[openwrt/openwrt] uboot-bcm53xx: bump to 2024.01
LEDE Commits
lede-commits at lists.infradead.org
Sat Jan 20 10:38:55 PST 2024
rmilecki pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/f1a447bdb5f25a61402f513e68a216a1ae8c7c97
commit f1a447bdb5f25a61402f513e68a216a1ae8c7c97
Author: Linus Walleij <linus.walleij at linaro.org>
AuthorDate: Sat Jan 20 00:08:42 2024 +0100
uboot-bcm53xx: bump to 2024.01
Bump the U-Boot version used for BCM53xx to the 2024.01
version that includes all the needed patches upstream, so we
can get rid of those in the process.
Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
---
package/boot/uboot-bcm53xx/Makefile | 4 +-
.../0001-nand-brcmnand-add-iproc-support.patch | 199 -------
...nand-nand_base-Handle-algorithm-selection.patch | 80 ---
...Import-device-tree-for-Broadcom-Northstar.patch | 659 ---------------------
...d-support-for-the-Broadcom-Northstar-SoCs.patch | 66 ---
...05-board-Add-new-Broadcom-Northstar-board.patch | 372 ------------
6 files changed, 2 insertions(+), 1378 deletions(-)
diff --git a/package/boot/uboot-bcm53xx/Makefile b/package/boot/uboot-bcm53xx/Makefile
index ab80b9608a..f1c026e25b 100644
--- a/package/boot/uboot-bcm53xx/Makefile
+++ b/package/boot/uboot-bcm53xx/Makefile
@@ -1,7 +1,7 @@
include $(TOPDIR)/rules.mk
-PKG_VERSION:=2023.04
-PKG_HASH:=e31cac91545ff41b71cec5d8c22afd695645cd6e2a442ccdacacd60534069341
+PKG_VERSION:=2024.01
+PKG_HASH:=b99611f1ed237bf3541bdc8434b68c96a6e05967061f992443cb30aabebef5b3
PKG_RELEASE:=$(AUTORELEASE)
include $(INCLUDE_DIR)/u-boot.mk
diff --git a/package/boot/uboot-bcm53xx/patches/0001-nand-brcmnand-add-iproc-support.patch b/package/boot/uboot-bcm53xx/patches/0001-nand-brcmnand-add-iproc-support.patch
deleted file mode 100644
index fe6f4d944a..0000000000
--- a/package/boot/uboot-bcm53xx/patches/0001-nand-brcmnand-add-iproc-support.patch
+++ /dev/null
@@ -1,199 +0,0 @@
-From 854dc4b790ce1291326d52b8405ebe771bff2edd Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij at linaro.org>
-Date: Wed, 8 Mar 2023 22:42:31 +0100
-Subject: [PATCH 1/5] nand: brcmnand: add iproc support
-
-Add support for the iproc Broadcom NAND controller,
-used in Northstar SoCs for example. Based on the Linux
-driver.
-
-Cc: Philippe Reynes <philippe.reynes at softathome.com>
-Cc: Dario Binacchi <dario.binacchi at amarulasolutions.com>
-Reviewed-by: Michael Trimarchi <michael at amarulasolutions.com>
-Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
-Acked-by: William Zhang <william.zhang at broadcom.com>
-Link: https://lore.kernel.org/all/20230308214231.378013-1-linus.walleij@linaro.org/
-Signed-off-by: Dario Binacchi <dario.binacchi at amarulasolutions.com>
----
- drivers/mtd/nand/raw/Kconfig | 7 +
- drivers/mtd/nand/raw/brcmnand/Makefile | 1 +
- drivers/mtd/nand/raw/brcmnand/iproc_nand.c | 148 +++++++++++++++++++++
- 3 files changed, 156 insertions(+)
- create mode 100644 drivers/mtd/nand/raw/brcmnand/iproc_nand.c
-
---- a/drivers/mtd/nand/raw/Kconfig
-+++ b/drivers/mtd/nand/raw/Kconfig
-@@ -156,6 +156,13 @@ config NAND_BRCMNAND_63158
- help
- Enable support for broadcom nand driver on bcm63158.
-
-+config NAND_BRCMNAND_IPROC
-+ bool "Support Broadcom NAND controller on the iproc family"
-+ depends on NAND_BRCMNAND
-+ help
-+ Enable support for broadcom nand driver on the Broadcom
-+ iproc family such as Northstar (BCM5301x, BCM4708...)
-+
- config NAND_DAVINCI
- bool "Support TI Davinci NAND controller"
- select SYS_NAND_SELF_INIT if TARGET_DA850EVM
---- a/drivers/mtd/nand/raw/brcmnand/Makefile
-+++ b/drivers/mtd/nand/raw/brcmnand/Makefile
-@@ -6,5 +6,6 @@ obj-$(CONFIG_NAND_BRCMNAND_6753) += bcm6
- obj-$(CONFIG_NAND_BRCMNAND_68360) += bcm68360_nand.o
- obj-$(CONFIG_NAND_BRCMNAND_6838) += bcm6838_nand.o
- obj-$(CONFIG_NAND_BRCMNAND_6858) += bcm6858_nand.o
-+obj-$(CONFIG_NAND_BRCMNAND_IPROC) += iproc_nand.o
- obj-$(CONFIG_NAND_BRCMNAND) += brcmnand.o
- obj-$(CONFIG_NAND_BRCMNAND) += brcmnand_compat.o
---- /dev/null
-+++ b/drivers/mtd/nand/raw/brcmnand/iproc_nand.c
-@@ -0,0 +1,148 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Code borrowed from the Linux driver
-+ * Copyright (C) 2015 Broadcom Corporation
-+ */
-+
-+#include <common.h>
-+#include <asm/io.h>
-+#include <memalign.h>
-+#include <nand.h>
-+#include <linux/bitops.h>
-+#include <linux/err.h>
-+#include <linux/errno.h>
-+#include <linux/io.h>
-+#include <linux/ioport.h>
-+#include <dm.h>
-+
-+#include "brcmnand.h"
-+
-+struct iproc_nand_soc {
