[openwrt/openwrt] ath79: switch default kernel to 6.6
LEDE Commits
lede-commits at lists.infradead.org
Fri Jun 14 08:39:06 PDT 2024
nick pushed a commit to openwrt/openwrt.git, branch main:
https://git.openwrt.org/4fdc7bb8f13fe7a3eff2e551f0fe621a6dee706e
commit 4fdc7bb8f13fe7a3eff2e551f0fe621a6dee706e
Author: Shiji Yang <yangshiji66 at qq.com>
AuthorDate: Tue Jun 11 08:28:39 2024 +0000
ath79: switch default kernel to 6.6
We haven't received any bug reports in the past few weeks. So it's
time to set kernel 6.6 as the default and remove kernel 6.1 support.
Signed-off-by: Shiji Yang <yangshiji66 at qq.com>
---
target/linux/ath79/Makefile | 3 +-
target/linux/ath79/config-6.1 | 215 -----
...-gpio-ath79-Convert-to-immutable-irq_chip.patch | 60 --
.../100-reset-ath79-read-back-reset-register.patch | 33 -
...-ath79-intc-add-irq-cascade-driver-for-QC.patch | 168 ----
...irqchip-irq-ath79-cpu-drop-OF-init-helper.patch | 23 -
...bindings-PCI-qcom-ar7100-adds-binding-doc.patch | 57 --
.../311-MIPS-pci-ar71xx-convert-to-OF.patch | 206 -----
...bindings-PCI-qcom-ar7240-adds-binding-doc.patch | 61 --
.../313-MIPS-pci-ar724x-convert-to-OF.patch | 213 -----
.../314-MIPS-ath79-remove-irq-code-from-pci.patch | 149 ----
...IPS-pci-ar724x-add-QCA9550-reset-sequence.patch | 130 ---
...MIPS-ath79-swizzle-pci-address-for-ar71xx.patch | 109 ---
.../ath79/patches-6.1/330-missing-registers.patch | 20 -
...-ath79-add-missing-QCA955x-GMAC-registers.patch | 90 --
.../ath79/patches-6.1/332-ath79-sgmii-config.patch | 30 -
.../340-register_gpio_driver_earlier.patch | 26 -
.../patches-6.1/350-MIPS-ath79-ath9k-exports.patch | 36 -
.../351-MIPS-ath79-common-exports.patch | 26 -
...0-MIPS-ath79-export-UART1-reference-clock.patch | 67 --
.../370-MIPS-ath79-sanitize-symbols.patch | 93 ---
...mtd-nor-support-mtd-name-from-device-tree.patch | 53 --
.../patches-6.1/410-mtd-cybertan-trx-parser.patch | 45 -
.../420-drivers-link-spi-before-mtd.patch | 20 -
.../patches-6.1/430-mtd-ar934x-nand-driver.patch | 34 -
.../patches-6.1/700-phy-add-ath79-usb-phys.patch | 333 --------
.../701-usb-add-more-OF-quirk-properties.patch | 24 -
.../710-net-use-downstream-ag71xx.patch | 42 -
.../720-mdio_bitbang_ignore_ta_value.patch | 44 -
...tbang-prevent-rescheduling-during-command.patch | 61 --
.../730-ar8216-make-reg-access-atomic.patch | 59 --
...00-leds-add-reset-controller-based-driver.patch | 186 -----
...ore-the-abused-interrupt-map-on-pcie-node.patch | 33 -
.../patches-6.1/900-unaligned_access_hacks.patch | 909 ---------------------
.../ath79/patches-6.1/910-mikrotik-rb4xx.patch | 121 ---
.../ath79/patches-6.1/911-mikrotik-rb91x.patch | 96 ---
36 files changed, 1 insertion(+), 3874 deletions(-)
diff --git a/target/linux/ath79/Makefile b/target/linux/ath79/Makefile
index 821b096772..b61d10cc6f 100644
--- a/target/linux/ath79/Makefile
+++ b/target/linux/ath79/Makefile
@@ -8,8 +8,7 @@ SUBTARGETS:=generic mikrotik nand tiny
FEATURES:=ramdisk squashfs usbgadget
-KERNEL_PATCHVER:=6.1
-KERNEL_TESTING_PATCHVER:=6.6
+KERNEL_PATCHVER:=6.6
include $(INCLUDE_DIR)/target.mk
diff --git a/target/linux/ath79/config-6.1 b/target/linux/ath79/config-6.1
deleted file mode 100644
index 87f520228f..0000000000
--- a/target/linux/ath79/config-6.1
+++ /dev/null
@@ -1,215 +0,0 @@
-CONFIG_AG71XX=y
-# CONFIG_AG71XX_DEBUG is not set
-CONFIG_AG71XX_DEBUG_FS=y
-CONFIG_AR8216_PHY=y
-CONFIG_AR8216_PHY_LEDS=y
-CONFIG_ARCH_32BIT_OFF_T=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_KEEP_MEMBLOCK=y
-CONFIG_ARCH_MMAP_RND_BITS_MAX=15
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=15
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_AT803X_PHY=y
-CONFIG_ATH79=y
-CONFIG_ATH79_WDT=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5"
-CONFIG_CC_NO_ARRAY_BOUNDS=y
-CONFIG_CEVT_R4K=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CMDLINE_OVERRIDE is not set
-CONFIG_COMMON_CLK=y
-CONFIG_COMPACT_UNEVICTABLE_DEFAULT=1
-CONFIG_COMPAT_32BIT_TIME=y
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_CPU_GENERIC_DUMP_TLB=y
-CONFIG_CPU_HAS_DIEI=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_RIXI=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPS32_R2=y
-CONFIG_CPU_MIPSR2=y
-CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y
-CONFIG_CPU_R4K_CACHE_TLB=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CPU_SUPPORTS_MSA=y
-CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
-CONFIG_CRYPTO_LIB_POLY1305_RSIZE=2
-CONFIG_CRYPTO_LIB_SHA1=y
-CONFIG_CRYPTO_LIB_UTILS=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CSRC_R4K=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DTC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_ETHERNET_PACKET_MANGLE=y
-CONFIG_EXCLUSIVE_SYSTEM_RAM=y
-CONFIG_FIXED_PHY=y
-CONFIG_FWNODE_MDIO=y
-CONFIG_FW_LOADER_PAGED_BUF=y
-CONFIG_FW_LOADER_SYSFS=y
-CONFIG_GCC11_NO_ARRAY_BOUNDS=y
-CONFIG_GCC_ASM_GOTO_OUTPUT_WORKAROUND=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_GETTIMEOFDAY=y
-CONFIG_GENERIC_IOMAP=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_LIB_ASHLDI3=y
-CONFIG_GENERIC_LIB_ASHRDI3=y
-CONFIG_GENERIC_LIB_CMPDI2=y
-CONFIG_GENERIC_LIB_LSHRDI3=y
-CONFIG_GENERIC_LIB_UCMPDI2=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PHY=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_PINCTRL_GROUPS=y
-CONFIG_GENERIC_PINMUX_FUNCTIONS=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GPIOLIB_IRQCHIP=y
-CONFIG_GPIO_74X164=y
-CONFIG_GPIO_ATH79=y
-CONFIG_GPIO_CDEV=y
-CONFIG_GPIO_GENERIC=y
-# CONFIG_GPIO_LATCH_MIKROTIK is not set
-# CONFIG_GPIO_RB91X_KEY is not set
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HZ_PERIODIC=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_MIPS_CPU=y
-CONFIG_IRQ_WORK=y
-CONFIG_LEDS_GPIO=y
-# CONFIG_LEDS_RESET is not set
-CONFIG_LIBFDT=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_MDIO_BITBANG=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MDIO_DEVRES=y
-CONFIG_MDIO_GPIO=y
-CONFIG_MEMFD_CREATE=y
-# CONFIG_MFD_RB4XX_CPLD is not set
-CONFIG_MFD_SYSCON=y
-CONFIG_MIGRATION=y
-CONFIG_MIPS=y
-CONFIG_MIPS_ASID_BITS=8
-CONFIG_MIPS_ASID_SHIFT=0
-CONFIG_MIPS_CLOCK_VSYSCALL=y
-# CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND is not set
-# CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER is not set
-CONFIG_MIPS_CMDLINE_FROM_DTB=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-CONFIG_MIPS_LD_CAN_LINK_VDSO=y
-# CONFIG_MIPS_NO_APPENDED_DTB is not set
-CONFIG_MIPS_RAW_APPENDED_DTB=y
-CONFIG_MIPS_SPRAM=y
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_CFI_I2 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-CONFIG_MTD_PARSER_CYBERTAN=y
-# CONFIG_MTD_PARSER_TPLINK_SAFELOADER is not set
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_SPLIT_ELF_FW=y
-CONFIG_MTD_SPLIT_LZMA_FW=y
-CONFIG_MTD_SPLIT_SEAMA_FW=y
-CONFIG_MTD_SPLIT_TPLINK_FW=y
-CONFIG_MTD_SPLIT_UIMAGE_FW=y
-CONFIG_MTD_SPLIT_WRGG_FW=y
-CONFIG_MTD_VIRT_CONCAT=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NET_SELFTESTS=y
-CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
-CONFIG_NVMEM=y
-CONFIG_NVMEM_LAYOUTS=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_PAGE_POOL=y
-CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
-CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
-CONFIG_PCI=y
-CONFIG_PCI_AR71XX=y
-CONFIG_PCI_AR724X=y
-CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DRIVERS_LEGACY=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-CONFIG_PHYLIB_LEDS=y
-# CONFIG_PHY_AR7100_USB is not set
-# CONFIG_PHY_AR7200_USB is not set
-# CONFIG_PHY_ATH79_USB is not set
-CONFIG_PINCTRL=y
-CONFIG_PREEMPT_NONE_BUILD=y
-CONFIG_PTP_1588_CLOCK_OPTIONAL=y
-CONFIG_QCOM_NET_PHYLIB=y
-CONFIG_RANDSTRUCT_NONE=y
-CONFIG_RATIONAL=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_REGULATOR=y
-CONFIG_RESET_ATH79=y
-CONFIG_RESET_CONTROLLER=y
-CONFIG_SERIAL_8250_NR_UARTS=1
-CONFIG_SERIAL_8250_RUNTIME_UARTS=1
-CONFIG_SERIAL_AR933X=y
-CONFIG_SERIAL_AR933X_CONSOLE=y
-CONFIG_SERIAL_AR933X_NR_UARTS=2
-CONFIG_SERIAL_MCTRL_GPIO=y
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SPI=y
-CONFIG_SPI_AR934X=y
-CONFIG_SPI_ATH79=y
-CONFIG_SPI_BITBANG=y
-CONFIG_SPI_GPIO=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_MEM=y
-# CONFIG_SPI_RB4XX is not set
-CONFIG_SRCU=y
-CONFIG_SWCONFIG=y
-CONFIG_SWCONFIG_LEDS=y
-CONFIG_SWPHY=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_SYS_SUPPORTS_MIPS16=y
-CONFIG_SYS_SUPPORTS_ZBOOT=y
-CONFIG_SYS_SUPPORTS_ZBOOT_UART_PROM=y
-CONFIG_TARGET_ISA_REV=2
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TINY_SRCU=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USE_OF=y
-CONFIG_ZBOOT_LOAD_ADDRESS=0x0
diff --git a/target/linux/ath79/patches-6.1/010-v6.4-gpio-ath79-Convert-to-immutable-irq_chip.patch b/target/linux/ath79/patches-6.1/010-v6.4-gpio-ath79-Convert-to-immutable-irq_chip.patch
deleted file mode 100644
index 942380fc7b..0000000000
--- a/target/linux/ath79/patches-6.1/010-v6.4-gpio-ath79-Convert-to-immutable-irq_chip.patch
+++ /dev/null
@@ -1,60 +0,0 @@
-From b11ce7e48121a02ceedec9f4dfcab4f2bee8f35f Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij at linaro.org>
-Date: Thu, 9 Mar 2023 08:45:54 +0100
-Subject: gpio: ath79: Convert to immutable irq_chip
-
-Convert the driver to immutable irq-chip with a bit of
-intuition.
-
-Cc: Marc Zyngier <maz at kernel.org>
-Acked-by: Marc Zyngier <maz at kernel.org>
-Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
-Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski at linaro.org>
----
- drivers/gpio/gpio-ath79.c | 8 ++++++--
- 1 file changed, 6 insertions(+), 2 deletions(-)
-
---- a/drivers/gpio/gpio-ath79.c
-+++ b/drivers/gpio/gpio-ath79.c
-@@ -71,6 +71,7 @@ static void ath79_gpio_irq_unmask(struct
- u32 mask = BIT(irqd_to_hwirq(data));
- unsigned long flags;
-
-+ gpiochip_enable_irq(&ctrl->gc, irqd_to_hwirq(data));
- raw_spin_lock_irqsave(&ctrl->lock, flags);
- ath79_gpio_update_bits(ctrl, AR71XX_GPIO_REG_INT_MASK, mask, mask);
- raw_spin_unlock_irqrestore(&ctrl->lock, flags);
-@@ -85,6 +86,7 @@ static void ath79_gpio_irq_mask(struct i
- raw_spin_lock_irqsave(&ctrl->lock, flags);
- ath79_gpio_update_bits(ctrl, AR71XX_GPIO_REG_INT_MASK, mask, 0);
- raw_spin_unlock_irqrestore(&ctrl->lock, flags);
-+ gpiochip_disable_irq(&ctrl->gc, irqd_to_hwirq(data));
- }
-
- static void ath79_gpio_irq_enable(struct irq_data *data)
-@@ -169,13 +171,15 @@ static int ath79_gpio_irq_set_type(struc
- return 0;
- }
-
--static struct irq_chip ath79_gpio_irqchip = {
-+static const struct irq_chip ath79_gpio_irqchip = {
- .name = "gpio-ath79",
- .irq_enable = ath79_gpio_irq_enable,
- .irq_disable = ath79_gpio_irq_disable,
- .irq_mask = ath79_gpio_irq_mask,
- .irq_unmask = ath79_gpio_irq_unmask,
- .irq_set_type = ath79_gpio_irq_set_type,
-+ .flags = IRQCHIP_IMMUTABLE,
-+ GPIOCHIP_IRQ_RESOURCE_HELPERS,
- };
-
- static void ath79_gpio_irq_handler(struct irq_desc *desc)
-@@ -274,7 +278,7 @@ static int ath79_gpio_probe(struct platf
- /* Optional interrupt setup */
- if (!np || of_property_read_bool(np, "interrupt-controller")) {
- girq = &ctrl->gc.irq;
-- girq->chip = &ath79_gpio_irqchip;
-+ gpio_irq_chip_set_chip(girq, &ath79_gpio_irqchip);
- girq->parent_handler = ath79_gpio_irq_handler;
- girq->num_parents = 1;
- girq->parents = devm_kcalloc(dev, 1, sizeof(*girq->parents),
diff --git a/target/linux/ath79/patches-6.1/100-reset-ath79-read-back-reset-register.patch b/target/linux/ath79/patches-6.1/100-reset-ath79-read-back-reset-register.patch
deleted file mode 100644
index 7aa501514d..0000000000
--- a/target/linux/ath79/patches-6.1/100-reset-ath79-read-back-reset-register.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From 661edfc3dab943a67c8821353b63cc23057f7ce9 Mon Sep 17 00:00:00 2001
-From: David Bauer <mail at david-bauer.net>
-Date: Tue, 9 Jan 2024 20:48:46 +0100
-Subject: [PATCH] reset: ath79: read back reset register
-
-Read back the reset register in order to flush the cache. This fixes
-spurious reboot hangs on TP-Link TL-WDR3600 and TL-WDR4300 with Zentel
-DRAM chips.
-
-This issue was fixed in the past, but switching to the reset-driver
-specific implementation removed the old fix.
-
-Link: https://github.com/freifunk-gluon/gluon/issues/2904
-Link: https://github.com/openwrt/openwrt/issues/13043
-Link: https://dev.archive.openwrt.org/ticket/17839
-Link: f8a7bfe1cb2c ("MIPS: ath79: fix system restart")
-
-Signed-off-by: David Bauer <mail at david-bauer.net>
----
- drivers/reset/reset-ath79.c | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/drivers/reset/reset-ath79.c
-+++ b/drivers/reset/reset-ath79.c
-@@ -37,6 +37,8 @@ static int ath79_reset_update(struct res
- else
- val &= ~BIT(id);
- writel(val, ath79_reset->base);
-+ /* Flush cache */
-+ readl(ath79_reset->base);
- spin_unlock_irqrestore(&ath79_reset->lock, flags);
-
- return 0;
diff --git a/target/linux/ath79/patches-6.1/300-irqchip-irq-ath79-intc-add-irq-cascade-driver-for-QC.patch b/target/linux/ath79/patches-6.1/300-irqchip-irq-ath79-intc-add-irq-cascade-driver-for-QC.patch
deleted file mode 100644
index ceda511c21..0000000000
--- a/target/linux/ath79/patches-6.1/300-irqchip-irq-ath79-intc-add-irq-cascade-driver-for-QC.patch
+++ /dev/null
@@ -1,168 +0,0 @@
-From f3eacff2310a60348a755c50a8da6fc251fc8587 Mon Sep 17 00:00:00 2001
-From: John Crispin <john at phrozen.org>
-Date: Tue, 6 Mar 2018 09:55:13 +0100
-Subject: [PATCH 07/33] irqchip/irq-ath79-intc: add irq cascade driver for
- QCA9556 SoCs
-
-Signed-off-by: John Crispin <john at phrozen.org>
----
- drivers/irqchip/Makefile | 1 +
- drivers/irqchip/irq-ath79-intc.c | 142 +++++++++++++++++++++++++++++++++++++++
- 2 files changed, 143 insertions(+)
- create mode 100644 drivers/irqchip/irq-ath79-intc.c
-
---- a/drivers/irqchip/Makefile
-+++ b/drivers/irqchip/Makefile
-@@ -4,6 +4,7 @@ obj-$(CONFIG_IRQCHIP) += irqchip.o
- obj-$(CONFIG_AL_FIC) += irq-al-fic.o
- obj-$(CONFIG_ALPINE_MSI) += irq-alpine-msi.o
- obj-$(CONFIG_ATH79) += irq-ath79-cpu.o
-+obj-$(CONFIG_ATH79) += irq-ath79-intc.o
- obj-$(CONFIG_ATH79) += irq-ath79-misc.o
- obj-$(CONFIG_ARCH_BCM2835) += irq-bcm2835.o
- obj-$(CONFIG_ARCH_BCM2835) += irq-bcm2836.o
---- /dev/null
-+++ b/drivers/irqchip/irq-ath79-intc.c
-@@ -0,0 +1,142 @@
-+/*
-+ * Atheros AR71xx/AR724x/AR913x specific interrupt handling
-+ *
-+ * Copyright (C) 2018 John Crispin <john at phrozen.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ */
-+
-+#include <linux/interrupt.h>
-+#include <linux/irqchip.h>
-+#include <linux/of.h>
-+#include <linux/of_irq.h>
-+#include <linux/irqdomain.h>
-+
-+#include <asm/irq_cpu.h>
-+#include <asm/mach-ath79/ath79.h>
-+#include <asm/mach-ath79/ar71xx_regs.h>
-+
-+#define ATH79_MAX_INTC_CASCADE 3
-+
-+struct ath79_intc {
-+ struct irq_chip chip;
-+ u32 irq;
-+ u32 pending_mask;
-+ u32 int_status;
-+ u32 irq_mask[ATH79_MAX_INTC_CASCADE];
-+ u32 irq_wb_chan[ATH79_MAX_INTC_CASCADE];
-+};
-+
-+static void ath79_intc_irq_handler(struct irq_desc *desc)
-+{
-+ struct irq_domain *domain = irq_desc_get_handler_data(desc);
-+ struct ath79_intc *intc = domain->host_data;
-+ u32 pending;
-+
-+ pending = ath79_reset_rr(intc->int_status);
-+ pending &= intc->pending_mask;
-+
-+ if (pending) {
-+ int i;
-+
-+ for (i = 0; i < domain->hwirq_max; i++)
-+ if (pending & intc->irq_mask[i]) {
-+ if (intc->irq_wb_chan[i] != 0xffffffff)
-+ ath79_ddr_wb_flush(intc->irq_wb_chan[i]);
-+ generic_handle_irq(irq_find_mapping(domain, i));
-+ }
-+ } else {
-+ spurious_interrupt();
-+ }
-+}
-+
-+static void ath79_intc_irq_enable(struct irq_data *d)
-+{
-+ struct ath79_intc *intc = d->domain->host_data;
-+ enable_irq(intc->irq);
-+}
-+
-+static void ath79_intc_irq_disable(struct irq_data *d)
-+{
-+ struct ath79_intc *intc = d->domain->host_data;
-+ disable_irq(intc->irq);
-+}
-+
-+static int ath79_intc_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw)
-+{
-+ struct ath79_intc *intc = d->host_data;
-+
-+ irq_set_chip_and_handler(irq, &intc->chip, handle_level_irq);
-+
-+ return 0;
-+}
-+
-+static const struct irq_domain_ops ath79_irq_domain_ops = {
-+ .xlate = irq_domain_xlate_onecell,
-+ .map = ath79_intc_map,
-+};
-+
-+static int __init ath79_intc_of_init(
-+ struct device_node *node, struct device_node *parent)
-+{
-+ struct irq_domain *domain;
-+ struct ath79_intc *intc;
-+ int cnt, cntwb, i, err;
-+
-+ cnt = of_property_count_u32_elems(node, "qca,pending-bits");
-+ if (cnt > ATH79_MAX_INTC_CASCADE)
-+ panic("Too many INTC pending bits\n");
-+
-+ intc = kzalloc(sizeof(*intc), GFP_KERNEL);
-+ if (!intc)
-+ panic("Failed to allocate INTC memory\n");
-+ intc->chip = dummy_irq_chip;
-+ intc->chip.name = "INTC";
-+ intc->chip.irq_disable = ath79_intc_irq_disable;
-+ intc->chip.irq_enable = ath79_intc_irq_enable;
-+
-+ if (of_property_read_u32(node, "qca,int-status-addr", &intc->int_status) < 0) {
-+ panic("Missing address of interrupt status register\n");
-+ }
-+
-+ of_property_read_u32_array(node, "qca,pending-bits", intc->irq_mask, cnt);
-+ for (i = 0; i < cnt; i++) {
-+ intc->pending_mask |= intc->irq_mask[i];
-+ intc->irq_wb_chan[i] = 0xffffffff;
-+ }
-+
-+ cntwb = of_count_phandle_with_args(
-+ node, "qca,ddr-wb-channels", "#qca,ddr-wb-channel-cells");
-+
-+ for (i = 0; i < cntwb; i++) {
-+ struct of_phandle_args args;
-+ u32 irq = i;
-+
-+ of_property_read_u32_index(
-+ node, "qca,ddr-wb-channel-interrupts", i, &irq);
-+ if (irq >= ATH79_MAX_INTC_CASCADE)
-+ continue;
-+
-+ err = of_parse_phandle_with_args(
-+ node, "qca,ddr-wb-channels",
-+ "#qca,ddr-wb-channel-cells",
-+ i, &args);
-+ if (err)
-+ return err;
-+
-+ intc->irq_wb_chan[irq] = args.args[0];
-+ }
-+
-+ intc->irq = irq_of_parse_and_map(node, 0);
-+ if (!intc->irq)
-+ panic("Failed to get INTC IRQ");
-+
-+ domain = irq_domain_add_linear(node, cnt, &ath79_irq_domain_ops, intc);
-+ irq_set_chained_handler_and_data(intc->irq, ath79_intc_irq_handler, domain);
-+
-+ return 0;
-+}
-+IRQCHIP_DECLARE(ath79_intc, "qca,ar9340-intc",
-+ ath79_intc_of_init);
diff --git a/target/linux/ath79/patches-6.1/301-irqchip-irq-ath79-cpu-drop-OF-init-helper.patch b/target/linux/ath79/patches-6.1/301-irqchip-irq-ath79-cpu-drop-OF-init-helper.patch
deleted file mode 100644
index 13117d9a8e..0000000000
--- a/target/linux/ath79/patches-6.1/301-irqchip-irq-ath79-cpu-drop-OF-init-helper.patch
+++ /dev/null
@@ -1,23 +0,0 @@
-From e029f998594f151008ecbfa024e2957edd2a5189 Mon Sep 17 00:00:00 2001
-From: John Crispin <john at phrozen.org>
-Date: Tue, 6 Mar 2018 09:58:19 +0100
-Subject: [PATCH 08/33] irqchip/irq-ath79-cpu: drop !OF init helper
-
-Signed-off-by: John Crispin <john at phrozen.org>
----
- drivers/irqchip/irq-ath79-cpu.c | 7 -------
- 1 file changed, 7 deletions(-)
-
---- a/drivers/irqchip/irq-ath79-cpu.c
-+++ b/drivers/irqchip/irq-ath79-cpu.c
-@@ -85,10 +85,3 @@ static int __init ar79_cpu_intc_of_init(
- }
- IRQCHIP_DECLARE(ar79_cpu_intc, "qca,ar7100-cpu-intc",
- ar79_cpu_intc_of_init);
--
--void __init ath79_cpu_irq_init(unsigned irq_wb_chan2, unsigned irq_wb_chan3)
--{
-- irq_wb_chan[2] = irq_wb_chan2;
-- irq_wb_chan[3] = irq_wb_chan3;
-- mips_cpu_irq_init();
--}
diff --git a/target/linux/ath79/patches-6.1/310-dt-bindings-PCI-qcom-ar7100-adds-binding-doc.patch b/target/linux/ath79/patches-6.1/310-dt-bindings-PCI-qcom-ar7100-adds-binding-doc.patch
deleted file mode 100644
index cf0a75c791..0000000000
--- a/target/linux/ath79/patches-6.1/310-dt-bindings-PCI-qcom-ar7100-adds-binding-doc.patch
+++ /dev/null
@@ -1,57 +0,0 @@
-From 4a4f869ec58ed8910b9b2e68d0eee50957e9bb20 Mon Sep 17 00:00:00 2001
-From: John Crispin <john at phrozen.org>
-Date: Mon, 25 Jun 2018 15:52:10 +0200
-Subject: [PATCH 17/33] dt-bindings: PCI: qcom,ar7100: adds binding doc
-
-With the driver being converted from platform_data to pure OF, we need to
-also add some docs.
