[openwrt/openwrt] Revert "mac80211: ath10k: replace LEDs patch with upstream patch"
LEDE Commits
lede-commits at lists.infradead.org
Mon Jun 17 09:50:17 PDT 2024
ansuel pushed a commit to openwrt/openwrt.git, branch main:
https://git.openwrt.org/29b98a019270da41ca7b4cb9c0a69b3dee48893d
commit 29b98a019270da41ca7b4cb9c0a69b3dee48893d
Author: Christian Marangi <ansuelsmth at gmail.com>
AuthorDate: Mon Jun 17 18:33:19 2024 +0200
Revert "mac80211: ath10k: replace LEDs patch with upstream patch"
This reverts commit dc9c5d1ee72564d97b7d76ab4db239e038916d31.
Additional file for ath10k-ct slipped in, revert for a better version
pushed later.
Signed-off-by: Christian Marangi <ansuelsmth at gmail.com>
---
...O-controlling-support-for.patch:Zone.Identifier | 0
...-add-LED-and-GPIO-controlling-support-for.patch | 645 ---------------------
...controlling-support-for-various-chipsets.patch} | 291 +++++-----
.../975-ath10k-use-tpt-trigger-by-default.patch | 4 +-
...84-ath10k-Try-to-get-mac-address-from-dts.patch | 2 +-
5 files changed, 141 insertions(+), 801 deletions(-)
diff --git a/package/kernel/ath10k-ct/patches/0001-wifi-ath10k-add-LED-and-GPIO-controlling-support-for.patch:Zone.Identifier b/package/kernel/ath10k-ct/patches/0001-wifi-ath10k-add-LED-and-GPIO-controlling-support-for.patch:Zone.Identifier
deleted file mode 100644
index e69de29bb2..0000000000
diff --git a/package/kernel/ath10k-ct/patches/201-wifi-ath10k-add-LED-and-GPIO-controlling-support-for.patch b/package/kernel/ath10k-ct/patches/201-wifi-ath10k-add-LED-and-GPIO-controlling-support-for.patch
deleted file mode 100644
index c8d74f0e4a..0000000000
--- a/package/kernel/ath10k-ct/patches/201-wifi-ath10k-add-LED-and-GPIO-controlling-support-for.patch
+++ /dev/null
@@ -1,645 +0,0 @@
-From 8e1debd82466a3fe711784ab37e6b54e56011267 Mon Sep 17 00:00:00 2001
-From: Sebastian Gottschall <s.gottschall at dd-wrt.com>
-Date: Mon, 13 May 2024 17:22:25 +0300
-Subject: [PATCH] wifi: ath10k: add LED and GPIO controlling support for
- various chipsets
-
-Adds LED and GPIO Control support for 988x, 9887, 9888, 99x0, 9984
-based chipsets with on chipset connected led's using WMI Firmware API.
-The LED device will get available named as "ath10k-phyX" at sysfs and
-can be controlled with various triggers.
-Adds also debugfs interface for gpio control.
-
-Signed-off-by: Sebastian Gottschall <s.gottschall at dd-wrt.com>
-Reviewed-by: Steve deRosier <derosier at cal-sierra.com>
-[kvalo: major reorg and cleanup]
-Signed-off-by: Kalle Valo <kvalo at codeaurora.org>
-[ansuel: rebase and small cleanup]
-Signed-off-by: Christian Marangi <ansuelsmth at gmail.com>
-Tested-by: Stefan Lippers-Hollmann <s.l-h at gmx.de>
-Signed-off-by: Kalle Valo <quic_kvalo at quicinc.com>
-Link: https://msgid.link/20230611080505.17393-1-ansuelsmth@gmail.com
----
- drivers/net/wireless/ath/ath10k/Kconfig | 6 ++
- drivers/net/wireless/ath/ath10k/Makefile | 1 +
- drivers/net/wireless/ath/ath10k/core.c | 32 ++++++++
- drivers/net/wireless/ath/ath10k/core.h | 8 ++
- drivers/net/wireless/ath/ath10k/hw.h | 1 +
- drivers/net/wireless/ath/ath10k/leds.c | 90 +++++++++++++++++++++++
- drivers/net/wireless/ath/ath10k/leds.h | 34 +++++++++
- drivers/net/wireless/ath/ath10k/mac.c | 1 +
- drivers/net/wireless/ath/ath10k/wmi-ops.h | 32 ++++++++
- drivers/net/wireless/ath/ath10k/wmi-tlv.c | 2 +
- drivers/net/wireless/ath/ath10k/wmi.c | 54 ++++++++++++++
- drivers/net/wireless/ath/ath10k/wmi.h | 35 +++++++++
- 12 files changed, 296 insertions(+)
- create mode 100644 drivers/net/wireless/ath/ath10k/leds.c
- create mode 100644 drivers/net/wireless/ath/ath10k/leds.h
-
-diff --git a/drivers/net/wireless/ath/ath10k/Kconfig b/drivers/net/wireless/ath/ath10k/Kconfig
-index e6ea884cafc1..76572cd2e1ba 100644
---- a/drivers/net/wireless/ath/ath10k/Kconfig
-+++ b/drivers/net/wireless/ath/ath10k/Kconfig
-@@ -67,6 +67,12 @@ config ATH10K_DEBUGFS
-
- If unsure, say Y to make it easier to debug problems.
