[openwrt/openwrt] bcm53xx: add support for Cisco Meraki MX64/MX65
LEDE Commits
lede-commits at lists.infradead.org
Mon Oct 21 15:42:50 PDT 2024
hauke pushed a commit to openwrt/openwrt.git, branch main:
https://git.openwrt.org/7ad9988287965be2119df320cfc645b0a8b9d94e
commit 7ad9988287965be2119df320cfc645b0a8b9d94e
Author: Matthew Hagan <mnhagan88 at gmail.com>
AuthorDate: Mon Sep 6 22:42:35 2021 +0000
bcm53xx: add support for Cisco Meraki MX64/MX65
This commit adds support for the Cisco Meraki MX64 and MX65 devices which
use the Broadcom NSP SoC, which is compatible with the bcm53xx platform.
MX64 Hardware info:
- CPU: Broadcom BCM58625 Cortex A9 @ 1200Mhz
- RAM: 2 GB (4 x 4Gb SK Hynix H5TC4G83CFR)
- Storage: 1 GB (Micron MT29F8G08ABACA)
- Networking: BCM58625 internal switch (5x 1GbE ports)
- USB: 1x USB2.0
- Serial: Internal header
MX65 Hardware info:
- CPU: Broadcom BCM58625 Cortex A9 @ 1200Mhz
- RAM: 2 GB (4 x 4Gb SK Hynix H5TC4G83CFR)
- Storage: 1 GB (Micron MT29F8G08ABACA)
- Networking: BCM58625 switch (2x 1GbE ports, used for WAN ports 1 & 2)
2x Qualcomm QCA8337 switches (10x 1GbE ports, used for LAN ports 3-12)
- PSE: Broadcom BCM59111KMLG connected to LAN ports 11 & 12
- USB: 1x USB2.0
- Serial: Internal header
Notes:
- The Meraki provided GPL source are available at [2].
- Wireless capability on the MX64W and MX65W exists in the form of 2x
Broadcom BCM43520KMLG, which is not supported. These devices will work
otherwise as standard MX64 or MX65 devices.
- Early MX64 units use an A0 variant of the BCM958625 SoC which lacks
cache coherency and uses a different "secondary-boot-reg". As a
consequence a different device tree is needed.
- Installation of OpenWrt requires changing u-boot to a custom version.
This is due to the stock u-boot "nand read" command being limited to
load only 2MB, in spite of the bootkernel1 and bootkernel2 partitions
both being 3MB in the stock layout. It is also required to allow
booting via USB, enabling cache coherency and setting up the QCA
switches and Serdes link on the MX65. The modified sources for U-boot
are available for the MX64[3] and MX65[4].
- Initial work on this device used a small bootloader within the OEM
partition scheme. To allow booting of larger kernels, UBI and bootm
support has been added, along with ability to store env variables to
the NAND. The Shmoo and newly created env partitions have been moved
to the extra space available after the nvram data.
- Users who installed the previous non-UBI supporting bootloader will
need to convert to the new one before flashing a compatible image.
These steps are detailed below.
References:
[1] https://www.broadcom.com/products/embedded-and-networking-processors/c
ommunications/bcm5862x
[2] https://dl.meraki.net/wired-14-39-mx64-20190426.tar.bz2
[3] https://github.com/clayface/U-boot-MX64-20190430_MX64
[4] https://github.com/clayface/U-boot-MX64-20190430_MX65
Installation guide:
Initial installation steps:
1. Compile or obtain OpenWrt files for the MX64 or MX65, including
u-boot[3][4], initramfs and sysupgrade images.
2. A USB disk with DOS partition scheme and primary FAT partition is
required.
3. If installing onto an MX64, set up a local web server.
4. On the device, boot into diagnostic mode by holding reset when
powering on the device. Continue to hold reset until the orange LED
begins to flash white. On used units the white flash may be difficult
to see.
