[openwrt/openwrt] Revert "ath79: elecom,wab: use nvmem"
LEDE Commits
lede-commits at lists.infradead.org
Fri Nov 29 06:02:51 PST 2024
robimarko pushed a commit to openwrt/openwrt.git, branch main:
https://git.openwrt.org/af611bce44d3dcffd47c47f46b95400445498be9
commit af611bce44d3dcffd47c47f46b95400445498be9
Author: INAGAKI Hiroshi <musashino.open at gmail.com>
AuthorDate: Wed Nov 27 10:31:35 2024 +0900
Revert "ath79: elecom,wab: use nvmem"
This reverts commit 70e41d0205d95386881fa1cdf6ee00f6cca1b3f6.
"ethaddr" is stored into the "u-boot-env" (stock: "Config") partition
and it's quoted with double-quotations, but that format is not supported
by the current NVMEM u-boot-env driver (and mac_pton() function) and the
MAC address won't be parsed to byte array.
This causes random MAC addresses on the adapters, so revert the above
commit.
Signed-off-by: INAGAKI Hiroshi <musashino.open at gmail.com>
Link: https://github.com/openwrt/openwrt/pull/17116
Signed-off-by: Robert Marko <robimarko at gmail.com>
---
target/linux/ath79/dts/qca955x_elecom_wab.dtsi | 17 ++++-------------
.../ath79/generic/base-files/etc/board.d/02_network | 3 +++
.../base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac | 10 ++++++++++
3 files changed, 17 insertions(+), 13 deletions(-)
diff --git a/target/linux/ath79/dts/qca955x_elecom_wab.dtsi b/target/linux/ath79/dts/qca955x_elecom_wab.dtsi
index 53bb5b0141..43e34c6029 100644
--- a/target/linux/ath79/dts/qca955x_elecom_wab.dtsi
+++ b/target/linux/ath79/dts/qca955x_elecom_wab.dtsi
@@ -8,7 +8,6 @@
/ {
aliases {
- label-mac-device = ð0;
led-boot = &led_status;
led-failsafe = &led_status;
led-upgrade = &led_status;
@@ -108,9 +107,6 @@
phy-mode = "rgmii-rxid";
pll-data = <0xae000000 0x80000101 0x80001313>;
- nvmem-cells = <&macaddr_uboot_ethaddr 0>;
- nvmem-cell-names = "mac-address";
-
gmac-config {
device = <&gmac>;
@@ -148,8 +144,8 @@
wifi at 0,0 {
compatible = "qcom,ath10k";
reg = <0x0000 0 0 0 0>;
- nvmem-cells = <&cal_art_5000>, <&macaddr_uboot_ethaddr 1>;
- nvmem-cell-names = "calibration", "mac-address";
+ nvmem-cells = <&cal_art_5000>;
+ nvmem-cell-names = "calibration";
};
};
@@ -173,14 +169,9 @@
};
partition at 40000 {
- compatible = "u-boot,env";
label = "u-boot-env";
reg = <0x40000 0x10000>;
read-only;
-
- macaddr_uboot_ethaddr: ethaddr {
- #nvmem-cell-cells = <1>;
- };
};
partition at 50000 {
@@ -261,6 +252,6 @@
&wmac {
status = "okay";
- nvmem-cells = <&cal_art_1000>, <&macaddr_uboot_ethaddr 0>;
- nvmem-cell-names = "calibration", "mac-address";
+ nvmem-cells = <&cal_art_1000>;
+ nvmem-cell-names = "calibration";
};
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network
index 2bd97442d9..016bd6bb51 100644
--- a/target/linux/ath79/generic/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network
@@ -717,6 +717,9 @@ ath79_setup_macs()
lan_mac=$(mtd_get_mac_ascii devdata "lanmac")
wan_mac=$(mtd_get_mac_ascii devdata "wanmac")
;;
+ elecom,wab-i1750-ps|\
+ elecom,wab-s1167-ps|\
+ elecom,wab-s600-ps|\
engenius,ecb1200|\
engenius,ecb1750)
lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac b/target/linux/ath79/generic/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
index 6676e4d509..5155d240a8 100644
--- a/target/linux/ath79/generic/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
+++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
@@ -42,6 +42,16 @@ case "$board" in
[ "$PHYNBR" -eq 1 ] && \
mtd_get_mac_ascii bdcfg "wlanmac" > /sys${DEVPATH}/macaddress
;;
+ elecom,wab-i1750-ps|\
+ elecom,wab-s1167-ps|\
+ elecom,wab-s600-ps)
+ # set the 5G MAC address (= ethaddr + 1)
+ [ "$PHYNBR" -eq 0 ] && \
+ macaddr_add "$(mtd_get_mac_ascii u-boot-env ethaddr)" 1 > /sys${DEVPATH}/macaddress
+ # set the 2.4G MAC address (= ethaddr)
+ [ "$PHYNBR" -eq 1 ] && \
+ mtd_get_mac_ascii u-boot-env "ethaddr" > /sys${DEVPATH}/macaddress
+ ;;
engenius,ecb1200|\
engenius,ecb1750)
[ "$PHYNBR" -eq 0 ] && \
More information about the lede-commits
mailing list