-
-+config ATH10K_LEDS
-+ bool
-+ depends on ATH10K
-+ depends on LEDS_CLASS=y || LEDS_CLASS=MAC80211
-+ default y
-+
- config ATH10K_SPECTRAL
- bool "Atheros ath10k spectral scan support"
- depends on ATH10K_DEBUGFS
-diff --git a/drivers/net/wireless/ath/ath10k/Makefile b/drivers/net/wireless/ath/ath10k/Makefile
-index 142c777b287f..02bf9b629038 100644
---- a/drivers/net/wireless/ath/ath10k/Makefile
-+++ b/drivers/net/wireless/ath/ath10k/Makefile
-@@ -19,6 +19,7 @@ ath10k_core-$(CONFIG_ATH10K_SPECTRAL) += spectral.o
- ath10k_core-$(CONFIG_NL80211_TESTMODE) += testmode.o
- ath10k_core-$(CONFIG_ATH10K_TRACING) += trace.o
- ath10k_core-$(CONFIG_THERMAL) += thermal.o
-+ath10k_core-$(CONFIG_ATH10K_LEDS) += leds.o
- ath10k_core-$(CONFIG_MAC80211_DEBUGFS) += debugfs_sta.o
- ath10k_core-$(CONFIG_PM) += wow.o
- ath10k_core-$(CONFIG_DEV_COREDUMP) += coredump.o
-diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
-index bdf0552cd1c3..b3294287bce1 100644
---- a/drivers/net/wireless/ath/ath10k/core.c
-+++ b/drivers/net/wireless/ath/ath10k/core.c
-@@ -27,6 +27,7 @@
- #include "testmode.h"
- #include "wmi-ops.h"
- #include "coredump.h"
-+#include "leds.h"
-
- unsigned int ath10k_debug_mask;
- EXPORT_SYMBOL(ath10k_debug_mask);
-@@ -68,6 +69,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
- .name = "qca988x hw2.0",
- .patch_load_addr = QCA988X_HW_2_0_PATCH_LOAD_ADDR,
- .uart_pin = 7,
-+ .led_pin = 1,
- .cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_ALL,
- .otp_exe_param = 0,
- .channel_counters_freq_hz = 88000,
-@@ -108,6 +110,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
- .name = "qca988x hw2.0 ubiquiti",
- .patch_load_addr = QCA988X_HW_2_0_PATCH_LOAD_ADDR,
- .uart_pin = 7,
-+ .led_pin = 0,
- .cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_ALL,
- .otp_exe_param = 0,
- .channel_counters_freq_hz = 88000,
-@@ -149,6 +152,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
- .name = "qca9887 hw1.0",
- .patch_load_addr = QCA9887_HW_1_0_PATCH_LOAD_ADDR,
- .uart_pin = 7,
-+ .led_pin = 1,
- .cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_ALL,
- .otp_exe_param = 0,
- .channel_counters_freq_hz = 88000,
-@@ -190,6 +194,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
- .name = "qca6174 hw3.2 sdio",
- .patch_load_addr = QCA6174_HW_3_0_PATCH_LOAD_ADDR,
- .uart_pin = 19,
-+ .led_pin = 0,
- .otp_exe_param = 0,
- .channel_counters_freq_hz = 88000,
- .max_probe_resp_desc_thres = 0,
-@@ -226,6 +231,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
- .name = "qca6164 hw2.1",
- .patch_load_addr = QCA6174_HW_2_1_PATCH_LOAD_ADDR,
- .uart_pin = 6,
-+ .led_pin = 0,
- .otp_exe_param = 0,
- .channel_counters_freq_hz = 88000,
- .max_probe_resp_desc_thres = 0,
-@@ -266,6 +272,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
- .name = "qca6174 hw2.1",
- .patch_load_addr = QCA6174_HW_2_1_PATCH_LOAD_ADDR,
- .uart_pin = 6,
-+ .led_pin = 0,
- .otp_exe_param = 0,
- .channel_counters_freq_hz = 88000,
- .max_probe_resp_desc_thres = 0,
-@@ -306,6 +313,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
- .name = "qca6174 hw3.0",
- .patch_load_addr = QCA6174_HW_3_0_PATCH_LOAD_ADDR,
- .uart_pin = 6,
-+ .led_pin = 0,
- .otp_exe_param = 0,
- .channel_counters_freq_hz = 88000,
- .max_probe_resp_desc_thres = 0,
-@@ -346,6 +354,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
- .name = "qca6174 hw3.2",
- .patch_load_addr = QCA6174_HW_3_0_PATCH_LOAD_ADDR,
- .uart_pin = 6,
-+ .led_pin = 0,
- .otp_exe_param = 0,
- .channel_counters_freq_hz = 88000,
- .max_probe_resp_desc_thres = 0,
-@@ -390,6 +399,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
- .name = "qca99x0 hw2.0",
- .patch_load_addr = QCA99X0_HW_2_0_PATCH_LOAD_ADDR,
- .uart_pin = 7,
-+ .led_pin = 17,
- .otp_exe_param = 0x00000700,
- .continuous_frag_desc = true,
- .cck_rate_map_rev2 = true,
-@@ -436,6 +446,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
- .name = "qca9984/qca9994 hw1.0",
- .patch_load_addr = QCA9984_HW_1_0_PATCH_LOAD_ADDR,
- .uart_pin = 7,
-+ .led_pin = 17,
- .cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_EACH,
- .otp_exe_param = 0x00000700,
- .continuous_frag_desc = true,
-@@ -488,6 +499,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
- .name = "qca9888 hw2.0",
- .patch_load_addr = QCA9888_HW_2_0_PATCH_LOAD_ADDR,
- .uart_pin = 7,
-+ .led_pin = 17,
- .cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_EACH,
- .otp_exe_param = 0x00000700,
- .continuous_frag_desc = true,
-@@ -538,6 +550,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
- .name = "qca9377 hw1.0",
- .patch_load_addr = QCA9377_HW_1_0_PATCH_LOAD_ADDR,
- .uart_pin = 6,
-+ .led_pin = 0,
- .otp_exe_param = 0,
- .channel_counters_freq_hz = 88000,
- .max_probe_resp_desc_thres = 0,
-@@ -578,6 +591,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
- .name = "qca9377 hw1.1",
- .patch_load_addr = QCA9377_HW_1_0_PATCH_LOAD_ADDR,
- .uart_pin = 6,
-+ .led_pin = 0,
- .otp_exe_param = 0,
- .channel_counters_freq_hz = 88000,
- .max_probe_resp_desc_thres = 0,
-@@ -620,6 +634,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
- .name = "qca9377 hw1.1 sdio",
- .patch_load_addr = QCA9377_HW_1_0_PATCH_LOAD_ADDR,
- .uart_pin = 19,
-+ .led_pin = 0,
- .otp_exe_param = 0,
- .channel_counters_freq_hz = 88000,
- .max_probe_resp_desc_thres = 0,
-@@ -653,6 +668,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
- .name = "qca4019 hw1.0",
- .patch_load_addr = QCA4019_HW_1_0_PATCH_LOAD_ADDR,
- .uart_pin = 7,
-+ .led_pin = 0,
- .cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_EACH,
