[openwrt/openwrt] treewide: gpio to gpios
LEDE Commits
lede-commits at lists.infradead.org
Mon Jun 17 04:03:45 PDT 2024
ansuel pushed a commit to openwrt/openwrt.git, branch main:
https://git.openwrt.org/6ff598306fa2964fab5def3ca2fc572a5d801c64
commit 6ff598306fa2964fab5def3ca2fc572a5d801c64
Author: Rosen Penev <rosenp at gmail.com>
AuthorDate: Mon Jun 10 16:49:29 2024 -0700
treewide: gpio to gpios
gpio is deprecated. Found with dtc's -Wdeprecated_gpio_property
Used git grep -E $'\tgpio = <' to make the changes.
Signed-off-by: Rosen Penev <rosenp at gmail.com>
Link: https://github.com/openwrt/openwrt/pull/15681
Signed-off-by: Christian Marangi <ansuelsmth at gmail.com>
---
target/linux/ath79/dts/qca955x_elecom_wab.dtsi | 2 +-
.../files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4018-mf287pro.dts | 2 +-
.../files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-xx8300.dtsi | 2 +-
.../kirkwood/files-6.1/arch/arm/boot/dts/kirkwood-dns320l.dts | 2 +-
.../kirkwood/files-6.1/arch/arm/boot/dts/kirkwood-goflexhome.dts | 2 +-
.../linux/kirkwood/files-6.1/arch/arm/boot/dts/kirkwood-nas1.dts | 2 +-
.../files-6.6/arch/arm/boot/dts/marvell/kirkwood-dns320l.dts | 2 +-
.../files-6.6/arch/arm/boot/dts/marvell/kirkwood-goflexhome.dts | 2 +-
.../files-6.6/arch/arm/boot/dts/marvell/kirkwood-nas1.dts | 2 +-
.../002-6.2-ARM-dts-kirkwood-Add-Zyxel-NSA310S-board.patch | 4 ++--
.../lantiq/files/arch/mips/boot/dts/lantiq/ar9_avm_fritz7320.dts | 4 ++--
.../lantiq/files/arch/mips/boot/dts/lantiq/ar9_bt_homehub-v3a.dts | 2 +-
.../files/arch/mips/boot/dts/lantiq/ar9_buffalo_wbmr-hp-g300h.dts | 2 +-
.../lantiq/files/arch/mips/boot/dts/lantiq/ar9_zte_h201l.dts | 2 +-
.../lantiq/files/arch/mips/boot/dts/lantiq/ar9_zyxel_p-2601hn.dts | 2 +-
.../arch/mips/boot/dts/lantiq/danube_arcadyan_arv4518pwr01.dtsi | 2 +-
.../files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv4519pw.dts | 2 +-
.../files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv4520pw.dts | 2 +-
.../files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv452cqw.dts | 2 +-
.../arch/mips/boot/dts/lantiq/danube_arcadyan_arv7510pw22.dts | 2 +-
.../files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv7518pw.dts | 2 +-
.../files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv752dpw.dts | 2 +-
.../arch/mips/boot/dts/lantiq/danube_arcadyan_arv752dpw22.dts | 2 +-
.../arch/mips/boot/dts/lantiq/danube_arcadyan_arv8539pw22.dts | 2 +-
.../files/arch/mips/boot/dts/lantiq/danube_audiocodes_mp-252.dts | 2 +-
.../arch/mips/boot/dts/lantiq/danube_siemens_gigaset-sx76x.dts | 2 +-
.../files/arch/mips/boot/dts/lantiq/vr9_arcadyan_arv7519rw22.dts | 2 +-
.../files/arch/mips/boot/dts/lantiq/vr9_arcadyan_vgv7510kw22.dtsi | 2 +-
.../files/arch/mips/boot/dts/lantiq/vr9_arcadyan_vgv7519.dtsi | 2 +-
.../arch/mips/boot/dts/lantiq/vr9_arcadyan_vrv9510kwac23.dts | 2 +-
.../files/arch/mips/boot/dts/lantiq/vr9_avm_fritz3370-rev2.dtsi | 4 ++--
.../lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz3390.dts | 4 ++--
.../lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz7430.dts | 2 +-
.../lantiq/files/arch/mips/boot/dts/lantiq/vr9_bt_homehub-v5a.dts | 2 +-
.../files/arch/mips/boot/dts/lantiq/vr9_buffalo_wbmr-300hpd.dts | 2 +-
.../files/arch/mips/boot/dts/lantiq/vr9_lantiq_easy80920.dtsi | 2 +-
.../files/arch/mips/boot/dts/lantiq/vr9_tplink_tdw89x0.dtsi | 2 +-
.../lantiq/files/arch/mips/boot/dts/lantiq/vr9_tplink_vr200.dtsi | 2 +-
.../files/arch/mips/boot/dts/lantiq/vr9_zyxel_p-2812hnu-fx.dtsi | 2 +-
target/linux/mediatek/dts/mt7622-elecom-wrc-2533gent.dts | 2 +-
.../linux/mediatek/dts/mt7981a-glinet-gl-x3000-xe3000-common.dtsi | 2 +-
target/linux/mediatek/dts/mt7981b-cudy-tr3000-v1.dts | 2 +-
target/linux/mediatek/dts/mt7981b-glinet-gl-mt2500.dts | 2 +-
target/linux/mediatek/dts/mt7981b-glinet-gl-mt3000.dts | 4 ++--
target/linux/mediatek/dts/mt7981b-yuncore-ax835.dts | 2 +-
.../boot/dts/mediatek/mt7988a-bananapi-bpi-r4-wifi-mt7996a.dtso | 2 +-
.../arch/arm/boot/dts/marvell/armada-370-buffalo-ls220de.dts | 4 ++--
.../arch/arm/boot/dts/marvell/armada-370-buffalo-ls421de.dts | 6 +++---
.../files-6.6/arch/arm/boot/dts/marvell/armada-380-iij-sa-w2.dts | 4 ++--
.../arch/arm/boot/dts/marvell/armada-385-fortinet-fg-xxe.dtsi | 2 +-
.../arch/arm/boot/dts/marvell/armada-385-linksys-venom.dts | 2 +-
.../files-6.6/arch/arm/boot/dts/marvell/armada-385-nas1dual.dts | 2 +-
.../arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts | 2 +-
.../files-6.6/arch/arm64/boot/dts/marvell/cn9130-clearfog-pro.dts | 2 +-
.../files-6.6/arch/arm64/boot/dts/marvell/cn9132-puzzle-m902.dts | 4 ++--
.../qualcommax/files/arch/arm64/boot/dts/qcom/ipq8070-rm2-6.dts | 8 ++++----
.../qualcommax/files/arch/arm64/boot/dts/qcom/ipq8071-eap102.dts | 4 ++--
.../qualcommax/files/arch/arm64/boot/dts/qcom/ipq8071-mf269.dts | 2 +-
.../files/arch/arm64/boot/dts/qcom/ipq8074-wxr-5950ax12.dts | 2 +-
target/linux/ramips/dts/mt7621_asus_rt-ac57u-v1.dts | 2 +-
target/linux/ramips/dts/mt7621_meig_slt866.dts | 2 +-
target/linux/ramips/dts/mt7621_mikrotik_ltap-2hnd.dts | 4 ++--
target/linux/ramips/dts/mt7621_mikrotik_routerboard-m11g.dts | 2 +-
target/linux/ramips/dts/mt7621_mikrotik_routerboard-m33g.dts | 8 ++++----
target/linux/ramips/dts/mt7621_netgear_sercomm_ayx.dtsi | 2 +-
target/linux/ramips/dts/mt7621_netgear_sercomm_chj.dtsi | 2 +-
target/linux/ramips/dts/mt7621_snr_snr-cpe-me1.dts | 2 +-
target/linux/ramips/dts/mt7621_snr_snr-cpe-me2-sfp.dts | 2 +-
target/linux/ramips/dts/mt7621_tplink_archer-c6u-v1.dts | 2 +-
target/linux/ramips/dts/mt7621_tplink_er605-v2.dts | 2 +-
