[openwrt/openwrt] mpc85xx: copy patches 5.15 to 6.1
LEDE Commits
lede-commits at lists.infradead.org
Fri Mar 8 08:51:23 PST 2024
chunkeey pushed a commit to openwrt/openwrt.git, branch main:
https://git.openwrt.org/7b01179e620d410f0dfbb98313f29025cd1fdea6
commit 7b01179e620d410f0dfbb98313f29025cd1fdea6
Author: Pawel Dembicki <paweldembicki at gmail.com>
AuthorDate: Tue Nov 21 09:38:37 2023 +0100
mpc85xx: copy patches 5.15 to 6.1
Just copy of config.
Signed-off-by: Pawel Dembicki <paweldembicki at gmail.com>
---
...erpc-85xx-add-gpio-keys-to-of-match-table.patch | 10 ++
.../100-powerpc-85xx-tl-wdr4900-v1-support.patch | 83 ++++++++++
.../101-powerpc-85xx-hiveap-330-support.patch | 30 ++++
.../102-powerpc-add-cmdline-override.patch | 37 +++++
.../103-powerpc-85xx-red-15w-rev1.patch | 29 ++++
...85xx-change-P2020RDB-dts-file-for-OpenWRT.patch | 170 +++++++++++++++++++++
.../105-powerpc-85xx-panda-support.patch | 30 ++++
.../106-powerpc-85xx-ws-ap3710i-support.patch | 30 ++++
.../107-powerpc-85xx-add-ws-ap3825i-support.patch | 65 ++++++++
...08-powerpc-85xx-firebox-t10-support.patch.patch | 29 ++++
.../109-powerpc-85xx-add-ws-ap3715i-support.patch | 50 ++++++
.../110-powerpc-85xx-br200-wp-support.patch | 57 +++++++
...rpc-bootwrapper-disable-uImage-generation.patch | 42 +++++
13 files changed, 662 insertions(+)
diff --git a/target/linux/mpc85xx/patches-6.1/001-powerpc-85xx-add-gpio-keys-to-of-match-table.patch b/target/linux/mpc85xx/patches-6.1/001-powerpc-85xx-add-gpio-keys-to-of-match-table.patch
new file mode 100644
index 0000000000..5e5ab10daf
--- /dev/null
+++ b/target/linux/mpc85xx/patches-6.1/001-powerpc-85xx-add-gpio-keys-to-of-match-table.patch
@@ -0,0 +1,10 @@
+--- a/arch/powerpc/platforms/85xx/common.c
++++ b/arch/powerpc/platforms/85xx/common.c
+@@ -30,6 +30,7 @@ static const struct of_device_id mpc85xx
+ { .compatible = "fsl,mpc8548-guts", },
+ /* Probably unnecessary? */
+ { .compatible = "gpio-leds", },
++ { .compatible = "gpio-keys", },
+ /* For all PCI controllers */
+ { .compatible = "fsl,mpc8540-pci", },
+ { .compatible = "fsl,mpc8548-pcie", },
diff --git a/target/linux/mpc85xx/patches-6.1/100-powerpc-85xx-tl-wdr4900-v1-support.patch b/target/linux/mpc85xx/patches-6.1/100-powerpc-85xx-tl-wdr4900-v1-support.patch
new file mode 100644
index 0000000000..0ecbec3ca4
--- /dev/null
+++ b/target/linux/mpc85xx/patches-6.1/100-powerpc-85xx-tl-wdr4900-v1-support.patch
@@ -0,0 +1,83 @@
+From 1d9f596e572917772b87a2a37e1680902964782f Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg at openwrt.org>
+Date: Wed, 20 Feb 2013 08:40:33 +0100
+Subject: [PATCH] powerpc: 85xx: add support for the TP-Link TL-WDR4900 v1
+ board
+
+This patch adds support for the TP-Link TL-WDR4900 v1
+concurrent dual-band wireless router. The devices uses
+the Freescale P1014 SoC.
