[openwrt/openwrt] mediatek: filogic: add Netcore N60 support
LEDE Commits
lede-commits at lists.infradead.org
Fri Mar 29 14:59:21 PDT 2024
hauke pushed a commit to openwrt/openwrt.git, branch main:
https://git.openwrt.org/4ae474afbd023a3386f4276ca8f948a44b49ff1b
commit 4ae474afbd023a3386f4276ca8f948a44b49ff1b
Author: Chukun Pan <amadeus at jmu.edu.cn>
AuthorDate: Fri Nov 3 23:02:35 2023 +0800
mediatek: filogic: add Netcore N60 support
Hardware specification:
SoC: MediaTek MT7986A 4x A53
Flash: ESMT F50L1G41LB 128MB
RAM: W632GU6NB DDR3 256MB
Ethernet: 1x 2.5G + 4x 1G
WiFi1: MT7975N 2.4GHz 4T4R
WiFi2: MT7975PN 5GHz 4T4R
Button: Reset, WPS
Power: DC 12V 2A
Flash instructions:
1. Connect to the router using ssh or telnet,
username: useradmin, password is the web
login password of the router.
2. Use scp to upload bl31-uboot.fip and flash:
"mtd write xxx-preloader.bin spi0.0"
"mtd write xxx-bl31-uboot.fip FIP"
"mtd erase ubi"
3. Connect to the router via the Lan port,
set a static ip of your PC.
(ip 192.168.1.254, gateway 192.168.1.1)
4. Download initramfs image, reboot router,
waiting for tftp recovery to complete.
5. After openwrt boots up, perform sysupgrade.
Note:
1. Back up all mtd partitions before flashing.
Signed-off-by: Chukun Pan <amadeus at jmu.edu.cn>
---
target/linux/mediatek/dts/mt7986a-netcore-n60.dts | 284 +++++++++++++++++++++
.../filogic/base-files/etc/board.d/02_network | 1 +
.../etc/hotplug.d/ieee80211/11_fix_wifi_mac | 3 +-
.../filogic/base-files/lib/upgrade/platform.sh | 1 +
target/linux/mediatek/image/filogic.mk | 24 ++
5 files changed, 312 insertions(+), 1 deletion(-)
diff --git a/target/linux/mediatek/dts/mt7986a-netcore-n60.dts b/target/linux/mediatek/dts/mt7986a-netcore-n60.dts
new file mode 100644
index 0000000000..b96b1e2ec0
--- /dev/null
+++ b/target/linux/mediatek/dts/mt7986a-netcore-n60.dts
@@ -0,0 +1,284 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+#include "mt7986a.dtsi"
+
+/ {
+ model = "Netcore N60";
+ compatible = "netcore,n60", "mediatek,mt7986a";
+
+ aliases {
+ serial0 = &uart0;
+ label-mac-device = &gmac0;
+ led-boot = &led_status_red;
+ led-failsafe = &led_status_red;
+ led-running = &led_status_blue;
+ led-upgrade = &led_status_blue;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory {
+ reg = <0 0x40000000 0 0x10000000>;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&pio 9 GPIO_ACTIVE_LOW>;
+ };
+
+ mesh {
+ label = "mesh";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&pio 10 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_status_red: status-red {
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_STATUS;
+ gpios = <&pio 29 GPIO_ACTIVE_LOW>;
+ };
+
+ led_status_blue: status-blue {
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_STATUS;
+ gpios = <&pio 32 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&crypto {
+ status = "okay";
+};
+
+ð {
+ status = "okay";
+
+ gmac0: mac at 0 {
+ compatible = "mediatek,eth-mac";
+ reg = <0>;
+ phy-mode = "2500base-x";
+
+ nvmem-cells = <&macaddr_lan>;
+ nvmem-cell-names = "mac-address";
+
+ fixed-link {
+ speed = <2500>;
+ full-duplex;
+ pause;
+ };
+ };
+
+ gmac1: mac at 1 {
+ compatible = "mediatek,eth-mac";
+ reg = <1>;
+ phy-handle = <&phy6>;
+ phy-mode = "2500base-x";
+
+ nvmem-cells = <&macaddr_wan>;
+ nvmem-cell-names = "mac-address";
+ };
+
+ mdio: mdio-bus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+};
+
+&mdio {
+ reset-delay-us = <600>;
+ reset-post-delay-us = <20000>;
+ reset-gpios = <&pio 6 GPIO_ACTIVE_LOW>;
+
+ phy6: phy at 6 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <6>;
+ mxl,led-config = <0x0 0x0 0x0 0x3f0>;
+ };
+
+ switch: switch at 1f {
+ compatible = "mediatek,mt7531";
+ reg = <31>;
+ reset-gpios = <&pio 5 GPIO_ACTIVE_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&pio>;
+ interrupts = <66 IRQ_TYPE_LEVEL_HIGH>;
+ };
+};
+
+&switch {
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
+ reg = <0>;
+ label = "lan1";
+ };
+
+ port at 1 {
+ reg = <1>;
+ label = "lan2";
+ };
+
+ port at 3 {
+ reg = <3>;
+ label = "lan3";
+ };
+
+ port at 4 {
+ reg = <4>;
+ label = "lan4";
+ };
+
+ port at 6 {
+ reg = <6>;
+ ethernet = <&gmac0>;
+ phy-mode = "2500base-x";
+
+ fixed-link {
+ speed = <2500>;
+ full-duplex;
+ pause;
+ };
+ };
+ };
+};
+
+&spi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi_flash_pins>;
+ status = "okay";
+
+ flash at 0 {
+ compatible = "spi-nand";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0>;
+
+ spi-max-frequency = <20000000>;
+ spi-tx-bus-width = <4>;
+ spi-rx-bus-width = <4>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition at 0 {
+ label = "BL2";
+ reg = <0x0000000 0x0100000>;
+ read-only;