-
-Cc: Rob Herring <robh+dt at kernel.org>
-Cc: devicetree at vger.kernel.org
-Signed-off-by: John Crispin <john at phrozen.org>
----
- .../devicetree/bindings/pci/qcom,ar7100-pci.txt | 38 ++++++++++++++++++++++
- 1 file changed, 38 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/pci/qcom,ar7100-pci.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/pci/qcom,ar7100-pci.txt
-@@ -0,0 +1,38 @@
-+* Qualcomm Atheros AR7100 PCI express root complex
-+
-+Required properties:
-+- compatible: should contain "qcom,ar7100-pci" to identify the core.
-+- reg: Should contain the register ranges as listed in the reg-names property.
-+- reg-names: Definition: Must include the following entries
-+ - "cfg_base" IO Memory
-+- #address-cells: set to <3>
-+- #size-cells: set to <2>
-+- ranges: ranges for the PCI memory and I/O regions
-+- interrupt-map-mask and interrupt-map: standard PCI
-+ properties to define the mapping of the PCIe interface to interrupt
-+ numbers.
-+- #interrupt-cells: set to <1>
-+- interrupt-controller: define to enable the builtin IRQ cascade.
-+
-+Optional properties:
-+- interrupt-parent: phandle to the MIPS IRQ controller
-+
-+* Example for ar7100
-+ pcie at 180c0000 {
-+ compatible = "qca,ar7100-pci";
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+ bus-range = <0x0 0x0>;
-+ reg = <0x17010000 0x100>;
-+ reg-names = "cfg_base";
-+ ranges = <0x2000000 0 0x10000000 0x10000000 0 0x07000000
-+ 0x1000000 0 0x00000000 0x00000000 0 0x00000001>;
-+ interrupt-parent = <&cpuintc>;
-+ interrupts = <2>;
-+
-+ interrupt-controller;
-+ #interrupt-cells = <1>;
-+
-+ interrupt-map-mask = <0 0 0 1>;
-+ interrupt-map = <0 0 0 0 &pcie0 0>;
-+ };
diff --git a/target/linux/ath79/patches-6.1/311-MIPS-pci-ar71xx-convert-to-OF.patch b/target/linux/ath79/patches-6.1/311-MIPS-pci-ar71xx-convert-to-OF.patch
deleted file mode 100644
index 9a315aed0b..0000000000
--- a/target/linux/ath79/patches-6.1/311-MIPS-pci-ar71xx-convert-to-OF.patch
+++ /dev/null
@@ -1,206 +0,0 @@
-From 1855ab6b1d27f5b38a648baf57ff6a534afec26d Mon Sep 17 00:00:00 2001
-From: John Crispin <john at phrozen.org>
-Date: Sat, 23 Jun 2018 15:07:23 +0200
-Subject: [PATCH 18/33] MIPS: pci-ar71xx: convert to OF
-
-With the ath79 target getting converted to pure OF, we can drop all the
-platform data code and add the missing OF bits to the driver. We also add
-a irq domain for the PCI/e controllers cascade, thus making it usable from
-dts files.
-
-Signed-off-by: John Crispin <john at phrozen.org>
----
- arch/mips/pci/pci-ar71xx.c | 82 +++++++++++++++++++++++-----------------------
- 1 file changed, 41 insertions(+), 41 deletions(-)
-
---- a/arch/mips/pci/pci-ar71xx.c
-+++ b/arch/mips/pci/pci-ar71xx.c
-@@ -15,8 +15,11 @@
- #include <linux/pci.h>
- #include <linux/pci_regs.h>
- #include <linux/interrupt.h>
-+#include <linux/irqchip/chained_irq.h>
- #include <linux/init.h>
- #include <linux/platform_device.h>
-+#include <linux/of_irq.h>
-+#include <linux/of_pci.h>
-
- #include <asm/mach-ath79/ar71xx_regs.h>
- #include <asm/mach-ath79/ath79.h>
-@@ -46,12 +49,13 @@
- #define AR71XX_PCI_IRQ_COUNT 5
-
- struct ar71xx_pci_controller {
-+ struct device_node *np;
- void __iomem *cfg_base;
- int irq;
-- int irq_base;
- struct pci_controller pci_ctrl;
- struct resource io_res;
- struct resource mem_res;
-+ struct irq_domain *domain;
- };
-
- /* Byte lane enable bits */
-@@ -225,29 +229,30 @@ static struct pci_ops ar71xx_pci_ops = {
-
- static void ar71xx_pci_irq_handler(struct irq_desc *desc)
- {
-- struct ar71xx_pci_controller *apc;
- void __iomem *base = ath79_reset_base;
-+ struct irq_chip *chip = irq_desc_get_chip(desc);
-+ struct ar71xx_pci_controller *apc = irq_desc_get_handler_data(desc);
- u32 pending;
-
-- apc = irq_desc_get_handler_data(desc);
--
-+ chained_irq_enter(chip, desc);
- pending = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_STATUS) &
- __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE);
-
- if (pending & AR71XX_PCI_INT_DEV0)
-- generic_handle_irq(apc->irq_base + 0);
-+ generic_handle_irq(irq_linear_revmap(apc->domain, 1));
-
- else if (pending & AR71XX_PCI_INT_DEV1)
-- generic_handle_irq(apc->irq_base + 1);
-+ generic_handle_irq(irq_linear_revmap(apc->domain, 2));
-
- else if (pending & AR71XX_PCI_INT_DEV2)
-- generic_handle_irq(apc->irq_base + 2);
-+ generic_handle_irq(irq_linear_revmap(apc->domain, 3));
-
- else if (pending & AR71XX_PCI_INT_CORE)
-- generic_handle_irq(apc->irq_base + 4);
-+ generic_handle_irq(irq_linear_revmap(apc->domain, 4));
-
- else
- spurious_interrupt();
-+ chained_irq_exit(chip, desc);
- }
-
- static void ar71xx_pci_irq_unmask(struct irq_data *d)
-@@ -258,7 +263,7 @@ static void ar71xx_pci_irq_unmask(struct
- u32 t;
-
- apc = irq_data_get_irq_chip_data(d);
-- irq = d->irq - apc->irq_base;
-+ irq = irq_linear_revmap(apc->domain, d->irq);
-
- t = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE);
- __raw_writel(t | (1 << irq), base + AR71XX_RESET_REG_PCI_INT_ENABLE);
-@@ -275,7 +280,7 @@ static void ar71xx_pci_irq_mask(struct i
- u32 t;
-
- apc = irq_data_get_irq_chip_data(d);
-- irq = d->irq - apc->irq_base;
-+ irq = irq_linear_revmap(apc->domain, d->irq);
-
- t = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE);
- __raw_writel(t & ~(1 << irq), base + AR71XX_RESET_REG_PCI_INT_ENABLE);
-@@ -291,24 +296,31 @@ static struct irq_chip ar71xx_pci_irq_ch
- .irq_mask_ack = ar71xx_pci_irq_mask,
- };
-
-+static int ar71xx_pci_irq_map(struct irq_domain *d,
-+ unsigned int irq, irq_hw_number_t hw)
-+{
-+ struct ar71xx_pci_controller *apc = d->host_data;
-+
-+ irq_set_chip_and_handler(irq, &ar71xx_pci_irq_chip, handle_level_irq);
-+ irq_set_chip_data(irq, apc);
-+
-+ return 0;
-+}
-+
-+static const struct irq_domain_ops ar71xx_pci_domain_ops = {
-+ .xlate = irq_domain_xlate_onecell,
-+ .map = ar71xx_pci_irq_map,
-+};
-+
- static void ar71xx_pci_irq_init(struct ar71xx_pci_controller *apc)
- {
- void __iomem *base = ath79_reset_base;
-- int i;
-
- __raw_writel(0, base + AR71XX_RESET_REG_PCI_INT_ENABLE);
- __raw_writel(0, base + AR71XX_RESET_REG_PCI_INT_STATUS);
-
-- BUILD_BUG_ON(ATH79_PCI_IRQ_COUNT < AR71XX_PCI_IRQ_COUNT);
--
-- apc->irq_base = ATH79_PCI_IRQ_BASE;
-- for (i = apc->irq_base;
-- i < apc->irq_base + AR71XX_PCI_IRQ_COUNT; i++) {
-- irq_set_chip_and_handler(i, &ar71xx_pci_irq_chip,
-- handle_level_irq);
-- irq_set_chip_data(i, apc);
-- }
--
-+ apc->domain = irq_domain_add_linear(apc->np, AR71XX_PCI_IRQ_COUNT,
-+ &ar71xx_pci_domain_ops, apc);
- irq_set_chained_handler_and_data(apc->irq, ar71xx_pci_irq_handler,
- apc);
- }
-@@ -325,10 +337,14 @@ static void ar71xx_pci_reset(void)
- mdelay(100);
- }
-
-+static const struct of_device_id ar71xx_pci_ids[] = {
-+ { .compatible = "qca,ar7100-pci" },
-+ {},
-+};
-+
- static int ar71xx_pci_probe(struct platform_device *pdev)
- {
- struct ar71xx_pci_controller *apc;
-- struct resource *res;
- u32 t;
-
- apc = devm_kzalloc(&pdev->dev, sizeof(struct ar71xx_pci_controller),
-@@ -345,26 +361,6 @@ static int ar71xx_pci_probe(struct platf
- if (apc->irq < 0)
- return -EINVAL;
-
-- res = platform_get_resource_byname(pdev, IORESOURCE_IO, "io_base");
-- if (!res)
-- return -EINVAL;
--
-- apc->io_res.parent = res;
-- apc->io_res.name = "PCI IO space";
-- apc->io_res.start = res->start;
-- apc->io_res.end = res->end;
-- apc->io_res.flags = IORESOURCE_IO;
--
-- res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mem_base");
-- if (!res)
-- return -EINVAL;
--
-- apc->mem_res.parent = res;
-- apc->mem_res.name = "PCI memory space";
-- apc->mem_res.start = res->start;
-- apc->mem_res.end = res->end;
-- apc->mem_res.flags = IORESOURCE_MEM;
--
- ar71xx_pci_reset();
-
- /* setup COMMAND register */
-@@ -377,9 +373,11 @@ static int ar71xx_pci_probe(struct platf
-
- ar71xx_pci_irq_init(apc);
-
-+ apc->np = pdev->dev.of_node;
- apc->pci_ctrl.pci_ops = &ar71xx_pci_ops;
- apc->pci_ctrl.mem_resource = &apc->mem_res;
- apc->pci_ctrl.io_resource = &apc->io_res;
-+ pci_load_of_ranges(&apc->pci_ctrl, pdev->dev.of_node);
-
- register_pci_controller(&apc->pci_ctrl);
-
-@@ -390,6 +388,7 @@ static struct platform_driver ar71xx_pci
- .probe = ar71xx_pci_probe,
- .driver = {
- .name = "ar71xx-pci",
-+ .of_match_table = of_match_ptr(ar71xx_pci_ids),
- },
- };
-
diff --git a/target/linux/ath79/patches-6.1/312-dt-bindings-PCI-qcom-ar7240-adds-binding-doc.patch b/target/linux/ath79/patches-6.1/312-dt-bindings-PCI-qcom-ar7240-adds-binding-doc.patch
deleted file mode 100644
index a32c9bdcde..0000000000
--- a/target/linux/ath79/patches-6.1/312-dt-bindings-PCI-qcom-ar7240-adds-binding-doc.patch
+++ /dev/null
@@ -1,61 +0,0 @@
-From ea27764bc3ef2a05decf3ae05edffc289cd0d93c Mon Sep 17 00:00:00 2001
-From: John Crispin <john at phrozen.org>
-Date: Mon, 25 Jun 2018 15:52:02 +0200
-Subject: [PATCH 19/33] dt-bindings: PCI: qcom,ar7240: adds binding doc
-
-With the driver being converted from platform_data to pure OF, we need to
-also add some docs.
-
-Cc: Rob Herring <robh+dt at kernel.org>
-Cc: devicetree at vger.kernel.org
-Signed-off-by: John Crispin <john at phrozen.org>
----
- .../devicetree/bindings/pci/qcom,ar7240-pci.txt | 42 ++++++++++++++++++++++
- 1 file changed, 42 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/pci/qcom,ar7240-pci.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/pci/qcom,ar7240-pci.txt
-@@ -0,0 +1,42 @@
-+* Qualcomm Atheros AR724X PCI express root complex
-+
-+Required properties:
-+- compatible: should contain "qcom,ar7240-pci" to identify the core.
-+- reg: Should contain the register ranges as listed in the reg-names property.
-+- reg-names: Definition: Must include the following entries
-+ - "crp_base" Configuration registers
-+ - "ctrl_base" Control registers
-+ - "cfg_base" IO Memory
-+- #address-cells: set to <3>
-+- #size-cells: set to <2>
-+- ranges: ranges for the PCI memory and I/O regions
-+- interrupt-map-mask and interrupt-map: standard PCI
-+ properties to define the mapping of the PCIe interface to interrupt
-+ numbers.
-+- #interrupt-cells: set to <1>
-+- interrupt-parent: phandle to the MIPS IRQ controller
-+
-+Optional properties:
-+- interrupt-controller: define to enable the builtin IRQ cascade.
-+
-+* Example for qca9557
-+ pcie at 180c0000 {
-+ compatible = "qcom,ar7240-pci";
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+ bus-range = <0x0 0x0>;
-+ reg = <0x180c0000 0x1000>,
-+ <0x180f0000 0x100>,
-+ <0x14000000 0x1000>;
-+ reg-names = "crp_base", "ctrl_base", "cfg_base";
-+ ranges = <0x2000000 0 0x10000000 0x10000000 0 0x04000000
-+ 0x1000000 0 0x00000000 0x00000000 0 0x00000001>;
-+ interrupt-parent = <&intc2>;
-+ interrupts = <1>;
-+
-+ interrupt-controller;
-+ #interrupt-cells = <1>;
-+
-+ interrupt-map-mask = <0 0 0 1>;
-+ interrupt-map = <0 0 0 0 &pcie0 0>;
-+ };
diff --git a/target/linux/ath79/patches-6.1/313-MIPS-pci-ar724x-convert-to-OF.patch b/target/linux/ath79/patches-6.1/313-MIPS-pci-ar724x-convert-to-OF.patch
deleted file mode 100644
index 7927c1cbf5..0000000000
--- a/target/linux/ath79/patches-6.1/313-MIPS-pci-ar724x-convert-to-OF.patch
+++ /dev/null
@@ -1,213 +0,0 @@
-From a522ee0199d5d3ea114ca2e211f6ac398d3e8e0b Mon Sep 17 00:00:00 2001
-From: John Crispin <john at phrozen.org>
-Date: Sat, 23 Jun 2018 15:07:37 +0200
-Subject: [PATCH 20/33] MIPS: pci-ar724x: convert to OF
-
-With the ath79 target getting converted to pure OF, we can drop all the
-platform data code and add the missing OF bits to the driver. We also add
-a irq domain for the PCI/e controllers cascade, thus making it usable from
-dts files.
-
-Signed-off-by: John Crispin <john at phrozen.org>
----
- arch/mips/pci/pci-ar724x.c | 88 ++++++++++++++++++++++------------------------
- 1 file changed, 42 insertions(+), 46 deletions(-)
-
---- a/arch/mips/pci/pci-ar724x.c
-+++ b/arch/mips/pci/pci-ar724x.c
-@@ -11,8 +11,11 @@
- #include <linux/init.h>
- #include <linux/delay.h>
- #include <linux/platform_device.h>
-+#include <linux/irqchip/chained_irq.h>
- #include <asm/mach-ath79/ath79.h>
- #include <asm/mach-ath79/ar71xx_regs.h>
-+#include <linux/of_irq.h>
-+#include <linux/of_pci.h>
-
- #define AR724X_PCI_REG_APP 0x00
- #define AR724X_PCI_REG_RESET 0x18
-@@ -42,17 +45,20 @@ struct ar724x_pci_controller {
- void __iomem *crp_base;
-
- int irq;
-- int irq_base;
-
- bool link_up;
- bool bar0_is_cached;
- u32 bar0_value;
-
-+ struct device_node *np;
- struct pci_controller pci_controller;
-+ struct irq_domain *domain;
- struct resource io_res;
- struct resource mem_res;
- };
-
-+static struct irq_chip ar724x_pci_irq_chip;
-+
- static inline bool ar724x_pci_check_link(struct ar724x_pci_controller *apc)
- {
- u32 reset;
-@@ -228,35 +234,31 @@ static struct pci_ops ar724x_pci_ops = {
-
- static void ar724x_pci_irq_handler(struct irq_desc *desc)
- {
-- struct ar724x_pci_controller *apc;
-- void __iomem *base;
-+ struct irq_chip *chip = irq_desc_get_chip(desc);
-+ struct ar724x_pci_controller *apc = irq_desc_get_handler_data(desc);
- u32 pending;
-
-- apc = irq_desc_get_handler_data(desc);
-- base = apc->ctrl_base;
--
-- pending = __raw_readl(base + AR724X_PCI_REG_INT_STATUS) &
-- __raw_readl(base + AR724X_PCI_REG_INT_MASK);
-+ chained_irq_enter(chip, desc);
-+ pending = __raw_readl(apc->ctrl_base + AR724X_PCI_REG_INT_STATUS) &
-+ __raw_readl(apc->ctrl_base + AR724X_PCI_REG_INT_MASK);
-
- if (pending & AR724X_PCI_INT_DEV0)
-- generic_handle_irq(apc->irq_base + 0);
--
-+ generic_handle_irq(irq_linear_revmap(apc->domain, 1));
- else
- spurious_interrupt();
-+ chained_irq_exit(chip, desc);
- }
-
- static void ar724x_pci_irq_unmask(struct irq_data *d)
- {
- struct ar724x_pci_controller *apc;
- void __iomem *base;
-- int offset;
- u32 t;
-
- apc = irq_data_get_irq_chip_data(d);
- base = apc->ctrl_base;
-- offset = apc->irq_base - d->irq;
-
-- switch (offset) {
-+ switch (irq_linear_revmap(apc->domain, d->irq)) {
- case 0:
- t = __raw_readl(base + AR724X_PCI_REG_INT_MASK);
- __raw_writel(t | AR724X_PCI_INT_DEV0,
-@@ -270,14 +272,12 @@ static void ar724x_pci_irq_mask(struct i
- {
- struct ar724x_pci_controller *apc;
- void __iomem *base;
-- int offset;
- u32 t;
-
- apc = irq_data_get_irq_chip_data(d);
- base = apc->ctrl_base;
-- offset = apc->irq_base - d->irq;
-
-- switch (offset) {
-+ switch (irq_linear_revmap(apc->domain, d->irq)) {
- case 0:
- t = __raw_readl(base + AR724X_PCI_REG_INT_MASK);
- __raw_writel(t & ~AR724X_PCI_INT_DEV0,
-@@ -302,26 +302,34 @@ static struct irq_chip ar724x_pci_irq_ch
- .irq_mask_ack = ar724x_pci_irq_mask,
- };
-
-+static int ar724x_pci_irq_map(struct irq_domain *d,
-+ unsigned int irq, irq_hw_number_t hw)
-+{
-+ struct ar724x_pci_controller *apc = d->host_data;
-+
-+ irq_set_chip_and_handler(irq, &ar724x_pci_irq_chip, handle_level_irq);
-+ irq_set_chip_data(irq, apc);
-+
-+ return 0;
-+}
-+
-+static const struct irq_domain_ops ar724x_pci_domain_ops = {
-+ .xlate = irq_domain_xlate_onecell,
-+ .map = ar724x_pci_irq_map,
-+};
-+
- static void ar724x_pci_irq_init(struct ar724x_pci_controller *apc,
- int id)
- {
- void __iomem *base;
-- int i;
-
- base = apc->ctrl_base;
-
- __raw_writel(0, base + AR724X_PCI_REG_INT_MASK);
- __raw_writel(0, base + AR724X_PCI_REG_INT_STATUS);
-
-- apc->irq_base = ATH79_PCI_IRQ_BASE + (id * AR724X_PCI_IRQ_COUNT);
--
-- for (i = apc->irq_base;
-- i < apc->irq_base + AR724X_PCI_IRQ_COUNT; i++) {
-- irq_set_chip_and_handler(i, &ar724x_pci_irq_chip,
-- handle_level_irq);
-- irq_set_chip_data(i, apc);
-- }
--
-+ apc->domain = irq_domain_add_linear(apc->np, 2,
-+ &ar724x_pci_domain_ops, apc);
- irq_set_chained_handler_and_data(apc->irq, ar724x_pci_irq_handler,
- apc);
- }
-@@ -360,7 +368,6 @@ static void ar724x_pci_hw_init(struct ar
- static int ar724x_pci_probe(struct platform_device *pdev)
- {
- struct ar724x_pci_controller *apc;
-- struct resource *res;
- int id;
-
- id = pdev->id;
-@@ -388,29 +395,11 @@ static int ar724x_pci_probe(struct platf
- if (apc->irq < 0)
- return -EINVAL;
-
-- res = platform_get_resource_byname(pdev, IORESOURCE_IO, "io_base");
-- if (!res)
-- return -EINVAL;
--
-- apc->io_res.parent = res;
-- apc->io_res.name = "PCI IO space";
-- apc->io_res.start = res->start;
-- apc->io_res.end = res->end;
-- apc->io_res.flags = IORESOURCE_IO;
--
-- res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mem_base");
-- if (!res)
-- return -EINVAL;
--
-- apc->mem_res.parent = res;
-- apc->mem_res.name = "PCI memory space";
-- apc->mem_res.start = res->start;
-- apc->mem_res.end = res->end;
-- apc->mem_res.flags = IORESOURCE_MEM;
--
-+ apc->np = pdev->dev.of_node;
- apc->pci_controller.pci_ops = &ar724x_pci_ops;
- apc->pci_controller.io_resource = &apc->io_res;
- apc->pci_controller.mem_resource = &apc->mem_res;
-+ pci_load_of_ranges(&apc->pci_controller, pdev->dev.of_node);
-
- /*
- * Do the full PCIE Root Complex Initialization Sequence if the PCIe
-@@ -432,10 +421,16 @@ static int ar724x_pci_probe(struct platf
- return 0;
- }
-
-+static const struct of_device_id ar724x_pci_ids[] = {
-+ { .compatible = "qcom,ar7240-pci" },
-+ {},
-+};
-+
- static struct platform_driver ar724x_pci_driver = {
- .probe = ar724x_pci_probe,
- .driver = {
- .name = "ar724x-pci",
-+ .of_match_table = of_match_ptr(ar724x_pci_ids),
- },
- };
-
diff --git a/target/linux/ath79/patches-6.1/314-MIPS-ath79-remove-irq-code-from-pci.patch b/target/linux/ath79/patches-6.1/314-MIPS-ath79-remove-irq-code-from-pci.patch
deleted file mode 100644
index 01549eec68..0000000000
--- a/target/linux/ath79/patches-6.1/314-MIPS-ath79-remove-irq-code-from-pci.patch
+++ /dev/null
@@ -1,149 +0,0 @@
-From: John Crispin <john at phrozen.org>
-Subject: ath79: fix remove irq code from pci driver patch
-
-This patch got mangled in the void while rebasing it.
