[openwrt/openwrt] qualcommax: backport more changes for ipq6018 and ipq8074
LEDE Commits
lede-commits at lists.infradead.org
Mon Feb 19 06:01:20 PST 2024
robimarko pushed a commit to openwrt/openwrt.git, branch main:
https://git.openwrt.org/4108c0c1b6965b3a4e5fbaa1171310875e80f76e
commit 4108c0c1b6965b3a4e5fbaa1171310875e80f76e
Author: Chukun Pan <amadeus at jmu.edu.cn>
AuthorDate: Mon Jan 15 23:28:13 2024 +0800
qualcommax: backport more changes for ipq6018 and ipq8074
- Mark patches as upstream
- Backport more upstream changes
- Handle conflicts and refresh patches
Signed-off-by: Chukun Pan <amadeus at jmu.edu.cn>
---
...arm64-dts-qcom-ipq6018-fix-NAND-node-name.patch | 28 +
...com-ipq6018-align-TLMM-pin-configuration-.patch | 56 ++
...s-qcom-ipq8074-add-compatible-fallback-to.patch | 26 +
...s-qcom-ipq8074-add-critical-thermal-trips.patch | 24 +-
...ufreq-qcom-nvmem-add-support-for-IPQ6018.patch} | 26 +-
...ufreq-qcom-nvmem-add-support-for-IPQ8074.patch} | 23 +-
...com-ipq8074-include-the-GPLL0-as-clock-pr.patch | 6 +-
...-qcom-ipq6018-move-ARMv8-timer-out-of-SoC.patch | 52 ++
...rm64-dts-qcom-ipq6018-Sort-nodes-properly.patch | 605 +++++++++++++++++++++
...dts-qcom-ipq6018-Add-remove-some-newlines.patch | 92 ++++
...-arm64-dts-qcom-ipq6018-Use-lowercase-hex.patch | 25 +
...s-qcom-ipq6018-align-RPM-G-Link-node-with.patch | 28 +
...s-qcom-ipq6018-cp01-c1-drop-SPI-cs-select.patch | 27 +
...-qcom-add-few-more-reserved-memory-region.patch | 92 ++++
...dts-qcom-enable-the-download-mode-support.patch | 49 ++
...ts-qcom-ipq6018-correct-qrng-unit-address.patch | 29 +
...qcom-ipq6018-add-unit-address-to-soc-node.patch | 28 +
...5-arm64-dts-qcom-ipq6018-add-QFPROM-node.patch} | 8 +-
...4-dts-qcom-ipq6018-drop-incorrect-SPI-bus.patch | 37 ++
...4-dts-qcom-ipq8074-drop-incorrect-SPI-bus.patch | 29 +
...gcc-ipq6018-Use-floor-ops-for-sdcc-clocks.patch | 27 +
...qcom-gcc-ipq6018-drop-redundant-F-define.patch} | 2 +-
....6-clk-qcom-gcc-ipq6018-update-UBI32-PLL.patch} | 2 +-
...cc-ipq6018-remove-duplicate-initializers.patch} | 2 +-
...c-qcom-Add-RPM-processor-subsystem-driver.patch | 132 +++++
...rm64-dts-qcom-Add-rpm-proc-node-for-GLINK.patch | 93 ++++
...64-dts-qcom-ipq6018-include-the-GPLL0-as.patch} | 19 +-
...7-clk-qcom-gcc-ipq6018-add-QUP6-I2C-clock.patch | 57 ++
...arm64-dts-qcom-ipq6018-use-CPUFreq-NVMEM.patch} | 16 +-
...4-dts-ipq6018-Add-remaining-QUP-UART-node.patch | 81 +++
...dts-qcom-Fix-hs_phy_irq-for-QUSB2-targets.patch | 95 ++++
...inlock-qcom-Remove-IPQ6018-SOC-specific-.patch} | 12 +-
....9-arm64-dts-qcom-ipq6018-add-tsens-node.patch} | 10 +-
...arm64-dts-qcom-ipq6018-add-thermal-zones.patch} | 22 +-
...-ipq6018-add-qdss_at-clock-needed-for-wi.patch} | 4 +-
...usb-fix-serdes-init-sequence-for-IPQ6018.patch} | 0
...m64-dts-ipq8074-add-reserved-memory-nodes.patch | 22 +-
...com-ipq8074-pass-QMP-PCI-PHY-PIPE-clocks-.patch | 2 +-
...-dts-qcom-ipq8074-use-msi-parent-for-PCIe.patch | 6 +-
...dts-qcom-Enable-Q6v5-WCSS-for-ipq8074-SoC.patch | 8 +-
.../0121-arm64-dts-ipq8074-Add-WLAN-node.patch | 2 +-
...9-arm64-dts-qcom-ipq8074-add-QFPROM-fuses.patch | 2 +-
...137-arm64-dts-qcom-ipq6018-add-SDHCI-node.patch | 4 +-
...rm64-dts-qcom-ipq6018-add-LDOA2-regulator.patch | 18 +-
...0906-arm64-dts-qcom-ipq6018-add-wifi-node.patch | 2 +-
.../0907-soc-qcom-fix-smp2p-ack-on-ipq6018.patch | 2 +-
...com-ipq6018-assign-QDSS_AT-clock-to-wifi-.patch | 2 +-
...com-ipq6018-change-voltage-to-perf-levels.patch | 2 +-
48 files changed, 1810 insertions(+), 126 deletions(-)
diff --git a/target/linux/qualcommax/patches-6.1/0008-v6.2-arm64-dts-qcom-ipq6018-fix-NAND-node-name.patch b/target/linux/qualcommax/patches-6.1/0008-v6.2-arm64-dts-qcom-ipq6018-fix-NAND-node-name.patch
new file mode 100644
index 0000000000..a87ae4b8ad
--- /dev/null
+++ b/target/linux/qualcommax/patches-6.1/0008-v6.2-arm64-dts-qcom-ipq6018-fix-NAND-node-name.patch
@@ -0,0 +1,28 @@
+From 8857b0ab6a562c473c5bded0efda9390b82a84d4 Mon Sep 17 00:00:00 2001
+From: Robert Marko <robimarko at gmail.com>
+Date: Tue, 27 Sep 2022 22:12:17 +0200
+Subject: [PATCH] arm64: dts: qcom: ipq6018: fix NAND node name
+
+Per schema it should be nand-controller at 79b0000 instead of nand at 79b0000.
+Fix it to match nand-controller.yaml requirements.
+
+Signed-off-by: Robert Marko <robimarko at gmail.com>
+Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
+Reviewed-by: Neil Armstrong <neil.armstrong at linaro.org>
+Signed-off-by: Bjorn Andersson <andersson at kernel.org>
+Link: https://lore.kernel.org/r/20220927201218.1264506-1-robimarko@gmail.com
+---
+ arch/arm64/boot/dts/qcom/ipq6018.dtsi | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
++++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+@@ -348,7 +348,7 @@
+ status = "disabled";
+ };
+
+- qpic_nand: nand at 79b0000 {
++ qpic_nand: nand-controller at 79b0000 {
+ compatible = "qcom,ipq6018-nand";
+ reg = <0x0 0x079b0000 0x0 0x10000>;
+ #address-cells = <1>;
diff --git a/target/linux/qualcommax/patches-6.1/0018-v6.2-arm64-dts-qcom-ipq6018-align-TLMM-pin-configuration-.patch b/target/linux/qualcommax/patches-6.1/0018-v6.2-arm64-dts-qcom-ipq6018-align-TLMM-pin-configuration-.patch
new file mode 100644
index 0000000000..ceaf68bf7a
--- /dev/null
+++ b/target/linux/qualcommax/patches-6.1/0018-v6.2-arm64-dts-qcom-ipq6018-align-TLMM-pin-configuration-.patch
@@ -0,0 +1,56 @@
+From 20afb6751739264ea41993877de93923911dfdc3 Mon Sep 17 00:00:00 2001
+From: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
+Date: Thu, 6 Oct 2022 14:46:27 +0200
+Subject: [PATCH] arm64: dts: qcom: ipq6018: align TLMM pin configuration with
+ DT schema
+
+DT schema expects TLMM pin configuration nodes to be named with
+'-state' suffix and their optional children with '-pins' suffix.
+
+Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
+Reviewed-by: Bjorn Andersson <andersson at kernel.org>
+Reviewed-by: Konrad Dybcio <konrad.dybcio at somainline.org>
+Signed-off-by: Bjorn Andersson <andersson at kernel.org>
+Link: https://lore.kernel.org/r/20221006124659.217540-3-krzysztof.kozlowski@linaro.org
+---
+ arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts | 4 ++--
+ arch/arm64/boot/dts/qcom/ipq6018.dtsi | 4 ++--
+ 2 files changed, 4 insertions(+), 4 deletions(-)
+
+--- a/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts
++++ b/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts
+@@ -51,13 +51,13 @@
+ };
+
+ &tlmm {
+- i2c_1_pins: i2c-1-pins {
++ i2c_1_pins: i2c-1-state {
+ pins = "gpio42", "gpio43";
+ function = "blsp2_i2c";
+ drive-strength = <8>;
+ };
+
+- spi_0_pins: spi-0-pins {
++ spi_0_pins: spi-0-state {
+ pins = "gpio38", "gpio39", "gpio40", "gpio41";
+ function = "blsp0_spi";
+ drive-strength = <8>;
+--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
++++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+@@ -218,14 +218,14 @@
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+- serial_3_pins: serial3-pinmux {
++ serial_3_pins: serial3-state {
+ pins = "gpio44", "gpio45";
+ function = "blsp2_uart";
+ drive-strength = <8>;
+ bias-pull-down;
+ };
+
+- qpic_pins: qpic-pins {
++ qpic_pins: qpic-state {
+ pins = "gpio1", "gpio3", "gpio4",
+ "gpio5", "gpio6", "gpio7",
+ "gpio8", "gpio10", "gpio11",
diff --git a/target/linux/qualcommax/patches-6.1/0022-v6.4-arm64-dts-qcom-ipq8074-add-compatible-fallback-to.patch b/target/linux/qualcommax/patches-6.1/0022-v6.4-arm64-dts-qcom-ipq8074-add-compatible-fallback-to.patch
new file mode 100644
index 0000000000..f85be793cd
--- /dev/null
+++ b/target/linux/qualcommax/patches-6.1/0022-v6.4-arm64-dts-qcom-ipq8074-add-compatible-fallback-to.patch
@@ -0,0 +1,26 @@
+From d93bd4630ce163f3761aedc0b342b072bee6db6b Mon Sep 17 00:00:00 2001
+From: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
+Date: Wed, 22 Mar 2023 18:41:40 +0100
+Subject: [PATCH] arm64: dts: qcom: ipq8074: add compatible fallback to mailbox
+
+IPQ8074 mailbox is compatible with IPQ6018.
+
+Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
+Signed-off-by: Bjorn Andersson <andersson at kernel.org>
+Link: https://lore.kernel.org/r/20230322174148.810938-4-krzysztof.kozlowski@linaro.org
+---
+ arch/arm64/boot/dts/qcom/ipq8074.dtsi | 3 ++-
+ 1 file changed, 2 insertions(+), 1 deletion(-)
+
+--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+@@ -682,7 +682,8 @@
+ };
+
+ apcs_glb: mailbox at b111000 {
+- compatible = "qcom,ipq8074-apcs-apps-global";
++ compatible = "qcom,ipq8074-apcs-apps-global",
++ "qcom,ipq6018-apcs-apps-global";
+ reg = <0x0b111000 0x1000>;
+ clocks = <&a53pll>, <&xo>;
+ clock-names = "pll", "xo";
diff --git a/target/linux/qualcommax/patches-6.1/0023-v6.5-arm64-dts-qcom-ipq8074-add-critical-thermal-trips.patch b/target/linux/qualcommax/patches-6.1/0023-v6.5-arm64-dts-qcom-ipq8074-add-critical-thermal-trips.patch
index 98e0a08a27..737bb06752 100644
--- a/target/linux/qualcommax/patches-6.1/0023-v6.5-arm64-dts-qcom-ipq8074-add-critical-thermal-trips.patch
+++ b/target/linux/qualcommax/patches-6.1/0023-v6.5-arm64-dts-qcom-ipq8074-add-critical-thermal-trips.patch
@@ -17,7 +17,7 @@ Link: https://lore.kernel.org/r/20230607184448.2512179-1-robimarko@gmail.com
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-@@ -898,6 +898,14 @@
+@@ -899,6 +899,14 @@
polling-delay = <1000>;
thermal-sensors = <&tsens 4>;
@@ -32,7 +32,7 @@ Link: https://lore.kernel.org/r/20230607184448.2512179-1-robimarko@gmail.com
};
nss0-thermal {
-@@ -905,6 +913,14 @@
+@@ -906,6 +914,14 @@
polling-delay = <1000>;
thermal-sensors = <&tsens 5>;
@@ -47,7 +47,7 @@ Link: https://lore.kernel.org/r/20230607184448.2512179-1-robimarko@gmail.com
};
nss1-thermal {
-@@ -912,6 +928,14 @@
+@@ -913,6 +929,14 @@
polling-delay = <1000>;
thermal-sensors = <&tsens 6>;
@@ -62,7 +62,7 @@ Link: https://lore.kernel.org/r/20230607184448.2512179-1-robimarko@gmail.com
};
wcss-phya0-thermal {
-@@ -919,6 +943,14 @@
+@@ -920,6 +944,14 @@
polling-delay = <1000>;
thermal-sensors = <&tsens 7>;
@@ -77,7 +77,7 @@ Link: https://lore.kernel.org/r/20230607184448.2512179-1-robimarko@gmail.com
};
wcss-phya1-thermal {
-@@ -926,6 +958,14 @@
+@@ -927,6 +959,14 @@
polling-delay = <1000>;
thermal-sensors = <&tsens 8>;
@@ -92,7 +92,7 @@ Link: https://lore.kernel.org/r/20230607184448.2512179-1-robimarko@gmail.com
};
cpu0_thermal: cpu0-thermal {
-@@ -933,6 +973,14 @@
+@@ -934,6 +974,14 @@
polling-delay = <1000>;
thermal-sensors = <&tsens 9>;
@@ -107,7 +107,7 @@ Link: https://lore.kernel.org/r/20230607184448.2512179-1-robimarko@gmail.com
};
cpu1_thermal: cpu1-thermal {
-@@ -940,6 +988,14 @@
+@@ -941,6 +989,14 @@
polling-delay = <1000>;
thermal-sensors = <&tsens 10>;
@@ -122,7 +122,7 @@ Link: https://lore.kernel.org/r/20230607184448.2512179-1-robimarko@gmail.com
};
cpu2_thermal: cpu2-thermal {
-@@ -947,6 +1003,14 @@
+@@ -948,6 +1004,14 @@
polling-delay = <1000>;
thermal-sensors = <&tsens 11>;
@@ -137,7 +137,7 @@ Link: https://lore.kernel.org/r/20230607184448.2512179-1-robimarko@gmail.com
};
cpu3_thermal: cpu3-thermal {
-@@ -954,6 +1018,14 @@
+@@ -955,6 +1019,14 @@
polling-delay = <1000>;
thermal-sensors = <&tsens 12>;
@@ -152,7 +152,7 @@ Link: https://lore.kernel.org/r/20230607184448.2512179-1-robimarko@gmail.com
};
cluster_thermal: cluster-thermal {
-@@ -961,6 +1033,14 @@
+@@ -962,6 +1034,14 @@
polling-delay = <1000>;
thermal-sensors = <&tsens 13>;
@@ -167,7 +167,7 @@ Link: https://lore.kernel.org/r/20230607184448.2512179-1-robimarko@gmail.com
};
wcss-phyb0-thermal {
-@@ -968,6 +1048,14 @@
+@@ -969,6 +1049,14 @@
polling-delay = <1000>;
thermal-sensors = <&tsens 14>;
@@ -182,7 +182,7 @@ Link: https://lore.kernel.org/r/20230607184448.2512179-1-robimarko@gmail.com
};
wcss-phyb1-thermal {
-@@ -975,6 +1063,14 @@
+@@ -976,6 +1064,14 @@
polling-delay = <1000>;
thermal-sensors = <&tsens 15>;
diff --git a/target/linux/qualcommax/patches-6.1/0038-v6.7-cpufreq-qcom-nvmem-add-support-for-IPQ6018.patch b/target/linux/qualcommax/patches-6.1/0025-v6.7-cpufreq-qcom-nvmem-add-support-for-IPQ6018.patch
similarity index 86%
rename from target/linux/qualcommax/patches-6.1/0038-v6.7-cpufreq-qcom-nvmem-add-support-for-IPQ6018.patch
rename to target/linux/qualcommax/patches-6.1/0025-v6.7-cpufreq-qcom-nvmem-add-support-for-IPQ6018.patch
index ffd9cf030a..63e2f22db7 100644
--- a/target/linux/qualcommax/patches-6.1/0038-v6.7-cpufreq-qcom-nvmem-add-support-for-IPQ6018.patch
+++ b/target/linux/qualcommax/patches-6.1/0025-v6.7-cpufreq-qcom-nvmem-add-support-for-IPQ6018.patch
@@ -20,7 +20,7 @@ Signed-off-by: Robert Marko <robimarko at gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar at linaro.org>
---
drivers/cpufreq/cpufreq-dt-platdev.c | 1 +
- drivers/cpufreq/qcom-cpufreq-nvmem.c | 58 ++++++++++++++++++++++++++++++++++++
+ drivers/cpufreq/qcom-cpufreq-nvmem.c | 58 ++++++++++++++++++++++++++++
2 files changed, 59 insertions(+)
--- a/drivers/cpufreq/cpufreq-dt-platdev.c
@@ -31,20 +31,20 @@ Signed-off-by: Viresh Kumar <viresh.kumar at linaro.org>
+ { .compatible = "qcom,ipq6018", },
{ .compatible = "qcom,ipq8064", },
- { .compatible = "qcom,ipq8074", },
{ .compatible = "qcom,apq8064", },
+ { .compatible = "qcom,msm8974", },
--- a/drivers/cpufreq/qcom-cpufreq-nvmem.c
+++ b/drivers/cpufreq/qcom-cpufreq-nvmem.c
-@@ -36,6 +36,8 @@ enum ipq8074_versions {
- IPQ8074_ACORN_VERSION,
- };
+@@ -31,6 +31,8 @@
+
+ #include <dt-bindings/arm/qcom,ids.h>
+#define IPQ6000_VERSION BIT(2)
+
struct qcom_cpufreq_drv;
struct qcom_cpufreq_match_data {
-@@ -209,6 +211,57 @@ len_error:
+@@ -204,6 +206,57 @@ len_error:
return ret;
}
@@ -99,11 +99,11 @@ Signed-off-by: Viresh Kumar <viresh.kumar at linaro.org>
+ return 0;
+}
+
- static int qcom_cpufreq_ipq8074_name_version(struct device *cpu_dev,
- struct nvmem_cell *speedbin_nvmem,
- char **pvs_name,
-@@ -265,6 +318,10 @@ static const struct qcom_cpufreq_match_d
- .get_version = qcom_cpufreq_ipq8074_name_version,
+ static const struct qcom_cpufreq_match_data match_data_kryo = {
+ .get_version = qcom_cpufreq_kryo_name_version,
+ };
+@@ -218,6 +271,10 @@ static const struct qcom_cpufreq_match_d
+ .genpd_names = qcs404_genpd_names,
};
+static const struct qcom_cpufreq_match_data match_data_ipq6018 = {
@@ -113,11 +113,11 @@ Signed-off-by: Viresh Kumar <viresh.kumar at linaro.org>
static int qcom_cpufreq_probe(struct platform_device *pdev)
{
struct qcom_cpufreq_drv *drv;
-@@ -409,6 +466,7 @@ static const struct of_device_id qcom_cp
+@@ -362,6 +419,7 @@ static const struct of_device_id qcom_cp
{ .compatible = "qcom,apq8096", .data = &match_data_kryo },
{ .compatible = "qcom,msm8996", .data = &match_data_kryo },
{ .compatible = "qcom,qcs404", .data = &match_data_qcs404 },
+ { .compatible = "qcom,ipq6018", .data = &match_data_ipq6018 },
{ .compatible = "qcom,ipq8064", .data = &match_data_krait },
- { .compatible = "qcom,ipq8074", .data = &match_data_ipq8074 },
{ .compatible = "qcom,apq8064", .data = &match_data_krait },
+ { .compatible = "qcom,msm8974", .data = &match_data_krait },
diff --git a/target/linux/qualcommax/patches-6.1/0025-v6.7-cpufreq-qcom-nvmem-add-support-for-IPQ8074.patch b/target/linux/qualcommax/patches-6.1/0026-v6.7-cpufreq-qcom-nvmem-add-support-for-IPQ8074.patch
similarity index 84%
rename from target/linux/qualcommax/patches-6.1/0025-v6.7-cpufreq-qcom-nvmem-add-support-for-IPQ8074.patch
rename to target/linux/qualcommax/patches-6.1/0026-v6.7-cpufreq-qcom-nvmem-add-support-for-IPQ8074.patch
index 61cc2a459b..cbd7b770f4 100644
--- a/target/linux/qualcommax/patches-6.1/0025-v6.7-cpufreq-qcom-nvmem-add-support-for-IPQ8074.patch
+++ b/target/linux/qualcommax/patches-6.1/0026-v6.7-cpufreq-qcom-nvmem-add-support-for-IPQ8074.patch
@@ -1,4 +1,4 @@
-From df75a00c60c6e58bc36e4c63e9d7f1910412b132 Mon Sep 17 00:00:00 2001
+From 0b9cd949136f1b63f7aa9424b6e583a1ab261e36 Mon Sep 17 00:00:00 2001
From: Robert Marko <robimarko at gmail.com>
Date: Fri, 13 Oct 2023 19:20:02 +0200
Subject: [PATCH] cpufreq: qcom-nvmem: add support for IPQ8074
@@ -16,6 +16,7 @@ will get created by NVMEM CPUFreq driver.