+
+Signed-off-by: Gabor Juhos <juhosg at openwrt.org>
+Signed-off-by: Pawel Dembicki <paweldembicki at gmail.com>
+---
+ arch/powerpc/boot/Makefile | 3 ++-
+ arch/powerpc/boot/wrapper | 5 +++++
+ arch/powerpc/platforms/85xx/Kconfig | 12 ++++++++++++
+ arch/powerpc/platforms/85xx/Makefile | 1 +
+ 4 files changed, 20 insertions(+), 1 deletion(-)
+
+--- a/arch/powerpc/boot/Makefile
++++ b/arch/powerpc/boot/Makefile
+@@ -163,6 +163,7 @@ src-plat-$(CONFIG_PPC_PSERIES) += pserie
+ src-plat-$(CONFIG_PPC_POWERNV) += pseries-head.S
+ src-plat-$(CONFIG_PPC_IBM_CELL_BLADE) += pseries-head.S
+ src-plat-$(CONFIG_MVME7100) += motload-head.S mvme7100.c
++src-plat-$(CONFIG_TL_WDR4900_V1) += simpleboot.c fixed-head.S
+
+ src-plat-$(CONFIG_PPC_MICROWATT) += fixed-head.S microwatt.c
+
+@@ -343,7 +344,7 @@ image-$(CONFIG_TQM8548) += cuImage.tqm
+ image-$(CONFIG_TQM8555) += cuImage.tqm8555
+ image-$(CONFIG_TQM8560) += cuImage.tqm8560
+ image-$(CONFIG_KSI8560) += cuImage.ksi8560
+-
++image-$(CONFIG_TL_WDR4900_V1) += simpleImage.tl-wdr4900-v1
+ # Board ports in arch/powerpc/platform/86xx/Kconfig
+ image-$(CONFIG_MVME7100) += dtbImage.mvme7100
+
+--- a/arch/powerpc/boot/wrapper
++++ b/arch/powerpc/boot/wrapper
+@@ -339,6 +339,11 @@ adder875-redboot)
+ platformo="$object/fixed-head.o $object/redboot-8xx.o"
+ binary=y
+ ;;
++simpleboot-tl-wdr4900-v1)
++ platformo="$object/fixed-head.o $object/simpleboot.o"
++ link_address='0x1000000'
++ binary=y
++ ;;
+ simpleboot-*)
+ platformo="$object/fixed-head.o $object/simpleboot.o"
+ binary=y
+--- a/arch/powerpc/platforms/85xx/Kconfig
++++ b/arch/powerpc/platforms/85xx/Kconfig
+@@ -170,6 +170,18 @@ config STX_GP3
+ select CPM2
+ select DEFAULT_UIMAGE
+
++config TL_WDR4900_V1
++ bool "TP-Link TL-WDR4900 v1"
++ select DEFAULT_UIMAGE
++ select ARCH_REQUIRE_GPIOLIB
++ select GPIO_MPC8XXX
++ select SWIOTLB
++ help
++ This option enables support for the TP-Link TL-WDR4900 v1 board.
++
++ This board is a Concurrent Dual-Band wireless router with a
++ Freescale P1014 SoC.
++
+ config TQM8540
+ bool "TQ Components TQM8540"
+ help
+--- a/arch/powerpc/platforms/85xx/Makefile
++++ b/arch/powerpc/platforms/85xx/Makefile
+@@ -27,6 +27,7 @@ obj-$(CONFIG_TWR_P102x) += twr_p102x.o
+ obj-$(CONFIG_CORENET_GENERIC) += corenet_generic.o
+ obj-$(CONFIG_FB_FSL_DIU) += t1042rdb_diu.o
+ obj-$(CONFIG_STX_GP3) += stx_gp3.o
++obj-$(CONFIG_TL_WDR4900_V1) += tl_wdr4900_v1.o
+ obj-$(CONFIG_TQM85xx) += tqm85xx.o
+ obj-$(CONFIG_PPA8548) += ppa8548.o
+ obj-$(CONFIG_SOCRATES) += socrates.o socrates_fpga_pic.o
diff --git a/target/linux/mpc85xx/patches-6.1/101-powerpc-85xx-hiveap-330-support.patch b/target/linux/mpc85xx/patches-6.1/101-powerpc-85xx-hiveap-330-support.patch
new file mode 100644
index 0000000000..da95cd2716
--- /dev/null
+++ b/target/linux/mpc85xx/patches-6.1/101-powerpc-85xx-hiveap-330-support.patch
@@ -0,0 +1,30 @@
+--- a/arch/powerpc/platforms/85xx/Kconfig
++++ b/arch/powerpc/platforms/85xx/Kconfig
+@@ -49,6 +49,17 @@ config BSC9132_QDS
+ and dual StarCore SC3850 DSP cores.
+ Manufacturer : Freescale Semiconductor, Inc
+
++config HIVEAP_330
++ bool "Aerohive HiveAP-330"
++ select DEFAULT_UIMAGE
++ select ARCH_REQUIRE_GPIOLIB
++ select GPIO_MPC8XXX
++ help
++ This option enables support for the Aerohive HiveAP-330 board.
++
++ This board is a Concurrent Dual-Band wireless access point with a
++ Freescale P1020 SoC.
++
+ config MPC8540_ADS
+ bool "Freescale MPC8540 ADS"
+ select DEFAULT_UIMAGE
+--- a/arch/powerpc/platforms/85xx/Makefile
++++ b/arch/powerpc/platforms/85xx/Makefile
+@@ -12,6 +12,7 @@ obj-y += common.o
+ obj-$(CONFIG_BSC9131_RDB) += bsc913x_rdb.o
+ obj-$(CONFIG_BSC9132_QDS) += bsc913x_qds.o
+ obj-$(CONFIG_C293_PCIE) += c293pcie.o
++obj-$(CONFIG_HIVEAP_330) += hiveap-330.o
+ obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads.o
+ obj-$(CONFIG_MPC8560_ADS) += mpc85xx_ads.o
+ obj-$(CONFIG_MPC85xx_CDS) += mpc85xx_cds.o
diff --git a/target/linux/mpc85xx/patches-6.1/102-powerpc-add-cmdline-override.patch b/target/linux/mpc85xx/patches-6.1/102-powerpc-add-cmdline-override.patch
new file mode 100644
index 0000000000..0d26dc8501
--- /dev/null
+++ b/target/linux/mpc85xx/patches-6.1/102-powerpc-add-cmdline-override.patch
@@ -0,0 +1,37 @@
+--- a/arch/powerpc/Kconfig
++++ b/arch/powerpc/Kconfig
+@@ -915,6 +915,14 @@ config CMDLINE_FORCE
+
+ endchoice
+
++config CMDLINE_OVERRIDE
++ bool "Use alternative cmdline from device tree"
++ help
++ Some bootloaders may have uneditable bootargs. While CMDLINE_FORCE can
++ be used, this is not a good option for kernels that are shared across
++ devices. This setting enables using "chosen/cmdline-override" as the
++ cmdline if it exists in the device tree.
