[openwrt/openwrt] ramips: add support for OpenFi 5Pro Travel Router
LEDE Commits
lede-commits at lists.infradead.org
Sun Jun 16 15:04:31 PDT 2024
hauke pushed a commit to openwrt/openwrt.git, branch main:
https://git.openwrt.org/5560791bbd6d6c90ba6c96558445e851e8581eba
commit 5560791bbd6d6c90ba6c96558445e851e8581eba
Author: Sven Huang <1036456939 at qq.com>
AuthorDate: Sat Jun 1 11:53:31 2024 +0800
ramips: add support for OpenFi 5Pro Travel Router
OpenFi 5Pro is a DualBand Travel Router, based on MT7621A.
Specification:
- Type : Travel Wi-Fi Router(built-in Type-C Power Cable)
- Size : 63 x 93 x 24mm
- Power : Internal Type-C Cable PD/DC 5V at 2A
- SoC : MediaTek MT7621A
- RAM : DDR3 512 MB
- Flash : SPI-NOR 64MB (W25Q512)
- WLAN : 2.4/5GHz 2T2R (MediaTek MT7603e/MT7613)
- Ethernet : 2x 10/100/1000Mbps
- USB : 1 x USB 2.0
- SDHCI : 1 x TF Slot (Max 512GB)
- LEDs : 3 x LEDs (GPIO#16 gpio#17 gpio#14)
- Button : 1 x Reset (GPIO#18), 1 x WPS (GPIO#13)
- UART : 1 x UART for Debug, 115200 8N1 (Pinout: GND TX RX 3.3V)
- UART 2 : 1xUART2 (Pinout: GND TX2 RX2 3.3V )
How to upgrade image in uboot
1. press reset button when boot for 5sec.
2. access 192.168.21.1 in web ui.
3. select image and upload
Signed-off-by: Sven Huang <1036456939 at qq.com>
---
target/linux/ramips/dts/mt7621_openfi_5pro.dts | 188 +++++++++++++++++++++
target/linux/ramips/image/mt7621.mk | 10 ++
.../mt7621/base-files/etc/board.d/02_network | 1 +
3 files changed, 199 insertions(+)
diff --git a/target/linux/ramips/dts/mt7621_openfi_5pro.dts b/target/linux/ramips/dts/mt7621_openfi_5pro.dts
new file mode 100755
index 0000000000..0ac503207c
--- /dev/null
+++ b/target/linux/ramips/dts/mt7621_openfi_5pro.dts
@@ -0,0 +1,188 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7621.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ compatible = "openfi,5pro", "mediatek,mt7621-soc";
+ model = "OpenFi 5Pro";
+
+ aliases {
+ led-boot = &led_system_blue;
+ led-failsafe = &led_system_blue;
+ led-running = &led_system_blue;
+ led-upgrade = &led_system_blue;
+ label-mac-device = &gmac0;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_system_blue: led-0 {
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_STATUS;
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+
+ led-1 {
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_WAN_ONLINE;
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ };
+
+ led-2 {
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_WLAN;
+ linux,default-trigger = "phy0tpt";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ flash at 0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <40000000>;
+ broken-flash-reset;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition at 0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition at 30000 {
+ label = "config";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ partition at 40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+
+ nvmem-layout {
+ compatible = "fixed-layout";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ eeprom_factory_0: eeprom at 0 {
+ reg = <0x0 0x400>;
+ };
+
+ eeprom_factory_8000: eeprom at 8000 {
+ reg = <0x8000 0x4da8>;
+ };
+
+ macaddr_factory_e000: macaddr at e000 {
+ reg = <0xe000 0x6>;
+ };
+
+ macaddr_factory_e006: macaddr at e006 {
+ reg = <0xe006 0x6>;
+ };
+ };
+ };
+
+ partition at 50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x3fb0000>;
+ };
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie0 {
+ wifi at 0,0 {
+ compatible = "mediatek,mt76";
+ reg = <0x0000 0 0 0 0>;
+ ieee80211-freq-limit = <2400000 2500000>;
+ nvmem-cells = <&eeprom_factory_0>;
+ nvmem-cell-names = "eeprom";
+ };
+};
+
+&pcie1 {
+ wifi at 0,0 {
+ compatible = "mediatek,mt76";
+ reg = <0x0000 0 0 0 0>;
+ ieee80211-freq-limit = <5000000 6000000>;
+ nvmem-cells = <&eeprom_factory_8000>;
+ nvmem-cell-names = "eeprom";
+ };
+};
+
+&gmac0 {
+ nvmem-cells = <&macaddr_factory_e000>;
+ nvmem-cell-names = "mac-address";
+};
+
+&gmac1 {
+ status = "okay";
+ label = "wan";
+ phy-handle = <ðphy0>;
+
+ nvmem-cells = <&macaddr_factory_e006>;
+ nvmem-cell-names = "mac-address";
+};
+
+ðphy0 {
+ /delete-property/ interrupts;
+};
+
+&switch0 {
+ ports {
+ port at 1 {
+ status = "okay";
+ label = "lan";
+ };
+ };
+};
+
+&sdhci {
+ status = "okay";
+};
+
+&state_default {
+ gpio {
+ groups = "jtag", "wdt";
+ function = "gpio";
+ };
+};
diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk
index ef374d6f4d..13b6a51966 100644
--- a/target/linux/ramips/image/mt7621.mk
+++ b/target/linux/ramips/image/mt7621.mk
@@ -2148,6 +2148,16 @@ define Device/netis_wf2881
endef
TARGET_DEVICES += netis_wf2881
+define Device/openfi_5pro
+ $(Device/dsa-migration)
+ IMAGE_SIZE := 65216k
+ DEVICE_VENDOR := OpenFi
+ DEVICE_MODEL := 5Pro
+ DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e kmod-mt7663-firmware-ap kmod-usb3 \
+ kmod-sdhci-mt7620
+endef
+TARGET_DEVICES += openfi_5pro
+
define Device/oraybox_x3a
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
index 247a27d145..386a3bb41d 100644
--- a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
@@ -66,6 +66,7 @@ ramips_setup_interfaces()
;;
asiarf,ap7621-001|\
humax,e10|\
+ openfi,5pro|\
wavlink,ws-wn572hp3-4g|\
winstars,ws-wn583a6)
ucidef_set_interfaces_lan_wan "lan" "wan"
More information about the lede-commits
mailing list