[openwrt/openwrt] mediatek: add support for Acer Predator W6d and Acer Vero W6m
LEDE Commits
lede-commits at lists.infradead.org
Sat Nov 23 10:47:18 PST 2024
hauke pushed a commit to openwrt/openwrt.git, branch main:
https://git.openwrt.org/2898d1d1269a841e5bb8673801bd2a04ad120031
commit 2898d1d1269a841e5bb8673801bd2a04ad120031
Author: George Oldfort <openwrt at 10099.de>
AuthorDate: Mon Nov 11 11:18:19 2024 +0100
mediatek: add support for Acer Predator W6d and Acer Vero W6m
This commit adds support for two variants of the already supported router
Acer Predator Connect W6: The Acer Predator Connect W6d (W6 without 6 GHz
wifi) and the Acer Connect Vero W6m (W6 without 2.5G eth1 port, usb3 port,
and the 6 on-board gpio RGB LEDs, and with a KTD2026 RGB LED controller
instead of the KTD2061 LED controller of the W6/W6d).
The device tree for the W6m refers to the KTD202x driver suggested in
PR #16860.
Patching target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh
removes the code repetition in (old) lines 121 to 124 on the occasion.
This is the last of four commits into which the original commit was split
to make reviews easier and more targeted.
Signed-off-by: George Oldfort <openwrt at 10099.de>
Link: https://github.com/openwrt/openwrt/pull/16861
Signed-off-by: Hauke Mehrtens <hauke at hauke-m.de>
---
package/boot/uboot-envtools/files/mediatek_filogic | 2 +
.../mediatek/dts/mt7986a-acer-predator-w6d.dts | 182 +++++++++++++++++++++
.../linux/mediatek/dts/mt7986a-acer-vero-w6m.dts | 66 ++++++++
.../filogic/base-files/etc/board.d/02_network | 10 +-
.../etc/hotplug.d/ieee80211/11_fix_wifi_mac | 7 +-
.../base-files/lib/preinit/10_fix_eth_mac.sh | 11 +-
.../filogic/base-files/lib/upgrade/platform.sh | 16 +-
target/linux/mediatek/image/filogic.mk | 30 ++++
8 files changed, 312 insertions(+), 12 deletions(-)
diff --git a/package/boot/uboot-envtools/files/mediatek_filogic b/package/boot/uboot-envtools/files/mediatek_filogic
index 7571af0020..b637f43287 100644
--- a/package/boot/uboot-envtools/files/mediatek_filogic
+++ b/package/boot/uboot-envtools/files/mediatek_filogic
@@ -50,6 +50,8 @@ zyxel,ex5601-t0-ubootmod)
ubootenv_add_ubi_default
;;
acer,predator-w6|\
+acer,predator-w6d|\
+acer,vero-w6m|\
glinet,gl-mt2500|\
glinet,gl-mt6000|\
glinet,gl-x3000|\
diff --git a/target/linux/mediatek/dts/mt7986a-acer-predator-w6d.dts b/target/linux/mediatek/dts/mt7986a-acer-predator-w6d.dts
new file mode 100644
index 0000000000..b2c35a6197
--- /dev/null
+++ b/target/linux/mediatek/dts/mt7986a-acer-predator-w6d.dts
@@ -0,0 +1,182 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+/dts-v1/;
+#include "mt7986a-acer-w6-common.dtsi"
+
+/ {
+ model = "Acer Predator Connect W6d";
+ compatible = "acer,predator-w6d", "mediatek,mt7986a";
+
+ aliases {
+ serial0 = &uart0;
+ led-boot = &led_status_blue;
+ led-failsafe = &led_status_blue;
+ led-running = &led_status_green;
+ led-upgrade = &led_status_red;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_status_red: led-0 {
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_STATUS;
+ function-enumerator = <0>;
+ gpios = <&pio 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_status_green: led-1 {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_STATUS;
+ function-enumerator = <0>;
+ gpios = <&pio 2 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_status_blue: led-2 {
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_STATUS;