- .otp_exe_param = 0x0010000,
- .continuous_frag_desc = true,
-@@ -698,6 +714,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
- .dev_id = 0,
- .bus = ATH10K_BUS_SNOC,
- .name = "wcn3990 hw1.0",
-+ .led_pin = 0,
- .continuous_frag_desc = true,
- .tx_chain_mask = 0x7,
- .rx_chain_mask = 0x7,
-@@ -3224,6 +3241,10 @@ int ath10k_core_start(struct ath10k *ar, enum ath10k_firmware_mode mode,
- goto err_hif_stop;
- }
-
-+ status = ath10k_leds_start(ar);
-+ if (status)
-+ goto err_hif_stop;
-+
- return 0;
-
- err_hif_stop:
-@@ -3482,9 +3503,18 @@ static void ath10k_core_register_work(struct work_struct *work)
- goto err_spectral_destroy;
- }
-
-+ status = ath10k_leds_register(ar);
-+ if (status) {
-+ ath10k_err(ar, "could not register leds: %d\n",
-+ status);
-+ goto err_thermal_unregister;
-+ }
-+
- set_bit(ATH10K_FLAG_CORE_REGISTERED, &ar->dev_flags);
- return;
-
-+err_thermal_unregister:
-+ ath10k_thermal_unregister(ar);
- err_spectral_destroy:
- ath10k_spectral_destroy(ar);
- err_debug_destroy:
-@@ -3520,6 +3550,8 @@ void ath10k_core_unregister(struct ath10k *ar)
- if (!test_bit(ATH10K_FLAG_CORE_REGISTERED, &ar->dev_flags))
- return;
-
-+ ath10k_leds_unregister(ar);
-+
- ath10k_thermal_unregister(ar);
- /* Stop spectral before unregistering from mac80211 to remove the
- * relayfs debugfs file cleanly. Otherwise the parent debugfs tree
-diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
-index b00099f0b24e..446dca74f06a 100644
---- a/drivers/net/wireless/ath/ath10k/core.h
-+++ b/drivers/net/wireless/ath/ath10k/core.h
-@@ -15,6 +15,7 @@
- #include <linux/pci.h>
- #include <linux/uuid.h>
- #include <linux/time.h>
-+#include <linux/leds.h>
-
- #include "htt.h"
- #include "htc.h"
-@@ -1258,6 +1259,13 @@ struct ath10k {
- bool utf_monitor;
- } testmode;
-
-+ struct {
-+ struct gpio_led wifi_led;
-+ struct led_classdev cdev;
-+ char label[48];
-+ u32 gpio_state_pin;
-+ } leds;
-+
- struct {
- /* protected by data_lock */
- u32 rx_crc_err_drop;
-diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h
-index 48897e5eca06..442091c6dfd2 100644
---- a/drivers/net/wireless/ath/ath10k/hw.h
-+++ b/drivers/net/wireless/ath/ath10k/hw.h
-@@ -512,6 +512,7 @@ struct ath10k_hw_params {
- const char *name;
- u32 patch_load_addr;
- int uart_pin;
-+ int led_pin;
- u32 otp_exe_param;
-
- /* Type of hw cycle counter wraparound logic, for more info
-diff --git a/drivers/net/wireless/ath/ath10k/leds.c b/drivers/net/wireless/ath/ath10k/leds.c
-new file mode 100644
-index 000000000000..9b1d04eb4265
---- /dev/null
-+++ b/drivers/net/wireless/ath/ath10k/leds.c
-@@ -0,0 +1,90 @@
-+// SPDX-License-Identifier: ISC
-+/*
-+ * Copyright (c) 2005-2011 Atheros Communications Inc.
-+ * Copyright (c) 2011-2017 Qualcomm Atheros, Inc.
-+ * Copyright (c) 2018 Sebastian Gottschall <s.gottschall at dd-wrt.com>
-+ * Copyright (c) 2018 The Linux Foundation. All rights reserved.
-+ */
-+
-+#include <linux/leds.h>
-+
-+#include "core.h"
-+#include "wmi.h"
-+#include "wmi-ops.h"
-+
-+#include "leds.h"
-+
-+static int ath10k_leds_set_brightness_blocking(struct led_classdev *led_cdev,
-+ enum led_brightness brightness)
-+{
-+ struct ath10k *ar = container_of(led_cdev, struct ath10k,
-+ leds.cdev);
-+ struct gpio_led *led = &ar->leds.wifi_led;
-+
-+ mutex_lock(&ar->conf_mutex);
-+
-+ if (ar->state != ATH10K_STATE_ON)
-+ goto out;
-+
-+ ar->leds.gpio_state_pin = (brightness != LED_OFF) ^ led->active_low;
-+ ath10k_wmi_gpio_output(ar, led->gpio, ar->leds.gpio_state_pin);
-+
-+out:
-+ mutex_unlock(&ar->conf_mutex);
-+
-+ return 0;
-+}
-+
-+int ath10k_leds_start(struct ath10k *ar)
-+{
-+ if (ar->hw_params.led_pin == 0)
-+ /* leds not supported */
-+ return 0;
-+
-+ /* under some circumstances, the gpio pin gets reconfigured
-+ * to default state by the firmware, so we need to
-+ * reconfigure it this behaviour has only ben seen on
-+ * QCA9984 and QCA99XX devices so far
-+ */
-+ ath10k_wmi_gpio_config(ar, ar->hw_params.led_pin, 0,
-+ WMI_GPIO_PULL_NONE, WMI_GPIO_INTTYPE_DISABLE);
-+ ath10k_wmi_gpio_output(ar, ar->hw_params.led_pin, 1);
-+
-+ return 0;
-+}
-+
-+int ath10k_leds_register(struct ath10k *ar)
-+{
-+ int ret;
-+
-+ if (ar->hw_params.led_pin == 0)
-+ /* leds not supported */
-+ return 0;
-+
-+ snprintf(ar->leds.label, sizeof(ar->leds.label), "ath10k-%s",
-+ wiphy_name(ar->hw->wiphy));
-+ ar->leds.wifi_led.active_low = 1;
-+ ar->leds.wifi_led.gpio = ar->hw_params.led_pin;
-+ ar->leds.wifi_led.name = ar->leds.label;
-+ ar->leds.wifi_led.default_state = LEDS_GPIO_DEFSTATE_KEEP;
-+
-+ ar->leds.cdev.name = ar->leds.label;
-+ ar->leds.cdev.brightness_set_blocking = ath10k_leds_set_brightness_blocking;
-+ ar->leds.cdev.default_trigger = ar->leds.wifi_led.default_trigger;
-+
-+ ret = led_classdev_register(wiphy_dev(ar->hw->wiphy), &ar->leds.cdev);
-+ if (ret)
-+ return ret;
-+
-+ return 0;
-+}
-+
-+void ath10k_leds_unregister(struct ath10k *ar)
-+{
-+ if (ar->hw_params.led_pin == 0)
-+ /* leds not supported */
-+ return;
-+
-+ led_classdev_unregister(&ar->leds.cdev);
-+}
-+
-diff --git a/drivers/net/wireless/ath/ath10k/leds.h b/drivers/net/wireless/ath/ath10k/leds.h
-new file mode 100644
-index 000000000000..56325b0875e5
---- /dev/null
-+++ b/drivers/net/wireless/ath/ath10k/leds.h
-@@ -0,0 +1,34 @@
-+/* SPDX-License-Identifier: ISC */
-+/*
-+ * Copyright (c) 2005-2011 Atheros Communications Inc.
-+ * Copyright (c) 2011-2017 Qualcomm Atheros, Inc.
-+ * Copyright (c) 2018 Sebastian Gottschall <s.gottschall at dd-wrt.com>
-+ * Copyright (c) 2018 The Linux Foundation. All rights reserved.