++
+ config EXTRA_TARGETS
+ string "Additional default image types"
+ help
+--- a/drivers/of/fdt.c
++++ b/drivers/of/fdt.c
+@@ -1162,6 +1162,17 @@ int __init early_init_dt_scan_chosen(uns
+ if (p != NULL && l > 0)
+ strlcat(data, p, min_t(int, strlen(data) + (int)l, COMMAND_LINE_SIZE));
+
++ /* CONFIG_CMDLINE_OVERRIDE is used to fallback to a different
++ * device tree option of chosen/bootargs-override. This is
++ * helpful on boards where u-boot sets bootargs, and is unable
++ * to be modified.
++ */
++#ifdef CONFIG_CMDLINE_OVERRIDE
++ p = of_get_flat_dt_prop(node, "bootargs-override", &l);
++ if (p != NULL && l > 0)
++ strlcpy(data, p, min((int)l, COMMAND_LINE_SIZE));
++#endif
++
+ /*
+ * CONFIG_CMDLINE is meant to be a default in case nothing else
+ * managed to set the command line, unless CONFIG_CMDLINE_FORCE
diff --git a/target/linux/mpc85xx/patches-6.1/103-powerpc-85xx-red-15w-rev1.patch b/target/linux/mpc85xx/patches-6.1/103-powerpc-85xx-red-15w-rev1.patch
new file mode 100644
index 0000000000..66044878eb
--- /dev/null
+++ b/target/linux/mpc85xx/patches-6.1/103-powerpc-85xx-red-15w-rev1.patch
@@ -0,0 +1,29 @@
+--- a/arch/powerpc/platforms/85xx/Kconfig
++++ b/arch/powerpc/platforms/85xx/Kconfig
+@@ -173,6 +173,16 @@ config XES_MPC85xx
+ Manufacturer: Extreme Engineering Solutions, Inc.
+ URL: <https://www.xes-inc.com/>
+
++config RED_15W_REV1
++ bool "Sophos RED 15w Rev.1"
++ select DEFAULT_UIMAGE
++ select ARCH_REQUIRE_GPIOLIB
++ select GPIO_MPC8XXX
++ help
++ This option enables support for the Sophos RED 15w Rev.1 board.
++
++ This board is a wireless VPN router with a Freescale P1010 SoC.
++
+ config STX_GP3
+ bool "Silicon Turnkey Express GP3"
+ help
+--- a/arch/powerpc/platforms/85xx/Makefile
++++ b/arch/powerpc/platforms/85xx/Makefile
+@@ -27,6 +27,7 @@ obj-$(CONFIG_P1023_RDB) += p1023_rdb.o
+ obj-$(CONFIG_TWR_P102x) += twr_p102x.o
+ obj-$(CONFIG_CORENET_GENERIC) += corenet_generic.o
+ obj-$(CONFIG_FB_FSL_DIU) += t1042rdb_diu.o
++obj-$(CONFIG_RED_15W_REV1) += red15w_rev1.o
+ obj-$(CONFIG_STX_GP3) += stx_gp3.o
+ obj-$(CONFIG_TL_WDR4900_V1) += tl_wdr4900_v1.o
+ obj-$(CONFIG_TQM85xx) += tqm85xx.o
diff --git a/target/linux/mpc85xx/patches-6.1/104-powerpc-mpc85xx-change-P2020RDB-dts-file-for-OpenWRT.patch b/target/linux/mpc85xx/patches-6.1/104-powerpc-mpc85xx-change-P2020RDB-dts-file-for-OpenWRT.patch
new file mode 100644
index 0000000000..94ed26c3df
--- /dev/null
+++ b/target/linux/mpc85xx/patches-6.1/104-powerpc-mpc85xx-change-P2020RDB-dts-file-for-OpenWRT.patch
@@ -0,0 +1,170 @@
+From 93514afd769c305182beeed1f9c4c46235879ef8 Mon Sep 17 00:00:00 2001
+From: Pawel Dembicki <paweldembicki at gmail.com>
+Date: Sun, 30 Dec 2018 23:24:41 +0100
+Subject: [PATCH] powerpc: mpc85xx: change P2020RDB dts file for OpenWRT
+
+This patch apply chages for OpenWRT in P2020RDB
+dts file.
