[openwrt/openwrt] kirkwood: add support for Netgear Stora (MS2000/2110) NAS
LEDE Commits
lede-commits at lists.infradead.org
Sat Mar 16 16:19:30 PDT 2024
wigyori pushed a commit to openwrt/openwrt.git, branch main:
https://git.openwrt.org/0dfc0495fc4194eff2379293c90863ac0161fdb1
commit 0dfc0495fc4194eff2379293c90863ac0161fdb1
Author: Zoltan HERPAI <wigyori at uid0.hu>
AuthorDate: Thu May 5 08:47:27 2022 +0200
kirkwood: add support for Netgear Stora (MS2000/2110) NAS
Dual-slot NAS based on Marvell Kirkwood.
Specifications:
- Marvell 88F6281 @1GHz
- 128Mb RAM
- 256Mb NAND
- 1x GbE LAN (Marvell 88E1116)
- 1x USB 2.0
- 2x SATA
- PCF8563 RTC
- LM75 sensor
- TC654 PWM fan controller
- Serial on J2 (115200,8n1)
- Newer bootROM so kwboot-ing via serial is possible
Installation:
1. Serial console
- Connect your levelshifter to the serial console
on J2 (refer to the wiki page for pinout)
2. Update u-boot
- Download the u-boot.kwb image for the device
- Powercycle the NAS
- Run "kwboot -b ./u-boot.kwb /dev/ttyUSB0 -p"
- Connect to the serial console with minicom
- tftp 0x0800000 netgear_stora-u-boot.kwb
- nand erase 0x0 100000
- nand write 0x0800000 0x0 0x100000
- reset
3. Install OpenWrt
- Boot up the initramfs image
- tftpboot 0x800000 openwrt-kirkwood-netgear_stora-initramfs-uImage; bootm 0x800000
- Download the sysupgrade image and perform sysupgrade
The fan is controlled in 3 stages by a script running every minute
from cron, measuring the CPU temperature.
Snippets taken from bodhi <mibodhi at gmail.com>
Signed-off-by: Zoltan HERPAI <wigyori at uid0.hu>
---
package/boot/uboot-kirkwood/Makefile | 6 +
.../uboot-kirkwood/patches/180-netgear-stora.patch | 648 +++++++++++++++++++++
.../kirkwood/base-files/etc/board.d/02_network | 1 +
.../base-files/etc/uci-defaults/04_storafan | 22 +
target/linux/kirkwood/base-files/sbin/fan_ctrl.sh | 23 +
.../files/arch/arm/boot/dts/kirkwood-stora.dts | 227 ++++++++
target/linux/kirkwood/image/Makefile | 10 +
.../kirkwood/patches-5.15/117-netgear_stora.patch | 10 +
.../kirkwood/patches-6.1/117-netgear_stora.patch | 10 +
9 files changed, 957 insertions(+)
diff --git a/package/boot/uboot-kirkwood/Makefile b/package/boot/uboot-kirkwood/Makefile
index 7f9ae4e151..92a814ac4f 100644
--- a/package/boot/uboot-kirkwood/Makefile
+++ b/package/boot/uboot-kirkwood/Makefile
@@ -65,6 +65,11 @@ define U-Boot/nas220
BUILD_DEVICES:=seagate_blackarmor-nas220
endef
+define U-Boot/netgear_ms2110
+ NAME:=Netgear Stora (MS2000/2110)
+ BUILD_DEVICES:=netgear_stora
+endef
+
define U-Boot/nsa310
NAME:=Zyxel NSA310
BUILD_DEVICES:=zyxel_nsa310b
@@ -107,6 +112,7 @@ UBOOT_TARGETS := \
iconnect iconnect_second_stage \
l-50 \
nas220 \
+ netgear_ms2110 \
nsa310 \
nsa310s \
nsa325 \
diff --git a/package/boot/uboot-kirkwood/patches/180-netgear-stora.patch b/package/boot/uboot-kirkwood/patches/180-netgear-stora.patch
new file mode 100644
index 0000000000..5eed89d5e6
--- /dev/null
+++ b/package/boot/uboot-kirkwood/patches/180-netgear-stora.patch
@@ -0,0 +1,648 @@
+diff -ruN u-boot-2020.04.old/arch/arm/mach-kirkwood/Kconfig u-boot-2020.04/arch/arm/mach-kirkwood/Kconfig
+--- u-boot-2020.04.old/arch/arm/mach-kirkwood/Kconfig 2020-07-09 00:46:15.000000000 +0200
++++ u-boot-2020.04/arch/arm/mach-kirkwood/Kconfig 2020-07-09 01:07:00.309219477 +0200
+@@ -44,6 +44,9 @@
+ config TARGET_NETSPACE_V2
+ bool "LaCie netspace_v2 Board"
+
++config TARGET_NETGEAR_MS2110
++ bool "Netgear MS2110 Board"
++
+ config TARGET_IB62X0
+ bool "ib62x0 Board"
+
+@@ -92,6 +95,7 @@
+ source "board/keymile/Kconfig"
+ source "board/LaCie/net2big_v2/Kconfig"
+ source "board/LaCie/netspace_v2/Kconfig"
++source "board/Marvell/netgear_ms2110/Kconfig"
+ source "board/raidsonic/ib62x0/Kconfig"
+ source "board/Seagate/dockstar/Kconfig"
+ source "board/Seagate/goflexhome/Kconfig"
+diff -ruN u-boot-2020.04.old/board/Marvell/netgear_ms2110/Kconfig u-boot-2020.04/board/Marvell/netgear_ms2110/Kconfig