5. Plug an Ethernet cable into the first LAN port, set the host to
192.168.1.2 and confirm telnet connectivity to 192.168.1.1.
U-boot installation - MX64 Only:
1. Newer fw versions require extra steps to support OpenWrt. To check,
please connect via telnet and run:
`cat /sys/block/mtdblock0/ro`
If the result is 1, your mtd0 is locked will need to perform extra
steps 4 and 5 in this section. If the result is 0 then skip these.
2. Check which SoC is in use by running the following command:
`devmem 0x18000000`
If devmem is not found then try:
`devmem2 0x18000000`
If the output begins with anything between "0x3F00-0x3F03" you will
need to use the A0 release. For any other output, eg "0x3F04" or
higher, use the regular MX64 image.
3 Confirm the size of the device's boot(mtd0) partition. In most
cases it should be 0x100000 or larger. If this is the case, please
proceed to use the uboot_mx64 image. If the reported size is
0x80000, please use the uboot_mx64_small image, then follow the
later guide to change to the larger image.
`cat /proc/mtd`
Example output:
`# cat /proc/mtd
cat /proc/mtd
dev: size erasesize name
mtd0: 00100000 00040000 "boot"
mtd1: 00080000 00040000 "shmoo"
mtd2: 00300000 00040000 "bootkernel1"
mtd3: 00100000 00040000 "nvram"
mtd4: 00300000 00040000 "bootkernel2"
mtd5: 3f700000 00040000 "ubi"
mtd6: 40000000 00040000 "all"`
4. Set up a webserver to serve the appropriate uboot_mx64 from the
following location and verify the SHA512:
https://github.com/clayface/U-boot-MX64-20190430_MX64
5. (Only if mtd0 is locked) You will also need the mtd-rw.ko kernel
module to unlock the partition from the same repo. An mtd executable
is also needed to write the mtd block. Place these on the web server
as well.
6. (Only if mtd0 is locked) Use wget to retrieve the files on the MX64:
`wget http://192.168.1.2/mtd-rw.ko`
`insmod mtd-rw.ko i_want_a_brick=1`
and confirm the unlock is set with dmesg
`mtd-rw: mtd0: setting writeable flag`
7. Download the appropriate u-boot image according to step 3. If you
did not need to unlock the mtd0 partition then use dd to write the
file, with caution:
`wget http://192.168.1.2/uboot_mx64`
`dd if=uboot_mx64 of=/dev/mtdblock0`
If you needed to unlock the mtd0 partition using the mtd-rw module,
run these commands instead to install u-boot instead:
`wget http://192.168.1.2/mtd`
`chmod +x mtd`
`wget http://192.168.1.2/uboot_mx64`
`./mtd write uboot_mx64 /dev/mtd0`
8. Once this has successfully completed, power off the device. If you
did not need to install the small u-boot image, proceed to
"OpenWrt Installation". Otherwise proceed to "UBI supporting
bootloader installation".
U-boot installation - MX65 Only:
1. Obtain telnet access to the MX65.
2. Confirm the size of the device's boot(mtd0) partition. In most
cases it should be 0x100000 or larger. If this is the case, please
proceed to use the uboot_mx65 image. If the reported size is
0x80000, please use the uboot_mx65_small image, then follow the
later guide to change to the larger image.
`cat /proc/mtd`
3. Prepare a USB drive formatted to FAT. Download the appropriate
uboot_mx65 to the USB drive from the following location and verify
the SHA512:
https://github.com/clayface/U-boot-MX64-20190430_MX65
3. Once you have telnet access to the MX65, plug in the USB disk and
run the following commands, with caution. The USB disk should
automount but if it does not, you will need to power off and on
again with reset held. Depending on step 2, use the uboot_mx65 or
uboot_mx65_small image accordingly:
`cd /tmp/media/sda1`
`dd if=uboot_mx65 of=/dev/mtdblock0`
4. Once this has successfully completed, power off the device. If you
did not need to install the small u-boot image, proceed to
"OpenWrt Installation". Otherwise proceed to "UBI supporting
bootloader installation".