+
+Signed-off-by: Pawel Dembicki <paweldembicki at gmail.com>
+---
+ arch/powerpc/boot/dts/fsl/p2020rdb.dts | 98 +++++++++++++++++---------
+ 1 file changed, 63 insertions(+), 35 deletions(-)
+
+--- a/arch/powerpc/boot/dts/fsl/p2020rdb.dts
++++ b/arch/powerpc/boot/dts/fsl/p2020rdb.dts
+@@ -5,10 +5,15 @@
+ * Copyright 2009-2012 Freescale Semiconductor Inc.
+ */
+
++/dts-v1/;
++
+ /include/ "p2020si-pre.dtsi"
+
++#include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/input/input.h>
++
+ / {
+- model = "fsl,P2020RDB";
++ model = "Freescale P2020RDB";
+ compatible = "fsl,P2020RDB";
+
+ aliases {
+@@ -34,48 +39,38 @@
+ 0x2 0x0 0x0 0xffb00000 0x00020000>;
+
+ nor at 0,0 {
+- #address-cells = <1>;
+- #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x1000000>;
+ bank-width = <2>;
+ device-width = <1>;
+
+- partition at 0 {
+- /* This location must not be altered */
+- /* 256KB for Vitesse 7385 Switch firmware */
+- reg = <0x0 0x00040000>;
+- label = "NOR (RO) Vitesse-7385 Firmware";
+- read-only;
+- };
+-
+- partition at 40000 {
+- /* 256KB for DTB Image */
+- reg = <0x00040000 0x00040000>;
+- label = "NOR (RO) DTB Image";
+- read-only;
+- };
++ partitions {
++ compatible = "fixed-partitions";
++ #address-cells = <1>;
++ #size-cells = <1>;
+
+- partition at 80000 {
+- /* 3.5 MB for Linux Kernel Image */
+- reg = <0x00080000 0x00380000>;
+- label = "NOR (RO) Linux Kernel Image";
+- read-only;
+- };
++ partition at 0 {
++ /* This location must not be altered */
++ /* 256KB for Vitesse 7385 Switch firmware */
++ reg = <0x0 0x00040000>;
++ label = "NOR (RO) Vitesse-7385 Firmware";
++ read-only;
++ };
+
+- partition at 400000 {
+- /* 11MB for JFFS2 based Root file System */
+- reg = <0x00400000 0x00b00000>;
+- label = "NOR (RW) JFFS2 Root File System";
+- };
++ partition at 40000 {
++ compatible = "denx,fit";
++ reg = <0x00040000 0x00ec0000>;
++ label = "firmware";
++ };
+
+- partition at f00000 {
+- /* This location must not be altered */
+- /* 512KB for u-boot Bootloader Image */
+- /* 512KB for u-boot Environment Variables */
+- reg = <0x00f00000 0x00100000>;
+- label = "NOR (RO) U-Boot Image";
+- read-only;
++ partition at f00000 {
++ /* This location must not be altered */
++ /* 512KB for u-boot Bootloader Image */
++ /* 512KB for u-boot Environment Variables */
++ reg = <0x00f00000 0x00100000>;
++ label = "u-boot";
++ read-only;
++ };
+ };
+ };
+
+@@ -85,6 +80,7 @@
+ compatible = "fsl,p2020-fcm-nand",
+ "fsl,elbc-fcm-nand";
+ reg = <0x1 0x0 0x40000>;
++ nand-ecc-mode = "none";
+
+ partition at 0 {
+ /* This location must not be altered */
+@@ -140,13 +136,43 @@
+ soc: soc at ffe00000 {
+ ranges = <0x0 0x0 0xffe00000 0x100000>;
+
++ gpio0: gpio-controller at fc00 {
++ };
++
+ i2c at 3000 {
++ temperature-sensor at 4c {
++ compatible = "adi,adt7461";
++ reg = <0x4c>;
++ };
++
++ eeprom at 50 {
++ compatible = "atmel,24c256";
++ reg = <0x50>;
++ };
++
+ rtc at 68 {
+ compatible = "dallas,ds1339";
+ reg = <0x68>;
+ };
+ };
+
++ i2c at 3100 {
++ pmic at 11 {
++ compatible = "zl2006";
++ reg = <0x11>;
++ };
++
++ gpio at 18 {
++ compatible = "nxp,pca9557";
++ reg = <0x18>;
++ };
++
++ eeprom at 52 {
++ compatible = "atmel,24c01";
++ reg = <0x52>;
++ };
++ };
++
+ spi at 7000 {
+ flash at 0 {
+ #address-cells = <1>;
+@@ -200,10 +226,12 @@
+ phy0: ethernet-phy at 0 {
+ interrupts = <3 1 0 0>;
+ reg = <0x0>;
++ reset-gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ };
+ phy1: ethernet-phy at 1 {
+ interrupts = <3 1 0 0>;
+ reg = <0x1>;
++ reset-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+ };
+ tbi-phy at 2 {
+ device_type = "tbi-phy";
diff --git a/target/linux/mpc85xx/patches-6.1/105-powerpc-85xx-panda-support.patch b/target/linux/mpc85xx/patches-6.1/105-powerpc-85xx-panda-support.patch
new file mode 100644
index 0000000000..4913c614a8
--- /dev/null
+++ b/target/linux/mpc85xx/patches-6.1/105-powerpc-85xx-panda-support.patch
@@ -0,0 +1,30 @@
+--- a/arch/powerpc/platforms/85xx/Kconfig
++++ b/arch/powerpc/platforms/85xx/Kconfig
+@@ -60,6 +60,17 @@ config HIVEAP_330
+ This board is a Concurrent Dual-Band wireless access point with a
+ Freescale P1020 SoC.
