[openwrt/openwrt] mvebu: 6.6: Backport Turris Omnia MCU patches from 6.11
LEDE Commits
lede-commits at lists.infradead.org
Fri Aug 2 13:11:11 PDT 2024
robimarko pushed a commit to openwrt/openwrt.git, branch main:
https://git.openwrt.org/35aa38540a804c3d735bb2661ac670d7afbfe25a
commit 35aa38540a804c3d735bb2661ac670d7afbfe25a
Author: Marek Behún <kabel at kernel.org>
AuthorDate: Mon Jul 22 12:58:20 2024 +0200
mvebu: 6.6: Backport Turris Omnia MCU patches from 6.11
This backports patches
dt-bindings: firmware: add cznic,turris-omnia-mcu binding
platform: cznic: Add preliminary support for Turris Omnia MCU
platform: cznic: turris-omnia-mcu: Add support for MCU connected GPIOs
platform: cznic: turris-omnia-mcu: Add support for poweroff and wakeup
platform: cznic: turris-omnia-mcu: Add support for MCU watchdog
platform: cznic: turris-omnia-mcu: Add support for MCU provided TRNG
ARM: dts: turris-omnia: Add MCU system-controller node
ARM: dts: turris-omnia: Add GPIO key node for front button
platform: cznic: turris-omnia-mcu: Depend on OF
platform: cznic: turris-omnia-mcu: Depend on WATCHDOG
platform: cznic: turris-omnia-mcu: fix Kconfig dependencies
that will be released in 6.11 into mvebu/patches-6.6.
Signed-off-by: Marek Behún <kabel at kernel.org>
Link: https://github.com/openwrt/openwrt/pull/13799
Signed-off-by: Robert Marko <robimarko at gmail.com>
---
target/linux/generic/config-6.6 | 1 +
...-firmware-add-cznic-turris-omnia-mcu-bind.patch | 125 ++
...nic-Add-preliminary-support-for-Turris-Om.patch | 922 ++++++++++++++
...nic-turris-omnia-mcu-Add-support-for-MCU-.patch | 1311 ++++++++++++++++++++
...nic-turris-omnia-mcu-Add-support-for-powe.patch | 415 +++++++
...nic-turris-omnia-mcu-Add-support-for-MCU-.patch | 250 ++++
...nic-turris-omnia-mcu-Add-support-for-MCU-.patch | 225 ++++
...rris-omnia-Add-MCU-system-controller-node.patch | 69 ++
...ris-omnia-Add-GPIO-key-node-for-front-but.patch | 46 +
...tform-cznic-turris-omnia-mcu-Depend-on-OF.patch | 32 +
...cznic-turris-omnia-mcu-Depend-on-WATCHDOG.patch | 32 +
...nic-turris-omnia-mcu-fix-Kconfig-dependen.patch | 45 +
...-Add-an-entry-for-the-IEI-WT61P803-PUZZLE.patch | 2 +-
13 files changed, 3474 insertions(+), 1 deletion(-)
diff --git a/target/linux/generic/config-6.6 b/target/linux/generic/config-6.6
index 20fe98099f..076a9f9691 100644
--- a/target/linux/generic/config-6.6
+++ b/target/linux/generic/config-6.6
@@ -875,6 +875,7 @@ CONFIG_CFG80211_HEADERS=y
# CONFIG_CHELSIO_T4 is not set
# CONFIG_CHELSIO_T4VF is not set
# CONFIG_CHROME_PLATFORMS is not set
+# CONFIG_CZNIC_PLATFORMS is not set
# CONFIG_CHR_DEV_SCH is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_ST is not set
diff --git a/target/linux/mvebu/patches-6.6/820-v6.11-01-dt-bindings-firmware-add-cznic-turris-omnia-mcu-bind.patch b/target/linux/mvebu/patches-6.6/820-v6.11-01-dt-bindings-firmware-add-cznic-turris-omnia-mcu-bind.patch
new file mode 100644
index 0000000000..4d6d8e82c2
--- /dev/null
+++ b/target/linux/mvebu/patches-6.6/820-v6.11-01-dt-bindings-firmware-add-cznic-turris-omnia-mcu-bind.patch
@@ -0,0 +1,125 @@
+From cdfed4d05780450817ef96567e2cd8d355ca9e70 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <kabel at kernel.org>
+Date: Mon, 1 Jul 2024 13:30:03 +0200
+Subject: [PATCH 01/11] dt-bindings: firmware: add cznic,turris-omnia-mcu
+ binding
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Add binding for cznic,turris-omnia-mcu, the device-tree node
+representing the system-controller features provided by the MCU on the
+Turris Omnia router.
+
+Signed-off-by: Marek Behún <kabel at kernel.org>
+Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
+Reviewed-by: Conor Dooley <conor.dooley at microchip.com>
+Reviewed-by: Andy Shevchenko <andy at kernel.org>
+Acked-by: Bartosz Golaszewski <bartosz.golaszewski at linaro.org>
+Link: https://lore.kernel.org/r/20240701113010.16447-2-kabel@kernel.org
+Signed-off-by: Arnd Bergmann <arnd at arndb.de>
+---
+ .../firmware/cznic,turris-omnia-mcu.yaml | 86 +++++++++++++++++++
+ MAINTAINERS | 1 +
+ 2 files changed, 87 insertions(+)
+ create mode 100644 Documentation/devicetree/bindings/firmware/cznic,turris-omnia-mcu.yaml
+
+--- /dev/null
++++ b/Documentation/devicetree/bindings/firmware/cznic,turris-omnia-mcu.yaml
+@@ -0,0 +1,86 @@
++# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
++%YAML 1.2
++---
++$id: http://devicetree.org/schemas/firmware/cznic,turris-omnia-mcu.yaml#
++$schema: http://devicetree.org/meta-schemas/core.yaml#
++
++title: CZ.NIC's Turris Omnia MCU
++
++maintainers:
++ - Marek Behún <kabel at kernel.org>
++
++description:
++ The MCU on Turris Omnia acts as a system controller providing additional
++ GPIOs, interrupts, watchdog, system power off and wakeup configuration.
++
++properties:
++ compatible:
++ const: cznic,turris-omnia-mcu
++
++ reg:
++ description: MCU I2C slave address
++ maxItems: 1
++
++ interrupts:
++ maxItems: 1
++
++ interrupt-controller: true
++
++ '#interrupt-cells':
++ const: 2
++ description: |
++ The first cell specifies the interrupt number (0 to 63), the second cell
++ specifies interrupt type (which can be one of IRQ_TYPE_EDGE_RISING,
++ IRQ_TYPE_EDGE_FALLING or IRQ_TYPE_EDGE_BOTH).
++ The interrupt numbers correspond sequentially to GPIO numbers, taking the
++ GPIO banks into account:
++ IRQ number GPIO bank GPIO pin within bank
++ 0 - 15 0 0 - 15
++ 16 - 47 1 0 - 31
++ 48 - 63 2 0 - 15
++ There are several exceptions:
++ IRQ number meaning
++ 11 LED panel brightness changed by button press
++ 13 TRNG entropy ready
++ 14 ECDSA message signature computation done
++
++ gpio-controller: true
++
++ '#gpio-cells':
++ const: 3
++ description:
++ The first cell is bank number (0, 1 or 2), the second cell is pin number
++ within the bank (0 to 15 for banks 0 and 2, 0 to 31 for bank 1), and the
++ third cell specifies consumer flags.
++
++required:
++ - compatible
++ - reg
++ - interrupts
++ - interrupt-controller
++ - gpio-controller
++
++additionalProperties: false
++
++examples:
++ - |
++ #include <dt-bindings/interrupt-controller/irq.h>
++
++ i2c {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ system-controller at 2a {
++ compatible = "cznic,turris-omnia-mcu";
++ reg = <0x2a>;
++
++ interrupt-parent = <&gpio1>;
++ interrupts = <11 IRQ_TYPE_NONE>;
++
++ gpio-controller;
++ #gpio-cells = <3>;
++
++ interrupt-controller;
++ #interrupt-cells = <2>;
++ };
++ };
+--- a/MAINTAINERS
++++ b/MAINTAINERS
+@@ -2104,6 +2104,7 @@ F: Documentation/ABI/testing/sysfs-bus-m
+ F: Documentation/ABI/testing/sysfs-firmware-turris-mox-rwtm
+ F: Documentation/devicetree/bindings/bus/moxtet.txt
+ F: Documentation/devicetree/bindings/firmware/cznic,turris-mox-rwtm.txt
++F: Documentation/devicetree/bindings/firmware/cznic,turris-omnia-mcu.yaml
+ F: Documentation/devicetree/bindings/gpio/gpio-moxtet.txt
+ F: Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml
+ F: Documentation/devicetree/bindings/watchdog/armada-37xx-wdt.txt
diff --git a/target/linux/mvebu/patches-6.6/820-v6.11-02-platform-cznic-Add-preliminary-support-for-Turris-Om.patch b/target/linux/mvebu/patches-6.6/820-v6.11-02-platform-cznic-Add-preliminary-support-for-Turris-Om.patch
new file mode 100644
index 0000000000..72bd18d144
--- /dev/null
+++ b/target/linux/mvebu/patches-6.6/820-v6.11-02-platform-cznic-Add-preliminary-support-for-Turris-Om.patch
@@ -0,0 +1,922 @@
+From 4a63f684c8badfc43f384df2291ed2566909a3bc Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <kabel at kernel.org>
+Date: Mon, 1 Jul 2024 13:30:04 +0200
+Subject: [PATCH 02/11] platform: cznic: Add preliminary support for Turris
+ Omnia MCU
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Add the basic skeleton for a new platform driver for the microcontroller
+found on the Turris Omnia board.
+
+Signed-off-by: Marek Behún <kabel at kernel.org>
+Reviewed-by: Andy Shevchenko <andy at kernel.org>
+Acked-by: Bartosz Golaszewski <bartosz.golaszewski at linaro.org>
+Link: https://lore.kernel.org/r/20240701113010.16447-3-kabel@kernel.org
+Signed-off-by: Arnd Bergmann <arnd at arndb.de>
+---
+ .../sysfs-bus-i2c-devices-turris-omnia-mcu | 81 ++++
+ MAINTAINERS | 3 +
+ drivers/platform/Kconfig | 2 +
+ drivers/platform/Makefile | 1 +
+ drivers/platform/cznic/Kconfig | 25 ++
+ drivers/platform/cznic/Makefile | 4 +
+ .../platform/cznic/turris-omnia-mcu-base.c | 393 ++++++++++++++++++
+ drivers/platform/cznic/turris-omnia-mcu.h | 74 ++++
+ include/linux/turris-omnia-mcu-interface.h | 249 +++++++++++
+ 9 files changed, 832 insertions(+)
+ create mode 100644 Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu
+ create mode 100644 drivers/platform/cznic/Kconfig
+ create mode 100644 drivers/platform/cznic/Makefile
+ create mode 100644 drivers/platform/cznic/turris-omnia-mcu-base.c
+ create mode 100644 drivers/platform/cznic/turris-omnia-mcu.h
+ create mode 100644 include/linux/turris-omnia-mcu-interface.h
+
+--- /dev/null
++++ b/Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu
+@@ -0,0 +1,81 @@
++What: /sys/bus/i2c/devices/<mcu_device>/board_revision
++Date: September 2024
++KernelVersion: 6.11
++Contact: Marek Behún <kabel at kernel.org>
++Description: (RO) Contains board revision number.
++
++ Only available if board information is burned in the MCU (older
++ revisions have board information burned in the ATSHA204-A chip).
++
++ Format: %u.
++
++What: /sys/bus/i2c/devices/<mcu_device>/first_mac_address
++Date: September 2024
++KernelVersion: 6.11
++Contact: Marek Behún <kabel at kernel.org>
++Description: (RO) Contains device first MAC address. Each Turris Omnia is
++ allocated 3 MAC addresses. The two additional addresses are
++ computed from the first one by incrementing it.
++
++ Only available if board information is burned in the MCU (older
++ revisions have board information burned in the ATSHA204-A chip).
++
++ Format: %pM.
++
++What: /sys/bus/i2c/devices/<mcu_device>/fw_features
++Date: September 2024
++KernelVersion: 6.11
++Contact: Marek Behún <kabel at kernel.org>
++Description: (RO) Newer versions of the microcontroller firmware report the
++ features they support. These can be read from this file. If the
++ MCU firmware is too old, this file reads 0x0.
++
++ Format: 0x%x.
++
++What: /sys/bus/i2c/devices/<mcu_device>/fw_version_hash_application
++Date: September 2024
++KernelVersion: 6.11
++Contact: Marek Behún <kabel at kernel.org>
++Description: (RO) Contains the version hash (commit hash) of the application
++ part of the microcontroller firmware.
++
++ Format: %s.
++
++What: /sys/bus/i2c/devices/<mcu_device>/fw_version_hash_bootloader
++Date: September 2024
++KernelVersion: 6.11
++Contact: Marek Behún <kabel at kernel.org>
++Description: (RO) Contains the version hash (commit hash) of the bootloader
++ part of the microcontroller firmware.
++
++ Format: %s.
++
++What: /sys/bus/i2c/devices/<mcu_device>/mcu_type
++Date: September 2024
++KernelVersion: 6.11
++Contact: Marek Behún <kabel at kernel.org>
++Description: (RO) Contains the microcontroller type (STM32, GD32, MKL).
++
++ Format: %s.
++
++What: /sys/bus/i2c/devices/<mcu_device>/reset_selector
++Date: September 2024
++KernelVersion: 6.11
++Contact: Marek Behún <kabel at kernel.org>
++Description: (RO) Contains the selected factory reset level, determined by
++ how long the rear reset button was held by the user during board
++ reset.
++
++ Format: %i.
++
++What: /sys/bus/i2c/devices/<mcu_device>/serial_number
++Date: September 2024
++KernelVersion: 6.11
++Contact: Marek Behún <kabel at kernel.org>
++Description: (RO) Contains the 64-bit board serial number in hexadecimal
++ format.
++
++ Only available if board information is burned in the MCU (older
++ revisions have board information burned in the ATSHA204-A chip).
++
++ Format: %016X.
+--- a/MAINTAINERS
++++ b/MAINTAINERS
+@@ -2100,6 +2100,7 @@ M: Marek Behún <kabel at kernel.org>
+ S: Maintained
+ W: https://www.turris.cz/
+ F: Documentation/ABI/testing/debugfs-moxtet
++F: Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu
+ F: Documentation/ABI/testing/sysfs-bus-moxtet-devices
+ F: Documentation/ABI/testing/sysfs-firmware-turris-mox-rwtm
+ F: Documentation/devicetree/bindings/bus/moxtet.txt
+@@ -2113,10 +2114,12 @@ F: drivers/firmware/turris-mox-rwtm.c
+ F: drivers/gpio/gpio-moxtet.c
+ F: drivers/leds/leds-turris-omnia.c
+ F: drivers/mailbox/armada-37xx-rwtm-mailbox.c
++F: drivers/platform/cznic/
+ F: drivers/watchdog/armada_37xx_wdt.c
+ F: include/dt-bindings/bus/moxtet.h
+ F: include/linux/armada-37xx-rwtm-mailbox.h
+ F: include/linux/moxtet.h
++F: include/linux/turris-omnia-mcu-interface.h
+
+ ARM/FARADAY FA526 PORT
+ M: Hans Ulli Kroll <ulli.kroll at googlemail.com>
+--- a/drivers/platform/Kconfig
++++ b/drivers/platform/Kconfig
+@@ -7,6 +7,8 @@ source "drivers/platform/goldfish/Kconfi
+
+ source "drivers/platform/chrome/Kconfig"
+
++source "drivers/platform/cznic/Kconfig"
++
+ source "drivers/platform/mellanox/Kconfig"
+
+ source "drivers/platform/olpc/Kconfig"
+--- a/drivers/platform/Makefile
++++ b/drivers/platform/Makefile
+@@ -10,5 +10,6 @@ obj-$(CONFIG_MIPS) += mips/
+ obj-$(CONFIG_OLPC_EC) += olpc/
+ obj-$(CONFIG_GOLDFISH) += goldfish/
+ obj-$(CONFIG_CHROME_PLATFORMS) += chrome/
++obj-$(CONFIG_CZNIC_PLATFORMS) += cznic/
+ obj-$(CONFIG_SURFACE_PLATFORMS) += surface/
+ obj-$(CONFIG_MIKROTIK) += mikrotik/
+--- /dev/null
++++ b/drivers/platform/cznic/Kconfig
+@@ -0,0 +1,25 @@
++# SPDX-License-Identifier: GPL-2.0-only
++#
++# For a description of the syntax of this configuration file,
++# see Documentation/kbuild/kconfig-language.rst.
++#
++
++menuconfig CZNIC_PLATFORMS
++ bool "Platform support for CZ.NIC's Turris hardware"
++ help
++ Say Y here to be able to choose driver support for CZ.NIC's Turris
++ devices. This option alone does not add any kernel code.
++
++if CZNIC_PLATFORMS
++
++config TURRIS_OMNIA_MCU
++ tristate "Turris Omnia MCU driver"
++ depends on MACH_ARMADA_38X || COMPILE_TEST
++ depends on I2C
++ help
++ Say Y here to add support for the features implemented by the
++ microcontroller on the CZ.NIC's Turris Omnia SOHO router.
++ To compile this driver as a module, choose M here; the module will be
++ called turris-omnia-mcu.