target/linux/ramips/dts/mt7621_xiaomi_mi-router-3-pro.dts | 2 +-
target/linux/ramips/dts/mt7621_xiaomi_mi-router-3g.dts | 2 +-
target/linux/ramips/dts/mt7628an_netgear_r6120.dts | 2 +-
.../linux/sunxi/patches-6.6/410-sunxi-add-bananapi-p2-zero.patch | 4 ++--
74 files changed, 93 insertions(+), 93 deletions(-)
diff --git a/target/linux/ath79/dts/qca955x_elecom_wab.dtsi b/target/linux/ath79/dts/qca955x_elecom_wab.dtsi
index 3e24c514a9..43e34c6029 100644
--- a/target/linux/ath79/dts/qca955x_elecom_wab.dtsi
+++ b/target/linux/ath79/dts/qca955x_elecom_wab.dtsi
@@ -74,7 +74,7 @@
regulator-name = "usb-vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio 11 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-always-on;
};
diff --git a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4018-mf287pro.dts b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4018-mf287pro.dts
index b4b9451cb2..29220624de 100644
--- a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4018-mf287pro.dts
+++ b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4018-mf287pro.dts
@@ -16,7 +16,7 @@
regulator-max-microvolt = <5000000>;
regulator-always-on;
regulator-boot-on;
- gpio = <&tlmm 25 GPIO_ACTIVE_LOW>;
+ gpios = <&tlmm 25 GPIO_ACTIVE_LOW>;
};
};
diff --git a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-xx8300.dtsi b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-xx8300.dtsi
index ae2d88da93..0673dc0241 100644
--- a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-xx8300.dtsi
+++ b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-xx8300.dtsi
@@ -59,7 +59,7 @@
regulator-max-microvolt = <5000000>;
regulator-always-on;
regulator-boot-on;
- gpio = <&tlmm 68 GPIO_ACTIVE_LOW>;
+ gpios = <&tlmm 68 GPIO_ACTIVE_LOW>;
};
};
diff --git a/target/linux/kirkwood/files-6.1/arch/arm/boot/dts/kirkwood-dns320l.dts b/target/linux/kirkwood/files-6.1/arch/arm/boot/dts/kirkwood-dns320l.dts
index bd86c04ea7..afeb76d5ff 100644
--- a/target/linux/kirkwood/files-6.1/arch/arm/boot/dts/kirkwood-dns320l.dts
+++ b/target/linux/kirkwood/files-6.1/arch/arm/boot/dts/kirkwood-dns320l.dts
@@ -117,7 +117,7 @@
enable-active-high;
regulator-always-on;
regulator-boot-on;
- gpio = <&gpio0 24 0>;
+ gpios = <&gpio0 24 0>;
};
};
};
diff --git a/target/linux/kirkwood/files-6.1/arch/arm/boot/dts/kirkwood-goflexhome.dts b/target/linux/kirkwood/files-6.1/arch/arm/boot/dts/kirkwood-goflexhome.dts
index b0b69b46cd..2f4109fe63 100644
--- a/target/linux/kirkwood/files-6.1/arch/arm/boot/dts/kirkwood-goflexhome.dts
+++ b/target/linux/kirkwood/files-6.1/arch/arm/boot/dts/kirkwood-goflexhome.dts
@@ -96,7 +96,7 @@
enable-active-high;
regulator-always-on;
regulator-boot-on;
- gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
};
};
};
diff --git a/target/linux/kirkwood/files-6.1/arch/arm/boot/dts/kirkwood-nas1.dts b/target/linux/kirkwood/files-6.1/arch/arm/boot/dts/kirkwood-nas1.dts
index 379db8acd8..0ceddb0d64 100644
--- a/target/linux/kirkwood/files-6.1/arch/arm/boot/dts/kirkwood-nas1.dts
+++ b/target/linux/kirkwood/files-6.1/arch/arm/boot/dts/kirkwood-nas1.dts
@@ -110,7 +110,7 @@
regulator-max-microvolt = <5000000>;
enable-active-high;
regulator-always-on;
- gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
};
};
};
diff --git a/target/linux/kirkwood/files-6.6/arch/arm/boot/dts/marvell/kirkwood-dns320l.dts b/target/linux/kirkwood/files-6.6/arch/arm/boot/dts/marvell/kirkwood-dns320l.dts
index bd86c04ea7..afeb76d5ff 100644
--- a/target/linux/kirkwood/files-6.6/arch/arm/boot/dts/marvell/kirkwood-dns320l.dts
+++ b/target/linux/kirkwood/files-6.6/arch/arm/boot/dts/marvell/kirkwood-dns320l.dts
@@ -117,7 +117,7 @@
enable-active-high;
regulator-always-on;
regulator-boot-on;
- gpio = <&gpio0 24 0>;
+ gpios = <&gpio0 24 0>;
};
};
};
diff --git a/target/linux/kirkwood/files-6.6/arch/arm/boot/dts/marvell/kirkwood-goflexhome.dts b/target/linux/kirkwood/files-6.6/arch/arm/boot/dts/marvell/kirkwood-goflexhome.dts
index b0b69b46cd..2f4109fe63 100644
--- a/target/linux/kirkwood/files-6.6/arch/arm/boot/dts/marvell/kirkwood-goflexhome.dts
+++ b/target/linux/kirkwood/files-6.6/arch/arm/boot/dts/marvell/kirkwood-goflexhome.dts
@@ -96,7 +96,7 @@
enable-active-high;
regulator-always-on;
regulator-boot-on;
- gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
};
};
};
diff --git a/target/linux/kirkwood/files-6.6/arch/arm/boot/dts/marvell/kirkwood-nas1.dts b/target/linux/kirkwood/files-6.6/arch/arm/boot/dts/marvell/kirkwood-nas1.dts
index 379db8acd8..0ceddb0d64 100644
--- a/target/linux/kirkwood/files-6.6/arch/arm/boot/dts/marvell/kirkwood-nas1.dts
+++ b/target/linux/kirkwood/files-6.6/arch/arm/boot/dts/marvell/kirkwood-nas1.dts
@@ -110,7 +110,7 @@
regulator-max-microvolt = <5000000>;
enable-active-high;
regulator-always-on;
- gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
};
};
};
diff --git a/target/linux/kirkwood/patches-6.1/002-6.2-ARM-dts-kirkwood-Add-Zyxel-NSA310S-board.patch b/target/linux/kirkwood/patches-6.1/002-6.2-ARM-dts-kirkwood-Add-Zyxel-NSA310S-board.patch
index 09e71813cd..6a8e8e8c9b 100644
--- a/target/linux/kirkwood/patches-6.1/002-6.2-ARM-dts-kirkwood-Add-Zyxel-NSA310S-board.patch
+++ b/target/linux/kirkwood/patches-6.1/002-6.2-ARM-dts-kirkwood-Add-Zyxel-NSA310S-board.patch
@@ -160,7 +160,7 @@ Signed-off-by: Gregory CLEMENT <gregory.clement at bootlin.com>
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
-+ gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>;
++ gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>;
+ };
+
+ sata1_power: regulator at 2 {
@@ -171,7 +171,7 @@ Signed-off-by: Gregory CLEMENT <gregory.clement at bootlin.com>