+
++config PANDA
++ bool "OCEDO PANDA"
++ select DEFAULT_UIMAGE
++ select ARCH_REQUIRE_GPIOLIB
++ select GPIO_MPC8XXX
++ help
++ This option enables support for the OCEDO PANDA board.
++
++ This board is a Concurrent Dual-Band wireless access point with a
++ Freescale P1020 SoC.
++
+ config MPC8540_ADS
+ bool "Freescale MPC8540 ADS"
+ select DEFAULT_UIMAGE
+--- a/arch/powerpc/platforms/85xx/Makefile
++++ b/arch/powerpc/platforms/85xx/Makefile
+@@ -24,6 +24,7 @@ obj-$(CONFIG_P1010_RDB) += p1010rdb.o
+ obj-$(CONFIG_P1022_DS) += p1022_ds.o
+ obj-$(CONFIG_P1022_RDK) += p1022_rdk.o
+ obj-$(CONFIG_P1023_RDB) += p1023_rdb.o
++obj-$(CONFIG_PANDA) += panda.o
+ obj-$(CONFIG_TWR_P102x) += twr_p102x.o
+ obj-$(CONFIG_CORENET_GENERIC) += corenet_generic.o
+ obj-$(CONFIG_FB_FSL_DIU) += t1042rdb_diu.o
diff --git a/target/linux/mpc85xx/patches-6.1/106-powerpc-85xx-ws-ap3710i-support.patch b/target/linux/mpc85xx/patches-6.1/106-powerpc-85xx-ws-ap3710i-support.patch
new file mode 100644
index 0000000000..124376ffd9
--- /dev/null
+++ b/target/linux/mpc85xx/patches-6.1/106-powerpc-85xx-ws-ap3710i-support.patch
@@ -0,0 +1,30 @@
+--- a/arch/powerpc/platforms/85xx/Kconfig
++++ b/arch/powerpc/platforms/85xx/Kconfig
+@@ -71,6 +71,17 @@ config PANDA
+ This board is a Concurrent Dual-Band wireless access point with a
+ Freescale P1020 SoC.
+
++config WS_AP3710I
++ bool "Enterasys WS-AP3710i"
++ select DEFAULT_UIMAGE
++ select ARCH_REQUIRE_GPIOLIB
++ select GPIO_MPC8XXX
++ help
++ This option enables support for the Enterasys WS-AP3710i board.
++
++ This board is a Concurrent Dual-Band wireless access point with a
++ Freescale P1020 SoC.
++
+ config MPC8540_ADS
+ bool "Freescale MPC8540 ADS"
+ select DEFAULT_UIMAGE
+--- a/arch/powerpc/platforms/85xx/Makefile
++++ b/arch/powerpc/platforms/85xx/Makefile
+@@ -26,6 +26,7 @@ obj-$(CONFIG_P1022_RDK) += p1022_rdk.o
+ obj-$(CONFIG_P1023_RDB) += p1023_rdb.o
+ obj-$(CONFIG_PANDA) += panda.o
+ obj-$(CONFIG_TWR_P102x) += twr_p102x.o
++obj-$(CONFIG_WS_AP3710I) += ws-ap3710i.o
+ obj-$(CONFIG_CORENET_GENERIC) += corenet_generic.o
+ obj-$(CONFIG_FB_FSL_DIU) += t1042rdb_diu.o
+ obj-$(CONFIG_RED_15W_REV1) += red15w_rev1.o
diff --git a/target/linux/mpc85xx/patches-6.1/107-powerpc-85xx-add-ws-ap3825i-support.patch b/target/linux/mpc85xx/patches-6.1/107-powerpc-85xx-add-ws-ap3825i-support.patch
new file mode 100644
index 0000000000..bd731a2344
--- /dev/null
+++ b/target/linux/mpc85xx/patches-6.1/107-powerpc-85xx-add-ws-ap3825i-support.patch
@@ -0,0 +1,65 @@
+From 2fa1a7983ef30f3c7486f9b07c001bee87d1f6d6 Mon Sep 17 00:00:00 2001
+From: Martin Kennedy <hurricos at gmail.com>
+Date: Sat, 1 Jan 2022 11:01:37 -0500
+Subject: [PATCH] PowerPC 85xx: Add WS-AP3825i support
+
+This patch adds support for building Linux for the Extreme Networks
+WS-AP3825i AP.
+
+--- a/arch/powerpc/platforms/85xx/Kconfig
++++ b/arch/powerpc/platforms/85xx/Kconfig
+@@ -82,6 +82,16 @@ config WS_AP3710I
+ This board is a Concurrent Dual-Band wireless access point with a
+ Freescale P1020 SoC.