-+ */
-+
-+#ifndef _LEDS_H_
-+#define _LEDS_H_
-+
-+#include "core.h"
-+
-+#ifdef CONFIG_ATH10K_LEDS
-+void ath10k_leds_unregister(struct ath10k *ar);
-+int ath10k_leds_start(struct ath10k *ar);
-+int ath10k_leds_register(struct ath10k *ar);
-+#else
-+static inline void ath10k_leds_unregister(struct ath10k *ar)
-+{
-+}
-+
-+static inline int ath10k_leds_start(struct ath10k *ar)
-+{
-+ return 0;
-+}
-+
-+static inline int ath10k_leds_register(struct ath10k *ar)
-+{
-+ return 0;
-+}
-+
-+#endif
-+#endif /* _LEDS_H_ */
-diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
-index e322b528baaf..3bf67b2ecd6d 100644
---- a/drivers/net/wireless/ath/ath10k/mac.c
-+++ b/drivers/net/wireless/ath/ath10k/mac.c
-@@ -25,6 +25,7 @@
- #include "wmi-tlv.h"
- #include "wmi-ops.h"
- #include "wow.h"
-+#include "leds.h"
-
- /*********/
- /* Rates */
-diff --git a/drivers/net/wireless/ath/ath10k/wmi-ops.h b/drivers/net/wireless/ath/ath10k/wmi-ops.h
-index aa57d807491c..f3f6b5954b27 100644
---- a/drivers/net/wireless/ath/ath10k/wmi-ops.h
-+++ b/drivers/net/wireless/ath/ath10k/wmi-ops.h
-@@ -226,7 +226,10 @@ struct wmi_ops {
- const struct wmi_bb_timing_cfg_arg *arg);
- struct sk_buff *(*gen_per_peer_per_tid_cfg)(struct ath10k *ar,
- const struct wmi_per_peer_per_tid_cfg_arg *arg);
-+ struct sk_buff *(*gen_gpio_config)(struct ath10k *ar, u32 gpio_num,
-+ u32 input, u32 pull_type, u32 intr_mode);
-
-+ struct sk_buff *(*gen_gpio_output)(struct ath10k *ar, u32 gpio_num, u32 set);
- };
-
- int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, u32 cmd_id);
-@@ -1122,6 +1125,35 @@ ath10k_wmi_force_fw_hang(struct ath10k *ar,
- return ath10k_wmi_cmd_send(ar, skb, ar->wmi.cmd->force_fw_hang_cmdid);
- }
-
-+static inline int ath10k_wmi_gpio_config(struct ath10k *ar, u32 gpio_num,
-+ u32 input, u32 pull_type, u32 intr_mode)
-+{
-+ struct sk_buff *skb;
-+
-+ if (!ar->wmi.ops->gen_gpio_config)
-+ return -EOPNOTSUPP;
-+
-+ skb = ar->wmi.ops->gen_gpio_config(ar, gpio_num, input, pull_type, intr_mode);
-+ if (IS_ERR(skb))
-+ return PTR_ERR(skb);
-+
-+ return ath10k_wmi_cmd_send(ar, skb, ar->wmi.cmd->gpio_config_cmdid);
-+}
-+
-+static inline int ath10k_wmi_gpio_output(struct ath10k *ar, u32 gpio_num, u32 set)
-+{
-+ struct sk_buff *skb;
-+
-+ if (!ar->wmi.ops->gen_gpio_config)
-+ return -EOPNOTSUPP;
-+
-+ skb = ar->wmi.ops->gen_gpio_output(ar, gpio_num, set);
-+ if (IS_ERR(skb))
-+ return PTR_ERR(skb);
-+
-+ return ath10k_wmi_cmd_send(ar, skb, ar->wmi.cmd->gpio_output_cmdid);
-+}
-+
- static inline int
- ath10k_wmi_dbglog_cfg(struct ath10k *ar, u64 module_enable, u32 log_level)
- {
-diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
-index aed97fd121ba..dbaf26d6a7a6 100644
---- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c
-+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
-@@ -4606,6 +4606,8 @@ static const struct wmi_ops wmi_tlv_ops = {
- .gen_echo = ath10k_wmi_tlv_op_gen_echo,
- .gen_vdev_spectral_conf = ath10k_wmi_tlv_op_gen_vdev_spectral_conf,
- .gen_vdev_spectral_enable = ath10k_wmi_tlv_op_gen_vdev_spectral_enable,
-+ /* .gen_gpio_config not implemented */
-+ /* .gen_gpio_output not implemented */
- };
-
- static const struct wmi_peer_flags_map wmi_tlv_peer_flags_map = {
-diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
-index 80d255aaff1b..fe2344598364 100644
---- a/drivers/net/wireless/ath/ath10k/wmi.c
-+++ b/drivers/net/wireless/ath/ath10k/wmi.c
-@@ -7493,6 +7493,49 @@ ath10k_wmi_op_gen_peer_set_param(struct ath10k *ar, u32 vdev_id,
- return skb;
- }
-
-+static struct sk_buff *ath10k_wmi_op_gen_gpio_config(struct ath10k *ar,
-+ u32 gpio_num, u32 input,
-+ u32 pull_type, u32 intr_mode)
-+{
-+ struct wmi_gpio_config_cmd *cmd;
-+ struct sk_buff *skb;
-+
-+ skb = ath10k_wmi_alloc_skb(ar, sizeof(*cmd));
-+ if (!skb)
-+ return ERR_PTR(-ENOMEM);
-+
-+ cmd = (struct wmi_gpio_config_cmd *)skb->data;
-+ cmd->pull_type = __cpu_to_le32(pull_type);
-+ cmd->gpio_num = __cpu_to_le32(gpio_num);
-+ cmd->input = __cpu_to_le32(input);
-+ cmd->intr_mode = __cpu_to_le32(intr_mode);
-+
-+ ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi gpio_config gpio_num 0x%08x input 0x%08x pull_type 0x%08x intr_mode 0x%08x\n",
-+ gpio_num, input, pull_type, intr_mode);
-+
-+ return skb;
-+}
-+
-+static struct sk_buff *ath10k_wmi_op_gen_gpio_output(struct ath10k *ar,
-+ u32 gpio_num, u32 set)
-+{
-+ struct wmi_gpio_output_cmd *cmd;
-+ struct sk_buff *skb;
-+
-+ skb = ath10k_wmi_alloc_skb(ar, sizeof(*cmd));
-+ if (!skb)
-+ return ERR_PTR(-ENOMEM);
-+
-+ cmd = (struct wmi_gpio_output_cmd *)skb->data;
-+ cmd->gpio_num = __cpu_to_le32(gpio_num);
-+ cmd->set = __cpu_to_le32(set);
-+
-+ ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi gpio_output gpio_num 0x%08x set 0x%08x\n",
-+ gpio_num, set);
-+
-+ return skb;
-+}
-+
- static struct sk_buff *
- ath10k_wmi_op_gen_set_psmode(struct ath10k *ar, u32 vdev_id,
- enum wmi_sta_ps_mode psmode)
-@@ -9157,6 +9200,9 @@ static const struct wmi_ops wmi_ops = {