-+ struct brcmnand_soc soc;
-+ void __iomem *idm_base;
-+ void __iomem *ext_base;
-+};
-+
-+#define IPROC_NAND_CTLR_READY_OFFSET 0x10
-+#define IPROC_NAND_CTLR_READY BIT(0)
-+
-+#define IPROC_NAND_IO_CTRL_OFFSET 0x00
-+#define IPROC_NAND_APB_LE_MODE BIT(24)
-+#define IPROC_NAND_INT_CTRL_READ_ENABLE BIT(6)
-+
-+static bool iproc_nand_intc_ack(struct brcmnand_soc *soc)
-+{
-+ struct iproc_nand_soc *priv =
-+ container_of(soc, struct iproc_nand_soc, soc);
-+ void __iomem *mmio = priv->ext_base + IPROC_NAND_CTLR_READY_OFFSET;
-+ u32 val = brcmnand_readl(mmio);
-+
-+ if (val & IPROC_NAND_CTLR_READY) {
-+ brcmnand_writel(IPROC_NAND_CTLR_READY, mmio);
-+ return true;
-+ }
-+
-+ return false;
-+}
-+
-+static void iproc_nand_intc_set(struct brcmnand_soc *soc, bool en)
-+{
-+ struct iproc_nand_soc *priv =
-+ container_of(soc, struct iproc_nand_soc, soc);
-+ void __iomem *mmio = priv->idm_base + IPROC_NAND_IO_CTRL_OFFSET;
-+ u32 val = brcmnand_readl(mmio);
-+
-+ if (en)
-+ val |= IPROC_NAND_INT_CTRL_READ_ENABLE;
-+ else
-+ val &= ~IPROC_NAND_INT_CTRL_READ_ENABLE;
-+
-+ brcmnand_writel(val, mmio);
-+}
-+
-+static void iproc_nand_apb_access(struct brcmnand_soc *soc, bool prepare,
-+ bool is_param)
-+{
-+ struct iproc_nand_soc *priv =
-+ container_of(soc, struct iproc_nand_soc, soc);
-+ void __iomem *mmio = priv->idm_base + IPROC_NAND_IO_CTRL_OFFSET;
-+ u32 val;
-+
-+ val = brcmnand_readl(mmio);
-+
-+ /*
-+ * In the case of BE or when dealing with NAND data, always configure
-+ * the APB bus to LE mode before accessing the FIFO and back to BE mode
-+ * after the access is done
-+ */
-+ if (IS_ENABLED(CONFIG_SYS_BIG_ENDIAN) || !is_param) {
-+ if (prepare)
-+ val |= IPROC_NAND_APB_LE_MODE;
-+ else
-+ val &= ~IPROC_NAND_APB_LE_MODE;
-+ } else { /* when in LE accessing the parameter page, keep APB in BE */
-+ val &= ~IPROC_NAND_APB_LE_MODE;
-+ }
-+
-+ brcmnand_writel(val, mmio);
-+}
-+
-+static int iproc_nand_probe(struct udevice *dev)
-+{
-+ struct udevice *pdev = dev;
-+ struct iproc_nand_soc *priv = dev_get_priv(dev);
-+ struct brcmnand_soc *soc;
-+ struct resource res;
-+ int ret;
-+
-+ soc = &priv->soc;
-+
-+ ret = dev_read_resource_byname(pdev, "iproc-idm", &res);
-+ if (ret)
-+ return ret;
-+
-+ priv->idm_base = devm_ioremap(dev, res.start, resource_size(&res));
-+ if (IS_ERR(priv->idm_base))
-+ return PTR_ERR(priv->idm_base);
-+
-+ ret = dev_read_resource_byname(pdev, "iproc-ext", &res);
-+ if (ret)
-+ return ret;
-+
-+ priv->ext_base = devm_ioremap(dev, res.start, resource_size(&res));
-+ if (IS_ERR(priv->ext_base))
-+ return PTR_ERR(priv->ext_base);
-+
-+ soc->ctlrdy_ack = iproc_nand_intc_ack;
-+ soc->ctlrdy_set_enabled = iproc_nand_intc_set;
-+ soc->prepare_data_bus = iproc_nand_apb_access;
-+
-+ return brcmnand_probe(pdev, soc);
-+}
-+
-+static const struct udevice_id iproc_nand_dt_ids[] = {
-+ {
-+ .compatible = "brcm,nand-iproc",
-+ },
-+ { /* sentinel */ }
-+};
-+
-+U_BOOT_DRIVER(iproc_nand) = {
-+ .name = "iproc-nand",
-+ .id = UCLASS_MTD,
-+ .of_match = iproc_nand_dt_ids,
-+ .probe = iproc_nand_probe,
-+ .priv_auto = sizeof(struct iproc_nand_soc),
-+};
-+
-+void board_nand_init(void)
-+{
-+ struct udevice *dev;
-+ int ret;
-+
-+ ret = uclass_get_device_by_driver(UCLASS_MTD,
-+ DM_DRIVER_GET(iproc_nand), &dev);
-+ if (ret && ret != -ENODEV)
-+ pr_err("Failed to initialize %s. (error %d)\n", dev->name,
-+ ret);
-+}
diff --git a/package/boot/uboot-bcm53xx/patches/0002-mtd-rawnand-nand_base-Handle-algorithm-selection.patch b/package/boot/uboot-bcm53xx/patches/0002-mtd-rawnand-nand_base-Handle-algorithm-selection.patch
deleted file mode 100644
index eb2a5ec703..0000000000
--- a/package/boot/uboot-bcm53xx/patches/0002-mtd-rawnand-nand_base-Handle-algorithm-selection.patch
+++ /dev/null
@@ -1,80 +0,0 @@
-From d75483f8892f3a0dfb8f5aa4147e72c02c8b034c Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij at linaro.org>
-Date: Fri, 7 Apr 2023 15:40:05 +0200
-Subject: [PATCH 2/5] mtd: rawnand: nand_base: Handle algorithm selection
-
-For BRCMNAND with 1-bit BCH ECC (BCH-1) such as used on the
-D-Link DIR-885L and DIR-890L routers, we need to explicitly
-select the ECC like this in the device tree:
-
- nand-ecc-algo = "bch";
- nand-ecc-strength = <1>;
- nand-ecc-step-size = <512>;
-
-This is handled by the Linux kernel but U-Boot core does
-not respect this. Fix it up by parsing the algorithm and
-preserve the behaviour using this property to select
-software BCH as far as possible.