UBI supporting bootloader installation:
These steps need to be followed if the older u-boot image was
installed, either because the Meraki diagnostic partition scheme used
0x80000 as the mtd0 size, or because you installed the u-boot provided
while OpenWrt support was still under development. If using OpenWrt,
please make a backup before proceeding.
1. Obtain the relevant image from the MX64(A0) or MX65 u-boot repo:
`openwrt-bcm5862x-generic-meraki_XXXX-initramfs-kernel.bin`
2. With the USB drive already inserted, power on the device while
holding the reset button. A white/orange flashing pattern will
occur shortly after power on. Let go of the reset button. The
device is now booting into OpenWrt initramfs stored on the USB
disk.
3. Connect by SSH to 192.168.1.1 and flash the embedded u-boot image,
changing X as appropriate:
`mtd write /root/uboot_mx6X /dev/mtd0`
You do not need to reboot as this image can handle "Kernel-in-UBI"
OpenWrt installation.
4. You can proceed to obtain and flash the appropriate OpenWrt image
at "OpenWrt Installation" Step 3.
5. Reboot will take significantly longer due to Shmoo calibration. In
case the device does not come online after several minute, power-
cycle the device and see if it boots. If you see an orange/white
flashing pattern, this indicates UBI booting was not successful and
you will need to copy a new bcm53xx image to a USB disk before
booting it and attempting to install OpenWrt again - refer to
"OpenWrt Installation" step 1. Do not attempt to reflash u-boot in
this scenario.
OpenWrt Installation:
1. Having obtained an OpenWrt image, please copy the file
`openwrt-bcm53xx-generic-meraki_XXXX-initramfs.bin`
to the base directory of a FAT formatted USB drive using DOS
partition scheme ,where XXXX is mx64, mx64_a0 or mx65 depending on
which device you have.
2. With the USB drive already inserted, power on the device. Boot time
will be longer than usual while Shmoo calibration takes place. A
different white/orange flashing pattern will eventually occur to
indicate device is now booting into OpenWrt initramfs stored on the
USB disk.
3. Ensuring Ethernet is plugged into a LAN port with IP set in the
192.168.1.0/24 subnet excluding 192.168.1.1, use SCP to copy the
sysupgrade file to 192.168.1.1:/tmp, eg:
`scp openwrt-bcm53xx-generic-meraki_XXXX-squashfs.sysupgrade.bin\
192.168.1.1:/tmp`
4. Connect by SSH to 192.168.1.1 and run sysupgrade:
`sysupgrade \
/tmp/openwrt-bcm53xx-generic-meraki_XXXX-squashfs.sysupgrade.bin`
5. OpenWrt should now be installed on the device.
Signed-off-by: Matthew Hagan <mnhagan88 at gmail.com>
[ Rebase kernel configuration for 6.6,
fix failsafe by making kmod-eeprom-at24 and kmod-dsa-qca8k built-in,
resolve conflicts,
add LED aliases,
fix eth0 MAC address at probe ]
TODO:
- fix multiple LED colors not applied despite aliases - due to custom
/etc/diag.sh
- fix race condition between preinit and probing of the DSA tree,
causing no network interface available in failsafe mode (in general
case - to allow moving drivers back to modules)
Signed-off-by: Lech Perczak <lech.perczak at gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16634
Signed-off-by: Hauke Mehrtens <hauke at hauke-m.de>
---
.../linux/bcm53xx/base-files/etc/board.d/01_leds | 12 ++++
.../bcm53xx/base-files/etc/board.d/02_network | 14 ++++
.../bcm53xx/base-files/lib/upgrade/platform.sh | 11 ++-
target/linux/bcm53xx/config-6.6 | 10 ++-
target/linux/bcm53xx/image/Makefile | 38 ++++++++++
.../332-Meraki-MX6X-partition-fixups.patch | 52 ++++++++++++++
...-meraki-mx6x-add-OpenWrt-specific-LED-ali.patch | 83 ++++++++++++++++++++++
7 files changed, 217 insertions(+), 3 deletions(-)
diff --git a/target/linux/bcm53xx/base-files/etc/board.d/01_leds b/target/linux/bcm53xx/base-files/etc/board.d/01_leds
index aba526b9c3..6f92924f31 100644
--- a/target/linux/bcm53xx/base-files/etc/board.d/01_leds
+++ b/target/linux/bcm53xx/base-files/etc/board.d/01_leds
@@ -4,6 +4,18 @@
board_config_update
case "$(board_name)" in
+meraki,mx64|\
+meraki,mx64-a0)
+ ucidef_set_led_netdev "wan" "WAN Port" "green:activity-9" "wan"
+ ucidef_set_led_netdev "lan1" "LAN Port 1" "green:activity-1" "lan1"
+ ucidef_set_led_netdev "lan2" "LAN Port 2" "green:activity-3" "lan2"
+ ucidef_set_led_netdev "lan3" "LAN Port 3" "green:activity-5" "lan3"
+ ucidef_set_led_netdev "lan4" "LAN Port 4" "green:activity-7" "lan4"
+ ;;
+meraki,mx65)
+ ucidef_set_led_netdev "wan1" "WAN Port 1" "green:activity-1" "wan1"
+ ucidef_set_led_netdev "wan2" "WAN Port 2" "green:activity-3" "wan2"
+ ;;
netgear,r8000)
ucidef_set_led_usbport "usb2" "USB 2.0" "bcm53xx:white:usb2" "usb1-port2" "usb2-port2"
ucidef_set_led_usbport "usb3" "USB 3.0" "bcm53xx:white:usb3" "usb1-port1" "usb2-port1" "usb4-port1"
diff --git a/target/linux/bcm53xx/base-files/etc/board.d/02_network b/target/linux/bcm53xx/base-files/etc/board.d/02_network
index 6d84442da4..19569e7a78 100644
--- a/target/linux/bcm53xx/base-files/etc/board.d/02_network
+++ b/target/linux/bcm53xx/base-files/etc/board.d/02_network
@@ -29,6 +29,14 @@ bcm53xx_setup_interfaces()
meraki,mr32)
ucidef_set_interface_lan "poe" "dhcp"
;;
+ meraki,mx64 | \
+ meraki,mx64-a0)
+ ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
+ ;;
+ meraki,mx65)
+ ucidef_set_interfaces_lan_wan \
+ "lan3 lan4 lan5 lan6 lan7 lan8 lan9 lan10 lan11 lan12" "wan1 wan2"
+ ;;
phicomm,k3)
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" "wan"
;;
@@ -68,6 +76,12 @@ bcm53xx_setup_macs()
