[openwrt/openwrt] mediatek: add ABT ASR3000 support
LEDE Commits
lede-commits at lists.infradead.org
Sun Jul 21 07:14:51 PDT 2024
hauke pushed a commit to openwrt/openwrt.git, branch main:
https://git.openwrt.org/f2f428c6991ba4be7180208c99693d8bb37e082b
commit f2f428c6991ba4be7180208c99693d8bb37e082b
Author: Tianling Shen <cnsztl at immortalwrt.org>
AuthorDate: Sat Jul 6 15:30:31 2024 +0800
mediatek: add ABT ASR3000 support
Hardware specification:
SoC: MediaTek MT7981B 2x A53
Flash: 128 MB SPI-NAND
RAM: 256MB
Ethernet: 4x 10/100/1000 Mbps
Switch: MediaTek MT7531AE
WiFi: MediaTek MT7976C
Button: Reset, Mesh
Power: DC 12V 1A
Gain telnet access:
1. Login into web interface, and download the configuration.
2. Decode and uncompress the configuration:
* Enter fakeroot if you are not login as root.
base64 -d e-xxxxxxxxxxxx-cfg.tar.gz | tar -zx
3. Edit 'etc/passwd', remove root password: 'root::1:0:99999:7:::'.
4. Edit 'etc/rc.local', insert telnetd command before 'exit 0':
( sleep 3s; /usr/sbin/telnetd; ) &
5. Repack the configuration:
tar -zc etc/ | base64 > e-xxxxxxxxxxxx-cfg.tar.gz
6. Upload new configuration via web interface, now you can connect to
ASR3000 via telnet.
Flash instructions:
1. Connect to ASR3000, backup everything, especially 'Factory' part.
2. Write new BL2:
mtd write openwrt-mediatek-filogic-abt_asr3000-preloader.bin BL2
3. Write new FIP:
mtd write openwrt-mediatek-filogic-abt_asr3000-bl31-uboot.fip FIP
4. Set static IP on your PC:
IP 192.168.1.254/24, GW 192.168.1.1
5. Serve OpenWrt initramfs image using TFTP server.
6. Cut off the power and re-engage, wait for TFTP recovery to complete.
7. After OpenWrt has booted, perform sysupgrade.
Signed-off-by: Tianling Shen <cnsztl at immortalwrt.org>
Link: https://github.com/openwrt/openwrt/pull/15887
Signed-off-by: Hauke Mehrtens <hauke at hauke-m.de>
---
package/boot/uboot-envtools/files/mediatek_filogic | 29 +-
package/boot/uboot-mediatek/Makefile | 13 +
.../patches/444-add-abt_asr3000.patch | 347 +++++++++++++++++++++
target/linux/mediatek/dts/mt7981b-abt-asr3000.dts | 275 ++++++++++++++++
.../filogic/base-files/etc/board.d/01_leds | 5 +
.../filogic/base-files/etc/board.d/02_network | 13 +-
.../etc/hotplug.d/ieee80211/11_fix_wifi_mac | 7 +
.../filogic/base-files/lib/upgrade/platform.sh | 31 +-
target/linux/mediatek/image/filogic.mk | 24 ++
9 files changed, 709 insertions(+), 35 deletions(-)
diff --git a/package/boot/uboot-envtools/files/mediatek_filogic b/package/boot/uboot-envtools/files/mediatek_filogic
index 67d37931c2..c6d914eb70 100644
--- a/package/boot/uboot-envtools/files/mediatek_filogic
+++ b/package/boot/uboot-envtools/files/mediatek_filogic
@@ -33,6 +33,21 @@ ubootenv_add_ubi_default() {
}
case "$board" in
+abt,asr3000|\
+h3c,magic-nx30-pro|\
+jcg,q30-pro|\
+netcore,n60|\
+nokia,ea0326gmp|\
+qihoo,360t7|\
+tplink,tl-xdr4288|\
+tplink,tl-xdr6086|\
+tplink,tl-xdr6088|\
+xiaomi,mi-router-ax3000t-ubootmod|\
+xiaomi,mi-router-wr30u-ubootmod|\
+xiaomi,redmi-router-ax6000-ubootmod|\
+zyxel,ex5601-t0-ubootmod)
+ ubootenv_add_ubi_default
+ ;;
asus,rt-ax59u)
ubootenv_add_uci_config "/dev/mtd0" "0x100000" "0x20000" "0x20000"
;;
@@ -70,20 +85,6 @@ zbtlink,zbt-z8103ax)
dlink,aquila-pro-ai-m30-a1)