Signed-off-by: Robert Marko <robimarko at gmail.com>
Acked-by: Konrad Dybcio <konrad.dybcio at linaro.org>
+[ Viresh: Fixed rebase conflict. ]
Signed-off-by: Viresh Kumar <viresh.kumar at linaro.org>
---
drivers/cpufreq/cpufreq-dt-platdev.c | 1 +
@@ -24,9 +25,9 @@ Signed-off-by: Viresh Kumar <viresh.kumar at linaro.org>
--- a/drivers/cpufreq/cpufreq-dt-platdev.c
+++ b/drivers/cpufreq/cpufreq-dt-platdev.c
-@@ -164,6 +164,7 @@ static const struct of_device_id blockli
- { .compatible = "ti,omap3", },
+@@ -165,6 +165,7 @@ static const struct of_device_id blockli
+ { .compatible = "qcom,ipq6018", },
{ .compatible = "qcom,ipq8064", },
+ { .compatible = "qcom,ipq8074", },
{ .compatible = "qcom,apq8064", },
@@ -34,9 +35,9 @@ Signed-off-by: Viresh Kumar <viresh.kumar at linaro.org>
{ .compatible = "qcom,msm8960", },
--- a/drivers/cpufreq/qcom-cpufreq-nvmem.c
+++ b/drivers/cpufreq/qcom-cpufreq-nvmem.c
-@@ -31,6 +31,11 @@
+@@ -33,6 +33,11 @@
- #include <dt-bindings/arm/qcom,ids.h>
+ #define IPQ6000_VERSION BIT(2)
+enum ipq8074_versions {
+ IPQ8074_HAWKEYE_VERSION = 0,
@@ -46,8 +47,8 @@ Signed-off-by: Viresh Kumar <viresh.kumar at linaro.org>
struct qcom_cpufreq_drv;
struct qcom_cpufreq_match_data {
-@@ -204,6 +209,44 @@ len_error:
- return ret;
+@@ -257,6 +262,44 @@ static int qcom_cpufreq_ipq6018_name_ver
+ return 0;
}
+static int qcom_cpufreq_ipq8074_name_version(struct device *cpu_dev,
@@ -91,8 +92,8 @@ Signed-off-by: Viresh Kumar <viresh.kumar at linaro.org>
static const struct qcom_cpufreq_match_data match_data_kryo = {
.get_version = qcom_cpufreq_kryo_name_version,
};
-@@ -218,6 +261,10 @@ static const struct qcom_cpufreq_match_d
- .genpd_names = qcs404_genpd_names,
+@@ -275,6 +318,10 @@ static const struct qcom_cpufreq_match_d
+ .get_version = qcom_cpufreq_ipq6018_name_version,
};
+static const struct qcom_cpufreq_match_data match_data_ipq8074 = {
@@ -102,9 +103,9 @@ Signed-off-by: Viresh Kumar <viresh.kumar at linaro.org>
static int qcom_cpufreq_probe(struct platform_device *pdev)
{
struct qcom_cpufreq_drv *drv;
-@@ -363,6 +410,7 @@ static const struct of_device_id qcom_cp
- { .compatible = "qcom,msm8996", .data = &match_data_kryo },
+@@ -421,6 +468,7 @@ static const struct of_device_id qcom_cp
{ .compatible = "qcom,qcs404", .data = &match_data_qcs404 },
+ { .compatible = "qcom,ipq6018", .data = &match_data_ipq6018 },
{ .compatible = "qcom,ipq8064", .data = &match_data_krait },
+ { .compatible = "qcom,ipq8074", .data = &match_data_ipq8074 },
{ .compatible = "qcom,apq8064", .data = &match_data_krait },
diff --git a/target/linux/qualcommax/patches-6.1/0028-v6.7-arm64-dts-qcom-ipq8074-include-the-GPLL0-as-clock-pr.patch b/target/linux/qualcommax/patches-6.1/0028-v6.7-arm64-dts-qcom-ipq8074-include-the-GPLL0-as-clock-pr.patch
index dee770e4cd..fb7011de95 100644
--- a/target/linux/qualcommax/patches-6.1/0028-v6.7-arm64-dts-qcom-ipq8074-include-the-GPLL0-as-clock-pr.patch
+++ b/target/linux/qualcommax/patches-6.1/0028-v6.7-arm64-dts-qcom-ipq8074-include-the-GPLL0-as-clock-pr.patch
@@ -19,9 +19,9 @@ Reviewed-by: Konrad Dybcio <konrad.dybcio at linaro.org>
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-@@ -684,8 +684,8 @@
- apcs_glb: mailbox at b111000 {
- compatible = "qcom,ipq8074-apcs-apps-global";
+@@ -685,8 +685,8 @@
+ compatible = "qcom,ipq8074-apcs-apps-global",
+ "qcom,ipq6018-apcs-apps-global";
reg = <0x0b111000 0x1000>;
- clocks = <&a53pll>, <&xo>;
- clock-names = "pll", "xo";
diff --git a/target/linux/qualcommax/patches-6.1/0033-v6.2-arm64-dts-qcom-ipq6018-move-ARMv8-timer-out-of-SoC.patch b/target/linux/qualcommax/patches-6.1/0033-v6.2-arm64-dts-qcom-ipq6018-move-ARMv8-timer-out-of-SoC.patch
new file mode 100644
index 0000000000..c3e94a2ae0
--- /dev/null
+++ b/target/linux/qualcommax/patches-6.1/0033-v6.2-arm64-dts-qcom-ipq6018-move-ARMv8-timer-out-of-SoC.patch
@@ -0,0 +1,52 @@
+From feeef118fda562cf9081edef8ad464d89db070f4 Mon Sep 17 00:00:00 2001
+From: Robert Marko <robimarko at gmail.com>
+Date: Tue, 27 Sep 2022 22:12:18 +0200
+Subject: [PATCH] arm64: dts: qcom: ipq6018: move ARMv8 timer out of SoC node
+
+The ARM timer is usually considered not part of SoC node, just like
+other ARM designed blocks (PMU, PSCI). This fixes dtbs_check warning:
+
+arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dtb: soc: timer: {'compatible': ['arm,armv8-timer'], 'interrupts': [[1, 2, 3848], [1, 3, 3848], [1, 4, 3848], [1, 1, 3848]]} should not be valid under {'type': 'object'}
+ From schema: dtschema/schemas/simple-bus.yaml
+
+Signed-off-by: Robert Marko <robimarko at gmail.com>
+Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
+Reviewed-by: Neil Armstrong <neil.armstrong at linaro.org>
+Signed-off-by: Bjorn Andersson <andersson at kernel.org>
+Link: https://lore.kernel.org/r/20220927201218.1264506-2-robimarko@gmail.com
+---
+ arch/arm64/boot/dts/qcom/ipq6018.dtsi | 16 ++++++++--------
+ 1 file changed, 8 insertions(+), 8 deletions(-)
+
+--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
++++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+@@ -510,14 +510,6 @@
+ clock-names = "xo";
+ };
+
+- timer {
+- compatible = "arm,armv8-timer";
+- interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+- <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+- <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+- <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+- };
+-
+ timer at b120000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+@@ -769,6 +761,14 @@
+ };
+ };
+
++ timer {
++ compatible = "arm,armv8-timer";
++ interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
++ <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
++ <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
++ <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
++ };
++
+ wcss: wcss-smp2p {
+ compatible = "qcom,smp2p";
+ qcom,smem = <435>, <428>;
diff --git a/target/linux/qualcommax/patches-6.1/0034-v6.3-arm64-dts-qcom-ipq6018-Sort-nodes-properly.patch b/target/linux/qualcommax/patches-6.1/0034-v6.3-arm64-dts-qcom-ipq6018-Sort-nodes-properly.patch
new file mode 100644
index 0000000000..ad32e64fe1
--- /dev/null
+++ b/target/linux/qualcommax/patches-6.1/0034-v6.3-arm64-dts-qcom-ipq6018-Sort-nodes-properly.patch
@@ -0,0 +1,605 @@
+From 2c6e322a41c5e1ca45be50b9d5fbcda62dc23a0d Mon Sep 17 00:00:00 2001
+From: Konrad Dybcio <konrad.dybcio at linaro.org>
+Date: Mon, 2 Jan 2023 10:46:28 +0100
+Subject: [PATCH] arm64: dts: qcom: ipq6018: Sort nodes properly
+
+Order nodes by unit address if one exists and alphabetically otherwise.
