[openwrt/openwrt] rockchip: add support for Radxa ROCK Pi S
LEDE Commits
lede-commits at lists.infradead.org
Tue Jul 23 15:08:37 PDT 2024
hauke pushed a commit to openwrt/openwrt.git, branch main:
https://git.openwrt.org/bbcd5111cb8b24ae735085a9530afb9551f34d96
commit bbcd5111cb8b24ae735085a9530afb9551f34d96
Author: FUKAUMI Naoki <naoki at radxa.com>
AuthorDate: Mon Jul 22 08:01:56 2024 +0900
rockchip: add support for Radxa ROCK Pi S
Radxa ROCK Pi S is a small in size, full in features SBC[1] using the
Rockchip RK3308B SoC.
Hardware
--------
- Rockchip RK3308B SoC
- Quad A35 CPU
- 256/512MB DDR3 RAM
- Optional 4/8GB eMMC
- Micro SD Card slot
- Optional WiFi 4 and BT 4 (not supported yet)
- 1x 100M Ethernet with PoE support (additional PoE HAT required)
- 1x USB 2.0 Type-A port (Host)
- 1x USB 2.0 Type-C port (OTG)
- 2x 26 Pin GPIO header
[1] https://radxa.com/products/rockpi/pis
Installation
------------
Uncompress the OpenWrt sysupgrade and write it to a micro SD card or
internal eMMC using dd.
Signed-off-by: FUKAUMI Naoki <naoki at radxa.com>
Link: https://github.com/openwrt/openwrt/pull/15933
Signed-off-by: Hauke Mehrtens <hauke at hauke-m.de>
---
package/boot/rkbin/Makefile | 31 +++++
package/boot/uboot-rockchip/Makefile | 19 +++
target/linux/rockchip/image/armv8.mk | 11 ++
target/linux/rockchip/image/rock-pi-s.bootscript | 7 +
...ockchip-add-gpio-line-names-to-rk3308-roc.patch | 84 ++++++++++++
...ockchip-rk3308-rock-pi-s-gpio-line-names-.patch | 152 +++++++++++++++++++++
...ockchip-Add-sdmmc-related-properties-on-r.patch | 32 +++++
...ockchip-Add-pinctrl-for-UART0-to-rk3308-r.patch | 31 +++++
...ockchip-Add-mdio-and-ethernet-phy-nodes-t.patch | 61 +++++++++
...k-pi-s-add-led-aliases-and-stop-heartbeat.patch | 38 ++++++
10 files changed, 466 insertions(+)
diff --git a/package/boot/rkbin/Makefile b/package/boot/rkbin/Makefile
index 86d2dd0684..58098b8ea7 100644
--- a/package/boot/rkbin/Makefile
+++ b/package/boot/rkbin/Makefile
@@ -25,6 +25,19 @@ define Trusted-Firmware-A/Default
BUILD_TARGET:=rockchip
endef
+define Trusted-Firmware-A/rk3308
+ BUILD_SUBTARGET:=armv8
+ ATF:=rk33/rk3308_bl31_v2.26.elf
+ TPL:=rk33/rk3308_ddr_589MHz_uart2_m1_v2.07.bin
+endef
+
+define Trusted-Firmware-A/rk3308-rock-pi-s
+ NAME:=Radxa ROCK Pi S
+ BUILD_SUBTARGET:=armv8
+ ATF:=rk33/rk3308_bl31_v2.26.elf
+ TPL:=rk33/rk3308_ddr_589MHz_uart0_m0_v2.07.bin
+endef
+
define Trusted-Firmware-A/rk3566
BUILD_SUBTARGET:=armv8
ATF:=rk35/rk3568_bl31_v1.44.elf
@@ -45,10 +58,28 @@ define Trusted-Firmware-A/rk3568-e25
endef
TFA_TARGETS:= \
+ rk3308 \
+ rk3308-rock-pi-s \
rk3566 \
rk3568 \
rk3568-e25
+ifeq ($(BUILD_VARIANT),rk3308-rock-pi-s)
+ TPL_FILE:=rk3308_ddr_589MHz_uart0_m0_v2.07.bin
+ define Download/rk3308-tpl-rock-pi-s
+ FILE:=$(TPL_FILE)
+ URL:=https://github.com/radxa/rkbin/raw/5696fab20dcac57c1458f72dc7604ba60e553adf/bin/rk33/
+ HASH:=8a1a42df23cccb86a2dabc14a5c0e9227d64a51b9b83e9968ef5af3b30787f7d
+ endef
+
+ define Build/Prepare
+ $(eval $(call Download,rk3308-tpl-rock-pi-s))
+ $(call Build/Prepare/Default)
+
+ $(CP) $(DL_DIR)/$(TPL_FILE) $(PKG_BUILD_DIR)/bin/rk33/
+ endef
+endif
+
ifeq ($(BUILD_VARIANT),rk3568-e25)