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x40000" "0x40000"
;;
-h3c,magic-nx30-pro|\
-jcg,q30-pro|\
-netcore,n60|\
-nokia,ea0326gmp|\
-qihoo,360t7|\
-tplink,tl-xdr4288|\
-tplink,tl-xdr6086|\
-tplink,tl-xdr6088|\
-xiaomi,mi-router-ax3000t-ubootmod|\
-xiaomi,mi-router-wr30u-ubootmod|\
-xiaomi,redmi-router-ax6000-ubootmod|\
-zyxel,ex5601-t0-ubootmod)
- ubootenv_add_ubi_default
- ;;
glinet,gl-mt2500|\
glinet,gl-mt6000)
local envdev=$(find_mmc_part "u-boot-env")
diff --git a/package/boot/uboot-mediatek/Makefile b/package/boot/uboot-mediatek/Makefile
index 71b72ba018..d3363ea713 100644
--- a/package/boot/uboot-mediatek/Makefile
+++ b/package/boot/uboot-mediatek/Makefile
@@ -219,6 +219,18 @@ define U-Boot/mt7629_rfb
UBOOT_CONFIG:=mt7629_rfb
endef
+define U-Boot/mt7981_abt_asr3000
+ NAME:=ABT ASR3000
+ BUILD_SUBTARGET:=filogic
+ BUILD_DEVICES:=abt_asr3000
+ UBOOT_CONFIG:=mt7981_abt_asr3000
+ UBOOT_IMAGE:=u-boot.fip
+ BL2_BOOTDEV:=spim-nand
+ BL2_SOC:=mt7981
+ BL2_DDRTYPE:=ddr3
+ DEPENDS:=+trusted-firmware-a-mt7981-spim-nand-ddr3
+endef
+
define U-Boot/mt7981_cmcc_rax3000m-emmc
NAME:=CMCC RAX3000M
BUILD_SUBTARGET:=filogic
@@ -734,6 +746,7 @@ UBOOT_TARGETS := \
mt7628_rfb \
mt7628_ravpower_rp-wd009 \
mt7629_rfb \
+ mt7981_abt_asr3000 \
mt7981_cmcc_rax3000m-emmc \
mt7981_cmcc_rax3000m-nand \
mt7981_h3c_magic-nx30-pro \
diff --git a/package/boot/uboot-mediatek/patches/444-add-abt_asr3000.patch b/package/boot/uboot-mediatek/patches/444-add-abt_asr3000.patch
new file mode 100644
index 0000000000..162e502f1a
--- /dev/null
+++ b/package/boot/uboot-mediatek/patches/444-add-abt_asr3000.patch
@@ -0,0 +1,347 @@
+--- /dev/null
++++ b/configs/mt7981_abt_asr3000_defconfig
+@@ -0,0 +1,107 @@
++CONFIG_ARM=y
++CONFIG_SYS_HAS_NONCACHED_MEMORY=y
++CONFIG_POSITION_INDEPENDENT=y
++CONFIG_ARCH_MEDIATEK=y
++CONFIG_TEXT_BASE=0x41e00000
++CONFIG_SYS_MALLOC_F_LEN=0x4000
++CONFIG_NR_DRAM_BANKS=1
++CONFIG_DEFAULT_DEVICE_TREE="mt7981-abt-asr3000"
++CONFIG_OF_LIBFDT_OVERLAY=y
++CONFIG_TARGET_MT7981=y
++CONFIG_PRE_CON_BUF_ADDR=0x4007EF00
++CONFIG_DEBUG_UART_BASE=0x11002000
++CONFIG_DEBUG_UART_CLOCK=40000000
++CONFIG_SYS_LOAD_ADDR=0x46000000
++CONFIG_DEBUG_UART=y
++CONFIG_FIT=y
++CONFIG_BOOTDELAY=30
++CONFIG_AUTOBOOT_KEYED=y
++CONFIG_AUTOBOOT_MENU_SHOW=y
++CONFIG_DEFAULT_FDT_FILE="mediatek/mt7981-abt-asr3000.dtb"
++CONFIG_LOGLEVEL=7
++CONFIG_PRE_CONSOLE_BUFFER=y
++CONFIG_LOG=y
++CONFIG_BOARD_LATE_INIT=y
++CONFIG_HUSH_PARSER=y
++CONFIG_SYS_PROMPT="MT7981> "
++CONFIG_CMD_CPU=y
++CONFIG_CMD_LICENSE=y
++CONFIG_CMD_BOOTMENU=y
++CONFIG_CMD_ASKENV=y
++CONFIG_CMD_ERASEENV=y
++CONFIG_CMD_ENV_FLAGS=y
++CONFIG_CMD_STRINGS=y
++CONFIG_CMD_DM=y
++CONFIG_CMD_GPIO=y
++CONFIG_CMD_GPT=y
++CONFIG_CMD_MTD=y
++CONFIG_CMD_PART=y
++CONFIG_CMD_DHCP=y
++CONFIG_CMD_TFTPSRV=y
++CONFIG_CMD_RARP=y
++CONFIG_CMD_PING=y
++CONFIG_CMD_CDP=y
++CONFIG_CMD_SNTP=y
++CONFIG_CMD_DNS=y
++CONFIG_CMD_LINK_LOCAL=y
++CONFIG_CMD_PXE=y
++CONFIG_CMD_CACHE=y
++CONFIG_CMD_PSTORE=y
++CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000
++CONFIG_CMD_UUID=y
++CONFIG_CMD_HASH=y
++CONFIG_CMD_SMC=y
++CONFIG_CMD_UBI=y
++CONFIG_CMD_UBI_RENAME=y
++CONFIG_OF_EMBED=y
++CONFIG_ENV_OVERWRITE=y
++CONFIG_ENV_IS_IN_UBI=y
++CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
++CONFIG_ENV_UBI_PART="ubi"
++CONFIG_ENV_UBI_VOLUME="ubootenv"
++CONFIG_ENV_UBI_VOLUME_REDUND="ubootenv2"
++CONFIG_SYS_RELOC_GD_ENV_ADDR=y
++CONFIG_USE_DEFAULT_ENV_FILE=y
++CONFIG_DEFAULT_ENV_FILE="abt_asr3000_env"
++CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
++CONFIG_VERSION_VARIABLE=y
++CONFIG_NET_RANDOM_ETHADDR=y
++CONFIG_NETCONSOLE=y
++CONFIG_USE_IPADDR=y
++CONFIG_IPADDR="192.168.1.1"
++CONFIG_USE_SERVERIP=y
++CONFIG_SERVERIP="192.168.1.254"
++CONFIG_REGMAP=y
++CONFIG_SYSCON=y
++CONFIG_BUTTON=y
++CONFIG_BUTTON_GPIO=y
++CONFIG_CLK=y
++CONFIG_GPIO_HOG=y
++CONFIG_LED=y
++CONFIG_LED_BLINK=y
++CONFIG_LED_GPIO=y
++# CONFIG_MMC is not set
++CONFIG_MTD=y
++CONFIG_DM_MTD=y
++CONFIG_MTD_SPI_NAND=y
++CONFIG_MTD_UBI_FASTMAP=y
++CONFIG_PHY_FIXED=y
++CONFIG_MEDIATEK_ETH=y
++CONFIG_PHY=y
++CONFIG_PINCTRL=y
++CONFIG_PINCONF=y
++CONFIG_PINCTRL_MT7981=y
++CONFIG_POWER_DOMAIN=y
++CONFIG_MTK_POWER_DOMAIN=y
++CONFIG_DM_REGULATOR=y
++CONFIG_DM_REGULATOR_FIXED=y
++CONFIG_DM_REGULATOR_GPIO=y
++CONFIG_RAM=y
++CONFIG_DM_SERIAL=y
++CONFIG_MTK_SERIAL=y
++CONFIG_SPI=y
++CONFIG_DM_SPI=y
++CONFIG_MTK_SPIM=y
++CONFIG_ZSTD=y
++CONFIG_HEXDUMP=y
++CONFIG_LMB_MAX_REGIONS=64
+--- /dev/null
++++ b/arch/arm/dts/mt7981-abt-asr3000.dts
+@@ -0,0 +1,176 @@
++// SPDX-License-Identifier: GPL-2.0-or-later
++
++/dts-v1/;
++#include "mt7981.dtsi"
++#include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/input/linux-event-codes.h>
++
++/ {
++ #address-cells = <1>;
++ #size-cells = <1>;
++ model = "ABT ASR3000";
++ compatible = "mediatek,mt7981", "mediatek,mt7981-rfb";
++
++ chosen {
++ stdout-path = &uart0;
++ tick-timer = &timer0;
++ };
++
++ memory at 40000000 {
++ device_type = "memory";
++ reg = <0x40000000 0x10000000>;
++ };
++
++ gpio-keys {
++ compatible = "gpio-keys";
++
++
++ button-reset {
++ label = "reset";
++ linux,code = <KEY_RESTART>;
++ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
++ };
++
++ button-wps {
++ label = "mesh";
++ linux,code = <BTN_9>;
++ linux,input-type = <EV_SW>;
++ gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
++ };
++ };
++
++ gpio-leds {
++ compatible = "gpio-leds";
++
++ led-0 {
++ label = "red:wan";
++ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
++ default-state = "off";
++ };
++
++ led-1 {
++ label = "green:wan";
++ gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
++ default-state = "off";
++ };
++
++ mesh_led: led-2 {
++ label = "green:mesh";
++ gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
++ default-state = "on";
++ };
++
++ led-3 {
++ label = "green:wlan2g";
++ gpios = <&gpio 34 GPIO_ACTIVE_LOW>;
++ default-state = "off";
++ };
++
++ led-4 {
++ label = "green:wlan5g";
++ gpios = <&gpio 35 GPIO_ACTIVE_LOW>;
++ default-state = "off";
++ };
++ };
++};
++
++ð {
++ status = "okay";
++ mediatek,gmac-id = <0>;
++ phy-mode = "2500base-x";
++ mediatek,switch = "mt7531";
++ reset-gpios = <&gpio 39 GPIO_ACTIVE_HIGH>;
++
++ fixed-link {
++ speed = <2500>;
++ full-duplex;
++ };
++};
++
++&pinctrl {
++ spi_flash_pins: spi0-pins-func-1 {
++ mux {
++ function = "flash";
++ groups = "spi0", "spi0_wp_hold";
++ };
++
++ conf-pu {
++ pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP";
++ drive-strength = <MTK_DRIVE_8mA>;
++ bias-pull-up = <MTK_PUPD_SET_R1R0_00>;
++ };
++
++ conf-pd {
++ pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO";
++ drive-strength = <MTK_DRIVE_8mA>;
++ bias-pull-down = <MTK_PUPD_SET_R1R0_00>;
++ };
++ };
++};
++
++&spi0 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&spi_flash_pins>;
++ status = "okay";
++ must_tx;
++ enhance_timing;
++ dma_ext;
++ ipm_design;
++ support_quad;
++ tick_dly = <2>;
++ sample_sel = <0>;
++
++ spi_nand at 0 {
++ compatible = "spi-nand";
++ reg = <0>;
++ spi-max-frequency = <52000000>;
++
++ partitions {
++ compatible = "fixed-partitions";
++ #address-cells = <1>;
++ #size-cells = <1>;
++
++ partition at 0 {
++ label = "bl2";
++ reg = <0x0 0x100000>;
++ };
++
++ partition at 100000 {
++ label = "u-boot-env";
++ reg = <0x100000 0x80000>;
++ };
++
++ partition at 180000 {
++ label = "art";
++ reg = <0x180000 0x100000>;
++ };
++
++ partition at 280000 {
++ label = "factory";
++ reg = <0x280000 0x100000>;
++ };
++
++ partition at 380000 {
++ label = "fip";
++ reg = <0x380000 0x200000>;
++ };
++
++ partition at 580000 {
++ label = "ubi";
++ reg = <0x580000 0x7a80000>;
++ compatible = "linux,ubi";
++ };
++ };
++ };
++};
++
++&uart0 {
++ mediatek,force-highspeed;
++ status = "okay";
++};
++
++&watchdog {
++ status = "disabled";
++};
+--- /dev/null
++++ b/abt_asr3000_env
+@@ -0,0 +1,55 @@
++ipaddr=192.168.1.1
++serverip=192.168.1.254
++loadaddr=0x46000000
++console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0
++bootargs=root=/dev/fit0 rootwait
++bootcmd=if pstore check ; then run boot_recovery ; else run boot_ubi ; fi
++bootconf=config-1
++bootdelay=0
++bootfile=openwrt-mediatek-filogic-abt_asr3000-initramfs-recovery.itb
++bootfile_bl2=openwrt-mediatek-filogic-abt_asr3000-preloader.bin
++bootfile_fip=openwrt-mediatek-filogic-abt_asr3000-bl31-uboot.fip
++bootfile_upg=openwrt-mediatek-filogic-abt_asr3000-squashfs-sysupgrade.itb
++bootled_pwr=green:mesh
++bootled_rec=green:mesh
++bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60
++bootmenu_default=0
++bootmenu_delay=0
++bootmenu_title= [0;34m( ( ( [1;39mOpenWrt[0;34m ) ) )
++bootmenu_0=Initialize environment.=run _firstboot
++bootmenu_0d=Run default boot command.=run boot_default
++bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return
++bootmenu_2=Boot production system from NAND.=run boot_production ; run bootmenu_confirm_return
++bootmenu_3=Boot recovery system from NAND.=run boot_recovery ; run bootmenu_confirm_return
++bootmenu_4=Load production system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_production ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
++bootmenu_5=Load recovery system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_recovery ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
++bootmenu_6=[31mLoad BL31+U-Boot FIP via TFTP then write to NAND.[0m=run boot_tftp_write_fip ; run bootmenu_confirm_return
++bootmenu_7=[31mLoad BL2 preloader via TFTP then write to NAND.[0m=run boot_tftp_write_bl2 ; run bootmenu_confirm_return
++bootmenu_8=Reboot.=reset
++bootmenu_9=Reset all settings to factory defaults.=run reset_factory ; reset