+
+Signed-off-by: Konrad Dybcio <konrad.dybcio at linaro.org>
+Signed-off-by: Bjorn Andersson <andersson at kernel.org>
+Link: https://lore.kernel.org/r/20230102094642.74254-4-konrad.dybcio@linaro.org
+---
+ arch/arm64/boot/dts/qcom/ipq6018.dtsi | 562 +++++++++++++-------------
+ 1 file changed, 281 insertions(+), 281 deletions(-)
+
+--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
++++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+@@ -87,6 +87,12 @@
+ };
+ };
+
++ firmware {
++ scm {
++ compatible = "qcom,scm-ipq6018", "qcom,scm";
++ };
++ };
++
+ cpu_opp_table: opp-table-cpu {
+ compatible = "operating-points-v2";
+ opp-shared;
+@@ -123,12 +129,6 @@
+ };
+ };
+
+- firmware {
+- scm {
+- compatible = "qcom,scm-ipq6018", "qcom,scm";
+- };
+- };
+-
+ pmuv8: pmu {
+ compatible = "arm,cortex-a53-pmu";
+ interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) |
+@@ -166,6 +166,28 @@
+ };
+ };
+
++ rpm-glink {
++ compatible = "qcom,glink-rpm";
++ interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
++ qcom,rpm-msg-ram = <&rpm_msg_ram>;
++ mboxes = <&apcs_glb 0>;
++
++ rpm_requests: glink-channel {
++ compatible = "qcom,rpm-ipq6018";
++ qcom,glink-channels = "rpm_requests";
++
++ regulators {
++ compatible = "qcom,rpm-mp5496-regulators";
++
++ ipq6018_s2: s2 {
++ regulator-min-microvolt = <725000>;
++ regulator-max-microvolt = <1062500>;
++ regulator-always-on;
++ };
++ };
++ };
++ };
++
+ smem {
+ compatible = "qcom,smem";
+ memory-region = <&smem_region>;
+@@ -179,6 +201,102 @@
+ dma-ranges;
+ compatible = "simple-bus";
+
++ qusb_phy_1: qusb at 59000 {
++ compatible = "qcom,ipq6018-qusb2-phy";
++ reg = <0x0 0x00059000 0x0 0x180>;
++ #phy-cells = <0>;
++
++ clocks = <&gcc GCC_USB1_PHY_CFG_AHB_CLK>,
++ <&xo>;
++ clock-names = "cfg_ahb", "ref";
++
++ resets = <&gcc GCC_QUSB2_1_PHY_BCR>;
++ status = "disabled";
++ };
++
++ ssphy_0: ssphy at 78000 {
++ compatible = "qcom,ipq6018-qmp-usb3-phy";
++ reg = <0x0 0x00078000 0x0 0x1c4>;
++ #address-cells = <2>;
++ #size-cells = <2>;
++ ranges;
++
++ clocks = <&gcc GCC_USB0_AUX_CLK>,
++ <&gcc GCC_USB0_PHY_CFG_AHB_CLK>, <&xo>;
++ clock-names = "aux", "cfg_ahb", "ref";
++
++ resets = <&gcc GCC_USB0_PHY_BCR>,
++ <&gcc GCC_USB3PHY_0_PHY_BCR>;
++ reset-names = "phy","common";
++ status = "disabled";
++
++ usb0_ssphy: phy at 78200 {
++ reg = <0x0 0x00078200 0x0 0x130>, /* Tx */
++ <0x0 0x00078400 0x0 0x200>, /* Rx */
++ <0x0 0x00078800 0x0 0x1f8>, /* PCS */
++ <0x0 0x00078600 0x0 0x044>; /* PCS misc */
++ #phy-cells = <0>;
++ #clock-cells = <0>;
++ clocks = <&gcc GCC_USB0_PIPE_CLK>;
++ clock-names = "pipe0";
++ clock-output-names = "gcc_usb0_pipe_clk_src";
++ };
++ };
++
++ qusb_phy_0: qusb at 79000 {
++ compatible = "qcom,ipq6018-qusb2-phy";
++ reg = <0x0 0x00079000 0x0 0x180>;
++ #phy-cells = <0>;
++
++ clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
++ <&xo>;
++ clock-names = "cfg_ahb", "ref";
++
++ resets = <&gcc GCC_QUSB2_0_PHY_BCR>;
++ status = "disabled";
++ };
++
++ pcie_phy: phy at 84000 {
++ compatible = "qcom,ipq6018-qmp-pcie-phy";
++ reg = <0x0 0x00084000 0x0 0x1bc>; /* Serdes PLL */
++ status = "disabled";
++ #address-cells = <2>;
++ #size-cells = <2>;
++ ranges;
++
++ clocks = <&gcc GCC_PCIE0_AUX_CLK>,
++ <&gcc GCC_PCIE0_AHB_CLK>;
++ clock-names = "aux", "cfg_ahb";
++
++ resets = <&gcc GCC_PCIE0_PHY_BCR>,
++ <&gcc GCC_PCIE0PHY_PHY_BCR>;
++ reset-names = "phy",
++ "common";
++
++ pcie_phy0: phy at 84200 {
++ reg = <0x0 0x00084200 0x0 0x16c>, /* Serdes Tx */
++ <0x0 0x00084400 0x0 0x200>, /* Serdes Rx */
++ <0x0 0x00084800 0x0 0x1f0>, /* PCS: Lane0, COM, PCIE */
++ <0x0 0x00084c00 0x0 0xf4>; /* pcs_misc */
++ #phy-cells = <0>;
++
++ clocks = <&gcc GCC_PCIE0_PIPE_CLK>;
++ clock-names = "pipe0";
++ clock-output-names = "gcc_pcie0_pipe_clk_src";
++ #clock-cells = <0>;
++ };
++ };
++
++ mdio: mdio at 90000 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ compatible = "qcom,ipq6018-mdio", "qcom,ipq4019-mdio";
++ reg = <0x0 0x00090000 0x0 0x64>;
++ clocks = <&gcc GCC_MDIO_AHB_CLK>;
++ clock-names = "gcc_mdio_ahb_clk";
++ status = "disabled";
++ };
++
+ prng: qrng at e1000 {
+ compatible = "qcom,prng-ee";
+ reg = <0x0 0x000e3000 0x0 0x1000>;
+@@ -257,6 +375,41 @@
+ reg = <0x0 0x01937000 0x0 0x21000>;
+ };
+
++ usb2: usb at 70f8800 {
++ compatible = "qcom,ipq6018-dwc3", "qcom,dwc3";
++ reg = <0x0 0x070F8800 0x0 0x400>;
++ #address-cells = <2>;
++ #size-cells = <2>;
++ ranges;
++ clocks = <&gcc GCC_USB1_MASTER_CLK>,
++ <&gcc GCC_USB1_SLEEP_CLK>,
++ <&gcc GCC_USB1_MOCK_UTMI_CLK>;
++ clock-names = "core",
++ "sleep",
++ "mock_utmi";
++
++ assigned-clocks = <&gcc GCC_USB1_MASTER_CLK>,
++ <&gcc GCC_USB1_MOCK_UTMI_CLK>;
++ assigned-clock-rates = <133330000>,
++ <24000000>;
++ resets = <&gcc GCC_USB1_BCR>;
++ status = "disabled";
++
++ dwc_1: usb at 7000000 {
++ compatible = "snps,dwc3";
++ reg = <0x0 0x07000000 0x0 0xcd00>;
++ interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
++ phys = <&qusb_phy_1>;
++ phy-names = "usb2-phy";
++ tx-fifo-resize;
++ snps,is-utmi-l1-suspend;
++ snps,hird-threshold = /bits/ 8 <0x0>;
++ snps,dis_u2_susphy_quirk;
++ snps,dis_u3_susphy_quirk;
++ dr_mode = "host";
++ };
++ };
++
+ blsp_dma: dma-controller at 7884000 {
+ compatible = "qcom,bam-v1.7.0";
+ reg = <0x0 0x07884000 0x0 0x2b000>;
+@@ -366,6 +519,49 @@
+ status = "disabled";
+ };
+
++ usb3: usb at 8af8800 {
++ compatible = "qcom,ipq6018-dwc3", "qcom,dwc3";
++ reg = <0x0 0x08af8800 0x0 0x400>;
++ #address-cells = <2>;
++ #size-cells = <2>;
++ ranges;
++
++ clocks = <&gcc GCC_SYS_NOC_USB0_AXI_CLK>,
++ <&gcc GCC_USB0_MASTER_CLK>,
++ <&gcc GCC_USB0_SLEEP_CLK>,
++ <&gcc GCC_USB0_MOCK_UTMI_CLK>;
++ clock-names = "cfg_noc",
++ "core",
++ "sleep",
++ "mock_utmi";
++
++ assigned-clocks = <&gcc GCC_SYS_NOC_USB0_AXI_CLK>,
++ <&gcc GCC_USB0_MASTER_CLK>,
++ <&gcc GCC_USB0_MOCK_UTMI_CLK>;
++ assigned-clock-rates = <133330000>,
++ <133330000>,
++ <24000000>;
++
++ resets = <&gcc GCC_USB0_BCR>;
++ status = "disabled";
++
++ dwc_0: usb at 8a00000 {
++ compatible = "snps,dwc3";
++ reg = <0x0 0x08a00000 0x0 0xcd00>;
++ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
++ phys = <&qusb_phy_0>, <&usb0_ssphy>;
++ phy-names = "usb2-phy", "usb3-phy";
++ clocks = <&xo>;
++ clock-names = "ref";
++ tx-fifo-resize;
++ snps,is-utmi-l1-suspend;
++ snps,hird-threshold = /bits/ 8 <0x0>;
++ snps,dis_u2_susphy_quirk;
++ snps,dis_u3_susphy_quirk;
++ dr_mode = "host";
++ };
++ };
++
+ intc: interrupt-controller at b000000 {
+ compatible = "qcom,msm-qgic2";
+ #address-cells = <2>;
+@@ -386,105 +582,6 @@
+ };
+ };
+
+- pcie_phy: phy at 84000 {
+- compatible = "qcom,ipq6018-qmp-pcie-phy";
+- reg = <0x0 0x00084000 0x0 0x1bc>; /* Serdes PLL */
+- status = "disabled";
+- #address-cells = <2>;
+- #size-cells = <2>;
+- ranges;
+-
+- clocks = <&gcc GCC_PCIE0_AUX_CLK>,
+- <&gcc GCC_PCIE0_AHB_CLK>;
+- clock-names = "aux", "cfg_ahb";
+-
+- resets = <&gcc GCC_PCIE0_PHY_BCR>,
+- <&gcc GCC_PCIE0PHY_PHY_BCR>;
+- reset-names = "phy",
+- "common";
+-
+- pcie_phy0: phy at 84200 {
+- reg = <0x0 0x00084200 0x0 0x16c>, /* Serdes Tx */
+- <0x0 0x00084400 0x0 0x200>, /* Serdes Rx */
+- <0x0 0x00084800 0x0 0x1f0>, /* PCS: Lane0, COM, PCIE */
+- <0x0 0x00084c00 0x0 0xf4>; /* pcs_misc */
+- #phy-cells = <0>;
+-
+- clocks = <&gcc GCC_PCIE0_PIPE_CLK>;
+- clock-names = "pipe0";
+- clock-output-names = "gcc_pcie0_pipe_clk_src";
+- #clock-cells = <0>;
+- };
+- };
+-
+- pcie0: pci at 20000000 {
+- compatible = "qcom,pcie-ipq6018";
+- reg = <0x0 0x20000000 0x0 0xf1d>,
+- <0x0 0x20000f20 0x0 0xa8>,
+- <0x0 0x20001000 0x0 0x1000>,
+- <0x0 0x80000 0x0 0x4000>,
+- <0x0 0x20100000 0x0 0x1000>;
+- reg-names = "dbi", "elbi", "atu", "parf", "config";
+-
+- device_type = "pci";
+- linux,pci-domain = <0>;
+- bus-range = <0x00 0xff>;
+- num-lanes = <1>;
+- max-link-speed = <3>;
+- #address-cells = <3>;
+- #size-cells = <2>;
+-
+- phys = <&pcie_phy0>;
+- phy-names = "pciephy";
+-
+- ranges = <0x81000000 0x0 0x00000000 0x0 0x20200000 0x0 0x10000>,
+- <0x82000000 0x0 0x20220000 0x0 0x20220000 0x0 0xfde0000>;
+-
+- interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+- interrupt-names = "msi";
+-
+- #interrupt-cells = <1>;
+- interrupt-map-mask = <0 0 0 0x7>;
+- interrupt-map = <0 0 0 1 &intc 0 75
+- IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+- <0 0 0 2 &intc 0 78
+- IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+- <0 0 0 3 &intc 0 79
+- IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+- <0 0 0 4 &intc 0 83
+- IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+-
+- clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>,
+- <&gcc GCC_PCIE0_AXI_M_CLK>,
+- <&gcc GCC_PCIE0_AXI_S_CLK>,
+- <&gcc GCC_PCIE0_AXI_S_BRIDGE_CLK>,
+- <&gcc PCIE0_RCHNG_CLK>;
+- clock-names = "iface",
+- "axi_m",
+- "axi_s",
+- "axi_bridge",
+- "rchng";
+-
+- resets = <&gcc GCC_PCIE0_PIPE_ARES>,
+- <&gcc GCC_PCIE0_SLEEP_ARES>,
+- <&gcc GCC_PCIE0_CORE_STICKY_ARES>,
+- <&gcc GCC_PCIE0_AXI_MASTER_ARES>,
+- <&gcc GCC_PCIE0_AXI_SLAVE_ARES>,
+- <&gcc GCC_PCIE0_AHB_ARES>,
+- <&gcc GCC_PCIE0_AXI_MASTER_STICKY_ARES>,
+- <&gcc GCC_PCIE0_AXI_SLAVE_STICKY_ARES>;
+- reset-names = "pipe",
+- "sleep",
+- "sticky",
+- "axi_m",
+- "axi_s",
+- "ahb",
+- "axi_m_sticky",
+- "axi_s_sticky";
+-
+- status = "disabled";
+- };
+-
+ watchdog at b017000 {
+ compatible = "qcom,kpss-wdt";
+ interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>;
+@@ -617,147 +714,74 @@
+ };
+ };
+
+- mdio: mdio at 90000 {
+- #address-cells = <1>;
+- #size-cells = <0>;
+- compatible = "qcom,ipq6018-mdio", "qcom,ipq4019-mdio";
+- reg = <0x0 0x00090000 0x0 0x64>;
+- clocks = <&gcc GCC_MDIO_AHB_CLK>;
+- clock-names = "gcc_mdio_ahb_clk";
+- status = "disabled";
+- };
+-
+- qusb_phy_1: qusb at 59000 {
+- compatible = "qcom,ipq6018-qusb2-phy";
+- reg = <0x0 0x00059000 0x0 0x180>;
+- #phy-cells = <0>;
+-
+- clocks = <&gcc GCC_USB1_PHY_CFG_AHB_CLK>,
+- <&xo>;
+- clock-names = "cfg_ahb", "ref";
+-
+- resets = <&gcc GCC_QUSB2_1_PHY_BCR>;
+- status = "disabled";
+- };
+-
+- usb2: usb at 70f8800 {
+- compatible = "qcom,ipq6018-dwc3", "qcom,dwc3";
+- reg = <0x0 0x070F8800 0x0 0x400>;
+- #address-cells = <2>;
+- #size-cells = <2>;
+- ranges;
+- clocks = <&gcc GCC_USB1_MASTER_CLK>,
+- <&gcc GCC_USB1_SLEEP_CLK>,
+- <&gcc GCC_USB1_MOCK_UTMI_CLK>;
+- clock-names = "core",
+- "sleep",
+- "mock_utmi";
+-
+- assigned-clocks = <&gcc GCC_USB1_MASTER_CLK>,
+- <&gcc GCC_USB1_MOCK_UTMI_CLK>;
+- assigned-clock-rates = <133330000>,
+- <24000000>;
+- resets = <&gcc GCC_USB1_BCR>;
+- status = "disabled";
+-
+- dwc_1: usb at 7000000 {
+- compatible = "snps,dwc3";
+- reg = <0x0 0x07000000 0x0 0xcd00>;
+- interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+- phys = <&qusb_phy_1>;
+- phy-names = "usb2-phy";
+- tx-fifo-resize;
+- snps,is-utmi-l1-suspend;
+- snps,hird-threshold = /bits/ 8 <0x0>;
+- snps,dis_u2_susphy_quirk;
+- snps,dis_u3_susphy_quirk;
+- dr_mode = "host";
+- };
+- };
++ pcie0: pci at 20000000 {
++ compatible = "qcom,pcie-ipq6018";
++ reg = <0x0 0x20000000 0x0 0xf1d>,
++ <0x0 0x20000f20 0x0 0xa8>,
++ <0x0 0x20001000 0x0 0x1000>,
++ <0x0 0x80000 0x0 0x4000>,
++ <0x0 0x20100000 0x0 0x1000>;
++ reg-names = "dbi", "elbi", "atu", "parf", "config";
+
+- ssphy_0: ssphy at 78000 {
+- compatible = "qcom,ipq6018-qmp-usb3-phy";
+- reg = <0x0 0x00078000 0x0 0x1c4>;
+- #address-cells = <2>;
++ device_type = "pci";
++ linux,pci-domain = <0>;
++ bus-range = <0x00 0xff>;
++ num-lanes = <1>;
++ max-link-speed = <3>;
++ #address-cells = <3>;
+ #size-cells = <2>;
+- ranges;
+-
+- clocks = <&gcc GCC_USB0_AUX_CLK>,
+- <&gcc GCC_USB0_PHY_CFG_AHB_CLK>, <&xo>;
+- clock-names = "aux", "cfg_ahb", "ref";
+-
+- resets = <&gcc GCC_USB0_PHY_BCR>,
+- <&gcc GCC_USB3PHY_0_PHY_BCR>;
+- reset-names = "phy","common";
+- status = "disabled";
+-
+- usb0_ssphy: phy at 78200 {
+- reg = <0x0 0x00078200 0x0 0x130>, /* Tx */
+- <0x0 0x00078400 0x0 0x200>, /* Rx */
+- <0x0 0x00078800 0x0 0x1f8>, /* PCS */
+- <0x0 0x00078600 0x0 0x044>; /* PCS misc */
+- #phy-cells = <0>;
+- #clock-cells = <0>;
+- clocks = <&gcc GCC_USB0_PIPE_CLK>;
+- clock-names = "pipe0";
+- clock-output-names = "gcc_usb0_pipe_clk_src";
+- };
+- };
+
+- qusb_phy_0: qusb at 79000 {
+- compatible = "qcom,ipq6018-qusb2-phy";
+- reg = <0x0 0x00079000 0x0 0x180>;
+- #phy-cells = <0>;
++ phys = <&pcie_phy0>;
++ phy-names = "pciephy";
+
+- clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
+- <&xo>;
+- clock-names = "cfg_ahb", "ref";
++ ranges = <0x81000000 0 0x20200000 0 0x20200000
++ 0 0x10000>, /* downstream I/O */
++ <0x82000000 0 0x20220000 0 0x20220000
++ 0 0xfde0000>; /* non-prefetchable memory */
+
+- resets = <&gcc GCC_QUSB2_0_PHY_BCR>;
+- status = "disabled";
+- };
++ interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
++ interrupt-names = "msi";
+
+- usb3: usb at 8af8800 {
+- compatible = "qcom,ipq6018-dwc3", "qcom,dwc3";
+- reg = <0x0 0x8af8800 0x0 0x400>;
+- #address-cells = <2>;
+- #size-cells = <2>;
+- ranges;
++ #interrupt-cells = <1>;
++ interrupt-map-mask = <0 0 0 0x7>;
++ interrupt-map = <0 0 0 1 &intc 0 75
++ IRQ_TYPE_LEVEL_HIGH>, /* int_a */
++ <0 0 0 2 &intc 0 78
++ IRQ_TYPE_LEVEL_HIGH>, /* int_b */
++ <0 0 0 3 &intc 0 79
++ IRQ_TYPE_LEVEL_HIGH>, /* int_c */
++ <0 0 0 4 &intc 0 83
++ IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+- clocks = <&gcc GCC_SYS_NOC_USB0_AXI_CLK>,
+- <&gcc GCC_USB0_MASTER_CLK>,
+- <&gcc GCC_USB0_SLEEP_CLK>,
+- <&gcc GCC_USB0_MOCK_UTMI_CLK>;
+- clock-names = "cfg_noc",
+- "core",
+- "sleep",
+- "mock_utmi";
++ clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>,
++ <&gcc GCC_PCIE0_AXI_M_CLK>,
++ <&gcc GCC_PCIE0_AXI_S_CLK>,
++ <&gcc GCC_PCIE0_AXI_S_BRIDGE_CLK>,
++ <&gcc PCIE0_RCHNG_CLK>;
++ clock-names = "iface",
++ "axi_m",
++ "axi_s",
++ "axi_bridge",
++ "rchng";
+
+- assigned-clocks = <&gcc GCC_SYS_NOC_USB0_AXI_CLK>,
+- <&gcc GCC_USB0_MASTER_CLK>,
+- <&gcc GCC_USB0_MOCK_UTMI_CLK>;
+- assigned-clock-rates = <133330000>,
+- <133330000>,
+- <24000000>;
++ resets = <&gcc GCC_PCIE0_PIPE_ARES>,
++ <&gcc GCC_PCIE0_SLEEP_ARES>,
++ <&gcc GCC_PCIE0_CORE_STICKY_ARES>,
++ <&gcc GCC_PCIE0_AXI_MASTER_ARES>,
++ <&gcc GCC_PCIE0_AXI_SLAVE_ARES>,
++ <&gcc GCC_PCIE0_AHB_ARES>,
++ <&gcc GCC_PCIE0_AXI_MASTER_STICKY_ARES>,
++ <&gcc GCC_PCIE0_AXI_SLAVE_STICKY_ARES>;
++ reset-names = "pipe",
++ "sleep",
++ "sticky",
++ "axi_m",
++ "axi_s",
++ "ahb",
++ "axi_m_sticky",
++ "axi_s_sticky";
+
+- resets = <&gcc GCC_USB0_BCR>;
+ status = "disabled";
+-
+- dwc_0: usb at 8a00000 {
+- compatible = "snps,dwc3";
+- reg = <0x0 0x8a00000 0x0 0xcd00>;
+- interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+- phys = <&qusb_phy_0>, <&usb0_ssphy>;
+- phy-names = "usb2-phy", "usb3-phy";
+- clocks = <&xo>;
+- clock-names = "ref";
+- tx-fifo-resize;
+- snps,is-utmi-l1-suspend;
+- snps,hird-threshold = /bits/ 8 <0x0>;
+- snps,dis_u2_susphy_quirk;
+- snps,dis_u3_susphy_quirk;
+- dr_mode = "host";
+- };
+ };
+ };
+
+@@ -792,26 +816,4 @@
+ #interrupt-cells = <2>;
+ };
+ };
+-
+- rpm-glink {
+- compatible = "qcom,glink-rpm";
+- interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+- qcom,rpm-msg-ram = <&rpm_msg_ram>;
+- mboxes = <&apcs_glb 0>;
+-
+- rpm_requests: glink-channel {
+- compatible = "qcom,rpm-ipq6018";
+- qcom,glink-channels = "rpm_requests";
+-
+- regulators {
+- compatible = "qcom,rpm-mp5496-regulators";
+-
+- ipq6018_s2: s2 {
+- regulator-min-microvolt = <725000>;
+- regulator-max-microvolt = <1062500>;
+- regulator-always-on;
+- };
+- };
+- };
+- };
+ };
diff --git a/target/linux/qualcommax/patches-6.1/0035-v6.3-arm64-dts-qcom-ipq6018-Add-remove-some-newlines.patch b/target/linux/qualcommax/patches-6.1/0035-v6.3-arm64-dts-qcom-ipq6018-Add-remove-some-newlines.patch
new file mode 100644
index 0000000000..a883e305df
--- /dev/null
+++ b/target/linux/qualcommax/patches-6.1/0035-v6.3-arm64-dts-qcom-ipq6018-Add-remove-some-newlines.patch
@@ -0,0 +1,92 @@
+From 6db9ed9a128cbae1423d043f3debd8bfa77783fd Mon Sep 17 00:00:00 2001
+From: Konrad Dybcio <konrad.dybcio at linaro.org>
+Date: Mon, 2 Jan 2023 10:46:29 +0100
+Subject: [PATCH] arm64: dts: qcom: ipq6018: Add/remove some newlines
+
+Some lines were broken very aggresively, presumably to fit under 80 chars
+and some places could have used a newline, particularly between subsequent
+nodes. Address all that and remove redundant comments near PCIe ranges
+while at it so as not to exceed 100 chars needlessly.