++
++endif # CZNIC_PLATFORMS
+--- /dev/null
++++ b/drivers/platform/cznic/Makefile
+@@ -0,0 +1,4 @@
++# SPDX-License-Identifier: GPL-2.0-only
++
++obj-$(CONFIG_TURRIS_OMNIA_MCU) += turris-omnia-mcu.o
++turris-omnia-mcu-y := turris-omnia-mcu-base.o
+--- /dev/null
++++ b/drivers/platform/cznic/turris-omnia-mcu-base.c
+@@ -0,0 +1,393 @@
++// SPDX-License-Identifier: GPL-2.0
++/*
++ * CZ.NIC's Turris Omnia MCU driver
++ *
++ * 2024 by Marek Behún <kabel at kernel.org>
++ */
++
++#include <linux/bits.h>
++#include <linux/device.h>
++#include <linux/errno.h>
++#include <linux/hex.h>
++#include <linux/i2c.h>
++#include <linux/module.h>
++#include <linux/string.h>
++#include <linux/sysfs.h>
++#include <linux/types.h>
++
++#include <linux/turris-omnia-mcu-interface.h>
++#include "turris-omnia-mcu.h"
++
++#define OMNIA_FW_VERSION_LEN 20
++#define OMNIA_FW_VERSION_HEX_LEN (2 * OMNIA_FW_VERSION_LEN + 1)
++#define OMNIA_BOARD_INFO_LEN 16
++
++int omnia_cmd_write_read(const struct i2c_client *client,
++ void *cmd, unsigned int cmd_len,
++ void *reply, unsigned int reply_len)
++{
++ struct i2c_msg msgs[2];
++ int ret, num;
++
++ msgs[0].addr = client->addr;
++ msgs[0].flags = 0;
++ msgs[0].len = cmd_len;
++ msgs[0].buf = cmd;
++ num = 1;
++
++ if (reply_len) {
++ msgs[1].addr = client->addr;
++ msgs[1].flags = I2C_M_RD;
++ msgs[1].len = reply_len;
++ msgs[1].buf = reply;
++ num++;
++ }
++
++ ret = i2c_transfer(client->adapter, msgs, num);
++ if (ret < 0)
++ return ret;
++ if (ret != num)
++ return -EIO;
++
++ return 0;
++}
++
++static int omnia_get_version_hash(struct omnia_mcu *mcu, bool bootloader,
++ char version[static OMNIA_FW_VERSION_HEX_LEN])
++{
++ u8 reply[OMNIA_FW_VERSION_LEN];
++ char *p;
++ int err;
++
++ err = omnia_cmd_read(mcu->client,
++ bootloader ? OMNIA_CMD_GET_FW_VERSION_BOOT
++ : OMNIA_CMD_GET_FW_VERSION_APP,
++ reply, sizeof(reply));
++ if (err)
++ return err;
++
++ p = bin2hex(version, reply, OMNIA_FW_VERSION_LEN);
++ *p = '\0';
++
++ return 0;
++}
++
++static ssize_t fw_version_hash_show(struct device *dev, char *buf,
++ bool bootloader)
++{
++ struct omnia_mcu *mcu = dev_get_drvdata(dev);
++ char version[OMNIA_FW_VERSION_HEX_LEN];
++ int err;
++
++ err = omnia_get_version_hash(mcu, bootloader, version);
++ if (err)
++ return err;
++
++ return sysfs_emit(buf, "%s\n", version);
++}
++
++static ssize_t fw_version_hash_application_show(struct device *dev,
++ struct device_attribute *a,
++ char *buf)
++{
++ return fw_version_hash_show(dev, buf, false);
++}
++static DEVICE_ATTR_RO(fw_version_hash_application);
++
++static ssize_t fw_version_hash_bootloader_show(struct device *dev,
++ struct device_attribute *a,
++ char *buf)
++{
++ return fw_version_hash_show(dev, buf, true);
++}
++static DEVICE_ATTR_RO(fw_version_hash_bootloader);
++
++static ssize_t fw_features_show(struct device *dev, struct device_attribute *a,
++ char *buf)
++{
++ struct omnia_mcu *mcu = dev_get_drvdata(dev);
++
++ return sysfs_emit(buf, "0x%x\n", mcu->features);
++}
++static DEVICE_ATTR_RO(fw_features);
++
++static ssize_t mcu_type_show(struct device *dev, struct device_attribute *a,
++ char *buf)
++{
++ struct omnia_mcu *mcu = dev_get_drvdata(dev);
++
++ return sysfs_emit(buf, "%s\n", mcu->type);
++}
++static DEVICE_ATTR_RO(mcu_type);
++
++static ssize_t reset_selector_show(struct device *dev,
++ struct device_attribute *a, char *buf)
++{
++ u8 reply;
++ int err;
++
++ err = omnia_cmd_read_u8(to_i2c_client(dev), OMNIA_CMD_GET_RESET,
++ &reply);
++ if (err)
++ return err;
++
++ return sysfs_emit(buf, "%d\n", reply);
++}
++static DEVICE_ATTR_RO(reset_selector);
++
++static ssize_t serial_number_show(struct device *dev,
++ struct device_attribute *a, char *buf)
++{
++ struct omnia_mcu *mcu = dev_get_drvdata(dev);
++
++ return sysfs_emit(buf, "%016llX\n", mcu->board_serial_number);
++}
++static DEVICE_ATTR_RO(serial_number);
++
++static ssize_t first_mac_address_show(struct device *dev,
++ struct device_attribute *a, char *buf)
++{
++ struct omnia_mcu *mcu = dev_get_drvdata(dev);
++
++ return sysfs_emit(buf, "%pM\n", mcu->board_first_mac);
++}
++static DEVICE_ATTR_RO(first_mac_address);
++
++static ssize_t board_revision_show(struct device *dev,
++ struct device_attribute *a, char *buf)
++{
++ struct omnia_mcu *mcu = dev_get_drvdata(dev);
++
++ return sysfs_emit(buf, "%u\n", mcu->board_revision);
++}
++static DEVICE_ATTR_RO(board_revision);
++
++static struct attribute *omnia_mcu_base_attrs[] = {
++ &dev_attr_fw_version_hash_application.attr,
++ &dev_attr_fw_version_hash_bootloader.attr,
++ &dev_attr_fw_features.attr,
++ &dev_attr_mcu_type.attr,
++ &dev_attr_reset_selector.attr,
++ &dev_attr_serial_number.attr,
++ &dev_attr_first_mac_address.attr,
++ &dev_attr_board_revision.attr,
++ NULL
++};
++
++static umode_t omnia_mcu_base_attrs_visible(struct kobject *kobj,
++ struct attribute *a, int n)
++{
++ struct device *dev = kobj_to_dev(kobj);
++ struct omnia_mcu *mcu = dev_get_drvdata(dev);
++
++ if ((a == &dev_attr_serial_number.attr ||
++ a == &dev_attr_first_mac_address.attr ||
++ a == &dev_attr_board_revision.attr) &&
++ !(mcu->features & OMNIA_FEAT_BOARD_INFO))
++ return 0;
++
++ return a->mode;
++}
++
++static const struct attribute_group omnia_mcu_base_group = {
++ .attrs = omnia_mcu_base_attrs,
++ .is_visible = omnia_mcu_base_attrs_visible,
++};
++
++static const struct attribute_group *omnia_mcu_groups[] = {
++ &omnia_mcu_base_group,
++ NULL
++};
++
++static void omnia_mcu_print_version_hash(struct omnia_mcu *mcu, bool bootloader)
++{
++ const char *type = bootloader ? "bootloader" : "application";
++ struct device *dev = &mcu->client->dev;
++ char version[OMNIA_FW_VERSION_HEX_LEN];
++ int err;
++
++ err = omnia_get_version_hash(mcu, bootloader, version);
++ if (err) {
++ dev_err(dev, "Cannot read MCU %s firmware version: %d\n",
++ type, err);
++ return;
++ }
++
++ dev_info(dev, "MCU %s firmware version hash: %s\n", type, version);
++}
++
++static const char *omnia_status_to_mcu_type(u16 status)
++{
++ switch (status & OMNIA_STS_MCU_TYPE_MASK) {
++ case OMNIA_STS_MCU_TYPE_STM32:
++ return "STM32";
++ case OMNIA_STS_MCU_TYPE_GD32:
++ return "GD32";
++ case OMNIA_STS_MCU_TYPE_MKL:
++ return "MKL";
++ default:
++ return "unknown";
++ }
++}
++
++static void omnia_info_missing_feature(struct device *dev, const char *feature)
++{
++ dev_info(dev,
++ "Your board's MCU firmware does not support the %s feature.\n",
++ feature);
++}
++
++static int omnia_mcu_read_features(struct omnia_mcu *mcu)
++{
++ static const struct {
++ u16 mask;
++ const char *name;
++ } features[] = {
++#define _DEF_FEAT(_n, _m) { OMNIA_FEAT_ ## _n, _m }
++ _DEF_FEAT(EXT_CMDS, "extended control and status"),
++ _DEF_FEAT(WDT_PING, "watchdog pinging"),
++ _DEF_FEAT(LED_STATE_EXT_MASK, "peripheral LED pins reading"),
++ _DEF_FEAT(NEW_INT_API, "new interrupt API"),
++ _DEF_FEAT(POWEROFF_WAKEUP, "poweroff and wakeup"),
++ _DEF_FEAT(TRNG, "true random number generator"),
++#undef _DEF_FEAT
++ };
++ struct i2c_client *client = mcu->client;
++ struct device *dev = &client->dev;
++ bool suggest_fw_upgrade = false;
++ u16 status;
++ int err;
++
++ /* status word holds MCU type, which we need below */
++ err = omnia_cmd_read_u16(client, OMNIA_CMD_GET_STATUS_WORD, &status);
++ if (err)
++ return err;
++
++ /*
++ * Check whether MCU firmware supports the OMNIA_CMD_GET_FEATURES
++ * command.
++ */
++ if (status & OMNIA_STS_FEATURES_SUPPORTED) {
++ /* try read 32-bit features */
++ err = omnia_cmd_read_u32(client, OMNIA_CMD_GET_FEATURES,
++ &mcu->features);
++ if (err) {
++ /* try read 16-bit features */
++ u16 features16;
++
++ err = omnia_cmd_read_u16(client, OMNIA_CMD_GET_FEATURES,
++ &features16);
++ if (err)
++ return err;
++
++ mcu->features = features16;
++ } else {
++ if (mcu->features & OMNIA_FEAT_FROM_BIT_16_INVALID)
++ mcu->features &= GENMASK(15, 0);
++ }
++ } else {
++ dev_info(dev,
++ "Your board's MCU firmware does not support feature reading.\n");
++ suggest_fw_upgrade = true;
++ }
++
++ mcu->type = omnia_status_to_mcu_type(status);
++ dev_info(dev, "MCU type %s%s\n", mcu->type,
++ (mcu->features & OMNIA_FEAT_PERIPH_MCU) ?
++ ", with peripheral resets wired" : "");
++
++ omnia_mcu_print_version_hash(mcu, true);
++
++ if (mcu->features & OMNIA_FEAT_BOOTLOADER)
++ dev_warn(dev,
++ "MCU is running bootloader firmware. Was firmware upgrade interrupted?\n");
++ else
++ omnia_mcu_print_version_hash(mcu, false);
++
++ for (unsigned int i = 0; i < ARRAY_SIZE(features); i++) {
++ if (mcu->features & features[i].mask)
++ continue;
++
++ omnia_info_missing_feature(dev, features[i].name);
++ suggest_fw_upgrade = true;
++ }
++
++ if (suggest_fw_upgrade)
++ dev_info(dev,
++ "Consider upgrading MCU firmware with the omnia-mcutool utility.\n");
++
++ return 0;
++}
++
++static int omnia_mcu_read_board_info(struct omnia_mcu *mcu)
++{
++ u8 reply[1 + OMNIA_BOARD_INFO_LEN];
++ int err;
++
++ err = omnia_cmd_read(mcu->client, OMNIA_CMD_BOARD_INFO_GET, reply,
++ sizeof(reply));
++ if (err)
++ return err;
++
++ if (reply[0] != OMNIA_BOARD_INFO_LEN)
++ return -EIO;
++
++ mcu->board_serial_number = get_unaligned_le64(&reply[1]);
++
++ /* we can't use ether_addr_copy() because reply is not u16-aligned */
++ memcpy(mcu->board_first_mac, &reply[9], sizeof(mcu->board_first_mac));
++
++ mcu->board_revision = reply[15];
++
++ return 0;
++}
++
++static int omnia_mcu_probe(struct i2c_client *client)
++{
++ struct device *dev = &client->dev;
++ struct omnia_mcu *mcu;
++ int err;
++
++ if (!client->irq)
++ return dev_err_probe(dev, -EINVAL, "IRQ resource not found\n");
++
++ mcu = devm_kzalloc(dev, sizeof(*mcu), GFP_KERNEL);
++ if (!mcu)
++ return -ENOMEM;
++
++ mcu->client = client;
++ i2c_set_clientdata(client, mcu);
++
++ err = omnia_mcu_read_features(mcu);
++ if (err)
++ return dev_err_probe(dev, err,
++ "Cannot determine MCU supported features\n");
++
++ if (mcu->features & OMNIA_FEAT_BOARD_INFO) {
++ err = omnia_mcu_read_board_info(mcu);
++ if (err)
++ return dev_err_probe(dev, err,
++ "Cannot read board info\n");
++ }
++
++ return 0;
++}
++
++static const struct of_device_id of_omnia_mcu_match[] = {
++ { .compatible = "cznic,turris-omnia-mcu" },
++ {}
++};
++
++static struct i2c_driver omnia_mcu_driver = {
++ .probe = omnia_mcu_probe,
++ .driver = {
++ .name = "turris-omnia-mcu",
++ .of_match_table = of_omnia_mcu_match,
++ .dev_groups = omnia_mcu_groups,
++ },
++};
++module_i2c_driver(omnia_mcu_driver);
++
++MODULE_AUTHOR("Marek Behun <kabel at kernel.org>");
++MODULE_DESCRIPTION("CZ.NIC's Turris Omnia MCU");
++MODULE_LICENSE("GPL");
+--- /dev/null
++++ b/drivers/platform/cznic/turris-omnia-mcu.h
+@@ -0,0 +1,74 @@
++/* SPDX-License-Identifier: GPL-2.0 */
++/*
++ * CZ.NIC's Turris Omnia MCU driver
++ *
++ * 2024 by Marek Behún <kabel at kernel.org>
++ */
++
++#ifndef __TURRIS_OMNIA_MCU_H
++#define __TURRIS_OMNIA_MCU_H
++
++#include <linux/if_ether.h>
++#include <linux/types.h>
++#include <asm/byteorder.h>
++
++struct i2c_client;
++
++struct omnia_mcu {
++ struct i2c_client *client;
++ const char *type;
++ u32 features;
++
++ /* board information */
++ u64 board_serial_number;
++ u8 board_first_mac[ETH_ALEN];
++ u8 board_revision;
++};
++
++int omnia_cmd_write_read(const struct i2c_client *client,
++ void *cmd, unsigned int cmd_len,
++ void *reply, unsigned int reply_len);
++
++static inline int omnia_cmd_read(const struct i2c_client *client, u8 cmd,
++ void *reply, unsigned int len)
++{
++ return omnia_cmd_write_read(client, &cmd, 1, reply, len);
++}
++
++static inline int omnia_cmd_read_u32(const struct i2c_client *client, u8 cmd,
++ u32 *dst)
++{
++ __le32 reply;
++ int err;
++
++ err = omnia_cmd_read(client, cmd, &reply, sizeof(reply));
++ if (err)
++ return err;
++
++ *dst = le32_to_cpu(reply);
++
++ return 0;
++}
++
++static inline int omnia_cmd_read_u16(const struct i2c_client *client, u8 cmd,
++ u16 *dst)
++{
++ __le16 reply;
++ int err;
++
++ err = omnia_cmd_read(client, cmd, &reply, sizeof(reply));
++ if (err)
++ return err;
++
++ *dst = le16_to_cpu(reply);
++
++ return 0;
++}
++
++static inline int omnia_cmd_read_u8(const struct i2c_client *client, u8 cmd,
++ u8 *reply)
++{
++ return omnia_cmd_read(client, cmd, reply, sizeof(*reply));
++}
++
++#endif /* __TURRIS_OMNIA_MCU_H */
+--- /dev/null
++++ b/include/linux/turris-omnia-mcu-interface.h
+@@ -0,0 +1,249 @@
++/* SPDX-License-Identifier: GPL-2.0 */
++/*
++ * CZ.NIC's Turris Omnia MCU I2C interface commands definitions
++ *
++ * 2024 by Marek Behún <kabel at kernel.org>
++ */
++
++#ifndef __TURRIS_OMNIA_MCU_INTERFACE_H
++#define __TURRIS_OMNIA_MCU_INTERFACE_H
++
++#include <linux/bitfield.h>
++#include <linux/bits.h>
++
++enum omnia_commands_e {
++ OMNIA_CMD_GET_STATUS_WORD = 0x01, /* slave sends status word back */
++ OMNIA_CMD_GENERAL_CONTROL = 0x02,
++ OMNIA_CMD_LED_MODE = 0x03, /* default/user */
++ OMNIA_CMD_LED_STATE = 0x04, /* LED on/off */
++ OMNIA_CMD_LED_COLOR = 0x05, /* LED number + RED + GREEN + BLUE */
++ OMNIA_CMD_USER_VOLTAGE = 0x06,
++ OMNIA_CMD_SET_BRIGHTNESS = 0x07,
++ OMNIA_CMD_GET_BRIGHTNESS = 0x08,
++ OMNIA_CMD_GET_RESET = 0x09,
++ OMNIA_CMD_GET_FW_VERSION_APP = 0x0A, /* 20B git hash number */
++ OMNIA_CMD_SET_WATCHDOG_STATE = 0x0B, /* 0 - disable
++ * 1 - enable / ping
++ * after boot watchdog is started
++ * with 2 minutes timeout
++ */
++
++ /* OMNIA_CMD_WATCHDOG_STATUS = 0x0C, not implemented anymore */
++
++ OMNIA_CMD_GET_WATCHDOG_STATE = 0x0D,
++ OMNIA_CMD_GET_FW_VERSION_BOOT = 0x0E, /* 20B Git hash number */
++ OMNIA_CMD_GET_FW_CHECKSUM = 0x0F, /* 4B length, 4B checksum */
++
++ /* available if FEATURES_SUPPORTED bit set in status word */
++ OMNIA_CMD_GET_FEATURES = 0x10,
++
++ /* available if EXT_CMD bit set in features */
++ OMNIA_CMD_GET_EXT_STATUS_DWORD = 0x11,
++ OMNIA_CMD_EXT_CONTROL = 0x12,
++ OMNIA_CMD_GET_EXT_CONTROL_STATUS = 0x13,
++
++ /* available if NEW_INT_API bit set in features */
++ OMNIA_CMD_GET_INT_AND_CLEAR = 0x14,
++ OMNIA_CMD_GET_INT_MASK = 0x15,
++ OMNIA_CMD_SET_INT_MASK = 0x16,
++
++ /* available if FLASHING bit set in features */
++ OMNIA_CMD_FLASH = 0x19,
++
++ /* available if WDT_PING bit set in features */
++ OMNIA_CMD_SET_WDT_TIMEOUT = 0x20,
++ OMNIA_CMD_GET_WDT_TIMELEFT = 0x21,
++
++ /* available if POWEROFF_WAKEUP bit set in features */
++ OMNIA_CMD_SET_WAKEUP = 0x22,
++ OMNIA_CMD_GET_UPTIME_AND_WAKEUP = 0x23,
++ OMNIA_CMD_POWER_OFF = 0x24,
++
++ /* available if USB_OVC_PROT_SETTING bit set in features */
++ OMNIA_CMD_SET_USB_OVC_PROT = 0x25,
++ OMNIA_CMD_GET_USB_OVC_PROT = 0x26,
++
++ /* available if TRNG bit set in features */
++ OMNIA_CMD_TRNG_COLLECT_ENTROPY = 0x28,
++
++ /* available if CRYPTO bit set in features */
++ OMNIA_CMD_CRYPTO_GET_PUBLIC_KEY = 0x29,
++ OMNIA_CMD_CRYPTO_SIGN_MESSAGE = 0x2A,
++ OMNIA_CMD_CRYPTO_COLLECT_SIGNATURE = 0x2B,
++
++ /* available if BOARD_INFO it set in features */
++ OMNIA_CMD_BOARD_INFO_GET = 0x2C,
++ OMNIA_CMD_BOARD_INFO_BURN = 0x2D,
++
++ /* available only at address 0x2b (LED-controller) */
++ /* available only if LED_GAMMA_CORRECTION bit set in features */
++ OMNIA_CMD_SET_GAMMA_CORRECTION = 0x30,
++ OMNIA_CMD_GET_GAMMA_CORRECTION = 0x31,
++
++ /* available only at address 0x2b (LED-controller) */
++ /* available only if PER_LED_CORRECTION bit set in features */
++ /* available only if FROM_BIT_16_INVALID bit NOT set in features */
++ OMNIA_CMD_SET_LED_CORRECTIONS = 0x32,
++ OMNIA_CMD_GET_LED_CORRECTIONS = 0x33,
++};
++
++enum omnia_flashing_commands_e {
++ OMNIA_FLASH_CMD_UNLOCK = 0x01,
++ OMNIA_FLASH_CMD_SIZE_AND_CSUM = 0x02,
++ OMNIA_FLASH_CMD_PROGRAM = 0x03,
++ OMNIA_FLASH_CMD_RESET = 0x04,
++};
++
++enum omnia_sts_word_e {
++ OMNIA_STS_MCU_TYPE_MASK = GENMASK(1, 0),
++ OMNIA_STS_MCU_TYPE_STM32 = FIELD_PREP_CONST(OMNIA_STS_MCU_TYPE_MASK, 0),
++ OMNIA_STS_MCU_TYPE_GD32 = FIELD_PREP_CONST(OMNIA_STS_MCU_TYPE_MASK, 1),
++ OMNIA_STS_MCU_TYPE_MKL = FIELD_PREP_CONST(OMNIA_STS_MCU_TYPE_MASK, 2),
++ OMNIA_STS_FEATURES_SUPPORTED = BIT(2),
++ OMNIA_STS_USER_REGULATOR_NOT_SUPPORTED = BIT(3),
++ OMNIA_STS_CARD_DET = BIT(4),
++ OMNIA_STS_MSATA_IND = BIT(5),
++ OMNIA_STS_USB30_OVC = BIT(6),
++ OMNIA_STS_USB31_OVC = BIT(7),
++ OMNIA_STS_USB30_PWRON = BIT(8),
++ OMNIA_STS_USB31_PWRON = BIT(9),
++ OMNIA_STS_ENABLE_4V5 = BIT(10),
++ OMNIA_STS_BUTTON_MODE = BIT(11),
++ OMNIA_STS_BUTTON_PRESSED = BIT(12),
++ OMNIA_STS_BUTTON_COUNTER_MASK = GENMASK(15, 13),
++};
++
++enum omnia_ctl_byte_e {
++ OMNIA_CTL_LIGHT_RST = BIT(0),
++ OMNIA_CTL_HARD_RST = BIT(1),
++ /* BIT(2) is currently reserved */
++ OMNIA_CTL_USB30_PWRON = BIT(3),
++ OMNIA_CTL_USB31_PWRON = BIT(4),
++ OMNIA_CTL_ENABLE_4V5 = BIT(5),
++ OMNIA_CTL_BUTTON_MODE = BIT(6),
++ OMNIA_CTL_BOOTLOADER = BIT(7),
++};
++
++enum omnia_features_e {
++ OMNIA_FEAT_PERIPH_MCU = BIT(0),
++ OMNIA_FEAT_EXT_CMDS = BIT(1),
++ OMNIA_FEAT_WDT_PING = BIT(2),
++ OMNIA_FEAT_LED_STATE_EXT_MASK = GENMASK(4, 3),
++ OMNIA_FEAT_LED_STATE_EXT = FIELD_PREP_CONST(OMNIA_FEAT_LED_STATE_EXT_MASK, 1),
++ OMNIA_FEAT_LED_STATE_EXT_V32 = FIELD_PREP_CONST(OMNIA_FEAT_LED_STATE_EXT_MASK, 2),
++ OMNIA_FEAT_LED_GAMMA_CORRECTION = BIT(5),
++ OMNIA_FEAT_NEW_INT_API = BIT(6),
++ OMNIA_FEAT_BOOTLOADER = BIT(7),
++ OMNIA_FEAT_FLASHING = BIT(8),
++ OMNIA_FEAT_NEW_MESSAGE_API = BIT(9),
++ OMNIA_FEAT_BRIGHTNESS_INT = BIT(10),
++ OMNIA_FEAT_POWEROFF_WAKEUP = BIT(11),
++ OMNIA_FEAT_CAN_OLD_MESSAGE_API = BIT(12),
++ OMNIA_FEAT_TRNG = BIT(13),
++ OMNIA_FEAT_CRYPTO = BIT(14),
++ OMNIA_FEAT_BOARD_INFO = BIT(15),
++
++ /*
++ * Orginally the features command replied only 16 bits. If more were
++ * read, either the I2C transaction failed or 0xff bytes were sent.