+--- u-boot-2020.04.old/board/Marvell/netgear_ms2110/Kconfig 1970-01-01 01:00:00.000000000 +0100
++++ u-boot-2020.04/board/Marvell/netgear_ms2110/Kconfig 2020-07-09 00:59:29.000000000 +0200
+@@ -0,0 +1,12 @@
++if TARGET_NETGEAR_MS2110
++
++config SYS_BOARD
++ default "netgear_ms2110"
++
++config SYS_VENDOR
++ default "Marvell"
++
++config SYS_CONFIG_NAME
++ default "netgear_ms2110"
++
++endif
+diff -ruN u-boot-2020.04.old/board/Marvell/netgear_ms2110/kwbimage.cfg u-boot-2020.04/board/Marvell/netgear_ms2110/kwbimage.cfg
+--- u-boot-2020.04.old/board/Marvell/netgear_ms2110/kwbimage.cfg 1970-01-01 01:00:00.000000000 +0100
++++ u-boot-2020.04/board/Marvell/netgear_ms2110/kwbimage.cfg 2020-07-09 00:59:29.000000000 +0200
+@@ -0,0 +1,167 @@
++#
++# (C) Copyright 2009
++# Marvell Semiconductor <www.marvell.com>
++# Written-by: Prafulla Wadaskar <prafulla at marvell.com>
++#
++# See file CREDITS for list of people who contributed to this
++# project.
++#
++# This program is free software; you can redistribute it and/or
++# modify it under the terms of the GNU General Public License as
++# published by the Free Software Foundation; either version 2 of
++# the License, or (at your option) any later version.
++#
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++# GNU General Public License for more details.
++#
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
++# MA 02110-1301 USA
++#
++# Refer docs/README.kwimage for more details about how-to configure
++# and create kirkwood boot image
++#
++
++# Boot Media configurations
++BOOT_FROM nand
++NAND_ECC_MODE default
++NAND_PAGE_SIZE 0x0800
++
++# SOC registers configuration using bootrom header extension
++# Maximum KWBIMAGE_MAX_CONFIG configurations allowed
++
++# Configure RGMII-0 interface pad voltage to 1.8V
++DATA 0xFFD100e0 0x1b1b1b9b
++
++#Dram initalization for SINGLE x16 CL=5 @ 400MHz
++DATA 0xFFD01400 0x43000c30 # DDR Configuration register
++# bit13-0: 0xc30 (3120 DDR2 clks refresh rate)
++# bit23-14: zero
++# bit24: 1= enable exit self refresh mode on DDR access
++# bit25: 1 required
++# bit29-26: zero
++# bit31-30: 01
++
++DATA 0xFFD01404 0x37543000 # DDR Controller Control Low
++# bit 4: 0=addr/cmd in smame cycle
++# bit 5: 0=clk is driven during self refresh, we don't care for APX
++# bit 6: 0=use recommended falling edge of clk for addr/cmd
++# bit14: 0=input buffer always powered up
++# bit18: 1=cpu lock transaction enabled
++# bit23-20: 5=recommended value for CL=5 and STARTBURST_DEL disabled bit31=0
++# bit27-24: 7= CL+2, STARTBURST sample stages, for freqs 400MHz, unbuffered DIMM
++# bit30-28: 3 required
++# bit31: 0=no additional STARTBURST delay
++
++DATA 0xFFD01408 0x22125451 # DDR Timing (Low) (active cycles value +1)
++# bit3-0: TRAS lsbs
++# bit7-4: TRCD
++# bit11- 8: TRP
++# bit15-12: TWR
++# bit19-16: TWTR
++# bit20: TRAS msb
++# bit23-21: 0x0
++# bit27-24: TRRD
++# bit31-28: TRTP
++
++DATA 0xFFD0140C 0x00000833 # DDR Timing (High)
++# bit6-0: TRFC
++# bit8-7: TR2R
++# bit10-9: TR2W
++# bit12-11: TW2W
++# bit31-13: zero required
++
++DATA 0xFFD01410 0x00000099 # DDR Address Control
++# bit1-0: 00, Cs0width=x8
++# bit3-2: 11, Cs0size=1Gb
++# bit5-4: 00, Cs1width=x8
++# bit7-6: 11, Cs1size=1Gb
++# bit9-8: 00, Cs2width=nonexistent
++# bit11-10: 00, Cs2size =nonexistent
++# bit13-12: 00, Cs3width=nonexistent
++# bit15-14: 00, Cs3size =nonexistent
++# bit16: 0, Cs0AddrSel
++# bit17: 0, Cs1AddrSel
++# bit18: 0, Cs2AddrSel
++# bit19: 0, Cs3AddrSel
++# bit31-20: 0 required
++
++DATA 0xFFD01414 0x00000000 # DDR Open Pages Control
++# bit0: 0, OpenPage enabled
++# bit31-1: 0 required
++
++DATA 0xFFD01418 0x00000000 # DDR Operation
++# bit3-0: 0x0, DDR cmd
++# bit31-4: 0 required
++
++DATA 0xFFD0141C 0x00000C52 # DDR Mode
++# bit2-0: 2, BurstLen=2 required
++# bit3: 0, BurstType=0 required
++# bit6-4: 4, CL=5
++# bit7: 0, TestMode=0 normal
++# bit8: 0, DLL reset=0 normal
++# bit11-9: 6, auto-precharge write recovery ????????????