ucidef_set_interface_macaddr "lan" "$label_mac"
ucidef_set_label_macaddr "$label_mac"
;;
+ meraki,mx64 | \
+ meraki,mx64-a0 | \
+ meraki,mx65)
+ etXmacaddr=$(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66)
+ offset=1
+ ;;
*)
etXmacaddr=$(nvram get et0macaddr)
offset=1
diff --git a/target/linux/bcm53xx/base-files/lib/upgrade/platform.sh b/target/linux/bcm53xx/base-files/lib/upgrade/platform.sh
index 645688ac7c..dfa333af8b 100644
--- a/target/linux/bcm53xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/bcm53xx/base-files/lib/upgrade/platform.sh
@@ -200,7 +200,10 @@ platform_check_image() {
board="$(board_name)"
case "$board" in
meraki,mr26 | \
- meraki,mr32)
+ meraki,mr32 | \
+ meraki,mx64 | \
+ meraki,mx64-a0 | \
+ meraki,mx65)
# NAND sysupgrade
return 0
;;
@@ -403,6 +406,12 @@ platform_do_upgrade() {
CI_KERNPART="part.safe"
nand_do_upgrade "$1"
;;
+ meraki,mx64 | \
+ meraki,mx64-a0 | \
+ meraki,mx65)
+ REQUIRE_IMAGE_METADATA=1
+ nand_do_upgrade "$1"
+ ;;
*)
platform_other_do_upgrade "$1"
;;
diff --git a/target/linux/bcm53xx/config-6.6 b/target/linux/bcm53xx/config-6.6
index 101bde807f..ace9e7d615 100644
--- a/target/linux/bcm53xx/config-6.6
+++ b/target/linux/bcm53xx/config-6.6
@@ -4,6 +4,7 @@ CONFIG_ARCH_BCM=y
CONFIG_ARCH_BCM_5301X=y
CONFIG_ARCH_BCM_53573=y
CONFIG_ARCH_BCM_IPROC=y
+CONFIG_ARCH_BCM_NSP=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_KEEP_MEMBLOCK=y
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
@@ -34,13 +35,16 @@ CONFIG_ARM_L1_CACHE_SHIFT=6
CONFIG_ARM_L1_CACHE_SHIFT_6=y
CONFIG_ARM_PATCH_IDIV=y
CONFIG_ARM_PATCH_PHYS_VIRT=y
+CONFIG_ARM_SP805_WATCHDOG=y
CONFIG_ARM_THUMB=y
+CONFIG_ARM_TIMER_SP804=y
CONFIG_ARM_UNWIND=y
CONFIG_ARM_VIRT_EXT=y
CONFIG_ATAGS=y
CONFIG_AUTO_ZRELADDR=y
CONFIG_B53=y
CONFIG_B53_MDIO_DRIVER=y
+CONFIG_B53_SERDES=y
CONFIG_B53_SRAB_DRIVER=y
CONFIG_BCM47XX_NVRAM=y
CONFIG_BCM47XX_SPROM=y
@@ -62,7 +66,7 @@ CONFIG_BCM_NS_THERMAL=y
CONFIG_BCM_SR_THERMAL=y
CONFIG_BGMAC=y
CONFIG_BGMAC_BCMA=y
-# CONFIG_BGMAC_PLATFORM is not set
+CONFIG_BGMAC_PLATFORM=y
CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y
CONFIG_BLK_MQ_PCI=y
CONFIG_BOUNCE=y
@@ -289,9 +293,11 @@ CONFIG_PHY_BCM_SR_USB=y
# CONFIG_PHY_BRCM_SATA is not set
# CONFIG_PHY_NS2_USB_DRD is not set
CONFIG_PINCTRL=y
-# CONFIG_PINCTRL_IPROC_GPIO is not set
+CONFIG_PINCTRL_IPROC_GPIO=y
CONFIG_PINCTRL_NS=y
# CONFIG_PINCTRL_NS2_MUX is not set
+CONFIG_PINCTRL_NSP_GPIO=y
+CONFIG_PINCTRL_NSP_MUX=y
CONFIG_PREEMPT_NONE_BUILD=y
CONFIG_PTP_1588_CLOCK_OPTIONAL=y
CONFIG_PWM=y
diff --git a/target/linux/bcm53xx/image/Makefile b/target/linux/bcm53xx/image/Makefile
index 8318450293..ce61ffa468 100644
--- a/target/linux/bcm53xx/image/Makefile
+++ b/target/linux/bcm53xx/image/Makefile
@@ -420,6 +420,44 @@ define Device/meraki_mr32
endef
TARGET_DEVICES += meraki_mr32
+define Device/meraki_mx6x
+ KERNEL_IN_UBI := 1
+ KERNEL_LOADADDR := 0x60008000
+ DEVICE_PACKAGES := -oseama kmod-leds-pwm kmod-usb-ehci \
+ kmod-usb-ohci kmod-usb2 \
+ kmod-ledtrig-default-on kmod-ledtrig-netdev
+ DEVICE_VENDOR := Cisco Meraki
+ KERNEL = kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
+ KERNEL_INITRAMFS := kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
+ KERNEL_INITRAMFS_SUFFIX := .bin