- .fw_stats_fill = ath10k_wmi_main_op_fw_stats_fill,
- .get_vdev_subtype = ath10k_wmi_op_get_vdev_subtype,
- .gen_echo = ath10k_wmi_op_gen_echo,
-+ .gen_gpio_config = ath10k_wmi_op_gen_gpio_config,
-+ .gen_gpio_output = ath10k_wmi_op_gen_gpio_output,
-+
- /* .gen_bcn_tmpl not implemented */
- /* .gen_prb_tmpl not implemented */
- /* .gen_p2p_go_bcn_ie not implemented */
-@@ -9227,6 +9273,8 @@ static const struct wmi_ops wmi_10_1_ops = {
- .fw_stats_fill = ath10k_wmi_10x_op_fw_stats_fill,
- .get_vdev_subtype = ath10k_wmi_op_get_vdev_subtype,
- .gen_echo = ath10k_wmi_op_gen_echo,
-+ .gen_gpio_config = ath10k_wmi_op_gen_gpio_config,
-+ .gen_gpio_output = ath10k_wmi_op_gen_gpio_output,
- /* .gen_bcn_tmpl not implemented */
- /* .gen_prb_tmpl not implemented */
- /* .gen_p2p_go_bcn_ie not implemented */
-@@ -9299,6 +9347,8 @@ static const struct wmi_ops wmi_10_2_ops = {
- .gen_delba_send = ath10k_wmi_op_gen_delba_send,
- .fw_stats_fill = ath10k_wmi_10x_op_fw_stats_fill,
- .get_vdev_subtype = ath10k_wmi_op_get_vdev_subtype,
-+ .gen_gpio_config = ath10k_wmi_op_gen_gpio_config,
-+ .gen_gpio_output = ath10k_wmi_op_gen_gpio_output,
- /* .gen_pdev_enable_adaptive_cca not implemented */
- };
-
-@@ -9370,6 +9420,8 @@ static const struct wmi_ops wmi_10_2_4_ops = {
- ath10k_wmi_op_gen_pdev_enable_adaptive_cca,
- .get_vdev_subtype = ath10k_wmi_10_2_4_op_get_vdev_subtype,
- .gen_bb_timing = ath10k_wmi_10_2_4_op_gen_bb_timing,
-+ .gen_gpio_config = ath10k_wmi_op_gen_gpio_config,
-+ .gen_gpio_output = ath10k_wmi_op_gen_gpio_output,
- /* .gen_bcn_tmpl not implemented */
- /* .gen_prb_tmpl not implemented */
- /* .gen_p2p_go_bcn_ie not implemented */
-@@ -9451,6 +9503,8 @@ static const struct wmi_ops wmi_10_4_ops = {
- .gen_pdev_bss_chan_info_req = ath10k_wmi_10_2_op_gen_pdev_bss_chan_info,
- .gen_echo = ath10k_wmi_op_gen_echo,
- .gen_pdev_get_tpc_config = ath10k_wmi_10_2_4_op_gen_pdev_get_tpc_config,
-+ .gen_gpio_config = ath10k_wmi_op_gen_gpio_config,
-+ .gen_gpio_output = ath10k_wmi_op_gen_gpio_output,
- };
-
- int ath10k_wmi_attach(struct ath10k *ar)
-diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
-index 2379501225a4..0faefc0a9a40 100644
---- a/drivers/net/wireless/ath/ath10k/wmi.h
-+++ b/drivers/net/wireless/ath/ath10k/wmi.h
-@@ -3034,6 +3034,41 @@ enum wmi_10_4_feature_mask {
-
- };
-
-+/* WMI_GPIO_CONFIG_CMDID */
-+enum {
-+ WMI_GPIO_PULL_NONE,
-+ WMI_GPIO_PULL_UP,
-+ WMI_GPIO_PULL_DOWN,
-+};
-+
-+enum {
-+ WMI_GPIO_INTTYPE_DISABLE,
-+ WMI_GPIO_INTTYPE_RISING_EDGE,
-+ WMI_GPIO_INTTYPE_FALLING_EDGE,
-+ WMI_GPIO_INTTYPE_BOTH_EDGE,
-+ WMI_GPIO_INTTYPE_LEVEL_LOW,
-+ WMI_GPIO_INTTYPE_LEVEL_HIGH
-+};
-+
-+/* WMI_GPIO_CONFIG_CMDID */
-+struct wmi_gpio_config_cmd {
-+ __le32 gpio_num; /* GPIO number to be setup */
-+ __le32 input; /* 0 - Output/ 1 - Input */
-+ __le32 pull_type; /* Pull type defined above */
-+ __le32 intr_mode; /* Interrupt mode defined above (Input) */
-+} __packed;
-+
-+/* WMI_GPIO_OUTPUT_CMDID */
-+struct wmi_gpio_output_cmd {
-+ __le32 gpio_num; /* GPIO number to be setup */
-+ __le32 set; /* Set the GPIO pin*/
-+} __packed;
-+
-+/* WMI_GPIO_INPUT_EVENTID */
-+struct wmi_gpio_input_event {
-+ __le32 gpio_num; /* GPIO number which changed state */
-+} __packed;
-+
- struct wmi_ext_resource_config_10_4_cmd {
- /* contains enum wmi_host_platform_type */
- __le32 host_platform_config;
---
-2.43.0
-
diff --git a/package/kernel/mac80211/patches/ath10k/974-wifi-ath10k-add-LED-and-GPIO-controlling-support-for.patch b/package/kernel/mac80211/patches/ath10k/974-ath10k_add-LED-and-GPIO-controlling-support-for-various-chipsets.patch
similarity index 70%
rename from package/kernel/mac80211/patches/ath10k/974-wifi-ath10k-add-LED-and-GPIO-controlling-support-for.patch
rename to package/kernel/mac80211/patches/ath10k/974-ath10k_add-LED-and-GPIO-controlling-support-for-various-chipsets.patch
index 05e3b2a28d..2465470a57 100644
--- a/package/kernel/mac80211/patches/ath10k/974-wifi-ath10k-add-LED-and-GPIO-controlling-support-for.patch
+++ b/package/kernel/mac80211/patches/ath10k/974-ath10k_add-LED-and-GPIO-controlling-support-for-various-chipsets.patch
@@ -1,52 +1,103 @@
-From 8e1debd82466a3fe711784ab37e6b54e56011267 Mon Sep 17 00:00:00 2001
-From: Sebastian Gottschall <s.gottschall at dd-wrt.com>
-Date: Mon, 13 May 2024 17:22:25 +0300
-Subject: [PATCH] wifi: ath10k: add LED and GPIO controlling support for
- various chipsets
+From: Sebastian Gottschall <s.gottschall at newmedia-net.de>
+
+Adds LED and GPIO Control support for 988x, 9887, 9888, 99x0, 9984 based
+chipsets with on chipset connected led's using WMI Firmware API. The LED
+device will get available named as "ath10k-phyX" at sysfs and can be controlled
+with various triggers. adds also debugfs interface for gpio control.
+
+This patch is specific for OpenWRt base, as is use old backported package
+with old wireless source. Support for QCA9984 is removed and a simbol
+is added to local-simbol file to export the actually compile the code
+with the ATH10K_LEDS simbol.