++ * Therefore to consider bits 16 - 31 valid, one bit (20) was reserved
++ * to be zero.
++ */
++
++ /* Bits 16 - 19 correspond to bits 0 - 3 of status word */
++ OMNIA_FEAT_MCU_TYPE_MASK = GENMASK(17, 16),
++ OMNIA_FEAT_MCU_TYPE_STM32 = FIELD_PREP_CONST(OMNIA_FEAT_MCU_TYPE_MASK, 0),
++ OMNIA_FEAT_MCU_TYPE_GD32 = FIELD_PREP_CONST(OMNIA_FEAT_MCU_TYPE_MASK, 1),
++ OMNIA_FEAT_MCU_TYPE_MKL = FIELD_PREP_CONST(OMNIA_FEAT_MCU_TYPE_MASK, 2),
++ OMNIA_FEAT_FEATURES_SUPPORTED = BIT(18),
++ OMNIA_FEAT_USER_REGULATOR_NOT_SUPPORTED = BIT(19),
++
++ /* must not be set */
++ OMNIA_FEAT_FROM_BIT_16_INVALID = BIT(20),
++
++ OMNIA_FEAT_PER_LED_CORRECTION = BIT(21),
++ OMNIA_FEAT_USB_OVC_PROT_SETTING = BIT(22),
++};
++
++enum omnia_ext_sts_dword_e {
++ OMNIA_EXT_STS_SFP_nDET = BIT(0),
++ OMNIA_EXT_STS_LED_STATES_MASK = GENMASK(31, 12),
++ OMNIA_EXT_STS_WLAN0_MSATA_LED = BIT(12),
++ OMNIA_EXT_STS_WLAN1_LED = BIT(13),
++ OMNIA_EXT_STS_WLAN2_LED = BIT(14),
++ OMNIA_EXT_STS_WPAN0_LED = BIT(15),
++ OMNIA_EXT_STS_WPAN1_LED = BIT(16),
++ OMNIA_EXT_STS_WPAN2_LED = BIT(17),
++ OMNIA_EXT_STS_WAN_LED0 = BIT(18),
++ OMNIA_EXT_STS_WAN_LED1 = BIT(19),
++ OMNIA_EXT_STS_LAN0_LED0 = BIT(20),
++ OMNIA_EXT_STS_LAN0_LED1 = BIT(21),
++ OMNIA_EXT_STS_LAN1_LED0 = BIT(22),
++ OMNIA_EXT_STS_LAN1_LED1 = BIT(23),
++ OMNIA_EXT_STS_LAN2_LED0 = BIT(24),
++ OMNIA_EXT_STS_LAN2_LED1 = BIT(25),
++ OMNIA_EXT_STS_LAN3_LED0 = BIT(26),
++ OMNIA_EXT_STS_LAN3_LED1 = BIT(27),
++ OMNIA_EXT_STS_LAN4_LED0 = BIT(28),
++ OMNIA_EXT_STS_LAN4_LED1 = BIT(29),
++ OMNIA_EXT_STS_LAN5_LED0 = BIT(30),
++ OMNIA_EXT_STS_LAN5_LED1 = BIT(31),
++};
++
++enum omnia_ext_ctl_e {
++ OMNIA_EXT_CTL_nRES_MMC = BIT(0),
++ OMNIA_EXT_CTL_nRES_LAN = BIT(1),
++ OMNIA_EXT_CTL_nRES_PHY = BIT(2),
++ OMNIA_EXT_CTL_nPERST0 = BIT(3),
++ OMNIA_EXT_CTL_nPERST1 = BIT(4),
++ OMNIA_EXT_CTL_nPERST2 = BIT(5),
++ OMNIA_EXT_CTL_PHY_SFP = BIT(6),
++ OMNIA_EXT_CTL_PHY_SFP_AUTO = BIT(7),
++ OMNIA_EXT_CTL_nVHV_CTRL = BIT(8),
++};
++
++enum omnia_int_e {
++ OMNIA_INT_CARD_DET = BIT(0),
++ OMNIA_INT_MSATA_IND = BIT(1),
++ OMNIA_INT_USB30_OVC = BIT(2),
++ OMNIA_INT_USB31_OVC = BIT(3),
++ OMNIA_INT_BUTTON_PRESSED = BIT(4),
++ OMNIA_INT_SFP_nDET = BIT(5),
++ OMNIA_INT_BRIGHTNESS_CHANGED = BIT(6),
++ OMNIA_INT_TRNG = BIT(7),
++ OMNIA_INT_MESSAGE_SIGNED = BIT(8),
++
++ OMNIA_INT_LED_STATES_MASK = GENMASK(31, 12),
++ OMNIA_INT_WLAN0_MSATA_LED = BIT(12),
++ OMNIA_INT_WLAN1_LED = BIT(13),
++ OMNIA_INT_WLAN2_LED = BIT(14),
++ OMNIA_INT_WPAN0_LED = BIT(15),
++ OMNIA_INT_WPAN1_LED = BIT(16),
++ OMNIA_INT_WPAN2_LED = BIT(17),
++ OMNIA_INT_WAN_LED0 = BIT(18),
++ OMNIA_INT_WAN_LED1 = BIT(19),
++ OMNIA_INT_LAN0_LED0 = BIT(20),
++ OMNIA_INT_LAN0_LED1 = BIT(21),
++ OMNIA_INT_LAN1_LED0 = BIT(22),
++ OMNIA_INT_LAN1_LED1 = BIT(23),
++ OMNIA_INT_LAN2_LED0 = BIT(24),
++ OMNIA_INT_LAN2_LED1 = BIT(25),
++ OMNIA_INT_LAN3_LED0 = BIT(26),
++ OMNIA_INT_LAN3_LED1 = BIT(27),
++ OMNIA_INT_LAN4_LED0 = BIT(28),
++ OMNIA_INT_LAN4_LED1 = BIT(29),
++ OMNIA_INT_LAN5_LED0 = BIT(30),
++ OMNIA_INT_LAN5_LED1 = BIT(31),
++};
++
++enum omnia_cmd_poweroff_e {
++ OMNIA_CMD_POWER_OFF_POWERON_BUTTON = BIT(0),
++ OMNIA_CMD_POWER_OFF_MAGIC = 0xdead,
++};
++
++enum omnia_cmd_usb_ovc_prot_e {
++ OMNIA_CMD_xET_USB_OVC_PROT_PORT_MASK = GENMASK(3, 0),
++ OMNIA_CMD_xET_USB_OVC_PROT_ENABLE = BIT(4),
++};
++
++#endif /* __TURRIS_OMNIA_MCU_INTERFACE_H */
diff --git a/target/linux/mvebu/patches-6.6/820-v6.11-03-platform-cznic-turris-omnia-mcu-Add-support-for-MCU-.patch b/target/linux/mvebu/patches-6.6/820-v6.11-03-platform-cznic-turris-omnia-mcu-Add-support-for-MCU-.patch
new file mode 100644
index 0000000000..3309a773a9
--- /dev/null
+++ b/target/linux/mvebu/patches-6.6/820-v6.11-03-platform-cznic-turris-omnia-mcu-Add-support-for-MCU-.patch
@@ -0,0 +1,1311 @@
+From 7f4f2744f9788312e12940b516b51a0a466b137e Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <kabel at kernel.org>
+Date: Mon, 1 Jul 2024 13:30:05 +0200
+Subject: [PATCH 03/11] platform: cznic: turris-omnia-mcu: Add support for MCU
+ connected GPIOs
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Add support for GPIOs connected to the MCU on the Turris Omnia board.
+
+This includes:
+- front button pin
+- enable pins for USB regulators
+- MiniPCIe / mSATA card presence pins in MiniPCIe port 0
+- LED output pins from WAN ethernet PHY, LAN switch and MiniPCIe ports
+- on board revisions 32+ also various peripheral resets and another
+ voltage regulator enable pin
+
+Signed-off-by: Marek Behún <kabel at kernel.org>
+Acked-by: Bartosz Golaszewski <bartosz.golaszewski at linaro.org>
+Link: https://lore.kernel.org/r/20240701113010.16447-4-kabel@kernel.org
+Signed-off-by: Arnd Bergmann <arnd at arndb.de>
+---
+ .../sysfs-bus-i2c-devices-turris-omnia-mcu | 16 +
+ drivers/platform/cznic/Kconfig | 15 +
+ drivers/platform/cznic/Makefile | 1 +
+ .../platform/cznic/turris-omnia-mcu-base.c | 3 +-
+ .../platform/cznic/turris-omnia-mcu-gpio.c | 1094 +++++++++++++++++
+ drivers/platform/cznic/turris-omnia-mcu.h | 68 +
+ 6 files changed, 1196 insertions(+), 1 deletion(-)
+ create mode 100644 drivers/platform/cznic/turris-omnia-mcu-gpio.c
+
+--- a/Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu
++++ b/Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu
+@@ -22,6 +22,22 @@ Description: (RO) Contains device first
+
+ Format: %pM.
+
++What: /sys/bus/i2c/devices/<mcu_device>/front_button_mode
++Date: September 2024
++KernelVersion: 6.11
++Contact: Marek Behún <kabel at kernel.org>
++Description: (RW) The front button on the Turris Omnia router can be
++ configured either to change the intensity of all the LEDs on the
++ front panel, or to send the press event to the CPU as an
++ interrupt.
++
++ This file switches between these two modes:
++ - "mcu" makes the button press event be handled by the MCU to
++ change the LEDs panel intensity.
++ - "cpu" makes the button press event be handled by the CPU.
++
++ Format: %s.
++
+ What: /sys/bus/i2c/devices/<mcu_device>/fw_features
+ Date: September 2024
+ KernelVersion: 6.11
+--- a/drivers/platform/cznic/Kconfig
++++ b/drivers/platform/cznic/Kconfig
+@@ -16,9 +16,24 @@ config TURRIS_OMNIA_MCU
+ tristate "Turris Omnia MCU driver"
+ depends on MACH_ARMADA_38X || COMPILE_TEST
+ depends on I2C
++ select GPIOLIB
++ select GPIOLIB_IRQCHIP
+ help
+ Say Y here to add support for the features implemented by the
+ microcontroller on the CZ.NIC's Turris Omnia SOHO router.
++ The features include:
++ - GPIO pins
++ - to get front button press events (the front button can be
++ configured either to generate press events to the CPU or to change
++ front LEDs panel brightness)
++ - to enable / disable USB port voltage regulators and to detect
++ USB overcurrent
++ - to detect MiniPCIe / mSATA card presence in MiniPCIe port 0
++ - to configure resets of various peripherals on board revisions 32+
++ - to enable / disable the VHV voltage regulator to the SOC in order
++ to be able to program SOC's OTP on board revisions 32+
++ - to get input from the LED output pins of the WAN ethernet PHY, LAN
++ switch and MiniPCIe ports
+ To compile this driver as a module, choose M here; the module will be
+ called turris-omnia-mcu.
