[openwrt/openwrt] ath79: add support for NEC Aterm WG1800HP2
LEDE Commits
lede-commits at lists.infradead.org
Sat Oct 19 08:57:49 PDT 2024
hauke pushed a commit to openwrt/openwrt.git, branch main:
https://git.openwrt.org/cba40405f53d032600e7a2a595502dc9da0ea781
commit cba40405f53d032600e7a2a595502dc9da0ea781
Author: INAGAKI Hiroshi <musashino.open at gmail.com>
AuthorDate: Sat Jun 29 21:57:23 2024 +0900
ath79: add support for NEC Aterm WG1800HP2
NEC Aterm WG1800HP2 is a 2.4/5 GHz band 11ac (Wi-Fi 5) router, based on
QCA9558.
Specification:
- SoC : Qualcomm Atheros QCA9558
- RAM : DDR2 128 MiB (2x Nanya NT5TU32M16DG-AC)
- Flash : SPI-NOR 16 MiB (Macronix MX25L12845EMI-10G)
- WLAN : 2.4/5 GHz
- 2.4 GHz : 3T3R (Qualcomm Atheros QCA9558 (SoC))
- 5 GHz : 3T3R (Qualcomm Atheros QCA9880)
- Ethernet : 5x 10/100/1000 Mbps
- switch : Atheros AR8327
- LEDs/Keys (GPIO) : 12x/5x
- UART : through-hole on PCB
- assignment : 3.3V, GND, NC, TX, RX from tri-angle marking
- settings : 9600n8
- USB : 1x USB 2.0 Type-A
- hub (internal) : NEC uPD720114
- Power : 12 VDC, 1.5 A (Max. 17 W)
- Stock OS : NetBSD based
Flash instruction using initramfs-factory.bin image (StockFW WebUI):
1. Boot WG1800HP2 with router mode normally
2. Access to the WebUI ("http://aterm.me/" or "http://192.168.0.1/") on
the device and open firmware update page ("ファームウェア更新")
3. Select the OpenWrt initramfs-factory.bin image and click update
("更新") button
4. After updating, the device will be rebooted and booted with OpenWrt
initramfs image
5. On the initramfs image, upload (or download) uboot.bin and
sysupgrade.bin image to the device
6. Replace the bootloader with a uboot.bin image
mtd write <uboot.bin image> bootloader
7. Perform sysupgrade with a sysupgrade.bin image
sysupgrade <sysupgrade image>
8. Wait ~120 seconds to complete flashing
Flash instruction using initramfs-factory.bin image (bootloader CLI):
1. Connect and open serial console
2. Power on WG1800HP2 and interrupt bootloader by ESC key
3. Login to the bootloader CLI with a password "chiron"
4. Start TFTP server by "tftpd" command
5. Upload initramfs-factory.bin via tftp from your computer
example (Windows): tftp -i 192.168.0.1 PUT initramfs-factory.bin
6. Boot initramfs image by "boot" command
7. On the initramfs image, back up the stock bootloader and firmware if
needed
8. Upload (or download) uboot.bin and sysupgrade.bin image to the device
9. Replace the bootloader with a uboot.bin image
10. Perform sysupgrade with a sysupgrade.bin image
11. Wait ~120 seconds to complete flashing
Notes:
- All LEDs are connected to the TI TCA6416A (marking: PH416A) I2C
Expander chip.
- The stock bootloader requires an unknown filesystem on firmware area
in the flash. Booting of OpenWrt from that filesystem cannot be
handled, so the bootloader needs to be replaced to mainline U-Boot
before OpenWrt installation.