++# bit12: 0, PD must be zero
++# bit31-13: 0 required
++
++DATA 0xFFD01420 0x00000004 # DDR Extended Mode
++# bit0: 0, DDR DLL enabled
++# bit1: 0, DDR drive strenght normal
++# bit2: 1, DDR ODT control lsd (disabled)
++# bit5-3: 000, required
++# bit6: 0, DDR ODT control msb, (disabled)
++# bit9-7: 000, required
++# bit10: 0, differential DQS enabled
++# bit11: 0, required
++# bit12: 0, DDR output buffer enabled
++# bit31-13: 0 required
++
++DATA 0xFFD01424 0x0000F17F # DDR Controller Control High
++# bit2-0: 111, required
++# bit3 : 1 , MBUS Burst Chop disabled
++# bit6-4: 111, required
++# bit7 : 0
++# bit8 : 1 , add writepath sample stage, must be 1 for DDR freq >= 300MHz
++# bit9 : 0 , no half clock cycle addition to dataout
++# bit10 : 0 , 1/4 clock cycle skew enabled for addr/ctl signals
++# bit11 : 0 , 1/4 clock cycle skew disabled for write mesh
++# bit15-12: 1111 required
++# bit31-16: 0 required
++
++DATA 0xFFD01428 0x00085520 # DDR2 ODT Read Timing (default values)
++DATA 0xFFD0147C 0x00008552 # DDR2 ODT Write Timing (default values)
++
++DATA 0xFFD01500 0x00000000 # CS[0]n Base address to 0x0
++DATA 0xFFD01504 0x03FFFFF1 # CS[0]n Size
++# bit0: 1, Window enabled
++# bit1: 0, Write Protect disabled
++# bit3-2: 00, CS0 hit selected
++# bit23-4: ones, required
++# bit31-24: 0x0F, Size (i.e. 256MB)
++
++DATA 0xFFD01508 0x04000000 # CS[1]n Base address to 256Mb
++DATA 0xFFD0150C 0x03FFFFF5 # CS[1]n Size 256Mb Window enabled for CS1
++
++DATA 0xFFD01514 0x00000000 # CS[2]n Size, window disabled
++DATA 0xFFD0151C 0x00000000 # CS[3]n Size, window disabled
++
++DATA 0xFFD01494 0x00120012 # DDR ODT Control (Low)
++# bit3-0: 2, ODT0Rd, MODT[0] asserted during read from DRAM CS1
++# bit7-4: 1, ODT0Rd, MODT[0] asserted during read from DRAM CS0
++# bit19-16:2, ODT0Wr, MODT[0] asserted during write to DRAM CS1
++# bit23-20:1, ODT0Wr, MODT[0] asserted during write to DRAM CS0
++
++DATA 0xFFD01498 0x00000000 # DDR ODT Control (High)
++# bit1-0: 00, ODT0 controlled by ODT Control (low) register above
++# bit3-2: 01, ODT1 active NEVER!
++# bit31-4: zero, required
++
++DATA 0xFFD0149C 0x0000E40F # CPU ODT Control
++DATA 0xFFD01480 0x00000001 # DDR Initialization Control
++#bit0=1, enable DDR init upon this register write
++
++# End of Header extension
++DATA 0x0 0x0
+diff -ruN u-boot-2020.04.old/board/Marvell/netgear_ms2110/MAINTAINERS u-boot-2020.04/board/Marvell/netgear_ms2110/MAINTAINERS
+--- u-boot-2020.04.old/board/Marvell/netgear_ms2110/MAINTAINERS 1970-01-01 01:00:00.000000000 +0100
++++ u-boot-2020.04/board/Marvell/netgear_ms2110/MAINTAINERS 2020-07-09 00:59:29.000000000 +0200
+@@ -0,0 +1,6 @@
++NETGEAR_MS2110 BOARD
++M: bodhi <mibodhi at gmail.com>
++S: Maintained
++F: board/Marvell/netgear_ms2110
++F: include/configs/netgear_ms2110.h
++F: configs/netgear_ms2110_defconfig
+diff -ruN u-boot-2020.04.old/board/Marvell/netgear_ms2110/Makefile u-boot-2020.04/board/Marvell/netgear_ms2110/Makefile
+--- u-boot-2020.04.old/board/Marvell/netgear_ms2110/Makefile 1970-01-01 01:00:00.000000000 +0100
++++ u-boot-2020.04/board/Marvell/netgear_ms2110/Makefile 2020-07-09 00:59:29.000000000 +0200
+@@ -0,0 +1,13 @@
++#
++# (C) Copyright 2014 bodhi <mibodhi at gmail.com>
++#
++# Based on
++# (C) Copyright 2009
++# Marvell Semiconductor <www.marvell.com>
++# Written-by: Prafulla Wadaskar <prafulla at marvell.com>
++#
++# SPDX-License-Identifier: GPL-2.0+
++#
++
++obj-y := netgear_ms2110.o
++
+diff -ruN u-boot-2020.04.old/board/Marvell/netgear_ms2110/netgear_ms2110.c u-boot-2020.04/board/Marvell/netgear_ms2110/netgear_ms2110.c
+--- u-boot-2020.04.old/board/Marvell/netgear_ms2110/netgear_ms2110.c 1970-01-01 01:00:00.000000000 +0100