-
-Submitted-by: John Crispin <john at phrozen.org>
----
- arch/mips/pci/pci-ar71xx.c | 107 ------------------
- 1 file changed, 141 deletions(-)
-
---- a/arch/mips/pci/pci-ar71xx.c
-+++ b/arch/mips/pci/pci-ar71xx.c
-@@ -51,11 +51,9 @@
- struct ar71xx_pci_controller {
- struct device_node *np;
- void __iomem *cfg_base;
-- int irq;
- struct pci_controller pci_ctrl;
- struct resource io_res;
- struct resource mem_res;
-- struct irq_domain *domain;
- };
-
- /* Byte lane enable bits */
-@@ -227,104 +225,6 @@ static struct pci_ops ar71xx_pci_ops = {
- .write = ar71xx_pci_write_config,
- };
-
--static void ar71xx_pci_irq_handler(struct irq_desc *desc)
--{
-- void __iomem *base = ath79_reset_base;
-- struct irq_chip *chip = irq_desc_get_chip(desc);
-- struct ar71xx_pci_controller *apc = irq_desc_get_handler_data(desc);
-- u32 pending;
--
-- chained_irq_enter(chip, desc);
-- pending = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_STATUS) &
-- __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE);
--
-- if (pending & AR71XX_PCI_INT_DEV0)
-- generic_handle_irq(irq_linear_revmap(apc->domain, 1));
--
-- else if (pending & AR71XX_PCI_INT_DEV1)
-- generic_handle_irq(irq_linear_revmap(apc->domain, 2));
--
-- else if (pending & AR71XX_PCI_INT_DEV2)
-- generic_handle_irq(irq_linear_revmap(apc->domain, 3));
--
-- else if (pending & AR71XX_PCI_INT_CORE)
-- generic_handle_irq(irq_linear_revmap(apc->domain, 4));
--
-- else
-- spurious_interrupt();
-- chained_irq_exit(chip, desc);
--}
--
--static void ar71xx_pci_irq_unmask(struct irq_data *d)
--{
-- struct ar71xx_pci_controller *apc;
-- unsigned int irq;
-- void __iomem *base = ath79_reset_base;
-- u32 t;
--
-- apc = irq_data_get_irq_chip_data(d);
-- irq = irq_linear_revmap(apc->domain, d->irq);
--
-- t = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE);
-- __raw_writel(t | (1 << irq), base + AR71XX_RESET_REG_PCI_INT_ENABLE);
--
-- /* flush write */
-- __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE);
--}
--
--static void ar71xx_pci_irq_mask(struct irq_data *d)
--{
-- struct ar71xx_pci_controller *apc;
-- unsigned int irq;
-- void __iomem *base = ath79_reset_base;
-- u32 t;
--
-- apc = irq_data_get_irq_chip_data(d);
-- irq = irq_linear_revmap(apc->domain, d->irq);
--
-- t = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE);
-- __raw_writel(t & ~(1 << irq), base + AR71XX_RESET_REG_PCI_INT_ENABLE);
--
-- /* flush write */
-- __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE);
--}
--
--static struct irq_chip ar71xx_pci_irq_chip = {
-- .name = "AR71XX PCI",
-- .irq_mask = ar71xx_pci_irq_mask,
-- .irq_unmask = ar71xx_pci_irq_unmask,
-- .irq_mask_ack = ar71xx_pci_irq_mask,
--};
--
--static int ar71xx_pci_irq_map(struct irq_domain *d,
-- unsigned int irq, irq_hw_number_t hw)
--{
-- struct ar71xx_pci_controller *apc = d->host_data;
--
-- irq_set_chip_and_handler(irq, &ar71xx_pci_irq_chip, handle_level_irq);
-- irq_set_chip_data(irq, apc);
--
-- return 0;
--}
--
--static const struct irq_domain_ops ar71xx_pci_domain_ops = {
-- .xlate = irq_domain_xlate_onecell,
-- .map = ar71xx_pci_irq_map,
--};
--
--static void ar71xx_pci_irq_init(struct ar71xx_pci_controller *apc)
--{
-- void __iomem *base = ath79_reset_base;
--
-- __raw_writel(0, base + AR71XX_RESET_REG_PCI_INT_ENABLE);
-- __raw_writel(0, base + AR71XX_RESET_REG_PCI_INT_STATUS);
--
-- apc->domain = irq_domain_add_linear(apc->np, AR71XX_PCI_IRQ_COUNT,
-- &ar71xx_pci_domain_ops, apc);
-- irq_set_chained_handler_and_data(apc->irq, ar71xx_pci_irq_handler,
-- apc);
--}
--
- static void ar71xx_pci_reset(void)
- {
- ath79_device_reset_set(AR71XX_RESET_PCI_BUS | AR71XX_RESET_PCI_CORE);
-@@ -357,10 +257,6 @@ static int ar71xx_pci_probe(struct platf
- if (IS_ERR(apc->cfg_base))
- return PTR_ERR(apc->cfg_base);
-
-- apc->irq = platform_get_irq(pdev, 0);
-- if (apc->irq < 0)
-- return -EINVAL;
--
- ar71xx_pci_reset();
-
- /* setup COMMAND register */
-@@ -371,8 +267,6 @@ static int ar71xx_pci_probe(struct platf
- /* clear bus errors */
- ar71xx_pci_check_error(apc, 1);
-
-- ar71xx_pci_irq_init(apc);
--
- apc->np = pdev->dev.of_node;
- apc->pci_ctrl.pci_ops = &ar71xx_pci_ops;
- apc->pci_ctrl.mem_resource = &apc->mem_res;
diff --git a/target/linux/ath79/patches-6.1/315-MIPS-pci-ar724x-add-QCA9550-reset-sequence.patch b/target/linux/ath79/patches-6.1/315-MIPS-pci-ar724x-add-QCA9550-reset-sequence.patch
deleted file mode 100644
index 375dec8ba2..0000000000
--- a/target/linux/ath79/patches-6.1/315-MIPS-pci-ar724x-add-QCA9550-reset-sequence.patch
+++ /dev/null
@@ -1,130 +0,0 @@
-From: David Bauer <mail at david-bauer.net>
-Date: Sat, 11 Apr 2020 14:03:12 +0200
-Subject: MIPS: pci-ar724x: add QCA9550 reset sequence
-
-The QCA9550 family of SoCs have a slightly different reset
-sequence compared to older chips.
-
-Normally the bootloader performs this sequence, however
-some bootloader implementation expect the operating system
-to clear the reset.
-
-Also get the resets from OF to support handling of the second
-PCIe root-complex on the QCA9558.
-
-Signed-off-by: David Bauer <mail at david-bauer.net>
-
---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-@@ -390,6 +390,7 @@
- #define QCA955X_PLL_CPU_CONFIG_REG 0x00
- #define QCA955X_PLL_DDR_CONFIG_REG 0x04
- #define QCA955X_PLL_CLK_CTRL_REG 0x08
-+#define QCA955X_PLL_PCIE_CONFIG_REG 0x0c
- #define QCA955X_PLL_ETH_XMII_CONTROL_REG 0x28
- #define QCA955X_PLL_ETH_SGMII_CONTROL_REG 0x48
- #define QCA955X_PLL_ETH_SGMII_SERDES_REG 0x4c
-@@ -475,6 +476,9 @@
- #define QCA956X_PLL_CLK_CTRL_CPU_DDRCLK_FROM_CPUPLL BIT(21)
- #define QCA956X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL BIT(24)
-
-+#define QCA955X_PLL_PCIE_CONFIG_PLL_PWD BIT(30)
-+#define QCA955X_PLL_PCIE_CONFIG_PLL_BYPASS BIT(16)
-+
- #define QCA956X_PLL_SWITCH_CLOCK_SPARE_I2C_CLK_SELB BIT(5)
- #define QCA956X_PLL_SWITCH_CLOCK_SPARE_MDIO_CLK_SEL0_1 BIT(6)
- #define QCA956X_PLL_SWITCH_CLOCK_SPARE_UART1_CLK_SEL BIT(7)
---- a/arch/mips/pci/pci-ar724x.c
-+++ b/arch/mips/pci/pci-ar724x.c
-@@ -8,6 +8,7 @@
-
- #include <linux/irq.h>
- #include <linux/pci.h>
-+#include <linux/reset.h>
- #include <linux/init.h>
- #include <linux/delay.h>
- #include <linux/platform_device.h>
-@@ -55,6 +56,9 @@ struct ar724x_pci_controller {
- struct irq_domain *domain;
- struct resource io_res;
- struct resource mem_res;
-+
-+ struct reset_control *hc_reset;
-+ struct reset_control *phy_reset;
- };
-
- static struct irq_chip ar724x_pci_irq_chip;
-@@ -340,18 +344,30 @@ static void ar724x_pci_hw_init(struct ar
- int wait = 0;
-
- /* deassert PCIe host controller and PCIe PHY reset */
-- ath79_device_reset_clear(AR724X_RESET_PCIE);
-- ath79_device_reset_clear(AR724X_RESET_PCIE_PHY);
-+ reset_control_deassert(apc->hc_reset);
-+ reset_control_deassert(apc->phy_reset);
-
-- /* remove the reset of the PCIE PLL */
-- ppl = ath79_pll_rr(AR724X_PLL_REG_PCIE_CONFIG);
-- ppl &= ~AR724X_PLL_REG_PCIE_CONFIG_PPL_RESET;
-- ath79_pll_wr(AR724X_PLL_REG_PCIE_CONFIG, ppl);
--
-- /* deassert bypass for the PCIE PLL */
-- ppl = ath79_pll_rr(AR724X_PLL_REG_PCIE_CONFIG);
-- ppl &= ~AR724X_PLL_REG_PCIE_CONFIG_PPL_BYPASS;
-- ath79_pll_wr(AR724X_PLL_REG_PCIE_CONFIG, ppl);
-+ if (of_device_is_compatible(apc->np, "qcom,qca9550-pci")) {
-+ /* remove the reset of the PCIE PLL */
-+ ppl = ath79_pll_rr(QCA955X_PLL_PCIE_CONFIG_REG);
-+ ppl &= ~QCA955X_PLL_PCIE_CONFIG_PLL_PWD;
-+ ath79_pll_wr(QCA955X_PLL_PCIE_CONFIG_REG, ppl);
-+
-+ /* deassert bypass for the PCIE PLL */
-+ ppl = ath79_pll_rr(QCA955X_PLL_PCIE_CONFIG_REG);
-+ ppl &= ~QCA955X_PLL_PCIE_CONFIG_PLL_BYPASS;
-+ ath79_pll_wr(QCA955X_PLL_PCIE_CONFIG_REG, ppl);
-+ } else {
-+ /* remove the reset of the PCIE PLL */
-+ ppl = ath79_pll_rr(AR724X_PLL_REG_PCIE_CONFIG);
-+ ppl &= ~AR724X_PLL_REG_PCIE_CONFIG_PPL_RESET;
-+ ath79_pll_wr(AR724X_PLL_REG_PCIE_CONFIG, ppl);
-+
-+ /* deassert bypass for the PCIE PLL */
-+ ppl = ath79_pll_rr(AR724X_PLL_REG_PCIE_CONFIG);
-+ ppl &= ~AR724X_PLL_REG_PCIE_CONFIG_PPL_BYPASS;
-+ ath79_pll_wr(AR724X_PLL_REG_PCIE_CONFIG, ppl);
-+ }
-
- /* set PCIE Application Control to ready */
- app = __raw_readl(apc->ctrl_base + AR724X_PCI_REG_APP);
-@@ -395,6 +411,14 @@ static int ar724x_pci_probe(struct platf
- if (apc->irq < 0)
- return -EINVAL;
-
-+ apc->hc_reset = devm_reset_control_get_exclusive(&pdev->dev, "hc");
-+ if (IS_ERR(apc->hc_reset))
-+ return PTR_ERR(apc->hc_reset);
-+
-+ apc->phy_reset = devm_reset_control_get_exclusive(&pdev->dev, "phy");
-+ if (IS_ERR(apc->phy_reset))
-+ return PTR_ERR(apc->phy_reset);
-+
- apc->np = pdev->dev.of_node;
- apc->pci_controller.pci_ops = &ar724x_pci_ops;
- apc->pci_controller.io_resource = &apc->io_res;
-@@ -405,7 +429,7 @@ static int ar724x_pci_probe(struct platf
- * Do the full PCIE Root Complex Initialization Sequence if the PCIe
- * host controller is in reset.
- */
-- if (ath79_reset_rr(AR724X_RESET_REG_RESET_MODULE) & AR724X_RESET_PCIE)
-+ if (reset_control_status(apc->hc_reset))
- ar724x_pci_hw_init(apc);
-
- apc->link_up = ar724x_pci_check_link(apc);
-@@ -423,6 +447,7 @@ static int ar724x_pci_probe(struct platf
-
- static const struct of_device_id ar724x_pci_ids[] = {
- { .compatible = "qcom,ar7240-pci" },
-+ { .compatible = "qcom,qca9550-pci" },
- {},
- };
-
diff --git a/target/linux/ath79/patches-6.1/316-MIPS-ath79-swizzle-pci-address-for-ar71xx.patch b/target/linux/ath79/patches-6.1/316-MIPS-ath79-swizzle-pci-address-for-ar71xx.patch
deleted file mode 100644
index 1e2715b84c..0000000000
--- a/target/linux/ath79/patches-6.1/316-MIPS-ath79-swizzle-pci-address-for-ar71xx.patch
+++ /dev/null
@@ -1,109 +0,0 @@
-From: Gabor Juhos <juhosg at openwrt.org>
-Subject: [PATCH] ar71xx: swizzle address for PCI byte/word access on AR71xx
-
-Closes #11683.
-
-SVN-Revision: 32639
----
- .../mips/include/asm/mach-ath79/mangle-port.h | 111 ++++++++++++++++++
- 1 file changed, 111 insertions(+)
- create mode 100644 arch/mips/include/asm/mach-ath79/mangle-port.h
-
---- /dev/null
-+++ b/arch/mips/include/asm/mach-ath79/mangle-port.h
-@@ -0,0 +1,37 @@
-+/*
-+ * Copyright (C) 2012 Gabor Juhos <juhosg at openwrt.org>
-+ *
-+ * This file was derived from: inlude/asm-mips/mach-generic/mangle-port.h
-+ * Copyright (C) 2003, 2004 Ralf Baechle
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ */
-+
-+#ifndef __ASM_MACH_ATH79_MANGLE_PORT_H
-+#define __ASM_MACH_ATH79_MANGLE_PORT_H
-+
-+#ifdef CONFIG_PCI_AR71XX
-+extern unsigned long (ath79_pci_swizzle_b)(unsigned long port);
-+extern unsigned long (ath79_pci_swizzle_w)(unsigned long port);
-+#else
-+#define ath79_pci_swizzle_b(port) (port)
-+#define ath79_pci_swizzle_w(port) (port)
-+#endif
-+
-+#define __swizzle_addr_b(port) ath79_pci_swizzle_b(port)
-+#define __swizzle_addr_w(port) ath79_pci_swizzle_w(port)
-+#define __swizzle_addr_l(port) (port)
-+#define __swizzle_addr_q(port) (port)
-+
-+# define ioswabb(a, x) (x)
-+# define __mem_ioswabb(a, x) (x)
-+# define ioswabw(a, x) (x)
-+# define __mem_ioswabw(a, x) cpu_to_le16(x)
-+# define ioswabl(a, x) (x)
-+# define __mem_ioswabl(a, x) cpu_to_le32(x)
-+# define ioswabq(a, x) (x)
-+# define __mem_ioswabq(a, x) cpu_to_le64(x)
-+
-+#endif /* __ASM_MACH_ATH79_MANGLE_PORT_H */
---- a/arch/mips/pci/pci-ar71xx.c
-+++ b/arch/mips/pci/pci-ar71xx.c
-@@ -68,6 +68,45 @@ static const u32 ar71xx_pci_read_mask[8]
- 0, 0xff, 0xffff, 0, 0xffffffff, 0, 0, 0
- };
-
-+static unsigned long (*__ath79_pci_swizzle_b)(unsigned long port);
-+static unsigned long (*__ath79_pci_swizzle_w)(unsigned long port);
-+
-+static inline bool ar71xx_is_pci_addr(unsigned long port)
-+{
-+ unsigned long phys = CPHYSADDR(port);
-+
-+ return (phys >= AR71XX_PCI_MEM_BASE &&
-+ phys < AR71XX_PCI_MEM_BASE + AR71XX_PCI_MEM_SIZE);
-+}
-+
-+static unsigned long ar71xx_pci_swizzle_b(unsigned long port)
-+{
-+ return ar71xx_is_pci_addr(port) ? port ^ 3 : port;
-+}
-+
-+static unsigned long ar71xx_pci_swizzle_w(unsigned long port)
-+{
-+ return ar71xx_is_pci_addr(port) ? port ^ 2 : port;
-+}
-+
-+unsigned long ath79_pci_swizzle_b(unsigned long port)
-+{
-+ if (__ath79_pci_swizzle_b)
-+ return __ath79_pci_swizzle_b(port);
-+
-+ return port;
-+}
-+EXPORT_SYMBOL(ath79_pci_swizzle_b);
-+
-+unsigned long ath79_pci_swizzle_w(unsigned long port)
-+{
-+ if (__ath79_pci_swizzle_w)
-+ return __ath79_pci_swizzle_w(port);
-+
-+ return port;
-+}
-+EXPORT_SYMBOL(ath79_pci_swizzle_w);
-+
- static inline u32 ar71xx_pci_get_ble(int where, int size, int local)
- {
- u32 t;
-@@ -275,6 +314,9 @@ static int ar71xx_pci_probe(struct platf
-
- register_pci_controller(&apc->pci_ctrl);
-
-+ __ath79_pci_swizzle_b = ar71xx_pci_swizzle_b;
-+ __ath79_pci_swizzle_w = ar71xx_pci_swizzle_w;
-+
- return 0;
- }
-
diff --git a/target/linux/ath79/patches-6.1/330-missing-registers.patch b/target/linux/ath79/patches-6.1/330-missing-registers.patch
deleted file mode 100644
index 74789437ec..0000000000
--- a/target/linux/ath79/patches-6.1/330-missing-registers.patch
+++ /dev/null
@@ -1,20 +0,0 @@
-From: Christian Lamparter <chunkeey at gmail.com>
-Subject: [PATCH] ath79: gmac: add parsers for rxd(v)- and tx(d|en)-delay for
-
- ath79: gmac: add parsers for rxd(v)- and tx(d|en)-delay for AR9344
-
- Signed-off-by: Christian Lamparter <chunkeey at gmail.com>
-
---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-@@ -1231,6 +1231,10 @@
- #define AR934X_ETH_CFG_RDV_DELAY BIT(16)
- #define AR934X_ETH_CFG_RDV_DELAY_MASK 0x3
- #define AR934X_ETH_CFG_RDV_DELAY_SHIFT 16
-+#define AR934X_ETH_CFG_TXD_DELAY_MASK 0x3
-+#define AR934X_ETH_CFG_TXD_DELAY_SHIFT 18
-+#define AR934X_ETH_CFG_TXE_DELAY_MASK 0x3
-+#define AR934X_ETH_CFG_TXE_DELAY_SHIFT 20
-
- /*
- * QCA953X GMAC Interface
diff --git a/target/linux/ath79/patches-6.1/331-MIPS-ath79-add-missing-QCA955x-GMAC-registers.patch b/target/linux/ath79/patches-6.1/331-MIPS-ath79-add-missing-QCA955x-GMAC-registers.patch
deleted file mode 100644
index c2f228dfe1..0000000000
--- a/target/linux/ath79/patches-6.1/331-MIPS-ath79-add-missing-QCA955x-GMAC-registers.patch
+++ /dev/null
@@ -1,90 +0,0 @@
-From 60efe35257b063ce584968f9f80b437030ce6ba6 Mon Sep 17 00:00:00 2001
-From: David Bauer <mail at david-bauer.net>
-Date: Mon, 18 Mar 2019 00:54:06 +0100
-Subject: [PATCH] MIPS: ath79: add missing QCA955x GMAC registers
-
-This adds missing GMAC register definitions for the Qualcomm Atheros
-QCA955X series MIPS SoCs.