TPL_FILE:=rk3568_ddr_1560MHz_uart2_m0_115200_v1.21.bin
define Download/rk3568-tpl-e25
diff --git a/package/boot/uboot-rockchip/Makefile b/package/boot/uboot-rockchip/Makefile
index 734f0304ee..0d31b0be6f 100644
--- a/package/boot/uboot-rockchip/Makefile
+++ b/package/boot/uboot-rockchip/Makefile
@@ -24,6 +24,24 @@ define U-Boot/Default
endef
+# RK3308 boards
+
+define U-Boot/rk3308/Default
+ BUILD_SUBTARGET:=armv8
+ DEPENDS:=+PACKAGE_u-boot-$(1):trusted-firmware-a-rk3308
+ ATF:=rk3308_bl31_v2.26.elf
+ TPL:=rk3308_ddr_589MHz_uart2_m1_v2.07.bin
+endef
+
+define U-Boot/rock-pi-s-rk3308
+ $(U-Boot/rk3308/Default)
+ DEPENDS:=+PACKAGE_u-boot-$(1):trusted-firmware-a-rk3308-rock-pi-s
+ TPL:=rk3308_ddr_589MHz_uart0_m0_v2.07.bin
+ NAME:=ROCK Pi S
+ BUILD_DEVICES:= \
+ radxa_rock-pi-s
+endef
+
# RK3328 boards
define U-Boot/rk3328/Default
@@ -186,6 +204,7 @@ UBOOT_TARGETS := \
nanopi-r4s-rk3399 \
rock-pi-4-rk3399 \
rockpro64-rk3399 \
+ rock-pi-s-rk3308 \
nanopi-r2c-rk3328 \
nanopi-r2c-plus-rk3328 \
nanopi-r2s-rk3328 \
diff --git a/target/linux/rockchip/image/armv8.mk b/target/linux/rockchip/image/armv8.mk
index 2405c07d9c..4cb9ceb40c 100644
--- a/target/linux/rockchip/image/armv8.mk
+++ b/target/linux/rockchip/image/armv8.mk
@@ -131,6 +131,17 @@ define Device/radxa_rock-pi-e
endef
TARGET_DEVICES += radxa_rock-pi-e
+define Device/radxa_rock-pi-s
+ DEVICE_VENDOR := Radxa
+ DEVICE_MODEL := ROCK Pi S
+ SOC := rk3308
+ DEVICE_DTS := rockchip/rk3308-rock-pi-s
+ BOOT_SCRIPT := rock-pi-s
+ UBOOT_DEVICE_NAME := rock-pi-s-rk3308
+ DEVICE_PACKAGES := kmod-usb-net-cdc-ncm kmod-usb-net-rndis
+endef
+TARGET_DEVICES += radxa_rock-pi-s
+
define Device/sinovoip_bpi-r2-pro
DEVICE_VENDOR := Sinovoip
DEVICE_MODEL := Bananapi-R2 Pro
diff --git a/target/linux/rockchip/image/rock-pi-s.bootscript b/target/linux/rockchip/image/rock-pi-s.bootscript
new file mode 100644
index 0000000000..c968e53d81
--- /dev/null
+++ b/target/linux/rockchip/image/rock-pi-s.bootscript
@@ -0,0 +1,7 @@
+part uuid ${devtype} ${devnum}:2 uuid
+
+setenv bootargs "console=ttyS0,1500000 earlycon=uart8250,mmio32,0xff0a0000 root=PARTUUID=${uuid} rw rootwait";
+
+load ${devtype} ${devnum}:1 ${kernel_addr_r} kernel.img
+
+bootm ${kernel_addr_r}
diff --git a/target/linux/rockchip/patches-6.6/040-v6.8-arm64-dts-rockchip-add-gpio-line-names-to-rk3308-roc.patch b/target/linux/rockchip/patches-6.6/040-v6.8-arm64-dts-rockchip-add-gpio-line-names-to-rk3308-roc.patch
new file mode 100644
index 0000000000..28e3b276ba
--- /dev/null
+++ b/target/linux/rockchip/patches-6.6/040-v6.8-arm64-dts-rockchip-add-gpio-line-names-to-rk3308-roc.patch
@@ -0,0 +1,84 @@
+From c45de75d7a9ab44a15dedc7a121d6371d6891301 Mon Sep 17 00:00:00 2001
+From: Trevor Woerner <twoerner at gmail.com>
+Date: Mon, 20 Nov 2023 11:22:32 -0500
+Subject: [PATCH] arm64: dts: rockchip: add gpio-line-names to rk3308-rock-pi-s
+
+Add names to the pins of the general-purpose expansion header as given in the
+Radxa GPIO page[1] following the conventions in the kernel documentation[2] to
+make it easier for users to correlate the pins with functions when using
+utilities such as gpioinfo.