+ IMAGES := sysupgrade.bin
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+endef
+
+define Device/meraki_mx64
+ $(call Device/meraki_mx6x)
+ DEVICE_MODEL := MX64
+ DEVICE_DTS_CONFIG := config at 4
+ DEVICE_DTS := bcm958625-meraki-mx64
+endef
+TARGET_DEVICES += meraki_mx64
+
+define Device/meraki_mx64_a0
+ $(call Device/meraki_mx64)
+ DEVICE_VARIANT := A0
+ DEVICE_DTS_CONFIG := config at 2
+ DEVICE_DTS := bcm958625-meraki-mx64-a0
+endef
+TARGET_DEVICES += meraki_mx64_a0
+
+define Device/meraki_mx65
+ $(call Device/meraki_mx6x)
+ DEVICE_MODEL := MX65
+ DEVICE_DTS_CONFIG := config at 3
+ DEVICE_DTS := bcm958625-meraki-mx65
+endef
+TARGET_DEVICES += meraki_mx65
+
define Device/netgear
DEVICE_VENDOR := NETGEAR
IMAGES := chk
diff --git a/target/linux/bcm53xx/patches-6.6/332-Meraki-MX6X-partition-fixups.patch b/target/linux/bcm53xx/patches-6.6/332-Meraki-MX6X-partition-fixups.patch
new file mode 100644
index 0000000000..9743c99f28
--- /dev/null
+++ b/target/linux/bcm53xx/patches-6.6/332-Meraki-MX6X-partition-fixups.patch
@@ -0,0 +1,52 @@
+From 35bba88e75311242841dde83073c211310ec0259 Mon Sep 17 00:00:00 2001
+From: Matthew Hagan <mnhagan88 at gmail.com>
+Date: Wed, 4 May 2022 08:07:06 +0100
+Subject: [PATCH] bcm53xx: partition fixups for Meraki MX64/MX65
+
+We need to enlarge the u-boot partition to add extra features like UBI
+booting. The shmoo and newly created env partitions can easily be moved
+to the nvram partition. This fixup allows u-boot to be enlarged to up to
+1MiB.
+
+Signed-off-by: Matthew Hagan <mnhagan88 at gmail.com>
+---
+ arch/arm/boot/dts/broadcom/bcm958625-meraki-mx6x-common.dtsi | 20 ++++++++++++--------
+ 1 file changed, 12 insertions(+), 8 deletions(-)
+
+--- a/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx6x-common.dtsi
++++ b/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx6x-common.dtsi
+@@ -84,13 +84,7 @@
+
+ partition at 0 {
+ label = "u-boot";
+- reg = <0x0 0x80000>;
+- read-only;
+- };
+-
+- partition at 80000 {
+- label = "shmoo";
+- reg = <0x80000 0x80000>;
++ reg = <0x0 0x100000>;
+ read-only;
+ };
+
+@@ -101,7 +95,18 @@
+
+ partition at 400000 {
+ label = "nvram";
+- reg = <0x400000 0x100000>;
++ reg = <0x400000 0x40000>;
++ };
++
++ partition at 440000 {
++ label = "u-boot-env";
++ reg = <0x440000 0x40000>;
++ };
++
++ partition at 480000 {
++ label = "shmoo";
++ reg = <0x480000 0x80000>;
++ read-only;
+ };
+
+ partition at 500000 {
diff --git a/target/linux/bcm53xx/patches-6.6/333-bcm53xx-dts-meraki-mx6x-add-OpenWrt-specific-LED-ali.patch b/target/linux/bcm53xx/patches-6.6/333-bcm53xx-dts-meraki-mx6x-add-OpenWrt-specific-LED-ali.patch
new file mode 100644
index 0000000000..950e85be9c
--- /dev/null
+++ b/target/linux/bcm53xx/patches-6.6/333-bcm53xx-dts-meraki-mx6x-add-OpenWrt-specific-LED-ali.patch
@@ -0,0 +1,83 @@
+From 9f4e68261b89df87457f46999c471d11754b5de2 Mon Sep 17 00:00:00 2001
+From: Lech Perczak <lech.perczak at gmail.com>
+Date: Sun, 6 Oct 2024 15:57:44 +0200
+Subject: [PATCH] bcm53xx: dts: meraki-mx6x: add OpenWrt-specific LED aliases
+
+Assign green power LED for "boot", "running", orange for "upgrade" and
+red for "failsafe" functions - the same as done for MR33 and MR74.