-
-They originate from the platforms U-Boot code and the AVM FRITZ!WLAN
-Repeater 450E's GPL tarball.
-
-Signed-off-by: David Bauer <mail at david-bauer.net>
----
- .../mips/include/asm/mach-ath79/ar71xx_regs.h | 54 +++++++++++++++++++
- 1 file changed, 54 insertions(+)
-
---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-@@ -1251,7 +1251,12 @@
- */
-
- #define QCA955X_GMAC_REG_ETH_CFG 0x00
-+#define QCA955X_GMAC_REG_SGMII_RESET 0x14
- #define QCA955X_GMAC_REG_SGMII_SERDES 0x18
-+#define QCA955X_GMAC_REG_MR_AN_CONTROL 0x1c
-+#define QCA955X_GMAC_REG_MR_AN_STATUS 0x20
-+#define QCA955X_GMAC_REG_SGMII_CONFIG 0x34
-+#define QCA955X_GMAC_REG_SGMII_DEBUG 0x58
-
- #define QCA955X_ETH_CFG_RGMII_EN BIT(0)
- #define QCA955X_ETH_CFG_MII_GE0 BIT(1)
-@@ -1273,9 +1278,58 @@
- #define QCA955X_ETH_CFG_TXE_DELAY_MASK 0x3
- #define QCA955X_ETH_CFG_TXE_DELAY_SHIFT 20
-
-+#define QCA955X_SGMII_RESET_RX_CLK_N_RESET 0
-+#define QCA955X_SGMII_RESET_RX_CLK_N BIT(0)
-+#define QCA955X_SGMII_RESET_TX_CLK_N BIT(1)
-+#define QCA955X_SGMII_RESET_RX_125M_N BIT(2)
-+#define QCA955X_SGMII_RESET_TX_125M_N BIT(3)
-+#define QCA955X_SGMII_RESET_HW_RX_125M_N BIT(4)
-+
- #define QCA955X_SGMII_SERDES_LOCK_DETECT_STATUS BIT(15)
- #define QCA955X_SGMII_SERDES_RES_CALIBRATION_SHIFT 23
- #define QCA955X_SGMII_SERDES_RES_CALIBRATION_MASK 0xf
-+
-+#define QCA955X_MR_AN_CONTROL_SPEED_SEL1 BIT(6)
-+#define QCA955X_MR_AN_CONTROL_DUPLEX_MODE BIT(8)
-+#define QCA955X_MR_AN_CONTROL_RESTART_AN BIT(9)
-+#define QCA955X_MR_AN_CONTROL_POWER_DOWN BIT(11)
-+#define QCA955X_MR_AN_CONTROL_AN_ENABLE BIT(12)
-+#define QCA955X_MR_AN_CONTROL_SPEED_SEL0 BIT(13)
-+#define QCA955X_MR_AN_CONTROL_LOOPBACK BIT(14)
-+#define QCA955X_MR_AN_CONTROL_PHY_RESET BIT(15)
-+
-+#define QCA955X_MR_AN_STATUS_EXT_CAP BIT(0)
-+#define QCA955X_MR_AN_STATUS_LINK_UP BIT(2)
-+#define QCA955X_MR_AN_STATUS_AN_ABILITY BIT(3)
-+#define QCA955X_MR_AN_STATUS_REMOTE_FAULT BIT(4)
-+#define QCA955X_MR_AN_STATUS_AN_COMPLETE BIT(5)
-+#define QCA955X_MR_AN_STATUS_NO_PREAMBLE BIT(6)
-+#define QCA955X_MR_AN_STATUS_BASE_PAGE BIT(7)
-+
-+#define QCA955X_SGMII_CONFIG_MODE_CTRL_SHIFT 0
-+#define QCA955X_SGMII_CONFIG_MODE_CTRL_MASK 0x7
-+#define QCA955X_SGMII_CONFIG_ENABLE_SGMII_TX_PAUSE BIT(3)
-+#define QCA955X_SGMII_CONFIG_MR_REG4_CHANGED BIT(4)
-+#define QCA955X_SGMII_CONFIG_FORCE_SPEED BIT(5)
-+#define QCA955X_SGMII_CONFIG_SPEED_SHIFT 6
-+#define QCA955X_SGMII_CONFIG_SPEED_MASK 0xc0
-+#define QCA955X_SGMII_CONFIG_REMOTE_PHY_LOOPBACK BIT(8)
-+#define QCA955X_SGMII_CONFIG_NEXT_PAGE_LOADED BIT(9)
-+#define QCA955X_SGMII_CONFIG_MDIO_ENABLE BIT(10)
-+#define QCA955X_SGMII_CONFIG_MDIO_PULSE BIT(11)
-+#define QCA955X_SGMII_CONFIG_MDIO_COMPLETE BIT(12)
-+#define QCA955X_SGMII_CONFIG_PRBS_ENABLE BIT(13)
-+#define QCA955X_SGMII_CONFIG_BERT_ENABLE BIT(14)
-+
-+#define QCA955X_SGMII_DEBUG_TX_STATE_MASK 0xff
-+#define QCA955X_SGMII_DEBUG_TX_STATE_SHIFT 0
-+#define QCA955X_SGMII_DEBUG_RX_STATE_MASK 0xff00
-+#define QCA955X_SGMII_DEBUG_RX_STATE_SHIFT 8
-+#define QCA955X_SGMII_DEBUG_RX_SYNC_STATE_MASK 0xff0000
-+#define QCA955X_SGMII_DEBUG_RX_SYNC_STATE_SHIFT 16
-+#define QCA955X_SGMII_DEBUG_ARB_STATE_MASK 0xf000000
-+#define QCA955X_SGMII_DEBUG_ARB_STATE_SHIFT 24
-+
- /*
- * QCA956X GMAC Interface
- */
diff --git a/target/linux/ath79/patches-6.1/332-ath79-sgmii-config.patch b/target/linux/ath79/patches-6.1/332-ath79-sgmii-config.patch
deleted file mode 100644
index a6a50e4a8a..0000000000
--- a/target/linux/ath79/patches-6.1/332-ath79-sgmii-config.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From: David Bauer <mail at david-bauer.net>
-Subject: [PATCH] ath79: force SGMII SerDes mode to MAC operation
-
-The mode on the SGMII SerDes on the QCA9563 is 1000 Base-X by default.
-This only allows for 1000 Mbit/s links, however when used with an SGMII
-PHY in 100 Mbit/s link mode, the link remains dead.
-
-This strictly has nothing to do with the SerDes calibration, however it
-is done at the same point in the QCA reference U-Boot which is the
-blueprint for everything happening here. As the current state is more or
-less a hack, this should be fine.
-
-This fixes the issues outlined above on a TP-Link EAP-225 Outdoor.
-
-Reported-by: Tom Herbers <freifunk at tomherbers.de>
-Tested-by: Tom Herbers <freifunk at tomherbers.de>
-Submitted-by: David Bauer <mail at david-bauer.net>
----
- arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 1 +
- 1 files changed, 1 insertion(+)
-
---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-@@ -1380,5 +1380,6 @@
-
- #define QCA956X_SGMII_CONFIG_MODE_CTRL_SHIFT 0
- #define QCA956X_SGMII_CONFIG_MODE_CTRL_MASK 0x7
-+#define QCA956X_SGMII_CONFIG_MODE_CTRL_SGMII_MAC 0x2
-
- #endif /* __ASM_MACH_AR71XX_REGS_H */
diff --git a/target/linux/ath79/patches-6.1/340-register_gpio_driver_earlier.patch b/target/linux/ath79/patches-6.1/340-register_gpio_driver_earlier.patch
deleted file mode 100644
index 48ce7e1d71..0000000000
--- a/target/linux/ath79/patches-6.1/340-register_gpio_driver_earlier.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From: John Crispin <john at phrozen.org>
-Subject: ath79: Register GPIO driver earlier
-
-HACK: register the GPIO driver earlier to ensure that gpio_request calls
-from mach files succeed.
-
-Submitted-by: John Crispin <john at phrozen.org>
----
- drivers/gpio/gpio-ath79.c | 6 +++++-
- 1 file changed, 5 insertions(+), 1 deletion(-)
-
---- a/drivers/gpio/gpio-ath79.c
-+++ b/drivers/gpio/gpio-ath79.c
-@@ -301,7 +301,11 @@ static struct platform_driver ath79_gpio
- .probe = ath79_gpio_probe,
- };
-
--module_platform_driver(ath79_gpio_driver);
-+static int __init ath79_gpio_init(void)
-+{
-+ return platform_driver_register(&ath79_gpio_driver);
-+}
-+postcore_initcall(ath79_gpio_init);
-
- MODULE_DESCRIPTION("Atheros AR71XX/AR724X/AR913X GPIO API support");
- MODULE_LICENSE("GPL v2");
diff --git a/target/linux/ath79/patches-6.1/350-MIPS-ath79-ath9k-exports.patch b/target/linux/ath79/patches-6.1/350-MIPS-ath79-ath9k-exports.patch
deleted file mode 100644
index e460fe58f3..0000000000
--- a/target/linux/ath79/patches-6.1/350-MIPS-ath79-ath9k-exports.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From: John Crispin <john at phrozen.org>
-Subject: [PATCH] ath79: make ahb wifi work
-
-Submitted-by: John Crispin <john at phrozen.org>
----
- arch/mips/ath79/common.c | 3 +++
- mips/include/asm/mach-ath79/ath79.h | 1+
- 1 file changed, 4 insertions(+)
-
---- a/arch/mips/ath79/common.c
-+++ b/arch/mips/ath79/common.c
-@@ -31,11 +31,13 @@ EXPORT_SYMBOL_GPL(ath79_ddr_freq);
-
- enum ath79_soc_type ath79_soc;
- unsigned int ath79_soc_rev;
-+EXPORT_SYMBOL_GPL(ath79_soc_rev);
-
- void __iomem *ath79_pll_base;
- void __iomem *ath79_reset_base;
- EXPORT_SYMBOL_GPL(ath79_reset_base);
--static void __iomem *ath79_ddr_base;
-+void __iomem *ath79_ddr_base;
-+EXPORT_SYMBOL_GPL(ath79_ddr_base);
- static void __iomem *ath79_ddr_wb_flush_base;
- static void __iomem *ath79_ddr_pci_win_base;
-
---- a/arch/mips/include/asm/mach-ath79/ath79.h
-+++ b/arch/mips/include/asm/mach-ath79/ath79.h
-@@ -149,6 +149,7 @@ void ath79_ddr_wb_flush(unsigned int reg
- void ath79_ddr_set_pci_windows(void);
-
- extern void __iomem *ath79_pll_base;
-+extern void __iomem *ath79_ddr_base;
- extern void __iomem *ath79_reset_base;
-
- static inline void ath79_pll_wr(unsigned reg, u32 val)
diff --git a/target/linux/ath79/patches-6.1/351-MIPS-ath79-common-exports.patch b/target/linux/ath79/patches-6.1/351-MIPS-ath79-common-exports.patch
deleted file mode 100644
index befcf2d50f..0000000000
--- a/target/linux/ath79/patches-6.1/351-MIPS-ath79-common-exports.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From: Luiz Angelo Daros de Luca <luizluca at gmail.com>
-Subject: [PATCH] ath79: export ath79_pll_base
-
-This symbol is declared as extern but nobody exported it.
-Any module including arch/mips/include/asm/mach-ath79/ath79.h
-will not build. Without this export, ag71xx.ko will not build
-as a module and the build will fail like this:
-
-ERROR: modpost: "ath79_pll_base" [drivers/net/ethernet/atheros/ag71xx/ag71xx.ko] undefined!
-
-The ath79_pll_base symbol is accessed in the ath79_pll_wr() inline function.
-
----
- arch/mips/ath79/common.c | 1 +
- 1 file changed, 1 insertions(+)
-
---- a/arch/mips/ath79/common.c
-+++ b/arch/mips/ath79/common.c
-@@ -34,6 +34,7 @@ unsigned int ath79_soc_rev;
- EXPORT_SYMBOL_GPL(ath79_soc_rev);
-
- void __iomem *ath79_pll_base;
-+EXPORT_SYMBOL_GPL(ath79_pll_base);
- void __iomem *ath79_reset_base;
- EXPORT_SYMBOL_GPL(ath79_reset_base);
- void __iomem *ath79_ddr_base;
diff --git a/target/linux/ath79/patches-6.1/360-MIPS-ath79-export-UART1-reference-clock.patch b/target/linux/ath79/patches-6.1/360-MIPS-ath79-export-UART1-reference-clock.patch
deleted file mode 100644
index b24ff21692..0000000000
--- a/target/linux/ath79/patches-6.1/360-MIPS-ath79-export-UART1-reference-clock.patch
+++ /dev/null
@@ -1,67 +0,0 @@
-From: Daniel Golle <daniel at makrotopia.org>
-Subject: [PATCH] ath79: add support for Atheros AR934x HS UART
-
-AR934x chips also got the 'old' qca,ar9330-uart in addition to the
-'new' ns16550a compatible one. Add support for UART1 clock selector as
-well as device-tree bindings in ar934x.dtsi to make use of that uart.
-
-Reported-by: Piotr Dymacz <pepe2k at gmail.com>
-Submitted-by: Daniel Golle <daniel at makrotopia.org>
----
- arch/mips/ath79/clock.c | 7 +++++++
- .../mips/include/asm/mach-ath79/ar71xx_regs.h | 1 +
- include/dt-bindings/clock/ath79-clk.h | 3 ++-
- 3 files changed, 10 insertions(+), 1 deletion(-)
-
---- a/arch/mips/ath79/clock.c
-+++ b/arch/mips/ath79/clock.c
-@@ -40,6 +40,7 @@ static const char * const clk_names[ATH7
- [ATH79_CLK_AHB] = "ahb",
- [ATH79_CLK_REF] = "ref",
- [ATH79_CLK_MDIO] = "mdio",
-+ [ATH79_CLK_UART1] = "uart1",
- };
-
- static const char * __init ath79_clk_name(int type)
-@@ -344,6 +345,9 @@ static void __init ar934x_clocks_init(vo
- if (clk_ctrl & AR934X_PLL_SWITCH_CLOCK_CONTROL_MDIO_CLK_SEL)
- ath79_set_clk(ATH79_CLK_MDIO, 100 * 1000 * 1000);
-
-+ if (clk_ctrl & AR934X_PLL_SWITCH_CLOCK_CONTROL_UART1_CLK_SEL)
-+ ath79_set_clk(ATH79_CLK_UART1, 100 * 1000 * 1000);
-+
- iounmap(dpll_base);
- }
-
-@@ -649,6 +653,9 @@ static void __init ath79_clocks_init_dt(
- if (!clks[ATH79_CLK_MDIO])
- clks[ATH79_CLK_MDIO] = clks[ATH79_CLK_REF];
-
-+ if (!clks[ATH79_CLK_UART1])
-+ clks[ATH79_CLK_UART1] = clks[ATH79_CLK_REF];
-+
- if (of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data)) {
- pr_err("%pOF: could not register clk provider\n", np);
- goto err_iounmap;
---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-@@ -348,6 +348,7 @@
- #define AR934X_PLL_CPU_DDR_CLK_CTRL_AHBCLK_FROM_DDRPLL BIT(24)
-
- #define AR934X_PLL_SWITCH_CLOCK_CONTROL_MDIO_CLK_SEL BIT(6)
-+#define AR934X_PLL_SWITCH_CLOCK_CONTROL_UART1_CLK_SEL BIT(7)
-
- #define QCA953X_PLL_CPU_CONFIG_REG 0x00
- #define QCA953X_PLL_DDR_CONFIG_REG 0x04
---- a/include/dt-bindings/clock/ath79-clk.h
-+++ b/include/dt-bindings/clock/ath79-clk.h
-@@ -11,7 +11,8 @@
- #define ATH79_CLK_AHB 2
- #define ATH79_CLK_REF 3
- #define ATH79_CLK_MDIO 4
-+#define ATH79_CLK_UART1 5
-
--#define ATH79_CLK_END 5
-+#define ATH79_CLK_END 6
-
- #endif /* __DT_BINDINGS_ATH79_CLK_H */
diff --git a/target/linux/ath79/patches-6.1/370-MIPS-ath79-sanitize-symbols.patch b/target/linux/ath79/patches-6.1/370-MIPS-ath79-sanitize-symbols.patch
deleted file mode 100644
index eac17c2b50..0000000000
--- a/target/linux/ath79/patches-6.1/370-MIPS-ath79-sanitize-symbols.patch
+++ /dev/null
@@ -1,93 +0,0 @@
-From 3fc8585cf76022dba7496627074d42af88c30718 Mon Sep 17 00:00:00 2001
-From: John Crispin <john at phrozen.org>
-Date: Sat, 23 Jun 2018 15:16:55 +0200
-Subject: [PATCH 32/33] MIPS: ath79: sanitize symbols
-
-We no longer need to select which SoCs are supported as the whole arch
-code is always built. So lets drop all the SoC symbols
-
-Signed-off-by: John Crispin <john at phrozen.org>
----
- arch/mips/Kconfig | 2 ++
- arch/mips/ath79/Kconfig | 44 +++++---------------------------------------
- arch/mips/pci/Makefile | 2 +-
- 3 files changed, 8 insertions(+), 40 deletions(-)
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -257,6 +257,8 @@ config ATH79
- select SYS_SUPPORTS_BIG_ENDIAN
- select SYS_SUPPORTS_MIPS16
- select SYS_SUPPORTS_ZBOOT_UART_PROM
-+ select HAVE_PCI
-+ select USB_ARCH_HAS_EHCI
- select USE_OF
- select USB_EHCI_ROOT_HUB_TT if USB_EHCI_HCD_PLATFORM
- help
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -1,48 +1,14 @@
- # SPDX-License-Identifier: GPL-2.0
- if ATH79
-
--config SOC_AR71XX
-- select HAVE_PCI
-- def_bool n
--
--config SOC_AR724X
-- select HAVE_PCI
-- select PCI_AR724X if PCI
-- def_bool n
--
--config SOC_AR913X
-- def_bool n
--
--config SOC_AR933X
-- def_bool n
--
--config SOC_AR934X
-- select HAVE_PCI
-- select PCI_AR724X if PCI
-- def_bool n
--
--config SOC_QCA955X
-- select HAVE_PCI
-- select PCI_AR724X if PCI
-+config PCI_AR71XX
-+ bool "PCI support for AR7100 type SoCs"
-+ depends on PCI
- def_bool n
-
- config PCI_AR724X
-- def_bool n
--
--config ATH79_DEV_GPIO_BUTTONS
-- def_bool n
--
--config ATH79_DEV_LEDS_GPIO
-- def_bool n
--
--config ATH79_DEV_SPI
-- def_bool n
--
--config ATH79_DEV_USB
-- def_bool n
--
--config ATH79_DEV_WMAC
-- depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X || SOC_QCA955X)
-+ bool "PCI support for AR724x type SoCs"
-+ depends on PCI
- def_bool n
-
- endif
---- a/arch/mips/pci/Makefile
-+++ b/arch/mips/pci/Makefile
-@@ -19,7 +19,7 @@ obj-$(CONFIG_BCM63XX) += pci-bcm63xx.o
- ops-bcm63xx.o
- obj-$(CONFIG_MIPS_ALCHEMY) += pci-alchemy.o
- obj-$(CONFIG_PCI_AR2315) += pci-ar2315.o
--obj-$(CONFIG_SOC_AR71XX) += pci-ar71xx.o
-+obj-$(CONFIG_PCI_AR71XX) += pci-ar71xx.o
- obj-$(CONFIG_PCI_AR724X) += pci-ar724x.o
- obj-$(CONFIG_PCI_XTALK_BRIDGE) += pci-xtalk-bridge.o
- #
diff --git a/target/linux/ath79/patches-6.1/400-mtd-nor-support-mtd-name-from-device-tree.patch b/target/linux/ath79/patches-6.1/400-mtd-nor-support-mtd-name-from-device-tree.patch
deleted file mode 100644
index ebb240d4ae..0000000000
--- a/target/linux/ath79/patches-6.1/400-mtd-nor-support-mtd-name-from-device-tree.patch
+++ /dev/null
@@ -1,53 +0,0 @@
-From f32bc2aa01edcba2f2ed5db151cf183eac9ef919 Mon Sep 17 00:00:00 2001
-From: Abhimanyu Vishwakarma <Abhimanyu.Vishwakarma at imgtec.com>
-Date: Sat, 25 Feb 2017 16:42:50 +0000
-Subject: mtd: nor: support mtd name from device tree
-
-Signed-off-by: Abhimanyu Vishwakarma <Abhimanyu.Vishwakarma at imgtec.com>
----
- drivers/mtd/spi-nor/spi-nor.c | 8 +++++++-
- 1 file changed, 7 insertions(+), 1 deletion(-)
-
---- a/drivers/mtd/spi-nor/core.c
-+++ b/drivers/mtd/spi-nor/core.c
-@@ -2964,12 +2964,19 @@ static void spi_nor_set_mtd_info(struct
- {
- struct mtd_info *mtd = &nor->mtd;
- struct device *dev = nor->dev;
-+ struct device_node *np = spi_nor_get_flash_node(nor);
-+ const char __maybe_unused *of_mtd_name = NULL;
-
- spi_nor_set_mtd_locking_ops(nor);
- spi_nor_set_mtd_otp_ops(nor);
-
- mtd->dev.parent = dev;
-- if (!mtd->name)
-+#ifdef CONFIG_MTD_OF_PARTS
-+ of_property_read_string(np, "linux,mtd-name", &of_mtd_name);
-+#endif
-+ if (of_mtd_name)
-+ mtd->name = of_mtd_name;
-+ else if (!mtd->name)
- mtd->name = dev_name(dev);
- mtd->type = MTD_NORFLASH;
- mtd->flags = MTD_CAP_NORFLASH;
---- a/drivers/mtd/mtdcore.c
-+++ b/drivers/mtd/mtdcore.c
-@@ -863,6 +863,17 @@ out_error:
- */
- static void mtd_set_dev_defaults(struct mtd_info *mtd)
- {
-+#ifdef CONFIG_MTD_OF_PARTS
-+ const char __maybe_unused *of_mtd_name = NULL;
-+ struct device_node *np;
-+
-+ np = mtd_get_of_node(mtd);
-+ if (np && !mtd->name) {
-+ of_property_read_string(np, "linux,mtd-name", &of_mtd_name);
-+ if (of_mtd_name)
-+ mtd->name = of_mtd_name;
-+ } else
-+#endif
- if (mtd->dev.parent) {
- if (!mtd->owner && mtd->dev.parent->driver)
- mtd->owner = mtd->dev.parent->driver->owner;
diff --git a/target/linux/ath79/patches-6.1/410-mtd-cybertan-trx-parser.patch b/target/linux/ath79/patches-6.1/410-mtd-cybertan-trx-parser.patch
deleted file mode 100644
index d0e8aec0d5..0000000000
--- a/target/linux/ath79/patches-6.1/410-mtd-cybertan-trx-parser.patch
+++ /dev/null
@@ -1,45 +0,0 @@
-From: Christian Lamparter <chunkeey at gmail.com>
-Subject: [PATCH] ath79: port cybertan_part from ar71xx
-
-This patch ports the cybertan_part code from ar71xx and converts the
-driver to a DT-supported mtd parser. As a result, it will no longer
-add the u-boot, nvram and art partitions, which were never part of
-the special Cybertan header.