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
-+ gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>;
++ gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ thermal-zones {
diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/ar9_avm_fritz7320.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/ar9_avm_fritz7320.dts
index 3023d4925d..96adb0ddad 100644
--- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/ar9_avm_fritz7320.dts
+++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/ar9_avm_fritz7320.dts
@@ -82,7 +82,7 @@
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio 50 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio 50 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -94,7 +94,7 @@
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio 51 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio 51 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/ar9_bt_homehub-v3a.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/ar9_bt_homehub-v3a.dts
index e8024d6463..fdc3c3037b 100644
--- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/ar9_bt_homehub-v3a.dts
+++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/ar9_bt_homehub-v3a.dts
@@ -101,7 +101,7 @@
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio 33 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/ar9_buffalo_wbmr-hp-g300h.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/ar9_buffalo_wbmr-hp-g300h.dts
index 5a50f27c08..afb858b9e6 100644
--- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/ar9_buffalo_wbmr-hp-g300h.dts
+++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/ar9_buffalo_wbmr-hp-g300h.dts
@@ -108,7 +108,7 @@
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio 36 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio 36 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/ar9_zte_h201l.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/ar9_zte_h201l.dts
index b17efe740a..a0e3664b6d 100644
--- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/ar9_zte_h201l.dts
+++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/ar9_zte_h201l.dts
@@ -116,7 +116,7 @@
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio 36 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio 36 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/ar9_zyxel_p-2601hn.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/ar9_zyxel_p-2601hn.dts
index 8baf91861c..760bced2d2 100644
--- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/ar9_zyxel_p-2601hn.dts
+++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/ar9_zyxel_p-2601hn.dts
@@ -106,7 +106,7 @@
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio 9 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv4518pwr01.dtsi b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv4518pwr01.dtsi
index 3d56e76c46..45ae578567 100644
--- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv4518pwr01.dtsi
+++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv4518pwr01.dtsi
@@ -105,7 +105,7 @@
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio 14 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv4519pw.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv4519pw.dts
index 3eff5cd6da..55ac2038c8 100644
--- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv4519pw.dts
+++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv4519pw.dts
@@ -121,7 +121,7 @@
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio 14 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv4520pw.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv4520pw.dts
index c2b44ebb66..487a107ff2 100644
--- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv4520pw.dts
+++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv4520pw.dts
@@ -125,7 +125,7 @@
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio 28 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio 28 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv452cqw.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv452cqw.dts
index 34bb167b6a..1fd192d221 100644
--- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv452cqw.dts
+++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv452cqw.dts
@@ -139,7 +139,7 @@
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio 28 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio 28 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv7510pw22.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv7510pw22.dts
index 52ba5e1a3b..237188137b 100644
--- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv7510pw22.dts
+++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv7510pw22.dts
@@ -80,7 +80,7 @@
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio 8 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv7518pw.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv7518pw.dts
index 34b8808442..fe642b643f 100644
--- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv7518pw.dts
+++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv7518pw.dts
@@ -120,7 +120,7 @@
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio 14 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv752dpw.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv752dpw.dts
index f56ee53e39..c5362a4d48 100644
--- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv752dpw.dts
+++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv752dpw.dts
@@ -118,7 +118,7 @@
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpiomm 0 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpiomm 0 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv752dpw22.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv752dpw22.dts