+ function-enumerator = <0>;
+ gpios = <&pio 36 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-3 {
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_STATUS;
+ function-enumerator = <1>;
+ gpios = <&pio 35 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-4 {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_STATUS;
+ function-enumerator = <1>;
+ gpios = <&pio 34 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-5 {
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_STATUS;
+ function-enumerator = <1>;
+ gpios = <&pio 33 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-6 {
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_STATUS;
+ function-enumerator = <2>;
+ gpios = <&pio 38 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-7 {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_STATUS;
+ function-enumerator = <2>;
+ gpios = <&pio 37 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-8 {
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_STATUS;
+ function-enumerator = <2>;
+ gpios = <&pio 26 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-9 {
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_STATUS;
+ function-enumerator = <3>;
+ gpios = <&pio 25 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-10 {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_STATUS;
+ function-enumerator = <3>;
+ gpios = <&pio 24 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-11 {
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_STATUS;
+ function-enumerator = <3>;
+ gpios = <&pio 23 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-12 {
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_STATUS;
+ function-enumerator = <4>;
+ gpios = <&pio 28 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-13 {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_STATUS;
+ function-enumerator = <4>;
+ gpios = <&pio 27 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-14 {
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_STATUS;
+ function-enumerator = <4>;
+ gpios = <&pio 32 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-15 {
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_STATUS;
+ function-enumerator = <5>;
+ gpios = <&pio 45 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-16 {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_STATUS;
+ function-enumerator = <5>;
+ gpios = <&pio 44 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-17 {
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_STATUS;
+ function-enumerator = <5>;
+ gpios = <&pio 43 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&ssusb {
+ vusb33-supply = <®_3p3v>;
+ vbus-supply = <®_5v>;
+ status = "okay";
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+ð {
+ gmac1: mac at 1 {
+ compatible = "mediatek,eth-mac";
+ reg = <1>;
+ phy-mode = "2500base-x";
+ phy-handle = <&phy6>;
+ };
+};
+
+&mdio {
+ phy6: phy at 6 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <6>;
+ reset-gpios = <&pio 6 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <10000>;
+ reset-deassert-us = <10000>;
+ /* LED0: nc ; LED1: nc ; LED2: amber ; LED3: green */
+ mxl,led-config = <0x0 0x0 0x370 0x380>;
+ };
+};
+
+&swport0 {
+ label = "game";
+};
diff --git a/target/linux/mediatek/dts/mt7986a-acer-vero-w6m.dts b/target/linux/mediatek/dts/mt7986a-acer-vero-w6m.dts
new file mode 100644