+
+--- a/drivers/platform/cznic/Makefile
++++ b/drivers/platform/cznic/Makefile
+@@ -2,3 +2,4 @@
+
+ obj-$(CONFIG_TURRIS_OMNIA_MCU) += turris-omnia-mcu.o
+ turris-omnia-mcu-y := turris-omnia-mcu-base.o
++turris-omnia-mcu-y += turris-omnia-mcu-gpio.o
+--- a/drivers/platform/cznic/turris-omnia-mcu-base.c
++++ b/drivers/platform/cznic/turris-omnia-mcu-base.c
+@@ -196,6 +196,7 @@ static const struct attribute_group omni
+
+ static const struct attribute_group *omnia_mcu_groups[] = {
+ &omnia_mcu_base_group,
++ &omnia_mcu_gpio_group,
+ NULL
+ };
+
+@@ -370,7 +371,7 @@ static int omnia_mcu_probe(struct i2c_cl
+ "Cannot read board info\n");
+ }
+
+- return 0;
++ return omnia_mcu_register_gpiochip(mcu);
+ }
+
+ static const struct of_device_id of_omnia_mcu_match[] = {
+--- /dev/null
++++ b/drivers/platform/cznic/turris-omnia-mcu-gpio.c
+@@ -0,0 +1,1094 @@
++// SPDX-License-Identifier: GPL-2.0
++/*
++ * CZ.NIC's Turris Omnia MCU GPIO and IRQ driver
++ *
++ * 2024 by Marek Behún <kabel at kernel.org>
++ */
++
++#include <linux/bitfield.h>
++#include <linux/bitops.h>
++#include <linux/bug.h>
++#include <linux/cleanup.h>
++#include <linux/device.h>
++#include <linux/devm-helpers.h>
++#include <linux/errno.h>
++#include <linux/gpio/driver.h>
++#include <linux/i2c.h>
++#include <linux/interrupt.h>
++#include <linux/mutex.h>
++#include <linux/sysfs.h>
++#include <linux/types.h>
++#include <linux/workqueue.h>
++#include <asm/unaligned.h>
++
++#include <linux/turris-omnia-mcu-interface.h>
++#include "turris-omnia-mcu.h"
++
++#define OMNIA_CMD_INT_ARG_LEN 8
++#define FRONT_BUTTON_RELEASE_DELAY_MS 50
++
++static const char * const omnia_mcu_gpio_templates[64] = {
++ /* GPIOs with value read from the 16-bit wide status */
++ [4] = "MiniPCIe0 Card Detect",
++ [5] = "MiniPCIe0 mSATA Indicator",
++ [6] = "Front USB3 port over-current",
++ [7] = "Rear USB3 port over-current",
++ [8] = "Front USB3 port power",
++ [9] = "Rear USB3 port power",
++ [12] = "Front Button",
++
++ /* GPIOs with value read from the 32-bit wide extended status */
++ [16] = "SFP nDET",
++ [28] = "MiniPCIe0 LED",
++ [29] = "MiniPCIe1 LED",
++ [30] = "MiniPCIe2 LED",
++ [31] = "MiniPCIe0 PAN LED",
++ [32] = "MiniPCIe1 PAN LED",
++ [33] = "MiniPCIe2 PAN LED",
++ [34] = "WAN PHY LED0",
++ [35] = "WAN PHY LED1",
++ [36] = "LAN switch p0 LED0",
++ [37] = "LAN switch p0 LED1",
++ [38] = "LAN switch p1 LED0",
++ [39] = "LAN switch p1 LED1",
++ [40] = "LAN switch p2 LED0",
++ [41] = "LAN switch p2 LED1",
++ [42] = "LAN switch p3 LED0",
++ [43] = "LAN switch p3 LED1",
++ [44] = "LAN switch p4 LED0",
++ [45] = "LAN switch p4 LED1",
++ [46] = "LAN switch p5 LED0",
++ [47] = "LAN switch p5 LED1",
++
++ /* GPIOs with value read from the 16-bit wide extended control status */
++ [48] = "eMMC nRESET",
++ [49] = "LAN switch nRESET",
++ [50] = "WAN PHY nRESET",
++ [51] = "MiniPCIe0 nPERST",
++ [52] = "MiniPCIe1 nPERST",
++ [53] = "MiniPCIe2 nPERST",
++ [54] = "WAN PHY SFP mux",
++ [56] = "VHV power disable",
++};
++
++struct omnia_gpio {
++ u8 cmd;
++ u8 ctl_cmd;
++ u8 bit;
++ u8 ctl_bit;
++ u8 int_bit;
++ u16 feat;
++ u16 feat_mask;
++};
++
++#define OMNIA_GPIO_INVALID_INT_BIT 0xff
++
++#define _DEF_GPIO(_cmd, _ctl_cmd, _bit, _ctl_bit, _int_bit, _feat, _feat_mask) \
++ { \
++ .cmd = _cmd, \
++ .ctl_cmd = _ctl_cmd, \
++ .bit = _bit, \
++ .ctl_bit = _ctl_bit, \
++ .int_bit = (_int_bit) < 0 ? OMNIA_GPIO_INVALID_INT_BIT \
++ : (_int_bit), \
++ .feat = _feat, \
++ .feat_mask = _feat_mask, \
++ }
++
++#define _DEF_GPIO_STS(_name) \
++ _DEF_GPIO(OMNIA_CMD_GET_STATUS_WORD, 0, __bf_shf(OMNIA_STS_ ## _name), \
++ 0, __bf_shf(OMNIA_INT_ ## _name), 0, 0)
++
++#define _DEF_GPIO_CTL(_name) \
++ _DEF_GPIO(OMNIA_CMD_GET_STATUS_WORD, OMNIA_CMD_GENERAL_CONTROL, \
++ __bf_shf(OMNIA_STS_ ## _name), __bf_shf(OMNIA_CTL_ ## _name), \
++ -1, 0, 0)
++
++#define _DEF_GPIO_EXT_STS(_name, _feat) \
++ _DEF_GPIO(OMNIA_CMD_GET_EXT_STATUS_DWORD, 0, \
++ __bf_shf(OMNIA_EXT_STS_ ## _name), 0, \
++ __bf_shf(OMNIA_INT_ ## _name), \
++ OMNIA_FEAT_ ## _feat | OMNIA_FEAT_EXT_CMDS, \
++ OMNIA_FEAT_ ## _feat | OMNIA_FEAT_EXT_CMDS)
++
++#define _DEF_GPIO_EXT_STS_LED(_name, _ledext) \
++ _DEF_GPIO(OMNIA_CMD_GET_EXT_STATUS_DWORD, 0, \
++ __bf_shf(OMNIA_EXT_STS_ ## _name), 0, \
++ __bf_shf(OMNIA_INT_ ## _name), \
++ OMNIA_FEAT_LED_STATE_ ## _ledext, \
++ OMNIA_FEAT_LED_STATE_EXT_MASK)
++
++#define _DEF_GPIO_EXT_STS_LEDALL(_name) \
++ _DEF_GPIO(OMNIA_CMD_GET_EXT_STATUS_DWORD, 0, \
++ __bf_shf(OMNIA_EXT_STS_ ## _name), 0, \
++ __bf_shf(OMNIA_INT_ ## _name), \
++ OMNIA_FEAT_LED_STATE_EXT_MASK, 0)
++
++#define _DEF_GPIO_EXT_CTL(_name, _feat) \
++ _DEF_GPIO(OMNIA_CMD_GET_EXT_CONTROL_STATUS, OMNIA_CMD_EXT_CONTROL, \
++ __bf_shf(OMNIA_EXT_CTL_ ## _name), \
++ __bf_shf(OMNIA_EXT_CTL_ ## _name), -1, \
++ OMNIA_FEAT_ ## _feat | OMNIA_FEAT_EXT_CMDS, \
++ OMNIA_FEAT_ ## _feat | OMNIA_FEAT_EXT_CMDS)
++
++#define _DEF_INT(_name) \
++ _DEF_GPIO(0, 0, 0, 0, __bf_shf(OMNIA_INT_ ## _name), 0, 0)
++
++static inline bool is_int_bit_valid(const struct omnia_gpio *gpio)
++{
++ return gpio->int_bit != OMNIA_GPIO_INVALID_INT_BIT;
++}
++
++static const struct omnia_gpio omnia_gpios[64] = {
++ /* GPIOs with value read from the 16-bit wide status */
++ [4] = _DEF_GPIO_STS(CARD_DET),
++ [5] = _DEF_GPIO_STS(MSATA_IND),
++ [6] = _DEF_GPIO_STS(USB30_OVC),
++ [7] = _DEF_GPIO_STS(USB31_OVC),
++ [8] = _DEF_GPIO_CTL(USB30_PWRON),
++ [9] = _DEF_GPIO_CTL(USB31_PWRON),
++
++ /* brightness changed interrupt, no GPIO */
++ [11] = _DEF_INT(BRIGHTNESS_CHANGED),
++
++ [12] = _DEF_GPIO_STS(BUTTON_PRESSED),
++
++ /* TRNG interrupt, no GPIO */
++ [13] = _DEF_INT(TRNG),
++
++ /* MESSAGE_SIGNED interrupt, no GPIO */
++ [14] = _DEF_INT(MESSAGE_SIGNED),
++
++ /* GPIOs with value read from the 32-bit wide extended status */
++ [16] = _DEF_GPIO_EXT_STS(SFP_nDET, PERIPH_MCU),
++ [28] = _DEF_GPIO_EXT_STS_LEDALL(WLAN0_MSATA_LED),
++ [29] = _DEF_GPIO_EXT_STS_LEDALL(WLAN1_LED),
++ [30] = _DEF_GPIO_EXT_STS_LEDALL(WLAN2_LED),
++ [31] = _DEF_GPIO_EXT_STS_LED(WPAN0_LED, EXT),
++ [32] = _DEF_GPIO_EXT_STS_LED(WPAN1_LED, EXT),
++ [33] = _DEF_GPIO_EXT_STS_LED(WPAN2_LED, EXT),
++ [34] = _DEF_GPIO_EXT_STS_LEDALL(WAN_LED0),
++ [35] = _DEF_GPIO_EXT_STS_LED(WAN_LED1, EXT_V32),
++ [36] = _DEF_GPIO_EXT_STS_LEDALL(LAN0_LED0),
++ [37] = _DEF_GPIO_EXT_STS_LEDALL(LAN0_LED1),
++ [38] = _DEF_GPIO_EXT_STS_LEDALL(LAN1_LED0),
++ [39] = _DEF_GPIO_EXT_STS_LEDALL(LAN1_LED1),
++ [40] = _DEF_GPIO_EXT_STS_LEDALL(LAN2_LED0),
++ [41] = _DEF_GPIO_EXT_STS_LEDALL(LAN2_LED1),
++ [42] = _DEF_GPIO_EXT_STS_LEDALL(LAN3_LED0),
++ [43] = _DEF_GPIO_EXT_STS_LEDALL(LAN3_LED1),
++ [44] = _DEF_GPIO_EXT_STS_LEDALL(LAN4_LED0),
++ [45] = _DEF_GPIO_EXT_STS_LEDALL(LAN4_LED1),
++ [46] = _DEF_GPIO_EXT_STS_LEDALL(LAN5_LED0),
++ [47] = _DEF_GPIO_EXT_STS_LEDALL(LAN5_LED1),
++
++ /* GPIOs with value read from the 16-bit wide extended control status */
++ [48] = _DEF_GPIO_EXT_CTL(nRES_MMC, PERIPH_MCU),
++ [49] = _DEF_GPIO_EXT_CTL(nRES_LAN, PERIPH_MCU),
++ [50] = _DEF_GPIO_EXT_CTL(nRES_PHY, PERIPH_MCU),
++ [51] = _DEF_GPIO_EXT_CTL(nPERST0, PERIPH_MCU),
++ [52] = _DEF_GPIO_EXT_CTL(nPERST1, PERIPH_MCU),
++ [53] = _DEF_GPIO_EXT_CTL(nPERST2, PERIPH_MCU),
++ [54] = _DEF_GPIO_EXT_CTL(PHY_SFP, PERIPH_MCU),
++ [56] = _DEF_GPIO_EXT_CTL(nVHV_CTRL, PERIPH_MCU),
++};
++
++/* mapping from interrupts to indexes of GPIOs in the omnia_gpios array */
++static const u8 omnia_int_to_gpio_idx[32] = {
++ [__bf_shf(OMNIA_INT_CARD_DET)] = 4,
++ [__bf_shf(OMNIA_INT_MSATA_IND)] = 5,
++ [__bf_shf(OMNIA_INT_USB30_OVC)] = 6,
++ [__bf_shf(OMNIA_INT_USB31_OVC)] = 7,
++ [__bf_shf(OMNIA_INT_BUTTON_PRESSED)] = 12,
++ [__bf_shf(OMNIA_INT_TRNG)] = 13,
++ [__bf_shf(OMNIA_INT_MESSAGE_SIGNED)] = 14,
++ [__bf_shf(OMNIA_INT_SFP_nDET)] = 16,
++ [__bf_shf(OMNIA_INT_BRIGHTNESS_CHANGED)] = 11,
++ [__bf_shf(OMNIA_INT_WLAN0_MSATA_LED)] = 28,
++ [__bf_shf(OMNIA_INT_WLAN1_LED)] = 29,
++ [__bf_shf(OMNIA_INT_WLAN2_LED)] = 30,
++ [__bf_shf(OMNIA_INT_WPAN0_LED)] = 31,
++ [__bf_shf(OMNIA_INT_WPAN1_LED)] = 32,
++ [__bf_shf(OMNIA_INT_WPAN2_LED)] = 33,
++ [__bf_shf(OMNIA_INT_WAN_LED0)] = 34,
++ [__bf_shf(OMNIA_INT_WAN_LED1)] = 35,
++ [__bf_shf(OMNIA_INT_LAN0_LED0)] = 36,
++ [__bf_shf(OMNIA_INT_LAN0_LED1)] = 37,
++ [__bf_shf(OMNIA_INT_LAN1_LED0)] = 38,
++ [__bf_shf(OMNIA_INT_LAN1_LED1)] = 39,
++ [__bf_shf(OMNIA_INT_LAN2_LED0)] = 40,
++ [__bf_shf(OMNIA_INT_LAN2_LED1)] = 41,
++ [__bf_shf(OMNIA_INT_LAN3_LED0)] = 42,
++ [__bf_shf(OMNIA_INT_LAN3_LED1)] = 43,
++ [__bf_shf(OMNIA_INT_LAN4_LED0)] = 44,
++ [__bf_shf(OMNIA_INT_LAN4_LED1)] = 45,
++ [__bf_shf(OMNIA_INT_LAN5_LED0)] = 46,
++ [__bf_shf(OMNIA_INT_LAN5_LED1)] = 47,
++};
++
++/* index of PHY_SFP GPIO in the omnia_gpios array */
++#define OMNIA_GPIO_PHY_SFP_OFFSET 54
++
++static int omnia_ctl_cmd_locked(struct omnia_mcu *mcu, u8 cmd, u16 val, u16 mask)
++{
++ unsigned int len;
++ u8 buf[5];
++
++ buf[0] = cmd;
++
++ switch (cmd) {
++ case OMNIA_CMD_GENERAL_CONTROL:
++ buf[1] = val;
++ buf[2] = mask;
++ len = 3;
++ break;
++
++ case OMNIA_CMD_EXT_CONTROL:
++ put_unaligned_le16(val, &buf[1]);
++ put_unaligned_le16(mask, &buf[3]);
++ len = 5;
++ break;
++
++ default:
++ BUG();
++ }
++
++ return omnia_cmd_write(mcu->client, buf, len);
++}
++
++static int omnia_ctl_cmd(struct omnia_mcu *mcu, u8 cmd, u16 val, u16 mask)
++{
++ guard(mutex)(&mcu->lock);
++
++ return omnia_ctl_cmd_locked(mcu, cmd, val, mask);
++}
++
++static int omnia_gpio_request(struct gpio_chip *gc, unsigned int offset)
++{
++ if (!omnia_gpios[offset].cmd)
++ return -EINVAL;
++
++ return 0;
++}
++
++static int omnia_gpio_get_direction(struct gpio_chip *gc, unsigned int offset)
++{
++ struct omnia_mcu *mcu = gpiochip_get_data(gc);
++
++ if (offset == OMNIA_GPIO_PHY_SFP_OFFSET) {
++ int val;
++
++ scoped_guard(mutex, &mcu->lock) {
++ val = omnia_cmd_read_bit(mcu->client,
++ OMNIA_CMD_GET_EXT_CONTROL_STATUS,
++ OMNIA_EXT_CTL_PHY_SFP_AUTO);
++ if (val < 0)
++ return val;
++ }
++
++ if (val)
++ return GPIO_LINE_DIRECTION_IN;
++
++ return GPIO_LINE_DIRECTION_OUT;
++ }
++
++ if (omnia_gpios[offset].ctl_cmd)
++ return GPIO_LINE_DIRECTION_OUT;
++
++ return GPIO_LINE_DIRECTION_IN;
++}
++
++static int omnia_gpio_direction_input(struct gpio_chip *gc, unsigned int offset)
++{
++ const struct omnia_gpio *gpio = &omnia_gpios[offset];
++ struct omnia_mcu *mcu = gpiochip_get_data(gc);
++
++ if (offset == OMNIA_GPIO_PHY_SFP_OFFSET)
++ return omnia_ctl_cmd(mcu, OMNIA_CMD_EXT_CONTROL,
++ OMNIA_EXT_CTL_PHY_SFP_AUTO,
++ OMNIA_EXT_CTL_PHY_SFP_AUTO);
++
++ if (gpio->ctl_cmd)
++ return -ENOTSUPP;
++
++ return 0;
++}
++
++static int omnia_gpio_direction_output(struct gpio_chip *gc,
++ unsigned int offset, int value)
++{
++ const struct omnia_gpio *gpio = &omnia_gpios[offset];
++ struct omnia_mcu *mcu = gpiochip_get_data(gc);
++ u16 val, mask;
++
++ if (!gpio->ctl_cmd)
++ return -ENOTSUPP;
++
++ mask = BIT(gpio->ctl_bit);
++ val = value ? mask : 0;
++
++ if (offset == OMNIA_GPIO_PHY_SFP_OFFSET)
++ mask |= OMNIA_EXT_CTL_PHY_SFP_AUTO;
++
++ return omnia_ctl_cmd(mcu, gpio->ctl_cmd, val, mask);
++}
++
++static int omnia_gpio_get(struct gpio_chip *gc, unsigned int offset)
++{
++ const struct omnia_gpio *gpio = &omnia_gpios[offset];
++ struct omnia_mcu *mcu = gpiochip_get_data(gc);
++
++ /*
++ * If firmware does not support the new interrupt API, we are informed
++ * of every change of the status word by an interrupt from MCU and save
++ * its value in the interrupt service routine. Simply return the saved
++ * value.
++ */
++ if (gpio->cmd == OMNIA_CMD_GET_STATUS_WORD &&
++ !(mcu->features & OMNIA_FEAT_NEW_INT_API))
++ return test_bit(gpio->bit, &mcu->last_status);
++
++ guard(mutex)(&mcu->lock);
++
++ /*
++ * If firmware does support the new interrupt API, we may have cached
++ * the value of a GPIO in the interrupt service routine. If not, read
++ * the relevant bit now.
++ */
++ if (is_int_bit_valid(gpio) && test_bit(gpio->int_bit, &mcu->is_cached))
++ return test_bit(gpio->int_bit, &mcu->cached);
++
++ return omnia_cmd_read_bit(mcu->client, gpio->cmd, BIT(gpio->bit));
++}
++
++static unsigned long *
++_relevant_field_for_sts_cmd(u8 cmd, unsigned long *sts, unsigned long *ext_sts,
++ unsigned long *ext_ctl)
++{
++ switch (cmd) {
++ case OMNIA_CMD_GET_STATUS_WORD:
++ return sts;
++ case OMNIA_CMD_GET_EXT_STATUS_DWORD:
++ return ext_sts;
++ case OMNIA_CMD_GET_EXT_CONTROL_STATUS:
++ return ext_ctl;
++ default:
++ return NULL;
++ }
++}
++
++static int omnia_gpio_get_multiple(struct gpio_chip *gc, unsigned long *mask,
++ unsigned long *bits)
++{
++ unsigned long sts = 0, ext_sts = 0, ext_ctl = 0, *field;
++ struct omnia_mcu *mcu = gpiochip_get_data(gc);
++ struct i2c_client *client = mcu->client;
++ unsigned int i;
++ int err;
++
++ /* determine which bits to read from the 3 possible commands */
++ for_each_set_bit(i, mask, ARRAY_SIZE(omnia_gpios)) {
++ field = _relevant_field_for_sts_cmd(omnia_gpios[i].cmd,
++ &sts, &ext_sts, &ext_ctl);
++ if (!field)
++ continue;
++
++ __set_bit(omnia_gpios[i].bit, field);
++ }
++
++ guard(mutex)(&mcu->lock);
++
++ if (mcu->features & OMNIA_FEAT_NEW_INT_API) {
++ /* read relevant bits from status */
++ err = omnia_cmd_read_bits(client, OMNIA_CMD_GET_STATUS_WORD,
++ sts, &sts);
++ if (err)
++ return err;
++ } else {
++ /*
++ * Use status word value cached in the interrupt service routine
++ * if firmware does not support the new interrupt API.