-Adds LED and GPIO Control support for 988x, 9887, 9888, 99x0, 9984
-based chipsets with on chipset connected led's using WMI Firmware API.
-The LED device will get available named as "ath10k-phyX" at sysfs and
-can be controlled with various triggers.
-Adds also debugfs interface for gpio control.
Signed-off-by: Sebastian Gottschall <s.gottschall at dd-wrt.com>
Reviewed-by: Steve deRosier <derosier at cal-sierra.com>
[kvalo: major reorg and cleanup]
Signed-off-by: Kalle Valo <kvalo at codeaurora.org>
-[ansuel: rebase and small cleanup]
-Signed-off-by: Christian Marangi <ansuelsmth at gmail.com>
-Tested-by: Stefan Lippers-Hollmann <s.l-h at gmx.de>
-Signed-off-by: Kalle Valo <quic_kvalo at quicinc.com>
-Link: https://msgid.link/20230611080505.17393-1-ansuelsmth@gmail.com
+Signed-off-by: Ansuel Smith <ansuelsmth at gmail.com>
---
- drivers/net/wireless/ath/ath10k/Kconfig | 6 ++
- drivers/net/wireless/ath/ath10k/Makefile | 1 +
- drivers/net/wireless/ath/ath10k/core.c | 32 ++++++++
- drivers/net/wireless/ath/ath10k/core.h | 8 ++
- drivers/net/wireless/ath/ath10k/hw.h | 1 +
- drivers/net/wireless/ath/ath10k/leds.c | 90 +++++++++++++++++++++++
- drivers/net/wireless/ath/ath10k/leds.h | 34 +++++++++
- drivers/net/wireless/ath/ath10k/mac.c | 1 +
- drivers/net/wireless/ath/ath10k/wmi-ops.h | 32 ++++++++
- drivers/net/wireless/ath/ath10k/wmi-tlv.c | 2 +
- drivers/net/wireless/ath/ath10k/wmi.c | 54 ++++++++++++++
- drivers/net/wireless/ath/ath10k/wmi.h | 35 +++++++++
- 12 files changed, 296 insertions(+)
+
+v13:
+
+* only compile tested!
+
+* fix all checkpatch warnings
+
+* fix commit log
+
+* sizeof(struct ath10k_gpiocontrol) -> sizeof(*gpio)
+
+* unsigned -> unsigned int
+
+* remove GPIOLIB code, that should be added in a separate patch
+
+* rename gpio.c to leds.c
+
+* add leds.h
+
+* rename some functions:
+
+ ath10k_attach_led() -> ath10k_leds_register()
+ ath10k_unregister_led() -> ath10k_leds_unregister()
+ ath10k_reset_led_pin() -> ath10k_leds_start()
+
+* call ath10k_leds_unregister() before ath10k_thermal_unregister() to preserve ordering
+
+* call ath10k_leds_start() only from ath10k_core_start() and not from mac.c
+
+* rename struct ath10k_gpiocontrol as anonymous function under struct
+ ath10k::leds, no need for memory allocation
+
+* merge ath10k_add_led() to ath10k_attach_led(), which is it's only caller
+
+* remove #if IS_ENABLED() checks from most of places, memory savings from those were not worth it
+
+* Kconfig help text improvement and move it lower in the menu, also don't enable it by default
+
+* switch to set_brightness_blocking() so that the callback can sleep,
+ then no need to use ath10k_wmi_cmd_send_nowait() and can take mutex
+ to access ar->state
+
+* don't touch ath10k_wmi_pdev_get_temperature()
+
+* as QCA6174/QCA9377 are not (yet) supported don't add the command to WMI-TLV interface
+
+* remove debugfs interface, that should be added in another patch
+
+* cleanup includes
+
+
+ drivers/net/wireless/ath/ath10k/Kconfig | 10 +++
+ drivers/net/wireless/ath/ath10k/Makefile | 1 +
+ drivers/net/wireless/ath/ath10k/core.c | 22 +++++++
+ drivers/net/wireless/ath/ath10k/core.h | 9 ++-
+ drivers/net/wireless/ath/ath10k/hw.h | 1 +
+ drivers/net/wireless/ath/ath10k/leds.c | 103 ++++++++++++++++++++++++++++++
+ drivers/net/wireless/ath/ath10k/leds.h | 45 +++++++++++++
+ drivers/net/wireless/ath/ath10k/mac.c | 1 +
+ drivers/net/wireless/ath/ath10k/wmi-ops.h | 32 ++++++++++
+ drivers/net/wireless/ath/ath10k/wmi-tlv.c | 2 +
+ drivers/net/wireless/ath/ath10k/wmi.c | 54 ++++++++++++++++
+ drivers/net/wireless/ath/ath10k/wmi.h | 35 ++++++++++
+ 12 files changed, 314 insertions(+), 1 deletion(-)
create mode 100644 drivers/net/wireless/ath/ath10k/leds.c
create mode 100644 drivers/net/wireless/ath/ath10k/leds.h
-
--- a/drivers/net/wireless/ath/ath10k/Kconfig
+++ b/drivers/net/wireless/ath/ath10k/Kconfig
-@@ -72,6 +72,12 @@ config ATH10K_DEBUGFS
+@@ -72,6 +72,16 @@ config ATH10K_DEBUGFS
If unsure, say Y to make it easier to debug problems.
+config ATH10K_LEDS
-+ bool
++ bool "Atheros ath10k LED support"
+ depends on ATH10K
-+ depends on LEDS_CLASS=y || LEDS_CLASS=MAC80211
++ select MAC80211_LEDS
++ select LEDS_CLASS
++ select NEW_LEDS
+ default y
++ ---help---
++ This option is necessary, if you want LED support for chipset connected led pins. If unsure, say N.
