[openwrt/openwrt] kernel: bump 6.6 to 6.6.28
LEDE Commits
lede-commits at lists.infradead.org
Tue Apr 23 13:38:10 PDT 2024
robimarko pushed a commit to openwrt/openwrt.git, branch main:
https://git.openwrt.org/5efd41c10b876bf25af3013e57f4bb5341dfe8b8
commit 5efd41c10b876bf25af3013e57f4bb5341dfe8b8
Author: John Audia <therealgraysky at proton.me>
AuthorDate: Wed Apr 17 15:01:37 2024 -0400
kernel: bump 6.6 to 6.6.28
Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.6.28
Removed upstream:
pending-6.6/796-net-dsa-mt7530-trap-link-local-frames-regardless-of-.patch
All oither patches automatically rebased.
1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.6.28&id=8b6c4b62582606c62074a7e7c64156f56d2785f2
Build system: x86/64
Build-tested: x86/64/AMD Cezanne, flogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3
Run-tested: x86/64/AMD Cezanne, flogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3
Signed-off-by: John Audia <therealgraysky at proton.me>
---
include/kernel-6.6 | 4 +-
...-mt753x-remove-mt753x_phylink_pcs_link_up.patch | 4 +-
...530-support-OF-based-registration-of-swit.patch | 4 +-
...530-always-trap-frames-to-active-CPU-port.patch | 10 +-
...530-use-p5_interface_select-as-data-type-.patch | 4 +-
...530-store-port-5-SGMII-capability-of-MT75.patch | 22 +-
...530-improve-comments-regarding-switch-por.patch | 12 +-
...530-improve-code-path-for-setting-up-port.patch | 6 +-
...530-do-not-run-mt7530_setup_port5-if-port.patch | 4 +-
...sa-mt7530-move-XTAL-check-to-mt7530_setup.patch | 2 +-
...530-call-port-6-setup-from-mt7530_mac_con.patch | 2 +-
...-mt7530-remove-pad_setup-function-pointer.patch | 20 +-
...t7530-correct-port-capabilities-of-MT7988.patch | 2 +-
...530-do-not-clear-config-supported_interfa.patch | 2 +-
...530-remove-.mac_port_config-for-MT7988-an.patch | 8 +-
...530-set-interrupt-register-only-for-MT753.patch | 2 +-
...530-do-not-use-SW_PHY_RST-to-reset-MT7531.patch | 2 +-
...530-get-rid-of-useless-error-returns-on-p.patch | 18 +-
...7530-get-rid-of-priv-info-cpu_port_config.patch | 34 +-
...t-dsa-mt7530-get-rid-of-mt753x_mac_config.patch | 4 +-
...530-put-initialising-PCS-devices-code-bac.patch | 4 +-
...530-sort-link-settings-ops-and-force-link.patch | 8 +-
...9-net-dsa-mt7530-simplify-link-operations.patch | 4 +-
...-net-dsa-mt7530-disable-LEDs-before-reset.patch | 2 +-
...530-fix-improper-frames-on-all-25MHz-and-.patch | 4 +-
...530-prevent-possible-incorrect-XTAL-frequ.patch | 2 +-
...610-netfilter_match_bypass_default_checks.patch | 2 +-
...530-fix-enabling-EEE-on-MT7531-switch-on-.patch | 4 +-
...530-trap-link-local-frames-regardless-of-.patch | 483 ---------------------
29 files changed, 98 insertions(+), 581 deletions(-)
diff --git a/include/kernel-6.6 b/include/kernel-6.6
index 768285e092..7b0c2dd5de 100644
--- a/include/kernel-6.6
+++ b/include/kernel-6.6
@@ -1,2 +1,2 @@
-LINUX_VERSION-6.6 = .27
-LINUX_KERNEL_HASH-6.6.27 = 639e50060e3c8f23ed017cb10cfeacc6ba88ff5583812bb76859b4cc6a128291
+LINUX_VERSION-6.6 = .28
+LINUX_KERNEL_HASH-6.6.28 = 818716ed13e7dba6aaeae24e3073993e260812ed128d10272e94b922ee6d3394
diff --git a/target/linux/generic/backport-6.6/790-02-v6.7-net-dsa-mt753x-remove-mt753x_phylink_pcs_link_up.patch b/target/linux/generic/backport-6.6/790-02-v6.7-net-dsa-mt753x-remove-mt753x_phylink_pcs_link_up.patch