++ */
++ sts = mcu->last_status;
++ }
++
++ /* read relevant bits from extended status */
++ err = omnia_cmd_read_bits(client, OMNIA_CMD_GET_EXT_STATUS_DWORD,
++ ext_sts, &ext_sts);
++ if (err)
++ return err;
++
++ /* read relevant bits from extended control */
++ err = omnia_cmd_read_bits(client, OMNIA_CMD_GET_EXT_CONTROL_STATUS,
++ ext_ctl, &ext_ctl);
++ if (err)
++ return err;
++
++ /* assign relevant bits in result */
++ for_each_set_bit(i, mask, ARRAY_SIZE(omnia_gpios)) {
++ field = _relevant_field_for_sts_cmd(omnia_gpios[i].cmd,
++ &sts, &ext_sts, &ext_ctl);
++ if (!field)
++ continue;
++
++ __assign_bit(i, bits, test_bit(omnia_gpios[i].bit, field));
++ }
++
++ return 0;
++}
++
++static void omnia_gpio_set(struct gpio_chip *gc, unsigned int offset, int value)
++{
++ const struct omnia_gpio *gpio = &omnia_gpios[offset];
++ struct omnia_mcu *mcu = gpiochip_get_data(gc);
++ u16 val, mask;
++
++ if (!gpio->ctl_cmd)
++ return;
++
++ mask = BIT(gpio->ctl_bit);
++ val = value ? mask : 0;
++
++ omnia_ctl_cmd(mcu, gpio->ctl_cmd, val, mask);
++}
++
++static void omnia_gpio_set_multiple(struct gpio_chip *gc, unsigned long *mask,
++ unsigned long *bits)
++{
++ unsigned long ctl = 0, ctl_mask = 0, ext_ctl = 0, ext_ctl_mask = 0;
++ struct omnia_mcu *mcu = gpiochip_get_data(gc);
++ unsigned int i;
++
++ for_each_set_bit(i, mask, ARRAY_SIZE(omnia_gpios)) {
++ unsigned long *field, *field_mask;
++ u8 bit = omnia_gpios[i].ctl_bit;
++
++ switch (omnia_gpios[i].ctl_cmd) {
++ case OMNIA_CMD_GENERAL_CONTROL:
++ field = &ctl;
++ field_mask = &ctl_mask;
++ break;
++ case OMNIA_CMD_EXT_CONTROL:
++ field = &ext_ctl;
++ field_mask = &ext_ctl_mask;
++ break;
++ default:
++ field = field_mask = NULL;
++ break;
++ }
++
++ if (!field)
++ continue;
++
++ __set_bit(bit, field_mask);
++ __assign_bit(bit, field, test_bit(i, bits));
++ }
++
++ guard(mutex)(&mcu->lock);
++
++ if (ctl_mask)
++ omnia_ctl_cmd_locked(mcu, OMNIA_CMD_GENERAL_CONTROL,
++ ctl, ctl_mask);
++
++ if (ext_ctl_mask)
++ omnia_ctl_cmd_locked(mcu, OMNIA_CMD_EXT_CONTROL,
++ ext_ctl, ext_ctl_mask);
++}
++
++static bool omnia_gpio_available(struct omnia_mcu *mcu,
++ const struct omnia_gpio *gpio)
++{
++ if (gpio->feat_mask)
++ return (mcu->features & gpio->feat_mask) == gpio->feat;
++
++ if (gpio->feat)
++ return mcu->features & gpio->feat;
++
++ return true;
++}
++
++static int omnia_gpio_init_valid_mask(struct gpio_chip *gc,
++ unsigned long *valid_mask,
++ unsigned int ngpios)
++{
++ struct omnia_mcu *mcu = gpiochip_get_data(gc);
++
++ for (unsigned int i = 0; i < ngpios; i++) {
++ const struct omnia_gpio *gpio = &omnia_gpios[i];
++
++ if (gpio->cmd || is_int_bit_valid(gpio))
++ __assign_bit(i, valid_mask,
++ omnia_gpio_available(mcu, gpio));
++ else
++ __clear_bit(i, valid_mask);
++ }
++
++ return 0;
++}
++
++static int omnia_gpio_of_xlate(struct gpio_chip *gc,
++ const struct of_phandle_args *gpiospec,
++ u32 *flags)
++{
++ u32 bank, gpio;
++
++ if (WARN_ON(gpiospec->args_count != 3))
++ return -EINVAL;
++
++ if (flags)
++ *flags = gpiospec->args[2];
++
++ bank = gpiospec->args[0];
++ gpio = gpiospec->args[1];
++
++ switch (bank) {
++ case 0:
++ return gpio < 16 ? gpio : -EINVAL;
++ case 1:
++ return gpio < 32 ? 16 + gpio : -EINVAL;
++ case 2:
++ return gpio < 16 ? 48 + gpio : -EINVAL;
++ default:
++ return -EINVAL;
++ }
++}
++
++static void omnia_irq_shutdown(struct irq_data *d)
++{
++ struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
++ struct omnia_mcu *mcu = gpiochip_get_data(gc);
++ irq_hw_number_t hwirq = irqd_to_hwirq(d);
++ u8 bit = omnia_gpios[hwirq].int_bit;
++
++ __clear_bit(bit, &mcu->rising);
++ __clear_bit(bit, &mcu->falling);
++}
++
++static void omnia_irq_mask(struct irq_data *d)
++{
++ struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
++ struct omnia_mcu *mcu = gpiochip_get_data(gc);
++ irq_hw_number_t hwirq = irqd_to_hwirq(d);
++ u8 bit = omnia_gpios[hwirq].int_bit;
++
++ if (!omnia_gpios[hwirq].cmd)
++ __clear_bit(bit, &mcu->rising);
++ __clear_bit(bit, &mcu->mask);
++ gpiochip_disable_irq(gc, hwirq);
++}
++
++static void omnia_irq_unmask(struct irq_data *d)
++{
++ struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
++ struct omnia_mcu *mcu = gpiochip_get_data(gc);
++ irq_hw_number_t hwirq = irqd_to_hwirq(d);
++ u8 bit = omnia_gpios[hwirq].int_bit;
++
++ gpiochip_enable_irq(gc, hwirq);
++ __set_bit(bit, &mcu->mask);
++ if (!omnia_gpios[hwirq].cmd)
++ __set_bit(bit, &mcu->rising);
++}
++
++static int omnia_irq_set_type(struct irq_data *d, unsigned int type)
++{
++ struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
++ struct omnia_mcu *mcu = gpiochip_get_data(gc);
++ irq_hw_number_t hwirq = irqd_to_hwirq(d);
++ struct device *dev = &mcu->client->dev;
++ u8 bit = omnia_gpios[hwirq].int_bit;
++
++ if (!(type & IRQ_TYPE_EDGE_BOTH)) {
++ dev_err(dev, "irq %u: unsupported type %u\n", d->irq, type);
++ return -EINVAL;
++ }
++
++ __assign_bit(bit, &mcu->rising, type & IRQ_TYPE_EDGE_RISING);
++ __assign_bit(bit, &mcu->falling, type & IRQ_TYPE_EDGE_FALLING);
++
++ return 0;
++}
++
++static void omnia_irq_bus_lock(struct irq_data *d)
++{
++ struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
++ struct omnia_mcu *mcu = gpiochip_get_data(gc);
++
++ /* nothing to do if MCU firmware does not support new interrupt API */
++ if (!(mcu->features & OMNIA_FEAT_NEW_INT_API))
++ return;
++
++ mutex_lock(&mcu->lock);
++}
++
++/**
++ * omnia_mask_interleave - Interleaves the bytes from @rising and @falling
++ * @dst: the destination u8 array of interleaved bytes
++ * @rising: rising mask
++ * @falling: falling mask
++ *
++ * Interleaves the little-endian bytes from @rising and @falling words.
++ *
++ * If @rising = (r0, r1, r2, r3) and @falling = (f0, f1, f2, f3), the result is
++ * @dst = (r0, f0, r1, f1, r2, f2, r3, f3).
++ *
++ * The MCU receives an interrupt mask and reports a pending interrupt bitmap in
++ * this interleaved format. The rationale behind this is that the low-indexed
++ * bits are more important - in many cases, the user will be interested only in
++ * interrupts with indexes 0 to 7, and so the system can stop reading after
++ * first 2 bytes (r0, f0), to save time on the slow I2C bus.
++ *
++ * Feel free to remove this function and its inverse, omnia_mask_deinterleave,
++ * and use an appropriate bitmap_*() function once such a function exists.
++ */
++static void
++omnia_mask_interleave(u8 *dst, unsigned long rising, unsigned long falling)
++{
++ for (unsigned int i = 0; i < sizeof(u32); i++) {
++ dst[2 * i] = rising >> (8 * i);
++ dst[2 * i + 1] = falling >> (8 * i);
++ }
++}
++
++/**
++ * omnia_mask_deinterleave - Deinterleaves the bytes into @rising and @falling
++ * @src: the source u8 array containing the interleaved bytes
++ * @rising: pointer where to store the rising mask gathered from @src
++ * @falling: pointer where to store the falling mask gathered from @src
++ *
++ * This is the inverse function to omnia_mask_interleave.
++ */
++static void omnia_mask_deinterleave(const u8 *src, unsigned long *rising,
++ unsigned long *falling)
++{
++ *rising = *falling = 0;
++
++ for (unsigned int i = 0; i < sizeof(u32); i++) {
++ *rising |= src[2 * i] << (8 * i);
++ *falling |= src[2 * i + 1] << (8 * i);
++ }
++}
++
++static void omnia_irq_bus_sync_unlock(struct irq_data *d)
++{
++ struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
++ struct omnia_mcu *mcu = gpiochip_get_data(gc);
++ struct device *dev = &mcu->client->dev;
++ u8 cmd[1 + OMNIA_CMD_INT_ARG_LEN];
++ unsigned long rising, falling;
++ int err;
++
++ /* nothing to do if MCU firmware does not support new interrupt API */
++ if (!(mcu->features & OMNIA_FEAT_NEW_INT_API))
++ return;
++
++ cmd[0] = OMNIA_CMD_SET_INT_MASK;
++
++ rising = mcu->rising & mcu->mask;
++ falling = mcu->falling & mcu->mask;
++
++ /* interleave the rising and falling bytes into the command arguments */
++ omnia_mask_interleave(&cmd[1], rising, falling);
++
++ dev_dbg(dev, "set int mask %8ph\n", &cmd[1]);
++
++ err = omnia_cmd_write(mcu->client, cmd, sizeof(cmd));
++ if (err) {
++ dev_err(dev, "Cannot set mask: %d\n", err);
++ goto unlock;
++ }
++
++ /*
++ * Remember which GPIOs have both rising and falling interrupts enabled.
++ * For those we will cache their value so that .get() method is faster.
++ * We also need to forget cached values of GPIOs that aren't cached
++ * anymore.
++ */
++ mcu->both = rising & falling;
++ mcu->is_cached &= mcu->both;
++
++unlock:
++ mutex_unlock(&mcu->lock);
++}
++
++static const struct irq_chip omnia_mcu_irq_chip = {
++ .name = "Turris Omnia MCU interrupts",
++ .irq_shutdown = omnia_irq_shutdown,
++ .irq_mask = omnia_irq_mask,
++ .irq_unmask = omnia_irq_unmask,
++ .irq_set_type = omnia_irq_set_type,
++ .irq_bus_lock = omnia_irq_bus_lock,
++ .irq_bus_sync_unlock = omnia_irq_bus_sync_unlock,
++ .flags = IRQCHIP_IMMUTABLE,
++ GPIOCHIP_IRQ_RESOURCE_HELPERS,
++};
++
++static void omnia_irq_init_valid_mask(struct gpio_chip *gc,
++ unsigned long *valid_mask,
++ unsigned int ngpios)
++{
++ struct omnia_mcu *mcu = gpiochip_get_data(gc);
++
++ for (unsigned int i = 0; i < ngpios; i++) {
++ const struct omnia_gpio *gpio = &omnia_gpios[i];
++
++ if (is_int_bit_valid(gpio))
++ __assign_bit(i, valid_mask,
++ omnia_gpio_available(mcu, gpio));
++ else
++ __clear_bit(i, valid_mask);
++ }
++}
++
++static int omnia_irq_init_hw(struct gpio_chip *gc)
++{
++ struct omnia_mcu *mcu = gpiochip_get_data(gc);
++ u8 cmd[1 + OMNIA_CMD_INT_ARG_LEN] = {};
++
++ cmd[0] = OMNIA_CMD_SET_INT_MASK;
++
++ return omnia_cmd_write(mcu->client, cmd, sizeof(cmd));
++}
++
++/*
++ * Determine how many bytes we need to read from the reply to the
++ * OMNIA_CMD_GET_INT_AND_CLEAR command in order to retrieve all unmasked
++ * interrupts.
++ */
++static unsigned int
++omnia_irq_compute_pending_length(unsigned long rising, unsigned long falling)
++{
++ return max(omnia_compute_reply_length(rising, true, 0),
++ omnia_compute_reply_length(falling, true, 1));
++}
++
++static bool omnia_irq_read_pending_new(struct omnia_mcu *mcu,
++ unsigned long *pending)
++{
++ struct device *dev = &mcu->client->dev;
++ u8 reply[OMNIA_CMD_INT_ARG_LEN] = {};
++ unsigned long rising, falling;
++ unsigned int len;
++ int err;
++
++ len = omnia_irq_compute_pending_length(mcu->rising & mcu->mask,
++ mcu->falling & mcu->mask);
++ if (!len)
++ return false;
++
++ guard(mutex)(&mcu->lock);
++
++ err = omnia_cmd_read(mcu->client, OMNIA_CMD_GET_INT_AND_CLEAR, reply,
++ len);
++ if (err) {
++ dev_err(dev, "Cannot read pending IRQs: %d\n", err);
++ return false;
++ }
++
++ /* deinterleave the reply bytes into rising and falling */
++ omnia_mask_deinterleave(reply, &rising, &falling);
++
++ rising &= mcu->mask;
++ falling &= mcu->mask;
++ *pending = rising | falling;
++
++ /* cache values for GPIOs that have both edges enabled */
++ mcu->is_cached &= ~(rising & falling);
++ mcu->is_cached |= mcu->both & (rising ^ falling);
++ mcu->cached = (mcu->cached | rising) & ~falling;
++
++ return true;
++}
++
++static int omnia_read_status_word_old_fw(struct omnia_mcu *mcu,
++ unsigned long *status)
++{
++ u16 raw_status;
++ int err;
++
++ err = omnia_cmd_read_u16(mcu->client, OMNIA_CMD_GET_STATUS_WORD,
++ &raw_status);
++ if (err)
++ return err;
++
++ /*
++ * Old firmware has a bug wherein it never resets the USB port
++ * overcurrent bits back to zero. Ignore them.
++ */
++ *status = raw_status & ~(OMNIA_STS_USB30_OVC | OMNIA_STS_USB31_OVC);
++
++ return 0;
++}
++
++static void button_release_emul_fn(struct work_struct *work)
++{
++ struct omnia_mcu *mcu = container_of(to_delayed_work(work),
++ struct omnia_mcu,
++ button_release_emul_work);
++
++ mcu->button_pressed_emul = false;
++ generic_handle_irq_safe(mcu->client->irq);
++}
++
++static void
++fill_int_from_sts(unsigned long *rising, unsigned long *falling,
++ unsigned long rising_sts, unsigned long falling_sts,
++ unsigned long sts_bit, unsigned long int_bit)
++{
++ if (rising_sts & sts_bit)
++ *rising |= int_bit;
++ if (falling_sts & sts_bit)
++ *falling |= int_bit;
++}
++
++static bool omnia_irq_read_pending_old(struct omnia_mcu *mcu,
++ unsigned long *pending)
++{
++ unsigned long status, rising_sts, falling_sts, rising, falling;
++ struct device *dev = &mcu->client->dev;
++ int err;
++
++ guard(mutex)(&mcu->lock);
++
++ err = omnia_read_status_word_old_fw(mcu, &status);
++ if (err) {
++ dev_err(dev, "Cannot read pending IRQs: %d\n", err);
++ return false;
++ }
++
++ /*
++ * The old firmware triggers an interrupt whenever status word changes,
++ * but does not inform about which bits rose or fell. We need to compute
++ * this here by comparing with the last status word value.
++ *
++ * The OMNIA_STS_BUTTON_PRESSED bit needs special handling, because the
++ * old firmware clears the OMNIA_STS_BUTTON_PRESSED bit on successful
++ * completion of the OMNIA_CMD_GET_STATUS_WORD command, resulting in
++ * another interrupt:
++ * - first we get an interrupt, we read the status word where
++ * OMNIA_STS_BUTTON_PRESSED is present,
++ * - MCU clears the OMNIA_STS_BUTTON_PRESSED bit because we read the
++ * status word,
++ * - we get another interrupt because the status word changed again
++ * (the OMNIA_STS_BUTTON_PRESSED bit was cleared).
++ *
++ * The gpiolib-cdev, gpiolib-sysfs and gpio-keys input driver all call
++ * the gpiochip's .get() method after an edge event on a requested GPIO
++ * occurs.
++ *
++ * We ensure that the .get() method reads 1 for the button GPIO for some
++ * time.
++ */
++
++ if (status & OMNIA_STS_BUTTON_PRESSED) {
++ mcu->button_pressed_emul = true;
++ mod_delayed_work(system_wq, &mcu->button_release_emul_work,
++ msecs_to_jiffies(FRONT_BUTTON_RELEASE_DELAY_MS));
++ } else if (mcu->button_pressed_emul) {
++ status |= OMNIA_STS_BUTTON_PRESSED;
++ }
++
++ rising_sts = ~mcu->last_status & status;
++ falling_sts = mcu->last_status & ~status;
++
++ mcu->last_status = status;
++
++ /*
++ * Fill in the relevant interrupt bits from status bits for CARD_DET,
++ * MSATA_IND and BUTTON_PRESSED.
++ */
++ rising = 0;
++ falling = 0;
++ fill_int_from_sts(&rising, &falling, rising_sts, falling_sts,
++ OMNIA_STS_CARD_DET, OMNIA_INT_CARD_DET);
++ fill_int_from_sts(&rising, &falling, rising_sts, falling_sts,
++ OMNIA_STS_MSATA_IND, OMNIA_INT_MSATA_IND);
++ fill_int_from_sts(&rising, &falling, rising_sts, falling_sts,
++ OMNIA_STS_BUTTON_PRESSED, OMNIA_INT_BUTTON_PRESSED);
++
++ /* Use only bits that are enabled */
++ rising &= mcu->rising & mcu->mask;
++ falling &= mcu->falling & mcu->mask;
++ *pending = rising | falling;
++
++ return true;
++}
++
++static bool omnia_irq_read_pending(struct omnia_mcu *mcu,
++ unsigned long *pending)
++{
++ if (mcu->features & OMNIA_FEAT_NEW_INT_API)
++ return omnia_irq_read_pending_new(mcu, pending);
++ else
++ return omnia_irq_read_pending_old(mcu, pending);
++}
++
++static irqreturn_t omnia_irq_thread_handler(int irq, void *dev_id)
++{
++ struct omnia_mcu *mcu = dev_id;
++ struct irq_domain *domain;
++ unsigned long pending;
++ unsigned int i;
++
++ if (!omnia_irq_read_pending(mcu, &pending))
++ return IRQ_NONE;
++
++ domain = mcu->gc.irq.domain;
++
++ for_each_set_bit(i, &pending, 32) {
++ unsigned int nested_irq;
++
++ nested_irq = irq_find_mapping(domain, omnia_int_to_gpio_idx[i]);
++
++ handle_nested_irq(nested_irq);
++ }
++
++ return IRQ_RETVAL(pending);
++}
++
++static const char * const front_button_modes[] = { "mcu", "cpu" };
++
++static ssize_t front_button_mode_show(struct device *dev,
++ struct device_attribute *a, char *buf)
++{
++ struct omnia_mcu *mcu = dev_get_drvdata(dev);
++ int val;
++
++ if (mcu->features & OMNIA_FEAT_NEW_INT_API) {
++ val = omnia_cmd_read_bit(mcu->client, OMNIA_CMD_GET_STATUS_WORD,
++ OMNIA_STS_BUTTON_MODE);
++ if (val < 0)
++ return val;
++ } else {
++ val = !!(mcu->last_status & OMNIA_STS_BUTTON_MODE);
++ }
++
++ return sysfs_emit(buf, "%s\n", front_button_modes[val]);
++}
++
++static ssize_t front_button_mode_store(struct device *dev,
++ struct device_attribute *a,
++ const char *buf, size_t count)
++{
++ struct omnia_mcu *mcu = dev_get_drvdata(dev);
++ int err, i;
++
++ i = sysfs_match_string(front_button_modes, buf);
++ if (i < 0)
++ return i;
++
++ err = omnia_ctl_cmd_locked(mcu, OMNIA_CMD_GENERAL_CONTROL,
++ i ? OMNIA_CTL_BUTTON_MODE : 0,
++ OMNIA_CTL_BUTTON_MODE);
++ if (err)
++ return err;
++
++ return count;
++}
++static DEVICE_ATTR_RW(front_button_mode);
++
++static struct attribute *omnia_mcu_gpio_attrs[] = {
++ &dev_attr_front_button_mode.attr,
++ NULL
++};
++
++const struct attribute_group omnia_mcu_gpio_group = {
++ .attrs = omnia_mcu_gpio_attrs,
++};
++
++int omnia_mcu_register_gpiochip(struct omnia_mcu *mcu)
++{
++ bool new_api = mcu->features & OMNIA_FEAT_NEW_INT_API;
++ struct device *dev = &mcu->client->dev;
++ unsigned long irqflags;
++ int err;
++
++ err = devm_mutex_init(dev, &mcu->lock);
++ if (err)
++ return err;
++
++ mcu->gc.request = omnia_gpio_request;
++ mcu->gc.get_direction = omnia_gpio_get_direction;
++ mcu->gc.direction_input = omnia_gpio_direction_input;
++ mcu->gc.direction_output = omnia_gpio_direction_output;
++ mcu->gc.get = omnia_gpio_get;
++ mcu->gc.get_multiple = omnia_gpio_get_multiple;
++ mcu->gc.set = omnia_gpio_set;
++ mcu->gc.set_multiple = omnia_gpio_set_multiple;
++ mcu->gc.init_valid_mask = omnia_gpio_init_valid_mask;
++ mcu->gc.can_sleep = true;
++ mcu->gc.names = omnia_mcu_gpio_templates;
++ mcu->gc.base = -1;
++ mcu->gc.ngpio = ARRAY_SIZE(omnia_gpios);
++ mcu->gc.label = "Turris Omnia MCU GPIOs";
++ mcu->gc.parent = dev;
++ mcu->gc.owner = THIS_MODULE;
++ mcu->gc.of_gpio_n_cells = 3;
++ mcu->gc.of_xlate = omnia_gpio_of_xlate;
++
++ gpio_irq_chip_set_chip(&mcu->gc.irq, &omnia_mcu_irq_chip);
++ /* This will let us handle the parent IRQ in the driver */
++ mcu->gc.irq.parent_handler = NULL;
++ mcu->gc.irq.num_parents = 0;
++ mcu->gc.irq.parents = NULL;
++ mcu->gc.irq.default_type = IRQ_TYPE_NONE;
++ mcu->gc.irq.handler = handle_bad_irq;
++ mcu->gc.irq.threaded = true;
++ if (new_api)
++ mcu->gc.irq.init_hw = omnia_irq_init_hw;
++ mcu->gc.irq.init_valid_mask = omnia_irq_init_valid_mask;
++
++ err = devm_gpiochip_add_data(dev, &mcu->gc, mcu);
++ if (err)
++ return dev_err_probe(dev, err, "Cannot add GPIO chip\n");
++
++ /*
++ * Before requesting the interrupt, if firmware does not support the new
++ * interrupt API, we need to cache the value of the status word, so that
++ * when it changes, we may compare the new value with the cached one in
++ * the interrupt handler.