++boot_first=if button reset ; then led $bootled_rec on ; run boot_tftp_recovery ; setenv flag_recover 1 ; run boot_default ; fi ; bootmenu
++boot_default=if env exists flag_recover ; then else run bootcmd ; fi ; run boot_recovery ; setenv replacevol 1 ; run boot_tftp_forever
++boot_production=led $bootled_pwr on ; run ubi_read_production && bootm $loadaddr#$bootconf ; led $bootled_pwr off
++boot_recovery=led $bootled_rec on ; run ubi_read_recovery && bootm $loadaddr#$bootconf ; led $bootled_rec off
++boot_ubi=run boot_production ; run boot_recovery ; run boot_tftp_forever
++boot_tftp_forever=led $bootled_rec on ; while true ; do run boot_tftp_recovery ; sleep 1 ; done
++boot_tftp_production=tftpboot $loadaddr $bootfile_upg && env exists replacevol && iminfo $loadaddr && run ubi_write_production ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
++boot_tftp_recovery=tftpboot $loadaddr $bootfile && env exists replacevol && iminfo $loadaddr && run ubi_write_recovery ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
++boot_tftp=tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf
++boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run mtd_write_fip && run reset_factory
++boot_tftp_write_bl2=tftpboot $loadaddr $bootfile_bl2 && run mtd_write_bl2
++reset_factory=ubi part ubi ; mw $loadaddr 0x0 0x800 ; ubi write $loadaddr ubootenv 0x800 ; ubi write $loadaddr ubootenv2 0x800
++mtd_write_fip=mtd erase fip && mtd write fip $loadaddr
++mtd_write_bl2=mtd erase bl2 && mtd write bl2 $loadaddr
++ubi_create_env=ubi check ubootenv || ubi create ubootenv 0x100000 dynamic || run ubi_format ; ubi check ubootenv2 || ubi create ubootenv2 0x100000 dynamic || run ubi_format
++ubi_format=ubi detach ; mtd erase ubi && ubi part ubi ; reset
++ubi_prepare_rootfs=if ubi check rootfs_data ; then else if env exists rootfs_data_max ; then ubi create rootfs_data $rootfs_data_max dynamic || ubi create rootfs_data - dynamic ; else ubi create rootfs_data - dynamic ; fi ; fi
++ubi_read_production=ubi read $loadaddr fit && iminfo $loadaddr && run ubi_prepare_rootfs
++ubi_read_recovery=ubi check recovery && ubi read $loadaddr recovery
++ubi_remove_rootfs=ubi check rootfs_data && ubi remove rootfs_data
++ubi_write_production=ubi check fit && ubi remove fit ; run ubi_remove_rootfs ; ubi create fit $filesize dynamic && ubi write $loadaddr fit $filesize
++ubi_write_recovery=ubi check recovery && ubi remove recovery ; run ubi_remove_rootfs ; ubi create recovery $filesize dynamic && ubi write $loadaddr recovery $filesize
++_init_env=setenv _init_env ; run ubi_create_env ; saveenv ; saveenv
++_firstboot=setenv _firstboot ; run _switch_to_menu ; run _init_env ; run boot_first
++_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title
++_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title [33m$ver[0m"
diff --git a/target/linux/mediatek/dts/mt7981b-abt-asr3000.dts b/target/linux/mediatek/dts/mt7981b-abt-asr3000.dts
new file mode 100644
index 0000000000..dd07def303
--- /dev/null
+++ b/target/linux/mediatek/dts/mt7981b-abt-asr3000.dts
@@ -0,0 +1,275 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include "mt7981.dtsi"
+
+/ {
+ model = "ABT ASR3000";