index 910cf65b76..9522e57f5e 100644
--- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv752dpw22.dts
+++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv752dpw22.dts
@@ -134,7 +134,7 @@
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpiomm 0 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpiomm 0 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv8539pw22.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv8539pw22.dts
index 1a8b29a477..46b98c8c20 100644
--- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv8539pw22.dts
+++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv8539pw22.dts
@@ -87,7 +87,7 @@
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio 14 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_audiocodes_mp-252.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_audiocodes_mp-252.dts
index 624f815148..601498beba 100644
--- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_audiocodes_mp-252.dts
+++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_audiocodes_mp-252.dts
@@ -21,7 +21,7 @@
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio 3 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio 3 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_siemens_gigaset-sx76x.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_siemens_gigaset-sx76x.dts
index b2585cf5a7..5b57f70c9d 100644
--- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_siemens_gigaset-sx76x.dts
+++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_siemens_gigaset-sx76x.dts
@@ -45,7 +45,7 @@
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio 29 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_arcadyan_arv7519rw22.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_arcadyan_arv7519rw22.dts
index 9107624eb1..000add09d8 100644
--- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_arcadyan_arv7519rw22.dts
+++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_arcadyan_arv7519rw22.dts
@@ -92,7 +92,7 @@
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio 32 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio 32 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_arcadyan_vgv7510kw22.dtsi b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_arcadyan_vgv7510kw22.dtsi
index 90d11c991d..6b2aa2b974 100644
--- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_arcadyan_vgv7510kw22.dtsi
+++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_arcadyan_vgv7510kw22.dtsi
@@ -106,7 +106,7 @@
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio 47 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_arcadyan_vgv7519.dtsi b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_arcadyan_vgv7519.dtsi
index e0bcaa951b..5056f3c709 100644
--- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_arcadyan_vgv7519.dtsi
+++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_arcadyan_vgv7519.dtsi
@@ -126,7 +126,7 @@
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio 32 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio 32 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_arcadyan_vrv9510kwac23.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_arcadyan_vrv9510kwac23.dts
index 4837223813..9d9f981e95 100644
--- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_arcadyan_vrv9510kwac23.dts
+++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_arcadyan_vrv9510kwac23.dts
@@ -159,7 +159,7 @@
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio 32 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio 32 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz3370-rev2.dtsi b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz3370-rev2.dtsi
index 4c9b073b70..fbf86f9aef 100644
--- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz3370-rev2.dtsi
+++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz3370-rev2.dtsi
@@ -102,7 +102,7 @@
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio 14 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -114,7 +114,7 @@
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio 5 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz3390.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz3390.dts
index aef33f2f09..dc81f81ca4 100644
--- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz3390.dts
+++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz3390.dts
@@ -93,7 +93,7 @@
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio 14 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -105,7 +105,7 @@
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio 5 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz7430.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz7430.dts
index cbfa7ebe48..a0af4dff32 100644
--- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz7430.dts
+++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz7430.dts
@@ -90,7 +90,7 @@
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio 5 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_bt_homehub-v5a.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_bt_homehub-v5a.dts
index dc43b3a994..0ee2cf74d1 100644
--- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_bt_homehub-v5a.dts
+++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_bt_homehub-v5a.dts
@@ -113,7 +113,7 @@
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio 33 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_buffalo_wbmr-300hpd.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_buffalo_wbmr-300hpd.dts
index 31bbfc67cc..6a23794c7b 100644
--- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_buffalo_wbmr-300hpd.dts