++ */
++ if (!new_api) {
++ err = omnia_read_status_word_old_fw(mcu, &mcu->last_status);
++ if (err)
++ return dev_err_probe(dev, err,
++ "Cannot read status word\n");
++
++ INIT_DELAYED_WORK(&mcu->button_release_emul_work,
++ button_release_emul_fn);
++ }
++
++ irqflags = IRQF_ONESHOT;
++ if (new_api)
++ irqflags |= IRQF_TRIGGER_LOW;
++ else
++ irqflags |= IRQF_TRIGGER_FALLING;
++
++ err = devm_request_threaded_irq(dev, mcu->client->irq, NULL,
++ omnia_irq_thread_handler, irqflags,
++ "turris-omnia-mcu", mcu);
++ if (err)
++ return dev_err_probe(dev, err, "Cannot request IRQ\n");
++
++ if (!new_api) {
++ /*
++ * The button_release_emul_work has to be initialized before the
++ * thread is requested, and on driver remove it needs to be
++ * canceled before the thread is freed. Therefore we can't use
++ * devm_delayed_work_autocancel() directly, because the order
++ * devm_delayed_work_autocancel();
++ * devm_request_threaded_irq();
++ * would cause improper release order:
++ * free_irq();
++ * cancel_delayed_work_sync();
++ * Instead we first initialize the work above, and only now
++ * after IRQ is requested we add the work devm action.
++ */
++ err = devm_add_action(dev, devm_delayed_work_drop,
++ &mcu->button_release_emul_work);
++ if (err)
++ return err;
++ }
++
++ return 0;
++}
+--- a/drivers/platform/cznic/turris-omnia-mcu.h
++++ b/drivers/platform/cznic/turris-omnia-mcu.h
+@@ -8,8 +8,12 @@
+ #ifndef __TURRIS_OMNIA_MCU_H
+ #define __TURRIS_OMNIA_MCU_H
+
++#include <linux/bitops.h>
++#include <linux/gpio/driver.h>
+ #include <linux/if_ether.h>
++#include <linux/mutex.h>
+ #include <linux/types.h>
++#include <linux/workqueue.h>
+ #include <asm/byteorder.h>
+
+ struct i2c_client;
+@@ -23,18 +27,78 @@ struct omnia_mcu {
+ u64 board_serial_number;
+ u8 board_first_mac[ETH_ALEN];
+ u8 board_revision;
++
++ /* GPIO chip */
++ struct gpio_chip gc;
++ struct mutex lock;
++ unsigned long mask, rising, falling, both, cached, is_cached;
++ /* Old MCU firmware handling needs the following */
++ struct delayed_work button_release_emul_work;
++ unsigned long last_status;
++ bool button_pressed_emul;
+ };
+
+ int omnia_cmd_write_read(const struct i2c_client *client,
+ void *cmd, unsigned int cmd_len,
+ void *reply, unsigned int reply_len);
+
++static inline int omnia_cmd_write(const struct i2c_client *client, void *cmd,
++ unsigned int len)
++{
++ return omnia_cmd_write_read(client, cmd, len, NULL, 0);
++}
++
+ static inline int omnia_cmd_read(const struct i2c_client *client, u8 cmd,
+ void *reply, unsigned int len)
+ {
+ return omnia_cmd_write_read(client, &cmd, 1, reply, len);
+ }
+
++static inline unsigned int
++omnia_compute_reply_length(unsigned long mask, bool interleaved,
++ unsigned int offset)
++{
++ if (!mask)
++ return 0;
++
++ return ((__fls(mask) >> 3) << interleaved) + 1 + offset;
++}
++
++/* Returns 0 on success */
++static inline int omnia_cmd_read_bits(const struct i2c_client *client, u8 cmd,
++ unsigned long bits, unsigned long *dst)
++{
++ __le32 reply;
++ int err;
++
++ if (!bits) {
++ *dst = 0;
++ return 0;
++ }
++
++ err = omnia_cmd_read(client, cmd, &reply,
++ omnia_compute_reply_length(bits, false, 0));
++ if (err)
++ return err;
++
++ *dst = le32_to_cpu(reply) & bits;
++
++ return 0;
++}
++
++static inline int omnia_cmd_read_bit(const struct i2c_client *client, u8 cmd,
++ unsigned long bit)
++{
++ unsigned long reply;
++ int err;
++
++ err = omnia_cmd_read_bits(client, cmd, bit, &reply);
++ if (err)
++ return err;
++
++ return !!reply;
++}
++
+ static inline int omnia_cmd_read_u32(const struct i2c_client *client, u8 cmd,
+ u32 *dst)
+ {
+@@ -71,4 +135,8 @@ static inline int omnia_cmd_read_u8(cons
+ return omnia_cmd_read(client, cmd, reply, sizeof(*reply));
+ }
+
++extern const struct attribute_group omnia_mcu_gpio_group;
++
++int omnia_mcu_register_gpiochip(struct omnia_mcu *mcu);
++
+ #endif /* __TURRIS_OMNIA_MCU_H */
diff --git a/target/linux/mvebu/patches-6.6/820-v6.11-04-platform-cznic-turris-omnia-mcu-Add-support-for-powe.patch b/target/linux/mvebu/patches-6.6/820-v6.11-04-platform-cznic-turris-omnia-mcu-Add-support-for-powe.patch
new file mode 100644
index 0000000000..2ef6242d70
--- /dev/null
+++ b/target/linux/mvebu/patches-6.6/820-v6.11-04-platform-cznic-turris-omnia-mcu-Add-support-for-powe.patch
@@ -0,0 +1,415 @@
+From f69e0a731ab471f3a57c48258ad2d9990820c173 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <kabel at kernel.org>
+Date: Mon, 1 Jul 2024 13:30:06 +0200
+Subject: [PATCH 04/11] platform: cznic: turris-omnia-mcu: Add support for
+ poweroff and wakeup
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Add support for true board poweroff (MCU can disable all unnecessary
+voltage regulators) and wakeup at a specified time, implemented via a
+RTC driver so that the rtcwake utility can be used to configure it.
+
+Signed-off-by: Marek Behún <kabel at kernel.org>
+Reviewed-by: Andy Shevchenko <andy at kernel.org>
+Acked-by: Alexandre Belloni <alexandre.belloni at bootlin.com>
+Acked-by: Bartosz Golaszewski <bartosz.golaszewski at linaro.org>
+Link: https://lore.kernel.org/r/20240701113010.16447-5-kabel@kernel.org
+Signed-off-by: Arnd Bergmann <arnd at arndb.de>
+---
+ .../sysfs-bus-i2c-devices-turris-omnia-mcu | 16 ++
+ drivers/platform/cznic/Kconfig | 4 +
+ drivers/platform/cznic/Makefile | 1 +
+ .../platform/cznic/turris-omnia-mcu-base.c | 5 +
+ .../cznic/turris-omnia-mcu-sys-off-wakeup.c | 260 ++++++++++++++++++
+ drivers/platform/cznic/turris-omnia-mcu.h | 20 ++
+ 6 files changed, 306 insertions(+)
+ create mode 100644 drivers/platform/cznic/turris-omnia-mcu-sys-off-wakeup.c
+
+--- a/Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu
++++ b/Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu
+@@ -38,6 +38,22 @@ Description: (RW) The front button on th
+
+ Format: %s.
+
++What: /sys/bus/i2c/devices/<mcu_device>/front_button_poweron
++Date: September 2024
++KernelVersion: 6.11
++Contact: Marek Behún <kabel at kernel.org>
++Description: (RW) Newer versions of the microcontroller firmware of the
++ Turris Omnia router support powering off the router into true
++ low power mode. The router can be powered on by pressing the
++ front button.
++
++ This file configures whether front button power on is enabled.
++
++ This file is present only if the power off feature is supported
++ by the firmware.
++
++ Format: %i.
++
+ What: /sys/bus/i2c/devices/<mcu_device>/fw_features
+ Date: September 2024
+ KernelVersion: 6.11
+--- a/drivers/platform/cznic/Kconfig
++++ b/drivers/platform/cznic/Kconfig
+@@ -18,10 +18,14 @@ config TURRIS_OMNIA_MCU
+ depends on I2C
+ select GPIOLIB
+ select GPIOLIB_IRQCHIP
++ select RTC_CLASS
+ help
+ Say Y here to add support for the features implemented by the
+ microcontroller on the CZ.NIC's Turris Omnia SOHO router.
+ The features include:
++ - board poweroff into true low power mode (with voltage regulators
++ disabled) and the ability to configure wake up from this mode (via
++ rtcwake)
+ - GPIO pins
+ - to get front button press events (the front button can be
+ configured either to generate press events to the CPU or to change
+--- a/drivers/platform/cznic/Makefile
++++ b/drivers/platform/cznic/Makefile
+@@ -3,3 +3,4 @@
+ obj-$(CONFIG_TURRIS_OMNIA_MCU) += turris-omnia-mcu.o
+ turris-omnia-mcu-y := turris-omnia-mcu-base.o
+ turris-omnia-mcu-y += turris-omnia-mcu-gpio.o
++turris-omnia-mcu-y += turris-omnia-mcu-sys-off-wakeup.o
+--- a/drivers/platform/cznic/turris-omnia-mcu-base.c
++++ b/drivers/platform/cznic/turris-omnia-mcu-base.c
+@@ -197,6 +197,7 @@ static const struct attribute_group omni
+ static const struct attribute_group *omnia_mcu_groups[] = {
+ &omnia_mcu_base_group,
+ &omnia_mcu_gpio_group,
++ &omnia_mcu_poweroff_group,
+ NULL
+ };
+
+@@ -371,6 +372,10 @@ static int omnia_mcu_probe(struct i2c_cl
+ "Cannot read board info\n");
+ }
+
++ err = omnia_mcu_register_sys_off_and_wakeup(mcu);
++ if (err)
++ return err;
++
+ return omnia_mcu_register_gpiochip(mcu);
+ }
+
+--- /dev/null
++++ b/drivers/platform/cznic/turris-omnia-mcu-sys-off-wakeup.c
+@@ -0,0 +1,260 @@
++// SPDX-License-Identifier: GPL-2.0
++/*
++ * CZ.NIC's Turris Omnia MCU system off and RTC wakeup driver
++ *
++ * This is not a true RTC driver (in the sense that it does not provide a
++ * real-time clock), rather the MCU implements a wakeup from powered off state
++ * at a specified time relative to MCU boot, and we expose this feature via RTC
++ * alarm, so that it can be used via the rtcwake command, which is the standard
++ * Linux command for this.
++ *
++ * 2024 by Marek Behún <kabel at kernel.org>
++ */
++
++#include <linux/crc32.h>
++#include <linux/delay.h>
++#include <linux/device.h>
++#include <linux/err.h>
++#include <linux/i2c.h>
++#include <linux/kstrtox.h>
++#include <linux/reboot.h>
++#include <linux/rtc.h>
++#include <linux/sysfs.h>
++#include <linux/types.h>
++
++#include <linux/turris-omnia-mcu-interface.h>
++#include "turris-omnia-mcu.h"
++
++static int omnia_get_uptime_wakeup(const struct i2c_client *client, u32 *uptime,
++ u32 *wakeup)
++{
++ __le32 reply[2];
++ int err;
++
++ err = omnia_cmd_read(client, OMNIA_CMD_GET_UPTIME_AND_WAKEUP, reply,
++ sizeof(reply));
++ if (err)
++ return err;
++
++ if (uptime)
++ *uptime = le32_to_cpu(reply[0]);
++
++ if (wakeup)
++ *wakeup = le32_to_cpu(reply[1]);
++
++ return 0;
++}
++
++static int omnia_read_time(struct device *dev, struct rtc_time *tm)
++{
++ u32 uptime;
++ int err;
++
++ err = omnia_get_uptime_wakeup(to_i2c_client(dev), &uptime, NULL);
++ if (err)
++ return err;
++
++ rtc_time64_to_tm(uptime, tm);
++
++ return 0;
++}
++
++static int omnia_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
++{
++ struct i2c_client *client = to_i2c_client(dev);
++ struct omnia_mcu *mcu = i2c_get_clientdata(client);
++ u32 wakeup;
++ int err;
++
++ err = omnia_get_uptime_wakeup(client, NULL, &wakeup);
++ if (err)
++ return err;
++
++ alrm->enabled = !!wakeup;
++ rtc_time64_to_tm(wakeup ?: mcu->rtc_alarm, &alrm->time);
++
++ return 0;
++}
++
++static int omnia_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
++{
++ struct i2c_client *client = to_i2c_client(dev);
++ struct omnia_mcu *mcu = i2c_get_clientdata(client);
++
++ mcu->rtc_alarm = rtc_tm_to_time64(&alrm->time);
++
++ if (alrm->enabled)
++ return omnia_cmd_write_u32(client, OMNIA_CMD_SET_WAKEUP,
++ mcu->rtc_alarm);
++
++ return 0;
++}
++
++static int omnia_alarm_irq_enable(struct device *dev, unsigned int enabled)
++{
++ struct i2c_client *client = to_i2c_client(dev);
++ struct omnia_mcu *mcu = i2c_get_clientdata(client);
++
++ return omnia_cmd_write_u32(client, OMNIA_CMD_SET_WAKEUP,
++ enabled ? mcu->rtc_alarm : 0);
++}
++
++static const struct rtc_class_ops omnia_rtc_ops = {
++ .read_time = omnia_read_time,
++ .read_alarm = omnia_read_alarm,
++ .set_alarm = omnia_set_alarm,
++ .alarm_irq_enable = omnia_alarm_irq_enable,
++};
++
++static int omnia_power_off(struct sys_off_data *data)
++{
++ struct omnia_mcu *mcu = data->cb_data;
++ __be32 tmp;
++ u8 cmd[9];
++ u16 arg;
++ int err;
++
++ if (mcu->front_button_poweron)
++ arg = OMNIA_CMD_POWER_OFF_POWERON_BUTTON;
++ else
++ arg = 0;
++
++ cmd[0] = OMNIA_CMD_POWER_OFF;
++ put_unaligned_le16(OMNIA_CMD_POWER_OFF_MAGIC, &cmd[1]);
++ put_unaligned_le16(arg, &cmd[3]);
++
++ /*
++ * Although all values from and to MCU are passed in little-endian, the
++ * MCU's CRC unit uses big-endian CRC32 polynomial (0x04c11db7), so we
++ * need to use crc32_be() here.
++ */
++ tmp = cpu_to_be32(get_unaligned_le32(&cmd[1]));
++ put_unaligned_le32(crc32_be(~0, (void *)&tmp, sizeof(tmp)), &cmd[5]);
++
++ err = omnia_cmd_write(mcu->client, cmd, sizeof(cmd));
++ if (err)
++ dev_err(&mcu->client->dev,
++ "Unable to send the poweroff command: %d\n", err);
++
++ return NOTIFY_DONE;
++}
++
++static int omnia_restart(struct sys_off_data *data)
++{
++ struct omnia_mcu *mcu = data->cb_data;
++ u8 cmd[3];
++ int err;
++
++ cmd[0] = OMNIA_CMD_GENERAL_CONTROL;
++
++ if (reboot_mode == REBOOT_HARD)
++ cmd[1] = cmd[2] = OMNIA_CTL_HARD_RST;
++ else
++ cmd[1] = cmd[2] = OMNIA_CTL_LIGHT_RST;
++
++ err = omnia_cmd_write(mcu->client, cmd, sizeof(cmd));
++ if (err)
++ dev_err(&mcu->client->dev,
++ "Unable to send the restart command: %d\n", err);
++
++ /*
++ * MCU needs a little bit to process the I2C command, otherwise it will
++ * do a light reset based on SOC SYSRES_OUT pin.
++ */
++ mdelay(1);
++
++ return NOTIFY_DONE;
++}
++
++static ssize_t front_button_poweron_show(struct device *dev,
++ struct device_attribute *a, char *buf)
++{
++ struct omnia_mcu *mcu = dev_get_drvdata(dev);
++
++ return sysfs_emit(buf, "%d\n", mcu->front_button_poweron);
++}
++
++static ssize_t front_button_poweron_store(struct device *dev,
++ struct device_attribute *a,
++ const char *buf, size_t count)
++{
++ struct omnia_mcu *mcu = dev_get_drvdata(dev);
++ bool val;
++ int err;
++
++ err = kstrtobool(buf, &val);
++ if (err)
++ return err;
++
++ mcu->front_button_poweron = val;
++
++ return count;
++}
++static DEVICE_ATTR_RW(front_button_poweron);
++
++static struct attribute *omnia_mcu_poweroff_attrs[] = {
++ &dev_attr_front_button_poweron.attr,
++ NULL
++};
++
++static umode_t poweroff_attrs_visible(struct kobject *kobj, struct attribute *a,
++ int n)
++{
++ struct device *dev = kobj_to_dev(kobj);
++ struct omnia_mcu *mcu = dev_get_drvdata(dev);
++
++ if (mcu->features & OMNIA_FEAT_POWEROFF_WAKEUP)
++ return a->mode;
++
++ return 0;
++}
++
++const struct attribute_group omnia_mcu_poweroff_group = {
++ .attrs = omnia_mcu_poweroff_attrs,
++ .is_visible = poweroff_attrs_visible,
++};
++
++int omnia_mcu_register_sys_off_and_wakeup(struct omnia_mcu *mcu)
++{
++ struct device *dev = &mcu->client->dev;
++ int err;
++
++ /* MCU restart is always available */
++ err = devm_register_sys_off_handler(dev, SYS_OFF_MODE_RESTART,
++ SYS_OFF_PRIO_FIRMWARE,
++ omnia_restart, mcu);
++ if (err)
++ return dev_err_probe(dev, err,
++ "Cannot register system restart handler\n");
++
++ /*
++ * Poweroff and wakeup are available only if POWEROFF_WAKEUP feature is
++ * present.