+
+[1] https://wiki.radxa.com/RockpiS/hardware/gpio
+[2] Documentation/devicetree/bindings/gpio/gpio.txt
+
+Signed-off-by: Trevor Woerner <twoerner at gmail.com>
+Link: https://lore.kernel.org/r/20231120162232.27653-1-twoerner@gmail.com
+Signed-off-by: Heiko Stuebner <heiko at sntech.de>
+---
+ .../boot/dts/rockchip/rk3308-rock-pi-s.dts | 58 +++++++++++++++++++
+ 1 file changed, 58 insertions(+)
+
+--- a/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts
+@@ -258,3 +258,61 @@
+ &wdt {
+ status = "okay";
+ };
++
++&gpio0 {
++ gpio-line-names =
++ /* GPIO0_A0 - A7 */
++ "", "", "", "", "", "", "", "",
++ /* GPIO0_B0 - B7 */
++ "", "", "", "header1-pin3 [GPIO0_B3]", "header1-pin5 [GPIO0_B4]",
++ "", "", "header1-pin11 [GPIO0_B7]",
++ /* GPIO0_C0 - C7 */
++ "header1-pin13 [GPIO0_C0]", "header1-pin15 [GPIO0_C1]", "", "", "",
++ "", "", "",
++ /* GPIO0_D0 - D8 */
++ "", "", "", "", "", "", "", "";
++};
++
++&gpio1 {
++ gpio-line-names =
++ /* GPIO1_A0 - A7 */
++ "", "", "", "", "", "", "", "",
++ /* GPIO1_B0 - B7 */
++ "", "", "", "", "", "", "", "",
++ /* GPIO1_C0 - C7 */
++ "", "", "", "", "", "", "header1-pin21 [GPIO1_C6]",
++ "header1-pin19 [GPIO1_C7]",
++ /* GPIO1_D0 - D8 */
++ "header1-pin23 [GPIO1_D0]", "header1-pin24 [GPIO1_D1]", "", "", "",
++ "", "", "";
++};
++
++&gpio2 {
++ gpio-line-names =
++ /* GPIO2_A0 - A7 */
++ "header1-pin10 [GPIO2_A0]", "header1-pin8 [GPIO2_A1]", "", "",
++ "header1-pin7 [GPIO2_A4]", "header1-pin12 [GPIO2_A5]",
++ "header2-pin46 [GPIO2_A6]", "header1-pin22 [GPIO1_A7]",
++ /* GPIO2_B0 - B7 */
++ "header2-pin45 [GPIO2_B0]", "header1-pin18 [GPIO2_B1]",
++ "header1-pin16 [GPIO2_B2]", "header2-pin44 [GPIO2_B3]",
++ "header2-pin43 [GPIO2_B4]", "header2-pin28 [GPIO2_B5]",
++ "header2-pin30 [GPIO2_B6]", "header2-pin32 [GPIO2_B7]",
++ /* GPIO2_C0 - C7 */
++ "header2-pin34 [GPIO2_C0]", "", "", "", "", "", "", "",
++ /* GPIO2_D0 - D8 */
++ "", "", "", "", "", "", "", "";
++};
++
++&gpio3 {
++ gpio-line-names =
++ /* GPIO3_A0 - A7 */
++ "", "", "", "", "", "", "", "",
++ /* GPIO3_B0 - B7 */
++ "", "", "header2-pin42 [GPIO3_B2]", "header2-pin41 [GPIO3_B3]",
++ "header2-pin40 [GPIO3_B4]", "header2-pin39 [GPIO3_B5]", "", "",
++ /* GPIO3_C0 - C7 */
++ "", "", "", "", "", "", "", "",
++ /* GPIO3_D0 - D8 */
++ "", "", "", "", "", "", "", "";
++};