-
-Reviewed-by: Michael Trimarchi <michael at amarulasolutions.com>
-Acked-by: William Zhang <william.zhang at broadcom.com>
-Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
-Tested-by: Tom Rini <trini at konsulko.com> [am335x_evm]
-Link: https://lore.kernel.org/all/20230407134008.1939717-3-linus.walleij@linaro.org/
-Signed-off-by: Dario Binacchi <dario.binacchi at amarulasolutions.com>
----
- drivers/mtd/nand/raw/nand_base.c | 29 +++++++++++++++++++++++++----
- 1 file changed, 25 insertions(+), 4 deletions(-)
-
---- a/drivers/mtd/nand/raw/nand_base.c
-+++ b/drivers/mtd/nand/raw/nand_base.c
-@@ -4487,6 +4487,7 @@ EXPORT_SYMBOL(nand_detect);
- static int nand_dt_init(struct mtd_info *mtd, struct nand_chip *chip, ofnode node)
- {
- int ret, ecc_mode = -1, ecc_strength, ecc_step;
-+ int ecc_algo = NAND_ECC_UNKNOWN;
- const char *str;
-
- ret = ofnode_read_s32_default(node, "nand-bus-width", -1);
-@@ -4512,10 +4513,22 @@ static int nand_dt_init(struct mtd_info
- ecc_mode = NAND_ECC_SOFT_BCH;
- }
-
-- if (ecc_mode == NAND_ECC_SOFT) {
-- str = ofnode_read_string(node, "nand-ecc-algo");
-- if (str && !strcmp(str, "bch"))
-- ecc_mode = NAND_ECC_SOFT_BCH;
-+ str = ofnode_read_string(node, "nand-ecc-algo");
-+ if (str) {
-+ /*
-+ * If we are in NAND_ECC_SOFT mode, just alter the
-+ * soft mode to BCH here. No change of algorithm.
-+ */
-+ if (ecc_mode == NAND_ECC_SOFT) {
-+ if (!strcmp(str, "bch"))
-+ ecc_mode = NAND_ECC_SOFT_BCH;
-+ } else {
-+ if (!strcmp(str, "bch")) {
-+ ecc_algo = NAND_ECC_BCH;
-+ } else if (!strcmp(str, "hamming")) {
-+ ecc_algo = NAND_ECC_HAMMING;
-+ }
-+ }
- }
-
- ecc_strength = ofnode_read_s32_default(node,
-@@ -4529,6 +4542,14 @@ static int nand_dt_init(struct mtd_info
- return -EINVAL;
- }
-
-+ /*
-+ * Chip drivers may have assigned default algorithms here,
-+ * onlt override it if we have found something explicitly
-+ * specified in the device tree.
-+ */
-+ if (ecc_algo != NAND_ECC_UNKNOWN)
-+ chip->ecc.algo = ecc_algo;
-+
- if (ecc_mode >= 0)
- chip->ecc.mode = ecc_mode;
-
diff --git a/package/boot/uboot-bcm53xx/patches/0003-arm-dts-Import-device-tree-for-Broadcom-Northstar.patch b/package/boot/uboot-bcm53xx/patches/0003-arm-dts-Import-device-tree-for-Broadcom-Northstar.patch
deleted file mode 100644
index 6a4eef77f8..0000000000
--- a/package/boot/uboot-bcm53xx/patches/0003-arm-dts-Import-device-tree-for-Broadcom-Northstar.patch
+++ /dev/null
@@ -1,659 +0,0 @@
-From 3d6098a662b7ff5b80c4b75c54fcd1b2baf9f150 Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij at linaro.org>
-Date: Mon, 24 Apr 2023 09:38:28 +0200
-Subject: [PATCH 3/5] arm: dts: Import device tree for Broadcom Northstar
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This brings in the main SoC device tree used by the
-Broadcom Northstar chipset, i.e. BCM4709x and BCM5301x.
-This is taken from the v6.3 Linux kernel.
-
-Cc: Rafał Miłecki <rafal at milecki.pl>
-Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
----
- arch/arm/dts/bcm5301x.dtsi | 581 ++++++++++++++++++++++++++++
- include/dt-bindings/clock/bcm-nsp.h | 51 +++
- 2 files changed, 632 insertions(+)
- create mode 100644 arch/arm/dts/bcm5301x.dtsi
- create mode 100644 include/dt-bindings/clock/bcm-nsp.h
-
---- /dev/null
-+++ b/arch/arm/dts/bcm5301x.dtsi
-@@ -0,0 +1,581 @@
-+/*
-+ * Broadcom BCM470X / BCM5301X ARM platform code.
-+ * Generic DTS part for all BCM53010, BCM53011, BCM53012, BCM53014, BCM53015,
-+ * BCM53016, BCM53017, BCM53018, BCM4707, BCM4708 and BCM4709 SoCs
-+ *
-+ * Copyright 2013-2014 Hauke Mehrtens <hauke at hauke-m.de>
-+ *
-+ * Licensed under the GNU/GPL. See COPYING for details.
-+ */
-+
-+#include <dt-bindings/clock/bcm-nsp.h>
-+#include <dt-bindings/gpio/gpio.h>
-+#include <dt-bindings/input/input.h>
-+#include <dt-bindings/interrupt-controller/irq.h>
-+#include <dt-bindings/interrupt-controller/arm-gic.h>
-+
-+/ {
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ interrupt-parent = <&gic>;
-+
-+ chipcommon-a-bus at 18000000 {
-+ compatible = "simple-bus";
-+ ranges = <0x00000000 0x18000000 0x00001000>;
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ uart0: serial at 300 {
-+ compatible = "ns16550";
-+ reg = <0x0300 0x100>;
-+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&iprocslow>;
-+ status = "disabled";
-+ };
-+
-+ uart1: serial at 400 {
-+ compatible = "ns16550";
-+ reg = <0x0400 0x100>;
-+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&iprocslow>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinmux_uart1>;
-+ status = "disabled";
-+ };
-+ };
-+
-+ mpcore-bus at 19000000 {
-+ compatible = "simple-bus";
-+ ranges = <0x00000000 0x19000000 0x00023000>;
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ a9pll: arm_clk at 0 {
-+ #clock-cells = <0>;
-+ compatible = "brcm,nsp-armpll";
-+ clocks = <&osc>;
-+ reg = <0x00000 0x1000>;
-+ };
-+
-+ scu at 20000 {
-+ compatible = "arm,cortex-a9-scu";
-+ reg = <0x20000 0x100>;
-+ };
-+
-+ timer at 20200 {
-+ compatible = "arm,cortex-a9-global-timer";
-+ reg = <0x20200 0x100>;
-+ interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
-+ clocks = <&periph_clk>;
-+ };
-+
-+ timer at 20600 {
-+ compatible = "arm,cortex-a9-twd-timer";
-+ reg = <0x20600 0x20>;
-+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
-+ IRQ_TYPE_EDGE_RISING)>;
-+ clocks = <&periph_clk>;
-+ };
-+
-+ watchdog at 20620 {
-+ compatible = "arm,cortex-a9-twd-wdt";
-+ reg = <0x20620 0x20>;
-+ interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
-+ IRQ_TYPE_EDGE_RISING)>;
-+ clocks = <&periph_clk>;
-+ };
-+
-+ gic: interrupt-controller at 21000 {
-+ compatible = "arm,cortex-a9-gic";
-+ #interrupt-cells = <3>;
-+ #address-cells = <0>;
-+ interrupt-controller;
-+ reg = <0x21000 0x1000>,
-+ <0x20100 0x100>;
-+ };
-+
-+ L2: cache-controller at 22000 {
-+ compatible = "arm,pl310-cache";
-+ reg = <0x22000 0x1000>;
-+ cache-unified;
-+ arm,shared-override;
-+ prefetch-data = <1>;
-+ prefetch-instr = <1>;
-+ cache-level = <2>;
-+ };
-+ };
-+
-+ pmu {
-+ compatible = "arm,cortex-a9-pmu";
-+ interrupts =
-+ <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
-+ <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
-+ };
-+
-+ clocks {
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ ranges;