+
++config WS_AP3825I
++ bool "Extreme Networks WS-AP3825i"
++ select DEFAULT_UIMAGE
++ select ARCH_REQUIRE_GPIOLIB
++ select GPIO_MPC8XXX
++ help
++ This option enables support for the Extreme Networks WS-AP3825i board.
++ This board is a Concurrent Dual-Band wireless access point with a
++ Freescale P1020 SoC.
++
+ config MPC8540_ADS
+ bool "Freescale MPC8540 ADS"
+ select DEFAULT_UIMAGE
+--- a/arch/powerpc/platforms/85xx/Makefile
++++ b/arch/powerpc/platforms/85xx/Makefile
+@@ -27,6 +27,7 @@ obj-$(CONFIG_P1023_RDB) += p1023_rdb.o
+ obj-$(CONFIG_PANDA) += panda.o
+ obj-$(CONFIG_TWR_P102x) += twr_p102x.o
+ obj-$(CONFIG_WS_AP3710I) += ws-ap3710i.o
++obj-$(CONFIG_WS_AP3825I) += ws-ap3825i.o
+ obj-$(CONFIG_CORENET_GENERIC) += corenet_generic.o
+ obj-$(CONFIG_FB_FSL_DIU) += t1042rdb_diu.o
+ obj-$(CONFIG_RED_15W_REV1) += red15w_rev1.o
+--- a/arch/powerpc/boot/Makefile
++++ b/arch/powerpc/boot/Makefile
+@@ -164,6 +164,7 @@ src-plat-$(CONFIG_PPC_POWERNV) += pserie
+ src-plat-$(CONFIG_PPC_IBM_CELL_BLADE) += pseries-head.S
+ src-plat-$(CONFIG_MVME7100) += motload-head.S mvme7100.c
+ src-plat-$(CONFIG_TL_WDR4900_V1) += simpleboot.c fixed-head.S
++src-plat-$(CONFIG_WS_AP3825I) += simpleboot.c fixed-head.S
+
+ src-plat-$(CONFIG_PPC_MICROWATT) += fixed-head.S microwatt.c
+
+@@ -345,6 +346,7 @@ image-$(CONFIG_TQM8555) += cuImage.tqm
+ image-$(CONFIG_TQM8560) += cuImage.tqm8560
+ image-$(CONFIG_KSI8560) += cuImage.ksi8560
+ image-$(CONFIG_TL_WDR4900_V1) += simpleImage.tl-wdr4900-v1
++image-$(CONFIG_WS_AP3825I) += simpleImage.ws-ap3825i
+ # Board ports in arch/powerpc/platform/86xx/Kconfig
+ image-$(CONFIG_MVME7100) += dtbImage.mvme7100
+
+--- a/arch/powerpc/boot/wrapper
++++ b/arch/powerpc/boot/wrapper
+@@ -339,6 +339,7 @@ adder875-redboot)
+ platformo="$object/fixed-head.o $object/redboot-8xx.o"
+ binary=y
+ ;;
++simpleboot-ws-ap3825i|\
+ simpleboot-tl-wdr4900-v1)
+ platformo="$object/fixed-head.o $object/simpleboot.o"
+ link_address='0x1000000'
diff --git a/target/linux/mpc85xx/patches-6.1/108-powerpc-85xx-firebox-t10-support.patch.patch b/target/linux/mpc85xx/patches-6.1/108-powerpc-85xx-firebox-t10-support.patch.patch
new file mode 100644
index 0000000000..b074113eaa
--- /dev/null
+++ b/target/linux/mpc85xx/patches-6.1/108-powerpc-85xx-firebox-t10-support.patch.patch
@@ -0,0 +1,29 @@
+--- a/arch/powerpc/platforms/85xx/Kconfig
++++ b/arch/powerpc/platforms/85xx/Kconfig
+@@ -92,6 +92,16 @@ config WS_AP3825I
+ This board is a Concurrent Dual-Band wireless access point with a
+ Freescale P1020 SoC.
+
++config FIREBOX_T10
++ bool "Watchguard Firebox T10"
++ select DEFAULT_UIMAGE
++ select ARCH_REQUIRE_GPIOLIB
++ select GPIO_MPC8XXX
++ help
++ This option enables support for the Watchguard Firebox T10 board.
++ This board is a VPN Gateway-Router with a
++ Freescale P1010 SoC.