diff --git a/target/linux/rockchip/patches-6.6/041-v6.8-arm64-dts-rockchip-rk3308-rock-pi-s-gpio-line-names-.patch b/target/linux/rockchip/patches-6.6/041-v6.8-arm64-dts-rockchip-rk3308-rock-pi-s-gpio-line-names-.patch
new file mode 100644
index 0000000000..3d006c00fe
--- /dev/null
+++ b/target/linux/rockchip/patches-6.6/041-v6.8-arm64-dts-rockchip-rk3308-rock-pi-s-gpio-line-names-.patch
@@ -0,0 +1,152 @@
+From 085021cc825ed90a6ddc4406f608fb8a85745f81 Mon Sep 17 00:00:00 2001
+From: Trevor Woerner <twoerner at gmail.com>
+Date: Tue, 19 Dec 2023 12:38:13 -0500
+Subject: [PATCH] arm64: dts: rockchip: rk3308-rock-pi-s gpio-line-names
+ cleanup
+
+Perform the following cleanups on a previous patch:
+- indent lines after "gpio-line-names"
+- fix D0-D8 -> D0-D7
+- sort phandle references
+
+Fixes: c45de75d7a9a ("arm64: dts: rockchip: add gpio-line-names to rk3308-rock-pi-s")
+Signed-off-by: Trevor Woerner <twoerner at gmail.com>
+Link: https://lore.kernel.org/r/20231219173814.1569-1-twoerner@gmail.com
+Signed-off-by: Heiko Stuebner <heiko at sntech.de>
+---
+ .../boot/dts/rockchip/rk3308-rock-pi-s.dts | 120 +++++++++---------
+ 1 file changed, 62 insertions(+), 58 deletions(-)
+
+--- a/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts
+@@ -151,6 +151,68 @@
+ status = "okay";
+ };
+
++&gpio0 {
++ gpio-line-names =
++ /* GPIO0_A0 - A7 */
++ "", "", "", "", "", "", "", "",
++ /* GPIO0_B0 - B7 */
++ "", "", "", "header1-pin3 [GPIO0_B3]",
++ "header1-pin5 [GPIO0_B4]", "", "",
++ "header1-pin11 [GPIO0_B7]",
++ /* GPIO0_C0 - C7 */
++ "header1-pin13 [GPIO0_C0]",
++ "header1-pin15 [GPIO0_C1]", "", "", "",
++ "", "", "",
++ /* GPIO0_D0 - D7 */
++ "", "", "", "", "", "", "", "";
++};
++
++&gpio1 {
++ gpio-line-names =
++ /* GPIO1_A0 - A7 */
++ "", "", "", "", "", "", "", "",
++ /* GPIO1_B0 - B7 */
++ "", "", "", "", "", "", "", "",
++ /* GPIO1_C0 - C7 */
++ "", "", "", "", "", "", "header1-pin21 [GPIO1_C6]",
++ "header1-pin19 [GPIO1_C7]",
++ /* GPIO1_D0 - D7 */
++ "header1-pin23 [GPIO1_D0]", "header1-pin24 [GPIO1_D1]",
++ "", "", "", "", "", "";
++};
++
++&gpio2 {
++ gpio-line-names =
++ /* GPIO2_A0 - A7 */
++ "header1-pin10 [GPIO2_A0]", "header1-pin8 [GPIO2_A1]",
++ "", "",
++ "header1-pin7 [GPIO2_A4]", "header1-pin12 [GPIO2_A5]",
++ "header2-pin46 [GPIO2_A6]", "header1-pin22 [GPIO1_A7]",
++ /* GPIO2_B0 - B7 */
++ "header2-pin45 [GPIO2_B0]", "header1-pin18 [GPIO2_B1]",
++ "header1-pin16 [GPIO2_B2]", "header2-pin44 [GPIO2_B3]",
++ "header2-pin43 [GPIO2_B4]", "header2-pin28 [GPIO2_B5]",