+
config ATH10K_SPECTRAL
bool "Atheros ath10k spectral scan support"
@@ -81,135 +132,47 @@ Link: https://msgid.link/20230611080505.17393-1-ansuelsmth@gmail.com
unsigned int ath10k_debug_mask;
EXPORT_SYMBOL(ath10k_debug_mask);
-@@ -67,6 +68,7 @@ static const struct ath10k_hw_params ath
+@@ -65,6 +66,7 @@ static const struct ath10k_hw_params ath
+ .dev_id = QCA988X_2_0_DEVICE_ID,
+ .bus = ATH10K_BUS_PCI,
.name = "qca988x hw2.0",
- .patch_load_addr = QCA988X_HW_2_0_PATCH_LOAD_ADDR,
- .uart_pin = 7,
+ .led_pin = 1,
- .cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_ALL,
- .otp_exe_param = 0,
- .channel_counters_freq_hz = 88000,
-@@ -107,6 +109,7 @@ static const struct ath10k_hw_params ath
- .name = "qca988x hw2.0 ubiquiti",
.patch_load_addr = QCA988X_HW_2_0_PATCH_LOAD_ADDR,
.uart_pin = 7,
-+ .led_pin = 0,
.cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_ALL,
- .otp_exe_param = 0,
- .channel_counters_freq_hz = 88000,
-@@ -148,6 +151,7 @@ static const struct ath10k_hw_params ath
+@@ -146,6 +148,7 @@ static const struct ath10k_hw_params ath
+ .dev_id = QCA9887_1_0_DEVICE_ID,
+ .bus = ATH10K_BUS_PCI,
.name = "qca9887 hw1.0",
++ .led_pin = 1,
.patch_load_addr = QCA9887_HW_1_0_PATCH_LOAD_ADDR,
.uart_pin = 7,
-+ .led_pin = 1,
.cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_ALL,
- .otp_exe_param = 0,
- .channel_counters_freq_hz = 88000,
-@@ -189,6 +193,7 @@ static const struct ath10k_hw_params ath
- .name = "qca6174 hw3.2 sdio",
- .patch_load_addr = QCA6174_HW_3_0_PATCH_LOAD_ADDR,
- .uart_pin = 19,
-+ .led_pin = 0,
- .otp_exe_param = 0,
- .channel_counters_freq_hz = 88000,
- .max_probe_resp_desc_thres = 0,
-@@ -225,6 +230,7 @@ static const struct ath10k_hw_params ath
- .name = "qca6164 hw2.1",
- .patch_load_addr = QCA6174_HW_2_1_PATCH_LOAD_ADDR,
- .uart_pin = 6,
-+ .led_pin = 0,
- .otp_exe_param = 0,
- .channel_counters_freq_hz = 88000,
- .max_probe_resp_desc_thres = 0,
-@@ -265,6 +271,7 @@ static const struct ath10k_hw_params ath
- .name = "qca6174 hw2.1",
- .patch_load_addr = QCA6174_HW_2_1_PATCH_LOAD_ADDR,
- .uart_pin = 6,
-+ .led_pin = 0,
- .otp_exe_param = 0,
- .channel_counters_freq_hz = 88000,
- .max_probe_resp_desc_thres = 0,
-@@ -305,6 +312,7 @@ static const struct ath10k_hw_params ath
- .name = "qca6174 hw3.0",
- .patch_load_addr = QCA6174_HW_3_0_PATCH_LOAD_ADDR,
- .uart_pin = 6,
-+ .led_pin = 0,
- .otp_exe_param = 0,
- .channel_counters_freq_hz = 88000,
- .max_probe_resp_desc_thres = 0,
-@@ -345,6 +353,7 @@ static const struct ath10k_hw_params ath
- .name = "qca6174 hw3.2",
- .patch_load_addr = QCA6174_HW_3_0_PATCH_LOAD_ADDR,
- .uart_pin = 6,
-+ .led_pin = 0,
- .otp_exe_param = 0,
- .channel_counters_freq_hz = 88000,
- .max_probe_resp_desc_thres = 0,
-@@ -389,6 +398,7 @@ static const struct ath10k_hw_params ath
+@@ -387,6 +390,7 @@ static const struct ath10k_hw_params ath
+ .dev_id = QCA99X0_2_0_DEVICE_ID,
+ .bus = ATH10K_BUS_PCI,
.name = "qca99x0 hw2.0",
++ .led_pin = 17,
.patch_load_addr = QCA99X0_HW_2_0_PATCH_LOAD_ADDR,
.uart_pin = 7,
-+ .led_pin = 17,
.otp_exe_param = 0x00000700,
- .continuous_frag_desc = true,
- .cck_rate_map_rev2 = true,
-@@ -435,6 +445,7 @@ static const struct ath10k_hw_params ath
+@@ -433,6 +437,7 @@ static const struct ath10k_hw_params ath
+ .dev_id = QCA9984_1_0_DEVICE_ID,
+ .bus = ATH10K_BUS_PCI,
.name = "qca9984/qca9994 hw1.0",
++ .led_pin = 17,
.patch_load_addr = QCA9984_HW_1_0_PATCH_LOAD_ADDR,
.uart_pin = 7,
-+ .led_pin = 17,
.cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_EACH,
- .otp_exe_param = 0x00000700,
- .continuous_frag_desc = true,
-@@ -488,6 +499,7 @@ static const struct ath10k_hw_params ath
+@@ -486,6 +491,7 @@ static const struct ath10k_hw_params ath
+ .dev_id = QCA9888_2_0_DEVICE_ID,
+ .bus = ATH10K_BUS_PCI,
.name = "qca9888 hw2.0",
- .patch_load_addr = QCA9888_HW_2_0_PATCH_LOAD_ADDR,
- .uart_pin = 7,
+ .led_pin = 17,
- .cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_EACH,
- .otp_exe_param = 0x00000700,
- .continuous_frag_desc = true,
-@@ -538,6 +550,7 @@ static const struct ath10k_hw_params ath
- .name = "qca9377 hw1.0",
- .patch_load_addr = QCA9377_HW_1_0_PATCH_LOAD_ADDR,
- .uart_pin = 6,
-+ .led_pin = 0,
- .otp_exe_param = 0,
- .channel_counters_freq_hz = 88000,
- .max_probe_resp_desc_thres = 0,
-@@ -578,6 +591,7 @@ static const struct ath10k_hw_params ath
- .name = "qca9377 hw1.1",
- .patch_load_addr = QCA9377_HW_1_0_PATCH_LOAD_ADDR,
- .uart_pin = 6,
-+ .led_pin = 0,
- .otp_exe_param = 0,
- .channel_counters_freq_hz = 88000,
- .max_probe_resp_desc_thres = 0,
-@@ -620,6 +634,7 @@ static const struct ath10k_hw_params ath
- .name = "qca9377 hw1.1 sdio",
- .patch_load_addr = QCA9377_HW_1_0_PATCH_LOAD_ADDR,
- .uart_pin = 19,
-+ .led_pin = 0,
- .otp_exe_param = 0,
- .channel_counters_freq_hz = 88000,
- .max_probe_resp_desc_thres = 0,
-@@ -653,6 +668,7 @@ static const struct ath10k_hw_params ath
- .name = "qca4019 hw1.0",
- .patch_load_addr = QCA4019_HW_1_0_PATCH_LOAD_ADDR,
+ .patch_load_addr = QCA9888_HW_2_0_PATCH_LOAD_ADDR,
.uart_pin = 7,
-+ .led_pin = 0,
.cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_EACH,
- .otp_exe_param = 0x0010000,
- .continuous_frag_desc = true,
-@@ -698,6 +714,7 @@ static const struct ath10k_hw_params ath
- .dev_id = 0,
- .bus = ATH10K_BUS_SNOC,
- .name = "wcn3990 hw1.0",
-+ .led_pin = 0,
- .continuous_frag_desc = true,
- .tx_chain_mask = 0x7,
- .rx_chain_mask = 0x7,
-@@ -3222,6 +3239,10 @@ int ath10k_core_start(struct ath10k *ar,
+@@ -3222,6 +3228,10 @@ int ath10k_core_start(struct ath10k *ar,
goto err_hif_stop;
}
@@ -220,7 +183,7 @@ Link: https://msgid.link/20230611080505.17393-1-ansuelsmth@gmail.com
return 0;
err_hif_stop:
-@@ -3480,9 +3501,18 @@ static void ath10k_core_register_work(st
+@@ -3480,9 +3490,18 @@ static void ath10k_core_register_work(st
goto err_spectral_destroy;
}
@@ -239,7 +202,7 @@ Link: https://msgid.link/20230611080505.17393-1-ansuelsmth@gmail.com
err_spectral_destroy:
ath10k_spectral_destroy(ar);
err_debug_destroy:
-@@ -3528,6 +3558,8 @@ void ath10k_core_unregister(struct ath10
+@@ -3528,6 +3547,8 @@ void ath10k_core_unregister(struct ath10
if (!test_bit(ATH10K_FLAG_CORE_REGISTERED, &ar->dev_flags))
return;
@@ -284,13 +247,24 @@ Link: https://msgid.link/20230611080505.17393-1-ansuelsmth@gmail.com
/* Type of hw cycle counter wraparound logic, for more info
--- /dev/null
+++ b/drivers/net/wireless/ath/ath10k/leds.c
-@@ -0,0 +1,90 @@
-+// SPDX-License-Identifier: ISC
+@@ -0,0 +1,103 @@
+/*
+ * Copyright (c) 2005-2011 Atheros Communications Inc.
