[openwrt/openwrt] mediatek: filogic: add support for Cudy AP3000 Outdoor
LEDE Commits
lede-commits at lists.infradead.org
Sun Aug 25 06:36:32 PDT 2024
hauke pushed a commit to openwrt/openwrt.git, branch main:
https://git.openwrt.org/19d770d7b91aaca1de18281dea0da8616df34c6c
commit 19d770d7b91aaca1de18281dea0da8616df34c6c
Author: Pawel Dembicki <paweldembicki at gmail.com>
AuthorDate: Sun Aug 4 22:47:47 2024 +0200
mediatek: filogic: add support for Cudy AP3000 Outdoor
Hardware highlights:
- MediaTek MT7981 WiSoC
- 256MB DDR3 RAM
- 64MB SPI-NAND
- MediaTek MT7981 2x2 DBDC 802.11ax 2T2R (2.4 / 5)
- 1x LED in two colors
- 2x Button
- 1x 1GbE
- Two detachable antenas, two internal pcb antenas
- PoE powered (standalone)
MAC:
LAN MAC: label mac
2.4G MAC: label mac -1
5G MAC: label mac
How to install:
1. Apply Cudy Intermediate OpenWrt image for AP3000 Outdoor V1
2. Install OpenWrt sysupgrade image
Signed-off-by: Pawel Dembicki <paweldembicki at gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16156
Signed-off-by: Hauke Mehrtens <hauke at hauke-m.de>
---
.../base-files/lib/preinit/05_set_preinit_iface | 1 +
.../mediatek/dts/mt7981b-cudy-ap3000outdoor-v1.dts | 209 +++++++++++++++++++++
.../filogic/base-files/etc/board.d/02_network | 1 +
.../etc/hotplug.d/ieee80211/11_fix_wifi_mac | 1 +
target/linux/mediatek/image/filogic.mk | 17 ++
5 files changed, 229 insertions(+)
diff --git a/target/linux/mediatek/base-files/lib/preinit/05_set_preinit_iface b/target/linux/mediatek/base-files/lib/preinit/05_set_preinit_iface
index 6dfa52c291..8e74c577cd 100644
--- a/target/linux/mediatek/base-files/lib/preinit/05_set_preinit_iface
+++ b/target/linux/mediatek/base-files/lib/preinit/05_set_preinit_iface
@@ -6,6 +6,7 @@ set_preinit_iface() {
ip link set eth1 up
ifname=eth1
;;
+ cudy,ap3000outdoor-v1|\
cudy,re3000-v1|\
ubnt,unifi-6-lr|\
zyxel,nwa50ax-pro)
diff --git a/target/linux/mediatek/dts/mt7981b-cudy-ap3000outdoor-v1.dts b/target/linux/mediatek/dts/mt7981b-cudy-ap3000outdoor-v1.dts
new file mode 100644
index 0000000000..62e4063947
--- /dev/null
+++ b/target/linux/mediatek/dts/mt7981b-cudy-ap3000outdoor-v1.dts
@@ -0,0 +1,209 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+
+#include "mt7981.dtsi"
+
+/ {
+ model = "Cudy AP3000 Outdoor v1";
+ compatible = "cudy,ap3000outdoor-v1", "mediatek,mt7981-spim-snand-rfb";
+
+ aliases {
+ label-mac-device = &gmac1;
+ led-boot = &led_status_green;
+ led-failsafe = &led_status_red;
+ led-running = &led_status_green;
+ led-upgrade = &led_status_red;
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&pio 1 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "wps";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&pio 0 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_status_green: led at 0 {
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&pio 10 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_status_red: led_1 {
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_RED>;
+ gpios = <&pio 11 GPIO_ACTIVE_HIGH>;
+ };
+ };
+ gpio_export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ antctrl {
+ /* Not sure if this pin does anything.
+ * It was taken from GPL sources.
+ * Intermediate image doesn't have it.