++ "header2-pin30 [GPIO2_B6]", "header2-pin32 [GPIO2_B7]",
++ /* GPIO2_C0 - C7 */
++ "header2-pin34 [GPIO2_C0]", "", "", "", "", "", "", "",
++ /* GPIO2_D0 - D7 */
++ "", "", "", "", "", "", "", "";
++};
++
++&gpio3 {
++ gpio-line-names =
++ /* GPIO3_A0 - A7 */
++ "", "", "", "", "", "", "", "",
++ /* GPIO3_B0 - B7 */
++ "", "", "header2-pin42 [GPIO3_B2]",
++ "header2-pin41 [GPIO3_B3]", "header2-pin40 [GPIO3_B4]",
++ "header2-pin39 [GPIO3_B5]", "", "",
++ /* GPIO3_C0 - C7 */
++ "", "", "", "", "", "", "", "",
++ /* GPIO3_D0 - D7 */
++ "", "", "", "", "", "", "", "";
++};
++
+ &i2c1 {
+ status = "okay";
+ };
+@@ -258,61 +320,3 @@
+ &wdt {
+ status = "okay";
+ };
+-
+-&gpio0 {
+- gpio-line-names =
+- /* GPIO0_A0 - A7 */
+- "", "", "", "", "", "", "", "",
+- /* GPIO0_B0 - B7 */
+- "", "", "", "header1-pin3 [GPIO0_B3]", "header1-pin5 [GPIO0_B4]",
+- "", "", "header1-pin11 [GPIO0_B7]",
+- /* GPIO0_C0 - C7 */
+- "header1-pin13 [GPIO0_C0]", "header1-pin15 [GPIO0_C1]", "", "", "",
+- "", "", "",
+- /* GPIO0_D0 - D8 */
+- "", "", "", "", "", "", "", "";
+-};
+-
+-&gpio1 {
+- gpio-line-names =
+- /* GPIO1_A0 - A7 */
+- "", "", "", "", "", "", "", "",
+- /* GPIO1_B0 - B7 */
+- "", "", "", "", "", "", "", "",
+- /* GPIO1_C0 - C7 */
+- "", "", "", "", "", "", "header1-pin21 [GPIO1_C6]",
+- "header1-pin19 [GPIO1_C7]",
+- /* GPIO1_D0 - D8 */
+- "header1-pin23 [GPIO1_D0]", "header1-pin24 [GPIO1_D1]", "", "", "",
+- "", "", "";
+-};
+-
+-&gpio2 {
+- gpio-line-names =
+- /* GPIO2_A0 - A7 */
+- "header1-pin10 [GPIO2_A0]", "header1-pin8 [GPIO2_A1]", "", "",
+- "header1-pin7 [GPIO2_A4]", "header1-pin12 [GPIO2_A5]",
+- "header2-pin46 [GPIO2_A6]", "header1-pin22 [GPIO1_A7]",
+- /* GPIO2_B0 - B7 */
+- "header2-pin45 [GPIO2_B0]", "header1-pin18 [GPIO2_B1]",
+- "header1-pin16 [GPIO2_B2]", "header2-pin44 [GPIO2_B3]",
+- "header2-pin43 [GPIO2_B4]", "header2-pin28 [GPIO2_B5]",
+- "header2-pin30 [GPIO2_B6]", "header2-pin32 [GPIO2_B7]",
+- /* GPIO2_C0 - C7 */
+- "header2-pin34 [GPIO2_C0]", "", "", "", "", "", "", "",
+- /* GPIO2_D0 - D8 */
+- "", "", "", "", "", "", "", "";
+-};
+-
+-&gpio3 {
+- gpio-line-names =
+- /* GPIO3_A0 - A7 */
+- "", "", "", "", "", "", "", "",
+- /* GPIO3_B0 - B7 */
+- "", "", "header2-pin42 [GPIO3_B2]", "header2-pin41 [GPIO3_B3]",
+- "header2-pin40 [GPIO3_B4]", "header2-pin39 [GPIO3_B5]", "", "",
+- /* GPIO3_C0 - C7 */
+- "", "", "", "", "", "", "", "",