-
-Instead these partitions have to be specified in the DT, which has the
-upside of making it possible to add properties (i.e.: read-only), labels
-and references to these important partitions.
-
-Submitted-by: Christian Lamparter <chunkeey at gmail.com>
----
- drivers/mtd/parsers/Makefile | 1 +
- drivers/mtd/parsers/Kconfig | 8 ++++++++
- 2 files changed, 9 insertions(+)
-
---- a/drivers/mtd/parsers/Makefile
-+++ b/drivers/mtd/parsers/Makefile
-@@ -9,6 +9,7 @@ obj-$(CONFIG_MTD_OF_PARTS) += ofpart.o
- ofpart-y += ofpart_core.o
- ofpart-$(CONFIG_MTD_OF_PARTS_BCM4908) += ofpart_bcm4908.o
- ofpart-$(CONFIG_MTD_OF_PARTS_LINKSYS_NS)+= ofpart_linksys_ns.o
-+obj-$(CONFIG_MTD_PARSER_CYBERTAN) += parser_cybertan.o
- obj-$(CONFIG_MTD_PARSER_IMAGETAG) += parser_imagetag.o
- obj-$(CONFIG_MTD_AFS_PARTS) += afs.o
- obj-$(CONFIG_MTD_PARSER_TPLINK_SAFELOADER) += tplink_safeloader.o
---- a/drivers/mtd/parsers/Kconfig
-+++ b/drivers/mtd/parsers/Kconfig
-@@ -112,6 +112,14 @@ config MTD_OF_PARTS_LINKSYS_NS
- two "firmware" partitions. Currently used firmware has to be detected
- using CFE environment variable.
-
-+config MTD_PARSER_CYBERTAN
-+ tristate "Parser for Cybertan format partitions"
-+ depends on MTD && (ATH79 || COMPILE_TEST)
-+ help
-+ Cybertan has a proprietory header than encompasses a Broadcom trx
-+ header. This driver will parse the header and take care of the
-+ special offsets that result in the extra headers.
-+
- config MTD_PARSER_IMAGETAG
- tristate "Parser for BCM963XX Image Tag format partitions"
- depends on BCM63XX || BMIPS_GENERIC || COMPILE_TEST
diff --git a/target/linux/ath79/patches-6.1/420-drivers-link-spi-before-mtd.patch b/target/linux/ath79/patches-6.1/420-drivers-link-spi-before-mtd.patch
deleted file mode 100644
index 0cd96909eb..0000000000
--- a/target/linux/ath79/patches-6.1/420-drivers-link-spi-before-mtd.patch
+++ /dev/null
@@ -1,20 +0,0 @@
-From: Gabor Juhos <juhosg at openwrt.org>
-Subject: [PATCH] ar71xx: Link SPI before MTD
-
-SVN-Revision: 22863
----
- drivers/Makefile | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/Makefile
-+++ b/drivers/Makefile
-@@ -80,8 +80,8 @@ obj-y += scsi/
- obj-y += nvme/
- obj-$(CONFIG_ATA) += ata/
- obj-$(CONFIG_TARGET_CORE) += target/
--obj-$(CONFIG_MTD) += mtd/
- obj-$(CONFIG_SPI) += spi/
-+obj-$(CONFIG_MTD) += mtd/
- obj-$(CONFIG_SPMI) += spmi/
- obj-$(CONFIG_HSI) += hsi/
- obj-$(CONFIG_SLIMBUS) += slimbus/
diff --git a/target/linux/ath79/patches-6.1/430-mtd-ar934x-nand-driver.patch b/target/linux/ath79/patches-6.1/430-mtd-ar934x-nand-driver.patch
deleted file mode 100644
index 184c39d469..0000000000
--- a/target/linux/ath79/patches-6.1/430-mtd-ar934x-nand-driver.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From: Gabor Juhos <juhosg at openwrt.org>
-Subject: ar71xx: ar934x_nfc: experimental NAND Flash Controller driver for AR934x
-
-SVN-Revision: 33385
----
- drivers/mtd/nand/raw/Kconfig | 8 ++++++++
- drivers/mtd/nand/raw/Makefile | 1 +
- 2 files changed, 9 insertions(+)
-
---- a/drivers/mtd/nand/raw/Kconfig
-+++ b/drivers/mtd/nand/raw/Kconfig
-@@ -557,4 +557,12 @@ config MTD_NAND_DISKONCHIP_BBTWRITE
- load time (assuming you build diskonchip as a module) with the module
- parameter "inftl_bbt_write=1".
-
-+config MTD_NAND_AR934X
-+ tristate "Support for NAND controller on Qualcomm Atheros AR934x/QCA955x SoCs"
-+ depends on ATH79 || COMPILE_TEST
-+ depends on HAS_IOMEM
-+ help
-+ Enables support for NAND controller on Qualcomm Atheros SoCs.
-+ This controller is found on AR934x and QCA955x SoCs.
-+
- endif # MTD_RAW_NAND
---- a/drivers/mtd/nand/raw/Makefile
-+++ b/drivers/mtd/nand/raw/Makefile
-@@ -59,6 +59,7 @@ obj-$(CONFIG_MTD_NAND_INTEL_LGM) += inte
- obj-$(CONFIG_MTD_NAND_ROCKCHIP) += rockchip-nand-controller.o
- obj-$(CONFIG_MTD_NAND_PL35X) += pl35x-nand-controller.o
- obj-$(CONFIG_MTD_NAND_RENESAS) += renesas-nand-controller.o
-+obj-$(CONFIG_MTD_NAND_AR934X) += ar934x_nand.o
-
- nand-objs := nand_base.o nand_legacy.o nand_bbt.o nand_timings.o nand_ids.o
- nand-objs += nand_onfi.o
diff --git a/target/linux/ath79/patches-6.1/700-phy-add-ath79-usb-phys.patch b/target/linux/ath79/patches-6.1/700-phy-add-ath79-usb-phys.patch
deleted file mode 100644
index 21b655a109..0000000000
--- a/target/linux/ath79/patches-6.1/700-phy-add-ath79-usb-phys.patch
+++ /dev/null
@@ -1,333 +0,0 @@
-From 08c9d6ceef01893678a5d2e8a15517c745417f21 Mon Sep 17 00:00:00 2001
-From: John Crispin <john at phrozen.org>
-Date: Tue, 6 Mar 2018 10:04:05 +0100
-Subject: [PATCH 04/27] phy: add ath79 usb phys
-
-Signed-off-by: John Crispin <john at phrozen.org>
----
- drivers/phy/Kconfig | 16 ++++++
- drivers/phy/Makefile | 2 +
- drivers/phy/phy-ar7100-usb.c | 124 +++++++++++++++++++++++++++++++++++++++++++
- drivers/phy/phy-ar7200-usb.c | 108 +++++++++++++++++++++++++++++++++++++
- 4 files changed, 250 insertions(+)
- create mode 100644 drivers/phy/phy-ar7100-usb.c
- create mode 100644 drivers/phy/phy-ar7200-usb.c
-
---- a/drivers/phy/Kconfig
-+++ b/drivers/phy/Kconfig
-@@ -24,6 +24,22 @@ config GENERIC_PHY_MIPI_DPHY
- Provides a number of helpers a core functions for MIPI D-PHY
- drivers to us.
-
-+config PHY_AR7100_USB
-+ tristate "Atheros AR7100 USB PHY driver"
-+ depends on ATH79 || COMPILE_TEST
-+ default y if USB_EHCI_HCD_PLATFORM
-+ select GENERIC_PHY
-+ help
-+ Enable this to support the USB PHY on Atheros AR7100 SoCs.
-+
-+config PHY_AR7200_USB
-+ tristate "Atheros AR7200 USB PHY driver"
-+ depends on ATH79 || COMPILE_TEST
-+ default y if USB_EHCI_HCD_PLATFORM
-+ select GENERIC_PHY
-+ help
-+ Enable this to support the USB PHY on Atheros AR7200 SoCs.
-+
- config PHY_LPC18XX_USB_OTG
- tristate "NXP LPC18xx/43xx SoC USB OTG PHY driver"
- depends on OF && (ARCH_LPC18XX || COMPILE_TEST)
---- a/drivers/phy/Makefile
-+++ b/drivers/phy/Makefile
-@@ -4,6 +4,8 @@
- #
-
- obj-$(CONFIG_GENERIC_PHY) += phy-core.o
-+obj-$(CONFIG_PHY_AR7100_USB) += phy-ar7100-usb.o
-+obj-$(CONFIG_PHY_AR7200_USB) += phy-ar7200-usb.o
- obj-$(CONFIG_GENERIC_PHY_MIPI_DPHY) += phy-core-mipi-dphy.o
- obj-$(CONFIG_PHY_CAN_TRANSCEIVER) += phy-can-transceiver.o
- obj-$(CONFIG_PHY_LPC18XX_USB_OTG) += phy-lpc18xx-usb-otg.o
---- /dev/null
-+++ b/drivers/phy/phy-ar7100-usb.c
-@@ -0,0 +1,140 @@
-+/*
-+ * Copyright (C) 2018 John Crispin <john at phrozen.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/phy/phy.h>
-+#include <linux/delay.h>
-+#include <linux/reset.h>
-+#include <linux/of_gpio.h>
-+
-+#include <asm/mach-ath79/ath79.h>
-+#include <asm/mach-ath79/ar71xx_regs.h>
-+
-+struct ar7100_usb_phy {
-+ struct reset_control *rst_phy;
-+ struct reset_control *rst_host;
-+ struct reset_control *rst_ohci_dll;
-+ void __iomem *io_base;
-+ struct phy *phy;
-+ int gpio;
-+};
-+
-+static int ar7100_usb_phy_power_off(struct phy *phy)
-+{
-+ struct ar7100_usb_phy *priv = phy_get_drvdata(phy);
-+ int err = 0;
-+
-+ err |= reset_control_assert(priv->rst_host);
-+ err |= reset_control_assert(priv->rst_phy);
-+ err |= reset_control_assert(priv->rst_ohci_dll);
-+
-+ return err;
-+}
-+
-+static int ar7100_usb_phy_power_on(struct phy *phy)
-+{
-+ struct ar7100_usb_phy *priv = phy_get_drvdata(phy);
-+ int err = 0;
-+
-+ err |= ar7100_usb_phy_power_off(phy);
-+ mdelay(100);
-+ err |= reset_control_deassert(priv->rst_ohci_dll);
-+ err |= reset_control_deassert(priv->rst_phy);
-+ err |= reset_control_deassert(priv->rst_host);
-+ mdelay(500);
-+ iowrite32(0xf0000, priv->io_base + AR71XX_USB_CTRL_REG_CONFIG);
-+ iowrite32(0x20c00, priv->io_base + AR71XX_USB_CTRL_REG_FLADJ);
-+
-+ return err;
-+}
-+
-+static const struct phy_ops ar7100_usb_phy_ops = {
-+ .power_on = ar7100_usb_phy_power_on,
-+ .power_off = ar7100_usb_phy_power_off,
-+ .owner = THIS_MODULE,
-+};
-+
-+static int ar7100_usb_phy_probe(struct platform_device *pdev)
-+{
-+ struct phy_provider *phy_provider;
-+ struct resource *res;
-+ struct ar7100_usb_phy *priv;
-+
-+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
-+ if (!priv)
-+ return -ENOMEM;
-+
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ priv->io_base = devm_ioremap_resource(&pdev->dev, res);
-+ if (IS_ERR(priv->io_base))
-+ return PTR_ERR(priv->io_base);
-+
-+ priv->rst_phy = devm_reset_control_get(&pdev->dev, "usb-phy");
-+ if (IS_ERR(priv->rst_phy)) {
-+ dev_err(&pdev->dev, "phy reset is missing\n");
-+ return PTR_ERR(priv->rst_phy);
-+ }
-+
-+ priv->rst_host = devm_reset_control_get(&pdev->dev, "usb-host");
-+ if (IS_ERR(priv->rst_host)) {
-+ dev_err(&pdev->dev, "host reset is missing\n");
-+ return PTR_ERR(priv->rst_host);
-+ }
-+
-+ priv->rst_ohci_dll = devm_reset_control_get(&pdev->dev, "usb-ohci-dll");
-+ if (IS_ERR(priv->rst_ohci_dll)) {
-+ dev_err(&pdev->dev, "ohci-dll reset is missing\n");
-+ return PTR_ERR(priv->rst_host);
-+ }
-+
-+ priv->phy = devm_phy_create(&pdev->dev, NULL, &ar7100_usb_phy_ops);
-+ if (IS_ERR(priv->phy)) {
-+ dev_err(&pdev->dev, "failed to create PHY\n");
-+ return PTR_ERR(priv->phy);
-+ }
-+
-+ priv->gpio = of_get_gpio(pdev->dev.of_node, 0);
-+ if (priv->gpio >= 0) {
-+ int ret = devm_gpio_request(&pdev->dev, priv->gpio, dev_name(&pdev->dev));
-+
-+ if (ret) {
-+ dev_err(&pdev->dev, "failed to request gpio\n");
-+ return ret;
-+ }
-+ gpio_export_with_name(priv->gpio, 0, dev_name(&pdev->dev));
-+ gpio_set_value(priv->gpio, 1);
-+ }
-+
-+ phy_set_drvdata(priv->phy, priv);
-+
-+ phy_provider = devm_of_phy_provider_register(&pdev->dev, of_phy_simple_xlate);
-+
-+
-+ return PTR_ERR_OR_ZERO(phy_provider);
-+}
-+
-+static const struct of_device_id ar7100_usb_phy_of_match[] = {
-+ { .compatible = "qca,ar7100-usb-phy" },
-+ {}
-+};
-+MODULE_DEVICE_TABLE(of, ar7100_usb_phy_of_match);
-+
-+static struct platform_driver ar7100_usb_phy_driver = {
-+ .probe = ar7100_usb_phy_probe,
-+ .driver = {
-+ .of_match_table = ar7100_usb_phy_of_match,
-+ .name = "ar7100-usb-phy",
-+ }
-+};
-+module_platform_driver(ar7100_usb_phy_driver);
-+
-+MODULE_DESCRIPTION("ATH79 USB PHY driver");
-+MODULE_AUTHOR("Alban Bedel <albeu at free.fr>");
-+MODULE_LICENSE("GPL");
---- /dev/null
-+++ b/drivers/phy/phy-ar7200-usb.c
-@@ -0,0 +1,136 @@
-+/*
-+ * Copyright (C) 2015 Alban Bedel <albeu at free.fr>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/phy/phy.h>
-+#include <linux/reset.h>
-+#include <linux/of_gpio.h>
-+
-+struct ar7200_usb_phy {
-+ struct reset_control *rst_phy;
-+ struct reset_control *rst_phy_analog;
-+ struct reset_control *suspend_override;
-+ struct phy *phy;
-+ int gpio;
-+};
-+
-+static int ar7200_usb_phy_power_on(struct phy *phy)
-+{
-+ struct ar7200_usb_phy *priv = phy_get_drvdata(phy);
-+ int err = 0;
-+
-+ if (priv->suspend_override)
-+ err = reset_control_assert(priv->suspend_override);
-+ if (priv->rst_phy)
-+ err |= reset_control_deassert(priv->rst_phy);
-+ if (priv->rst_phy_analog)
-+ err |= reset_control_deassert(priv->rst_phy_analog);
-+
-+ return err;
-+}
-+
-+static int ar7200_usb_phy_power_off(struct phy *phy)
-+{
-+ struct ar7200_usb_phy *priv = phy_get_drvdata(phy);
-+ int err = 0;
-+
-+ if (priv->suspend_override)
-+ err = reset_control_deassert(priv->suspend_override);
-+ if (priv->rst_phy)
-+ err |= reset_control_assert(priv->rst_phy);
-+ if (priv->rst_phy_analog)
-+ err |= reset_control_assert(priv->rst_phy_analog);
-+
-+ return err;
-+}
-+
-+static const struct phy_ops ar7200_usb_phy_ops = {
-+ .power_on = ar7200_usb_phy_power_on,
-+ .power_off = ar7200_usb_phy_power_off,
-+ .owner = THIS_MODULE,
-+};
-+
-+static int ar7200_usb_phy_probe(struct platform_device *pdev)
-+{
-+ struct phy_provider *phy_provider;
-+ struct ar7200_usb_phy *priv;
-+
-+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
-+ if (!priv)
-+ return -ENOMEM;
-+
-+ priv->rst_phy = devm_reset_control_get(&pdev->dev, "usb-phy");
-+ if (IS_ERR(priv->rst_phy)) {
-+ if (PTR_ERR(priv->rst_phy) != -EPROBE_DEFER)
-+ dev_err(&pdev->dev, "phy reset is missing\n");
-+ return PTR_ERR(priv->rst_phy);
-+ }
-+
-+ priv->rst_phy_analog = devm_reset_control_get_optional(
-+ &pdev->dev, "usb-phy-analog");
-+ if (IS_ERR(priv->rst_phy_analog)) {
-+ if (PTR_ERR(priv->rst_phy_analog) == -ENOENT)
-+ priv->rst_phy_analog = NULL;
-+ else
-+ return PTR_ERR(priv->rst_phy_analog);
-+ }
-+
-+ priv->suspend_override = devm_reset_control_get_optional(
-+ &pdev->dev, "usb-suspend-override");
-+ if (IS_ERR(priv->suspend_override)) {
-+ if (PTR_ERR(priv->suspend_override) == -ENOENT)
-+ priv->suspend_override = NULL;
-+ else
-+ return PTR_ERR(priv->suspend_override);
-+ }
-+
-+ priv->phy = devm_phy_create(&pdev->dev, NULL, &ar7200_usb_phy_ops);
-+ if (IS_ERR(priv->phy)) {
-+ dev_err(&pdev->dev, "failed to create PHY\n");
-+ return PTR_ERR(priv->phy);
-+ }
-+
-+ priv->gpio = of_get_gpio(pdev->dev.of_node, 0);
-+ if (priv->gpio >= 0) {
-+ int ret = devm_gpio_request(&pdev->dev, priv->gpio, dev_name(&pdev->dev));
-+
-+ if (ret) {
-+ dev_err(&pdev->dev, "failed to request gpio\n");
-+ return ret;
-+ }
-+ gpio_export_with_name(priv->gpio, 0, dev_name(&pdev->dev));
-+ gpio_set_value(priv->gpio, 1);
-+ }
-+
-+ phy_set_drvdata(priv->phy, priv);
-+
-+ phy_provider = devm_of_phy_provider_register(&pdev->dev, of_phy_simple_xlate);
-+
-+ return PTR_ERR_OR_ZERO(phy_provider);
-+}
-+
-+static const struct of_device_id ar7200_usb_phy_of_match[] = {
-+ { .compatible = "qca,ar7200-usb-phy" },
-+ {}
-+};
-+MODULE_DEVICE_TABLE(of, ar7200_usb_phy_of_match);
-+
-+static struct platform_driver ar7200_usb_phy_driver = {
-+ .probe = ar7200_usb_phy_probe,
-+ .driver = {
-+ .of_match_table = ar7200_usb_phy_of_match,
-+ .name = "ar7200-usb-phy",
-+ }
-+};
-+module_platform_driver(ar7200_usb_phy_driver);
-+
-+MODULE_DESCRIPTION("ATH79 USB PHY driver");
-+MODULE_AUTHOR("Alban Bedel <albeu at free.fr>");
-+MODULE_LICENSE("GPL");
diff --git a/target/linux/ath79/patches-6.1/701-usb-add-more-OF-quirk-properties.patch b/target/linux/ath79/patches-6.1/701-usb-add-more-OF-quirk-properties.patch
deleted file mode 100644
index 293a359884..0000000000
--- a/target/linux/ath79/patches-6.1/701-usb-add-more-OF-quirk-properties.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-From 2201818e5bd33f389beceb3943fdfcf5a698fc5b Mon Sep 17 00:00:00 2001
-From: John Crispin <john at phrozen.org>
-Date: Tue, 6 Mar 2018 10:01:43 +0100
-Subject: [PATCH 05/27] usb: add more OF/quirk properties
-
-Signed-off-by: John Crispin <john at phrozen.org>
----
- drivers/usb/host/ehci-platform.c | 5 +++++
- 1 file changed, 5 insertions(+)
-
---- a/drivers/usb/host/ehci-platform.c
-+++ b/drivers/usb/host/ehci-platform.c
-@@ -274,6 +274,11 @@ static int ehci_platform_probe(struct pl
- ehci = hcd_to_ehci(hcd);
-
- if (pdata == &ehci_platform_defaults && dev->dev.of_node) {
-+ of_property_read_u32(dev->dev.of_node, "caps-offset", &pdata->caps_offset);
-+
-+ if (of_property_read_bool(dev->dev.of_node, "has-synopsys-hc-bug"))
-+ pdata->has_synopsys_hc_bug = 1;
-+
- if (of_property_read_bool(dev->dev.of_node, "big-endian-regs"))
- ehci->big_endian_mmio = 1;
-
diff --git a/target/linux/ath79/patches-6.1/710-net-use-downstream-ag71xx.patch b/target/linux/ath79/patches-6.1/710-net-use-downstream-ag71xx.patch
deleted file mode 100644
index 54e64fb11c..0000000000
--- a/target/linux/ath79/patches-6.1/710-net-use-downstream-ag71xx.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-From: John Crispin <john at phrozen.org>
-Subject: [PATCH] ath79: add new OF only target for QCA MIPS silicon
-
-This target aims to replace ar71xx mid-term. The big part that is still
-missing is making the MMIO/AHB wifi work using OF. NAND and mikrotik
-subtargets will follow.
-
-Submitted-by: John Crispin <john at phrozen.org>
----
- drivers/net/ethernet/atheros/Kconfig | 8 +-------
- drivers/net/ethernet/atheros/Makefile | 2 +-
- 2 files changed, 2 insertions(+), 8 deletions(-)
-
---- a/drivers/net/ethernet/atheros/Kconfig
-+++ b/drivers/net/ethernet/atheros/Kconfig
-@@ -17,14 +17,7 @@ config NET_VENDOR_ATHEROS
-
- if NET_VENDOR_ATHEROS
-
--config AG71XX
-- tristate "Atheros AR7XXX/AR9XXX built-in ethernet mac support"
-- depends on ATH79
-- select PHYLINK
-- imply NET_SELFTESTS
-- help
-- If you wish to compile a kernel for AR7XXX/91XXX and enable
-- ethernet support, then you should always answer Y to this.
-+source "drivers/net/ethernet/atheros/ag71xx/Kconfig"
-
- config ATL2
- tristate "Atheros L2 Fast Ethernet support"
---- a/drivers/net/ethernet/atheros/Makefile
-+++ b/drivers/net/ethernet/atheros/Makefile
-@@ -3,7 +3,7 @@
- # Makefile for the Atheros network device drivers.