+ compatible = "abt,asr3000", "mediatek,mt7981";
+
+ aliases {
+ led-boot = &mesh_led;
+ led-failsafe = &mesh_led;
+ led-upgrade = &mesh_led;
+ label-mac-device = &gmac1;
+ serial0 = &uart0;
+ };
+
+ chosen {
+ rootdisk = <&ubi_rootdisk>;
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory at 40000000 {
+ reg = <0 0x40000000 0 0x10000000>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ button-reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&pio 1 GPIO_ACTIVE_LOW>;
+ };
+
+ button-mesh {
+ label = "mesh";
+ linux,code = <BTN_9>;
+ linux,input-type = <EV_SW>;
+ gpios = <&pio 0 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ led-0 {
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_RED>;
+ gpios = <&pio 4 GPIO_ACTIVE_LOW>;
+ };
+
+ led-1 {
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&pio 8 GPIO_ACTIVE_LOW>;
+ };
+
+ mesh_led: led-2 {
+ label = "green:mesh";
+ gpios = <&pio 15 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-3 {
+ function = LED_FUNCTION_WLAN_2GHZ;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&pio 34 GPIO_ACTIVE_LOW>;
+ };
+
+ led-4 {
+ function = LED_FUNCTION_WLAN_5GHZ;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&pio 35 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+ð {
+ status = "okay";
+
+ gmac0: mac at 0 {
+ compatible = "mediatek,eth-mac";
+ reg = <0>;
+ phy-mode = "2500base-x";
+
+ nvmem-cells = <&macaddr_art_0 0>;
+ nvmem-cell-names = "mac-address";
+
+ fixed-link {
+ speed = <2500>;
+ full-duplex;
+ pause;
+ };
+ };
+
+ gmac1: mac at 1 {
+ compatible = "mediatek,eth-mac";
+ reg = <1>;
+ phy-mode = "gmii";
+ phy-handle = <&int_gbe_phy>;
+
+ nvmem-cells = <&macaddr_art_0 0>;
+ nvmem-cell-names = "mac-address";
+ };
+};
+
+&mdio_bus {
+ switch: switch at 1f {
+ compatible = "mediatek,mt7531";
+ reg = <31>;
+ reset-gpios = <&pio 39 GPIO_ACTIVE_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&pio>;
+ interrupts = <38 IRQ_TYPE_LEVEL_HIGH>;
+ };
+};
+
+&pio {
+ spi0_flash_pins: spi0-pins {
+ mux {
+ function = "spi";
+ groups = "spi0", "spi0_wp_hold";
+ };
+
+ conf-pu {
+ pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP";
+ drive-strength = <8>;
+ mediatek,pull-up-adv = <0>; /* bias-disable */
+ };
+
+ conf-pd {
+ pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO";
+ drive-strength = <8>;
+ mediatek,pull-up-adv = <0>; /* bias-disable */
+ };
+ };
+};
+
+&spi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_flash_pins>;
+ status = "okay";
+
+ spi_nand: flash at 0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spi-nand";
+ reg = <0>;
+
+ spi-max-frequency = <52000000>;
+ spi-tx-bus-width = <4>;
+ spi-rx-bus-width = <4>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition at 0 {
+ label = "bl2";
+ reg = <0x0 0x100000>;
+ read-only;
+ };
+
+ partition at 100000 {
+ label = "u-boot-env";
+ reg = <0x100000 0x80000>;
+ };
+
+ partition at 180000 {
+ label = "art";
+ reg = <0x180000 0x100000>;
+ read-only;
+
+ nvmem-layout {
+ compatible = "fixed-layout";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_art_0: macaddr at 0 {
+ compatible = "mac-base";
+ reg = <0x0 0x6>;
+ #nvmem-cell-cells = <1>;
+ };
+ };
+ };
+
+ partition at 280000 {
+ label = "factory";