++++ u-boot-2020.04/board/Marvell/netgear_ms2110/netgear_ms2110.c 2020-07-09 00:59:29.000000000 +0200
+@@ -0,0 +1,151 @@
++/*
++ * Copyright (C) 2014-2017 bodhi <mibodhi at gmail.com>
++ *
++ * Based on Kirkwood support:
++ * (C) Copyright 2009
++ * Marvell Semiconductor <www.marvell.com>
++ * Written-by: Prafulla Wadaskar <prafulla at marvell.com>
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
++ * MA 02110-1301 USA
++ */
++
++#include <common.h>
++#include <miiphy.h>
++#include <netdev.h>
++#include <asm/arch/soc.h>
++#include <asm/arch/mpp.h>
++#include "netgear_ms2110.h"
++#include <asm/mach-types.h>
++
++DECLARE_GLOBAL_DATA_PTR;
++int board_early_init_f(void)
++{
++ /*
++ * default gpio configuration
++ * There are maximum 64 gpios controlled through 2 sets of registers
++ * the below configuration configures mainly initial LED status
++ */
++ mvebu_config_gpio(NETGEAR_MS2110_OE_VAL_LOW,
++ NETGEAR_MS2110_OE_VAL_HIGH,
++ NETGEAR_MS2110_OE_LOW, NETGEAR_MS2110_OE_HIGH);
++
++ /* Multi-Purpose Pins Functionality configuration */
++ u32 kwmpp_config[] = {
++ MPP0_NF_IO2,
++ MPP1_NF_IO3,
++ MPP2_NF_IO4,
++ MPP3_NF_IO5,
++ MPP4_NF_IO6,
++ MPP5_NF_IO7,
++ MPP6_SYSRST_OUTn,
++ MPP7_SPI_SCn,
++ MPP8_TW_SDA,
++ MPP9_TW_SCK,
++ MPP10_UART0_TXD,
++ MPP11_UART0_RXD,
++ MPP12_SD_CLK,
++ MPP13_SD_CMD,
++ MPP14_SD_D0,
++ MPP15_SD_D1,
++ MPP16_SD_D2,
++ MPP17_SD_D3,
++ MPP18_NF_IO0,
++ MPP19_NF_IO1,
++ MPP20_SATA1_ACTn,
++ MPP21_SATA0_ACTn,
++ MPP22_GPIO,
++ MPP23_GPIO,
++ MPP24_GE1_4,
++ MPP25_GE1_5,
++ MPP26_GE1_6,
++ MPP27_GE1_7,
++ MPP28_GPIO,
++ MPP29_GPIO,
++ MPP30_GPIO,
++ MPP31_GPIO,
++ MPP32_GPIO,
++ MPP33_GE1_13,
++ MPP34_SATA1_ACTn,
++ MPP35_GPIO,
++ MPP36_GPIO,
++ MPP37_GPIO,
++ MPP38_GPIO,
++ MPP39_GPIO,
++ MPP40_GPIO,
++ MPP41_GPIO,
++ MPP42_GPIO,
++ MPP43_GPIO,
++ MPP44_GPIO,
++ MPP45_TDM_PCLK,
++ MPP46_TDM_FS,
++ MPP47_TDM_DRX,
++ MPP48_TDM_DTX,
++ MPP49_GPIO,
++ 0
++ };
++ kirkwood_mpp_conf(kwmpp_config, NULL);
++ return 0;
++}
++
++int board_init(void)
++{ /*
++ * arch number of board
++ */
++ gd->bd->bi_arch_number = MACH_TYPE_NETGEAR_MS2110;
++
++ /* adress of boot parameters */
++ gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100;
++
++ return 0;
++}
++#ifdef CONFIG_RESET_PHY_R
++/* Configure and enable MV88E1116 PHY */
++void reset_phy(void)
++{
++ u16 reg;
++ u16 devadr;
++ char *name = "egiga0";
++
++ if (miiphy_set_current_dev(name))
++ return;
++
++ /* command to read PHY dev address */
++ if (miiphy_read(name, 0xEE, 0xEE, (u16 *) &devadr)) {
++ printf("Err..%s could not read PHY dev address\n",
++ __FUNCTION__);
++ return;
++ }
++
++ /*
++ * Enable RGMII delay on Tx and Rx for CPU port
++ * Ref: sec 4.7.2 of chip datasheet
++ */
++ miiphy_write(name, devadr, MV88E1116_PGADR_REG, 2);
++ miiphy_read(name, devadr, MV88E1116_MAC_CTRL_REG, ®);
++ reg |= (MV88E1116_RGMII_RXTM_CTRL | MV88E1116_RGMII_TXTM_CTRL);
++ miiphy_write(name, devadr, MV88E1116_MAC_CTRL_REG, reg);
++ miiphy_write(name, devadr, MV88E1116_PGADR_REG, 0);
++
++ /* reset the phy */
++ miiphy_reset(name, devadr);
++
++ printf("88E1116 Initialized on %s\n", name);
++}
++#endif /* CONFIG_RESET_PHY_R */
++
+diff -ruN u-boot-2020.04.old/board/Marvell/netgear_ms2110/netgear_ms2110.h u-boot-2020.04/board/Marvell/netgear_ms2110/netgear_ms2110.h
+--- u-boot-2020.04.old/board/Marvell/netgear_ms2110/netgear_ms2110.h 1970-01-01 01:00:00.000000000 +0100
++++ u-boot-2020.04/board/Marvell/netgear_ms2110/netgear_ms2110.h 2020-07-09 00:59:29.000000000 +0200
+@@ -0,0 +1,41 @@
++/*
++ * (C) Copyright 2009
++ * Marvell Semiconductor <www.marvell.com>
++ * Written-by: Prafulla Wadaskar <prafulla at marvell.com>