++ */
++ if (!(mcu->features & OMNIA_FEAT_POWEROFF_WAKEUP))
++ return 0;
++
++ err = devm_register_sys_off_handler(dev, SYS_OFF_MODE_POWER_OFF,
++ SYS_OFF_PRIO_FIRMWARE,
++ omnia_power_off, mcu);
++ if (err)
++ return dev_err_probe(dev, err,
++ "Cannot register system power off handler\n");
++
++ mcu->rtcdev = devm_rtc_allocate_device(dev);
++ if (IS_ERR(mcu->rtcdev))
++ return dev_err_probe(dev, PTR_ERR(mcu->rtcdev),
++ "Cannot allocate RTC device\n");
++
++ mcu->rtcdev->ops = &omnia_rtc_ops;
++ mcu->rtcdev->range_max = U32_MAX;
++ set_bit(RTC_FEATURE_ALARM_WAKEUP_ONLY, mcu->rtcdev->features);
++
++ err = devm_rtc_register_device(mcu->rtcdev);
++ if (err)
++ return dev_err_probe(dev, err, "Cannot register RTC device\n");
++
++ mcu->front_button_poweron = true;
++
++ return 0;
++}
+--- a/drivers/platform/cznic/turris-omnia-mcu.h
++++ b/drivers/platform/cznic/turris-omnia-mcu.h
+@@ -15,8 +15,10 @@
+ #include <linux/types.h>
+ #include <linux/workqueue.h>
+ #include <asm/byteorder.h>
++#include <asm/unaligned.h>
+
+ struct i2c_client;
++struct rtc_device;
+
+ struct omnia_mcu {
+ struct i2c_client *client;
+@@ -36,6 +38,11 @@ struct omnia_mcu {
+ struct delayed_work button_release_emul_work;
+ unsigned long last_status;
+ bool button_pressed_emul;
++
++ /* RTC device for configuring wake-up */
++ struct rtc_device *rtcdev;
++ u32 rtc_alarm;
++ bool front_button_poweron;
+ };
+
+ int omnia_cmd_write_read(const struct i2c_client *client,
+@@ -48,6 +55,17 @@ static inline int omnia_cmd_write(const
+ return omnia_cmd_write_read(client, cmd, len, NULL, 0);
+ }
+
++static inline int omnia_cmd_write_u32(const struct i2c_client *client, u8 cmd,
++ u32 val)
++{
++ u8 buf[5];
++
++ buf[0] = cmd;
++ put_unaligned_le32(val, &buf[1]);
++
++ return omnia_cmd_write(client, buf, sizeof(buf));
++}
++
+ static inline int omnia_cmd_read(const struct i2c_client *client, u8 cmd,
+ void *reply, unsigned int len)
+ {
+@@ -136,7 +154,9 @@ static inline int omnia_cmd_read_u8(cons
+ }
+
+ extern const struct attribute_group omnia_mcu_gpio_group;
++extern const struct attribute_group omnia_mcu_poweroff_group;
+
+ int omnia_mcu_register_gpiochip(struct omnia_mcu *mcu);
++int omnia_mcu_register_sys_off_and_wakeup(struct omnia_mcu *mcu);
+
+ #endif /* __TURRIS_OMNIA_MCU_H */
diff --git a/target/linux/mvebu/patches-6.6/820-v6.11-05-platform-cznic-turris-omnia-mcu-Add-support-for-MCU-.patch b/target/linux/mvebu/patches-6.6/820-v6.11-05-platform-cznic-turris-omnia-mcu-Add-support-for-MCU-.patch
new file mode 100644
index 0000000000..cf3f88bfcf
--- /dev/null
+++ b/target/linux/mvebu/patches-6.6/820-v6.11-05-platform-cznic-turris-omnia-mcu-Add-support-for-MCU-.patch
@@ -0,0 +1,250 @@
+From 33ae4e4c86bc6ff298489fb8b743e2743dd0af6d Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <kabel at kernel.org>
+Date: Mon, 1 Jul 2024 13:30:07 +0200
+Subject: [PATCH 05/11] platform: cznic: turris-omnia-mcu: Add support for MCU
+ watchdog
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Add support for the watchdog mechanism provided by the MCU.
+
+Signed-off-by: Marek Behún <kabel at kernel.org>
+Reviewed-by: Andy Shevchenko <andy at kernel.org>
+Reviewed-by: Guenter Roeck <linux at roeck-us.net>
+Acked-by: Bartosz Golaszewski <bartosz.golaszewski at linaro.org>
+Link: https://lore.kernel.org/r/20240701113010.16447-6-kabel@kernel.org
+Signed-off-by: Arnd Bergmann <arnd at arndb.de>
+---
+ drivers/platform/cznic/Kconfig | 2 +
+ drivers/platform/cznic/Makefile | 1 +
+ .../platform/cznic/turris-omnia-mcu-base.c | 4 +
+ .../cznic/turris-omnia-mcu-watchdog.c | 130 ++++++++++++++++++
+ drivers/platform/cznic/turris-omnia-mcu.h | 24 ++++
+ 5 files changed, 161 insertions(+)
+ create mode 100644 drivers/platform/cznic/turris-omnia-mcu-watchdog.c
+
+--- a/drivers/platform/cznic/Kconfig
++++ b/drivers/platform/cznic/Kconfig
+@@ -19,6 +19,7 @@ config TURRIS_OMNIA_MCU
+ select GPIOLIB
+ select GPIOLIB_IRQCHIP
+ select RTC_CLASS
++ select WATCHDOG_CORE
+ help
+ Say Y here to add support for the features implemented by the
+ microcontroller on the CZ.NIC's Turris Omnia SOHO router.
+@@ -26,6 +27,7 @@ config TURRIS_OMNIA_MCU
+ - board poweroff into true low power mode (with voltage regulators
+ disabled) and the ability to configure wake up from this mode (via
+ rtcwake)
++ - MCU watchdog
+ - GPIO pins
+ - to get front button press events (the front button can be
+ configured either to generate press events to the CPU or to change
+--- a/drivers/platform/cznic/Makefile
++++ b/drivers/platform/cznic/Makefile
+@@ -4,3 +4,4 @@ obj-$(CONFIG_TURRIS_OMNIA_MCU) += turris
+ turris-omnia-mcu-y := turris-omnia-mcu-base.o
+ turris-omnia-mcu-y += turris-omnia-mcu-gpio.o
+ turris-omnia-mcu-y += turris-omnia-mcu-sys-off-wakeup.o
++turris-omnia-mcu-y += turris-omnia-mcu-watchdog.o
+--- a/drivers/platform/cznic/turris-omnia-mcu-base.c
++++ b/drivers/platform/cznic/turris-omnia-mcu-base.c
+@@ -376,6 +376,10 @@ static int omnia_mcu_probe(struct i2c_cl
+ if (err)
+ return err;
+
++ err = omnia_mcu_register_watchdog(mcu);
++ if (err)
++ return err;
++
+ return omnia_mcu_register_gpiochip(mcu);
+ }
+
+--- /dev/null
++++ b/drivers/platform/cznic/turris-omnia-mcu-watchdog.c
+@@ -0,0 +1,130 @@
++// SPDX-License-Identifier: GPL-2.0
++/*
++ * CZ.NIC's Turris Omnia MCU watchdog driver
++ *
++ * 2024 by Marek Behún <kabel at kernel.org>
++ */
++
++#include <linux/bitops.h>
++#include <linux/device.h>
++#include <linux/i2c.h>
++#include <linux/moduleparam.h>
++#include <linux/types.h>
++#include <linux/units.h>
++#include <linux/watchdog.h>
++
++#include <linux/turris-omnia-mcu-interface.h>
++#include "turris-omnia-mcu.h"
++
++#define WATCHDOG_TIMEOUT 120
++
++static unsigned int timeout;
++module_param(timeout, int, 0);
++MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds");
++
++static bool nowayout = WATCHDOG_NOWAYOUT;
++module_param(nowayout, bool, 0);
++MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
++ __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
++
++static int omnia_wdt_start(struct watchdog_device *wdt)
++{
++ struct omnia_mcu *mcu = watchdog_get_drvdata(wdt);
++
++ return omnia_cmd_write_u8(mcu->client, OMNIA_CMD_SET_WATCHDOG_STATE, 1);
++}
++
++static int omnia_wdt_stop(struct watchdog_device *wdt)
++{
++ struct omnia_mcu *mcu = watchdog_get_drvdata(wdt);
++
++ return omnia_cmd_write_u8(mcu->client, OMNIA_CMD_SET_WATCHDOG_STATE, 0);
++}
++
++static int omnia_wdt_ping(struct watchdog_device *wdt)
++{
++ struct omnia_mcu *mcu = watchdog_get_drvdata(wdt);
++
++ return omnia_cmd_write_u8(mcu->client, OMNIA_CMD_SET_WATCHDOG_STATE, 1);
++}
++
++static int omnia_wdt_set_timeout(struct watchdog_device *wdt,
++ unsigned int timeout)
++{
++ struct omnia_mcu *mcu = watchdog_get_drvdata(wdt);
++
++ return omnia_cmd_write_u16(mcu->client, OMNIA_CMD_SET_WDT_TIMEOUT,
++ timeout * DECI);
++}
++
++static unsigned int omnia_wdt_get_timeleft(struct watchdog_device *wdt)
++{
++ struct omnia_mcu *mcu = watchdog_get_drvdata(wdt);
++ u16 timeleft;
++ int err;
++
++ err = omnia_cmd_read_u16(mcu->client, OMNIA_CMD_GET_WDT_TIMELEFT,
++ &timeleft);
++ if (err) {
++ dev_err(&mcu->client->dev, "Cannot get watchdog timeleft: %d\n",
++ err);
++ return 0;
++ }
++
++ return timeleft / DECI;
++}
++
++static const struct watchdog_info omnia_wdt_info = {
++ .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
++ .identity = "Turris Omnia MCU Watchdog",
++};
++
++static const struct watchdog_ops omnia_wdt_ops = {
++ .owner = THIS_MODULE,
++ .start = omnia_wdt_start,
++ .stop = omnia_wdt_stop,
++ .ping = omnia_wdt_ping,
++ .set_timeout = omnia_wdt_set_timeout,
++ .get_timeleft = omnia_wdt_get_timeleft,
++};
++
++int omnia_mcu_register_watchdog(struct omnia_mcu *mcu)
++{
++ struct device *dev = &mcu->client->dev;
++ u8 state;
++ int err;
++
++ if (!(mcu->features & OMNIA_FEAT_WDT_PING))
++ return 0;
++
++ mcu->wdt.info = &omnia_wdt_info;
++ mcu->wdt.ops = &omnia_wdt_ops;
++ mcu->wdt.parent = dev;
++ mcu->wdt.min_timeout = 1;
++ mcu->wdt.max_timeout = 65535 / DECI;
++
++ mcu->wdt.timeout = WATCHDOG_TIMEOUT;
++ watchdog_init_timeout(&mcu->wdt, timeout, dev);
++
++ watchdog_set_drvdata(&mcu->wdt, mcu);
++
++ omnia_wdt_set_timeout(&mcu->wdt, mcu->wdt.timeout);
++
++ err = omnia_cmd_read_u8(mcu->client, OMNIA_CMD_GET_WATCHDOG_STATE,
++ &state);
++ if (err)
++ return dev_err_probe(dev, err,
++ "Cannot get MCU watchdog state\n");
++
++ if (state)
++ set_bit(WDOG_HW_RUNNING, &mcu->wdt.status);
++
++ watchdog_set_nowayout(&mcu->wdt, nowayout);
++ watchdog_stop_on_reboot(&mcu->wdt);
++ err = devm_watchdog_register_device(dev, &mcu->wdt);
++ if (err)
++ return dev_err_probe(dev, err,
++ "Cannot register MCU watchdog\n");
++
++ return 0;
++}
+--- a/drivers/platform/cznic/turris-omnia-mcu.h
++++ b/drivers/platform/cznic/turris-omnia-mcu.h
+@@ -13,6 +13,7 @@
+ #include <linux/if_ether.h>
+ #include <linux/mutex.h>
+ #include <linux/types.h>
++#include <linux/watchdog.h>
+ #include <linux/workqueue.h>
+ #include <asm/byteorder.h>
+ #include <asm/unaligned.h>
+@@ -43,6 +44,9 @@ struct omnia_mcu {
+ struct rtc_device *rtcdev;
+ u32 rtc_alarm;
+ bool front_button_poweron;
++
++ /* MCU watchdog */
++ struct watchdog_device wdt;
+ };
+
+ int omnia_cmd_write_read(const struct i2c_client *client,
+@@ -55,6 +59,25 @@ static inline int omnia_cmd_write(const
+ return omnia_cmd_write_read(client, cmd, len, NULL, 0);
+ }
+
++static inline int omnia_cmd_write_u8(const struct i2c_client *client, u8 cmd,
++ u8 val)
++{
++ u8 buf[2] = { cmd, val };
++
++ return omnia_cmd_write(client, buf, sizeof(buf));
++}
++
++static inline int omnia_cmd_write_u16(const struct i2c_client *client, u8 cmd,
++ u16 val)
++{
++ u8 buf[3];
++
++ buf[0] = cmd;
++ put_unaligned_le16(val, &buf[1]);
++
++ return omnia_cmd_write(client, buf, sizeof(buf));
++}
++
+ static inline int omnia_cmd_write_u32(const struct i2c_client *client, u8 cmd,
+ u32 val)
+ {
+@@ -158,5 +181,6 @@ extern const struct attribute_group omni
+
+ int omnia_mcu_register_gpiochip(struct omnia_mcu *mcu);
+ int omnia_mcu_register_sys_off_and_wakeup(struct omnia_mcu *mcu);
++int omnia_mcu_register_watchdog(struct omnia_mcu *mcu);
+
+ #endif /* __TURRIS_OMNIA_MCU_H */
diff --git a/target/linux/mvebu/patches-6.6/820-v6.11-06-platform-cznic-turris-omnia-mcu-Add-support-for-MCU-.patch b/target/linux/mvebu/patches-6.6/820-v6.11-06-platform-cznic-turris-omnia-mcu-Add-support-for-MCU-.patch
new file mode 100644
index 0000000000..35387e34c7
--- /dev/null
+++ b/target/linux/mvebu/patches-6.6/820-v6.11-06-platform-cznic-turris-omnia-mcu-Add-support-for-MCU-.patch
@@ -0,0 +1,225 @@
+From b3ed8645c45567b598bef0868dca166f8ed166a0 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <kabel at kernel.org>
+Date: Mon, 1 Jul 2024 13:30:08 +0200
+Subject: [PATCH 06/11] platform: cznic: turris-omnia-mcu: Add support for MCU
+ provided TRNG
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Add support for true random number generator provided by the MCU.
+New Omnia boards come without the Atmel SHA204-A chip. Instead the
+crypto functionality is provided by new microcontroller, which has
+a TRNG peripheral.
+
+Signed-off-by: Marek Behún <kabel at kernel.org>
+Acked-by: Bartosz Golaszewski <bartosz.golaszewski at linaro.org>
+Link: https://lore.kernel.org/r/20240701113010.16447-7-kabel@kernel.org
+Signed-off-by: Arnd Bergmann <arnd at arndb.de>
+---
+ drivers/platform/cznic/Kconfig | 2 +
+ drivers/platform/cznic/Makefile | 1 +
+ .../platform/cznic/turris-omnia-mcu-base.c | 6 +-
+ .../platform/cznic/turris-omnia-mcu-gpio.c | 2 +-
+ .../platform/cznic/turris-omnia-mcu-trng.c | 105 ++++++++++++++++++
+ drivers/platform/cznic/turris-omnia-mcu.h | 8 ++
+ 6 files changed, 122 insertions(+), 2 deletions(-)
+ create mode 100644 drivers/platform/cznic/turris-omnia-mcu-trng.c
+
+--- a/drivers/platform/cznic/Kconfig
++++ b/drivers/platform/cznic/Kconfig
+@@ -18,6 +18,7 @@ config TURRIS_OMNIA_MCU
+ depends on I2C
+ select GPIOLIB
+ select GPIOLIB_IRQCHIP
++ select HW_RANDOM
+ select RTC_CLASS
+ select WATCHDOG_CORE
+ help
+@@ -27,6 +28,7 @@ config TURRIS_OMNIA_MCU
+ - board poweroff into true low power mode (with voltage regulators
+ disabled) and the ability to configure wake up from this mode (via
+ rtcwake)
++ - true random number generator (if available on the MCU)
+ - MCU watchdog
+ - GPIO pins
+ - to get front button press events (the front button can be
+--- a/drivers/platform/cznic/Makefile
++++ b/drivers/platform/cznic/Makefile
+@@ -4,4 +4,5 @@ obj-$(CONFIG_TURRIS_OMNIA_MCU) += turris
+ turris-omnia-mcu-y := turris-omnia-mcu-base.o
+ turris-omnia-mcu-y += turris-omnia-mcu-gpio.o
+ turris-omnia-mcu-y += turris-omnia-mcu-sys-off-wakeup.o
++turris-omnia-mcu-y += turris-omnia-mcu-trng.o
+ turris-omnia-mcu-y += turris-omnia-mcu-watchdog.o
+--- a/drivers/platform/cznic/turris-omnia-mcu-base.c
++++ b/drivers/platform/cznic/turris-omnia-mcu-base.c
+@@ -380,7 +380,11 @@ static int omnia_mcu_probe(struct i2c_cl
+ if (err)
+ return err;
+
+- return omnia_mcu_register_gpiochip(mcu);
++ err = omnia_mcu_register_gpiochip(mcu);
++ if (err)
++ return err;
++
++ return omnia_mcu_register_trng(mcu);
+ }
+
+ static const struct of_device_id of_omnia_mcu_match[] = {
+--- a/drivers/platform/cznic/turris-omnia-mcu-gpio.c
++++ b/drivers/platform/cznic/turris-omnia-mcu-gpio.c
+@@ -194,7 +194,7 @@ static const struct omnia_gpio omnia_gpi
+ };
+
+ /* mapping from interrupts to indexes of GPIOs in the omnia_gpios array */
+-static const u8 omnia_int_to_gpio_idx[32] = {
++const u8 omnia_int_to_gpio_idx[32] = {
+ [__bf_shf(OMNIA_INT_CARD_DET)] = 4,
+ [__bf_shf(OMNIA_INT_MSATA_IND)] = 5,
+ [__bf_shf(OMNIA_INT_USB30_OVC)] = 6,
+--- /dev/null
++++ b/drivers/platform/cznic/turris-omnia-mcu-trng.c
+@@ -0,0 +1,105 @@
++// SPDX-License-Identifier: GPL-2.0
++/*
++ * CZ.NIC's Turris Omnia MCU TRNG driver
++ *
++ * 2024 by Marek Behún <kabel at kernel.org>
++ */
++
++#include <linux/bitfield.h>
++#include <linux/completion.h>
++#include <linux/container_of.h>
++#include <linux/errno.h>
++#include <linux/gpio/consumer.h>
++#include <linux/gpio/driver.h>
++#include <linux/hw_random.h>
++#include <linux/i2c.h>
++#include <linux/interrupt.h>
++#include <linux/minmax.h>
++#include <linux/string.h>
++#include <linux/types.h>
++
++#include "../../gpio/gpiolib.h"
++
++#include <linux/turris-omnia-mcu-interface.h>
++#include "turris-omnia-mcu.h"
++
++#define OMNIA_CMD_TRNG_MAX_ENTROPY_LEN 64
++
++static irqreturn_t omnia_trng_irq_handler(int irq, void *dev_id)
++{
++ struct omnia_mcu *mcu = dev_id;
++
++ complete(&mcu->trng_entropy_ready);
++
++ return IRQ_HANDLED;
++}
++
++static int omnia_trng_read(struct hwrng *rng, void *data, size_t max, bool wait)
++{
++ struct omnia_mcu *mcu = container_of(rng, struct omnia_mcu, trng);
++ u8 reply[1 + OMNIA_CMD_TRNG_MAX_ENTROPY_LEN];
++ int err, bytes;
++
++ if (!wait && !completion_done(&mcu->trng_entropy_ready))
++ return 0;
++
++ do {
++ if (wait_for_completion_interruptible(&mcu->trng_entropy_ready))
++ return -ERESTARTSYS;
++
++ err = omnia_cmd_read(mcu->client,
++ OMNIA_CMD_TRNG_COLLECT_ENTROPY,
++ reply, sizeof(reply));
++ if (err)
++ return err;
++
++ bytes = min3(reply[0], max, OMNIA_CMD_TRNG_MAX_ENTROPY_LEN);
++ } while (wait && !bytes);
++
++ memcpy(data, &reply[1], bytes);
++
++ return bytes;
++}
++
++int omnia_mcu_register_trng(struct omnia_mcu *mcu)
++{
++ struct device *dev = &mcu->client->dev;
++ u8 irq_idx, dummy;
++ int irq, err;
++
++ if (!(mcu->features & OMNIA_FEAT_TRNG))
++ return 0;
++
++ irq_idx = omnia_int_to_gpio_idx[__bf_shf(OMNIA_INT_TRNG)];
++ irq = gpiod_to_irq(gpiochip_get_desc(&mcu->gc, irq_idx));
++ if (!irq)
++ return dev_err_probe(dev, -ENXIO, "Cannot get TRNG IRQ\n");
++
++ /*
++ * If someone else cleared the TRNG interrupt but did not read the
++ * entropy, a new interrupt won't be generated, and entropy collection
++ * will be stuck. Ensure an interrupt will be generated by executing
++ * the collect entropy command (and discarding the result).