- #
-
--obj-$(CONFIG_AG71XX) += ag71xx.o
-+obj-$(CONFIG_AG71XX) += ag71xx/
- obj-$(CONFIG_ATL1) += atlx/
- obj-$(CONFIG_ATL2) += atlx/
- obj-$(CONFIG_ATL1E) += atl1e/
diff --git a/target/linux/ath79/patches-6.1/720-mdio_bitbang_ignore_ta_value.patch b/target/linux/ath79/patches-6.1/720-mdio_bitbang_ignore_ta_value.patch
deleted file mode 100644
index 5363bb37b0..0000000000
--- a/target/linux/ath79/patches-6.1/720-mdio_bitbang_ignore_ta_value.patch
+++ /dev/null
@@ -1,44 +0,0 @@
-From: Jonas Gorski <jogo at openwrt.org>
-Subject: ar71xx: add a workaround for ar8316 not always driving the TA bit to low
-
-AR8316 behind a GPIO bitbanged MDIO bus fails to drive the turnaround bit
-to low despite returning a valid value. Ignore it and just use the
-returned value anyway.
-
-SVN-Revision: 28422
----
- drivers/net/mdio/mdio-bitbang.c | 16 ++-----------------
- 1 file changed, 2 insertions(+), 14 deletions(-)
-
---- a/drivers/net/mdio/mdio-bitbang.c
-+++ b/drivers/net/mdio/mdio-bitbang.c
-@@ -152,7 +152,7 @@ static int mdiobb_cmd_addr(struct mdiobb
- int mdiobb_read(struct mii_bus *bus, int phy, int reg)
- {
- struct mdiobb_ctrl *ctrl = bus->priv;
-- int ret, i;
-+ int ret;
-
- if (reg & MII_ADDR_C45) {
- reg = mdiobb_cmd_addr(ctrl, phy, reg);
-@@ -162,19 +162,7 @@ int mdiobb_read(struct mii_bus *bus, int
-
- ctrl->ops->set_mdio_dir(ctrl, 0);
-
-- /* check the turnaround bit: the PHY should be driving it to zero, if this
-- * PHY is listed in phy_ignore_ta_mask as having broken TA, skip that
-- */
-- if (mdiobb_get_bit(ctrl) != 0 &&
-- !(bus->phy_ignore_ta_mask & (1 << phy))) {
-- /* PHY didn't drive TA low -- flush any bits it
-- * may be trying to send.
-- */
-- for (i = 0; i < 32; i++)
-- mdiobb_get_bit(ctrl);
--
-- return 0xffff;
-- }
-+ mdiobb_get_bit(ctrl);
-
- ret = mdiobb_get_num(ctrl, 16);
- mdiobb_get_bit(ctrl);
diff --git a/target/linux/ath79/patches-6.1/721-phy-mdio-bitbang-prevent-rescheduling-during-command.patch b/target/linux/ath79/patches-6.1/721-phy-mdio-bitbang-prevent-rescheduling-during-command.patch
deleted file mode 100644
index e37d9a1f63..0000000000
--- a/target/linux/ath79/patches-6.1/721-phy-mdio-bitbang-prevent-rescheduling-during-command.patch
+++ /dev/null
@@ -1,61 +0,0 @@
-From 66e584435ac0de6e0abeb6d7166fe4fe25d6bb73 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo at openwrt.org>
-Date: Tue, 16 Jun 2015 13:15:08 +0200
-Subject: [PATCH] phy/mdio-bitbang: prevent rescheduling during command
-
-It seems some phys have some maximum timings for accessing the MDIO line,
-resulting in bit errors under cpu stress. Prevent this from happening by
-disabling interrupts when sending commands.
-
-Signed-off-by: Jonas Gorski <jogo at openwrt.org>
----
- drivers/net/mdio/mdio-bitbang.c | 9 +++++++++
- 1 file changed, 9 insertions(+)
-
---- a/drivers/net/mdio/mdio-bitbang.c
-+++ b/drivers/net/mdio/mdio-bitbang.c
-@@ -14,6 +14,7 @@
- * Vitaly Bordug <vbordug at ru.mvista.com>
- */
-
-+#include <linux/irqflags.h>
- #include <linux/delay.h>
- #include <linux/mdio-bitbang.h>
- #include <linux/module.h>
-@@ -153,7 +154,9 @@ int mdiobb_read(struct mii_bus *bus, int
- {
- struct mdiobb_ctrl *ctrl = bus->priv;
- int ret;
-+ unsigned long flags;
-
-+ local_irq_save(flags);
- if (reg & MII_ADDR_C45) {
- reg = mdiobb_cmd_addr(ctrl, phy, reg);
- mdiobb_cmd(ctrl, MDIO_C45_READ, phy, reg);
-@@ -166,6 +169,7 @@ int mdiobb_read(struct mii_bus *bus, int
-
- ret = mdiobb_get_num(ctrl, 16);
- mdiobb_get_bit(ctrl);
-+ local_irq_restore(flags);
- return ret;
- }
- EXPORT_SYMBOL(mdiobb_read);
-@@ -173,7 +177,9 @@ EXPORT_SYMBOL(mdiobb_read);
- int mdiobb_write(struct mii_bus *bus, int phy, int reg, u16 val)
- {
- struct mdiobb_ctrl *ctrl = bus->priv;
-+ unsigned long flags;
-
-+ local_irq_save(flags);
- if (reg & MII_ADDR_C45) {
- reg = mdiobb_cmd_addr(ctrl, phy, reg);
- mdiobb_cmd(ctrl, MDIO_C45_WRITE, phy, reg);
-@@ -188,6 +194,8 @@ int mdiobb_write(struct mii_bus *bus, in
-
- ctrl->ops->set_mdio_dir(ctrl, 0);
- mdiobb_get_bit(ctrl);
-+ local_irq_restore(flags);
-+
- return 0;
- }
- EXPORT_SYMBOL(mdiobb_write);
diff --git a/target/linux/ath79/patches-6.1/730-ar8216-make-reg-access-atomic.patch b/target/linux/ath79/patches-6.1/730-ar8216-make-reg-access-atomic.patch
deleted file mode 100644
index 02f763534e..0000000000
--- a/target/linux/ath79/patches-6.1/730-ar8216-make-reg-access-atomic.patch
+++ /dev/null
@@ -1,59 +0,0 @@
-From b3797d1a92afe97c173b00fdb7824cedba24eef0 Mon Sep 17 00:00:00 2001
-From: Chuanhong Guo <gch981213 at gmail.com>
-Date: Sun, 20 Sep 2020 01:00:45 +0800
-Subject: [PATCH] ath79: ar8216: make switch register access atomic
-
-due to some unknown reason these register accesses sometimes fail
-on the integrated switch without this patch.
-
-THIS ONLY WORKS ON ATH79 AND MAY BREAK THE DRIVER ON OTHER PLATFORMS!
-The mdio bus on ath79 works in polling mode and doesn't rely on
-any interrupt. This patch breaks the driver on any mdio master
-with interrupts used.
-
----
---- a/drivers/net/phy/ar8216.c
-+++ b/drivers/net/phy/ar8216.c
-@@ -252,6 +252,7 @@ ar8xxx_mii_write32(struct ar8xxx_priv *p
- u32
- ar8xxx_read(struct ar8xxx_priv *priv, int reg)
- {
-+ unsigned long flags;
- struct mii_bus *bus = priv->mii_bus;
- u16 r1, r2, page;
- u32 val;
-@@ -259,11 +260,13 @@ ar8xxx_read(struct ar8xxx_priv *priv, in
- split_addr((u32) reg, &r1, &r2, &page);
-
- mutex_lock(&bus->mdio_lock);
-+ local_irq_save(flags);
-
- bus->write(bus, 0x18, 0, page);
- wait_for_page_switch();
- val = ar8xxx_mii_read32(priv, 0x10 | r2, r1);
-
-+ local_irq_restore(flags);
- mutex_unlock(&bus->mdio_lock);
-
- return val;
-@@ -272,17 +275,20 @@ ar8xxx_read(struct ar8xxx_priv *priv, in
- void
- ar8xxx_write(struct ar8xxx_priv *priv, int reg, u32 val)
- {
-+ unsigned long flags;
- struct mii_bus *bus = priv->mii_bus;
- u16 r1, r2, page;
-
- split_addr((u32) reg, &r1, &r2, &page);
-
- mutex_lock(&bus->mdio_lock);
-+ local_irq_save(flags);
-
- bus->write(bus, 0x18, 0, page);
- wait_for_page_switch();
- ar8xxx_mii_write32(priv, 0x10 | r2, r1, val);
-
-+ local_irq_restore(flags);
- mutex_unlock(&bus->mdio_lock);
- }
-
diff --git a/target/linux/ath79/patches-6.1/800-leds-add-reset-controller-based-driver.patch b/target/linux/ath79/patches-6.1/800-leds-add-reset-controller-based-driver.patch
deleted file mode 100644
index 0002b9b95b..0000000000
--- a/target/linux/ath79/patches-6.1/800-leds-add-reset-controller-based-driver.patch
+++ /dev/null
@@ -1,186 +0,0 @@
-From ecbd9c87f073f097d9fe56390353e64e963e866a Mon Sep 17 00:00:00 2001
-From: John Crispin <john at phrozen.org>
-Date: Tue, 6 Mar 2018 10:03:03 +0100
-Subject: [PATCH 03/27] leds: add reset-controller based driver
-
-Signed-off-by: John Crispin <john at phrozen.org>
----
- drivers/leds/Kconfig | 11 ++++
- drivers/leds/Makefile | 1 +
- drivers/leds/leds-reset.c | 137 ++++++++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 149 insertions(+)
- create mode 100644 drivers/leds/leds-reset.c
-
---- a/drivers/leds/Kconfig
-+++ b/drivers/leds/Kconfig
-@@ -874,6 +874,17 @@ source "drivers/leds/flash/Kconfig"
- comment "RGB LED drivers"
- source "drivers/leds/rgb/Kconfig"
-
-+config LEDS_RESET
-+ tristate "LED support for reset-controller API"
-+ depends on LEDS_CLASS
-+ depends on RESET_CONTROLLER
-+ help
-+ This option enables support for LEDs connected to pins driven by reset
-+ controllers. Yes, DNI actual built HW like that.
-+
-+ To compile this driver as a module, choose M here: the module
-+ will be called leds-reset.
-+
- comment "LED Triggers"
- source "drivers/leds/trigger/Kconfig"
-
---- /dev/null
-+++ b/drivers/leds/leds-reset.c
-@@ -0,0 +1,140 @@
-+/*
-+ * Copyright (C) 2018 John Crispin <john at phrozen.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+#include <linux/err.h>
-+#include <linux/reset.h>
-+#include <linux/kernel.h>
-+#include <linux/leds.h>
-+#include <linux/module.h>
-+#include <linux/of.h>
-+#include <linux/platform_device.h>
-+#include <linux/reset.h>
-+
-+struct reset_led_data {
-+ struct led_classdev cdev;
-+ struct reset_control *rst;
-+};
-+
-+static inline struct reset_led_data *
-+ cdev_to_reset_led_data(struct led_classdev *led_cdev)
-+{
-+ return container_of(led_cdev, struct reset_led_data, cdev);
-+}
-+
-+static void reset_led_set(struct led_classdev *led_cdev,
-+ enum led_brightness value)
-+{
-+ struct reset_led_data *led_dat = cdev_to_reset_led_data(led_cdev);
-+
-+ if (value == LED_OFF)
-+ reset_control_assert(led_dat->rst);
-+ else
-+ reset_control_deassert(led_dat->rst);
-+}
-+
-+struct reset_leds_priv {
-+ int num_leds;
-+ struct reset_led_data leds[];
-+};
-+
-+static inline int sizeof_reset_leds_priv(int num_leds)
-+{
-+ return sizeof(struct reset_leds_priv) +
-+ (sizeof(struct reset_led_data) * num_leds);
-+}
-+
-+static struct reset_leds_priv *reset_leds_create(struct platform_device *pdev)
-+{
-+ struct device *dev = &pdev->dev;
-+ struct fwnode_handle *child;
-+ struct reset_leds_priv *priv;
-+ int count, ret;
-+
-+ count = device_get_child_node_count(dev);
-+ if (!count)
-+ return ERR_PTR(-ENODEV);
-+
-+ priv = devm_kzalloc(dev, sizeof_reset_leds_priv(count), GFP_KERNEL);
-+ if (!priv)
-+ return ERR_PTR(-ENOMEM);
-+
-+ device_for_each_child_node(dev, child) {
-+ struct reset_led_data *led = &priv->leds[priv->num_leds];
-+ struct device_node *np = to_of_node(child);
-+
-+ ret = fwnode_property_read_string(child, "label", &led->cdev.name);
-+ if (!led->cdev.name) {
-+ fwnode_handle_put(child);
-+ return ERR_PTR(-EINVAL);
-+ }
-+ led->rst = __of_reset_control_get(np, NULL, 0, 0, 0, true);
-+ if (IS_ERR(led->rst))
-+ return ERR_PTR(-EINVAL);
-+
-+ fwnode_property_read_string(child, "linux,default-trigger",
-+ &led->cdev.default_trigger);
-+
-+ led->cdev.brightness_set = reset_led_set;
-+ ret = devm_led_classdev_register(&pdev->dev, &led->cdev);
-+ if (ret < 0)
-+ return ERR_PTR(ret);
-+ led->cdev.dev->of_node = np;
-+ priv->num_leds++;
-+ }
-+
-+ return priv;
-+}
-+
-+static const struct of_device_id of_reset_leds_match[] = {
-+ { .compatible = "reset-leds", },
-+ {},
-+};
-+
-+MODULE_DEVICE_TABLE(of, of_reset_leds_match);
-+
-+static int reset_led_probe(struct platform_device *pdev)
-+{
-+ struct reset_leds_priv *priv;
-+
-+ priv = reset_leds_create(pdev);
-+ if (IS_ERR(priv))
-+ return PTR_ERR(priv);
-+
-+ platform_set_drvdata(pdev, priv);
-+
-+ return 0;
-+}
-+
-+static void reset_led_shutdown(struct platform_device *pdev)
-+{
-+ struct reset_leds_priv *priv = platform_get_drvdata(pdev);
-+ int i;
-+
-+ for (i = 0; i < priv->num_leds; i++) {
-+ struct reset_led_data *led = &priv->leds[i];
-+
-+ if (!(led->cdev.flags & LED_RETAIN_AT_SHUTDOWN))
-+ reset_led_set(&led->cdev, LED_OFF);
-+ }
-+}
-+
-+static struct platform_driver reset_led_driver = {
-+ .probe = reset_led_probe,
-+ .shutdown = reset_led_shutdown,
-+ .driver = {
-+ .name = "leds-reset",
-+ .of_match_table = of_reset_leds_match,
-+ },
-+};
-+
-+module_platform_driver(reset_led_driver);
-+
-+MODULE_AUTHOR("John Crispin <john at phrozen.org>");
-+MODULE_DESCRIPTION("reset controller LED driver");
-+MODULE_LICENSE("GPL");
-+MODULE_ALIAS("platform:leds-reset");
---- a/drivers/leds/Makefile
-+++ b/drivers/leds/Makefile
-@@ -86,6 +86,7 @@ obj-$(CONFIG_LEDS_TURRIS_OMNIA) += leds
- obj-$(CONFIG_LEDS_WM831X_STATUS) += leds-wm831x-status.o
- obj-$(CONFIG_LEDS_WM8350) += leds-wm8350.o
- obj-$(CONFIG_LEDS_WRAP) += leds-wrap.o
-+obj-$(CONFIG_LEDS_RESET) += leds-reset.o
-
- # LED SPI Drivers
- obj-$(CONFIG_LEDS_CR0014114) += leds-cr0014114.o
diff --git a/target/linux/ath79/patches-6.1/810-ath79-ignore-the-abused-interrupt-map-on-pcie-node.patch b/target/linux/ath79/patches-6.1/810-ath79-ignore-the-abused-interrupt-map-on-pcie-node.patch
deleted file mode 100644
index 980c265fe6..0000000000
--- a/target/linux/ath79/patches-6.1/810-ath79-ignore-the-abused-interrupt-map-on-pcie-node.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From: Shiji Yang <yangshiji66 at outlook.com>
-Date: Wed, 31 May 2023 00:15:23 +0000
-Subject: [PATCH] ath79: ignore the abused interrupt-map on pcie node
-
-ath79 PCIe interrupt controller has stopped working correctly. This
-is because the DT exposing a non-sensical interrupt-map property,
-and their drivers relying on the kernel ignoring this property[1].
-
-This patch fix the pcie init error:
-ath9k 0000:00:00.0: of_irq_parse_pci: failed with rc=-14
-
-Notice:
-This is just a workaround, not a fix. PCIe driver and related dts
-node need to be rewritten.
-
-[1] https://lore.kernel.org/all/20211201114102.13446-1-maz@kernel.org/
-
-Signed-off-by: Shiji Yang <yangshiji66 at outlook.com>
----
- drivers/of/irq.c | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/drivers/of/irq.c
-+++ b/drivers/of/irq.c
-@@ -86,6 +86,8 @@ EXPORT_SYMBOL_GPL(of_irq_find_parent);
- * drawing board.
- */
- static const char * const of_irq_imap_abusers[] = {
-+ "qca,ar7100-pci",
-+ "qcom,ar7240-pci",
- "CBEA,platform-spider-pic",
- "sti,platform-spider-pic",
- "realtek,rtl-intc",
diff --git a/target/linux/ath79/patches-6.1/900-unaligned_access_hacks.patch b/target/linux/ath79/patches-6.1/900-unaligned_access_hacks.patch
deleted file mode 100644
index 6c97bc307c..0000000000
--- a/target/linux/ath79/patches-6.1/900-unaligned_access_hacks.patch
+++ /dev/null
@@ -1,909 +0,0 @@
-From: Felix Fietkau <nbd at openwrt.org>
-Subject: [PATCH] ar71xx: fix unaligned access in a few more places
-
-SVN-Revision: 35130
----
- arch/mips/include/asm/checksum.h | 83 +++---------------
- include/uapi/linux/ip.h | 2 +-
- include/uapi/linux/ipv6.h | 2 +-
- include/uapi/linux/tcp.h | 4 ++--
- include/uapi/linux/udp.h | 2 +-
- net/netfilter/nf_conntrack_core.c | 4 ++--
- include/uapi/linux/icmp.h | 2 +-
- include/uapi/linux/in6.h | 2 +-
- net/ipv6/tcp_ipv6.c | 9 +++--
- net/ipv6/datagram.c | 6 ++--
- net/ipv6/exthdrs.c | 2 +-
- include/linux/types.h | 5 +++
- net/ipv4/af_inet.c | 4 ++--
- net/ipv4/tcp_output.c | 69 +++++++++--------
- include/uapi/linux/igmp.h | 8 +++---
- net/core/flow_dissector.c | 2 +-
- include/uapi/linux/icmpv6.h | 2 +-
- include/net/ndisc.h | 10 ++++----
- net/sched/cls_u32.c | 6 +++---
- net/ipv6/ip6_offload.c | 2 +-
- include/net/addrconf.h | 2 +-
- include/net/inet_ecn.h | 4 ++--
- include/net/ipv6.h | 23 +++++----
- include/net/secure_seq.h | 1 +
- include/uapi/linux/in.h | 2 +-
- net/ipv6/ip6_fib.h | 2 +-
- net/netfilter/nf_conntrack_proto_tcp.c | 2 +-
- net/xfrm/xfrm_input.c | 4 ++--
- net/ipv4/tcp_input.c | 12 ++++---
- include/uapi/linux/if_pppox.h | 1 +
- net/ipv6/netfilter/nf_log_ipv6.c | 4 ++--
- include/net/neighbour.h | 6 +++--
- include/uapi/linux/netfilter_arp/arp_tables.h | 2 +-
- net/core/utils.c | 10 +++++--
- include/linux/etherdevice.h | 11 ++++---
- net/ipv4/tcp_offload.c | 6 +++---
- net/ipv6/netfilter/ip6table_mangle.c | 4 ++--
- 37 file changed, 171 insertions(+), 141 deletions(-)
-
---- a/arch/mips/include/asm/checksum.h
-+++ b/arch/mips/include/asm/checksum.h
-@@ -100,26 +100,30 @@ static inline __sum16 ip_fast_csum(const
- const unsigned int *stop = word + ihl;
- unsigned int csum;
- int carry;
-+ unsigned int w;
-
-- csum = word[0];
-- csum += word[1];
-- carry = (csum < word[1]);
-+ csum = net_hdr_word(word++);
-+
-+ w = net_hdr_word(word++);
-+ csum += w;
-+ carry = (csum < w);
- csum += carry;
-
-- csum += word[2];
-- carry = (csum < word[2]);
-+ w = net_hdr_word(word++);
-+ csum += w;
-+ carry = (csum < w);
- csum += carry;
-
-- csum += word[3];
-- carry = (csum < word[3]);
-+ w = net_hdr_word(word++);
-+ csum += w;
-+ carry = (csum < w);
- csum += carry;
-
-- word += 4;
- do {
-- csum += *word;
-- carry = (csum < *word);
-+ w = net_hdr_word(word++);
-+ csum += w;
-+ carry = (csum < w);
- csum += carry;
-- word++;
- } while (word != stop);
-
- return csum_fold(csum);
-@@ -179,74 +183,6 @@ static inline __sum16 ip_compute_csum(co
- return csum_fold(csum_partial(buff, len, 0));
- }
-
--#define _HAVE_ARCH_IPV6_CSUM
--static __inline__ __sum16 csum_ipv6_magic(const struct in6_addr *saddr,
-- const struct in6_addr *daddr,
-- __u32 len, __u8 proto,
-- __wsum sum)
--{
-- __wsum tmp;
--
-- __asm__(
-- " .set push # csum_ipv6_magic\n"
-- " .set noreorder \n"
-- " .set noat \n"
-- " addu %0, %5 # proto (long in network byte order)\n"
-- " sltu $1, %0, %5 \n"
-- " addu %0, $1 \n"
--
-- " addu %0, %6 # csum\n"
-- " sltu $1, %0, %6 \n"
-- " lw %1, 0(%2) # four words source address\n"
-- " addu %0, $1 \n"
-- " addu %0, %1 \n"
-- " sltu $1, %0, %1 \n"
--
-- " lw %1, 4(%2) \n"
-- " addu %0, $1 \n"
-- " addu %0, %1 \n"
-- " sltu $1, %0, %1 \n"
--
-- " lw %1, 8(%2) \n"
-- " addu %0, $1 \n"
-- " addu %0, %1 \n"
-- " sltu $1, %0, %1 \n"
--
-- " lw %1, 12(%2) \n"
-- " addu %0, $1 \n"
-- " addu %0, %1 \n"
-- " sltu $1, %0, %1 \n"
--
-- " lw %1, 0(%3) \n"
-- " addu %0, $1 \n"
-- " addu %0, %1 \n"
-- " sltu $1, %0, %1 \n"
--
-- " lw %1, 4(%3) \n"
-- " addu %0, $1 \n"
-- " addu %0, %1 \n"
-- " sltu $1, %0, %1 \n"
--
-- " lw %1, 8(%3) \n"
-- " addu %0, $1 \n"
-- " addu %0, %1 \n"
-- " sltu $1, %0, %1 \n"
--
-- " lw %1, 12(%3) \n"
-- " addu %0, $1 \n"
-- " addu %0, %1 \n"
-- " sltu $1, %0, %1 \n"
--
-- " addu %0, $1 # Add final carry\n"
-- " .set pop"
-- : "=&r" (sum), "=&r" (tmp)
-- : "r" (saddr), "r" (daddr),
-- "0" (htonl(len)), "r" (htonl(proto)), "r" (sum)
-- : "memory");
--
-- return csum_fold(sum);
--}
--
- #include <asm-generic/checksum.h>
- #endif /* CONFIG_GENERIC_CSUM */
-
---- a/include/uapi/linux/ip.h
-+++ b/include/uapi/linux/ip.h
-@@ -106,7 +106,7 @@ struct iphdr {
- __be32 daddr;
- );
- /*The options start here. */
--};
-+} __attribute__((packed, aligned(2)));
-
-
- struct ip_auth_hdr {
---- a/include/uapi/linux/ipv6.h
-+++ b/include/uapi/linux/ipv6.h
-@@ -135,7 +135,7 @@ struct ipv6hdr {
- struct in6_addr saddr;
- struct in6_addr daddr;
- );
--};
-+} __attribute__((packed, aligned(2)));
-
-
- /* index values for the variables in ipv6_devconf */
---- a/include/uapi/linux/tcp.h
-+++ b/include/uapi/linux/tcp.h
-@@ -55,7 +55,7 @@ struct tcphdr {
- __be16 window;
- __sum16 check;
- __be16 urg_ptr;
--};
-+} __attribute__((packed, aligned(2)));
-
- /*
- * The union cast uses a gcc extension to avoid aliasing problems
-@@ -65,7 +65,7 @@ struct tcphdr {
- union tcp_word_hdr {
- struct tcphdr hdr;
- __be32 words[5];
--};
-+} __attribute__((packed, aligned(2)));
-
- #define tcp_flag_word(tp) (((union tcp_word_hdr *)(tp))->words[3])
-
---- a/include/uapi/linux/udp.h
-+++ b/include/uapi/linux/udp.h
-@@ -25,7 +25,7 @@ struct udphdr {
- __be16 dest;
- __be16 len;
- __sum16 check;
--};
-+} __attribute__((packed, aligned(2)));
-
- /* UDP socket options */
- #define UDP_CORK 1 /* Never send partially complete segments */
---- a/net/netfilter/nf_conntrack_core.c
-+++ b/net/netfilter/nf_conntrack_core.c
-@@ -308,8 +308,8 @@ nf_ct_get_tuple(const struct sk_buff *sk
-
- switch (l3num) {
- case NFPROTO_IPV4:
-- tuple->src.u3.ip = ap[0];
-- tuple->dst.u3.ip = ap[1];
-+ tuple->src.u3.ip = net_hdr_word(ap++);
-+ tuple->dst.u3.ip = net_hdr_word(ap);
- break;
- case NFPROTO_IPV6:
- memcpy(tuple->src.u3.ip6, ap, sizeof(tuple->src.u3.ip6));
---- a/include/uapi/linux/icmp.h
-+++ b/include/uapi/linux/icmp.h
-@@ -102,7 +102,7 @@ struct icmphdr {
- } frag;
- __u8 reserved[4];
- } un;
--};
-+} __attribute__((packed, aligned(2)));
-
-
- /*
---- a/include/uapi/linux/in6.h
-+++ b/include/uapi/linux/in6.h
-@@ -43,7 +43,7 @@ struct in6_addr {
- #define s6_addr16 in6_u.u6_addr16
- #define s6_addr32 in6_u.u6_addr32
- #endif
--};
-+} __attribute__((packed, aligned(2)));
- #endif /* __UAPI_DEF_IN6_ADDR */
-
- #if __UAPI_DEF_SOCKADDR_IN6
---- a/net/ipv6/tcp_ipv6.c
-+++ b/net/ipv6/tcp_ipv6.c
-@@ -35,6 +35,7 @@
- #include <linux/ipsec.h>
- #include <linux/times.h>
- #include <linux/slab.h>
-+#include <asm/unaligned.h>
- #include <linux/uaccess.h>
- #include <linux/ipv6.h>
- #include <linux/icmpv6.h>
-@@ -901,10 +902,10 @@ static void tcp_v6_send_response(const s
- topt = (__be32 *)(t1 + 1);
-
- if (tsecr) {
-- *topt++ = htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) |
-- (TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP);
-- *topt++ = htonl(tsval);
-- *topt++ = htonl(tsecr);
-+ put_unaligned_be32((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) |
-+ (TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP, topt++);
-+ put_unaligned_be32(tsval, topt++);
-+ put_unaligned_be32(tsecr, topt++);
- }
-
- if (mrst)
---- a/include/linux/ipv6.h
-+++ b/include/linux/ipv6.h
-@@ -6,6 +6,7 @@
-
- #define ipv6_optlen(p) (((p)->hdrlen+1) << 3)
- #define ipv6_authlen(p) (((p)->hdrlen+2) << 2)
-+
- /*
- * This structure contains configuration options per IPv6 link.