+++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_buffalo_wbmr-300hpd.dts
@@ -150,7 +150,7 @@
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio 33 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_lantiq_easy80920.dtsi b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_lantiq_easy80920.dtsi
index a8b5f25810..f477ad8db2 100644
--- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_lantiq_easy80920.dtsi
+++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_lantiq_easy80920.dtsi
@@ -96,7 +96,7 @@
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio 33 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_tplink_tdw89x0.dtsi b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_tplink_tdw89x0.dtsi
index d133b5b6d3..c3e69f18fa 100644
--- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_tplink_tdw89x0.dtsi
+++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_tplink_tdw89x0.dtsi
@@ -107,7 +107,7 @@
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio 33 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_tplink_vr200.dtsi b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_tplink_vr200.dtsi
index 2160adf793..0fc54677db 100644
--- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_tplink_vr200.dtsi
+++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_tplink_vr200.dtsi
@@ -99,7 +99,7 @@
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio 33 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_zyxel_p-2812hnu-fx.dtsi b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_zyxel_p-2812hnu-fx.dtsi
index 89b7e3e98f..ac536e7a7a 100644
--- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_zyxel_p-2812hnu-fx.dtsi
+++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_zyxel_p-2812hnu-fx.dtsi
@@ -110,7 +110,7 @@
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio 33 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
diff --git a/target/linux/mediatek/dts/mt7622-elecom-wrc-2533gent.dts b/target/linux/mediatek/dts/mt7622-elecom-wrc-2533gent.dts
index 3e061ef945..7fe5d02e1a 100644
--- a/target/linux/mediatek/dts/mt7622-elecom-wrc-2533gent.dts
+++ b/target/linux/mediatek/dts/mt7622-elecom-wrc-2533gent.dts
@@ -130,7 +130,7 @@
regulator-name = "usb_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&pio 22 GPIO_ACTIVE_LOW>;
+ gpios = <&pio 22 GPIO_ACTIVE_LOW>;
enable-active-high;
};
diff --git a/target/linux/mediatek/dts/mt7981a-glinet-gl-x3000-xe3000-common.dtsi b/target/linux/mediatek/dts/mt7981a-glinet-gl-x3000-xe3000-common.dtsi
index 4b311dbe21..e9050e02e5 100644
--- a/target/linux/mediatek/dts/mt7981a-glinet-gl-x3000-xe3000-common.dtsi
+++ b/target/linux/mediatek/dts/mt7981a-glinet-gl-x3000-xe3000-common.dtsi
@@ -31,7 +31,7 @@
regulator-name = "fan";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&pio 28 GPIO_ACTIVE_HIGH>;
+ gpios = <&pio 28 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
diff --git a/target/linux/mediatek/dts/mt7981b-cudy-tr3000-v1.dts b/target/linux/mediatek/dts/mt7981b-cudy-tr3000-v1.dts
index 2d18af860e..1f03b42b1b 100644
--- a/target/linux/mediatek/dts/mt7981b-cudy-tr3000-v1.dts
+++ b/target/linux/mediatek/dts/mt7981b-cudy-tr3000-v1.dts
@@ -65,7 +65,7 @@
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&pio 9 GPIO_ACTIVE_LOW>;
+ gpios = <&pio 9 GPIO_ACTIVE_LOW>;
regulator-boot-on;
};
};
diff --git a/target/linux/mediatek/dts/mt7981b-glinet-gl-mt2500.dts b/target/linux/mediatek/dts/mt7981b-glinet-gl-mt2500.dts
index 9b7c85e519..15818a90fc 100644
--- a/target/linux/mediatek/dts/mt7981b-glinet-gl-mt2500.dts
+++ b/target/linux/mediatek/dts/mt7981b-glinet-gl-mt2500.dts
@@ -57,7 +57,7 @@
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&pio 12 GPIO_ACTIVE_HIGH>;
+ gpios = <&pio 12 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-boot-on;
};
diff --git a/target/linux/mediatek/dts/mt7981b-glinet-gl-mt3000.dts b/target/linux/mediatek/dts/mt7981b-glinet-gl-mt3000.dts
index b1ebaf4312..7271798921 100644
--- a/target/linux/mediatek/dts/mt7981b-glinet-gl-mt3000.dts
+++ b/target/linux/mediatek/dts/mt7981b-glinet-gl-mt3000.dts
@@ -56,7 +56,7 @@
regulator-name = "fan";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&pio 28 GPIO_ACTIVE_HIGH>;
+ gpios = <&pio 28 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-boot-on;
};
@@ -66,7 +66,7 @@
regulator-name = "usb_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&pio 12 GPIO_ACTIVE_HIGH>;
+ gpios = <&pio 12 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-boot-on;
};
diff --git a/target/linux/mediatek/dts/mt7981b-yuncore-ax835.dts b/target/linux/mediatek/dts/mt7981b-yuncore-ax835.dts
index 8b716e8742..5f98e6178a 100644
--- a/target/linux/mediatek/dts/mt7981b-yuncore-ax835.dts
+++ b/target/linux/mediatek/dts/mt7981b-yuncore-ax835.dts
@@ -36,7 +36,7 @@
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
- gpio = <&pio 5 GPIO_ACTIVE_HIGH>;
+ gpios = <&pio 5 GPIO_ACTIVE_HIGH>;
};
leds {
diff --git a/target/linux/mediatek/files-6.6/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-wifi-mt7996a.dtso b/target/linux/mediatek/files-6.6/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-wifi-mt7996a.dtso
index 8a029b149f..baba44e595 100644
--- a/target/linux/mediatek/files-6.6/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-wifi-mt7996a.dtso
+++ b/target/linux/mediatek/files-6.6/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-wifi-mt7996a.dtso
@@ -15,7 +15,7 @@
regulator-name = "wifi";
regulator-min-microvolt = <12000000>;
regulator-max-microvolt = <12000000>;
- gpio = <&pio 4 GPIO_ACTIVE_HIGH>;