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
++ * MA 02110-1301 USA
++ */
++
++#ifndef __NETGEAR_MS2110_H
++#define __NETGEAR_MS2110_H
++
++#define NETGEAR_MS2110_OE_LOW (~(1 << 7))
++#define NETGEAR_MS2110_OE_HIGH (~(1 << 2 | 1 << 12))
++#define NETGEAR_MS2110_OE_VAL_LOW (0)
++#define NETGEAR_MS2110_OE_VAL_HIGH (1 << 12)
++
++/* PHY related */
++#define MV88E1116_LED_FCTRL_REG 10
++#define MV88E1116_CPRSP_CR3_REG 21
++#define MV88E1116_MAC_CTRL_REG 21
++#define MV88E1116_PGADR_REG 22
++#define MV88E1116_RGMII_TXTM_CTRL (1 << 4)
++#define MV88E1116_RGMII_RXTM_CTRL (1 << 5)
++
++#endif /* __NETGEAR_MS2110_H */
+diff -ruN a/configs/netgear_ms2110_defconfig b/configs/netgear_ms2110_defconfig
+--- a/configs/netgear_ms2110_defconfig 1970-01-01 01:00:00.000000000 +0100
++++ b/configs/netgear_ms2110_defconfig 2020-07-14 17:59:18.000000000 +0200
+@@ -0,0 +1,50 @@
++CONFIG_ARM=y
++CONFIG_KIRKWOOD=y
++CONFIG_SYS_DCACHE_OFF=y
++CONFIG_ARCH_CPU_INIT=y
++CONFIG_TARGET_NETGEAR_MS2110=y
++CONFIG_IDENT_STRING="\nNetgear Stora MS2110"
++CONFIG_SYS_PROMPT="Stora> "
++CONFIG_HUSH_PARSER=y
++CONFIG_SYS_TEXT_BASE=0x600000
++# CONFIG_DISPLAY_BOARDINFO is not set
++# CONFIG_CMD_IMLS is not set
++# CONFIG_CMD_FLASH is not set
++CONFIG_CMD_IDE=y
++CONFIG_MVGBE=y
++CONFIG_MII=y
++CONFIG_SYS_NS16550=y
++CONFIG_OF_LIBFDT=y
++CONFIG_CMD_FDT=y
++CONFIG_CMD_BOOTZ=y
++CONFIG_CMD_SETEXPR=y
++CONFIG_CMD_DATE=y
++CONFIG_CMD_DHCP=y
++CONFIG_CMD_MII=y
++CONFIG_CMD_PING=y
++CONFIG_CMD_EXT2=y
++CONFIG_CMD_EXT4=y
++CONFIG_CMD_FAT=y
++CONFIG_CMD_JFFS2=y
++CONFIG_CMD_USB=y
++CONFIG_ISO_PARTITION=y
++CONFIG_EFI_PARTITION=y
++# CONFIG_MMC is not set
++CONFIG_MTD=y
++CONFIG_MTD_RAW_NAND=y
++CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:0xe0000 at 0x0(uboot),0x20000 at 0xe0000(uboot_env),- at 0x100000(ubi)"
++CONFIG_CMD_MTDPARTS=y
++CONFIG_CMD_NAND=y
++CONFIG_ENV_IS_IN_NAND=y
++CONFIG_ENV_SIZE=0x20000
++CONFIG_ENV_ADDR=0xe0000
++CONFIG_ENV_OFFSET=0xe0000
++CONFIG_ENV_SECT_SIZE=0x20000
++CONFIG_CMD_UBI=y
++CONFIG_USB=y
++CONFIG_USB_EHCI_HCD=y
++CONFIG_USB_STORAGE=y
++CONFIG_BLK=y
++CONFIG_MVSATA_IDE=y
++CONFIG_DM_RTC=y
++CONFIG_RTC_MV=y
+diff -ruN a/include/configs/netgear_ms2110.h b/include/configs/netgear_ms2110.h
+--- a/include/configs/netgear_ms2110.h 1970-01-01 01:00:00.000000000 +0100
++++ b/include/configs/netgear_ms2110.h 2020-07-14 17:49:15.000000000 +0200
+@@ -0,0 +1,155 @@
++/*
++ * (C) Copyright 2014-2017 bodhi <mibodhi at gmail.com>
++ * (C) Copyright 2020 Zoltan HERPAI <wigyori at uid0.hu>
++ *
++ * Based on Kirkwood support:
++ * (C) Copyright 2009
++ * Marvell Semiconductor <www.marvell.com>
++ * Written-by: Prafulla Wadaskar <prafulla at marvell.com>
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
++ * MA 02110-1301 USA
++ */
++
++#ifndef _CONFIG_NGMS2110_H
++#define _CONFIG_NGMS2110_H
++
++/*
++ * High Level Configuration Options (easy to change)
++ */
++#define CONFIG_MARVELL 1
++#define CONFIG_ARM926EJS 1 /* Basic Architecture */
++#define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */
++#define CONFIG_KIRKWOOD 1 /* SOC Family Name */
++#define CONFIG_KW88F6281 1 /* SOC Name */
++#define CONFIG_MACH_NETGEAR_MS2110 /* Machine type */
++#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
++
++/*
++ * Commands configuration
++ */
++#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
++#define CONFIG_SYS_MVFS /* Picks up Filesystem from mv-common.h */
++#define CONFIG_CMD_ENV
++#define CONFIG_PREBOOT
++#define CONFIG_SYS_HUSH_PARSER
++#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
++
++/* #define CONFIG_CMD_AUTOSCRIPT */
++
++/*