-+
-+ osc: oscillator {
-+ #clock-cells = <0>;
-+ compatible = "fixed-clock";
-+ clock-frequency = <25000000>;
-+ };
-+
-+ iprocmed: iprocmed {
-+ #clock-cells = <0>;
-+ compatible = "fixed-factor-clock";
-+ clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>;
-+ clock-div = <2>;
-+ clock-mult = <1>;
-+ };
-+
-+ iprocslow: iprocslow {
-+ #clock-cells = <0>;
-+ compatible = "fixed-factor-clock";
-+ clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>;
-+ clock-div = <4>;
-+ clock-mult = <1>;
-+ };
-+
-+ periph_clk: periph_clk {
-+ #clock-cells = <0>;
-+ compatible = "fixed-factor-clock";
-+ clocks = <&a9pll>;
-+ clock-div = <2>;
-+ clock-mult = <1>;
-+ };
-+ };
-+
-+ axi at 18000000 {
-+ compatible = "brcm,bus-axi";
-+ reg = <0x18000000 0x1000>;
-+ ranges = <0x00000000 0x18000000 0x00100000>;
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ #interrupt-cells = <1>;
-+ interrupt-map-mask = <0x000fffff 0xffff>;
-+ interrupt-map =
-+ /* ChipCommon */
-+ <0x00000000 0 &gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
-+
-+ /* Switch Register Access Block */
-+ <0x00007000 0 &gic GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00007000 1 &gic GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00007000 2 &gic GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00007000 3 &gic GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00007000 4 &gic GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00007000 5 &gic GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00007000 6 &gic GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00007000 7 &gic GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00007000 8 &gic GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00007000 9 &gic GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00007000 10 &gic GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00007000 11 &gic GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00007000 12 &gic GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
-+
-+ /* PCIe Controller 0 */
-+ <0x00012000 0 &gic GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00012000 1 &gic GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00012000 2 &gic GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00012000 3 &gic GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00012000 4 &gic GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00012000 5 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-+
-+ /* PCIe Controller 1 */
-+ <0x00013000 0 &gic GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00013000 1 &gic GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00013000 2 &gic GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00013000 3 &gic GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00013000 4 &gic GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00013000 5 &gic GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
-+
-+ /* PCIe Controller 2 */
-+ <0x00014000 0 &gic GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00014000 1 &gic GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00014000 2 &gic GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00014000 3 &gic GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00014000 4 &gic GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00014000 5 &gic GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
-+
-+ /* USB 2.0 Controller */
-+ <0x00021000 0 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
-+
-+ /* USB 3.0 Controller */
-+ <0x00023000 0 &gic GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
-+
-+ /* Ethernet Controller 0 */
-+ <0x00024000 0 &gic GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
-+
-+ /* Ethernet Controller 1 */
-+ <0x00025000 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
-+
-+ /* Ethernet Controller 2 */
-+ <0x00026000 0 &gic GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
-+
-+ /* Ethernet Controller 3 */
-+ <0x00027000 0 &gic GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
-+
-+ /* NAND Controller */
-+ <0x00028000 0 &gic GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00028000 1 &gic GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00028000 2 &gic GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00028000 3 &gic GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00028000 4 &gic GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00028000 5 &gic GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00028000 6 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00028000 7 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-+
-+ chipcommon: chipcommon at 0 {
-+ reg = <0x00000000 0x1000>;
-+
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ interrupt-controller;
-+ #interrupt-cells = <2>;
-+ };
-+
-+ pcie0: pcie at 12000 {
-+ reg = <0x00012000 0x1000>;
-+ };
-+
-+ pcie1: pcie at 13000 {
-+ reg = <0x00013000 0x1000>;
-+ };
-+
-+ pcie2: pcie at 14000 {
-+ reg = <0x00014000 0x1000>;
-+ };
-+
-+ usb2: usb2 at 21000 {
-+ reg = <0x00021000 0x1000>;
-+
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ ranges;
-+
-+ interrupt-parent = <&gic>;
-+
-+ ehci: usb at 21000 {
-+ #usb-cells = <0>;
-+
-+ compatible = "generic-ehci";
-+ reg = <0x00021000 0x1000>;
-+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
-+ phys = <&usb2_phy>;
-+
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ ehci_port1: port at 1 {
-+ reg = <1>;
-+ #trigger-source-cells = <0>;
-+ };
-+
-+ ehci_port2: port at 2 {
-+ reg = <2>;
-+ #trigger-source-cells = <0>;
-+ };
-+ };
-+
-+ ohci: usb at 22000 {
-+ #usb-cells = <0>;
-+
-+ compatible = "generic-ohci";
-+ reg = <0x00022000 0x1000>;
-+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
-+
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ ohci_port1: port at 1 {
-+ reg = <1>;
-+ #trigger-source-cells = <0>;
-+ };
-+
-+ ohci_port2: port at 2 {
-+ reg = <2>;
-+ #trigger-source-cells = <0>;
-+ };
-+ };
-+ };
-+
-+ usb3: usb3 at 23000 {
-+ reg = <0x00023000 0x1000>;
-+
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ ranges;
-+
-+ interrupt-parent = <&gic>;
-+
-+ xhci: usb at 23000 {
-+ #usb-cells = <0>;
-+
-+ compatible = "generic-xhci";
-+ reg = <0x00023000 0x1000>;