+ gpios = <&pio 4 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-always-on;
};
diff --git a/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-370-buffalo-ls220de.dts b/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-370-buffalo-ls220de.dts
index 11be6a4028..8740cb32d9 100644
--- a/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-370-buffalo-ls220de.dts
+++ b/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-370-buffalo-ls220de.dts
@@ -192,7 +192,7 @@
enable-active-high;
regulator-always-on;
regulator-boot-on;
- gpio = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
};
sata2_power: regulator at 2 {
@@ -205,7 +205,7 @@
enable-active-high;
regulator-always-on;
regulator-boot-on;
- gpio = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
};
};
};
diff --git a/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-370-buffalo-ls421de.dts b/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-370-buffalo-ls421de.dts
index 59400839a7..13cc8efa2d 100644
--- a/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-370-buffalo-ls421de.dts
+++ b/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-370-buffalo-ls421de.dts
@@ -204,7 +204,7 @@
enable-active-high;
regulator-always-on;
regulator-boot-on;
- gpio = <&gpio0 5 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
};
sata1_power: regulator at 1 {
@@ -217,7 +217,7 @@
enable-active-high;
regulator-always-on;
regulator-boot-on;
- gpio = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
};
sata2_power: regulator at 2 {
@@ -230,7 +230,7 @@
enable-active-high;
regulator-always-on;
regulator-boot-on;
- gpio = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
};
};
};
diff --git a/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-380-iij-sa-w2.dts b/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-380-iij-sa-w2.dts
index 01c1ef675b..86029d3629 100644
--- a/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-380-iij-sa-w2.dts
+++ b/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-380-iij-sa-w2.dts
@@ -151,7 +151,7 @@
regulator-name = "vbus-usb0";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio1 20 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-always-on;
};
@@ -161,7 +161,7 @@
regulator-name = "vbus-usb1";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio1 21 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-always-on;
};
diff --git a/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-385-fortinet-fg-xxe.dtsi b/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-385-fortinet-fg-xxe.dtsi
index 6a5e016d30..ba4460fddd 100644
--- a/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-385-fortinet-fg-xxe.dtsi
+++ b/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-385-fortinet-fg-xxe.dtsi
@@ -151,7 +151,7 @@
regulator-name = "usb-vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio1 21 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
regulator-always-on;
};
};
diff --git a/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-385-linksys-venom.dts b/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-385-linksys-venom.dts
index a2ca3158cf..63d25701c9 100644
--- a/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-385-linksys-venom.dts
+++ b/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-385-linksys-venom.dts
@@ -205,7 +205,7 @@
};
&usb3_1_vbus {
- gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
};
&usb3_1_vbus_pins {
diff --git a/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-385-nas1dual.dts b/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-385-nas1dual.dts
index f1fd72a93c..b3dca335c9 100644
--- a/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-385-nas1dual.dts
+++ b/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-385-nas1dual.dts
@@ -124,7 +124,7 @@
regulator-name = "sata-power";
regulator-min-microvolt = <12000000>;
regulator-max-microvolt = <12000000>;
- gpio = <&gpio1 20 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
regulator-always-on;
};
};
diff --git a/target/linux/mvebu/files-6.6/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts b/target/linux/mvebu/files-6.6/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts
index 1a6594e3cd..063eb86992 100644
--- a/target/linux/mvebu/files-6.6/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts
+++ b/target/linux/mvebu/files-6.6/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts
@@ -40,7 +40,7 @@
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
- gpio = <&gpionb 19 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpionb 19 GPIO_ACTIVE_HIGH>;
};
usb3_phy: usb3-phy {
diff --git a/target/linux/mvebu/files-6.6/arch/arm64/boot/dts/marvell/cn9130-clearfog-pro.dts b/target/linux/mvebu/files-6.6/arch/arm64/boot/dts/marvell/cn9130-clearfog-pro.dts
index b5cc630781..15e19fb932 100644
--- a/target/linux/mvebu/files-6.6/arch/arm64/boot/dts/marvell/cn9130-clearfog-pro.dts
+++ b/target/linux/mvebu/files-6.6/arch/arm64/boot/dts/marvell/cn9130-clearfog-pro.dts
@@ -78,7 +78,7 @@
regulator-name = "v_5v0_usb3_hst_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&expander0 6 GPIO_ACTIVE_LOW>;
+ gpios = <&expander0 6 GPIO_ACTIVE_LOW>;
vin-supply = <&v_5v0>;
};
diff --git a/target/linux/mvebu/files-6.6/arch/arm64/boot/dts/marvell/cn9132-puzzle-m902.dts b/target/linux/mvebu/files-6.6/arch/arm64/boot/dts/marvell/cn9132-puzzle-m902.dts
index 67dace4888..0c042f12de 100644
--- a/target/linux/mvebu/files-6.6/arch/arm64/boot/dts/marvell/cn9132-puzzle-m902.dts
+++ b/target/linux/mvebu/files-6.6/arch/arm64/boot/dts/marvell/cn9132-puzzle-m902.dts
@@ -68,7 +68,7 @@