++ * mv-common.h should be defined after CMD configs since it used them
++ * to enable certain macros
++ */
++#include "mv-common.h"
++
++/* Remove or override few declarations from mv-common.h */
++//#undef CONFIG_SYS_PROMPT /* previously defined in mv-common.h */
++//#define CONFIG_SYS_PROMPT "Netgear Stora> "
++
++/*
++ * NAND configuration
++ */
++#ifdef CONFIG_CMD_NAND
++#define CONFIG_NAND_KIRKWOOD
++#define CONFIG_SYS_MAX_NAND_DEVICE 1
++#define NAND_MAX_CHIPS 1
++#define CONFIG_SYS_NAND_BASE 0xD8000000 /* KW_DEFADR_NANDF */
++#define NAND_ALLOW_ERASE_ALL 1
++#endif
++
++/*
++ * Default environment variables
++*/
++#define CONFIG_BOOTCOMMAND \
++ "setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \
++ "ubi part ubi; " \
++ "ubifsmount ubi:rootfs; " \
++ "ubi read 0x800000 kernel; " \
++ "bootm 0x800000"
++
++#define CONFIG_EXTRA_ENV_SETTINGS \
++ "arcNumber=2743\0" \
++ "console=console=ttyS0,115200\0" \
++ "ethact=egiga0\0" \
++ "ethaddr=52:3b:20:9c:11:51\0" \
++ "ipaddr=192.168.0.231\0" \
++ "mtdids=nand0=orion_nand\0" \
++ "mtdparts="CONFIG_MTDPARTS_DEFAULT "\0" \
++ "serverip=192.168.0.220\0" \
++ "bootargs_root=\0"
++
++/* size in bytes reserved for initial data */
++#define CONFIG_SYS_GBL_DATA_SIZE 128
++
++/*
++ * Other required minimal configurations
++ */
++#define CONFIG_STACKSIZE 0x00100000 /* regular stack- 1M */
++
++/*
++ * Ethernet Driver configuration
++ */
++#ifdef CONFIG_CMD_NET
++#define CONFIG_NETCONSOLE /* include NetConsole support */
++#define CONFIG_NET_MULTI /* specify more that one ports available */
++#define CONFIG_KIRKWOOD_EGIGA_PORTS {1,0} /* enable first port */
++#define CONFIG_MV88E61XX_MULTICHIP_ADRMODE
++#define CONFIG_DIS_AUTO_NEG_SPEED_GMII /*Disable Auto speed negociation */
++#define CONFIG_PHY_SPEED _1000BASET /*Force PHYspeed to 1GBPs */
++#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
++#define CONFIG_PHY_BASE_ADR 0x0A
++#define CONFIG_RESET_PHY_R /* use reset_phy() to init PHY */
++#endif /* CONFIG_CMD_NET */
++
++/*
++ * USB/EHCI
++ */
++#ifdef CONFIG_CMD_USB
++#define CONFIG_USB_EHCI /* Enable EHCI USB support */
++#define CONFIG_USB_EHCI_KIRKWOOD /* on Kirkwood platform */
++#define CONFIG_EHCI_IS_TDI
++#define CONFIG_SUPPORT_VFAT
++#endif /* CONFIG_CMD_USB */
++
++/*
++ * File system
++ */
++#define CONFIG_JFFS2_NAND
++#define CONFIG_JFFS2_LZO
++#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
++
++/*
++ * SATA
++ */
++
++#ifdef CONFIG_MVSATA_IDE
++#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
++#define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET
++#endif
++
++/*
++ * Date Time
++ * */
++#ifdef CONFIG_CMD_DATE
++#define CONFIG_RTC_MV
++#define CONFIG_CMD_SNTP
++#define CONFIG_CMD_DNS
++#endif /* CONFIG_CMD_DATE */
++
++#endif /* _CONFIG_NGMS2110_H */
diff --git a/target/linux/kirkwood/base-files/etc/board.d/02_network b/target/linux/kirkwood/base-files/etc/board.d/02_network
index 15f75df6a8..3ed2fa94b0 100644
--- a/target/linux/kirkwood/base-files/etc/board.d/02_network
+++ b/target/linux/kirkwood/base-files/etc/board.d/02_network
@@ -24,6 +24,7 @@ kirkwood_setup_interfaces()
iom,ix2-200|\
iptime,nas1|\
netgear,readynas-duo-v2|\
+ netgear,stora|\
raidsonic,ib-nas62x0|\
seagate,blackarmor-nas220|\
seagate,dockstar|\
diff --git a/target/linux/kirkwood/base-files/etc/uci-defaults/04_storafan b/target/linux/kirkwood/base-files/etc/uci-defaults/04_storafan
new file mode 100644
index 0000000000..cdf44afa14
--- /dev/null
+++ b/target/linux/kirkwood/base-files/etc/uci-defaults/04_storafan
@@ -0,0 +1,22 @@
+#
+# Copyright (C) 2021 OpenWrt.org
+#
+
+. /lib/functions.sh
+
+board=$(board_name)
+
+case "$board" in
+netgear,stora)