MAC addresses:
LAN : A4:12:42:xx:xx:44 (config, 0x6 (hex))
WAN : A4:12:42:xx:xx:45 (config, 0xc (hex))
2.4 GHz: A4:12:42:xx:xx:46 (config, 0x0 (hex))
5 GHz : A4:12:42:xx:xx:47 (config, 0x12 (hex))
Signed-off-by: INAGAKI Hiroshi <musashino.open at gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16297
Signed-off-by: Hauke Mehrtens <hauke at hauke-m.de>
---
target/linux/ath79/dts/qca9558_nec_wg1800hp2.dts | 12 ++++++++++++
target/linux/ath79/generic/base-files/etc/board.d/02_network | 1 +
.../linux/ath79/generic/base-files/lib/upgrade/platform.sh | 3 ++-
target/linux/ath79/image/generic.mk | 10 ++++++++++
target/linux/ath79/image/lzma-loader/src/board.c | 7 +++++--
5 files changed, 30 insertions(+), 3 deletions(-)
diff --git a/target/linux/ath79/dts/qca9558_nec_wg1800hp2.dts b/target/linux/ath79/dts/qca9558_nec_wg1800hp2.dts
new file mode 100644
index 0000000000..39dec5b2c4
--- /dev/null
+++ b/target/linux/ath79/dts/qca9558_nec_wg1800hp2.dts
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9558_nec_aterm.dtsi"
+
+/ {
+ compatible = "nec,wg1800hp2", "qca,qca9558";
+ model = "NEC Aterm WG1800HP2";
+};
+
+ð0 {
+ pll-data = <0x96000000 0x00000101 0x00001616>;
+};
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network
index 759508d386..2ad4c899e0 100644
--- a/target/linux/ath79/generic/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network
@@ -191,6 +191,7 @@ ath79_setup_interfaces()
belkin,f9k1115-v2|\
nec,wg1400hp|\
nec,wg1800hp|\
+ nec,wg1800hp2|\
tplink,archer-c5-v1|\
tplink,archer-c7-v1|\
tplink,archer-c7-v2|\
diff --git a/target/linux/ath79/generic/base-files/lib/upgrade/platform.sh b/target/linux/ath79/generic/base-files/lib/upgrade/platform.sh
index d17e03c748..0e314dd311 100644
--- a/target/linux/ath79/generic/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ath79/generic/base-files/lib/upgrade/platform.sh
@@ -18,7 +18,8 @@ platform_check_image() {
platform_check_image_redboot_fis "$1"
;;
nec,wg1400hp|\
- nec,wg1800hp)
+ nec,wg1800hp|\
+ nec,wg1800hp2)
local uboot_mtd=$(find_mtd_part "bootloader")
# check "U-Boot <year>.<month>" string in the "bootloader" partition
diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk
index 94c248541d..5990f9f177 100644
--- a/target/linux/ath79/image/generic.mk
+++ b/target/linux/ath79/image/generic.mk
@@ -2081,6 +2081,16 @@ define Device/nec_wg1800hp
endef
TARGET_DEVICES += nec_wg1800hp
+define Device/nec_wg1800hp2
+ SOC := qca9558
+ DEVICE_MODEL := Aterm WG1800HP2
+ IMAGE_SIZE := 16128k
+ NEC_FW_TYPE := H049
+ $(Device/nec-netbsd-aterm)
+ DEVICE_PACKAGES += kmod-ath10k-ct ath10k-firmware-qca988x-ct
+endef
+TARGET_DEVICES += nec_wg1800hp2
+
define Device/nec_wg800hp
SOC := qca9563
DEVICE_VENDOR := NEC
diff --git a/target/linux/ath79/image/lzma-loader/src/board.c b/target/linux/ath79/image/lzma-loader/src/board.c
index 2e56601024..1445108508 100644
--- a/target/linux/ath79/image/lzma-loader/src/board.c
+++ b/target/linux/ath79/image/lzma-loader/src/board.c
@@ -53,7 +53,8 @@ static inline void tlwr1043nd_init(void) {}
#if defined(CONFIG_BOARD_MERAKI_MR18) || \
defined(CONFIG_BOARD_NEC_WG1400HP) || \
- defined(CONFIG_BOARD_NEC_WG1800HP)
+ defined(CONFIG_BOARD_NEC_WG1800HP) || \
+ defined(CONFIG_BOARD_NEC_WG1800HP2)
static int extract_qca955x_sgmii_res_cal(void)
{
@@ -219,6 +220,7 @@ static inline void huawei_ap_init(void) {}
#if defined(CONFIG_BOARD_NEC_WG1400HP) || \
defined(CONFIG_BOARD_NEC_WG1800HP) || \
+ defined(CONFIG_BOARD_NEC_WG1800HP2) || \
defined(CONFIG_BOARD_NEC_WG600HP) || \
defined(CONFIG_BOARD_NEC_WR8750N) || \
defined(CONFIG_BOARD_NEC_WR9500N)
@@ -293,7 +295,8 @@ static inline void nec_aterm_init(void)
WRITEREG(reg + AR934X_RESET_REG_RESET_MODULE, val);
}
#elif defined(CONFIG_BOARD_NEC_WG1400HP) || \
- defined(CONFIG_BOARD_NEC_WG1800HP)
+ defined(CONFIG_BOARD_NEC_WG1800HP) || \
+ defined(CONFIG_BOARD_NEC_WG1800HP2)
#define QCA955X_GMAC_MR_AN_CONTROL_PHY_RESET_MASK BIT(15)
#define QCA955X_GMAC_MR_AN_CONTROL_FULL_DUPLEX_MASK BIT(8)
More information about the lede-commits
mailing list