+- /* GPIO3_D0 - D8 */
+- "", "", "", "", "", "", "", "";
+-};
diff --git a/target/linux/rockchip/patches-6.6/044-v6.11-arm64-dts-rockchip-Add-sdmmc-related-properties-on-r.patch b/target/linux/rockchip/patches-6.6/044-v6.11-arm64-dts-rockchip-Add-sdmmc-related-properties-on-r.patch
new file mode 100644
index 0000000000..d9e69def19
--- /dev/null
+++ b/target/linux/rockchip/patches-6.6/044-v6.11-arm64-dts-rockchip-Add-sdmmc-related-properties-on-r.patch
@@ -0,0 +1,32 @@
+From fc0daeccc384233eadfa9d5ddbd00159653c6bdc Mon Sep 17 00:00:00 2001
+From: Jonas Karlman <jonas at kwiboo.se>
+Date: Tue, 21 May 2024 21:10:07 +0000
+Subject: [PATCH] arm64: dts: rockchip: Add sdmmc related properties on
+ rk3308-rock-pi-s
+
+Add cap-mmc-highspeed to allow use of high speed MMC mode using an eMMC
+to uSD board. Use disable-wp to signal that no physical write-protect
+line is present. Also add vcc_io used for card and IO line power as
+vmmc-supply.
+
+Fixes: 2e04c25b1320 ("arm64: dts: rockchip: add ROCK Pi S DTS support")
+Signed-off-by: Jonas Karlman <jonas at kwiboo.se>
+Link: https://lore.kernel.org/r/20240521211029.1236094-5-jonas@kwiboo.se
+Signed-off-by: Heiko Stuebner <heiko at sntech.de>
+---
+ arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts | 3 +++
+ 1 file changed, 3 insertions(+)
+
+--- a/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts
+@@ -272,7 +272,10 @@
+ };
+
+ &sdmmc {
++ cap-mmc-highspeed;
+ cap-sd-highspeed;
++ disable-wp;
++ vmmc-supply = <&vcc_io>;
+ status = "okay";
+ };
+
diff --git a/target/linux/rockchip/patches-6.6/045-v6.11-arm64-dts-rockchip-Add-pinctrl-for-UART0-to-rk3308-r.patch b/target/linux/rockchip/patches-6.6/045-v6.11-arm64-dts-rockchip-Add-pinctrl-for-UART0-to-rk3308-r.patch
new file mode 100644
index 0000000000..a1ada4de25
--- /dev/null
+++ b/target/linux/rockchip/patches-6.6/045-v6.11-arm64-dts-rockchip-Add-pinctrl-for-UART0-to-rk3308-r.patch
@@ -0,0 +1,31 @@
+From 7affb86ef62581e3475ce3e0a7640da1f2ee29f8 Mon Sep 17 00:00:00 2001
+From: Jonas Karlman <jonas at kwiboo.se>
+Date: Tue, 21 May 2024 21:10:08 +0000
+Subject: [PATCH] arm64: dts: rockchip: Add pinctrl for UART0 to
+ rk3308-rock-pi-s
+
+UAR0 CTS/RTS is not wired to any pin and is not used for the default
+serial console use of UART0 on ROCK Pi S.
+
+Override the SoC defined pinctrl props to limit configuration of the
+two xfer pins wired to one of the GPIO pin headers.