+
+Signed-off-by: Konrad Dybcio <konrad.dybcio at linaro.org>
+Signed-off-by: Bjorn Andersson <andersson at kernel.org>
+Link: https://lore.kernel.org/r/20230102094642.74254-5-konrad.dybcio@linaro.org
+---
+ arch/arm64/boot/dts/qcom/ipq6018.dtsi | 26 ++++++++++++--------------
+ 1 file changed, 12 insertions(+), 14 deletions(-)
+
+--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
++++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+@@ -102,26 +102,31 @@
+ opp-microvolt = <725000>;
+ clock-latency-ns = <200000>;
+ };
++
+ opp-1056000000 {
+ opp-hz = /bits/ 64 <1056000000>;
+ opp-microvolt = <787500>;
+ clock-latency-ns = <200000>;
+ };
++
+ opp-1320000000 {
+ opp-hz = /bits/ 64 <1320000000>;
+ opp-microvolt = <862500>;
+ clock-latency-ns = <200000>;
+ };
++
+ opp-1440000000 {
+ opp-hz = /bits/ 64 <1440000000>;
+ opp-microvolt = <925000>;
+ clock-latency-ns = <200000>;
+ };
++
+ opp-1608000000 {
+ opp-hz = /bits/ 64 <1608000000>;
+ opp-microvolt = <987500>;
+ clock-latency-ns = <200000>;
+ };
++
+ opp-1800000000 {
+ opp-hz = /bits/ 64 <1800000000>;
+ opp-microvolt = <1062500>;
+@@ -131,8 +136,7 @@
+
+ pmuv8: pmu {
+ compatible = "arm,cortex-a53-pmu";
+- interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) |
+- IRQ_TYPE_LEVEL_HIGH)>;
++ interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ psci: psci {
+@@ -734,24 +738,18 @@
+ phys = <&pcie_phy0>;
+ phy-names = "pciephy";
+
+- ranges = <0x81000000 0 0x20200000 0 0x20200000
+- 0 0x10000>, /* downstream I/O */
+- <0x82000000 0 0x20220000 0 0x20220000
+- 0 0xfde0000>; /* non-prefetchable memory */
++ ranges = <0x81000000 0 0x20200000 0 0x20200000 0 0x10000>,
++ <0x82000000 0 0x20220000 0 0x20220000 0 0xfde0000>;
+
+ interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi";
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+- interrupt-map = <0 0 0 1 &intc 0 75
+- IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+- <0 0 0 2 &intc 0 78
+- IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+- <0 0 0 3 &intc 0 79
+- IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+- <0 0 0 4 &intc 0 83
+- IRQ_TYPE_LEVEL_HIGH>; /* int_d */
++ interrupt-map = <0 0 0 1 &intc 0 75 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
++ <0 0 0 2 &intc 0 78 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
++ <0 0 0 3 &intc 0 79 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
++ <0 0 0 4 &intc 0 83 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+ clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>,
+ <&gcc GCC_PCIE0_AXI_M_CLK>,
diff --git a/target/linux/qualcommax/patches-6.1/0036-v6.3-arm64-dts-qcom-ipq6018-Use-lowercase-hex.patch b/target/linux/qualcommax/patches-6.1/0036-v6.3-arm64-dts-qcom-ipq6018-Use-lowercase-hex.patch
new file mode 100644
index 0000000000..35aa46bb10
--- /dev/null
+++ b/target/linux/qualcommax/patches-6.1/0036-v6.3-arm64-dts-qcom-ipq6018-Use-lowercase-hex.patch
@@ -0,0 +1,25 @@
+From 7356ae3e10abd1d71f06ff0b8a8e72aa7c955c57 Mon Sep 17 00:00:00 2001
+From: Konrad Dybcio <konrad.dybcio at linaro.org>
+Date: Mon, 2 Jan 2023 10:46:30 +0100
+Subject: [PATCH] arm64: dts: qcom: ipq6018: Use lowercase hex
+
+One value escaped my previous lowercase hexification. Take care of it.
+
+Signed-off-by: Konrad Dybcio <konrad.dybcio at linaro.org>
+Signed-off-by: Bjorn Andersson <andersson at kernel.org>
+Link: https://lore.kernel.org/r/20230102094642.74254-6-konrad.dybcio@linaro.org
+---
+ arch/arm64/boot/dts/qcom/ipq6018.dtsi | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
++++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+@@ -381,7 +381,7 @@
+
+ usb2: usb at 70f8800 {
+ compatible = "qcom,ipq6018-dwc3", "qcom,dwc3";
+- reg = <0x0 0x070F8800 0x0 0x400>;
++ reg = <0x0 0x070f8800 0x0 0x400>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
diff --git a/target/linux/qualcommax/patches-6.1/0037-v6.3-arm64-dts-qcom-ipq6018-align-RPM-G-Link-node-with.patch b/target/linux/qualcommax/patches-6.1/0037-v6.3-arm64-dts-qcom-ipq6018-align-RPM-G-Link-node-with.patch
new file mode 100644
index 0000000000..c939d126bf
--- /dev/null
+++ b/target/linux/qualcommax/patches-6.1/0037-v6.3-arm64-dts-qcom-ipq6018-align-RPM-G-Link-node-with.patch
@@ -0,0 +1,28 @@
+From 679ee73bbee28cab441008f8cca38160cc8f3d05 Mon Sep 17 00:00:00 2001
+From: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
+Date: Wed, 8 Feb 2023 11:15:39 +0100
+Subject: [PATCH] arm64: dts: qcom: ipq6018: align RPM G-Link node with
+ bindings
+
+Bindings expect (and most of DTS use) the RPM G-Link node name to be
+"rpm-requests".
+
+Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
+Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
+Signed-off-by: Bjorn Andersson <andersson at kernel.org>
+Link: https://lore.kernel.org/r/20230208101545.45711-1-krzysztof.kozlowski@linaro.org
+---
+ arch/arm64/boot/dts/qcom/ipq6018.dtsi | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
++++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+@@ -176,7 +176,7 @@
+ qcom,rpm-msg-ram = <&rpm_msg_ram>;
+ mboxes = <&apcs_glb 0>;
+
+- rpm_requests: glink-channel {
++ rpm_requests: rpm-requests {
+ compatible = "qcom,rpm-ipq6018";
+ qcom,glink-channels = "rpm_requests";
+
diff --git a/target/linux/qualcommax/patches-6.1/0038-v6.4-arm64-dts-qcom-ipq6018-cp01-c1-drop-SPI-cs-select.patch b/target/linux/qualcommax/patches-6.1/0038-v6.4-arm64-dts-qcom-ipq6018-cp01-c1-drop-SPI-cs-select.patch
new file mode 100644
index 0000000000..28688069b8
--- /dev/null
+++ b/target/linux/qualcommax/patches-6.1/0038-v6.4-arm64-dts-qcom-ipq6018-cp01-c1-drop-SPI-cs-select.patch
@@ -0,0 +1,27 @@
+From afa8eb675fc6dd606783ed2350de90927d6fb9d3 Mon Sep 17 00:00:00 2001
+From: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
+Date: Wed, 8 Mar 2023 13:59:01 +0100
+Subject: [PATCH] arm64: dts: qcom: ipq6018-cp01-c1: drop SPI cs-select
+
+The SPI controller nodes do not use/allow cs-select property:
+
+ ipq6018-cp01-c1.dtb: spi at 78b5000: Unevaluated properties are not allowed ('cs-select' was unexpected)
+
+Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
+Reviewed-by: Konrad Dybcio <konrad.dybcio at linaro.org>
+Signed-off-by: Bjorn Andersson <andersson at kernel.org>
+Link: https://lore.kernel.org/r/20230308125906.236885-6-krzysztof.kozlowski@linaro.org
+---
+ arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts | 1 -
+ 1 file changed, 1 deletion(-)
+
+--- a/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts
++++ b/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts
+@@ -36,7 +36,6 @@
+ };
+
+ &blsp1_spi1 {
+- cs-select = <0>;
+ pinctrl-0 = <&spi_0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
diff --git a/target/linux/qualcommax/patches-6.1/0039-v6.5-arm64-dts-qcom-add-few-more-reserved-memory-region.patch b/target/linux/qualcommax/patches-6.1/0039-v6.5-arm64-dts-qcom-add-few-more-reserved-memory-region.patch
new file mode 100644
index 0000000000..d1280b528b
--- /dev/null
+++ b/target/linux/qualcommax/patches-6.1/0039-v6.5-arm64-dts-qcom-add-few-more-reserved-memory-region.patch
@@ -0,0 +1,92 @@
+From 0cd4e90cb2dec02ff859f5c98f744f43a23aea65 Mon Sep 17 00:00:00 2001
+From: Vignesh Viswanathan <quic_viswanat at quicinc.com>
+Date: Fri, 26 May 2023 16:36:53 +0530
+Subject: [PATCH] arm64: dts: qcom: add few more reserved memory region
+
+In IPQ SoCs, bootloader will collect the system RAM contents upon crash
+for the post morterm analysis. If we don't reserve the memory region used
+by bootloader, obviously linux will consume it and upon next boot on
+crash, bootloader will be loaded in the same region, which will lead to
+loose some of the data, sometimes we may miss out critical information.
+So lets reserve the region used by the bootloader.
+
+Similarly SBL copies some data into the reserved region and it will be
+used in the crash scenario. So reserve 1MB for SBL as well.
+
+While at it, drop the size padding in the reserved memory region,
+wherever applicable.
+
+Signed-off-by: Vignesh Viswanathan <quic_viswanat at quicinc.com>
+Signed-off-by: Bjorn Andersson <andersson at kernel.org>
+Link: https://lore.kernel.org/r/20230526110653.27777-4-quic_viswanat@quicinc.com
+---
+ arch/arm64/boot/dts/qcom/ipq6018.dtsi | 16 +++++++++++++---
+ arch/arm64/boot/dts/qcom/ipq8074.dtsi | 14 ++++++++++++--
+ 2 files changed, 25 insertions(+), 5 deletions(-)
+
+--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
++++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+@@ -154,18 +154,28 @@
+ no-map;
+ };
+
++ bootloader at 4a100000 {
++ reg = <0x0 0x4a100000 0x0 0x400000>;
++ no-map;
++ };
++
++ sbl at 4a500000 {
++ reg = <0x0 0x4a500000 0x0 0x100000>;
++ no-map;
++ };
++
+ tz: memory at 4a600000 {
+- reg = <0x0 0x4a600000 0x0 0x00400000>;
++ reg = <0x0 0x4a600000 0x0 0x400000>;
+ no-map;
+ };
+
+ smem_region: memory at 4aa00000 {
+- reg = <0x0 0x4aa00000 0x0 0x00100000>;
++ reg = <0x0 0x4aa00000 0x0 0x100000>;
+ no-map;
+ };
+
+ q6_region: memory at 4ab00000 {
+- reg = <0x0 0x4ab00000 0x0 0x05500000>;
++ reg = <0x0 0x4ab00000 0x0 0x5500000>;
+ no-map;
+ };
+ };
+--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+@@ -85,17 +85,27 @@
+ #size-cells = <2>;
+ ranges;
+
++ bootloader at 4a600000 {
++ reg = <0x0 0x4a600000 0x0 0x400000>;
++ no-map;
++ };
++
++ sbl at 4aa00000 {
++ reg = <0x0 0x4aa00000 0x0 0x100000>;
++ no-map;
++ };
++
+ smem at 4ab00000 {
+ compatible = "qcom,smem";
+- reg = <0x0 0x4ab00000 0x0 0x00100000>;
++ reg = <0x0 0x4ab00000 0x0 0x100000>;
+ no-map;
+
+ hwlocks = <&tcsr_mutex 3>;
+ };
+
+ memory at 4ac00000 {
++ reg = <0x0 0x4ac00000 0x0 0x400000>;
+ no-map;
+- reg = <0x0 0x4ac00000 0x0 0x00400000>;
+ };
+ };
+
diff --git a/target/linux/qualcommax/patches-6.1/0040-v6.5-arm64-dts-qcom-enable-the-download-mode-support.patch b/target/linux/qualcommax/patches-6.1/0040-v6.5-arm64-dts-qcom-enable-the-download-mode-support.patch
new file mode 100644
index 0000000000..6dd185f6e0
--- /dev/null
+++ b/target/linux/qualcommax/patches-6.1/0040-v6.5-arm64-dts-qcom-enable-the-download-mode-support.patch
@@ -0,0 +1,49 @@
+From 9b2406aaba7841863ac041225316c1ec1c86ea36 Mon Sep 17 00:00:00 2001
+From: Vignesh Viswanathan <quic_viswanat at quicinc.com>
+Date: Fri, 26 May 2023 16:36:52 +0530
+Subject: [PATCH] arm64: dts: qcom: enable the download mode support
+
+Like any other Qualcomm SoCs, IPQ8074 and IPQ6018 also supports the
+download mode to collect the RAM dumps if system crashes, to perform
+the post mortem analysis. Add support for the same.