+ # Set fan script execution in crontab
+ grep -s -q fan_ctrl.sh /etc/crontabs/root && exit 0
+
+ echo "# stora fan script runs every 5 minutes" >> /etc/crontabs/root
+ echo "*/5 * * * * /sbin/fan_ctrl.sh" >> /etc/crontabs/root
+
+ # Execute one time after initial flash (instead of waiting 5 min for cron)
+ /sbin/fan_ctrl.sh
+ ;;
+esac
+
+exit 0
diff --git a/target/linux/kirkwood/base-files/sbin/fan_ctrl.sh b/target/linux/kirkwood/base-files/sbin/fan_ctrl.sh
new file mode 100755
index 0000000000..bce8700736
--- /dev/null
+++ b/target/linux/kirkwood/base-files/sbin/fan_ctrl.sh
@@ -0,0 +1,23 @@
+#!/bin/sh
+
+CPU_TEMP=$(cut -c1-2 /sys/devices/platform/ocp at f1000000/f1011000.i2c/i2c-0/0-0048/hwmon/hwmon?/temp1_input)
+
+CPU_LOW=45
+CPU_MID=50
+CPU_HIGH=55
+
+if [ ! -e /sys/devices/platform/ocp at f1000000/f1011000.i2c/i2c-0/0-001b/hwmon/hwmon?/pwm1 ]; then
+ exit 0
+else
+ FAN_CTRL=$(ls /sys/devices/platform/ocp at f1000000/f1011000.i2c/i2c-0/0-001b/hwmon/hwmon?/pwm1)
+fi
+
+if [ "$CPU_TEMP" -ge "$CPU_HIGH" ]; then
+ echo "255" > $FAN_CTRL
+elif [ "$CPU_TEMP" -ge "$CPU_MID" ]; then
+ echo "100" > $FAN_CTRL
+elif [ "$CPU_TEMP" -ge "$CPU_LOW" ]; then
+ echo "50" > $FAN_CTRL
+else
+ echo "0" > $FAN_CTRL
+fi
diff --git a/target/linux/kirkwood/files/arch/arm/boot/dts/kirkwood-stora.dts b/target/linux/kirkwood/files/arch/arm/boot/dts/kirkwood-stora.dts
new file mode 100644
index 0000000000..577c009144
--- /dev/null
+++ b/target/linux/kirkwood/files/arch/arm/boot/dts/kirkwood-stora.dts
@@ -0,0 +1,227 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Device Tree file for NETGEAR Stora (MS2000/2110)
+ *
+ * Copyright (C) 2013, Arnaud EBALARD <arno at natisbad.org>
+ * Copyright (C) 2021, Zoltan HERPAI <wigyori at uid0.hu>
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+ model = "NETGEAR Stora (MS2000/2110)";
+ compatible = "netgear,stora", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+ memory { /* 128 MB */
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8 earlyprintk";
+ stdout-path = &uart0;
+ };
+
+ ocp at f1000000 {
+ pinctrl: pin-controller at 10000 {
+ pmx_button_power: pmx-button-power {
+ marvell,pins = "mpp36";
+ marvell,function = "gpio";
+ };
+
+ pmx_button_reset: pmx-button-reset {
+ marvell,pins = "mpp38";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_blue_power: pmx-led-blue-power {
+ marvell,pins = "mpp31";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_green_disk1: pmx-led-green-disk1 {
+ marvell,pins = "mpp21";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_green_disk2: pmx-led-green-disk2 {
+ marvell,pins = "mpp20";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_red_disk1: pmx-led-red-disk1 {
+ marvell,pins = "mpp23";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_red_disk2: pmx-led-red-disk2 {
+ marvell,pins = "mpp22";
+ marvell,function = "gpio";
+ };
+
+ pmx_poweroff: pmx-poweroff {
+ marvell,pins = "mpp40";
+ marvell,function = "gpio";
+ };
+
+ pmx_fan_tacho: pmx-fan-tacho {
+ marvell,pins = "mpp41";
+ marvell,function = "gpio";
+ };
+ };
+
+ clocks {
+ pcf8563_clk: pcf8563-oscillator {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <2048>;
+ };
+ };
+
+ i2c at 11000 {
+ status = "okay";
+
+ tc654 at 1b {
+ compatible = "microchip,tc654";
+ reg = <0x1b>;
+ };
+
+ lm75 at 48 {
+ compatible = "national,lm75";
+ reg = <0x48>;
+ };
+
+ pcf8563 at 51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+ };
+
+ serial at 12000 {
+ status = "okay";
+ };
+
+ sata at 80000 {
+ status = "okay";
+ phy-names = "port0", "port1";
+ nr-ports = <2>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = < &pmx_led_blue_power