+ * Copyright (c) 2011-2017 Qualcomm Atheros, Inc.
+ * Copyright (c) 2018 Sebastian Gottschall <s.gottschall at dd-wrt.com>
-+ * Copyright (c) 2018 The Linux Foundation. All rights reserved.
++ * Copyright (c) 2018, The Linux Foundation. All rights reserved.
++ *
++ * Permission to use, copy, modify, and/or distribute this software for any
++ * purpose with or without fee is hereby granted, provided that the above
++ * copyright notice and this permission notice appear in all copies.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
++ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
++ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
++ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
++ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
++ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
++ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/leds.h>
@@ -357,6 +331,8 @@ Link: https://msgid.link/20230611080505.17393-1-ansuelsmth@gmail.com
+
+ ar->leds.cdev.name = ar->leds.label;
+ ar->leds.cdev.brightness_set_blocking = ath10k_leds_set_brightness_blocking;
++
++ /* FIXME: this assignment doesn't make sense as it's NULL, remove it? */
+ ar->leds.cdev.default_trigger = ar->leds.wifi_led.default_trigger;
+
+ ret = led_classdev_register(wiphy_dev(ar->hw->wiphy), &ar->leds.cdev);
@@ -377,15 +353,22 @@ Link: https://msgid.link/20230611080505.17393-1-ansuelsmth@gmail.com
+
--- /dev/null
+++ b/drivers/net/wireless/ath/ath10k/leds.h
-@@ -0,0 +1,34 @@
-+/* SPDX-License-Identifier: ISC */
+@@ -0,0 +1,41 @@
+/*
-+ * Copyright (c) 2005-2011 Atheros Communications Inc.
-+ * Copyright (c) 2011-2017 Qualcomm Atheros, Inc.
-+ * Copyright (c) 2018 Sebastian Gottschall <s.gottschall at dd-wrt.com>
-+ * Copyright (c) 2018 The Linux Foundation. All rights reserved.
++ * Copyright (c) 2018, The Linux Foundation. All rights reserved.
++ *
++ * Permission to use, copy, modify, and/or distribute this software for any
++ * purpose with or without fee is hereby granted, provided that the above
++ * copyright notice and this permission notice appear in all copies.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
++ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
++ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
++ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
++ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
++ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
++ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
-+
+#ifndef _LEDS_H_
+#define _LEDS_H_
+
@@ -586,7 +569,7 @@ Link: https://msgid.link/20230611080505.17393-1-ansuelsmth@gmail.com
};
-+/* WMI_GPIO_CPTCFG_CMDID */
++/* WMI_GPIO_CONFIG_CMDID */
+enum {
+ WMI_GPIO_PULL_NONE,
+ WMI_GPIO_PULL_UP,
@@ -602,7 +585,7 @@ Link: https://msgid.link/20230611080505.17393-1-ansuelsmth@gmail.com
+ WMI_GPIO_INTTYPE_LEVEL_HIGH
+};
+
-+/* WMI_GPIO_CPTCFG_CMDID */
++/* WMI_GPIO_CONFIG_CMDID */
+struct wmi_gpio_config_cmd {
+ __le32 gpio_num; /* GPIO number to be setup */
+ __le32 input; /* 0 - Output/ 1 - Input */
diff --git a/package/kernel/mac80211/patches/ath10k/975-ath10k-use-tpt-trigger-by-default.patch b/package/kernel/mac80211/patches/ath10k/975-ath10k-use-tpt-trigger-by-default.patch
index 2e598199c4..95bd48f923 100644
--- a/package/kernel/mac80211/patches/ath10k/975-ath10k-use-tpt-trigger-by-default.patch
+++ b/package/kernel/mac80211/patches/ath10k/975-ath10k-use-tpt-trigger-by-default.patch
@@ -29,10 +29,12 @@ Signed-off-by: Mathias Kresin <dev at kresin.me>
};
--- a/drivers/net/wireless/ath/ath10k/leds.c
+++ b/drivers/net/wireless/ath/ath10k/leds.c
-@@ -70,7 +70,7 @@ int ath10k_leds_register(struct ath10k *
+@@ -81,9 +81,7 @@ int ath10k_leds_register(struct ath10k *
ar->leds.cdev.name = ar->leds.label;
ar->leds.cdev.brightness_set_blocking = ath10k_leds_set_brightness_blocking;
+-
+- /* FIXME: this assignment doesn't make sense as it's NULL, remove it? */
- ar->leds.cdev.default_trigger = ar->leds.wifi_led.default_trigger;
+ ar->leds.cdev.default_trigger = ar->led_default_trigger;
diff --git a/package/kernel/mac80211/patches/ath10k/984-ath10k-Try-to-get-mac-address-from-dts.patch b/package/kernel/mac80211/patches/ath10k/984-ath10k-Try-to-get-mac-address-from-dts.patch
index 6439ff9803..cfa0f9108a 100644
--- a/package/kernel/mac80211/patches/ath10k/984-ath10k-Try-to-get-mac-address-from-dts.patch
+++ b/package/kernel/mac80211/patches/ath10k/984-ath10k-Try-to-get-mac-address-from-dts.patch
@@ -26,7 +26,7 @@ Signed-off-by: Ansuel Smith <ansuelsmth at gmail.com>
#include <linux/property.h>
#include <linux/dmi.h>
#include <linux/ctype.h>
-@@ -3409,6 +3410,8 @@ static int ath10k_core_probe_fw(struct a
+@@ -3398,6 +3399,8 @@ static int ath10k_core_probe_fw(struct a
device_get_mac_address(ar->dev, ar->mac_addr);
More information about the lede-commits
mailing list