+
+Signed-off-by: Vignesh Viswanathan <quic_viswanat at quicinc.com>
+Signed-off-by: Bjorn Andersson <andersson at kernel.org>
+Link: https://lore.kernel.org/r/20230526110653.27777-3-quic_viswanat@quicinc.com
+---
+ arch/arm64/boot/dts/qcom/ipq6018.dtsi | 1 +
+ arch/arm64/boot/dts/qcom/ipq8074.dtsi | 6 ++++++
+ 2 files changed, 7 insertions(+)
+
+--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
++++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+@@ -90,6 +90,7 @@
+ firmware {
+ scm {
+ compatible = "qcom,scm-ipq6018", "qcom,scm";
++ qcom,dload-mode = <&tcsr 0x6100>;
+ };
+ };
+
+--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+@@ -112,6 +112,7 @@
+ firmware {
+ scm {
+ compatible = "qcom,scm-ipq8074", "qcom,scm";
++ qcom,dload-mode = <&tcsr 0x6100>;
+ };
+ };
+
+@@ -386,6 +387,11 @@
+ #hwlock-cells = <1>;
+ };
+
++ tcsr: syscon at 1937000 {
++ compatible = "qcom,tcsr-ipq8074", "syscon";
++ reg = <0x01937000 0x21000>;
++ };
++
+ spmi_bus: spmi at 200f000 {
+ compatible = "qcom,spmi-pmic-arb";
+ reg = <0x0200f000 0x001000>,
diff --git a/target/linux/qualcommax/patches-6.1/0041-v6.5-arm64-dts-qcom-ipq6018-correct-qrng-unit-address.patch b/target/linux/qualcommax/patches-6.1/0041-v6.5-arm64-dts-qcom-ipq6018-correct-qrng-unit-address.patch
new file mode 100644
index 0000000000..e9b92b596e
--- /dev/null
+++ b/target/linux/qualcommax/patches-6.1/0041-v6.5-arm64-dts-qcom-ipq6018-correct-qrng-unit-address.patch
@@ -0,0 +1,29 @@
+From 085058786a7890dd44ec623fe5ac74db870f6b93 Mon Sep 17 00:00:00 2001
+From: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
+Date: Wed, 19 Apr 2023 23:18:39 +0200
+Subject: [PATCH] arm64: dts: qcom: ipq6018: correct qrng unit address
+
+Match unit-address to reg entry to fix dtbs W=1 warnings:
+
+ Warning (simple_bus_reg): /soc/qrng at e1000: simple-bus unit address format error, expected "e3000"
+
+Fixes: 5bf635621245 ("arm64: dts: ipq6018: Add a few device nodes")
+Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
+Reviewed-by: Konrad Dybcio <konrad.dybcio at linaro.org>
+Signed-off-by: Bjorn Andersson <andersson at kernel.org>
+Link: https://lore.kernel.org/r/20230419211856.79332-1-krzysztof.kozlowski@linaro.org
+---
+ arch/arm64/boot/dts/qcom/ipq6018.dtsi | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
++++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+@@ -312,7 +312,7 @@
+ status = "disabled";
+ };
+
+- prng: qrng at e1000 {
++ prng: qrng at e3000 {
+ compatible = "qcom,prng-ee";
+ reg = <0x0 0x000e3000 0x0 0x1000>;
+ clocks = <&gcc GCC_PRNG_AHB_CLK>;
diff --git a/target/linux/qualcommax/patches-6.1/0042-v6.5-arm64-dts-qcom-ipq6018-add-unit-address-to-soc-node.patch b/target/linux/qualcommax/patches-6.1/0042-v6.5-arm64-dts-qcom-ipq6018-add-unit-address-to-soc-node.patch
new file mode 100644
index 0000000000..821c9890c6
--- /dev/null
+++ b/target/linux/qualcommax/patches-6.1/0042-v6.5-arm64-dts-qcom-ipq6018-add-unit-address-to-soc-node.patch
@@ -0,0 +1,28 @@
+From 393595d4ffbd0a1fafd5548f8de1b8487a037cf2 Mon Sep 17 00:00:00 2001
+From: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
+Date: Thu, 20 Apr 2023 08:36:04 +0200
+Subject: [PATCH] arm64: dts: qcom: ipq6018: add unit address to soc node
+
+"soc" node is supposed to have unit address:
+
+ Warning (unit_address_vs_reg): /soc: node has a reg or ranges property, but no unit name
+
+Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
+Reviewed-by: Konrad Dybcio <konrad.dybcio at linaro.org>
+Signed-off-by: Bjorn Andersson <andersson at kernel.org>
+Link: https://lore.kernel.org/r/20230420063610.11068-1-krzysztof.kozlowski@linaro.org
+---
+ arch/arm64/boot/dts/qcom/ipq6018.dtsi | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
++++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+@@ -209,7 +209,7 @@
+ hwlocks = <&tcsr_mutex 3>;
+ };
+
+- soc: soc {
++ soc: soc at 0 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0 0 0 0 0x0 0xffffffff>;
diff --git a/target/linux/qualcommax/patches-6.1/0037-v6.5-arm64-dts-qcom-ipq6018-add-QFPROM-node.patch b/target/linux/qualcommax/patches-6.1/0043-v6.5-arm64-dts-qcom-ipq6018-add-QFPROM-node.patch
similarity index 92%
rename from target/linux/qualcommax/patches-6.1/0037-v6.5-arm64-dts-qcom-ipq6018-add-QFPROM-node.patch
rename to target/linux/qualcommax/patches-6.1/0043-v6.5-arm64-dts-qcom-ipq6018-add-QFPROM-node.patch
index 552f2568b5..68895c5c96 100644
--- a/target/linux/qualcommax/patches-6.1/0037-v6.5-arm64-dts-qcom-ipq6018-add-QFPROM-node.patch
+++ b/target/linux/qualcommax/patches-6.1/0043-v6.5-arm64-dts-qcom-ipq6018-add-QFPROM-node.patch
@@ -18,9 +18,9 @@ Link: https://lore.kernel.org/r/20230526125305.19626-4-quic_kathirav@quicinc.com
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
-@@ -179,6 +179,13 @@
- dma-ranges;
- compatible = "simple-bus";
+@@ -312,6 +312,13 @@
+ status = "disabled";
+ };
+ qfprom: efuse at a4000 {
+ compatible = "qcom,ipq6018-qfprom", "qcom,qfprom";
@@ -29,6 +29,6 @@ Link: https://lore.kernel.org/r/20230526125305.19626-4-quic_kathirav@quicinc.com
+ #size-cells = <1>;
+ };
+
- prng: qrng at e1000 {
+ prng: qrng at e3000 {
compatible = "qcom,prng-ee";
reg = <0x0 0x000e3000 0x0 0x1000>;
diff --git a/target/linux/qualcommax/patches-6.1/0044-v6.5-arm64-dts-qcom-ipq6018-drop-incorrect-SPI-bus.patch b/target/linux/qualcommax/patches-6.1/0044-v6.5-arm64-dts-qcom-ipq6018-drop-incorrect-SPI-bus.patch
new file mode 100644
index 0000000000..b2057e588e
--- /dev/null
+++ b/target/linux/qualcommax/patches-6.1/0044-v6.5-arm64-dts-qcom-ipq6018-drop-incorrect-SPI-bus.patch
@@ -0,0 +1,37 @@
+From b8420d478aa3fc739fcdba6b4b945850b356cb3b Mon Sep 17 00:00:00 2001
+From: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
+Date: Sun, 16 Apr 2023 14:37:25 +0200
+Subject: [PATCH] arm64: dts: qcom: ipq6018: drop incorrect SPI bus
+ spi-max-frequency
+
+The spi-max-frequency property belongs to SPI devices, not SPI
+controller:
+
+ ipq6018-cp01-c1.dtb: spi at 78b5000: Unevaluated properties are not allowed ('spi-max-frequency' was unexpected)
+
+Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
+Reviewed-by: Konrad Dybcio <konrad.dybcio at linaro.org>
+Signed-off-by: Bjorn Andersson <andersson at kernel.org>
+Link: https://lore.kernel.org/r/20230416123730.300863-1-krzysztof.kozlowski@linaro.org
+---
+ arch/arm64/boot/dts/qcom/ipq6018.dtsi | 2 --
+ 1 file changed, 2 deletions(-)
+
+--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
++++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+@@ -458,7 +458,6 @@
+ #size-cells = <0>;
+ reg = <0x0 0x078b5000 0x0 0x600>;
+ interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+- spi-max-frequency = <50000000>;
+ clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+@@ -473,7 +472,6 @@
+ #size-cells = <0>;
+ reg = <0x0 0x078b6000 0x0 0x600>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+- spi-max-frequency = <50000000>;
+ clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
diff --git a/target/linux/qualcommax/patches-6.1/0045-v6.5-arm64-dts-qcom-ipq8074-drop-incorrect-SPI-bus.patch b/target/linux/qualcommax/patches-6.1/0045-v6.5-arm64-dts-qcom-ipq8074-drop-incorrect-SPI-bus.patch
new file mode 100644
index 0000000000..52ba16cc9f
--- /dev/null
+++ b/target/linux/qualcommax/patches-6.1/0045-v6.5-arm64-dts-qcom-ipq8074-drop-incorrect-SPI-bus.patch
@@ -0,0 +1,29 @@
+From e6e0e706940b64e3a77e0a4840037692f109bd5f Mon Sep 17 00:00:00 2001
+From: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
+Date: Sun, 16 Apr 2023 14:37:26 +0200
+Subject: [PATCH] arm64: dts: qcom: ipq8074: drop incorrect SPI bus
+ spi-max-frequency
+
+The spi-max-frequency property belongs to SPI devices, not SPI
+controller:
+
+ ipq8074-hk01.dtb: spi at 78b5000: Unevaluated properties are not allowed ('spi-max-frequency' was unexpected)
+
+Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
+Reviewed-by: Konrad Dybcio <konrad.dybcio at linaro.org>
+Signed-off-by: Bjorn Andersson <andersson at kernel.org>
+Link: https://lore.kernel.org/r/20230416123730.300863-2-krzysztof.kozlowski@linaro.org
+---
+ arch/arm64/boot/dts/qcom/ipq8074.dtsi | 1 -
+ 1 file changed, 1 deletion(-)
+
+--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+@@ -487,7 +487,6 @@
+ #size-cells = <0>;
+ reg = <0x078b5000 0x600>;
+ interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+- spi-max-frequency = <50000000>;
+ clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
diff --git a/target/linux/qualcommax/patches-6.1/0046-v6.6-clk-qcom-gcc-ipq6018-Use-floor-ops-for-sdcc-clocks.patch b/target/linux/qualcommax/patches-6.1/0046-v6.6-clk-qcom-gcc-ipq6018-Use-floor-ops-for-sdcc-clocks.patch
new file mode 100644
index 0000000000..9ae72730d8
--- /dev/null
+++ b/target/linux/qualcommax/patches-6.1/0046-v6.6-clk-qcom-gcc-ipq6018-Use-floor-ops-for-sdcc-clocks.patch
@@ -0,0 +1,27 @@
+From 56e5ae0116aef87273cf1812d608645b076e4f02 Mon Sep 17 00:00:00 2001
+From: Mantas Pucka <mantas at 8devices.com>
+Date: Tue, 25 Apr 2023 12:11:49 +0300
+Subject: [PATCH] clk: qcom: gcc-ipq6018: Use floor ops for sdcc clocks
+
+SDCC clocks must be rounded down to avoid overclocking the controller.
+
+Fixes: d9db07f088af ("clk: qcom: Add ipq6018 Global Clock Controller support")
+Signed-off-by: Mantas Pucka <mantas at 8devices.com>
+Reviewed-by: Konrad Dybcio <konrad.dybcio at linaro.org>
+Signed-off-by: Bjorn Andersson <andersson at kernel.org>
+Link: https://lore.kernel.org/r/1682413909-24927-1-git-send-email-mantas@8devices.com
+---
+ drivers/clk/qcom/gcc-ipq6018.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/drivers/clk/qcom/gcc-ipq6018.c
++++ b/drivers/clk/qcom/gcc-ipq6018.c
+@@ -1702,7 +1702,7 @@ static struct clk_rcg2 usb0_mock_utmi_cl
+ .name = "usb0_mock_utmi_clk_src",
+ .parent_data = gcc_xo_gpll6_gpll0_gpll0_out_main_div2,
+ .num_parents = 4,
+- .ops = &clk_rcg2_ops,
++ .ops = &clk_rcg2_floor_ops,
+ },
+ };
+
diff --git a/target/linux/qualcommax/patches-6.1/0026-v6.5-clk-qcom-gcc-ipq6018-drop-redundant-F-define.patch b/target/linux/qualcommax/patches-6.1/0047-v6.6-clk-qcom-gcc-ipq6018-drop-redundant-F-define.patch
similarity index 92%
rename from target/linux/qualcommax/patches-6.1/0026-v6.5-clk-qcom-gcc-ipq6018-drop-redundant-F-define.patch
rename to target/linux/qualcommax/patches-6.1/0047-v6.6-clk-qcom-gcc-ipq6018-drop-redundant-F-define.patch
index 30da78f08e..19dc9482e6 100644
--- a/target/linux/qualcommax/patches-6.1/0026-v6.5-clk-qcom-gcc-ipq6018-drop-redundant-F-define.patch
+++ b/target/linux/qualcommax/patches-6.1/0047-v6.6-clk-qcom-gcc-ipq6018-drop-redundant-F-define.patch
@@ -1,4 +1,4 @@
-From 1e8a314a1b87eaba496fcc6dc0efef573b3c186d Mon Sep 17 00:00:00 2001
+From 923f7d678b2ae3d522543058514d5605c185633b Mon Sep 17 00:00:00 2001
From: Christian Marangi <ansuelsmth at gmail.com>
Date: Mon, 17 Apr 2023 19:44:07 +0200
Subject: [PATCH] clk: qcom: gcc-ipq6018: drop redundant F define
diff --git a/target/linux/qualcommax/patches-6.1/0033-v6.5-clk-qcom-gcc-ipq6018-update-UBI32-PLL.patch b/target/linux/qualcommax/patches-6.1/0048-v6.6-clk-qcom-gcc-ipq6018-update-UBI32-PLL.patch
similarity index 94%
rename from target/linux/qualcommax/patches-6.1/0033-v6.5-clk-qcom-gcc-ipq6018-update-UBI32-PLL.patch
rename to target/linux/qualcommax/patches-6.1/0048-v6.6-clk-qcom-gcc-ipq6018-update-UBI32-PLL.patch
index 7f53734f29..e38b40278c 100644
--- a/target/linux/qualcommax/patches-6.1/0033-v6.5-clk-qcom-gcc-ipq6018-update-UBI32-PLL.patch
+++ b/target/linux/qualcommax/patches-6.1/0048-v6.6-clk-qcom-gcc-ipq6018-update-UBI32-PLL.patch
@@ -1,4 +1,4 @@
-From 91e7c87f0ec1d644afb65cf3a16ded874c9d4ab9 Mon Sep 17 00:00:00 2001
+From f4f0c8acee0e41c5fbae7a7ad06087668ddce0d6 Mon Sep 17 00:00:00 2001
From: Robert Marko <robimarko at gmail.com>
Date: Fri, 26 May 2023 21:08:54 +0200
Subject: [PATCH] clk: qcom: gcc-ipq6018: update UBI32 PLL
diff --git a/target/linux/qualcommax/patches-6.1/0034-v6.5-clk-qcom-gcc-ipq6018-remove-duplicate-initializers.patch b/target/linux/qualcommax/patches-6.1/0049-v6.6-clk-qcom-gcc-ipq6018-remove-duplicate-initializers.patch
similarity index 95%
rename from target/linux/qualcommax/patches-6.1/0034-v6.5-clk-qcom-gcc-ipq6018-remove-duplicate-initializers.patch
rename to target/linux/qualcommax/patches-6.1/0049-v6.6-clk-qcom-gcc-ipq6018-remove-duplicate-initializers.patch
index 2de9efd376..e4faac1b6e 100644
--- a/target/linux/qualcommax/patches-6.1/0034-v6.5-clk-qcom-gcc-ipq6018-remove-duplicate-initializers.patch
+++ b/target/linux/qualcommax/patches-6.1/0049-v6.6-clk-qcom-gcc-ipq6018-remove-duplicate-initializers.patch
@@ -1,4 +1,4 @@
-From 3f2fbfe6e4f6f2bdd1da8ef5aceba3945c4ada57 Mon Sep 17 00:00:00 2001
+From 5ae7899765607e97e5eb34486336898c8d9ec654 Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd at arndb.de>
Date: Thu, 1 Jun 2023 23:34:12 +0200
Subject: [PATCH] clk: qcom: gcc-ipq6018: remove duplicate initializers
diff --git a/target/linux/qualcommax/patches-6.1/0050-v6.6-soc-qcom-Add-RPM-processor-subsystem-driver.patch b/target/linux/qualcommax/patches-6.1/0050-v6.6-soc-qcom-Add-RPM-processor-subsystem-driver.patch
new file mode 100644
index 0000000000..c2c26fb079
--- /dev/null
+++ b/target/linux/qualcommax/patches-6.1/0050-v6.6-soc-qcom-Add-RPM-processor-subsystem-driver.patch
@@ -0,0 +1,132 @@
+From 8ddfa81d090c71fd6cb3cb8ca1d420c0da33a575 Mon Sep 17 00:00:00 2001
+From: Stephan Gerhold <stephan at gerhold.net>
+Date: Thu, 15 Jun 2023 18:50:42 +0200
+Subject: [PATCH] soc: qcom: Add RPM processor/subsystem driver
+
+Add a simple driver for the qcom,rpm-proc compatible that registers the
+"smd-edge" and populates other children defined in the device tree.