index 0000000000..7927efcb00
--- /dev/null
+++ b/target/linux/mediatek/dts/mt7986a-acer-vero-w6m.dts
@@ -0,0 +1,66 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+/dts-v1/;
+#include "mt7986a-acer-w6-common.dtsi"
+
+/ {
+ model = "Acer Connect Vero W6m";
+ compatible = "acer,vero-w6m", "mediatek,mt7986a";
+
+ aliases {
+ serial0 = &uart0;
+ led-boot = &led_status;
+ led-failsafe = &led_status;
+ led-running = &led_status;
+ led-upgrade = &led_status;
+ };
+};
+
+&i2c0 {
+ led-controller at 30 {
+ compatible = "kinetic,ktd2026";
+ reg = <0x30>;
+ vin-supply = <®_5v>;
+ vio-supply = <®_3p3v>;
+
+ led_status: multi-led {
+ color = <LED_COLOR_ID_RGB>;
+ function = LED_FUNCTION_STATUS;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led at 0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_RED>;
+ };
+
+ led at 1 {
+ reg = <1>;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+
+ led at 2 {
+ reg = <2>;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+ };
+ };
+};
+
+&nvmem {
+ eeprom_factory_a0000: eeprom at a0000 {
+ reg = <0xa0000 0x1000>;
+ };
+};
+
+&slot0 {
+ radio0: mt7915 at 0,0 {
+ reg = <0x0000 0 0 0 0>;
+ nvmem-cells = <&eeprom_factory_a0000>;
+ nvmem-cell-names = "eeprom";
+ };
+};
+
+&swport0 {
+ label = "internet";
+};
diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network
index 2bcead8304..7bfc61a269 100644
--- a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network
+++ b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network
@@ -18,9 +18,13 @@ mediatek_setup_interfaces()
acelink,ew-7886cax)
ucidef_set_interface_lan "eth0" "dhcp"
;;
- acer,predator-w6)
+ acer,predator-w6|\
+ acer,predator-w6d)
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 game" eth1
;;
+ acer,vero-w6m)
+ ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" internet
+ ;;
arcadyan,mozart)
ucidef_set_interfaces_lan_wan "lan0 eth1" eth2
;;
@@ -132,7 +136,9 @@ mediatek_setup_macs()
local label_mac=""
case $board in
- acer,predator-w6)
+ acer,predator-w6|\
+ acer,predator-w6d|\
+ acer,vero-w6m)
wan_mac=$(mmc_get_mac_ascii u-boot-env WANMAC)
lan_mac=$(mmc_get_mac_ascii u-boot-env LANMAC)
;;
diff --git a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac
index f7f00c9a83..f87cc0646e 100644
--- a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac
+++ b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac
@@ -17,11 +17,16 @@ case "$board" in
[ "$PHYNBR" = "0" ] && macaddr_add $addr 1 > /sys${DEVPATH}/macaddress
[ "$PHYNBR" = "1" ] && macaddr_setbit_la $addr > /sys${DEVPATH}/macaddress
;;
- acer,predator-w6)
+ acer,predator-w6|\
+ acer,vero-w6m)
[ "$PHYNBR" = "0" ] && mmc_get_mac_ascii u-boot-env 2gMAC > /sys${DEVPATH}/macaddress
[ "$PHYNBR" = "1" ] && mmc_get_mac_ascii u-boot-env 6gMAC > /sys${DEVPATH}/macaddress
[ "$PHYNBR" = "2" ] && mmc_get_mac_ascii u-boot-env 5gMAC > /sys${DEVPATH}/macaddress
;;
+ acer,predator-w6d)
+ [ "$PHYNBR" = "0" ] && mmc_get_mac_ascii u-boot-env 2gMAC > /sys${DEVPATH}/macaddress
+ [ "$PHYNBR" = "1" ] && mmc_get_mac_ascii u-boot-env 5gMAC > /sys${DEVPATH}/macaddress
+ ;;
asus,rt-ax59u)
CI_UBIPART="UBI_DEV"
addr=$(mtd_get_mac_binary_ubi "Factory" 0x4)
diff --git a/target/linux/mediatek/filogic/base-files/lib/preinit/10_fix_eth_mac.sh b/target/linux/mediatek/filogic/base-files/lib/preinit/10_fix_eth_mac.sh
index 0d7da89cea..9d279898ac 100644
--- a/target/linux/mediatek/filogic/base-files/lib/preinit/10_fix_eth_mac.sh