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
- gpio = <&cp2_gpio1 2 GPIO_ACTIVE_HIGH>;
+ gpios = <&cp2_gpio1 2 GPIO_ACTIVE_HIGH>;
};
cp2_usb3_0_phy0: cp2_usb3_phy0 {
@@ -82,7 +82,7 @@
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
- gpio = <&cp2_gpio1 3 GPIO_ACTIVE_HIGH>;
+ gpios = <&cp2_gpio1 3 GPIO_ACTIVE_HIGH>;
};
cp2_usb3_0_phy1: cp2_usb3_phy1 {
diff --git a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8070-rm2-6.dts b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8070-rm2-6.dts
index d935e19ad2..5d3123f75e 100644
--- a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8070-rm2-6.dts
+++ b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8070-rm2-6.dts
@@ -57,26 +57,26 @@
led_status_amber: status-amber {
color = <LED_COLOR_ID_AMBER>;
function = LED_FUNCTION_STATUS;
- gpio = <&tlmm 25 GPIO_ACTIVE_HIGH>;
+ gpios = <&tlmm 25 GPIO_ACTIVE_HIGH>;
};
led_status_blue: status-blue {
color = <LED_COLOR_ID_BLUE>;
function = LED_FUNCTION_STATUS;
- gpio = <&tlmm 26 GPIO_ACTIVE_HIGH>;
+ gpios = <&tlmm 26 GPIO_ACTIVE_HIGH>;
};
led_status_red: status-red {
color = <LED_COLOR_ID_RED>;
function = LED_FUNCTION_STATUS;
- gpio = <&tlmm 31 GPIO_ACTIVE_HIGH>;
+ gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>;
};
};
fan: gpio-fan {
#cooling-cells = <2>;
compatible = "gpio-fan";
- gpio = <&tlmm 29 GPIO_ACTIVE_HIGH>;
+ gpios = <&tlmm 29 GPIO_ACTIVE_HIGH>;
gpio-fan,speed-map = <0 0>, <1 1>;
};
};
diff --git a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8071-eap102.dts b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8071-eap102.dts
index d55904a24a..f8fe6b42f8 100644
--- a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8071-eap102.dts
+++ b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8071-eap102.dts
@@ -54,13 +54,13 @@
led_wlan2g {
label = "green:wlan2g";
- gpio = <&tlmm 47 GPIO_ACTIVE_HIGH>;
+ gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy1radio";
};
led_wlan5g {
label = "green:wlan5g";
- gpio = <&tlmm 48 GPIO_ACTIVE_HIGH>;
+ gpios = <&tlmm 48 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy0radio";
};
diff --git a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8071-mf269.dts b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8071-mf269.dts
index 3ca92a7a8f..866ed5e9c3 100644
--- a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8071-mf269.dts
+++ b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8071-mf269.dts
@@ -51,7 +51,7 @@
led_power: power {
function = LED_FUNCTION_POWER;
color = <LED_COLOR_ID_WHITE>;
- gpio = <&tlmm 56 GPIO_ACTIVE_HIGH>;
+ gpios = <&tlmm 56 GPIO_ACTIVE_HIGH>;
};
};
};
diff --git a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8074-wxr-5950ax12.dts b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8074-wxr-5950ax12.dts
index d8237e81dd..347bb6e8ab 100644
--- a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8074-wxr-5950ax12.dts
+++ b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8074-wxr-5950ax12.dts
@@ -131,7 +131,7 @@
regulator-name = "vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&tlmm 64 GPIO_ACTIVE_HIGH>;
+ gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-always-on;
};
diff --git a/target/linux/ramips/dts/mt7621_asus_rt-ac57u-v1.dts b/target/linux/ramips/dts/mt7621_asus_rt-ac57u-v1.dts
index d5b46b14ee..f894cdf598 100644
--- a/target/linux/ramips/dts/mt7621_asus_rt-ac57u-v1.dts
+++ b/target/linux/ramips/dts/mt7621_asus_rt-ac57u-v1.dts
@@ -56,7 +56,7 @@
led-regulator {
compatible = "regulator-fixed";
regulator-name = "LED-Power";
- gpio = <&gpio 46 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
diff --git a/target/linux/ramips/dts/mt7621_meig_slt866.dts b/target/linux/ramips/dts/mt7621_meig_slt866.dts
index d4e040649e..e49f7c1d4a 100644
--- a/target/linux/ramips/dts/mt7621_meig_slt866.dts
+++ b/target/linux/ramips/dts/mt7621_meig_slt866.dts
@@ -75,7 +75,7 @@
regulator-name = "pa-5g";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio 7 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-boot-on;
regulator-always-on;
diff --git a/target/linux/ramips/dts/mt7621_mikrotik_ltap-2hnd.dts b/target/linux/ramips/dts/mt7621_mikrotik_ltap-2hnd.dts
index feeda9685e..b5e38071f1 100644
--- a/target/linux/ramips/dts/mt7621_mikrotik_ltap-2hnd.dts
+++ b/target/linux/ramips/dts/mt7621_mikrotik_ltap-2hnd.dts
@@ -101,7 +101,7 @@
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio 10 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio 10 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-boot-on;
};
@@ -112,7 +112,7 @@
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio 11 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-boot-on;
};
diff --git a/target/linux/ramips/dts/mt7621_mikrotik_routerboard-m11g.dts b/target/linux/ramips/dts/mt7621_mikrotik_routerboard-m11g.dts
index eacbbda54d..5f9ee90e7c 100644
--- a/target/linux/ramips/dts/mt7621_mikrotik_routerboard-m11g.dts
+++ b/target/linux/ramips/dts/mt7621_mikrotik_routerboard-m11g.dts
@@ -51,7 +51,7 @@
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio 9 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-boot-on;
regulator-always-on;
diff --git a/target/linux/ramips/dts/mt7621_mikrotik_routerboard-m33g.dts b/target/linux/ramips/dts/mt7621_mikrotik_routerboard-m33g.dts
index 11171d9535..5e76261529 100644
--- a/target/linux/ramips/dts/mt7621_mikrotik_routerboard-m33g.dts
+++ b/target/linux/ramips/dts/mt7621_mikrotik_routerboard-m33g.dts
@@ -26,7 +26,7 @@
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio 9 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-boot-on;
regulator-always-on;
@@ -38,7 +38,7 @@