-+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
-+ phys = <&usb3_phy>;
-+ phy-names = "usb";
-+
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ xhci_port1: port at 1 {
-+ reg = <1>;
-+ #trigger-source-cells = <0>;
-+ };
-+ };
-+ };
-+
-+ gmac0: ethernet at 24000 {
-+ reg = <0x24000 0x800>;
-+ };
-+
-+ gmac1: ethernet at 25000 {
-+ reg = <0x25000 0x800>;
-+ };
-+
-+ gmac2: ethernet at 26000 {
-+ reg = <0x26000 0x800>;
-+ };
-+
-+ gmac3: ethernet at 27000 {
-+ reg = <0x27000 0x800>;
-+ };
-+ };
-+
-+ pwm: pwm at 18002000 {
-+ compatible = "brcm,iproc-pwm";
-+ reg = <0x18002000 0x28>;
-+ clocks = <&osc>;
-+ #pwm-cells = <3>;
-+ status = "disabled";
-+ };
-+
-+ mdio: mdio at 18003000 {
-+ compatible = "brcm,iproc-mdio";
-+ reg = <0x18003000 0x8>;
-+ #size-cells = <0>;
-+ #address-cells = <1>;
-+ };
-+
-+ mdio-mux at 18003000 {
-+ compatible = "mdio-mux-mmioreg", "mdio-mux";
-+ mdio-parent-bus = <&mdio>;
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ reg = <0x18003000 0x4>;
-+ mux-mask = <0x200>;
-+
-+ mdio at 0 {
-+ reg = <0x0>;
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ usb3_phy: usb3-phy at 10 {
-+ compatible = "brcm,ns-ax-usb3-phy";
-+ reg = <0x10>;
-+ usb3-dmp-syscon = <&usb3_dmp>;
-+ #phy-cells = <0>;
-+ status = "disabled";
-+ };
-+ };
-+ };
-+
-+ usb3_dmp: syscon at 18105000 {
-+ reg = <0x18105000 0x1000>;
-+ };
-+
-+ uart2: serial at 18008000 {
-+ compatible = "ns16550a";
-+ reg = <0x18008000 0x20>;
-+ clocks = <&iprocslow>;
-+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-+ reg-shift = <2>;
-+ status = "disabled";
-+ };
-+
-+ i2c0: i2c at 18009000 {
-+ compatible = "brcm,iproc-i2c";
-+ reg = <0x18009000 0x50>;
-+ interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ clock-frequency = <100000>;
-+ status = "disabled";
-+ };
-+
-+ dmu-bus at 1800c000 {
-+ compatible = "simple-bus";
-+ ranges = <0 0x1800c000 0x1000>;
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ cru-bus at 100 {
-+ compatible = "brcm,ns-cru", "simple-mfd";
-+ reg = <0x100 0x1a4>;
-+ ranges;
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ lcpll0: clock-controller at 100 {
-+ #clock-cells = <1>;
-+ compatible = "brcm,nsp-lcpll0";
-+ reg = <0x100 0x14>;
-+ clocks = <&osc>;
-+ clock-output-names = "lcpll0", "pcie_phy",
-+ "sdio", "ddr_phy";
-+ };
-+
-+ genpll: clock-controller at 140 {
-+ #clock-cells = <1>;
-+ compatible = "brcm,nsp-genpll";
-+ reg = <0x140 0x24>;
-+ clocks = <&osc>;
-+ clock-output-names = "genpll", "phy",
-+ "ethernetclk",
-+ "usbclk", "iprocfast",
-+ "sata1", "sata2";
-+ };
-+
-+ usb2_phy: phy at 164 {
-+ compatible = "brcm,ns-usb2-phy";
-+ reg = <0x164 0x4>;
-+ brcm,syscon-clkset = <&cru_clkset>;
-+ clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>;
-+ clock-names = "phy-ref-clk";
-+ #phy-cells = <0>;
-+ };
-+
-+ cru_clkset: syscon at 180 {
-+ compatible = "brcm,cru-clkset", "syscon";
-+ reg = <0x180 0x4>;
-+ };
-+
-+ pinctrl: pinctrl at 1c0 {
-+ compatible = "brcm,bcm4708-pinmux";
-+ reg = <0x1c0 0x24>;
-+ reg-names = "cru_gpio_control";
-+
-+ spi-pins {
-+ groups = "spi_grp";
-+ function = "spi";
-+ };
-+
-+ pinmux_i2c: i2c-pins {
-+ groups = "i2c_grp";
-+ function = "i2c";
-+ };
-+
-+ pinmux_pwm: pwm-pins {
-+ groups = "pwm0_grp", "pwm1_grp",
-+ "pwm2_grp", "pwm3_grp";
-+ function = "pwm";
-+ };
-+
-+ pinmux_uart1: uart1-pins {
-+ groups = "uart1_grp";
-+ function = "uart1";
-+ };
-+ };
-+
-+ thermal: thermal at 2c0 {
-+ compatible = "brcm,ns-thermal";
-+ reg = <0x2c0 0x10>;
-+ #thermal-sensor-cells = <0>;
-+ };
-+ };
-+ };
-+
-+ srab: ethernet-switch at 18007000 {
-+ compatible = "brcm,bcm53011-srab", "brcm,bcm5301x-srab";
-+ reg = <0x18007000 0x1000>;
-+
-+ status = "disabled";
-+
-+ /* ports are defined in board DTS */
-+ ports {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ };
-+ };
-+
-+ rng: rng at 18004000 {
-+ compatible = "brcm,bcm5301x-rng";
-+ reg = <0x18004000 0x14>;
-+ };
-+
-+ nand_controller: nand-controller at 18028000 {
-+ compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", "brcm,brcmnand";
-+ reg = <0x18028000 0x600>, <0x1811a408 0x600>, <0x18028f00 0x20>;
-+ reg-names = "nand", "iproc-idm", "iproc-ext";
-+ interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
-+
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ brcm,nand-has-wp;
-+ };
-+
-+ spi at 18029200 {
-+ compatible = "brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi";
-+ reg = <0x18029200 0x184>,
-+ <0x18029000 0x124>,
-+ <0x1811b408 0x004>,
-+ <0x180293a0 0x01c>;
-+ reg-names = "mspi", "bspi", "intr_regs", "intr_status_reg";
-+ interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
-+ <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
-+ <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
-+ <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
-+ <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
-+ <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
-+ <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
-+ interrupt-names = "mspi_done",
-+ "mspi_halted",
-+ "spi_lr_fullness_reached",
-+ "spi_lr_session_aborted",
-+ "spi_lr_impatient",
-+ "spi_lr_session_done",
-+ "spi_lr_overread";
-+ clocks = <&iprocmed>;
-+ clock-names = "iprocmed";
-+ num-cs = <2>;
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ spi_nor: flash at 0 {
-+ compatible = "jedec,spi-nor";
-+ reg = <0>;
-+ spi-max-frequency = <20000000>;
-+ status = "disabled";
-+
-+ partitions {
-+ compatible = "brcm,bcm947xx-cfe-partitions";
-+ };
-+ };
-+ };
-+
-+ thermal-zones {
-+ cpu_thermal: cpu-thermal {
-+ polling-delay-passive = <0>;
-+ polling-delay = <1000>;
-+ coefficients = <(-556) 418000>;
-+ thermal-sensors = <&thermal>;
-+
-+ trips {
-+ cpu-crit {
-+ temperature = <125000>;
-+ hysteresis = <0>;
-+ type = "critical";
-+ };
-+ };
-+
-+ cooling-maps {
-+ };
-+ };
-+ };
-+};
---- /dev/null
-+++ b/include/dt-bindings/clock/bcm-nsp.h
-@@ -0,0 +1,51 @@
-+/*
-+ * BSD LICENSE
-+ *
-+ * Copyright(c) 2015 Broadcom Corporation. All rights reserved.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions
-+ * are met:
-+ *
-+ * * Redistributions of source code must retain the above copyright
-+ * notice, this list of conditions and the following disclaimer.