index 9f0937b810..ff6c592e12 100644
--- a/target/linux/generic/backport-6.6/790-02-v6.7-net-dsa-mt753x-remove-mt753x_phylink_pcs_link_up.patch
+++ b/target/linux/generic/backport-6.6/790-02-v6.7-net-dsa-mt753x-remove-mt753x_phylink_pcs_link_up.patch
@@ -24,7 +24,7 @@ Signed-off-by: Jakub Kicinski <kuba at kernel.org>
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
-@@ -2860,15 +2860,6 @@ static void mt753x_phylink_mac_link_down
+@@ -3021,15 +3021,6 @@ static void mt753x_phylink_mac_link_down
mt7530_clear(priv, MT7530_PMCR_P(port), PMCR_LINK_SETTINGS_MASK);
}
@@ -40,7 +40,7 @@ Signed-off-by: Jakub Kicinski <kuba at kernel.org>
static void mt753x_phylink_mac_link_up(struct dsa_switch *ds, int port,
unsigned int mode,
phy_interface_t interface,
-@@ -2956,8 +2947,6 @@ mt7531_cpu_port_config(struct dsa_switch
+@@ -3117,8 +3108,6 @@ mt7531_cpu_port_config(struct dsa_switch
return ret;
mt7530_write(priv, MT7530_PMCR_P(port),
PMCR_CPU_PORT_SETTING(priv->id));
diff --git a/target/linux/generic/backport-6.6/790-04-v6.9-net-dsa-mt7530-support-OF-based-registration-of-swit.patch b/target/linux/generic/backport-6.6/790-04-v6.9-net-dsa-mt7530-support-OF-based-registration-of-swit.patch
index 83738408eb..46651e32df 100644
--- a/target/linux/generic/backport-6.6/790-04-v6.9-net-dsa-mt7530-support-OF-based-registration-of-swit.patch
+++ b/target/linux/generic/backport-6.6/790-04-v6.9-net-dsa-mt7530-support-OF-based-registration-of-swit.patch
@@ -46,7 +46,7 @@ Signed-off-by: Paolo Abeni <pabeni at redhat.com>
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
-@@ -2182,24 +2182,40 @@ mt7530_free_irq_common(struct mt7530_pri
+@@ -2343,24 +2343,40 @@ mt7530_free_irq_common(struct mt7530_pri
static void
mt7530_free_irq(struct mt7530_priv *priv)
{
@@ -92,7 +92,7 @@ Signed-off-by: Paolo Abeni <pabeni at redhat.com>
bus->priv = priv;
bus->name = KBUILD_MODNAME "-mii";
snprintf(bus->id, MII_BUS_ID_SIZE, KBUILD_MODNAME "-%d", idx++);
-@@ -2210,16 +2226,18 @@ mt7530_setup_mdio(struct mt7530_priv *pr
+@@ -2371,16 +2387,18 @@ mt7530_setup_mdio(struct mt7530_priv *pr
bus->parent = dev;
bus->phy_mask = ~ds->phys_mii_mask;
diff --git a/target/linux/generic/backport-6.6/790-05-v6.9-net-dsa-mt7530-always-trap-frames-to-active-CPU-port.patch b/target/linux/generic/backport-6.6/790-05-v6.9-net-dsa-mt7530-always-trap-frames-to-active-CPU-port.patch
index 56953fb364..108bbaba86 100644
--- a/target/linux/generic/backport-6.6/790-05-v6.9-net-dsa-mt7530-always-trap-frames-to-active-CPU-port.patch
+++ b/target/linux/generic/backport-6.6/790-05-v6.9-net-dsa-mt7530-always-trap-frames-to-active-CPU-port.patch
@@ -38,7 +38,7 @@ Signed-off-by: Jakub Kicinski <kuba at kernel.org>
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
-@@ -1071,10 +1071,6 @@ mt753x_cpu_port_enable(struct dsa_switch
+@@ -1232,10 +1232,6 @@ mt753x_cpu_port_enable(struct dsa_switch
mt7530_set(priv, MT7530_MFC, BC_FFP(BIT(port)) | UNM_FFP(BIT(port)) |
UNU_FFP(BIT(port)));
@@ -49,7 +49,7 @@ Signed-off-by: Jakub Kicinski <kuba at kernel.org>
/* Add the CPU port to the CPU port bitmap for MT7531 and the switch on
* the MT7988 SoC. Trapped frames will be forwarded to the CPU port that
* is affine to the inbound user port.