++
+ config MPC8540_ADS
+ bool "Freescale MPC8540 ADS"
+ select DEFAULT_UIMAGE
+--- a/arch/powerpc/platforms/85xx/Makefile
++++ b/arch/powerpc/platforms/85xx/Makefile
+@@ -28,6 +28,7 @@ obj-$(CONFIG_PANDA) += panda.o
+ obj-$(CONFIG_TWR_P102x) += twr_p102x.o
+ obj-$(CONFIG_WS_AP3710I) += ws-ap3710i.o
+ obj-$(CONFIG_WS_AP3825I) += ws-ap3825i.o
++obj-$(CONFIG_FIREBOX_T10) += firebox_t10.o
+ obj-$(CONFIG_CORENET_GENERIC) += corenet_generic.o
+ obj-$(CONFIG_FB_FSL_DIU) += t1042rdb_diu.o
+ obj-$(CONFIG_RED_15W_REV1) += red15w_rev1.o
diff --git a/target/linux/mpc85xx/patches-6.1/109-powerpc-85xx-add-ws-ap3715i-support.patch b/target/linux/mpc85xx/patches-6.1/109-powerpc-85xx-add-ws-ap3715i-support.patch
new file mode 100644
index 0000000000..692cef0417
--- /dev/null
+++ b/target/linux/mpc85xx/patches-6.1/109-powerpc-85xx-add-ws-ap3715i-support.patch
@@ -0,0 +1,50 @@
+--- a/arch/powerpc/platforms/85xx/Kconfig
++++ b/arch/powerpc/platforms/85xx/Kconfig
+@@ -82,6 +82,17 @@ config WS_AP3710I
+ This board is a Concurrent Dual-Band wireless access point with a
+ Freescale P1020 SoC.
+
++config WS_AP3715I
++ bool "Enterasys WS-AP3715i"
++ select DEFAULT_UIMAGE
++ select ARCH_REQUIRE_GPIOLIB
++ select GPIO_MPC8XXX
++ help
++ This option enables support for the Enterasys WS-AP3715i board.
++
++ This board is a Concurrent Dual-Band wireless access point with a
++ Freescale P1010 SoC.
++
+ config WS_AP3825I
+ bool "Extreme Networks WS-AP3825i"
+ select DEFAULT_UIMAGE
+--- a/arch/powerpc/platforms/85xx/Makefile
++++ b/arch/powerpc/platforms/85xx/Makefile
+@@ -27,6 +27,7 @@ obj-$(CONFIG_P1023_RDB) += p1023_rdb.o
+ obj-$(CONFIG_PANDA) += panda.o
+ obj-$(CONFIG_TWR_P102x) += twr_p102x.o
+ obj-$(CONFIG_WS_AP3710I) += ws-ap3710i.o
++obj-$(CONFIG_WS_AP3715I) += ws-ap3715i.o
+ obj-$(CONFIG_WS_AP3825I) += ws-ap3825i.o
+ obj-$(CONFIG_FIREBOX_T10) += firebox_t10.o
+ obj-$(CONFIG_CORENET_GENERIC) += corenet_generic.o
+--- a/arch/powerpc/boot/Makefile
++++ b/arch/powerpc/boot/Makefile
+@@ -346,6 +346,7 @@ image-$(CONFIG_TQM8555) += cuImage.tqm
+ image-$(CONFIG_TQM8560) += cuImage.tqm8560
+ image-$(CONFIG_KSI8560) += cuImage.ksi8560
+ image-$(CONFIG_TL_WDR4900_V1) += simpleImage.tl-wdr4900-v1
++image-$(CONFIG_WS_AP3715I) += simpleImage.ws-ap3715i
+ image-$(CONFIG_WS_AP3825I) += simpleImage.ws-ap3825i
+ # Board ports in arch/powerpc/platform/86xx/Kconfig
+ image-$(CONFIG_MVME7100) += dtbImage.mvme7100
+--- a/arch/powerpc/boot/wrapper
++++ b/arch/powerpc/boot/wrapper
+@@ -339,6 +339,7 @@ adder875-redboot)
+ platformo="$object/fixed-head.o $object/redboot-8xx.o"
+ binary=y
+ ;;
++simpleboot-ws-ap3715i|\
+ simpleboot-ws-ap3825i|\
+ simpleboot-tl-wdr4900-v1)
+ platformo="$object/fixed-head.o $object/simpleboot.o"
diff --git a/target/linux/mpc85xx/patches-6.1/110-powerpc-85xx-br200-wp-support.patch b/target/linux/mpc85xx/patches-6.1/110-powerpc-85xx-br200-wp-support.patch
new file mode 100644
index 0000000000..eb70a4c4c4
--- /dev/null
+++ b/target/linux/mpc85xx/patches-6.1/110-powerpc-85xx-br200-wp-support.patch
@@ -0,0 +1,57 @@
+--- a/arch/powerpc/platforms/85xx/Kconfig
++++ b/arch/powerpc/platforms/85xx/Kconfig
+@@ -49,6 +49,16 @@ config BSC9132_QDS
+ and dual StarCore SC3850 DSP cores.
+ Manufacturer : Freescale Semiconductor, Inc
+
++config BR200_WP
++ bool "Aerohive BR200-WP"
++ select DEFAULT_UIMAGE
++ select ARCH_REQUIRE_GPIOLIB
++ select GPIO_MPC8XXX
++ help
++ This option enables support for the Aerohive BR200-WP board.
++
++ This board is a wireless router with a Freescale P1011 SoC.