+++ b/target/linux/mediatek/filogic/base-files/lib/preinit/10_fix_eth_mac.sh
@@ -2,7 +2,8 @@
preinit_set_mac_address() {
case $(board_name) in
- acer,predator-w6)
+ acer,predator-w6|\
+ acer,predator-w6d)
$(mmc_get_mac_ascii u-boot-env WANMAC)
$(mmc_get_mac_ascii u-boot-env LANMAC)
ip link set dev lan1 address "$lan_mac"
@@ -11,6 +12,14 @@ preinit_set_mac_address() {
ip link set dev game address "$lan_mac"
ip link set dev eth1 address "$wan_mac"
;;
+ acer,vero-w6m)
+ wan_mac=$(mmc_get_mac_ascii u-boot-env WANMAC)
+ lan_mac=$(mmc_get_mac_ascii u-boot-env LANMAC)
+ ip link set dev lan1 address "$lan_mac"
+ ip link set dev lan2 address "$lan_mac"
+ ip link set dev lan3 address "$lan_mac"
+ ip link set dev internet address "$wan_mac"
+ ;;
asus,tuf-ax4200|\
asus,tuf-ax6000)
CI_UBIPART="UBI_DEV"
diff --git a/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh b/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh
index cfd77b62d7..ce334b2c8e 100755
--- a/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh
+++ b/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh
@@ -91,7 +91,13 @@ platform_do_upgrade() {
fit_do_upgrade "$1"
;;
acer,predator-w6|\
+ acer,predator-w6d|\
+ acer,vero-w6m|\
arcadyan,mozart|\
+ glinet,gl-mt2500|\
+ glinet,gl-mt6000|\
+ glinet,gl-x3000|\
+ glinet,gl-xe3000|\
smartrg,sdg-8612|\
smartrg,sdg-8614|\
smartrg,sdg-8622|\
@@ -115,14 +121,6 @@ platform_do_upgrade() {
yuncore,ax835)
default_do_upgrade "$1"
;;
- glinet,gl-mt2500|\
- glinet,gl-mt6000|\
- glinet,gl-x3000|\
- glinet,gl-xe3000)
- CI_KERNPART="kernel"
- CI_ROOTPART="rootfs"
- emmc_do_upgrade "$1"
- ;;
mercusys,mr90x-v1|\
tplink,re6000xd)
CI_UBIPART="ubi0"
@@ -204,6 +202,8 @@ platform_copy_config() {
fi
;;
acer,predator-w6|\
+ acer,predator-w6d|\
+ acer,vero-w6m|\
arcadyan,mozart|\
glinet,gl-mt2500|\
glinet,gl-mt6000|\
diff --git a/target/linux/mediatek/image/filogic.mk b/target/linux/mediatek/image/filogic.mk
index 838a433bf4..072cae0d1f 100644
--- a/target/linux/mediatek/image/filogic.mk
+++ b/target/linux/mediatek/image/filogic.mk
@@ -165,6 +165,36 @@ define Device/acer_predator-w6
endef
TARGET_DEVICES += acer_predator-w6
+define Device/acer_predator-w6d
+ DEVICE_VENDOR := Acer
+ DEVICE_MODEL := Predator Connect W6d
+ DEVICE_DTS := mt7986a-acer-predator-w6d
+ DEVICE_DTS_DIR := ../dts
+ DEVICE_DTS_LOADADDR := 0x47000000
+ DEVICE_PACKAGES := kmod-usb3 kmod-mt7915e kmod-mt7916-firmware kmod-mt7986-firmware mt7986-wo-firmware e2fsprogs f2fsck mkf2fs
+ IMAGES := sysupgrade.bin
+ KERNEL := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
+ KERNEL_INITRAMFS := kernel-bin | lzma | \
+ fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+endef
+TARGET_DEVICES += acer_predator-w6d
+
+define Device/acer_vero-w6m
+ DEVICE_VENDOR := Acer
+ DEVICE_MODEL := Connect Vero W6m
+ DEVICE_DTS := mt7986a-acer-vero-w6m
+ DEVICE_DTS_DIR := ../dts
+ DEVICE_DTS_LOADADDR := 0x47000000
+ DEVICE_PACKAGES := kmod-leds-ktd202x kmod-mt7915e kmod-mt7916-firmware kmod-mt7986-firmware mt7986-wo-firmware e2fsprogs f2fsck mkf2fs
+ IMAGES := sysupgrade.bin
+ KERNEL := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
+ KERNEL_INITRAMFS := kernel-bin | lzma | \
+ fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+endef
+TARGET_DEVICES += acer_vero-w6m
+
define Device/adtran_smartrg
DEVICE_VENDOR := Adtran
DEVICE_DTS_DIR := ../dts
More information about the lede-commits
mailing list