-@@ -3128,6 +3124,36 @@ static int mt753x_set_mac_eee(struct dsa
+@@ -3289,6 +3285,36 @@ static int mt753x_set_mac_eee(struct dsa
return 0;
}
@@ -86,7 +86,7 @@ Signed-off-by: Jakub Kicinski <kuba at kernel.org>
static int mt7988_pad_setup(struct dsa_switch *ds, phy_interface_t interface)
{
return 0;
-@@ -3183,6 +3209,7 @@ const struct dsa_switch_ops mt7530_switc
+@@ -3344,6 +3370,7 @@ const struct dsa_switch_ops mt7530_switc
.phylink_mac_link_up = mt753x_phylink_mac_link_up,
.get_mac_eee = mt753x_get_mac_eee,
.set_mac_eee = mt753x_set_mac_eee,
@@ -107,7 +107,7 @@ Signed-off-by: Jakub Kicinski <kuba at kernel.org>
#define MIRROR_EN BIT(3)
#define MIRROR_PORT(x) ((x) & 0x7)
#define MIRROR_MASK 0x7
-@@ -780,6 +780,7 @@ struct mt753x_info {
+@@ -785,6 +785,7 @@ struct mt753x_info {
* @irq_domain: IRQ domain of the switch irq_chip
* @irq_enable: IRQ enable bits, synced to SYS_INT_EN
* @create_sgmii: Pointer to function creating SGMII PCS instance(s)
@@ -115,7 +115,7 @@ Signed-off-by: Jakub Kicinski <kuba at kernel.org>
*/
struct mt7530_priv {
struct device *dev;
-@@ -806,6 +807,7 @@ struct mt7530_priv {
+@@ -811,6 +812,7 @@ struct mt7530_priv {
struct irq_domain *irq_domain;
u32 irq_enable;
int (*create_sgmii)(struct mt7530_priv *priv, bool dual_sgmii);
diff --git a/target/linux/generic/backport-6.6/790-06-v6.9-net-dsa-mt7530-use-p5_interface_select-as-data-type-.patch b/target/linux/generic/backport-6.6/790-06-v6.9-net-dsa-mt7530-use-p5_interface_select-as-data-type-.patch
index 5e6f8c22ff..ea79de61f9 100644
--- a/target/linux/generic/backport-6.6/790-06-v6.9-net-dsa-mt7530-use-p5_interface_select-as-data-type-.patch
+++ b/target/linux/generic/backport-6.6/790-06-v6.9-net-dsa-mt7530-use-p5_interface_select-as-data-type-.patch
@@ -25,7 +25,7 @@ Signed-off-by: Jakub Kicinski <kuba at kernel.org>
--- a/drivers/net/dsa/mt7530.h
+++ b/drivers/net/dsa/mt7530.h
-@@ -703,7 +703,7 @@ struct mt7530_port {
+@@ -708,7 +708,7 @@ struct mt7530_port {
/* Port 5 interface select definitions */
enum p5_interface_select {
@@ -34,7 +34,7 @@ Signed-off-by: Jakub Kicinski <kuba at kernel.org>
P5_INTF_SEL_PHY_P0,
P5_INTF_SEL_PHY_P4,
P5_INTF_SEL_GMAC5,
-@@ -796,7 +796,7 @@ struct mt7530_priv {
+@@ -801,7 +801,7 @@ struct mt7530_priv {
bool mcm;
phy_interface_t p6_interface;
phy_interface_t p5_interface;
diff --git a/target/linux/generic/backport-6.6/790-07-v6.9-net-dsa-mt7530-store-port-5-SGMII-capability-of-MT75.patch b/target/linux/generic/backport-6.6/790-07-v6.9-net-dsa-mt7530-store-port-5-SGMII-capability-of-MT75.patch
index 5bbdc6d0e0..2d1a487c98 100644
--- a/target/linux/generic/backport-6.6/790-07-v6.9-net-dsa-mt7530-store-port-5-SGMII-capability-of-MT75.patch
+++ b/target/linux/generic/backport-6.6/790-07-v6.9-net-dsa-mt7530-store-port-5-SGMII-capability-of-MT75.patch
@@ -100,7 +100,7 @@ Signed-off-by: Jakub Kicinski <kuba at kernel.org>
default:
return "unknown";
}
-@@ -2524,6 +2510,12 @@ mt7531_setup(struct dsa_switch *ds)
+@@ -2685,6 +2671,12 @@ mt7531_setup(struct dsa_switch *ds)
return -ENODEV;
}
@@ -113,7 +113,7 @@ Signed-off-by: Jakub Kicinski <kuba at kernel.org>