+ reg = <0x280000 0x100000>;
+ read-only;
+
+ nvmem-layout {
+ compatible = "fixed-layout";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ eeprom_factory_0: eeprom at 0 {
+ reg = <0x0 0x1000>;
+ };
+ };
+ };
+
+ partition at 380000 {
+ label = "fip";
+ reg = <0x380000 0x200000>;
+ read-only;
+ };
+
+ partition at 580000 {
+ compatible = "linux,ubi";
+ label = "ubi";
+ reg = <0x580000 0x7a80000>;
+
+ volumes {
+ ubi_rootdisk: ubi-volume-fit {
+ volname = "fit";
+ };
+ };
+ };
+ };
+ };
+};
+
+&switch {
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
+ reg = <0>;
+ label = "lan3";
+ };
+
+ port at 1 {
+ reg = <1>;
+ label = "lan2";
+ };
+
+ port at 2 {
+ reg = <2>;
+ label = "lan1";
+ };
+
+ port at 6 {
+ reg = <6>;
+ ethernet = <&gmac0>;
+ phy-mode = "2500base-x";
+
+ fixed-link {
+ speed = <2500>;
+ full-duplex;
+ pause;
+ };
+ };
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&watchdog {
+ status = "okay";
+};
+
+&wifi {
+ nvmem-cells = <&eeprom_factory_0>;
+ nvmem-cell-names = "eeprom";
+ status = "okay";
+};
diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds b/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds
index 16d8617c54..82f61dd5d9 100644
--- a/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds
+++ b/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds
@@ -6,6 +6,11 @@ board=$(board_name)
board_config_update
case $board in
+abt,asr3000)
+ ucidef_set_led_netdev "wan" "WAN" "green:wan" "eth1"
+ ucidef_set_led_netdev "wlan2g" "WLAN2G" "green:wlan-2ghz" "phy0-ap0"
+ ucidef_set_led_netdev "wlan5g" "WLAN5G" "green:wlan-5ghz" "phy1-ap0"
+ ;;
confiabits,mt7981)
ucidef_set_led_netdev "lan1" "lan1" "blue:lan-1" "lan1" "link tx rx"
ucidef_set_led_netdev "lan2" "lan2" "blue:lan-2" "lan2" "link tx rx"
diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network
index c9c8a87f54..8246a3b004 100644
--- a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network
+++ b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network
@@ -11,6 +11,13 @@ mediatek_setup_interfaces()
acelink,ew-7886cax)
ucidef_set_interface_lan "eth0" "dhcp"
;;
+ abt,asr3000|\
+ cmcc,rax3000m|\
+ h3c,magic-nx30-pro|\
+ nokia,ea0326gmp|\
+ zbtlink,zbt-z8103ax)
+ ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" eth1
+ ;;
acer,predator-w6)
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 game" eth1
;;
@@ -46,12 +53,6 @@ mediatek_setup_interfaces()
bananapi,bpi-r4-poe)
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 eth1" "wan eth2"
;;
- cmcc,rax3000m|\
- h3c,magic-nx30-pro|\
- nokia,ea0326gmp|\
- zbtlink,zbt-z8103ax)
- ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" eth1
- ;;
comfast,cf-e393ax)
ucidef_set_interfaces_lan_wan "lan1" eth1
;;
diff --git a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac
index 98b1023e3e..a16f5e7eb4 100644
--- a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac
+++ b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac
@@ -10,6 +10,13 @@ PHYNBR=${DEVPATH##*/phy}
board=$(board_name)
case "$board" in
+ abt,asr3000)
+ # Originally, phy1 is phy0 mac with LA bit set. However, this would conflict
+ # addresses on multiple VIFs with the other radio. Use label mac to set LA bit.