+
+Fixes: 2e04c25b1320 ("arm64: dts: rockchip: add ROCK Pi S DTS support")
+Signed-off-by: Jonas Karlman <jonas at kwiboo.se>
+Link: https://lore.kernel.org/r/20240521211029.1236094-6-jonas@kwiboo.se
+Signed-off-by: Heiko Stuebner <heiko at sntech.de>
+---
+ arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts | 2 ++
+ 1 file changed, 2 insertions(+)
+
+--- a/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts
+@@ -294,6 +294,8 @@
+ };
+
+ &uart0 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&uart0_xfer>;
+ status = "okay";
+ };
+
diff --git a/target/linux/rockchip/patches-6.6/046-v6.11-arm64-dts-rockchip-Add-mdio-and-ethernet-phy-nodes-t.patch b/target/linux/rockchip/patches-6.6/046-v6.11-arm64-dts-rockchip-Add-mdio-and-ethernet-phy-nodes-t.patch
new file mode 100644
index 0000000000..2120974ec9
--- /dev/null
+++ b/target/linux/rockchip/patches-6.6/046-v6.11-arm64-dts-rockchip-Add-mdio-and-ethernet-phy-nodes-t.patch
@@ -0,0 +1,61 @@
+From 4b64ed510ed946a4e4ca6d51d6512bf5361f6a04 Mon Sep 17 00:00:00 2001
+From: Jonas Karlman <jonas at kwiboo.se>
+Date: Tue, 21 May 2024 21:10:10 +0000
+Subject: [PATCH] arm64: dts: rockchip: Add mdio and ethernet-phy nodes to
+ rk3308-rock-pi-s
+
+Be explicit about the Ethernet port and define mdio and ethernet-phy
+nodes in the device tree for ROCK Pi S.
+
+Fixes: bc3753aed81f ("arm64: dts: rockchip: rock-pi-s add more peripherals")
+Signed-off-by: Jonas Karlman <jonas at kwiboo.se>
+Link: https://lore.kernel.org/r/20240521211029.1236094-8-jonas@kwiboo.se
+Signed-off-by: Heiko Stuebner <heiko at sntech.de>
+---
+ .../boot/dts/rockchip/rk3308-rock-pi-s.dts | 26 ++++++++++++++++---
+ 1 file changed, 23 insertions(+), 3 deletions(-)
+
+--- a/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts
+@@ -144,11 +144,25 @@
+
+ &gmac {
+ clock_in_out = "output";
++ phy-handle = <&rtl8201f>;
+ phy-supply = <&vcc_io>;
+- snps,reset-gpio = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
+- snps,reset-active-low;
+- snps,reset-delays-us = <0 50000 50000>;
+ status = "okay";
++
++ mdio {
++ compatible = "snps,dwmac-mdio";
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ rtl8201f: ethernet-phy at 1 {
++ compatible = "ethernet-phy-ieee802.3-c22";
++ reg = <1>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&mac_rst>;
++ reset-assert-us = <20000>;
++ reset-deassert-us = <50000>;
++ reset-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
++ };
++ };
+ };
+
+ &gpio0 {
+@@ -221,6 +235,12 @@
+ pinctrl-names = "default";
+ pinctrl-0 = <&rtc_32k>;
+
++ gmac {
++ mac_rst: mac-rst {
++ rockchip,pins = <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++ };
++
+ leds {
+ green_led: green-led {
+ rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
diff --git a/target/linux/rockchip/patches-6.6/113-rock-pi-s-add-led-aliases-and-stop-heartbeat.patch b/target/linux/rockchip/patches-6.6/113-rock-pi-s-add-led-aliases-and-stop-heartbeat.patch
new file mode 100644
index 0000000000..9564c900a2
--- /dev/null
+++ b/target/linux/rockchip/patches-6.6/113-rock-pi-s-add-led-aliases-and-stop-heartbeat.patch
@@ -0,0 +1,38 @@
+--- a/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts
+@@ -17,6 +17,10 @@
+ ethernet0 = &gmac;
+ mmc0 = &emmc;
+ mmc1 = &sdmmc;
++ led-boot = &blue_led;
++ led-failsafe = &blue_led;
++ led-running = &blue_led;
++ led-upgrade = &blue_led;
+ };
+
+ chosen {
+@@ -28,22 +32,19 @@
+ pinctrl-names = "default";
+ pinctrl-0 = <&green_led>, <&heartbeat_led>;
+
+- green-led {
++ led-0 {
+ color = <LED_COLOR_ID_GREEN>;
+ default-state = "on";
+ function = LED_FUNCTION_POWER;
+ gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
+- label = "rockpis:green:power";
+ linux,default-trigger = "default-on";
+ };
+
+- blue-led {
++ blue_led: led-1 {
+ color = <LED_COLOR_ID_BLUE>;
+ default-state = "on";
+ function = LED_FUNCTION_HEARTBEAT;
+ gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
+- label = "rockpis:blue:user";
+- linux,default-trigger = "heartbeat";
+ };
+ };
+
More information about the lede-commits
mailing list