+
+Signed-off-by: Lech Perczak <lech.perczak at gmail.com>
+---
+ arch/arm/boot/dts/broadcom/bcm958625-meraki-alamo.dtsi | 9 ++++++++-
+ arch/arm/boot/dts/broadcom/bcm958625-meraki-kingpin.dtsi | 8 +++++++-
+ .../boot/dts/broadcom/bcm958625-meraki-mx6x-common.dtsi | 4 ++--
+ 3 files changed, 17 insertions(+), 4 deletions(-)
+
+--- a/arch/arm/boot/dts/broadcom/bcm958625-meraki-alamo.dtsi
++++ b/arch/arm/boot/dts/broadcom/bcm958625-meraki-alamo.dtsi
+@@ -8,6 +8,13 @@
+ #include "bcm958625-meraki-mx6x-common.dtsi"
+
+ / {
++ aliases {
++ led-boot = &led_power;
++ led-running = &led_power;
++ led-upgrade = &led_fault;
++ led-failsafe = &led_failsafe;
++ };
++
+ keys {
+ compatible = "gpio-keys-polled";
+ autorepeat;
+@@ -55,7 +62,7 @@
+ gpios = <&gpioa 26 GPIO_ACTIVE_LOW>;
+ };
+
+- led-4 {
++ led_fault: led-4 {
+ /* amber:power */
+ function = LED_FUNCTION_FAULT;
+ color = <LED_COLOR_ID_AMBER>;
+--- a/arch/arm/boot/dts/broadcom/bcm958625-meraki-kingpin.dtsi
++++ b/arch/arm/boot/dts/broadcom/bcm958625-meraki-kingpin.dtsi
+@@ -8,6 +8,12 @@
+ #include "bcm958625-meraki-mx6x-common.dtsi"
+
+ / {
++ aliases {
++ led-boot = &led_power;
++ led-running = &led_power;
++ led-upgrade = &led_fault;
++ led-failsafe = &led_failsafe;
++ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+@@ -104,7 +110,7 @@
+ gpios = <&gpioa 29 GPIO_ACTIVE_LOW>;
+ };
+
+- led-a {
++ led_fault: led-a {
+ /* amber:power */
+ function = LED_FUNCTION_FAULT;
+ color = <LED_COLOR_ID_AMBER>;
+--- a/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx6x-common.dtsi
++++ b/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx6x-common.dtsi
+@@ -14,14 +14,14 @@
+ pwm-leds {
+ compatible = "pwm-leds";
+
+- led-1 {
++ led_failsafe: led-1 {
+ function = LED_FUNCTION_INDICATOR;
+ color = <LED_COLOR_ID_RED>;
+ pwms = <&pwm 1 50000>;
+ max-brightness = <255>;
+ };
+
+- led-2 {
++ led_power: led-2 {
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
+ pwms = <&pwm 2 50000>;
More information about the lede-commits
mailing list