+
+Note that the DT schema belongs to the remoteproc subsystem while this
+driver is added inside soc/qcom. I argue that the RPM *is* a remoteproc,
+but as an implementation detail in Linux it can currently not benefit
+from anything provided by the remoteproc subsystem. The RPM firmware is
+usually already loaded and started by earlier components in the boot
+chain and is not meant to be ever restarted.
+
+To avoid breaking existing kernel configurations the driver is always
+built when smd-rpm.c is also built. They belong closely together anyway.
+To avoid build errors CONFIG_RPMSG_QCOM_SMD must be also built-in if
+rpm-proc is.
+
+Reviewed-by: Konrad Dybcio <konrad.dybcio at linaro.org>
+Signed-off-by: Stephan Gerhold <stephan at gerhold.net>
+Link: https://lore.kernel.org/r/20230531-rpm-rproc-v3-9-a07dcdefd918@gerhold.net
+Signed-off-by: Bjorn Andersson <andersson at kernel.org>
+---
+ drivers/soc/qcom/Kconfig | 1 +
+ drivers/soc/qcom/Makefile | 2 +-
+ drivers/soc/qcom/rpm-proc.c | 77 +++++++++++++++++++++++++++++++++++++
+ 3 files changed, 79 insertions(+), 1 deletion(-)
+ create mode 100644 drivers/soc/qcom/rpm-proc.c
+
+--- a/drivers/soc/qcom/Kconfig
++++ b/drivers/soc/qcom/Kconfig
+@@ -153,6 +153,7 @@ config QCOM_SMD_RPM
+ tristate "Qualcomm Resource Power Manager (RPM) over SMD"
+ depends on ARCH_QCOM || COMPILE_TEST
+ depends on RPMSG
++ depends on RPMSG_QCOM_SMD || RPMSG_QCOM_SMD=n
+ help
+ If you say yes to this option, support will be included for the
+ Resource Power Manager system found in the Qualcomm 8974 based
+--- a/drivers/soc/qcom/Makefile
++++ b/drivers/soc/qcom/Makefile
+@@ -14,7 +14,7 @@ obj-$(CONFIG_QCOM_RMTFS_MEM) += rmtfs_me
+ obj-$(CONFIG_QCOM_RPMH) += qcom_rpmh.o
+ qcom_rpmh-y += rpmh-rsc.o
+ qcom_rpmh-y += rpmh.o
+-obj-$(CONFIG_QCOM_SMD_RPM) += smd-rpm.o
++obj-$(CONFIG_QCOM_SMD_RPM) += rpm-proc.o smd-rpm.o
+ obj-$(CONFIG_QCOM_SMEM) += smem.o
+ obj-$(CONFIG_QCOM_SMEM_STATE) += smem_state.o
+ obj-$(CONFIG_QCOM_SMP2P) += smp2p.o
+--- /dev/null
++++ b/drivers/soc/qcom/rpm-proc.c
+@@ -0,0 +1,77 @@
++// SPDX-License-Identifier: GPL-2.0-only
++/* Copyright (c) 2021-2023, Stephan Gerhold <stephan at gerhold.net> */
++
++#include <linux/module.h>
++#include <linux/of.h>
++#include <linux/of_platform.h>
++#include <linux/platform_device.h>
++#include <linux/rpmsg/qcom_smd.h>
++
++static int rpm_proc_probe(struct platform_device *pdev)
++{
++ struct qcom_smd_edge *edge = NULL;
++ struct device *dev = &pdev->dev;
++ struct device_node *edge_node;
++ int ret;
++
++ edge_node = of_get_child_by_name(dev->of_node, "smd-edge");
++ if (edge_node) {
++ edge = qcom_smd_register_edge(dev, edge_node);
++ of_node_put(edge_node);
++ if (IS_ERR(edge))
++ return dev_err_probe(dev, PTR_ERR(edge),
++ "Failed to register smd-edge\n");
++ }
++
++ ret = devm_of_platform_populate(dev);
++ if (ret) {
++ dev_err(dev, "Failed to populate child devices: %d\n", ret);
++ goto err;
++ }
++
++ platform_set_drvdata(pdev, edge);
++ return 0;
++err:
++ if (edge)
++ qcom_smd_unregister_edge(edge);
++ return ret;
++}
++
++static void rpm_proc_remove(struct platform_device *pdev)
++{
++ struct qcom_smd_edge *edge = platform_get_drvdata(pdev);
++
++ if (edge)
++ qcom_smd_unregister_edge(edge);
++}
++
++static const struct of_device_id rpm_proc_of_match[] = {
++ { .compatible = "qcom,rpm-proc", },
++ { /* sentinel */ }
++};
++MODULE_DEVICE_TABLE(of, rpm_proc_of_match);
++
++static struct platform_driver rpm_proc_driver = {
++ .probe = rpm_proc_probe,
++ .remove_new = rpm_proc_remove,
++ .driver = {
++ .name = "qcom-rpm-proc",
++ .of_match_table = rpm_proc_of_match,
++ },
++};
++
++static int __init rpm_proc_init(void)
++{
++ return platform_driver_register(&rpm_proc_driver);
++}
++arch_initcall(rpm_proc_init);
++
++static void __exit rpm_proc_exit(void)
++{
++ platform_driver_unregister(&rpm_proc_driver);
++}
++module_exit(rpm_proc_exit);
++
++MODULE_DESCRIPTION("Qualcomm RPM processor/subsystem driver");
++MODULE_AUTHOR("Stephan Gerhold <stephan at gerhold.net>");
++MODULE_LICENSE("GPL");
diff --git a/target/linux/qualcommax/patches-6.1/0051-v6.6-arm64-dts-qcom-Add-rpm-proc-node-for-GLINK.patch b/target/linux/qualcommax/patches-6.1/0051-v6.6-arm64-dts-qcom-Add-rpm-proc-node-for-GLINK.patch
new file mode 100644
index 0000000000..746a391b42
--- /dev/null
+++ b/target/linux/qualcommax/patches-6.1/0051-v6.6-arm64-dts-qcom-Add-rpm-proc-node-for-GLINK.patch
@@ -0,0 +1,93 @@
+From 7e1acc8b92a3b67db1e5255adae2851d58d74434 Mon Sep 17 00:00:00 2001
+From: Stephan Gerhold <stephan at gerhold.net>
+Date: Thu, 15 Jun 2023 18:50:44 +0200
+Subject: [PATCH] arm64: dts: qcom: Add rpm-proc node for GLINK gplatforms
+
+Rather than having the RPM GLINK channels as the only child of a dummy
+top-level rpm-glink node, switch to representing the RPM as remoteproc
+like all the other remoteprocs (modem DSP, ...).
+
+This allows assigning additional subdevices to it like the MPM
+interrupt-controller or rpm-master-stats.
+
+Tested-by: Konrad Dybcio <konrad.dybcio at linaro.org> # SM6375
+Signed-off-by: Stephan Gerhold <stephan at gerhold.net>
+Link: https://lore.kernel.org/r/20230531-rpm-rproc-v3-11-a07dcdefd918@gerhold.net
+Signed-off-by: Bjorn Andersson <andersson at kernel.org>
+---
+ arch/arm64/boot/dts/qcom/ipq6018.dtsi | 48 ++++----
+ arch/arm64/boot/dts/qcom/ipq9574.dtsi | 28 +++--
+ arch/arm64/boot/dts/qcom/msm8996.dtsi | 113 +++++++++----------
+ arch/arm64/boot/dts/qcom/msm8998.dtsi | 102 ++++++++---------
+ arch/arm64/boot/dts/qcom/qcm2290.dtsi | 126 ++++++++++-----------
+ arch/arm64/boot/dts/qcom/qcs404.dtsi | 152 +++++++++++++-------------
+ arch/arm64/boot/dts/qcom/sdm630.dtsi | 132 +++++++++++-----------
+ arch/arm64/boot/dts/qcom/sm6115.dtsi | 128 +++++++++++-----------
+ arch/arm64/boot/dts/qcom/sm6125.dtsi | 140 ++++++++++++------------
+ arch/arm64/boot/dts/qcom/sm6375.dtsi | 126 ++++++++++-----------
+ 10 files changed, 566 insertions(+), 529 deletions(-)
+
+--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
++++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+@@ -145,6 +145,32 @@
+ method = "smc";
+ };
+
++ rpm: remoteproc {
++ compatible = "qcom,ipq6018-rpm-proc", "qcom,rpm-proc";
++
++ glink-edge {
++ compatible = "qcom,glink-rpm";
++ interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
++ qcom,rpm-msg-ram = <&rpm_msg_ram>;
++ mboxes = <&apcs_glb 0>;
++
++ rpm_requests: rpm-requests {
++ compatible = "qcom,rpm-ipq6018";
++ qcom,glink-channels = "rpm_requests";
++
++ regulators {
++ compatible = "qcom,rpm-mp5496-regulators";
++
++ ipq6018_s2: s2 {
++ regulator-min-microvolt = <725000>;
++ regulator-max-microvolt = <1062500>;
++ regulator-always-on;
++ };
++ };
++ };
++ };
++ };
++
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+@@ -181,28 +207,6 @@
+ };
+ };
+
+- rpm-glink {
+- compatible = "qcom,glink-rpm";
+- interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+- qcom,rpm-msg-ram = <&rpm_msg_ram>;
+- mboxes = <&apcs_glb 0>;
+-
+- rpm_requests: rpm-requests {
+- compatible = "qcom,rpm-ipq6018";
+- qcom,glink-channels = "rpm_requests";
+-
+- regulators {
+- compatible = "qcom,rpm-mp5496-regulators";
+-
+- ipq6018_s2: s2 {
+- regulator-min-microvolt = <725000>;
+- regulator-max-microvolt = <1062500>;
+- regulator-always-on;
+- };
+- };
+- };
+- };
+-
+ smem {
+ compatible = "qcom,smem";
+ memory-region = <&smem_region>;
diff --git a/target/linux/qualcommax/patches-6.1/0135-arm64-dts-qcom-ipq6018-include-the-GPLL0-as-clock-pr.patch b/target/linux/qualcommax/patches-6.1/0052-v6.7-arm64-dts-qcom-ipq6018-include-the-GPLL0-as.patch
similarity index 54%
rename from target/linux/qualcommax/patches-6.1/0135-arm64-dts-qcom-ipq6018-include-the-GPLL0-as-clock-pr.patch
rename to target/linux/qualcommax/patches-6.1/0052-v6.7-arm64-dts-qcom-ipq6018-include-the-GPLL0-as.patch
index bfa04cd02d..b70d7bf69c 100644
--- a/target/linux/qualcommax/patches-6.1/0135-arm64-dts-qcom-ipq6018-include-the-GPLL0-as-clock-pr.patch
+++ b/target/linux/qualcommax/patches-6.1/0052-v6.7-arm64-dts-qcom-ipq6018-include-the-GPLL0-as.patch
@@ -1,25 +1,28 @@
-From a120815200adaf3ac28ccf3a1813c78b4be02cc4 Mon Sep 17 00:00:00 2001
+From 0133c7af3aa0420778d106cb90db708cfa45f2c6 Mon Sep 17 00:00:00 2001
From: Kathiravan Thirumoorthy <quic_kathirav at quicinc.com>
Date: Thu, 14 Sep 2023 12:29:59 +0530
Subject: [PATCH] arm64: dts: qcom: ipq6018: include the GPLL0 as clock
provider for mailbox
-While the kernel is booting up, APSS PLL will be running at 800MHz with
-GPLL0 as source. Once the cpufreq driver is available, APSS PLL will be
-configured to the rate based on the opp table and the source also will
-be changed to APSS_PLL_EARLY. So allow the mailbox to consume the GPLL0,
-with this inclusion, CPU Freq correctly reports that CPU is running at
-800MHz rather than 24MHz.
+While the kernel is booting up, APSS clock / CPU clock will be running
+at 800MHz with GPLL0 as source. Once the cpufreq driver is available,
+APSS PLL will be configured to the rate based on the opp table and the
+source also will be changed to APSS_PLL_EARLY. So allow the mailbox to
+consume the GPLL0, with this inclusion, CPU Freq correctly reports that
+CPU is running at 800MHz rather than 24MHz.
Signed-off-by: Kathiravan Thirumoorthy <quic_kathirav at quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio at linaro.org>
+Link: https://lore.kernel.org/r/20230913-gpll_cleanup-v2-9-c8ceb1a37680@quicinc.com
+[bjorn: Updated commit message, as requested by Kathiravan]
+Signed-off-by: Bjorn Andersson <andersson at kernel.org>
---
arch/arm64/boot/dts/qcom/ipq6018.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
-@@ -504,8 +504,8 @@
+@@ -618,8 +618,8 @@
compatible = "qcom,ipq6018-apcs-apps-global";
reg = <0x0 0x0b111000 0x0 0x1000>;
#clock-cells = <1>;
diff --git a/target/linux/qualcommax/patches-6.1/0053-v6.7-clk-qcom-gcc-ipq6018-add-QUP6-I2C-clock.patch b/target/linux/qualcommax/patches-6.1/0053-v6.7-clk-qcom-gcc-ipq6018-add-QUP6-I2C-clock.patch
new file mode 100644
index 0000000000..0858528933
--- /dev/null
+++ b/target/linux/qualcommax/patches-6.1/0053-v6.7-clk-qcom-gcc-ipq6018-add-QUP6-I2C-clock.patch
@@ -0,0 +1,57 @@
+From 3dcf7b59393812a5fbd83f8cd8d34b94afb4c4d1 Mon Sep 17 00:00:00 2001
+From: Robert Marko <robimarko at gmail.com>
+Date: Sat, 21 Oct 2023 13:55:18 +0200
+Subject: [PATCH] clk: qcom: gcc-ipq6018: add QUP6 I2C clock
+
+QUP6 I2C clock is listed in the dt bindings but it was never included in
+the GCC driver.
+So lets add support for it, it is marked as criticial as it is used by RPM
+to communicate to the external PMIC over I2C so this clock must not be
+disabled.
+
+Signed-off-by: Robert Marko <robimarko at gmail.com>
+Reviewed-by: Kathiravan Thirumoorthy <quic_kathirav at quicinc.com>
+Reviewed-by: Konrad Dybcio <konrad.dybcio at linaro.org>
+Link: https://lore.kernel.org/r/20231021115545.229060-1-robimarko@gmail.com
+Signed-off-by: Bjorn Andersson <andersson at kernel.org>
+---
+ drivers/clk/qcom/gcc-ipq6018.c | 21 +++++++++++++++++++++
+ 1 file changed, 21 insertions(+)
+
+--- a/drivers/clk/qcom/gcc-ipq6018.c
++++ b/drivers/clk/qcom/gcc-ipq6018.c
+@@ -2120,6 +2120,26 @@ static struct clk_branch gcc_blsp1_qup5_
+ },
+ };
+
++static struct clk_branch gcc_blsp1_qup6_i2c_apps_clk = {
++ .halt_reg = 0x07010,
++ .clkr = {
++ .enable_reg = 0x07010,
++ .enable_mask = BIT(0),
++ .hw.init = &(struct clk_init_data){
++ .name = "gcc_blsp1_qup6_i2c_apps_clk",
++ .parent_hws = (const struct clk_hw *[]){
++ &blsp1_qup6_i2c_apps_clk_src.clkr.hw },
++ .num_parents = 1,
++ /*
++ * RPM uses QUP6 I2C to communicate with the external
++ * PMIC so it must not be disabled.