- */
---- a/net/ipv6/datagram.c
-+++ b/net/ipv6/datagram.c
-@@ -497,7 +497,7 @@ int ipv6_recv_error(struct sock *sk, str
- ipv6_iface_scope_id(&sin->sin6_addr,
- IP6CB(skb)->iif);
- } else {
-- ipv6_addr_set_v4mapped(*(__be32 *)(nh + serr->addr_offset),
-+ ipv6_addr_set_v4mapped(net_hdr_word(nh + serr->addr_offset),
- &sin->sin6_addr);
- sin->sin6_scope_id = 0;
- }
-@@ -851,12 +851,12 @@ int ip6_datagram_send_ctl(struct net *ne
- }
-
- if (fl6->flowlabel&IPV6_FLOWINFO_MASK) {
-- if ((fl6->flowlabel^*(__be32 *)CMSG_DATA(cmsg))&~IPV6_FLOWINFO_MASK) {
-+ if ((fl6->flowlabel^net_hdr_word(CMSG_DATA(cmsg)))&~IPV6_FLOWINFO_MASK) {
- err = -EINVAL;
- goto exit_f;
- }
- }
-- fl6->flowlabel = IPV6_FLOWINFO_MASK & *(__be32 *)CMSG_DATA(cmsg);
-+ fl6->flowlabel = IPV6_FLOWINFO_MASK & net_hdr_word(CMSG_DATA(cmsg));
- break;
-
- case IPV6_2292HOPOPTS:
---- a/net/ipv6/exthdrs.c
-+++ b/net/ipv6/exthdrs.c
-@@ -1013,7 +1013,7 @@ static bool ipv6_hop_jumbo(struct sk_buf
- goto drop;
- }
-
-- pkt_len = ntohl(*(__be32 *)(nh + optoff + 2));
-+ pkt_len = ntohl(net_hdr_word(nh + optoff + 2));
- if (pkt_len <= IPV6_MAXPLEN) {
- icmpv6_param_prob_reason(skb, ICMPV6_HDR_FIELD, optoff + 2,
- SKB_DROP_REASON_IP_INHDR);
---- a/include/linux/types.h
-+++ b/include/linux/types.h
-@@ -232,5 +232,11 @@ typedef void (*swap_func_t)(void *a, voi
- typedef int (*cmp_r_func_t)(const void *a, const void *b, const void *priv);
- typedef int (*cmp_func_t)(const void *a, const void *b);
-
-+struct net_hdr_word {
-+ u32 words[1];
-+} __attribute__((packed, aligned(2)));
-+
-+#define net_hdr_word(_p) (((struct net_hdr_word *) (_p))->words[0])
-+
- #endif /* __ASSEMBLY__ */
- #endif /* _LINUX_TYPES_H */
---- a/net/ipv4/af_inet.c
-+++ b/net/ipv4/af_inet.c
-@@ -1515,8 +1515,8 @@ struct sk_buff *inet_gro_receive(struct
- if (unlikely(ip_fast_csum((u8 *)iph, 5)))
- goto out;
-
-- id = ntohl(*(__be32 *)&iph->id);
-- flush = (u16)((ntohl(*(__be32 *)iph) ^ skb_gro_len(skb)) | (id & ~IP_DF));
-+ id = ntohl(net_hdr_word(&iph->id));
-+ flush = (u16)((ntohl(net_hdr_word(iph)) ^ skb_gro_len(skb)) | (id & ~IP_DF));
- id >>= 16;
-
- list_for_each_entry(p, head, list) {
---- a/net/ipv4/tcp_output.c
-+++ b/net/ipv4/tcp_output.c
-@@ -612,48 +612,53 @@ static void tcp_options_write(struct tcp
- u16 options = opts->options; /* mungable copy */
-
- if (unlikely(OPTION_MD5 & options)) {
-- *ptr++ = htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) |
-- (TCPOPT_MD5SIG << 8) | TCPOLEN_MD5SIG);
-+ net_hdr_word(ptr++) =
-+ htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) |
-+ (TCPOPT_MD5SIG << 8) | TCPOLEN_MD5SIG);
- /* overload cookie hash location */
- opts->hash_location = (__u8 *)ptr;
- ptr += 4;
- }
-
- if (unlikely(opts->mss)) {
-- *ptr++ = htonl((TCPOPT_MSS << 24) |
-- (TCPOLEN_MSS << 16) |
-- opts->mss);
-+ net_hdr_word(ptr++) =
-+ htonl((TCPOPT_MSS << 24) | (TCPOLEN_MSS << 16) |
-+ opts->mss);
- }
-
- if (likely(OPTION_TS & options)) {
- if (unlikely(OPTION_SACK_ADVERTISE & options)) {
-- *ptr++ = htonl((TCPOPT_SACK_PERM << 24) |
-- (TCPOLEN_SACK_PERM << 16) |
-- (TCPOPT_TIMESTAMP << 8) |
-- TCPOLEN_TIMESTAMP);
-+ net_hdr_word(ptr++) =
-+ htonl((TCPOPT_SACK_PERM << 24) |
-+ (TCPOLEN_SACK_PERM << 16) |
-+ (TCPOPT_TIMESTAMP << 8) |
-+ TCPOLEN_TIMESTAMP);
- options &= ~OPTION_SACK_ADVERTISE;
- } else {
-- *ptr++ = htonl((TCPOPT_NOP << 24) |
-- (TCPOPT_NOP << 16) |
-- (TCPOPT_TIMESTAMP << 8) |
-- TCPOLEN_TIMESTAMP);
-+ net_hdr_word(ptr++) =
-+ htonl((TCPOPT_NOP << 24) |
-+ (TCPOPT_NOP << 16) |
-+ (TCPOPT_TIMESTAMP << 8) |
-+ TCPOLEN_TIMESTAMP);
- }
-- *ptr++ = htonl(opts->tsval);
-- *ptr++ = htonl(opts->tsecr);
-+ net_hdr_word(ptr++) = htonl(opts->tsval);
-+ net_hdr_word(ptr++) = htonl(opts->tsecr);
- }
-
- if (unlikely(OPTION_SACK_ADVERTISE & options)) {
-- *ptr++ = htonl((TCPOPT_NOP << 24) |
-- (TCPOPT_NOP << 16) |
-- (TCPOPT_SACK_PERM << 8) |
-- TCPOLEN_SACK_PERM);
-+ net_hdr_word(ptr++) =
-+ htonl((TCPOPT_NOP << 24) |
-+ (TCPOPT_NOP << 16) |
-+ (TCPOPT_SACK_PERM << 8) |
-+ TCPOLEN_SACK_PERM);
- }
-
- if (unlikely(OPTION_WSCALE & options)) {
-- *ptr++ = htonl((TCPOPT_NOP << 24) |
-- (TCPOPT_WINDOW << 16) |
-- (TCPOLEN_WINDOW << 8) |
-- opts->ws);
-+ net_hdr_word(ptr++) =
-+ htonl((TCPOPT_NOP << 24) |
-+ (TCPOPT_WINDOW << 16) |
-+ (TCPOLEN_WINDOW << 8) |
-+ opts->ws);
- }
-
- if (unlikely(opts->num_sack_blocks)) {
-@@ -661,16 +666,17 @@ static void tcp_options_write(struct tcp
- tp->duplicate_sack : tp->selective_acks;
- int this_sack;
-
-- *ptr++ = htonl((TCPOPT_NOP << 24) |
-- (TCPOPT_NOP << 16) |
-- (TCPOPT_SACK << 8) |
-- (TCPOLEN_SACK_BASE + (opts->num_sack_blocks *
-+ net_hdr_word(ptr++) =
-+ htonl((TCPOPT_NOP << 24) |
-+ (TCPOPT_NOP << 16) |
-+ (TCPOPT_SACK << 8) |
-+ (TCPOLEN_SACK_BASE + (opts->num_sack_blocks *
- TCPOLEN_SACK_PERBLOCK)));
-
- for (this_sack = 0; this_sack < opts->num_sack_blocks;
- ++this_sack) {
-- *ptr++ = htonl(sp[this_sack].start_seq);
-- *ptr++ = htonl(sp[this_sack].end_seq);
-+ net_hdr_word(ptr++) = htonl(sp[this_sack].start_seq);
-+ net_hdr_word(ptr++) = htonl(sp[this_sack].end_seq);
- }
-
- tp->rx_opt.dsack = 0;
-@@ -683,13 +689,14 @@ static void tcp_options_write(struct tcp
-
- if (foc->exp) {
- len = TCPOLEN_EXP_FASTOPEN_BASE + foc->len;
-- *ptr = htonl((TCPOPT_EXP << 24) | (len << 16) |
-+ net_hdr_word(ptr) =
-+ htonl((TCPOPT_EXP << 24) | (len << 16) |
- TCPOPT_FASTOPEN_MAGIC);
- p += TCPOLEN_EXP_FASTOPEN_BASE;
- } else {
- len = TCPOLEN_FASTOPEN_BASE + foc->len;
-- *p++ = TCPOPT_FASTOPEN;
-- *p++ = len;
-+ net_hdr_word(p++) = TCPOPT_FASTOPEN;
-+ net_hdr_word(p++) = len;
- }
-
- memcpy(p, foc->val, foc->len);
---- a/include/uapi/linux/igmp.h
-+++ b/include/uapi/linux/igmp.h
-@@ -33,7 +33,7 @@ struct igmphdr {
- __u8 code; /* For newer IGMP */
- __sum16 csum;
- __be32 group;
--};
-+} __attribute__((packed, aligned(2)));
-
- /* V3 group record types [grec_type] */
- #define IGMPV3_MODE_IS_INCLUDE 1
-@@ -49,7 +49,7 @@ struct igmpv3_grec {
- __be16 grec_nsrcs;
- __be32 grec_mca;
- __be32 grec_src[];
--};
-+} __attribute__((packed, aligned(2)));
-
- struct igmpv3_report {
- __u8 type;
-@@ -58,7 +58,7 @@ struct igmpv3_report {
- __be16 resv2;
- __be16 ngrec;
- struct igmpv3_grec grec[];
--};
-+} __attribute__((packed, aligned(2)));
-
- struct igmpv3_query {
- __u8 type;
-@@ -79,7 +79,7 @@ struct igmpv3_query {
- __u8 qqic;
- __be16 nsrcs;
- __be32 srcs[];
--};
-+} __attribute__((packed, aligned(2)));
-
- #define IGMP_HOST_MEMBERSHIP_QUERY 0x11 /* From RFC1112 */
- #define IGMP_HOST_MEMBERSHIP_REPORT 0x12 /* Ditto */
---- a/net/core/flow_dissector.c
-+++ b/net/core/flow_dissector.c
-@@ -131,7 +131,7 @@ __be32 __skb_flow_get_ports(const struct
- ports = __skb_header_pointer(skb, thoff + poff,
- sizeof(_ports), data, hlen, &_ports);
- if (ports)
-- return *ports;
-+ return (__be32)net_hdr_word(ports);
- }
-
- return 0;
---- a/include/uapi/linux/icmpv6.h
-+++ b/include/uapi/linux/icmpv6.h
-@@ -78,7 +78,7 @@ struct icmp6hdr {
- #define icmp6_addrconf_other icmp6_dataun.u_nd_ra.other
- #define icmp6_rt_lifetime icmp6_dataun.u_nd_ra.rt_lifetime
- #define icmp6_router_pref icmp6_dataun.u_nd_ra.router_pref
--};
-+} __attribute__((packed, aligned(2)));
-
-
- #define ICMPV6_ROUTER_PREF_LOW 0x3
---- a/include/net/ndisc.h
-+++ b/include/net/ndisc.h
-@@ -93,7 +93,7 @@ struct ra_msg {
- struct icmp6hdr icmph;
- __be32 reachable_time;
- __be32 retrans_timer;
--};
-+} __attribute__((packed, aligned(2)));
-
- struct rd_msg {
- struct icmp6hdr icmph;
-@@ -372,10 +372,10 @@ static inline u32 ndisc_hashfn(const voi
- {
- const u32 *p32 = pkey;
-
-- return (((p32[0] ^ hash32_ptr(dev)) * hash_rnd[0]) +
-- (p32[1] * hash_rnd[1]) +
-- (p32[2] * hash_rnd[2]) +
-- (p32[3] * hash_rnd[3]));
-+ return (((net_hdr_word(&p32[0]) ^ hash32_ptr(dev)) * hash_rnd[0]) +
-+ (net_hdr_word(&p32[1]) * hash_rnd[1]) +
-+ (net_hdr_word(&p32[2]) * hash_rnd[2]) +
-+ (net_hdr_word(&p32[3]) * hash_rnd[3]));
- }
-
- static inline struct neighbour *__ipv6_neigh_lookup_noref(struct net_device *dev, const void *pkey)
---- a/net/sched/cls_u32.c
-+++ b/net/sched/cls_u32.c
-@@ -155,7 +155,7 @@ next_knode:
- data = skb_header_pointer(skb, toff, 4, &hdata);
- if (!data)
- goto out;
-- if ((*data ^ key->val) & key->mask) {
-+ if ((net_hdr_word(data) ^ key->val) & key->mask) {
- n = rcu_dereference_bh(n->next);
- goto next_knode;
- }
-@@ -206,8 +206,8 @@ check_terminal:
- &hdata);
- if (!data)
- goto out;
-- sel = ht->divisor & u32_hash_fold(*data, &n->sel,
-- n->fshift);
-+ sel = ht->divisor & u32_hash_fold(net_hdr_word(data),
-+ &n->sel, n->fshift);
- }
- if (!(n->sel.flags & (TC_U32_VAROFFSET | TC_U32_OFFSET | TC_U32_EAT)))
- goto next_ht;
---- a/net/ipv6/ip6_offload.c
-+++ b/net/ipv6/ip6_offload.c
-@@ -290,7 +290,7 @@ INDIRECT_CALLABLE_SCOPE struct sk_buff *
- continue;
-
- iph2 = (struct ipv6hdr *)(p->data + off);
-- first_word = *(__be32 *)iph ^ *(__be32 *)iph2;
-+ first_word = net_hdr_word(iph) ^ net_hdr_word(iph2);
-
- /* All fields must match except length and Traffic Class.
- * XXX skbs on the gro_list have all been parsed and pulled
---- a/include/net/addrconf.h
-+++ b/include/net/addrconf.h
-@@ -52,7 +52,7 @@ struct prefix_info {
- __be32 reserved2;
-
- struct in6_addr prefix;
--};
-+} __attribute__((packed, aligned(2)));
-
- /* rfc4861 4.6.2: IPv6 PIO is 32 bytes in size */
- static_assert(sizeof(struct prefix_info) == 32);
---- a/include/net/inet_ecn.h
-+++ b/include/net/inet_ecn.h
-@@ -138,9 +138,9 @@ static inline int IP6_ECN_set_ce(struct
- if (INET_ECN_is_not_ect(ipv6_get_dsfield(iph)))
- return 0;
-
-- from = *(__be32 *)iph;
-+ from = net_hdr_word(iph);
- to = from | htonl(INET_ECN_CE << 20);
-- *(__be32 *)iph = to;
-+ net_hdr_word(iph) = to;
- if (skb->ip_summed == CHECKSUM_COMPLETE)
- skb->csum = csum_add(csum_sub(skb->csum, (__force __wsum)from),
- (__force __wsum)to);
---- a/include/net/ipv6.h
-+++ b/include/net/ipv6.h
-@@ -149,7 +149,7 @@ struct frag_hdr {
- __u8 reserved;
- __be16 frag_off;
- __be32 identification;
--};
-+} __attribute__((packed, aligned(2)));
-
- /*
- * Jumbo payload option, as described in RFC 2675 2.
-@@ -615,8 +615,8 @@ static inline void __ipv6_addr_set_half(
- }
- #endif
- #endif
-- addr[0] = wh;
-- addr[1] = wl;
-+ net_hdr_word(&addr[0]) = wh;
-+ net_hdr_word(&addr[1]) = wl;
- }
-
- static inline void ipv6_addr_set(struct in6_addr *addr,
-@@ -675,6 +675,8 @@ static inline bool ipv6_prefix_equal(con
- const __be32 *a1 = addr1->s6_addr32;
- const __be32 *a2 = addr2->s6_addr32;
- unsigned int pdw, pbi;
-+ /* Used for last <32-bit fraction of prefix */
-+ u32 pbia1, pbia2;
-
- /* check complete u32 in prefix */
- pdw = prefixlen >> 5;
-@@ -683,7 +685,9 @@ static inline bool ipv6_prefix_equal(con
-
- /* check incomplete u32 in prefix */
- pbi = prefixlen & 0x1f;
-- if (pbi && ((a1[pdw] ^ a2[pdw]) & htonl((0xffffffff) << (32 - pbi))))
-+ pbia1 = net_hdr_word(&a1[pdw]);
-+ pbia2 = net_hdr_word(&a2[pdw]);
-+ if (pbi && ((pbia1 ^ pbia2) & htonl((0xffffffff) << (32 - pbi))))
- return false;
-
- return true;
-@@ -805,13 +809,13 @@ static inline void ipv6_addr_set_v4mappe
- */
- static inline int __ipv6_addr_diff32(const void *token1, const void *token2, int addrlen)
- {
-- const __be32 *a1 = token1, *a2 = token2;
-+ const struct in6_addr *a1 = token1, *a2 = token2;
- int i;
-
- addrlen >>= 2;
-
- for (i = 0; i < addrlen; i++) {
-- __be32 xb = a1[i] ^ a2[i];
-+ __be32 xb = a1->s6_addr32[i] ^ a2->s6_addr32[i];
- if (xb)
- return i * 32 + 31 - __fls(ntohl(xb));
- }
-@@ -1005,17 +1009,18 @@ static inline u32 ip6_multipath_hash_fie
- static inline void ip6_flow_hdr(struct ipv6hdr *hdr, unsigned int tclass,
- __be32 flowlabel)
- {
-- *(__be32 *)hdr = htonl(0x60000000 | (tclass << 20)) | flowlabel;
-+ net_hdr_word((__be32 *)hdr) =
-+ htonl(0x60000000 | (tclass << 20)) | flowlabel;
- }
-
- static inline __be32 ip6_flowinfo(const struct ipv6hdr *hdr)
- {
-- return *(__be32 *)hdr & IPV6_FLOWINFO_MASK;
-+ return net_hdr_word((__be32 *)hdr) & IPV6_FLOWINFO_MASK;
- }
-
- static inline __be32 ip6_flowlabel(const struct ipv6hdr *hdr)
- {
-- return *(__be32 *)hdr & IPV6_FLOWLABEL_MASK;
-+ return net_hdr_word((__be32 *)hdr) & IPV6_FLOWLABEL_MASK;
- }
-
- static inline u8 ip6_tclass(__be32 flowinfo)
---- a/include/net/secure_seq.h
-+++ b/include/net/secure_seq.h
-@@ -3,6 +3,7 @@
- #define _NET_SECURE_SEQ
-
- #include <linux/types.h>
-+#include <linux/in6.h>
-
- struct net;
-
---- a/include/uapi/linux/in.h
-+++ b/include/uapi/linux/in.h
-@@ -91,7 +91,7 @@ enum {
- /* Internet address. */
- struct in_addr {
- __be32 s_addr;
--};
-+} __attribute__((packed, aligned(2)));
- #endif
-
- #define IP_TOS 1
---- a/net/ipv6/ip6_fib.c
-+++ b/net/ipv6/ip6_fib.c
-@@ -142,7 +142,7 @@ static __be32 addr_bit_set(const void *t
- * See include/asm-generic/bitops/le.h.