++
+ config HIVEAP_330
+ bool "Aerohive HiveAP-330"
+ select DEFAULT_UIMAGE
+--- a/arch/powerpc/platforms/85xx/Makefile
++++ b/arch/powerpc/platforms/85xx/Makefile
+@@ -12,6 +12,7 @@ obj-y += common.o
+ obj-$(CONFIG_BSC9131_RDB) += bsc913x_rdb.o
+ obj-$(CONFIG_BSC9132_QDS) += bsc913x_qds.o
+ obj-$(CONFIG_C293_PCIE) += c293pcie.o
++obj-$(CONFIG_BR200_WP) += br200-wp.o
+ obj-$(CONFIG_HIVEAP_330) += hiveap-330.o
+ obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads.o
+ obj-$(CONFIG_MPC8560_ADS) += mpc85xx_ads.o
+--- a/arch/powerpc/boot/Makefile
++++ b/arch/powerpc/boot/Makefile
+@@ -163,6 +163,7 @@ src-plat-$(CONFIG_PPC_PSERIES) += pserie
+ src-plat-$(CONFIG_PPC_POWERNV) += pseries-head.S
+ src-plat-$(CONFIG_PPC_IBM_CELL_BLADE) += pseries-head.S
+ src-plat-$(CONFIG_MVME7100) += motload-head.S mvme7100.c
++src-plat-$(CONFIG_BR200_WP) += simpleboot.c fixed-head.S
+ src-plat-$(CONFIG_TL_WDR4900_V1) += simpleboot.c fixed-head.S
+ src-plat-$(CONFIG_WS_AP3825I) += simpleboot.c fixed-head.S
+
+@@ -345,6 +346,7 @@ image-$(CONFIG_TQM8548) += cuImage.tqm
+ image-$(CONFIG_TQM8555) += cuImage.tqm8555
+ image-$(CONFIG_TQM8560) += cuImage.tqm8560
+ image-$(CONFIG_KSI8560) += cuImage.ksi8560
++image-$(CONFIG_BR200_WP) += simpleImage.br200-wp
+ image-$(CONFIG_TL_WDR4900_V1) += simpleImage.tl-wdr4900-v1
+ image-$(CONFIG_WS_AP3715I) += simpleImage.ws-ap3715i
+ image-$(CONFIG_WS_AP3825I) += simpleImage.ws-ap3825i
+--- a/arch/powerpc/boot/wrapper
++++ b/arch/powerpc/boot/wrapper
+@@ -339,6 +339,7 @@ adder875-redboot)
+ platformo="$object/fixed-head.o $object/redboot-8xx.o"
+ binary=y
+ ;;
++simpleboot-br200-wp|\
+ simpleboot-ws-ap3715i|\
+ simpleboot-ws-ap3825i|\
+ simpleboot-tl-wdr4900-v1)
diff --git a/target/linux/mpc85xx/patches-6.1/900-powerpc-bootwrapper-disable-uImage-generation.patch b/target/linux/mpc85xx/patches-6.1/900-powerpc-bootwrapper-disable-uImage-generation.patch
new file mode 100644
index 0000000000..1af5aefe0b
--- /dev/null
+++ b/target/linux/mpc85xx/patches-6.1/900-powerpc-bootwrapper-disable-uImage-generation.patch
@@ -0,0 +1,42 @@
+From d43ab14605510d9d2bd257a8cd70f24ada4621b0 Mon Sep 17 00:00:00 2001
+From: David Bauer <mail at david-bauer.net>
+Date: Sat, 29 Feb 2020 14:27:04 +0100
+Subject: [PATCH] powerpc: bootwrapper: disable uImage generation
+
+Due to CONFIG_KERNEL_XZ symbol, the bootwrapper code tries to
+instruct the mkimage to use the xz compression, which isn't
+supported. This disables the uImage generation, as OpenWrt
+generates individual uImages for each board using it's own
+toolchain.
+
+Signed-off-by: David Bauer <mail at david-bauer.net>
+---
+ arch/powerpc/boot/Makefile | 9 ---------
+ 1 file changed, 9 deletions(-)
+
+--- a/arch/powerpc/boot/Makefile
++++ b/arch/powerpc/boot/Makefile
+@@ -274,7 +274,6 @@ image-$(CONFIG_PPC_CHRP) += zImage.chrp
+ image-$(CONFIG_PPC_EFIKA) += zImage.chrp
+ image-$(CONFIG_PPC_PMAC) += zImage.pmac
+ image-$(CONFIG_PPC_HOLLY) += dtbImage.holly
+-image-$(CONFIG_DEFAULT_UIMAGE) += uImage
+ image-$(CONFIG_EPAPR_BOOT) += zImage.epapr
+
+ #
+@@ -409,15 +408,6 @@ $(obj)/dtbImage.%: vmlinux $(wrapperbits
+ $(obj)/vmlinux.strip: vmlinux
+ $(STRIP) -s -R .comment $< -o $@
+
+-$(obj)/uImage: vmlinux $(wrapperbits) FORCE
+- $(call if_changed,wrap,uboot)
+-
+-$(obj)/uImage.initrd.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE
+- $(call if_changed,wrap,uboot-$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz)
+-
+-$(obj)/uImage.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE
+- $(call if_changed,wrap,uboot-$*,,$(obj)/dts/$*.dtb)
+-
+ $(obj)/cuImage.initrd.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE
+ $(call if_changed,wrap,cuboot-$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz)
+
More information about the lede-commits
mailing list