+ &pmx_led_green_disk1 &pmx_led_green_disk2
+ &pmx_led_red_disk1 &pmx_led_red_disk2 >;
+ pinctrl-names = "default";
+
+ led_power: power {
+ label = "blue:power";
+ gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-on";
+ };
+
+ disk1 {
+ label = "green:disk1";
+ gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "ata1";
+ };
+
+ disk2 {
+ label = "green:disk2";
+ gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "ata2";
+ };
+
+ disk1_fail {
+ label = "red:disk1_fail";
+ gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
+ };
+
+ disk2_fail {
+ label = "red:disk2_fail";
+ gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&pmx_button_power &pmx_button_reset >;
+ pinctrl-names = "default";
+
+ power {
+ label = "Power Button";
+ linux,code = <KEY_POWER>;
+ gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+ };
+
+ reset {
+ label = "Reset Button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-poweroff {
+ compatible = "gpio-poweroff";
+ pinctrl-0 = <&pmx_poweroff>;
+ pinctrl-names = "default";
+ gpios = <&gpio0 40 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&nand {
+ status = "okay";
+ chip-delay = <40>;
+
+ partition at 0 {
+ label = "u-boot";
+ reg = <0x0000000 0x0e0000>;
+ read-only;
+ };
+
+ partition at e0000 {
+ label = "u-boot-env";
+ reg = <0x0e00000 0x020000>;
+ };
+
+ partition at 100000 {
+ label = "ubi";
+ reg = <0x0100000 0xff00000>;
+ };
+};
+
+&mdio {
+ status = "okay";
+
+ ethphy0: ethernet-phy at 0 { /* Marvell 88E1318 */
+ compatible = "marvell,88e1116";
+ reg = <8>;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ ethernet0-port at 0 {
+ phy-handle = <ðphy0>;
+ };
+};
+
+&pciec {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+};
diff --git a/target/linux/kirkwood/image/Makefile b/target/linux/kirkwood/image/Makefile
index 49d0124f43..70c11628f0 100644
--- a/target/linux/kirkwood/image/Makefile
+++ b/target/linux/kirkwood/image/Makefile
@@ -271,6 +271,16 @@ define Device/netgear_readynas-duo-v2
endef
TARGET_DEVICES += netgear_readynas-duo-v2
+define Device/netgear_stora
+ DEVICE_VENDOR := Netgear
+ DEVICE_MODEL := Stora (MS2000/2110)
+ DEVICE_DTS := kirkwood-stora
+ DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 \
+ kmod-rtc-pcf8563 kmod-hwmon-lm75 kmod-hwmon-tc654 \
+ kmod-gpio-button-hotplug
+endef
+TARGET_DEVICES += netgear_stora
+
define Device/raidsonic_ib-nas62x0
DEVICE_VENDOR := RaidSonic
DEVICE_MODEL := ICY BOX IB-NAS62x0
diff --git a/target/linux/kirkwood/patches-5.15/117-netgear_stora.patch b/target/linux/kirkwood/patches-5.15/117-netgear_stora.patch
new file mode 100644
index 0000000000..3ebef23ac4
--- /dev/null
+++ b/target/linux/kirkwood/patches-5.15/117-netgear_stora.patch
@@ -0,0 +1,10 @@
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -339,6 +339,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
+ kirkwood-rs411.dtb \
+ kirkwood-sheevaplug.dtb \
+ kirkwood-sheevaplug-esata.dtb \
++ kirkwood-stora.dtb \
+ kirkwood-t5325.dtb \
+ kirkwood-topkick.dtb \
+ kirkwood-ts219-6281.dtb \
diff --git a/target/linux/kirkwood/patches-6.1/117-netgear_stora.patch b/target/linux/kirkwood/patches-6.1/117-netgear_stora.patch
new file mode 100644
index 0000000000..c7518933b2
--- /dev/null
+++ b/target/linux/kirkwood/patches-6.1/117-netgear_stora.patch
@@ -0,0 +1,10 @@
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -375,6 +375,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
+ kirkwood-rs411.dtb \
+ kirkwood-sheevaplug.dtb \
+ kirkwood-sheevaplug-esata.dtb \
++ kirkwood-stora.dtb \
+ kirkwood-t5325.dtb \
+ kirkwood-topkick.dtb \
+ kirkwood-ts219-6281.dtb \
More information about the lede-commits
mailing list