++ */
++ .flags = CLK_SET_RATE_PARENT | CLK_IS_CRITICAL,
++ .ops = &clk_branch2_ops,
++ },
++ },
++};
++
+ static struct clk_branch gcc_blsp1_qup6_spi_apps_clk = {
+ .halt_reg = 0x0700c,
+ .clkr = {
+@@ -4276,6 +4296,7 @@ static struct clk_regmap *gcc_ipq6018_cl
+ [GCC_BLSP1_QUP4_SPI_APPS_CLK] = &gcc_blsp1_qup4_spi_apps_clk.clkr,
+ [GCC_BLSP1_QUP5_I2C_APPS_CLK] = &gcc_blsp1_qup5_i2c_apps_clk.clkr,
+ [GCC_BLSP1_QUP5_SPI_APPS_CLK] = &gcc_blsp1_qup5_spi_apps_clk.clkr,
++ [GCC_BLSP1_QUP6_I2C_APPS_CLK] = &gcc_blsp1_qup6_i2c_apps_clk.clkr,
+ [GCC_BLSP1_QUP6_SPI_APPS_CLK] = &gcc_blsp1_qup6_spi_apps_clk.clkr,
+ [GCC_BLSP1_UART1_APPS_CLK] = &gcc_blsp1_uart1_apps_clk.clkr,
+ [GCC_BLSP1_UART2_APPS_CLK] = &gcc_blsp1_uart2_apps_clk.clkr,
diff --git a/target/linux/qualcommax/patches-6.1/0142-arm64-dts-qcom-ipq6018-use-CPUFreq-NVMEM.patch b/target/linux/qualcommax/patches-6.1/0054-v6.8-arm64-dts-qcom-ipq6018-use-CPUFreq-NVMEM.patch
similarity index 96%
rename from target/linux/qualcommax/patches-6.1/0142-arm64-dts-qcom-ipq6018-use-CPUFreq-NVMEM.patch
rename to target/linux/qualcommax/patches-6.1/0054-v6.8-arm64-dts-qcom-ipq6018-use-CPUFreq-NVMEM.patch
index 0eb21a4f90..1369a90a8a 100644
--- a/target/linux/qualcommax/patches-6.1/0142-arm64-dts-qcom-ipq6018-use-CPUFreq-NVMEM.patch
+++ b/target/linux/qualcommax/patches-6.1/0054-v6.8-arm64-dts-qcom-ipq6018-use-CPUFreq-NVMEM.patch
@@ -20,7 +20,7 @@ Signed-off-by: Bjorn Andersson <andersson at kernel.org>
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
-@@ -93,37 +93,49 @@
+@@ -95,42 +95,49 @@
};
cpu_opp_table: opp-table-cpu {
@@ -35,35 +35,35 @@ Signed-off-by: Bjorn Andersson <andersson at kernel.org>
+ opp-supported-hw = <0xf>;
clock-latency-ns = <200000>;
};
-+
+
opp-1056000000 {
opp-hz = /bits/ 64 <1056000000>;
opp-microvolt = <787500>;
+ opp-supported-hw = <0xf>;
clock-latency-ns = <200000>;
};
-+
+
opp-1320000000 {
opp-hz = /bits/ 64 <1320000000>;
opp-microvolt = <862500>;
+ opp-supported-hw = <0x3>;
clock-latency-ns = <200000>;
};
-+
+
opp-1440000000 {
opp-hz = /bits/ 64 <1440000000>;
opp-microvolt = <925000>;
+ opp-supported-hw = <0x3>;
clock-latency-ns = <200000>;
};
-+
+
opp-1608000000 {
opp-hz = /bits/ 64 <1608000000>;
opp-microvolt = <987500>;
+ opp-supported-hw = <0x1>;
clock-latency-ns = <200000>;
};
-+
+
opp-1800000000 {
opp-hz = /bits/ 64 <1800000000>;
opp-microvolt = <1062500>;
@@ -71,7 +71,7 @@ Signed-off-by: Bjorn Andersson <andersson at kernel.org>
clock-latency-ns = <200000>;
};
};
-@@ -189,6 +201,11 @@
+@@ -321,6 +328,11 @@
reg = <0x0 0x000a4000 0x0 0x2000>;
#address-cells = <1>;
#size-cells = <1>;
@@ -82,4 +82,4 @@ Signed-off-by: Bjorn Andersson <andersson at kernel.org>
+ };
};
- prng: qrng at e1000 {
+ prng: qrng at e3000 {
diff --git a/target/linux/qualcommax/patches-6.1/0055-v6.8-arm64-dts-ipq6018-Add-remaining-QUP-UART-node.patch b/target/linux/qualcommax/patches-6.1/0055-v6.8-arm64-dts-ipq6018-Add-remaining-QUP-UART-node.patch
new file mode 100644
index 0000000000..ca3c896047
--- /dev/null
+++ b/target/linux/qualcommax/patches-6.1/0055-v6.8-arm64-dts-ipq6018-Add-remaining-QUP-UART-node.patch
@@ -0,0 +1,81 @@
+From e6c32770ef83f3e8cc057f3920b1c06aa9d1c9c2 Mon Sep 17 00:00:00 2001
+From: Chukun Pan <amadeus at jmu.edu.cn>
+Date: Sun, 3 Dec 2023 23:39:14 +0800
+Subject: [PATCH] arm64: dts: qcom: ipq6018: Add remaining QUP UART node
+
+Add node to support all the QUP UART node controller inside of IPQ6018.
+Some routers use these bus to connect Bluetooth chips.
+
+Signed-off-by: Chukun Pan <amadeus at jmu.edu.cn>
+Link: https://lore.kernel.org/r/20231203153914.532654-1-amadeus@jmu.edu.cn
+Signed-off-by: Bjorn Andersson <andersson at kernel.org>
+---
+ arch/arm64/boot/dts/qcom/ipq6018.dtsi | 50 +++++++++++++++++++++++++++
+ 1 file changed, 50 insertions(+)
+
+--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
++++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+@@ -458,6 +458,26 @@
+ qcom,ee = <0>;
+ };
+
++ blsp1_uart1: serial at 78af000 {
++ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
++ reg = <0x0 0x78af000 0x0 0x200>;
++ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
++ <&gcc GCC_BLSP1_AHB_CLK>;
++ clock-names = "core", "iface";
++ status = "disabled";
++ };
++
++ blsp1_uart2: serial at 78b0000 {
++ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
++ reg = <0x0 0x78b0000 0x0 0x200>;
++ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
++ <&gcc GCC_BLSP1_AHB_CLK>;
++ clock-names = "core", "iface";
++ status = "disabled";
++ };
++
+ blsp1_uart3: serial at 78b1000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0x0 0x078b1000 0x0 0x200>;
+@@ -466,6 +486,36 @@
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
++ };
++
++ blsp1_uart4: serial at 78b2000 {
++ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
++ reg = <0x0 0x078b2000 0x0 0x200>;
++ interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&gcc GCC_BLSP1_UART4_APPS_CLK>,
++ <&gcc GCC_BLSP1_AHB_CLK>;
++ clock-names = "core", "iface";
++ status = "disabled";
++ };
++
++ blsp1_uart5: serial at 78b3000 {
++ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
++ reg = <0x0 0x78b3000 0x0 0x200>;
++ interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&gcc GCC_BLSP1_UART5_APPS_CLK>,
++ <&gcc GCC_BLSP1_AHB_CLK>;
++ clock-names = "core", "iface";
++ status = "disabled";
++ };
++
++ blsp1_uart6: serial at 78b4000 {
++ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
++ reg = <0x0 0x078b4000 0x0 0x200>;
++ interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&gcc GCC_BLSP1_UART6_APPS_CLK>,
++ <&gcc GCC_BLSP1_AHB_CLK>;
++ clock-names = "core", "iface";
++ status = "disabled";
+ };
+
+ blsp1_spi1: spi at 78b5000 {
diff --git a/target/linux/qualcommax/patches-6.1/0056-v6.9-arm64-dts-qcom-Fix-hs_phy_irq-for-QUSB2-targets.patch b/target/linux/qualcommax/patches-6.1/0056-v6.9-arm64-dts-qcom-Fix-hs_phy_irq-for-QUSB2-targets.patch
new file mode 100644
index 0000000000..0f1b3e6a38
--- /dev/null
+++ b/target/linux/qualcommax/patches-6.1/0056-v6.9-arm64-dts-qcom-Fix-hs_phy_irq-for-QUSB2-targets.patch
@@ -0,0 +1,95 @@
+From 2c6597c72e9722ac020102d5af40126df0437b82 Mon Sep 17 00:00:00 2001
+From: Krishna Kurapati <quic_kriskura at quicinc.com>
+Date: Fri, 26 Jan 2024 00:29:18 +0530
+Subject: [PATCH] arm64: dts: qcom: Fix hs_phy_irq for QUSB2 targets
+
+On several QUSB2 Targets, the hs_phy_irq mentioned is actually
+qusb2_phy interrupt specific to QUSB2 PHY's. Rename hs_phy_irq
+to qusb2_phy for such targets.
+
+In actuality, the hs_phy_irq is also present in these targets, but
+kept in for debug purposes in hw test environments. This is not
+triggered by default and its functionality is mutually exclusive
+to that of qusb2_phy interrupt.
+
+Add missing hs_phy_irq's, pwr_event irq's for QUSB2 PHY targets.
+Add missing ss_phy_irq on some targets which allows for remote
+wakeup to work on a Super Speed link.
+
+Also modify order of interrupts in accordance to bindings update.
+Since driver looks up for interrupts by name and not by index, it
+is safe to modify order of these interrupts in the DT.
+
+Signed-off-by: Krishna Kurapati <quic_kriskura at quicinc.com>
+Link: https://lore.kernel.org/r/20240125185921.5062-2-quic_kriskura@quicinc.com
+Signed-off-by: Bjorn Andersson <andersson at kernel.org>
+---
+ arch/arm64/boot/dts/qcom/ipq6018.dtsi | 13 +++++++++++++
+ arch/arm64/boot/dts/qcom/ipq8074.dtsi | 14 ++++++++++++++
+ arch/arm64/boot/dts/qcom/msm8953.dtsi | 7 +++++--
+ arch/arm64/boot/dts/qcom/msm8996.dtsi | 8 ++++++--
+ arch/arm64/boot/dts/qcom/msm8998.dtsi | 7 +++++--
+ arch/arm64/boot/dts/qcom/sdm630.dtsi | 17 +++++++++++++----
+ arch/arm64/boot/dts/qcom/sm6115.dtsi | 9 +++++++--
+ arch/arm64/boot/dts/qcom/sm6125.dtsi | 9 +++++++--
+ 8 files changed, 70 insertions(+), 14 deletions(-)
+
+--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
++++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+@@ -430,6 +430,12 @@
+ <&gcc GCC_USB1_MOCK_UTMI_CLK>;
+ assigned-clock-rates = <133330000>,
+ <24000000>;
++
++ interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
++ <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
++ interrupt-names = "pwr_event",
++ "qusb2_phy";
++
+ resets = <&gcc GCC_USB1_BCR>;
+ status = "disabled";
+
+@@ -628,6 +634,13 @@
+ <133330000>,
+ <24000000>;
+
++ interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
++ <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
++ <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
++ interrupt-names = "pwr_event",
++ "qusb2_phy",
++ "ss_phy_irq";
++
+ resets = <&gcc GCC_USB0_BCR>;
+ status = "disabled";
+
+--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+@@ -611,6 +611,13 @@
+ <133330000>,
+ <19200000>;
+
++ interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
++ <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
++ <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
++ interrupt-names = "pwr_event",
++ "qusb2_phy",
++ "ss_phy_irq";
++
+ power-domains = <&gcc USB0_GDSC>;
+
+ resets = <&gcc GCC_USB0_BCR>;
+@@ -653,6 +660,13 @@
+ <133330000>,
+ <19200000>;
+
++ interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
++ <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
++ <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
++ interrupt-names = "pwr_event",
++ "qusb2_phy",
++ "ss_phy_irq";
++
+ power-domains = <&gcc USB1_GDSC>;
+
+ resets = <&gcc GCC_USB1_BCR>;
diff --git a/target/linux/qualcommax/patches-6.1/0138-hwspinlock-qcom-Remove-IPQ6018-SOC-specific-compatib.patch b/target/linux/qualcommax/patches-6.1/0057-v6.8-hwspinlock-qcom-Remove-IPQ6018-SOC-specific-.patch
similarity index 80%
rename from target/linux/qualcommax/patches-6.1/0138-hwspinlock-qcom-Remove-IPQ6018-SOC-specific-compatib.patch
rename to target/linux/qualcommax/patches-6.1/0057-v6.8-hwspinlock-qcom-Remove-IPQ6018-SOC-specific-.patch
index 21e60c6327..25d56870a4 100644
--- a/target/linux/qualcommax/patches-6.1/0138-hwspinlock-qcom-Remove-IPQ6018-SOC-specific-compatib.patch
+++ b/target/linux/qualcommax/patches-6.1/0057-v6.8-hwspinlock-qcom-Remove-IPQ6018-SOC-specific-.patch
@@ -1,7 +1,7 @@
-From a120815200adaf3ac28ccf3a1813c78b4be02cc4 Mon Sep 17 00:00:00 2001
+From c3dc3d079d191c9149496b3c7fe1ece909386d93 Mon Sep 17 00:00:00 2001
From: Vignesh Viswanathan <quic_viswanat at quicinc.com>
Date: Tue, 5 Sep 2023 15:25:35 +0530
-Subject: [PATCH v2 2/2] hwspinlock: qcom: Remove IPQ6018 SOC specific compatible
+Subject: [PATCH] hwspinlock: qcom: Remove IPQ6018 SOC specific compatible
IPQ6018 has 32 tcsr_mutex hwlock registers with stride 0x1000.
The compatible string qcom,ipq6018-tcsr-mutex is mapped to
@@ -11,13 +11,11 @@ and doesn't match the HW present in IPQ6018.
Remove IPQ6018 specific compatible string so that it fallsback to
of_tcsr_mutex data which maps to the correct configuration for IPQ6018.
-Changes in v2:
- - Updated commit message
- - Added Fixes and stable tags
-
-Cc: stable at vger.kernel.org
Fixes: 5d4753f741d8 ("hwspinlock: qcom: add support for MMIO on older SoCs")
Signed-off-by: Vignesh Viswanathan <quic_viswanat at quicinc.com>
+Reviewed-by: Konrad Dybcio <konrad.dybcio at linaro.org>
+Link: https://lore.kernel.org/r/20230905095535.1263113-3-quic_viswanat@quicinc.com
+Signed-off-by: Bjorn Andersson <andersson at kernel.org>
---
drivers/hwspinlock/qcom_hwspinlock.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/target/linux/qualcommax/patches-6.1/0140-arm64-dts-qcom-ipq6018-add-tsens-node.patch b/target/linux/qualcommax/patches-6.1/0058-v6.9-arm64-dts-qcom-ipq6018-add-tsens-node.patch
similarity index 72%
rename from target/linux/qualcommax/patches-6.1/0140-arm64-dts-qcom-ipq6018-add-tsens-node.patch
rename to target/linux/qualcommax/patches-6.1/0058-v6.9-arm64-dts-qcom-ipq6018-add-tsens-node.patch
index f3fa4fe6c8..9de90e4da6 100644
--- a/target/linux/qualcommax/patches-6.1/0140-arm64-dts-qcom-ipq6018-add-tsens-node.patch
+++ b/target/linux/qualcommax/patches-6.1/0058-v6.9-arm64-dts-qcom-ipq6018-add-tsens-node.patch
@@ -1,19 +1,21 @@
-From 946b1a565a60a04f8e5171a79a463f99485a3531 Mon Sep 17 00:00:00 2001
+From 0b17197055b528da22e9385200e61b847b499d48 Mon Sep 17 00:00:00 2001
From: Mantas Pucka <mantas at 8devices.com>
-Date: Wed, 24 Jan 2024 15:07:24 +0200
-Subject: [PATCH 2/3] arm64: dts: qcom: ipq6018: add tsens node
+Date: Thu, 25 Jan 2024 11:04:11 +0200
+Subject: [PATCH] arm64: dts: qcom: ipq6018: add tsens node
IPQ6018 has temperature sensing HW block compatible with IPQ8074. Add
node for it.
Signed-off-by: Mantas Pucka <mantas at 8devices.com>
+Link: https://lore.kernel.org/r/1706173452-1017-3-git-send-email-mantas@8devices.com
+Signed-off-by: Bjorn Andersson <andersson at kernel.org>
---
arch/arm64/boot/dts/qcom/ipq6018.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
-@@ -193,6 +193,16 @@
+@@ -342,6 +342,16 @@
clock-names = "core";
};
diff --git a/target/linux/qualcommax/patches-6.1/0141-arm64-dts-qcom-ipq6018-add-thermal-zones.patch b/target/linux/qualcommax/patches-6.1/0059-v6.9-arm64-dts-qcom-ipq6018-add-thermal-zones.patch
similarity index 88%
rename from target/linux/qualcommax/patches-6.1/0141-arm64-dts-qcom-ipq6018-add-thermal-zones.patch
rename to target/linux/qualcommax/patches-6.1/0059-v6.9-arm64-dts-qcom-ipq6018-add-thermal-zones.patch
index 9b4ab43b62..dab433348a 100644
--- a/target/linux/qualcommax/patches-6.1/0141-arm64-dts-qcom-ipq6018-add-thermal-zones.patch
+++ b/target/linux/qualcommax/patches-6.1/0059-v6.9-arm64-dts-qcom-ipq6018-add-thermal-zones.patch
@@ -1,14 +1,16 @@
-From 92c65f959ec2b8d1ab26efe246b29ed538b45c86 Mon Sep 17 00:00:00 2001
+From 8f053e5616352943e16966f195f5a7a161e6fe7d Mon Sep 17 00:00:00 2001
From: Mantas Pucka <mantas at 8devices.com>
-Date: Wed, 24 Jan 2024 15:10:43 +0200
-Subject: [PATCH 3/3] arm64: dts: qcom: ipq6018: add thermal zones
+Date: Thu, 25 Jan 2024 11:04:12 +0200
+Subject: [PATCH] arm64: dts: qcom: ipq6018: add thermal zones
Add thermal zones to make use of thermal sensors data. For CPU zone,
add cooling device that uses CPU frequency scaling.