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio 10 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio 10 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-boot-on;
regulator-always-on;
@@ -50,7 +50,7 @@
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio 11 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-boot-on;
regulator-always-on;
@@ -62,7 +62,7 @@
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio 12 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-always-on;
};
diff --git a/target/linux/ramips/dts/mt7621_netgear_sercomm_ayx.dtsi b/target/linux/ramips/dts/mt7621_netgear_sercomm_ayx.dtsi
index f8dc6ebdbf..40d853d48e 100644
--- a/target/linux/ramips/dts/mt7621_netgear_sercomm_ayx.dtsi
+++ b/target/linux/ramips/dts/mt7621_netgear_sercomm_ayx.dtsi
@@ -79,7 +79,7 @@
regulator-name = "usb_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio 10 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio 10 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
diff --git a/target/linux/ramips/dts/mt7621_netgear_sercomm_chj.dtsi b/target/linux/ramips/dts/mt7621_netgear_sercomm_chj.dtsi
index 273bb9469c..16f20d9408 100644
--- a/target/linux/ramips/dts/mt7621_netgear_sercomm_chj.dtsi
+++ b/target/linux/ramips/dts/mt7621_netgear_sercomm_chj.dtsi
@@ -68,7 +68,7 @@
regulator-name = "usb_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio 10 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio 10 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
diff --git a/target/linux/ramips/dts/mt7621_snr_snr-cpe-me1.dts b/target/linux/ramips/dts/mt7621_snr_snr-cpe-me1.dts
index b287056bf1..4270226926 100644
--- a/target/linux/ramips/dts/mt7621_snr_snr-cpe-me1.dts
+++ b/target/linux/ramips/dts/mt7621_snr_snr-cpe-me1.dts
@@ -62,7 +62,7 @@
regulator-name = "usb_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio 17 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
diff --git a/target/linux/ramips/dts/mt7621_snr_snr-cpe-me2-sfp.dts b/target/linux/ramips/dts/mt7621_snr_snr-cpe-me2-sfp.dts
index 6249eb6520..b4324feccf 100644
--- a/target/linux/ramips/dts/mt7621_snr_snr-cpe-me2-sfp.dts
+++ b/target/linux/ramips/dts/mt7621_snr_snr-cpe-me2-sfp.dts
@@ -64,7 +64,7 @@
regulator-name = "usb_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio 17 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
diff --git a/target/linux/ramips/dts/mt7621_tplink_archer-c6u-v1.dts b/target/linux/ramips/dts/mt7621_tplink_archer-c6u-v1.dts
index b1a3e3e1bc..de352741f8 100644
--- a/target/linux/ramips/dts/mt7621_tplink_archer-c6u-v1.dts
+++ b/target/linux/ramips/dts/mt7621_tplink_archer-c6u-v1.dts
@@ -91,7 +91,7 @@
regulator-name = "usb_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio 3 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio 3 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
diff --git a/target/linux/ramips/dts/mt7621_tplink_er605-v2.dts b/target/linux/ramips/dts/mt7621_tplink_er605-v2.dts
index b71b7ad914..1299b02806 100644
--- a/target/linux/ramips/dts/mt7621_tplink_er605-v2.dts
+++ b/target/linux/ramips/dts/mt7621_tplink_er605-v2.dts
@@ -64,7 +64,7 @@
regulator-name = "usb_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio 10 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio 10 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
diff --git a/target/linux/ramips/dts/mt7621_xiaomi_mi-router-3-pro.dts b/target/linux/ramips/dts/mt7621_xiaomi_mi-router-3-pro.dts
index 96054135ae..2ed4b2c311 100644
--- a/target/linux/ramips/dts/mt7621_xiaomi_mi-router-3-pro.dts
+++ b/target/linux/ramips/dts/mt7621_xiaomi_mi-router-3-pro.dts
@@ -90,7 +90,7 @@
regulator-name = "usb_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio 12 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
diff --git a/target/linux/ramips/dts/mt7621_xiaomi_mi-router-3g.dts b/target/linux/ramips/dts/mt7621_xiaomi_mi-router-3g.dts
index ad9c18f8ff..7af316de6a 100644
--- a/target/linux/ramips/dts/mt7621_xiaomi_mi-router-3g.dts
+++ b/target/linux/ramips/dts/mt7621_xiaomi_mi-router-3g.dts
@@ -63,7 +63,7 @@
regulator-name = "usb_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio 12 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
diff --git a/target/linux/ramips/dts/mt7628an_netgear_r6120.dts b/target/linux/ramips/dts/mt7628an_netgear_r6120.dts
index 8a27f0d1ef..5e381f684a 100644
--- a/target/linux/ramips/dts/mt7628an_netgear_r6120.dts
+++ b/target/linux/ramips/dts/mt7628an_netgear_r6120.dts
@@ -12,7 +12,7 @@
compatible = "regulator-fixed";
regulator-name = "USB-power";
- gpio = <&gpio 45 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio 45 GPIO_ACTIVE_HIGH>;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
diff --git a/target/linux/sunxi/patches-6.6/410-sunxi-add-bananapi-p2-zero.patch b/target/linux/sunxi/patches-6.6/410-sunxi-add-bananapi-p2-zero.patch
index 01044fef49..350d7f0403 100644
--- a/target/linux/sunxi/patches-6.6/410-sunxi-add-bananapi-p2-zero.patch
+++ b/target/linux/sunxi/patches-6.6/410-sunxi-add-bananapi-p2-zero.patch
@@ -94,7 +94,7 @@
+ regulator-always-on;
+ regulator-boot-on;
+ enable-active-high;
-+ gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */
++ gpios = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */
+ vin-supply = <®_vcc5v0>;
+ };
+
@@ -106,7 +106,7 @@
+ regulator-always-on;
+ regulator-boot-on;
+ enable-active-high;
-+ gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
++ gpios = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+ vin-supply = <®_vcc5v0>;
+ };
+
More information about the lede-commits
mailing list