-+ * * Redistributions in binary form must reproduce the above copyright
-+ * notice, this list of conditions and the following disclaimer in
-+ * the documentation and/or other materials provided with the
-+ * distribution.
-+ * * Neither the name of Broadcom Corporation nor the names of its
-+ * contributors may be used to endorse or promote products derived
-+ * from this software without specific prior written permission.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+#ifndef _CLOCK_BCM_NSP_H
-+#define _CLOCK_BCM_NSP_H
-+
-+/* GENPLL clock channel ID */
-+#define BCM_NSP_GENPLL 0
-+#define BCM_NSP_GENPLL_PHY_CLK 1
-+#define BCM_NSP_GENPLL_ENET_SW_CLK 2
-+#define BCM_NSP_GENPLL_USB_PHY_REF_CLK 3
-+#define BCM_NSP_GENPLL_IPROCFAST_CLK 4
-+#define BCM_NSP_GENPLL_SATA1_CLK 5
-+#define BCM_NSP_GENPLL_SATA2_CLK 6
-+
-+/* LCPLL0 clock channel ID */
-+#define BCM_NSP_LCPLL0 0
-+#define BCM_NSP_LCPLL0_PCIE_PHY_REF_CLK 1
-+#define BCM_NSP_LCPLL0_SDIO_CLK 2
-+#define BCM_NSP_LCPLL0_DDR_PHY_CLK 3
-+
-+#endif /* _CLOCK_BCM_NSP_H */
diff --git a/package/boot/uboot-bcm53xx/patches/0004-arm-Add-support-for-the-Broadcom-Northstar-SoCs.patch b/package/boot/uboot-bcm53xx/patches/0004-arm-Add-support-for-the-Broadcom-Northstar-SoCs.patch
deleted file mode 100644
index 92eaa46e51..0000000000
--- a/package/boot/uboot-bcm53xx/patches/0004-arm-Add-support-for-the-Broadcom-Northstar-SoCs.patch
+++ /dev/null
@@ -1,66 +0,0 @@
-From b81ea0a64b01ae42e8b41d2a8b9a3fabffe97489 Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij at linaro.org>
-Date: Mon, 24 Apr 2023 09:38:29 +0200
-Subject: [PATCH 4/5] arm: Add support for the Broadcom Northstar SoCs
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The original Northstar is an ARM SoC series that comprise
-BCM4709x and BCM5301x and uses a dual-core Cortex A9, the
-global timer and a few other things.
-
-This series should not be confused with North Star Plus
-(NSP) which is partly supported by U-Boot already.
-
-The SoC is well supported by the Linux kernel and OpenWrt
-as it is used in many routers.
-
-Since we currently don't need any chip-specific quirks
-and can get the system up from just the device tree, a
-mach-* directory doesn't even need to be added, just
-some small Kconfig fragments.
-
-Cc: Rafał Miłecki <rafal at milecki.pl>
-Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
----
- arch/arm/Kconfig | 21 ++++++++++++++++++++-
- 1 file changed, 20 insertions(+), 1 deletion(-)
-
---- a/arch/arm/Kconfig
-+++ b/arch/arm/Kconfig
-@@ -357,7 +357,7 @@ config SYS_ARM_ARCH
-
- choice
- prompt "Select the ARM data write cache policy"
-- default SYS_ARM_CACHE_WRITETHROUGH if TARGET_BCMCYGNUS || RZA1
-+ default SYS_ARM_CACHE_WRITETHROUGH if TARGET_BCMCYGNUS || TARGET_BCMNS || RZA1
- default SYS_ARM_CACHE_WRITEBACK
-
- config SYS_ARM_CACHE_WRITEBACK
-@@ -670,6 +670,25 @@ config TARGET_BCMCYGNUS
- imply HASH_VERIFY
- imply NETDEVICES
-
-+config TARGET_BCMNS
-+ bool "Support Broadcom Northstar"
-+ select CPU_V7A
-+ select DM
-+ select DM_GPIO
-+ select DM_SERIAL
-+ select OF_CONTROL
-+ select TIMER
-+ select SYS_NS16550
-+ select ARM_GLOBAL_TIMER
-+ imply SYS_THUMB_BUILD
-+ imply MTD_RAW_NAND
-+ imply NAND_BRCMNAND
-+ imply NAND_BRCMNAND_IPROC
-+ help
-+ Support for Broadcom Northstar SoCs. NS is a dual-core 32-bit
-+ ARMv7 Cortex-A9 SoC family including BCM4708, BCM47094,
-+ BCM5301x etc.
-+
- config TARGET_BCMNS2
- bool "Support Broadcom Northstar2"
- select ARM64
diff --git a/package/boot/uboot-bcm53xx/patches/0005-board-Add-new-Broadcom-Northstar-board.patch b/package/boot/uboot-bcm53xx/patches/0005-board-Add-new-Broadcom-Northstar-board.patch
deleted file mode 100644
index 158718133d..0000000000
--- a/package/boot/uboot-bcm53xx/patches/0005-board-Add-new-Broadcom-Northstar-board.patch
+++ /dev/null
@@ -1,372 +0,0 @@
-From 652a6fa45b6c9d52dd9685fc12ad662e54a9092e Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij at linaro.org>
-Date: Mon, 24 Apr 2023 09:38:30 +0200
-Subject: [PATCH 5/5] board: Add new Broadcom Northstar board
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This adds a simple Northstar "BRCMNS" board to be used with
-the BCM4708x and BCM5301x chips.
-
-The main intention is to use this with the D-Link DIR-890L
-and DIR-885L routers for loading the kernel into RAM from
-NAND memory using the BCH-1 ECC and using the separately
-submitted SEAMA load command, so we are currently not adding
-support for things such as networking.
-
-The DTS file is a multiplatform NorthStar board, designed to
-be usable with several NorthStar designs by avoiding any
-particulars not related to the operation of U-Boot.
-
-If other board need other ECC for example, they need to
-create a separate DTS file and augment the code, but I don't
-know if any other users will turn up.