+ };
+
+ partition at 100000 {
+ label = "u-boot-env";
+ reg = <0x0100000 0x0080000>;
+ };
+
+ factory: partition at 180000 {
+ label = "Factory";
+ reg = <0x0180000 0x0200000>;
+ read-only;
+ };
+
+ partition at 380000 {
+ label = "FIP";
+ reg = <0x0380000 0x0200000>;
+ read-only;
+ };
+
+ partition at 580000 {
+ label = "ubi";
+ reg = <0x0580000 0x7280000>;
+ };
+ };
+ };
+};
+
+&pio {
+ spi_flash_pins: spi-flash-pins-33-to-38 {
+ mux {
+ function = "spi";
+ groups = "spi0", "spi0_wp_hold";
+ };
+ conf-pu {
+ pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP";
+ drive-strength = <8>;
+ mediatek,pull-up-adv = <0>; /* bias-disable */
+ };
+ conf-pd {
+ pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO";
+ drive-strength = <8>;
+ mediatek,pull-down-adv = <0>; /* bias-disable */
+ };
+ };
+
+ wf_2g_5g_pins: wf_2g_5g-pins {
+ mux {
+ function = "wifi";
+ groups = "wf_2g", "wf_5g";
+ };
+ conf {
+ pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
+ "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
+ "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
+ "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
+ "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
+ "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
+ "WF1_TOP_CLK", "WF1_TOP_DATA";
+ drive-strength = <4>;
+ };
+ };
+};
+
+&trng {
+ status = "okay";
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&watchdog {
+ status = "okay";
+};
+
+&wifi {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wf_2g_5g_pins>;
+
+ mediatek,mtd-eeprom = <&factory 0x0>;
+};
+
+&factory {
+ nvmem-layout {
+ compatible = "fixed-layout";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_lan: macaddr at 1fef20 {
+ reg = <0x1fef20 0x6>;
+ };
+
+ macaddr_wan: macaddr at 1fef26 {
+ reg = <0x1fef26 0x6>;
+ };
+ };
+};
diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network
index 5b8b910f62..a1207fc8eb 100644
--- a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network
+++ b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network
@@ -26,6 +26,7 @@ mediatek_setup_interfaces()
asus,tuf-ax4200|\
jdcloud,re-cp-03|\
mediatek,mt7981-rfb|\
+ netcore,n60|\
unielec,u7981-01*|\
zbtlink,zbt-z8102ax)
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" eth1
diff --git a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac
index facd2079c4..ef10417e44 100644
--- a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac
+++ b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac
@@ -86,7 +86,8 @@ case "$board" in
[ "$PHYNBR" = "0" ] && macaddr_add $addr 2 > /sys${DEVPATH}/macaddress
[ "$PHYNBR" = "1" ] && macaddr_add $addr 3 > /sys${DEVPATH}/macaddress
;;
- jcg,q30-pro)
+ jcg,q30-pro|\
+ netcore,n60)
# Originally, phy1 is phy0 mac with LA bit set. However, this would conflict
# addresses on multiple VIFs with the other radio. Use label mac to set LA bit.
[ "$PHYNBR" = "1" ] && macaddr_setbit_la $(get_mac_label) > /sys${DEVPATH}/macaddress
diff --git a/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh b/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh
index 389c177fb9..380606412d 100755
--- a/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh
+++ b/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh
@@ -130,6 +130,7 @@ platform_do_upgrade() {
h3c,magic-nx30-pro|\
jcg,q30-pro|\
mediatek,mt7981-rfb|\
+ netcore,n60|\
qihoo,360t7|\
tplink,tl-xdr4288|\
tplink,tl-xdr6086|\
diff --git a/target/linux/mediatek/image/filogic.mk b/target/linux/mediatek/image/filogic.mk
index e3b588c861..2717121361 100644
--- a/target/linux/mediatek/image/filogic.mk
+++ b/target/linux/mediatek/image/filogic.mk
@@ -806,6 +806,30 @@ define Device/mercusys_mr90x-v1
endef
TARGET_DEVICES += mercusys_mr90x-v1
+define Device/netcore_n60
+ DEVICE_VENDOR := Netcore
+ DEVICE_MODEL := N60
+ DEVICE_DTS := mt7986a-netcore-n60
+ DEVICE_DTS_DIR := ../dts
+ UBINIZE_OPTS := -E 5
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ KERNEL_IN_UBI := 1
+ UBOOTENV_IN_UBI := 1
+ IMAGES := sysupgrade.itb
+ KERNEL_INITRAMFS_SUFFIX := -recovery.itb
+ KERNEL := kernel-bin | gzip
+ KERNEL_INITRAMFS := kernel-bin | lzma | \
+ fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
+ IMAGE/sysupgrade.itb := append-kernel | \
+ fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata
+ DEVICE_PACKAGES := kmod-mt7986-firmware mt7986-wo-firmware
+ ARTIFACTS := preloader.bin bl31-uboot.fip
+ ARTIFACT/preloader.bin := mt7986-bl2 spim-nand-ddr3
+ ARTIFACT/bl31-uboot.fip := mt7986-bl31-uboot netcore_n60
+endef
+TARGET_DEVICES += netcore_n60
+
define Device/netgear_wax220
DEVICE_VENDOR := NETGEAR
DEVICE_MODEL := WAX220
More information about the lede-commits
mailing list