- */
- return (__force __be32)(1 << ((~fn_bit ^ BITOP_BE32_SWIZZLE) & 0x1f)) &
-- addr[fn_bit >> 5];
-+ net_hdr_word(&addr[fn_bit >> 5]);
- }
-
- struct fib6_info *fib6_info_alloc(gfp_t gfp_flags, bool with_fib6_nh)
---- a/net/netfilter/nf_conntrack_proto_tcp.c
-+++ b/net/netfilter/nf_conntrack_proto_tcp.c
-@@ -406,7 +406,7 @@ static void tcp_sack(const struct sk_buf
-
- /* Fast path for timestamp-only option */
- if (length == TCPOLEN_TSTAMP_ALIGNED
-- && *(__be32 *)ptr == htonl((TCPOPT_NOP << 24)
-+ && net_hdr_word(ptr) == htonl((TCPOPT_NOP << 24)
- | (TCPOPT_NOP << 16)
- | (TCPOPT_TIMESTAMP << 8)
- | TCPOLEN_TIMESTAMP))
---- a/net/xfrm/xfrm_input.c
-+++ b/net/xfrm/xfrm_input.c
-@@ -168,8 +168,8 @@ int xfrm_parse_spi(struct sk_buff *skb,
- if (!pskb_may_pull(skb, hlen))
- return -EINVAL;
-
-- *spi = *(__be32 *)(skb_transport_header(skb) + offset);
-- *seq = *(__be32 *)(skb_transport_header(skb) + offset_seq);
-+ *spi = net_hdr_word(skb_transport_header(skb) + offset);
-+ *seq = net_hdr_word(skb_transport_header(skb) + offset_seq);
- return 0;
- }
- EXPORT_SYMBOL(xfrm_parse_spi);
---- a/net/ipv4/tcp_input.c
-+++ b/net/ipv4/tcp_input.c
-@@ -4183,14 +4183,16 @@ static bool tcp_parse_aligned_timestamp(
- {
- const __be32 *ptr = (const __be32 *)(th + 1);
-
-- if (*ptr == htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16)
-- | (TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP)) {
-+ if (net_hdr_word(ptr) ==
-+ htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) |
-+ (TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP)) {
- tp->rx_opt.saw_tstamp = 1;
- ++ptr;
-- tp->rx_opt.rcv_tsval = ntohl(*ptr);
-+ tp->rx_opt.rcv_tsval = get_unaligned_be32(ptr);
- ++ptr;
-- if (*ptr)
-- tp->rx_opt.rcv_tsecr = ntohl(*ptr) - tp->tsoffset;
-+ if (net_hdr_word(ptr))
-+ tp->rx_opt.rcv_tsecr = get_unaligned_be32(ptr) -
-+ tp->tsoffset;
- else
- tp->rx_opt.rcv_tsecr = 0;
- return true;
---- a/include/uapi/linux/if_pppox.h
-+++ b/include/uapi/linux/if_pppox.h
-@@ -51,6 +51,7 @@ struct pppoe_addr {
- */
- struct pptp_addr {
- __u16 call_id;
-+ __u16 pad;
- struct in_addr sin_addr;
- };
-
---- a/include/net/neighbour.h
-+++ b/include/net/neighbour.h
-@@ -286,8 +286,10 @@ static inline bool neigh_key_eq128(const
- const u32 *n32 = (const u32 *)n->primary_key;
- const u32 *p32 = pkey;
-
-- return ((n32[0] ^ p32[0]) | (n32[1] ^ p32[1]) |
-- (n32[2] ^ p32[2]) | (n32[3] ^ p32[3])) == 0;
-+ return ((n32[0] ^ net_hdr_word(&p32[0])) |
-+ (n32[1] ^ net_hdr_word(&p32[1])) |
-+ (n32[2] ^ net_hdr_word(&p32[2])) |
-+ (n32[3] ^ net_hdr_word(&p32[3]))) == 0;
- }
-
- static inline struct neighbour *___neigh_lookup_noref(
---- a/include/uapi/linux/netfilter_arp/arp_tables.h
-+++ b/include/uapi/linux/netfilter_arp/arp_tables.h
-@@ -70,7 +70,7 @@ struct arpt_arp {
- __u8 flags;
- /* Inverse flags */
- __u16 invflags;
--};
-+} __attribute__((aligned(4)));
-
- /* Values for "flag" field in struct arpt_ip (general arp structure).
- * No flags defined yet.
---- a/net/core/utils.c
-+++ b/net/core/utils.c
-@@ -460,8 +460,14 @@ void inet_proto_csum_replace16(__sum16 *
- bool pseudohdr)
- {
- __be32 diff[] = {
-- ~from[0], ~from[1], ~from[2], ~from[3],
-- to[0], to[1], to[2], to[3],
-+ ~net_hdr_word(&from[0]),
-+ ~net_hdr_word(&from[1]),
-+ ~net_hdr_word(&from[2]),
-+ ~net_hdr_word(&from[3]),
-+ net_hdr_word(&to[0]),
-+ net_hdr_word(&to[1]),
-+ net_hdr_word(&to[2]),
-+ net_hdr_word(&to[3]),
- };
- if (skb->ip_summed != CHECKSUM_PARTIAL) {
- *sum = csum_fold(csum_partial(diff, sizeof(diff),
---- a/include/linux/etherdevice.h
-+++ b/include/linux/etherdevice.h
-@@ -555,7 +555,7 @@ static inline bool is_etherdev_addr(cons
- * @b: Pointer to Ethernet header
- *
- * Compare two Ethernet headers, returns 0 if equal.
-- * This assumes that the network header (i.e., IP header) is 4-byte
-+ * This assumes that the network header (i.e., IP header) is 2-byte
- * aligned OR the platform can handle unaligned access. This is the
- * case for all packets coming into netif_receive_skb or similar
- * entry points.
-@@ -578,11 +578,12 @@ static inline unsigned long compare_ethe
- fold |= *(unsigned long *)(a + 6) ^ *(unsigned long *)(b + 6);
- return fold;
- #else
-- u32 *a32 = (u32 *)((u8 *)a + 2);
-- u32 *b32 = (u32 *)((u8 *)b + 2);
-+ const u16 *a16 = a;
-+ const u16 *b16 = b;
-
-- return (*(u16 *)a ^ *(u16 *)b) | (a32[0] ^ b32[0]) |
-- (a32[1] ^ b32[1]) | (a32[2] ^ b32[2]);
-+ return (a16[0] ^ b16[0]) | (a16[1] ^ b16[1]) | (a16[2] ^ b16[2]) |
-+ (a16[3] ^ b16[3]) | (a16[4] ^ b16[4]) | (a16[5] ^ b16[5]) |
-+ (a16[6] ^ b16[6]);
- #endif
- }
-
---- a/net/ipv4/tcp_offload.c
-+++ b/net/ipv4/tcp_offload.c
-@@ -62,7 +62,7 @@ static struct sk_buff *__tcpv4_gso_segme
- th2 = tcp_hdr(seg->next);
- iph2 = ip_hdr(seg->next);
-
-- if (!(*(const u32 *)&th->source ^ *(const u32 *)&th2->source) &&
-+ if (!(net_hdr_word(&th->source) ^ net_hdr_word(&th2->source)) &&
- iph->daddr == iph2->daddr && iph->saddr == iph2->saddr)
- return segs;
-
-@@ -254,7 +254,7 @@ struct sk_buff *tcp_gro_lookup(struct li
- continue;
-
- th2 = tcp_hdr(p);
-- if (*(u32 *)&th->source ^ *(u32 *)&th2->source) {
-+ if (net_hdr_word(&th->source) ^ net_hdr_word(&th2->source)) {
- NAPI_GRO_CB(p)->same_flow = 0;
- continue;
- }
-@@ -320,8 +320,8 @@ struct sk_buff *tcp_gro_receive(struct l
- ~(TCP_FLAG_CWR | TCP_FLAG_FIN | TCP_FLAG_PSH));
- flush |= (__force int)(th->ack_seq ^ th2->ack_seq);
- for (i = sizeof(*th); i < thlen; i += 4)
-- flush |= *(u32 *)((u8 *)th + i) ^
-- *(u32 *)((u8 *)th2 + i);
-+ flush |= net_hdr_word((u8 *)th + i) ^
-+ net_hdr_word((u8 *)th2 + i);
-
- /* When we receive our second frame we can made a decision on if we
- * continue this flow as an atomic flow with a fixed ID or if we use
---- a/net/ipv6/netfilter/ip6table_mangle.c
-+++ b/net/ipv6/netfilter/ip6table_mangle.c
-@@ -44,7 +44,7 @@ ip6t_mangle_out(void *priv, struct sk_bu
- hop_limit = ipv6_hdr(skb)->hop_limit;
-
- /* flowlabel and prio (includes version, which shouldn't change either */
-- flowlabel = *((u_int32_t *)ipv6_hdr(skb));
-+ flowlabel = net_hdr_word(ipv6_hdr(skb));
-
- ret = ip6t_do_table(priv, skb, state);
-
-@@ -53,7 +53,7 @@ ip6t_mangle_out(void *priv, struct sk_bu
- !ipv6_addr_equal(&ipv6_hdr(skb)->daddr, &daddr) ||
- skb->mark != mark ||
- ipv6_hdr(skb)->hop_limit != hop_limit ||
-- flowlabel != *((u_int32_t *)ipv6_hdr(skb)))) {
-+ flowlabel != net_hdr_word(ipv6_hdr(skb)))) {
- err = ip6_route_me_harder(state->net, state->sk, skb);
- if (err < 0)
- ret = NF_DROP_ERR(err);
diff --git a/target/linux/ath79/patches-6.1/910-mikrotik-rb4xx.patch b/target/linux/ath79/patches-6.1/910-mikrotik-rb4xx.patch
deleted file mode 100644
index 536d7abf6b..0000000000
--- a/target/linux/ath79/patches-6.1/910-mikrotik-rb4xx.patch
+++ /dev/null
@@ -1,121 +0,0 @@
-From: Christopher Hill <ch6574 at gmail.com>
-Subject: [PATCH] ath79: add Mikrotik rb4xx series drivers
-
-This adds 3 Mikrotik rb4xx series drivers as follows:
-
-rb4xx-cpld: This is in the mfd subsystem, and is the parent CPLD device
-that interfaces between the SoC SPI bus and its two children below.
-rb4xx-gpio: This is the GPIO expander.
-rb4xx-nand: This is the NAND driver.
-
-The history of this code comes in three phases.
-
-1. The first is a May 2015 attempt to push the equivalient ar71xx rb4xx
-drivers upstream. See https://lore.kernel.org/patchwork/patch/940880/.
-
-Module-author: Gabor Juhos <juhosg at openwrt.org>
-Module-author: Imre Kaloz <kaloz at openwrt.org>
-Module-author: Bert Vermeulen <bert at biot.com>
-
-2. Next several ar71xx patches were applied bringing the code current.
-
-commit 7bbf4117c6fe4b764d9d7c62fb2bcf6dd93bff2c
-Submitted-by: Hauke Mehrtens <hauke at hauke-m.de>
-
-commit af79fdbe4af32a287798b579141204bda056b8aa
-commit 889272d92db689fd9c910243635e44c9d8323095
-commit e21cb649a235180563363b8af5ba8296b9ac0baa
-commit 7c09fa4a7492ca436f2c94bd9a465b7c5bbeed6f
-Submitted-by: Felix Fietkau <nbd at nbd.name>
-
-3. Finally a heavy refactor to split the driver into the three new
-subsystems, and updated to work with the device tree configuration, plus
-updates and review feedback incorporated
-
-Reviewed-by: Thibaut VARÈNE <hacks at slashdirt.org>
-Submitted-by: Christopher Hill <ch6574 at gmail.com>
----
- drivers/mfd/Kconfig | 8 ++++++++
- drivers/mfd/Makefile | 1 +
- drivers/gpio/Kconfig | 6 ++++++
- drivers/gpio/Makefile | 1 +
- drivers/mtd/nand/raw/Kconfig | 7 +++++++
- drivers/mtd/nand/raw/Makefile | 1 +
- 6 files changed, 24 insertions(+)
-
---- a/drivers/mfd/Kconfig
-+++ b/drivers/mfd/Kconfig
-@@ -2209,6 +2209,14 @@ config RAVE_SP_CORE
- Select this to get support for the Supervisory Processor
- device found on several devices in RAVE line of hardware.
-
-+config MFD_RB4XX_CPLD
-+ tristate "CPLD driver for Mikrotik RB4xx series boards"
-+ select MFD_CORE
-+ depends on ATH79 || COMPILE_TEST
-+ help
-+ Enables support for the CPLD chip (NAND & GPIO) on Mikrotik
-+ Routerboard RB4xx series.
-+
- config SGI_MFD_IOC3
- bool "SGI IOC3 core driver"
- depends on PCI && MIPS && 64BIT
---- a/drivers/mfd/Makefile
-+++ b/drivers/mfd/Makefile
-@@ -269,6 +269,7 @@ obj-$(CONFIG_MFD_KHADAS_MCU) += khadas-
- obj-$(CONFIG_MFD_ACER_A500_EC) += acer-ec-a500.o
- obj-$(CONFIG_MFD_QCOM_PM8008) += qcom-pm8008.o
-
-+obj-$(CONFIG_MFD_RB4XX_CPLD) += rb4xx-cpld.o
- obj-$(CONFIG_SGI_MFD_IOC3) += ioc3.o
- obj-$(CONFIG_MFD_SIMPLE_MFD_I2C) += simple-mfd-i2c.o
- obj-$(CONFIG_MFD_INTEL_M10_BMC) += intel-m10-bmc.o
---- a/drivers/gpio/Kconfig
-+++ b/drivers/gpio/Kconfig
-@@ -1594,6 +1594,12 @@ config GPIO_SODAVILLE
- help
- Say Y here to support Intel Sodaville GPIO.
-
-+config GPIO_RB4XX
-+ tristate "GPIO expander for Mikrotik RB4xx series boards"
-+ depends on MFD_RB4XX_CPLD
-+ help
-+ GPIO driver for Mikrotik Routerboard RB4xx series.
-+
- endmenu
-
- menu "SPI GPIO expanders"
---- a/drivers/gpio/Makefile
-+++ b/drivers/gpio/Makefile
-@@ -123,6 +123,7 @@ obj-$(CONFIG_GPIO_PL061) += gpio-pl061.
- obj-$(CONFIG_GPIO_PMIC_EIC_SPRD) += gpio-pmic-eic-sprd.o
- obj-$(CONFIG_GPIO_PXA) += gpio-pxa.o
- obj-$(CONFIG_GPIO_RASPBERRYPI_EXP) += gpio-raspberrypi-exp.o
-+obj-$(CONFIG_GPIO_RB4XX) += gpio-rb4xx.o
- obj-$(CONFIG_GPIO_RC5T583) += gpio-rc5t583.o
- obj-$(CONFIG_GPIO_RCAR) += gpio-rcar.o
- obj-$(CONFIG_GPIO_RDA) += gpio-rda.o
---- a/drivers/mtd/nand/raw/Kconfig
-+++ b/drivers/mtd/nand/raw/Kconfig
-@@ -565,4 +565,11 @@ config MTD_NAND_AR934X
- Enables support for NAND controller on Qualcomm Atheros SoCs.
- This controller is found on AR934x and QCA955x SoCs.
-
-+config MTD_NAND_RB4XX
-+ tristate "Support for NAND driver for Mikrotik RB4xx series boards"
-+ depends on MFD_RB4XX_CPLD
-+ help
-+ Enables support for the NAND flash chip on Mikrotik Routerboard
-+ RB4xx series.
-+
- endif # MTD_RAW_NAND
---- a/drivers/mtd/nand/raw/Makefile
-+++ b/drivers/mtd/nand/raw/Makefile
-@@ -60,6 +60,7 @@ obj-$(CONFIG_MTD_NAND_ROCKCHIP) += rock
- obj-$(CONFIG_MTD_NAND_PL35X) += pl35x-nand-controller.o
- obj-$(CONFIG_MTD_NAND_RENESAS) += renesas-nand-controller.o
- obj-$(CONFIG_MTD_NAND_AR934X) += ar934x_nand.o
-+obj-$(CONFIG_MTD_NAND_RB4XX) += nand_rb4xx.o
-
- nand-objs := nand_base.o nand_legacy.o nand_bbt.o nand_timings.o nand_ids.o
- nand-objs += nand_onfi.o
diff --git a/target/linux/ath79/patches-6.1/911-mikrotik-rb91x.patch b/target/linux/ath79/patches-6.1/911-mikrotik-rb91x.patch
deleted file mode 100644
index 677428fa65..0000000000
--- a/target/linux/ath79/patches-6.1/911-mikrotik-rb91x.patch
+++ /dev/null
@@ -1,96 +0,0 @@
-From: Denis Kalashnikov <denis281089 at gmail.com>
-Subject: [PATCH] ath79: add support for reset key on MikroTik RB912UAG-2HPnD
-
-On MikroTik RB91x board series a reset key shares SoC gpio
-line #15 with NAND ALE and NAND IO7. So we need a custom
-gpio driver to manage this non-trivial connection schema.
-Also rb91x-nand needs to have an ability to disable a polling
-of the key while it works with NAND.
-
-While we've been integrating rb91x-key into a firmware, we've
-figured out that:
-* In the gpio-latch driver we need to add a "cansleep" suffix to
-several gpiolib calls,
-* When gpio-latch and rb91x-nand fail to get a gpio and an error
-is -EPROBE_DEFER, they shouldn't report about this, since this
-actually is not an error and occurs when the gpio-latch probe
-function is called before the rb91x-key probe.
-We fix these related things here too.
-
-Submitted-by: Denis Kalashnikov <denis281089 at gmail.com>
-Reviewed-by: Sergey Ryazanov <ryazanov.s.a at gmail.com>
-Tested-by: Koen Vandeputte <koen.vandeputte at ncentric.com>
----
- drivers/gpio/Kconfig | 11 +++++++++++
- drivers/gpio/Makefile | 2 ++
- drivers/mtd/nand/raw/Kconfig | 6 ++++++
- drivers/mtd/nand/raw/Makefile | 1 +
- 7 files changed, 20 insertions(+)
-
---- a/drivers/gpio/Kconfig
-+++ b/drivers/gpio/Kconfig
-@@ -368,6 +368,12 @@ config GPIO_IXP4XX
-
- If unsure, say N.
-
-+config GPIO_LATCH_MIKROTIK
-+ tristate "MikroTik RouterBOARD GPIO latch support"
-+ depends on ATH79
-+ help
-+ GPIO driver for latch on some MikroTik RouterBOARDs.
-+
- config GPIO_LOGICVC
- tristate "Xylon LogiCVC GPIO support"
- depends on MFD_SYSCON && OF
-@@ -544,6 +550,10 @@ config GPIO_ROCKCHIP
- help
- Say yes here to support GPIO on Rockchip SoCs.
-
-+config GPIO_RB91X_KEY
-+ tristate "MikroTik RB91x board series reset key support"
-+ depends on ATH79
-+
- config GPIO_SAMA5D2_PIOBU
- tristate "SAMA5D2 PIOBU GPIO support"
- depends on MFD_SYSCON
---- a/drivers/gpio/Makefile
-+++ b/drivers/gpio/Makefile
-@@ -76,6 +76,7 @@ obj-$(CONFIG_GPIO_IT87) += gpio-it87.o
- obj-$(CONFIG_GPIO_IXP4XX) += gpio-ixp4xx.o
- obj-$(CONFIG_GPIO_JANZ_TTL) += gpio-janz-ttl.o
- obj-$(CONFIG_GPIO_KEMPLD) += gpio-kempld.o
-+obj-$(CONFIG_GPIO_LATCH_MIKROTIK) += gpio-latch-mikrotik.o
- obj-$(CONFIG_GPIO_LOGICVC) += gpio-logicvc.o
- obj-$(CONFIG_GPIO_LOONGSON1) += gpio-loongson1.o
- obj-$(CONFIG_GPIO_LOONGSON) += gpio-loongson.o
-@@ -124,6 +125,7 @@ obj-$(CONFIG_GPIO_PMIC_EIC_SPRD) += gpio
- obj-$(CONFIG_GPIO_PXA) += gpio-pxa.o
- obj-$(CONFIG_GPIO_RASPBERRYPI_EXP) += gpio-raspberrypi-exp.o
- obj-$(CONFIG_GPIO_RB4XX) += gpio-rb4xx.o
-+obj-$(CONFIG_GPIO_RB91X_KEY) += gpio-rb91x-key.o
- obj-$(CONFIG_GPIO_RC5T583) += gpio-rc5t583.o
- obj-$(CONFIG_GPIO_RCAR) += gpio-rcar.o
- obj-$(CONFIG_GPIO_RDA) += gpio-rda.o
---- a/drivers/mtd/nand/raw/Kconfig
-+++ b/drivers/mtd/nand/raw/Kconfig
-@@ -572,4 +572,10 @@ config MTD_NAND_RB4XX
- Enables support for the NAND flash chip on Mikrotik Routerboard
- RB4xx series.
-
-+config MTD_NAND_RB91X
-+ tristate "MikroTik RB91x NAND driver support"
-+ depends on ATH79 && MTD_RAW_NAND
-+ help
-+ Enables support for the NAND flash chip on MikroTik RB91x series.
-+
- endif # MTD_RAW_NAND
---- a/drivers/mtd/nand/raw/Makefile
-+++ b/drivers/mtd/nand/raw/Makefile
-@@ -61,6 +61,7 @@ obj-$(CONFIG_MTD_NAND_PL35X) += pl35x-n
- obj-$(CONFIG_MTD_NAND_RENESAS) += renesas-nand-controller.o
- obj-$(CONFIG_MTD_NAND_AR934X) += ar934x_nand.o
- obj-$(CONFIG_MTD_NAND_RB4XX) += nand_rb4xx.o
-+obj-$(CONFIG_MTD_NAND_RB91X) += rb91x_nand.o
-
- nand-objs := nand_base.o nand_legacy.o nand_bbt.o nand_timings.o nand_ids.o
- nand-objs += nand_onfi.o
More information about the lede-commits
mailing list