-
-Cc: Rafał Miłecki <rafal at milecki.pl>
-Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
----
- arch/arm/Kconfig | 1 +
- arch/arm/dts/Makefile | 2 ++
- arch/arm/dts/ns-board.dts | 57 ++++++++++++++++++++++++++++++
- board/broadcom/bcmns/Kconfig | 12 +++++++
- board/broadcom/bcmns/MAINTAINERS | 6 ++++
- board/broadcom/bcmns/Makefile | 2 ++
- board/broadcom/bcmns/ns.c | 60 ++++++++++++++++++++++++++++++++
- configs/bcmns_defconfig | 41 ++++++++++++++++++++++
- doc/board/broadcom/index.rst | 1 +
- doc/board/broadcom/northstar.rst | 44 +++++++++++++++++++++++
- include/configs/bcmns.h | 49 ++++++++++++++++++++++++++
- 11 files changed, 275 insertions(+)
- create mode 100644 arch/arm/dts/ns-board.dts
- create mode 100644 board/broadcom/bcmns/Kconfig
- create mode 100644 board/broadcom/bcmns/MAINTAINERS
- create mode 100644 board/broadcom/bcmns/Makefile
- create mode 100644 board/broadcom/bcmns/ns.c
- create mode 100644 configs/bcmns_defconfig
- create mode 100644 doc/board/broadcom/northstar.rst
- create mode 100644 include/configs/bcmns.h
-
---- a/arch/arm/Kconfig
-+++ b/arch/arm/Kconfig
-@@ -2286,6 +2286,7 @@ source "board/Marvell/octeontx2/Kconfig"
- source "board/armltd/vexpress/Kconfig"
- source "board/armltd/vexpress64/Kconfig"
- source "board/cortina/presidio-asic/Kconfig"
-+source "board/broadcom/bcmns/Kconfig"
- source "board/broadcom/bcmns3/Kconfig"
- source "board/cavium/thunderx/Kconfig"
- source "board/eets/pdu001/Kconfig"
---- a/arch/arm/dts/Makefile
-+++ b/arch/arm/dts/Makefile
-@@ -1185,6 +1185,8 @@ dtb-$(CONFIG_ARCH_BCM283X) += \
- bcm2837-rpi-cm3-io3.dtb \
- bcm2711-rpi-4-b.dtb
-
-+dtb-$(CONFIG_TARGET_BCMNS) += ns-board.dtb
-+
- dtb-$(CONFIG_TARGET_BCMNS3) += ns3-board.dtb
-
- dtb-$(CONFIG_ARCH_BCMSTB) += bcm7xxx.dtb
---- /dev/null
-+++ b/arch/arm/dts/ns-board.dts
-@@ -0,0 +1,57 @@
-+// SPDX-License-Identifier: GPL-2.0+
-+
-+/dts-v1/;
-+
-+#include "bcm5301x.dtsi"
-+
-+/ {
-+ /*
-+ * The Northstar does not have a proper fallback compatible, but
-+ * these basic chips will suffice.
-+ */
-+ model = "Northstar model";
-+ compatible = "brcm,bcm47094", "brcm,bcm4708";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ interrupt-parent = <&gic>;
-+
-+ memory {
-+ device_type = "memory";
-+ reg = <0x00000000 0x08000000>,
-+ <0x88000000 0x08000000>;
-+ };
-+
-+ aliases {
-+ serial0 = &uart0;
-+ };
-+
-+ chosen {
-+ stdout-path = "serial0:115200n8";
-+ };
-+
-+ nand-controller at 18028000 {
-+ nandcs: nand at 0 {
-+ compatible = "brcm,nandcs";
-+ reg = <0>;
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ /*
-+ * Same as using the bcm5301x-nand-cs0-bch1.dtsi
-+ * include from the Linux kernel.
-+ */
-+ nand-ecc-algo = "bch";
-+ nand-ecc-strength = <1>;
-+ nand-ecc-step-size = <512>;
-+
-+ partitions {
-+ compatible = "brcm,bcm947xx-cfe-partitions";
-+ };
-+ };
-+ };
-+};
-+
-+&uart0 {
-+ clock-frequency = <125000000>;
-+ status = "okay";
-+};
---- /dev/null
-+++ b/board/broadcom/bcmns/Kconfig
-@@ -0,0 +1,12 @@
-+if TARGET_BCMNS
-+
-+config SYS_BOARD
-+ default "bcmns"
-+
-+config SYS_VENDOR
-+ default "broadcom"
-+
-+config SYS_CONFIG_NAME
-+ default "bcmns"
-+
-+endif
---- /dev/null
-+++ b/board/broadcom/bcmns/MAINTAINERS
-@@ -0,0 +1,6 @@
-+BCMNS BOARD
-+M: Linus Walleij <linus.walleij at linaro.org>
-+S: Maintained
-+F: board/broadcom/bcmnsp/
-+F: configs/bcmnsp_defconfig
-+F: include/configs/bcmnsp.h
---- /dev/null
-+++ b/board/broadcom/bcmns/Makefile
-@@ -0,0 +1,2 @@
-+# SPDX-License-Identifier: GPL-2.0-or-later
-+obj-y := ns.o
---- /dev/null
-+++ b/board/broadcom/bcmns/ns.c
-@@ -0,0 +1,60 @@
-+// SPDX-License-Identifier: GPL-2.0+
-+/*
-+ * Broadcom Northstar generic board set-up code
-+ * Copyright (C) 2023 Linus Walleij <linus.walleij at linaro.org>
-+ */
-+
-+#include <common.h>
-+#include <dm.h>
-+#include <init.h>
-+#include <log.h>
-+#include <ram.h>
-+#include <serial.h>
-+#include <asm/global_data.h>
-+#include <asm/io.h>
-+#include <asm/armv7m.h>
-+
-+DECLARE_GLOBAL_DATA_PTR;
-+
-+int dram_init(void)
-+{
-+ return fdtdec_setup_mem_size_base();
-+}
-+
-+int dram_init_banksize(void)
-+{
-+ return fdtdec_setup_memory_banksize();
-+}
-+
-+int board_late_init(void)
-+{
-+ /* LEDs etc can be initialized here */
-+ return 0;
-+}
-+
-+int board_init(void)
-+{
-+ return 0;
-+}
-+
-+void reset_cpu(void)
-+{
-+}
-+
-+int print_cpuinfo(void)
-+{
-+ printf("BCMNS Northstar SoC\n");
-+ return 0;
-+}
-+
-+int misc_init_r(void)
-+{
-+ return 0;
-+}
-+
-+int ft_board_setup(void *fdt, struct bd_info *bd)
-+{
