[openwrt/openwrt] bmips: add support for TP-Link TD-W8968 V3
LEDE Commits
lede-commits at lists.infradead.org
Sat Aug 24 11:35:52 PDT 2024
noltari pushed a commit to openwrt/openwrt.git, branch main:
https://git.openwrt.org/1d976f83e40c48111892b06f59607f77b4f20eb1
commit 1d976f83e40c48111892b06f59607f77b4f20eb1
Author: Mathesh Velayudan <123v.mathesh at gmail.com>
AuthorDate: Thu Jul 4 17:39:51 2024 +0530
bmips: add support for TP-Link TD-W8968 V3
TP-Link TD-W8968 v3 is an 300Mbps Wireless N USB ADSL2+ Modem Router based on
Broadcom BCM6318 SoC.
Hardware:
CPU: Broadcom BCM6318, 333 MHz, 1 core
Flash: 8MB
RAM: 64 MB
Ethernet: 4x 10/100 Mbps
Wireless: 802.11b/g/n, BCM43217
LEDs/Buttons: 10x / 3x
USB: 1x 2.0
Flash instructions:
* Assign static IP 192.168.1.100 to PC
* Unplug the power source
* Press the RESET button at the router, don't release it yet!
* Plug the power source. Wait for some seconds
* Release the RESET button
* Browse to http://192.168.1.1
* Upload the openwrt-bmips-bcm6318-tp-link_td-w8968-v3-squashfs-cfe.bin file
* Wait some minutes until the firmware upgrade finish.
Signed-off-by: Mathesh Velayudan <123v.mathesh at gmail.com>
---
.../bmips/bcm6318/base-files/etc/board.d/01_leds | 3 +-
.../bcm6318/base-files/etc/board.d/02_network | 3 +-
.../bcm6318/base-files/etc/uci-defaults/09_fix_crc | 3 +-
.../bmips/dts/bcm6318-tp-link-td-w8968-v3.dts | 253 +++++++++++++++++++++
target/linux/bmips/image/bcm6318.mk | 20 ++
5 files changed, 279 insertions(+), 3 deletions(-)
diff --git a/target/linux/bmips/bcm6318/base-files/etc/board.d/01_leds b/target/linux/bmips/bcm6318/base-files/etc/board.d/01_leds
index 98355460a0..059a4f415a 100644
--- a/target/linux/bmips/bcm6318/base-files/etc/board.d/01_leds
+++ b/target/linux/bmips/bcm6318/base-files/etc/board.d/01_leds
@@ -6,7 +6,8 @@
board_config_update
case "$(board_name)" in
-comtrend,ar-5315u)
+comtrend,ar-5315u |\
+tp-link,td-w8968-v3)
ucidef_set_led_usbport "usb" "USB" "green:usb" "usb1-port1" "usb2-port1"
;;
esac
diff --git a/target/linux/bmips/bcm6318/base-files/etc/board.d/02_network b/target/linux/bmips/bcm6318/base-files/etc/board.d/02_network
index 92b2e8f4d4..b821f6a545 100644
--- a/target/linux/bmips/bcm6318/base-files/etc/board.d/02_network
+++ b/target/linux/bmips/bcm6318/base-files/etc/board.d/02_network
@@ -5,7 +5,8 @@
board_config_update
case "$(board_name)" in
-comtrend,ar-5315u)
+comtrend,ar-5315u |\
+tp-link,td-w8968-v3)
ucidef_set_bridge_device switch
ucidef_set_interface_lan "lan1 lan2 lan3 lan4"
;;
diff --git a/target/linux/bmips/bcm6318/base-files/etc/uci-defaults/09_fix_crc b/target/linux/bmips/bcm6318/base-files/etc/uci-defaults/09_fix_crc
index a52f0ecc40..df09e1d249 100644
--- a/target/linux/bmips/bcm6318/base-files/etc/uci-defaults/09_fix_crc
+++ b/target/linux/bmips/bcm6318/base-files/etc/uci-defaults/09_fix_crc
@@ -3,7 +3,8 @@
. /lib/functions.sh
case "$(board_name)" in
-comtrend,ar-5315u)
+comtrend,ar-5315u) |\
+tp-link,td-w8968-v3)
mtd fixtrx firmware
;;
esac
diff --git a/target/linux/bmips/dts/bcm6318-tp-link-td-w8968-v3.dts b/target/linux/bmips/dts/bcm6318-tp-link-td-w8968-v3.dts
new file mode 100644
index 0000000000..59b209daed
--- /dev/null
+++ b/target/linux/bmips/dts/bcm6318-tp-link-td-w8968-v3.dts
@@ -0,0 +1,253 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "bcm6318.dtsi"
+
+/ {
+ model = "TP-Link TD-W8968 V3";
+ compatible = "tp-link,td-w8968-v3", "brcm,bcm6318";
+
+ aliases {
+ led-boot = &led_power_green;
+ led-failsafe = &led_power_green;
+ led-running = &led_power_green;
+ led-upgrade = &led_power_green;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <100>;
+
+ wlan {
+ label = "wlan";
+ gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WLAN>;
+ debounce-interval = <60>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio 33 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ debounce-interval = <60>;
+ };
+
+ reset {
+ label = "reset";
+ gpios = <&gpio 34 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ debounce-interval = <60>;