+ addr=$(cat /sys/class/net/eth1/address)
+ [ "$PHYNBR" = "0" ] && macaddr_add $addr 1 > /sys${DEVPATH}/macaddress
+ [ "$PHYNBR" = "1" ] && macaddr_setbit_la $addr > /sys${DEVPATH}/macaddress
+ ;;
acer,predator-w6)
key_path="/var/qcidata/data"
[ "$PHYNBR" = "0" ] && cat $key_path/2gMAC > /sys${DEVPATH}/macaddress
diff --git a/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh b/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh
index 3b1b2f7fa6..4005154db2 100755
--- a/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh
+++ b/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh
@@ -64,6 +64,22 @@ platform_do_upgrade() {
local board=$(board_name)
case "$board" in
+ abt,asr3000|\
+ bananapi,bpi-r3|\
+ bananapi,bpi-r3-mini|\
+ bananapi,bpi-r4|\
+ bananapi,bpi-r4-poe|\
+ cmcc,rax3000m|\
+ jdcloud,re-cp-03|\
+ mediatek,mt7988a-rfb|\
+ nokia,ea0326gmp|\
+ openwrt,one|\
+ tplink,tl-xdr4288|\
+ tplink,tl-xdr6086|\
+ tplink,tl-xdr6088|\
+ xiaomi,redmi-router-ax6000-ubootmod)
+ fit_do_upgrade "$1"
+ ;;
acer,predator-w6|\
smartrg,sdg-8612|\
smartrg,sdg-8614|\
@@ -82,21 +98,6 @@ platform_do_upgrade() {
CI_KERNPART="linux"
nand_do_upgrade "$1"
;;
- bananapi,bpi-r3|\
- bananapi,bpi-r3-mini|\
- bananapi,bpi-r4|\
- bananapi,bpi-r4-poe|\
- cmcc,rax3000m|\
- jdcloud,re-cp-03|\
- mediatek,mt7988a-rfb|\
- nokia,ea0326gmp|\
- openwrt,one|\
- tplink,tl-xdr4288|\
- tplink,tl-xdr6086|\
- tplink,tl-xdr6088|\
- xiaomi,redmi-router-ax6000-ubootmod)
- fit_do_upgrade "$1"
- ;;
cudy,re3000-v1|\
cudy,wr3000-v1|\
yuncore,ax835)
diff --git a/target/linux/mediatek/image/filogic.mk b/target/linux/mediatek/image/filogic.mk
index 94b3098b3d..aa844671e3 100644
--- a/target/linux/mediatek/image/filogic.mk
+++ b/target/linux/mediatek/image/filogic.mk
@@ -105,6 +105,30 @@ define Build/cetron-header
rm $@.tmp
endef
+define Device/abt_asr3000
+ DEVICE_VENDOR := ABT
+ DEVICE_MODEL := ASR3000
+ DEVICE_DTS := mt7981b-abt-asr3000
+ DEVICE_DTS_DIR := ../dts
+ DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
+ UBINIZE_OPTS := -E 5
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ KERNEL_IN_UBI := 1
+ UBOOTENV_IN_UBI := 1
+ IMAGES := sysupgrade.itb
+ KERNEL_INITRAMFS_SUFFIX := -recovery.itb
+ KERNEL := kernel-bin | gzip
+ KERNEL_INITRAMFS := kernel-bin | lzma | \
+ fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
+ IMAGE/sysupgrade.itb := append-kernel | \
+ fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata
+ ARTIFACTS := preloader.bin bl31-uboot.fip
+ ARTIFACT/preloader.bin := mt7981-bl2 spim-nand-ddr3
+ ARTIFACT/bl31-uboot.fip := mt7981-bl31-uboot abt_asr3000
+endef
+TARGET_DEVICES += abt_asr3000
+
define Device/acelink_ew-7886cax
DEVICE_VENDOR := Acelink
DEVICE_MODEL := EW-7886CAX
More information about the lede-commits
mailing list