++ */
++ err = omnia_cmd_read(mcu->client, OMNIA_CMD_TRNG_COLLECT_ENTROPY,
++ &dummy, 1);
++ if (err)
++ return err;
++
++ init_completion(&mcu->trng_entropy_ready);
++
++ err = devm_request_threaded_irq(dev, irq, NULL, omnia_trng_irq_handler,
++ IRQF_ONESHOT, "turris-omnia-mcu-trng",
++ mcu);
++ if (err)
++ return dev_err_probe(dev, err, "Cannot request TRNG IRQ\n");
++
++ mcu->trng.name = "turris-omnia-mcu-trng";
++ mcu->trng.read = omnia_trng_read;
++
++ err = devm_hwrng_register(dev, &mcu->trng);
++ if (err)
++ return dev_err_probe(dev, err, "Cannot register TRNG\n");
++
++ return 0;
++}
+--- a/drivers/platform/cznic/turris-omnia-mcu.h
++++ b/drivers/platform/cznic/turris-omnia-mcu.h
+@@ -9,7 +9,9 @@
+ #define __TURRIS_OMNIA_MCU_H
+
+ #include <linux/bitops.h>
++#include <linux/completion.h>
+ #include <linux/gpio/driver.h>
++#include <linux/hw_random.h>
+ #include <linux/if_ether.h>
+ #include <linux/mutex.h>
+ #include <linux/types.h>
+@@ -47,6 +49,10 @@ struct omnia_mcu {
+
+ /* MCU watchdog */
+ struct watchdog_device wdt;
++
++ /* true random number generator */
++ struct hwrng trng;
++ struct completion trng_entropy_ready;
+ };
+
+ int omnia_cmd_write_read(const struct i2c_client *client,
+@@ -176,11 +182,13 @@ static inline int omnia_cmd_read_u8(cons
+ return omnia_cmd_read(client, cmd, reply, sizeof(*reply));
+ }
+
++extern const u8 omnia_int_to_gpio_idx[32];
+ extern const struct attribute_group omnia_mcu_gpio_group;
+ extern const struct attribute_group omnia_mcu_poweroff_group;
+
+ int omnia_mcu_register_gpiochip(struct omnia_mcu *mcu);
+ int omnia_mcu_register_sys_off_and_wakeup(struct omnia_mcu *mcu);
++int omnia_mcu_register_trng(struct omnia_mcu *mcu);
+ int omnia_mcu_register_watchdog(struct omnia_mcu *mcu);
+
+ #endif /* __TURRIS_OMNIA_MCU_H */
diff --git a/target/linux/mvebu/patches-6.6/820-v6.11-07-ARM-dts-turris-omnia-Add-MCU-system-controller-node.patch b/target/linux/mvebu/patches-6.6/820-v6.11-07-ARM-dts-turris-omnia-Add-MCU-system-controller-node.patch
new file mode 100644
index 0000000000..ad65de2f52
--- /dev/null
+++ b/target/linux/mvebu/patches-6.6/820-v6.11-07-ARM-dts-turris-omnia-Add-MCU-system-controller-node.patch
@@ -0,0 +1,69 @@
+From 4f11095a4ae00b2fe4cebb21e36ee37cc62f5e1a Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <kabel at kernel.org>
+Date: Mon, 1 Jul 2024 13:30:09 +0200
+Subject: [PATCH 07/11] ARM: dts: turris-omnia: Add MCU system-controller node
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Turris Omnia's MCU provides various features that can be configured over
+I2C at address 0x2a. Add device-tree node.
+
+This does not carry a Fixes tag - we do not want this to get backported
+to stable kernels for the following reason: U-Boot since v2022.10
+inserts a phy-reset-gpio property into the WAN ethernet node pointing to
+the MCU node if it finds the MCU node with a cznic,turris-omnia-mcu
+compatible. Thus if this change got backported to a stable kernel, the
+WAN interface driver would defer probe indefinitely (since it would wait
+for the turris-omnia-mcu driver which would not be present).
+
+Signed-off-by: Marek Behún <kabel at kernel.org>
+Reviewed-by: Andrew Lunn <andrew at lunn.ch>
+Reviewed-by: Andy Shevchenko <andy at kernel.org>
+Reviewed-by: Conor Dooley <conor.dooley at microchip.com>
+Acked-by: Bartosz Golaszewski <bartosz.golaszewski at linaro.org>
+Acked-by: Alexandre Belloni <alexandre.belloni at bootlin.com>
+Link: https://lore.kernel.org/r/20240701113010.16447-8-kabel@kernel.org
+Signed-off-by: Arnd Bergmann <arnd at arndb.de>
+---
+ .../dts/marvell/armada-385-turris-omnia.dts | 22 ++++++++++++++++++-
+ 1 file changed, 21 insertions(+), 1 deletion(-)
+
+--- a/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts
++++ b/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts
+@@ -218,7 +218,22 @@
+ #size-cells = <0>;
+ reg = <0>;
+
+- /* STM32F0 command interface at address 0x2a */
++ mcu: system-controller at 2a {
++ compatible = "cznic,turris-omnia-mcu";
++ reg = <0x2a>;
++
++ pinctrl-names = "default";
++ pinctrl-0 = <&mcu_pins>;
++
++ interrupt-parent = <&gpio1>;
++ interrupts = <11 IRQ_TYPE_NONE>;
++
++ gpio-controller;
++ #gpio-cells = <3>;
++
++ interrupt-controller;
++ #interrupt-cells = <2>;
++ };
+
+ led-controller at 2b {
+ compatible = "cznic,turris-omnia-leds";
+@@ -503,6 +518,11 @@
+ };
+
+ &pinctrl {
++ mcu_pins: mcu-pins {
++ marvell,pins = "mpp43";
++ marvell,function = "gpio";
++ };
++
+ pcawan_pins: pcawan-pins {
+ marvell,pins = "mpp46";
+ marvell,function = "gpio";
diff --git a/target/linux/mvebu/patches-6.6/820-v6.11-08-ARM-dts-turris-omnia-Add-GPIO-key-node-for-front-but.patch b/target/linux/mvebu/patches-6.6/820-v6.11-08-ARM-dts-turris-omnia-Add-GPIO-key-node-for-front-but.patch
new file mode 100644
index 0000000000..4b36167d66
--- /dev/null
+++ b/target/linux/mvebu/patches-6.6/820-v6.11-08-ARM-dts-turris-omnia-Add-GPIO-key-node-for-front-but.patch
@@ -0,0 +1,46 @@
+From c3eeabe0b8d22d7c869278cc0cb35b83512fbed5 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <kabel at kernel.org>
+Date: Mon, 1 Jul 2024 13:30:10 +0200
+Subject: [PATCH 08/11] ARM: dts: turris-omnia: Add GPIO key node for front
+ button
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Now that we have the MCU device-tree node, which acts as a GPIO
+controller, add GPIO key node for the front button.
+
+Signed-off-by: Marek Behún <kabel at kernel.org>
+Reviewed-by: Andrew Lunn <andrew at lunn.ch>
+Reviewed-by: Andy Shevchenko <andy at kernel.org>
+Reviewed-by: Conor Dooley <conor.dooley at microchip.com>
+Acked-by: Bartosz Golaszewski <bartosz.golaszewski at linaro.org>
+Acked-by: Alexandre Belloni <alexandre.belloni at bootlin.com>
+Link: https://lore.kernel.org/r/20240701113010.16447-9-kabel@kernel.org
+Signed-off-by: Arnd Bergmann <arnd at arndb.de>
+---
+ .../boot/dts/marvell/armada-385-turris-omnia.dts | 13 +++++++++++++
+ 1 file changed, 13 insertions(+)
+
+--- a/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts
++++ b/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts
+@@ -112,6 +112,19 @@
+ status = "disabled";
+ };
+
++ gpio-keys {
++ compatible = "gpio-keys";
++
++ front-button {
++ label = "Front Button";
++ linux,code = <KEY_VENDOR>;
++ linux,can-disable;
++ gpios = <&mcu 0 12 GPIO_ACTIVE_HIGH>;
++ /* debouncing is done by the microcontroller */
++ debounce-interval = <0>;
++ };
++ };
++
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "SPDIF";
diff --git a/target/linux/mvebu/patches-6.6/820-v6.11-09-platform-cznic-turris-omnia-mcu-Depend-on-OF.patch b/target/linux/mvebu/patches-6.6/820-v6.11-09-platform-cznic-turris-omnia-mcu-Depend-on-OF.patch
new file mode 100644
index 0000000000..80c9e1a3cc
--- /dev/null
+++ b/target/linux/mvebu/patches-6.6/820-v6.11-09-platform-cznic-turris-omnia-mcu-Depend-on-OF.patch
@@ -0,0 +1,32 @@
+From 08838657bbc35494276c7ba4ef53f30a9816f8c9 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <kabel at kernel.org>
+Date: Mon, 8 Jul 2024 13:40:01 +0200
+Subject: [PATCH 09/11] platform: cznic: turris-omnia-mcu: Depend on OF
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Add depend on OF, otherwise the compilation fails with
+ error: no member named 'of_gpio_n_cells' in 'struct gpio_chip'
+ error: no member named 'of_xlate' in 'struct gpio_chip'
+
+Fixes: dfa556e45ae9 ("platform: cznic: turris-omnia-mcu: Add support for MCU connected GPIOs")
+Reported-by: kernel test robot <lkp at intel.com>
+Closes: https://lore.kernel.org/oe-kbuild-all/202407031646.trNSwajF-lkp@intel.com/
+Signed-off-by: Marek Behún <kabel at kernel.org>
+Link: https://lore.kernel.org/r/20240708114002.4285-2-kabel@kernel.org
+Signed-off-by: Arnd Bergmann <arnd at arndb.de>
+---
+ drivers/platform/cznic/Kconfig | 1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/drivers/platform/cznic/Kconfig
++++ b/drivers/platform/cznic/Kconfig
+@@ -16,6 +16,7 @@ config TURRIS_OMNIA_MCU
+ tristate "Turris Omnia MCU driver"
+ depends on MACH_ARMADA_38X || COMPILE_TEST
+ depends on I2C
++ depends on OF
+ select GPIOLIB
+ select GPIOLIB_IRQCHIP
+ select HW_RANDOM
diff --git a/target/linux/mvebu/patches-6.6/820-v6.11-10-platform-cznic-turris-omnia-mcu-Depend-on-WATCHDOG.patch b/target/linux/mvebu/patches-6.6/820-v6.11-10-platform-cznic-turris-omnia-mcu-Depend-on-WATCHDOG.patch
new file mode 100644
index 0000000000..50e028752a
--- /dev/null
+++ b/target/linux/mvebu/patches-6.6/820-v6.11-10-platform-cznic-turris-omnia-mcu-Depend-on-WATCHDOG.patch
@@ -0,0 +1,32 @@
+From 5e425e6eca155c162da58d4e58e896ed4109c7fd Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <kabel at kernel.org>
+Date: Mon, 8 Jul 2024 13:40:02 +0200
+Subject: [PATCH 10/11] platform: cznic: turris-omnia-mcu: Depend on WATCHDOG
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Add depend on WATCHDOG, otherwise modpost fails with
+ ERROR: modpost: "watchdog_init_timeout" [drivers/platform/cznic/turris-omnia-mcu.ko] undefined!
+ ERROR: modpost: "devm_watchdog_register_device" [drivers/platform/cznic/turris-omnia-mcu.ko] undefined!
+
+Fixes: ab89fb5fb92c ("platform: cznic: turris-omnia-mcu: Add support for MCU watchdog")
+Reported-by: kernel test robot <lkp at intel.com>
+Closes: https://lore.kernel.org/oe-kbuild-all/202407040711.g19y3cWq-lkp@intel.com/
+Signed-off-by: Marek Behún <kabel at kernel.org>
+Link: https://lore.kernel.org/r/20240708114002.4285-3-kabel@kernel.org
+Signed-off-by: Arnd Bergmann <arnd at arndb.de>
+---
+ drivers/platform/cznic/Kconfig | 1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/drivers/platform/cznic/Kconfig
++++ b/drivers/platform/cznic/Kconfig
+@@ -17,6 +17,7 @@ config TURRIS_OMNIA_MCU
+ depends on MACH_ARMADA_38X || COMPILE_TEST
+ depends on I2C
+ depends on OF
++ depends on WATCHDOG
+ select GPIOLIB
+ select GPIOLIB_IRQCHIP
+ select HW_RANDOM
diff --git a/target/linux/mvebu/patches-6.6/820-v6.11-11-platform-cznic-turris-omnia-mcu-fix-Kconfig-dependen.patch b/target/linux/mvebu/patches-6.6/820-v6.11-11-platform-cznic-turris-omnia-mcu-fix-Kconfig-dependen.patch
new file mode 100644
index 0000000000..30a476586e
--- /dev/null
+++ b/target/linux/mvebu/patches-6.6/820-v6.11-11-platform-cznic-turris-omnia-mcu-fix-Kconfig-dependen.patch
@@ -0,0 +1,45 @@
+From 24c68c2525de5fcd0f3b16b2ad1028fb13b53393 Mon Sep 17 00:00:00 2001
+From: Arnd Bergmann <arnd at arndb.de>
+Date: Mon, 15 Jul 2024 08:02:30 +0200
+Subject: [PATCH 11/11] platform: cznic: turris-omnia-mcu: fix Kconfig
+ dependencies
+
+The newly added driver causes a Kconfig warning:
+
+WARNING: unmet direct dependencies detected for RTC_CLASS
+ Depends on [n]: !S390 [=y]
+ Selected by [m]:
+ - TURRIS_OMNIA_MCU [=m] && CZNIC_PLATFORMS [=y] && (MACH_ARMADA_38X || COMPILE_TEST [=y]) && I2C [=m] && OF [=y] && WATCHDOG [=y]
+
+The problem here is that it selects entire subsystems, which normal
+device drivers should not do. Changes all of these to 'depends on'
+instead.
+
+Fixes: dfa556e45ae9e ("platform: cznic: turris-omnia-mcu: Add support for MCU connected GPIOs")
+Fixes: 90e700fd12b61 ("platform: cznic: turris-omnia-mcu: Add support for poweroff and wakeup")
+Fixes: ab89fb5fb92c7 ("platform: cznic: turris-omnia-mcu: Add support for MCU watchdog")
+Fixes: 41bb142a40289 ("platform: cznic: turris-omnia-mcu: Add support for MCU provided TRNG")
+Reported-by: Nathan Chancellor <nathan at kernel.org>
+Signed-off-by: Arnd Bergmann <arnd at arndb.de>
+---
+ drivers/platform/cznic/Kconfig | 8 ++++----
+ 1 file changed, 4 insertions(+), 4 deletions(-)
+
+--- a/drivers/platform/cznic/Kconfig
++++ b/drivers/platform/cznic/Kconfig
+@@ -18,11 +18,11 @@ config TURRIS_OMNIA_MCU
+ depends on I2C
+ depends on OF
+ depends on WATCHDOG
+- select GPIOLIB
++ depends on GPIOLIB
++ depends on HW_RANDOM
++ depends on RTC_CLASS
++ depends on WATCHDOG_CORE
+ select GPIOLIB_IRQCHIP
+- select HW_RANDOM
+- select RTC_CLASS
+- select WATCHDOG_CORE
+ help
+ Say Y here to add support for the features implemented by the
+ microcontroller on the CZ.NIC's Turris Omnia SOHO router.
diff --git a/target/linux/mvebu/patches-6.6/907-MAINTAINERS-Add-an-entry-for-the-IEI-WT61P803-PUZZLE.patch b/target/linux/mvebu/patches-6.6/907-MAINTAINERS-Add-an-entry-for-the-IEI-WT61P803-PUZZLE.patch
index 2a8397d0b5..dad8c16be1 100644
--- a/target/linux/mvebu/patches-6.6/907-MAINTAINERS-Add-an-entry-for-the-IEI-WT61P803-PUZZLE.patch
+++ b/target/linux/mvebu/patches-6.6/907-MAINTAINERS-Add-an-entry-for-the-IEI-WT61P803-PUZZLE.patch
@@ -16,7 +16,7 @@ Cc: Robert Marko <robert.marko at sartura.hr>
--- a/MAINTAINERS
+++ b/MAINTAINERS
-@@ -10138,6 +10138,22 @@ IFCVF VIRTIO DATA PATH ACCELERATOR
+@@ -10142,6 +10142,22 @@ IFCVF VIRTIO DATA PATH ACCELERATOR
R: Zhu Lingshan <lingshan.zhu at intel.com>
F: drivers/vdpa/ifcvf/
More information about the lede-commits
mailing list