+- int *mode = arg;
++ struct nl80211_if_data *data = arg;
+ struct nlattr **tb = nl80211_parse(msg);
+ const int ifmodes[NL80211_IFTYPE_MAX + 1] = {
+ IWINFO_OPMODE_UNKNOWN, /* unspecified */
+@@ -878,37 +883,57 @@ static int nl80211_get_mode_cb(struct nl
+ };
+
+ if (tb[NL80211_ATTR_IFTYPE])
+- *mode = ifmodes[nla_get_u32(tb[NL80211_ATTR_IFTYPE])];
++ data->mode = ifmodes[nla_get_u32(tb[NL80211_ATTR_IFTYPE])];
++
++ if (tb[NL80211_ATTR_VIF_RADIO_MASK]) {
++ uint32_t mask = nla_get_u32(tb[NL80211_ATTR_VIF_RADIO_MASK]);
++
++ for (int i = 0; mask && i < 32; i++, mask >>= 1)
++ if (mask & 1)
++ data->radio_idx = i;
++ }
+
+ return NL_SKIP;
+ }
+
+
+-static int nl80211_get_mode(const char *ifname, int *buf)
++static int nl80211_get_if_data(const char *ifname, struct nl80211_if_data *data)
+ {
+ char *res;
+
+- *buf = IWINFO_OPMODE_UNKNOWN;
+-
+ res = nl80211_phy2ifname(ifname);
+
++ data->mode = IWINFO_OPMODE_UNKNOWN;
++ data->radio_idx = -1;
+ nl80211_request(res ? res : ifname, NL80211_CMD_GET_INTERFACE, 0,
+- nl80211_get_mode_cb, buf);
++ nl80211_get_mode_cb, data);
+
+- return (*buf == IWINFO_OPMODE_UNKNOWN) ? -1 : 0;
++ return (data->mode == IWINFO_OPMODE_UNKNOWN) ? -1 : 0;
++}
++
++static int nl80211_get_mode(const char *ifname, int *buf)
++{
++ struct nl80211_if_data data = {};
++ int ret;
++
++ ret = nl80211_get_if_data(ifname, &data);
++ *buf = data.mode;
++
++ return ret;
+ }
+
+ static int __nl80211_hostapd_query(const char *ifname, ...)
+ {
++ struct nl80211_if_data data = {};
+ va_list ap, ap_cur;
+ char *phy, *search, *dest, *key, *val, buf[128];
+- int len, mode, found = 0, match = 1;
++ int len, found = 0, match = 1;
+ FILE *fp;
+
+- if (nl80211_get_mode(ifname, &mode))
++ if (nl80211_get_if_data(ifname, &data))
+ return 0;
+
+- if (mode != IWINFO_OPMODE_MASTER && mode != IWINFO_OPMODE_AP_VLAN)
++ if (data.mode != IWINFO_OPMODE_MASTER && data.mode != IWINFO_OPMODE_AP_VLAN)
+ return 0;
+
+ phy = nl80211_ifname2phy(ifname);
+@@ -916,7 +941,10 @@ static int __nl80211_hostapd_query(const
+ if (!phy)
+ return 0;
+
+- snprintf(buf, sizeof(buf), "/var/run/hostapd-%s.conf", phy);
++ if (data.radio_idx >= 0)
++ snprintf(buf, sizeof(buf), "/var/run/hostapd-%s.%d.conf", phy, data.radio_idx);
++ else
++ snprintf(buf, sizeof(buf), "/var/run/hostapd-%s.conf", phy);
+ fp = fopen(buf, "r");
+
+ if (!fp)
More information about the lede-commits
mailing list