-+ printf("Northstar board setup: DTB at 0x%08lx\n", (ulong)fdt);
-+ return 0;
-+}
-+
---- /dev/null
-+++ b/configs/bcmns_defconfig
-@@ -0,0 +1,41 @@
-+CONFIG_ARM=y
-+CONFIG_TARGET_BCMNS=y
-+CONFIG_TEXT_BASE=0x00008000
-+CONFIG_SYS_MALLOC_LEN=0x2000000
-+CONFIG_SYS_MALLOC_F_LEN=0x8000
-+CONFIG_NR_DRAM_BANKS=2
-+CONFIG_DEFAULT_DEVICE_TREE="ns-board"
-+CONFIG_IDENT_STRING="Broadcom Northstar"
-+CONFIG_SYS_LOAD_ADDR=0x00008000
-+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x00100000
-+# CONFIG_BOOTSTD is not set
-+CONFIG_AUTOBOOT_KEYED=y
-+CONFIG_AUTOBOOT_PROMPT="Boot Northstar system in %d seconds\n"
-+CONFIG_BOOTDELAY=1
-+CONFIG_USE_BOOTCOMMAND=y
-+CONFIG_BOOTCOMMAND="run bootcmd_dlink_dir8xxl"
-+CONFIG_SYS_PROMPT="northstar> "
-+CONFIG_ENV_VARS_UBOOT_CONFIG=y
-+CONFIG_OF_BOARD_SETUP=y
-+CONFIG_OF_STDOUT_VIA_ALIAS=y
-+CONFIG_DISPLAY_BOARDINFO_LATE=y
-+CONFIG_HUSH_PARSER=y
-+CONFIG_SYS_MAXARGS=64
-+CONFIG_CMD_SEAMA=y
-+CONFIG_CMD_BOOTZ=y
-+CONFIG_CMD_CACHE=y
-+CONFIG_OF_EMBED=y
-+CONFIG_USE_HOSTNAME=y
-+CONFIG_HOSTNAME="NS"
-+CONFIG_CLK=y
-+CONFIG_MTD=y
-+CONFIG_DM_MTD=y
-+CONFIG_MTD_RAW_NAND=y
-+CONFIG_NAND_BRCMNAND=y
-+CONFIG_SYS_NAND_ONFI_DETECTION=y
-+CONFIG_CMD_NAND=y
-+CONFIG_DM_SERIAL=y
-+CONFIG_SYS_NS16550=y
-+# CONFIG_NET is not set
-+# CONFIG_EFI_LOADER is not set
---- a/doc/board/broadcom/index.rst
-+++ b/doc/board/broadcom/index.rst
-@@ -9,3 +9,4 @@ Broadcom
-
- bcm7xxx
- raspberrypi
-+ northstar
---- /dev/null
-+++ b/doc/board/broadcom/northstar.rst
-@@ -0,0 +1,44 @@
-+.. SPDX-License-Identifier: GPL-2.0+
-+.. Copyright (C) 2023 Linus Walleij <linus.walleij at linaro.org>
-+
-+Broadcom Northstar Boards
-+=========================
-+
-+This document describes how to use U-Boot on the Broadcom Northstar
-+boards, comprised of the Cortex A9 ARM-based BCM470x and BCM5301x SoCs. These
-+were introduced in 2012-2013 and some of them are also called StrataGX.
-+
-+Northstar is part of the iProc SoC family.
-+
-+A good overview of these boards can be found in Jon Mason's presentation
-+"Enabling New Hardware in U-Boot" where the difference between Northstar
-+and Northstar Plus and Northstar 2 (Aarch64) is addressed.
-+
-+The ROM in the Northstar SoC will typically look into NOR flash memory
-+for a boot loader, and the way this works is undocumented. It should be
-+possible to execute U-Boot as the first binary from the NOR flash but
-+this usage path is unexplored. Please add information if you know more.
-+
-+D-Link Boards
-+-------------
-+
-+When we use U-Boot with D-Link routers, the NOR flash has a boot loader
-+and web server that can re-flash the bigger NAND flash memory for object
-+code in the SEAMA format, so on these platforms U-Boot is converted into
-+a SEAMA binary and installed in the SoC using the flash tool resident in
-+the NOR flash. Details can be found in the OpenWrt project codebase.
-+
-+Configure
-+---------
-+
-+.. code-block:: console
-+
-+ $ make CROSS_COMPILE=${CROSS_COMPILE} bcmns_defconfig
-+
-+Build
-+-----
-+
-+.. code-block:: console
-+
-+ $ make CROSS_COMPILE=${CROSS_COMPILE}
-+ $ ${CROSS_COMPILE}strip u-boot
---- /dev/null
-+++ b/include/configs/bcmns.h
-@@ -0,0 +1,49 @@
-+/* SPDX-License-Identifier: GPL-2.0+ */
-+
-+#ifndef __BCM_NS_H
-+#define __BCM_NS_H
-+
-+#include <linux/sizes.h>
-+
-+/* Physical Memory Map */
-+#define V2M_BASE 0x00000000
-+#define PHYS_SDRAM_1 V2M_BASE
-+
-+#define CFG_SYS_SDRAM_BASE PHYS_SDRAM_1
-+
-+/* Called "periph_clk" in Linux, used by the global timer */
-+#define CFG_SYS_HZ_CLOCK 500000000
-+
-+/* Called "iprocslow" in Linux */
-+#define CFG_SYS_NS16550_CLK 125000000
-+
-+/* console configuration */
-+#define CONSOLE_ARGS "console_args=console=ttyS0,115200n8\0"
-+#define MAX_CPUS "max_cpus=maxcpus=2\0"
-+#define EXTRA_ARGS "extra_args=earlycon=uart8250,mmio32,0x18000300\0"
-+
-+#define BASE_ARGS "${console_args} ${extra_args} ${pcie_args}" \
-+ " ${max_cpus} ${log_level} ${reserved_mem}"
-+#define SETBOOTARGS "setbootargs=setenv bootargs " BASE_ARGS "\0"
-+
-+#define KERNEL_LOADADDR_CFG \
-+ "loadaddr=0x01000000\0" \
-+ "dtb_loadaddr=0x02000000\0"
-+
-+/*
-+ * Hardcoded for the only boards we support, if you add more
-+ * boards, add a more clever bootcmd!
-+ */
-+#define NS_BOOTCMD "bootcmd_dlink_dir8xxl=seama 0x00fe0000; go 0x01000000"
-+
-+#define ARCH_ENV_SETTINGS \
-+ CONSOLE_ARGS \
-+ MAX_CPUS \
-+ EXTRA_ARGS \
-+ KERNEL_LOADADDR_CFG \
-+ NS_BOOTCMD
-+
-+#define CFG_EXTRA_ENV_SETTINGS \
-+ ARCH_ENV_SETTINGS
-+
-+#endif /* __BCM_NS_H */
More information about the lede-commits
mailing list