[openwrt/openwrt] ramips: add support for YunCore G720
LEDE Commits
lede-commits at lists.infradead.org
Tue Mar 12 11:19:03 PDT 2024
dangole pushed a commit to openwrt/openwrt.git, branch main:
https://git.openwrt.org/65df33fc76f722701f161dd88828f61c9e31f1d1
commit 65df33fc76f722701f161dd88828f61c9e31f1d1
Author: Daniel Golle <daniel at makrotopia.org>
AuthorDate: Fri Mar 8 20:20:23 2024 +0000
ramips: add support for YunCore G720
The YunCore G720 is a dual band 802.11ax router with 5 GbE ports.
Specs:
- SoC: MediaTek MT7621
- Ethernet: 5x GbE ports (built-in MT7530)
- Wireless 2.4GHz / 5GHz: MediaTek MT7915E
- RAM: 256MiB
- ROM: 16MiB (W25Q128)
- 1 Button (reset)
- 8 LEDs (1x system, 2x wifi, 5x switch ports)
Flash instructions:
The vendor firmware is based on OpenWrt, the sysupgrade image can be
flashed using the '-F' (force) option on the CLI.
Make sure not to keep settings when doing so.
Signed-off-by: Daniel Golle <daniel at makrotopia.org>
---
target/linux/ramips/dts/mt7621_yuncore_g720.dts | 188 +++++++++++++++++++++
target/linux/ramips/image/mt7621.mk | 10 ++
.../ramips/mt7621/base-files/etc/board.d/01_leds | 3 +-
.../etc/hotplug.d/ieee80211/10_fix_wifi_mac | 3 +-
4 files changed, 202 insertions(+), 2 deletions(-)
diff --git a/target/linux/ramips/dts/mt7621_yuncore_g720.dts b/target/linux/ramips/dts/mt7621_yuncore_g720.dts
new file mode 100644
index 0000000000..4b88064b49
--- /dev/null
+++ b/target/linux/ramips/dts/mt7621_yuncore_g720.dts
@@ -0,0 +1,188 @@
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+#include "mt7621.dtsi"
+
+/ {
+ compatible = "yuncore,g720", "mediatek,mt7621-soc";
+ model = "YunCore G720";
+
+ aliases {
+ label-mac-device = &wifi0;
+ led-boot = &led_sys_red;
+ led-failsafe = &led_sys_red;
+ led-running = &led_sys_red;
+ led-upgrade = &led_sys_red;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_sys_red: led-sys {
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_STATUS;
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ watchdog {
+ compatible = "linux,wdt-gpio";
+ gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+ hw_algo = "toggle";
+ hw_margin_ms = <200>;
+ always-running;
+ };
+};
+
+&gpio {
+ s1 {
+ gpio-hog;
+ line-name = "s1";
+ gpios = <4 GPIO_ACTIVE_LOW>;
+ output-high;
+ };
+
+ s2 {
+ gpio-hog;
+ line-name = "s2";
+ gpios = <3 GPIO_ACTIVE_LOW>;
+ output-high;
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ flash at 0 {
+ compatible = "w25q128", "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition at 0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition at 30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ partition at 40000 {
+ label = "factory";
+ reg = <0x50000 0x40000>;
+ read-only;
+
+ nvmem-layout {
+ compatible = "fixed-layout";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ eeprom_factory_0: eeprom at 0 {
+ reg = <0x0 0xe00>;
+ };
+
+ macaddr_factory_e000: macaddr at e000 {
+ reg = <0xe000 0x6>;
+ };
+
+ macaddr_factory_e006: macaddr at e006 {
+ reg = <0xe006 0x6>;
+ };
+ };
+ };
+
+ partition at 50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x90000 0xf70000>;
+ };
+ };
+ };
+};
+
+&gmac0 {
+ nvmem-cells = <&macaddr_factory_e000>;
+ nvmem-cell-names = "mac-address";
+};
+
+&gmac1 {
+ status = "okay";
+ label = "wan";
+ phy-handle = <ðphy4>;
+
+ nvmem-cells = <&macaddr_factory_e006>;
+ nvmem-cell-names = "mac-address";
+};
+
+&mdio {
+ ethphy4: ethernet-phy at 4 {
+ reg = <4>;
+ };
+};
+
+&switch0 {
+ ports {
+ port at 0 {
+ status = "okay";
+ label = "lan1";
+ };
+
+ port at 1 {
+ status = "okay";
+ label = "lan2";
+ };
+
+ port at 2 {
+ status = "okay";
+ label = "lan3";
+ };
+
+ port at 3 {
+ status = "okay";
+ label = "lan4";
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie1 {
+ wifi0: wifi at 0,0 {
+ compatible = "mediatek,mt76";
+ reg = <0x0000 0 0 0 0>;
+ nvmem-cells = <&eeprom_factory_0>;
+ nvmem-cell-names = "eeprom";
+ };
+};
+
+&state_default {
+ gpio {
+ groups = "jtag", "wdt";
+ function = "gpio";
+ };
+};
diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk
index a46ea39d59..3b9ee022f6 100644
--- a/target/linux/ramips/image/mt7621.mk
+++ b/target/linux/ramips/image/mt7621.mk
@@ -2918,6 +2918,16 @@ define Device/yuncore_fap690
endef
TARGET_DEVICES += yuncore_fap690
+define Device/yuncore_g720
+ $(Device/dsa-migration)
+ DEVICE_VENDOR := YunCore
+ DEVICE_MODEL := G720
+ DEVICE_PACKAGES := kmod-mt7915-firmware
+ IMAGE_SIZE := 15808k
+ SUPPORTED_DEVICES += mt7621-rfb-ax-nor
+endef
+TARGET_DEVICES += yuncore_g720
+
define Device/zbtlink_zbt-we1326
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
index 1061de6f44..81afa45e80 100644
--- a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
@@ -30,7 +30,8 @@ asus,rt-ax53u)
ucidef_set_led_wlan "wlan2g" "WiFi 2.4GHz" "mt76-phy0" "phy0tpt"
ucidef_set_led_wlan "wlan5g" "WiFi 5GHz" "mt76-phy1" "phy1tpt"
;;
-asus,rt-ax54)
+asus,rt-ax54|\
+yuncore,g720)
ucidef_set_led_wlan "wlan2g" "WiFi 2.4GHz" "mt76-phy0" "phy0tpt"
ucidef_set_led_wlan "wlan5g" "WiFi 5GHz" "mt76-phy1" "phy1tpt"
;;
diff --git a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
index 8a977e68ae..3be4e24e09 100644
--- a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
+++ b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
@@ -184,7 +184,8 @@ case "$board" in
hw_mac_addr="$(mtd_get_mac_binary rom_file 0xf100)"
[ "$PHYNBR" = "1" ] && macaddr_add "$hw_mac_addr" 2 > "/sys${DEVPATH}/macaddress"
;;
- yuncore,ax820)
+ yuncore,ax820|\
+ yuncore,g720)
[ "$PHYNBR" = "1" ] && \
macaddr_setbit_la "$(mtd_get_mac_binary Factory 0xe000)" > /sys${DEVPATH}/macaddress
;;
More information about the lede-commits
mailing list