+ };
+ };
+
+ bcm43217-sprom {
+ compatible = "brcm,bcma-sprom";
+
+ pci-bus = <1>;
+ pci-dev = <0>;
+
+ nvmem-cells = <&macaddr_cfe_6a0 1>;
+ nvmem-cell-names = "mac-address";
+
+ brcm,sprom = "brcm/bcm43217-sprom.bin";
+ };
+};
+
+&ehci {
+ status = "okay";
+};
+
+ðernet {
+ status = "okay";
+
+ nvmem-cells = <&macaddr_cfe_6a0 0>;
+ nvmem-cell-names = "mac-address";
+};
+
+&hsspi {
+ status = "okay";
+
+ flash at 0 {
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <62500000>;
+ spi-tx-bus-width = <2>;
+ spi-rx-bus-width = <2>;
+ reg = <0>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition at 0 {
+ reg = <0x000000 0x010000>;
+ label = "cfe";
+ read-only;
+
+ nvmem-layout {
+ compatible = "fixed-layout";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_cfe_6a0: macaddr at 6a0 {
+ compatible = "mac-base";
+ reg = <0x6a0 0x6>;
+ #nvmem-cell-cells = <1>;
+ };
+ };
+ };
+
+ partition at 10000 {
+ compatible = "brcm,bcm963xx-imagetag";
+ reg = <0x010000 0x7e0000>;
+ label = "firmware";
+ };
+
+ partition at 7f0000 {
+ reg = <0x7f0000 0x010000>;
+ label = "nvram";
+ };
+ };
+ };
+};
+
+&leds {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_leds
+ &pinctrl_ephy0_act_led &pinctrl_ephy1_act_led
+ &pinctrl_ephy2_act_led &pinctrl_ephy3_act_led>;
+
+ led at 2 {
+ reg = <2>;
+ active-low;
+ function = LED_FUNCTION_WPS;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+
+ led_power_green: led at 3 {
+ reg = <3>;
+ active-high;
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+
+ led at 4 {
+ /* EPHY0 Act */
+ reg = <4>;
+ brcm,hardware-controlled;
+ brcm,link-signal-sources = <4>;
+ };
+
+ led at 5 {
+ /* EPHY1 Act */
+ reg = <5>;
+ brcm,hardware-controlled;
+ brcm,link-signal-sources = <5>;
+ };
+
+ led at 6 {
+ /* EPHY2 Act */
+ reg = <6>;
+ brcm,hardware-controlled;
+ brcm,link-signal-sources = <6>;
+ };
+
+ led at 7 {
+ /* EPHY3 Act */
+ reg = <7>;
+ brcm,hardware-controlled;
+ brcm,link-signal-sources = <7>;
+ };
+
+ led at 8 {
+ reg = <8>;
+ active-low;
+ function = LED_FUNCTION_WAN_ONLINE;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+
+ led at 10 {
+ reg = <10>;
+ active-low;
+ label = "green:dsl";
+ };
+
+ led at 13 {
+ reg = <13>;
+ active-low;
+ function = LED_FUNCTION_USB;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+
+ led at 16 {
+ reg = <16>;
+ active-low;
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+};
+
+&ohci {
+ status = "okay";
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pinctrl {
+ pinctrl_leds: leds {
+ function = "led";
+ pins = "gpio2", "gpio3",
+ "gpio8", "gpio10",
+ "gpio13", "gpio16";
+ };
+};
+
+&switch0 {
+ ports {
+ port at 0 {
+ reg = <0>;
+ label = "lan4";
+
+ phy-handle = <&phy1>;
+ phy-mode = "mii";
+ };
+
+ port at 1 {
+ reg = <1>;
+ label = "lan3";
+
+ phy-handle = <&phy2>;
+ phy-mode = "mii";
+ };
+
+ port at 2 {
+ reg = <2>;
+ label = "lan2";
+
+ phy-handle = <&phy3>;
+ phy-mode = "mii";
+ };
+
+ port at 3 {
+ reg = <3>;
+ label = "lan1";
+
+ phy-handle = <&phy4>;
+ phy-mode = "mii";
+ };
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&usbh {
+ status = "okay";
+};
diff --git a/target/linux/bmips/image/bcm6318.mk b/target/linux/bmips/image/bcm6318.mk
index bfd75cc077..286a30c2f4 100644
--- a/target/linux/bmips/image/bcm6318.mk
+++ b/target/linux/bmips/image/bcm6318.mk
@@ -12,3 +12,23 @@ define Device/comtrend_ar-5315u
kmod-leds-bcm6328
endef
TARGET_DEVICES += comtrend_ar-5315u
+
+define Device/tp-link_td-w8968-v3
+ $(Device/bcm63xx-cfe)
+ DEVICE_VENDOR := TP-Link
+ DEVICE_MODEL := TD-W8968
+ DEVICE_VARIANT := V3
+ DEVICE_ALT0_VENDOR := TP-Link
+ DEVICE_ALT0_MODEL := TD-W8968
+ DEVICE_ALT0_VARIANT := V4
+ DEVICE_ALT1_VENDOR := TP-Link
+ DEVICE_ALT1_MODEL := TD-W8960N
+ DEVICE_ALT1_VARIANT := V5
+ CHIP_ID := 6318
+ CFE_BOARD_ID := 96318REF
+ FLASH_MB := 8
+ DEVICE_PACKAGES += $(USB2_PACKAGES) \
+ $(B43_PACKAGES) broadcom-43217-sprom \
+ kmod-leds-bcm6328
+endef
+TARGET_DEVICES += tp-link_td-w8968-v3
More information about the lede-commits
mailing list