+ */
+ gpio-export,name = "antctrl";
+ gpio-export,output = <1>;
+ gpios = <&pio 7 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ watchdog-hw {
+ compatible = "linux,wdt-gpio";
+ gpios = <&pio 6 GPIO_ACTIVE_HIGH>;
+ hw_algo = "level";
+ hw_margin_ms = <10000>;
+ always-running;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&watchdog {
+ status = "okay";
+};
+
+ð {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mdio_pins>;
+
+ status = "okay";
+
+ gmac1: mac at 1 {
+ compatible = "mediatek,eth-mac";
+ reg = <1>;
+ phy-mode = "gmii";
+ phy-handle = <&int_gbe_phy>;
+ nvmem-cell-names = "mac-address";
+ nvmem-cells = <&macaddr_bdinfo_de00 1>;
+ };
+};
+
+&spi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_flash_pins>;
+ status = "okay";
+
+ spi_nand: flash at 0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spi-nand";
+ reg = <0>;
+ spi-max-frequency = <52000000>;
+
+ spi-cal-enable;
+ spi-cal-mode = "read-data";
+ spi-cal-datalen = <7>;
+ spi-cal-data = /bits/ 8 <0x53 0x50 0x49 0x4E 0x41 0x4E 0x44>;
+ spi-cal-addrlen = <5>;
+ spi-cal-addr = /bits/ 32 <0x0 0x0 0x0 0x0 0x0>;
+
+ spi-tx-bus-width = <4>;
+ spi-rx-bus-width = <4>;
+ mediatek,nmbm;
+ mediatek,bmt-max-ratio = <1>;
+ mediatek,bmt-max-reserved-blocks = <64>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition at 0 {
+ label = "BL2";
+ reg = <0x00000 0x0100000>;
+ read-only;
+ };
+
+ partition at 100000 {
+ label = "u-boot-env";
+ reg = <0x0100000 0x0080000>;
+ read-only;
+ };
+
+ factory: partition at 180000 {
+ label = "Factory";
+ reg = <0x180000 0x0200000>;
+ read-only;
+ nvmem-layout {
+ compatible = "fixed-layout";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ eeprom_factory_0: eeprom at 0 {
+ reg = <0x0 0x1000>;
+ };
+ };
+ };
+
+ partition at 380000 {
+ label = "bdinfo";
+ reg = <0x380000 0x0040000>;
+ read-only;
+ nvmem-layout {
+ compatible = "fixed-layout";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_bdinfo_de00: macaddr at de00 {
+ compatible = "mac-base";
+ reg = <0xde00 0x6>;
+ #nvmem-cell-cells = <1>;
+ };
+ };
+
+ };
+
+ partition at 3C0000 {
+ label = "FIP";
+ reg = <0x3C0000 0x0200000>;
+ read-only;
+ };
+
+ partition at 580000 {
+ label = "ubi";
+ reg = <0x5C0000 0x4000000>;
+ compatible = "linux,ubi";
+ };
+ };
+ };
+};
+
+
+&pio {
+ spi0_flash_pins: spi0-pins {
+ mux {
+ function = "spi";
+ groups = "spi0", "spi0_wp_hold";
+ };
+ };
+};
+
+&wifi {
+ status = "okay";
+ nvmem-cells = <&eeprom_factory_0>;
+ nvmem-cell-names = "eeprom";
+};
diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network
index cf48926ad1..abe7682dfb 100644
--- a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network
+++ b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network
@@ -87,6 +87,7 @@ mediatek_setup_interfaces()
mercusys,mr90x-v1)
ucidef_set_interfaces_lan_wan "lan0 lan1 lan2" eth1
;;
+ cudy,ap3000outdoor-v1|\
cudy,re3000-v1|\
netgear,wax220|\
ubnt,unifi-6-plus|\
diff --git a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac
index 1605c0086d..ff9e9f881c 100644
--- a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac
+++ b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac
@@ -75,6 +75,7 @@ case "$board" in
[ "$PHYNBR" = "0" ] && echo "$addr" > /sys${DEVPATH}/macaddress
[ "$PHYNBR" = "1" ] && macaddr_setbit_la $(macaddr_add $addr 1) > /sys${DEVPATH}/macaddress
;;
+ cudy,ap3000outdoor-v1|\
cudy,m3000-v1|\
cudy,wr3000-v1)
addr=$(mtd_get_mac_binary bdinfo 0xde00)
diff --git a/target/linux/mediatek/image/filogic.mk b/target/linux/mediatek/image/filogic.mk
index 40e58f9754..e21794600d 100644
--- a/target/linux/mediatek/image/filogic.mk
+++ b/target/linux/mediatek/image/filogic.mk
@@ -507,6 +507,23 @@ define Device/confiabits_mt7981
endef
TARGET_DEVICES += confiabits_mt7981
+define Device/cudy_ap3000outdoor-v1
+ DEVICE_VENDOR := Cudy
+ DEVICE_MODEL := AP3000 Outdoor
+ DEVICE_VARIANT := v1
+ DEVICE_DTS := mt7981b-cudy-ap3000outdoor-v1
+ DEVICE_DTS_DIR := ../dts
+ SUPPORTED_DEVICES += R51
+ UBINIZE_OPTS := -E 5
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ IMAGE_SIZE := 65536k
+ KERNEL_IN_UBI := 1
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+ DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
+endef
+TARGET_DEVICES += cudy_ap3000outdoor-v1
+
define Device/cudy_m3000-v1
DEVICE_VENDOR := Cudy
DEVICE_MODEL := M3000
More information about the lede-commits
mailing list