[openwrt/openwrt] Revert "lantiq: xway: kernel: enable SMP support"
LEDE Commits
lede-commits at lists.infradead.org
Tue Jan 16 04:23:33 PST 2024
ansuel pushed a commit to openwrt/openwrt.git, branch openwrt-23.05:
https://git.openwrt.org/64d8c277cde0259d9f65f97830d5c18d399aea3a
commit 64d8c277cde0259d9f65f97830d5c18d399aea3a
Author: Aleksander Jan Bajkowski <olek2 at wp.pl>
AuthorDate: Thu Jan 11 23:05:39 2024 +0100
Revert "lantiq: xway: kernel: enable SMP support"
Enabling SMP on the xway target results in two issues:
* some danube chipset-based devices fail on boot,
* on devices based on the arx100 chipset, enabling smp
results in a degradation of NAT performance.
After these two issues are fixed, SMP can be re-enabled.
This reverts commit 084c20f6c54180f2dc6b3efc1c5ba9b62afbaf26.
Fixes: #13934
Fixes: #14283
Signed-off-by: Aleksander Jan Bajkowski <olek2 at wp.pl>
---
target/linux/lantiq/xway/config-5.15 | 26 --------------------------
1 file changed, 26 deletions(-)
diff --git a/target/linux/lantiq/xway/config-5.15 b/target/linux/lantiq/xway/config-5.15
index 5a6f15dafd..249af20bf6 100644
--- a/target/linux/lantiq/xway/config-5.15
+++ b/target/linux/lantiq/xway/config-5.15
@@ -4,9 +4,6 @@ CONFIG_ARCH_KEEP_MEMBLOCK=y
CONFIG_AT803X_PHY=y
CONFIG_BLK_MQ_PCI=y
CONFIG_CPU_HAS_DIEI=y
-CONFIG_CPU_MIPSR2_IRQ_EI=y
-CONFIG_CPU_MIPSR2_IRQ_VI=y
-CONFIG_CPU_RMAP=y
CONFIG_CRC16=y
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_HASH_INFO=y
@@ -25,11 +22,6 @@ CONFIG_LANTIQ_ETOP=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_MIPS_EBPF_JIT=y
-CONFIG_MIPS_MT=y
-CONFIG_MIPS_MT_FPAFF=y
-CONFIG_MIPS_MT_SMP=y
-CONFIG_MIPS_NR_CPU_NR_MAP=2
-CONFIG_MIPS_PERF_SHARED_TC_COUNTERS=y
CONFIG_MTD_NAND_CORE=y
CONFIG_MTD_NAND_ECC=y
CONFIG_MTD_NAND_ECC_SW_HAMMING=y
@@ -39,44 +31,26 @@ CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_BEB_LIMIT=20
CONFIG_MTD_UBI_BLOCK=y
CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_NET_FLOW_LIMIT=y
CONFIG_NET_SELFTESTS=y
CONFIG_NLS=y
-CONFIG_NR_CPUS=2
-CONFIG_PADATA=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_LANTIQ=y
CONFIG_PSB6970_PHY=y
CONFIG_PTP_1588_CLOCK_OPTIONAL=y
-CONFIG_QUEUED_RWLOCKS=y
-CONFIG_QUEUED_SPINLOCKS=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_RFS_ACCEL=y
-CONFIG_RPS=y
CONFIG_RTL8306_PHY=y
CONFIG_RTL8366RB_PHY=y
CONFIG_RTL8366_SMI=y
-# CONFIG_SCHED_CORE is not set
-CONFIG_SCHED_SMT=y
CONFIG_SGL_ALLOC=y
-CONFIG_SMP=y
-CONFIG_SMP_UP=y
-CONFIG_SOCK_RX_QUEUE_MAPPING=y
CONFIG_SOC_TYPE_XWAY=y
CONFIG_SOC_XWAY=y
CONFIG_SWCONFIG=y
-CONFIG_SYNC_R4K=y
-CONFIG_SYS_SUPPORTS_SCHED_SMT=y
-CONFIG_SYS_SUPPORTS_SMP=y
-CONFIG_TREE_RCU=y
-CONFIG_TREE_SRCU=y
CONFIG_UBIFS_FS=y
CONFIG_USB=y
CONFIG_USB_COMMON=y
CONFIG_USB_SUPPORT=y
-CONFIG_XPS=y
CONFIG_XXHASH=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_ZLIB_INFLATE=y
More information about the lede-commits
mailing list