Signed-off-by: Mantas Pucka <mantas at 8devices.com>
+Link: https://lore.kernel.org/r/1706173452-1017-4-git-send-email-mantas@8devices.com
+Signed-off-by: Bjorn Andersson <andersson at kernel.org>
---
- arch/arm64/boot/dts/qcom/ipq6018.dtsi | 121 ++++++++++++++++++++++++++++++++++
+ arch/arm64/boot/dts/qcom/ipq6018.dtsi | 121 ++++++++++++++++++++++++++
1 file changed, 121 insertions(+)
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -53,11 +55,10 @@ Signed-off-by: Mantas Pucka <mantas at 8devices.com>
};
L2_0: l2-cache {
-@@ -808,6 +813,122 @@
- };
+@@ -888,6 +893,122 @@
};
};
-+
+
+ thermal-zones {
+ nss-top-thermal {
+ polling-delay-passive = <250>;
@@ -173,6 +174,7 @@ Signed-off-by: Mantas Pucka <mantas at 8devices.com>
+ };
+ };
+ };
-
- wcss: wcss-smp2p {
- compatible = "qcom,smp2p";
++
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
diff --git a/target/linux/qualcommax/patches-6.1/0036-v6.9-clk-qcom-gcc-ipq6018-add-qdss_at-clock-needed-for-wi.patch b/target/linux/qualcommax/patches-6.1/0060-v6.9-clk-qcom-gcc-ipq6018-add-qdss_at-clock-needed-for-wi.patch
similarity index 92%
rename from target/linux/qualcommax/patches-6.1/0036-v6.9-clk-qcom-gcc-ipq6018-add-qdss_at-clock-needed-for-wi.patch
rename to target/linux/qualcommax/patches-6.1/0060-v6.9-clk-qcom-gcc-ipq6018-add-qdss_at-clock-needed-for-wi.patch
index bbe8b19c46..e72d1180c5 100644
--- a/target/linux/qualcommax/patches-6.1/0036-v6.9-clk-qcom-gcc-ipq6018-add-qdss_at-clock-needed-for-wi.patch
+++ b/target/linux/qualcommax/patches-6.1/0060-v6.9-clk-qcom-gcc-ipq6018-add-qdss_at-clock-needed-for-wi.patch
@@ -17,7 +17,7 @@ Signed-off-by: Bjorn Andersson <andersson at kernel.org>
--- a/drivers/clk/qcom/gcc-ipq6018.c
+++ b/drivers/clk/qcom/gcc-ipq6018.c
-@@ -3503,6 +3503,22 @@ static struct clk_branch gcc_prng_ahb_cl
+@@ -3523,6 +3523,22 @@ static struct clk_branch gcc_prng_ahb_cl
},
};
@@ -40,7 +40,7 @@ Signed-off-by: Bjorn Andersson <andersson at kernel.org>
static struct clk_branch gcc_qdss_dap_clk = {
.halt_reg = 0x29084,
.clkr = {
-@@ -4341,6 +4357,7 @@ static struct clk_regmap *gcc_ipq6018_cl
+@@ -4362,6 +4378,7 @@ static struct clk_regmap *gcc_ipq6018_cl
[GCC_SYS_NOC_PCIE0_AXI_CLK] = &gcc_sys_noc_pcie0_axi_clk.clkr,
[GCC_PCIE0_PIPE_CLK] = &gcc_pcie0_pipe_clk.clkr,
[GCC_PRNG_AHB_CLK] = &gcc_prng_ahb_clk.clkr,
diff --git a/target/linux/qualcommax/patches-6.1/0035-v6.9-phy-qcom-qmp-usb-fix-serdes-init-sequence-for-IPQ601.patch b/target/linux/qualcommax/patches-6.1/0061-v6.8-phy-qcom-qmp-usb-fix-serdes-init-sequence-for-IPQ6018.patch
similarity index 100%
rename from target/linux/qualcommax/patches-6.1/0035-v6.9-phy-qcom-qmp-usb-fix-serdes-init-sequence-for-IPQ601.patch
rename to target/linux/qualcommax/patches-6.1/0061-v6.8-phy-qcom-qmp-usb-fix-serdes-init-sequence-for-IPQ6018.patch
diff --git a/target/linux/qualcommax/patches-6.1/0102-arm64-dts-ipq8074-add-reserved-memory-nodes.patch b/target/linux/qualcommax/patches-6.1/0102-arm64-dts-ipq8074-add-reserved-memory-nodes.patch
index af53c077ff..3996d15d9d 100644
--- a/target/linux/qualcommax/patches-6.1/0102-arm64-dts-ipq8074-add-reserved-memory-nodes.patch
+++ b/target/linux/qualcommax/patches-6.1/0102-arm64-dts-ipq8074-add-reserved-memory-nodes.patch
@@ -19,7 +19,7 @@ Signed-off-by: Robert Marko <robimarko at gmail.com>
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-@@ -85,6 +85,26 @@
+@@ -85,6 +85,16 @@
#size-cells = <2>;
ranges;
@@ -33,22 +33,12 @@ Signed-off-by: Robert Marko <robimarko at gmail.com>
+ reg = <0x0 0x4a400000 0x0 0x00200000>;
+ };
+
-+ uboot at 4a600000 {
-+ no-map;
-+ reg = <0x0 0x4a600000 0x0 0x00400000>;
-+ };
-+
-+ sbl at 4aa00000 {
-+ no-map;
-+ reg = <0x0 0x4aa00000 0x0 0x00100000>;
-+ };
-+
- smem at 4ab00000 {
- compatible = "qcom,smem";
- reg = <0x0 0x4ab00000 0x0 0x00100000>;
-@@ -97,6 +117,21 @@
+ bootloader at 4a600000 {
+ reg = <0x0 0x4a600000 0x0 0x400000>;
+ no-map;
+@@ -107,6 +117,21 @@
+ reg = <0x0 0x4ac00000 0x0 0x400000>;
no-map;
- reg = <0x0 0x4ac00000 0x0 0x00400000>;
};
+
+ q6_region: wcnss at 4b000000 {
diff --git a/target/linux/qualcommax/patches-6.1/0110-arm64-dts-qcom-ipq8074-pass-QMP-PCI-PHY-PIPE-clocks-.patch b/target/linux/qualcommax/patches-6.1/0110-arm64-dts-qcom-ipq8074-pass-QMP-PCI-PHY-PIPE-clocks-.patch
index 4bd0d9298f..fd97663513 100644
--- a/target/linux/qualcommax/patches-6.1/0110-arm64-dts-qcom-ipq8074-pass-QMP-PCI-PHY-PIPE-clocks-.patch
+++ b/target/linux/qualcommax/patches-6.1/0110-arm64-dts-qcom-ipq8074-pass-QMP-PCI-PHY-PIPE-clocks-.patch
@@ -17,7 +17,7 @@ Signed-off-by: Robert Marko <robimarko at gmail.com>
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-@@ -398,8 +398,8 @@
+@@ -399,8 +399,8 @@
gcc: gcc at 1800000 {
compatible = "qcom,gcc-ipq8074";
reg = <0x01800000 0x80000>;
diff --git a/target/linux/qualcommax/patches-6.1/0111-arm64-dts-qcom-ipq8074-use-msi-parent-for-PCIe.patch b/target/linux/qualcommax/patches-6.1/0111-arm64-dts-qcom-ipq8074-use-msi-parent-for-PCIe.patch
index 2aedbd7028..30cc69fceb 100644
--- a/target/linux/qualcommax/patches-6.1/0111-arm64-dts-qcom-ipq8074-use-msi-parent-for-PCIe.patch
+++ b/target/linux/qualcommax/patches-6.1/0111-arm64-dts-qcom-ipq8074-use-msi-parent-for-PCIe.patch
@@ -12,7 +12,7 @@ Signed-off-by: Robert Marko <robimarko at gmail.com>
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-@@ -701,7 +701,7 @@
+@@ -720,7 +720,7 @@
reg = <0x0b000000 0x1000>, <0x0b002000 0x1000>;
ranges = <0 0xb00a000 0xffd>;
@@ -21,7 +21,7 @@ Signed-off-by: Robert Marko <robimarko at gmail.com>
compatible = "arm,gic-v2m-frame";
msi-controller;
reg = <0x0 0xffd>;
-@@ -813,8 +813,7 @@
+@@ -833,8 +833,7 @@
ranges = <0x81000000 0x0 0x00000000 0x10200000 0x0 0x10000>, /* I/O */
<0x82000000 0x0 0x10220000 0x10220000 0x0 0xfde0000>; /* MEM */
@@ -31,7 +31,7 @@ Signed-off-by: Robert Marko <robimarko at gmail.com>
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
interrupt-map = <0 0 0 1 &intc 0 142
-@@ -875,8 +874,7 @@
+@@ -895,8 +894,7 @@
ranges = <0x81000000 0x0 0x00000000 0x20200000 0x0 0x10000>, /* I/O */
<0x82000000 0x0 0x20220000 0x20220000 0x0 0xfde0000>; /* MEM */
diff --git a/target/linux/qualcommax/patches-6.1/0120-arm64-dts-qcom-Enable-Q6v5-WCSS-for-ipq8074-SoC.patch b/target/linux/qualcommax/patches-6.1/0120-arm64-dts-qcom-Enable-Q6v5-WCSS-for-ipq8074-SoC.patch
index f5f93d389e..3d92386bb1 100644
--- a/target/linux/qualcommax/patches-6.1/0120-arm64-dts-qcom-Enable-Q6v5-WCSS-for-ipq8074-SoC.patch
+++ b/target/linux/qualcommax/patches-6.1/0120-arm64-dts-qcom-Enable-Q6v5-WCSS-for-ipq8074-SoC.patch
@@ -16,7 +16,7 @@ Signed-off-by: Robert Marko <robimarko at gmail.com>
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-@@ -140,6 +140,32 @@
+@@ -141,6 +141,32 @@
};
};
@@ -49,8 +49,8 @@ Signed-off-by: Robert Marko <robimarko at gmail.com>
soc: soc {
#address-cells = <0x1>;
#size-cells = <0x1>;
-@@ -411,6 +437,11 @@
- #hwlock-cells = <1>;
+@@ -417,6 +443,11 @@
+ reg = <0x01937000 0x21000>;
};
+ tcsr_q6: syscon at 1945000 {
@@ -61,7 +61,7 @@ Signed-off-by: Robert Marko <robimarko at gmail.com>
spmi_bus: spmi at 200f000 {
compatible = "qcom,spmi-pmic-arb";
reg = <0x0200f000 0x001000>,
-@@ -915,6 +946,56 @@
+@@ -935,6 +966,56 @@
"axi_s_sticky";
status = "disabled";
};
diff --git a/target/linux/qualcommax/patches-6.1/0121-arm64-dts-ipq8074-Add-WLAN-node.patch b/target/linux/qualcommax/patches-6.1/0121-arm64-dts-ipq8074-Add-WLAN-node.patch
index 1aaa187d8a..299adb5ff8 100644
--- a/target/linux/qualcommax/patches-6.1/0121-arm64-dts-ipq8074-Add-WLAN-node.patch
+++ b/target/linux/qualcommax/patches-6.1/0121-arm64-dts-ipq8074-Add-WLAN-node.patch
@@ -15,7 +15,7 @@ Signed-off-by: Robert Marko <robimarko at gmail.com>
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-@@ -996,6 +996,117 @@
+@@ -1016,6 +1016,117 @@
};
};
};
diff --git a/target/linux/qualcommax/patches-6.1/0129-arm64-dts-qcom-ipq8074-add-QFPROM-fuses.patch b/target/linux/qualcommax/patches-6.1/0129-arm64-dts-qcom-ipq8074-add-QFPROM-fuses.patch
index 5776ab1af7..8ec4660123 100644
--- a/target/linux/qualcommax/patches-6.1/0129-arm64-dts-qcom-ipq8074-add-QFPROM-fuses.patch
+++ b/target/linux/qualcommax/patches-6.1/0129-arm64-dts-qcom-ipq8074-add-QFPROM-fuses.patch
@@ -12,7 +12,7 @@ Signed-off-by: Robert Marko <robimarko at gmail.com>
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-@@ -342,6 +342,113 @@
+@@ -343,6 +343,113 @@
status = "disabled";
};
diff --git a/target/linux/qualcommax/patches-6.1/0137-arm64-dts-qcom-ipq6018-add-SDHCI-node.patch b/target/linux/qualcommax/patches-6.1/0137-arm64-dts-qcom-ipq6018-add-SDHCI-node.patch
index 329c83a653..bfca74ba76 100644
--- a/target/linux/qualcommax/patches-6.1/0137-arm64-dts-qcom-ipq6018-add-SDHCI-node.patch
+++ b/target/linux/qualcommax/patches-6.1/0137-arm64-dts-qcom-ipq6018-add-SDHCI-node.patch
@@ -13,8 +13,8 @@ Tested-by: Robert Marko <robimarko at gmail.com>
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
-@@ -264,6 +264,29 @@
- reg = <0x0 0x01937000 0x0 0x21000>;
+@@ -469,6 +469,29 @@
+ };
};
+ sdhc_1: mmc at 7804000 {
diff --git a/target/linux/qualcommax/patches-6.1/0139-arm64-dts-qcom-ipq6018-add-LDOA2-regulator.patch b/target/linux/qualcommax/patches-6.1/0139-arm64-dts-qcom-ipq6018-add-LDOA2-regulator.patch
index 6549211689..8889db97f9 100644
--- a/target/linux/qualcommax/patches-6.1/0139-arm64-dts-qcom-ipq6018-add-LDOA2-regulator.patch
+++ b/target/linux/qualcommax/patches-6.1/0139-arm64-dts-qcom-ipq6018-add-LDOA2-regulator.patch
@@ -13,15 +13,15 @@ Signed-off-by: Chukun Pan <amadeus at jmu.edu.cn>
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
-@@ -841,6 +841,11 @@
- regulator-max-microvolt = <1062500>;
- regulator-always-on;
- };
+@@ -178,6 +178,11 @@
+ regulator-max-microvolt = <1062500>;
+ regulator-always-on;
+ };
+
-+ ipq6018_l2: l2 {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <3300000>;
-+ };
++ ipq6018_l2: l2 {
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <3300000>;
++ };
+ };
};
};
- };
diff --git a/target/linux/qualcommax/patches-6.1/0906-arm64-dts-qcom-ipq6018-add-wifi-node.patch b/target/linux/qualcommax/patches-6.1/0906-arm64-dts-qcom-ipq6018-add-wifi-node.patch
index 8c1b7cc6c5..247df110ff 100644
--- a/target/linux/qualcommax/patches-6.1/0906-arm64-dts-qcom-ipq6018-add-wifi-node.patch
+++ b/target/linux/qualcommax/patches-6.1/0906-arm64-dts-qcom-ipq6018-add-wifi-node.patch
@@ -15,7 +15,7 @@ Signed-off-by: Mantas Pucka <mantas at 8devices.com>
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
-@@ -638,6 +638,102 @@
+@@ -807,6 +807,102 @@
};
};
diff --git a/target/linux/qualcommax/patches-6.1/0907-soc-qcom-fix-smp2p-ack-on-ipq6018.patch b/target/linux/qualcommax/patches-6.1/0907-soc-qcom-fix-smp2p-ack-on-ipq6018.patch
index afb2361120..88e294562d 100644
--- a/target/linux/qualcommax/patches-6.1/0907-soc-qcom-fix-smp2p-ack-on-ipq6018.patch
+++ b/target/linux/qualcommax/patches-6.1/0907-soc-qcom-fix-smp2p-ack-on-ipq6018.patch
@@ -15,7 +15,7 @@ Signed-off-by: Mantas Pucka <mantas at 8devices.com>
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
-@@ -1057,6 +1057,7 @@
+@@ -1155,6 +1155,7 @@
wcss_smp2p_out: master-kernel {
qcom,entry-name = "master-kernel";
diff --git a/target/linux/qualcommax/patches-6.1/0909-arm64-dts-qcom-ipq6018-assign-QDSS_AT-clock-to-wifi-.patch b/target/linux/qualcommax/patches-6.1/0909-arm64-dts-qcom-ipq6018-assign-QDSS_AT-clock-to-wifi-.patch
index 5261f3fd96..0a7a100f6a 100644
--- a/target/linux/qualcommax/patches-6.1/0909-arm64-dts-qcom-ipq6018-assign-QDSS_AT-clock-to-wifi-.patch
+++ b/target/linux/qualcommax/patches-6.1/0909-arm64-dts-qcom-ipq6018-assign-QDSS_AT-clock-to-wifi-.patch
@@ -13,7 +13,7 @@ Signed-off-by: Mantas Pucka <mantas at 8devices.com>
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
-@@ -759,8 +759,8 @@
+@@ -928,8 +928,8 @@
"wcss_reset",
"wcss_q6_reset";
diff --git a/target/linux/qualcommax/patches-6.1/0910-arm64-dts-qcom-ipq6018-change-voltage-to-perf-levels.patch b/target/linux/qualcommax/patches-6.1/0910-arm64-dts-qcom-ipq6018-change-voltage-to-perf-levels.patch
index 8d2aff1dca..17784235c3 100644
--- a/target/linux/qualcommax/patches-6.1/0910-arm64-dts-qcom-ipq6018-change-voltage-to-perf-levels.patch
+++ b/target/linux/qualcommax/patches-6.1/0910-arm64-dts-qcom-ipq6018-change-voltage-to-perf-levels.patch
@@ -14,7 +14,7 @@ Signed-off-by: Mantas Pucka <mantas at 8devices.com>
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
-@@ -99,42 +99,42 @@
+@@ -106,42 +106,42 @@
opp-864000000 {
opp-hz = /bits/ 64 <864000000>;
More information about the lede-commits
mailing list