[openwrt/openwrt] qualcommax: ipq807x: 301w: correct PHY mode for AQR

[LEDE Commits]

robimarko pushed a commit to openwrt/openwrt.git, branch main:
https://git.openwrt.org/b38a1d6c65ddb469981284d5215cb2ec05cbb86f

commit b38a1d6c65ddb469981284d5215cb2ec05cbb86f
Author: Robert Marko <robimarko at gmail.com>
AuthorDate: Sat Feb 17 13:41:36 2024 +0100

    qualcommax: ipq807x: 301w: correct PHY mode for AQR
    
    Interfaces that have AQR-s attached to them are using USXGMII and not just
    the default SGMII.
    This was fine until SSDK added some sanity checking and now on Qnap 301W it
    would fail with:
    [   24.740197] nss-dp 3a001800.dp5 10g-1 (uninitialized): failed to connect to phy device
    [   24.740264] nss-dp: probe of 3a001800.dp5 failed with error -14
    
    So, lets fix 10G AQR ports by declaring the correct PHY mode.
    
    Signed-off-by: Robert Marko <robimarko at gmail.com>
---
 target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-301w.dts | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-301w.dts b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-301w.dts
index 58eefc30ba..081e932b5c 100644
--- a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-301w.dts
+++ b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-301w.dts
@@ -485,12 +485,14 @@
 &dp5 {
 	status = "okay";
 	qcom,mactype = <1>;
+	phy-mode = "usxgmii";
 	phy-handle = <&aqr113c_8>;
 	label = "10g-1";
 };
 
 &dp6_syn {
 	status = "okay";
+	phy-mode = "usxgmii";
 	phy-handle = <&aqr113c_0>;
 	label = "10g-2";
 };