/* all MACs must be forced link-down before sw reset */
for (i = 0; i < MT7530_NUM_PORTS; i++)
mt7530_write(priv, MT7530_PMCR_P(i), MT7531_FORCE_LNK);
-@@ -2533,21 +2525,18 @@ mt7531_setup(struct dsa_switch *ds)
+@@ -2694,21 +2686,18 @@ mt7531_setup(struct dsa_switch *ds)
SYS_CTRL_PHY_RST | SYS_CTRL_SW_RST |
SYS_CTRL_REG_RST);
@@ -141,7 +141,7 @@ Signed-off-by: Jakub Kicinski <kuba at kernel.org>
mt7530_rmw(priv, MT7531_GPIO_MODE0, MT7531_GPIO0_MASK,
MT7531_GPIO0_INTERRUPT);
-@@ -2607,11 +2596,6 @@ static void mt7530_mac_port_get_caps(str
+@@ -2768,11 +2757,6 @@ static void mt7530_mac_port_get_caps(str
}
}
@@ -153,7 +153,7 @@ Signed-off-by: Jakub Kicinski <kuba at kernel.org>
static void mt7531_mac_port_get_caps(struct dsa_switch *ds, int port,
struct phylink_config *config)
{
-@@ -2624,7 +2608,7 @@ static void mt7531_mac_port_get_caps(str
+@@ -2785,7 +2769,7 @@ static void mt7531_mac_port_get_caps(str
break;
case 5: /* 2nd cpu port supports either rgmii or sgmii/8023z */
@@ -162,7 +162,7 @@ Signed-off-by: Jakub Kicinski <kuba at kernel.org>
phy_interface_set_rgmii(config->supported_interfaces);
break;
}
-@@ -2691,7 +2675,7 @@ static int mt7531_rgmii_setup(struct mt7
+@@ -2852,7 +2836,7 @@ static int mt7531_rgmii_setup(struct mt7
{
u32 val;
@@ -171,7 +171,7 @@ Signed-off-by: Jakub Kicinski <kuba at kernel.org>
dev_err(priv->dev, "RGMII mode is not available for port %d\n",
port);
return -EINVAL;
-@@ -2934,7 +2918,7 @@ mt7531_cpu_port_config(struct dsa_switch
+@@ -3095,7 +3079,7 @@ mt7531_cpu_port_config(struct dsa_switch
switch (port) {
case 5:
@@ -180,7 +180,7 @@ Signed-off-by: Jakub Kicinski <kuba at kernel.org>
interface = PHY_INTERFACE_MODE_RGMII;
else
interface = PHY_INTERFACE_MODE_2500BASEX;
-@@ -3086,7 +3070,7 @@ mt753x_setup(struct dsa_switch *ds)
+@@ -3247,7 +3231,7 @@ mt753x_setup(struct dsa_switch *ds)
mt7530_free_irq_common(priv);
if (priv->create_sgmii) {
@@ -191,7 +191,7 @@ Signed-off-by: Jakub Kicinski <kuba at kernel.org>
}
--- a/drivers/net/dsa/mt7530.h
+++ b/drivers/net/dsa/mt7530.h
-@@ -707,7 +707,6 @@ enum p5_interface_select {
+@@ -712,7 +712,6 @@ enum p5_interface_select {
P5_INTF_SEL_PHY_P0,
P5_INTF_SEL_PHY_P4,
P5_INTF_SEL_GMAC5,
@@ -199,7 +199,7 @@ Signed-off-by: Jakub Kicinski <kuba at kernel.org>
};
struct mt7530_priv;
-@@ -776,6 +775,8 @@ struct mt753x_info {
+@@ -781,6 +780,8 @@ struct mt753x_info {
* registers
* @p6_interface Holding the current port 6 interface
* @p5_intf_sel: Holding the current port 5 interface select
@@ -208,7 +208,7 @@ Signed-off-by: Jakub Kicinski <kuba at kernel.org>
* @irq: IRQ number of the switch
* @irq_domain: IRQ domain of the switch irq_chip
* @irq_enable: IRQ enable bits, synced to SYS_INT_EN
-@@ -797,6 +798,7 @@ struct mt7530_priv {
+@@ -802,6 +803,7 @@ struct mt7530_priv {
phy_interface_t p6_interface;
phy_interface_t p5_interface;
enum p5_interface_select p5_intf_sel;
@@ -216,7 +216,7 @@ Signed-off-by: Jakub Kicinski <kuba at kernel.org>
u8 mirror_rx;
u8 mirror_tx;
struct mt7530_port ports[MT7530_NUM_PORTS];
-@@ -806,7 +808,7 @@ struct mt7530_priv {
+@@ -811,7 +813,7 @@ struct mt7530_priv {
int irq;
struct irq_domain *irq_domain;
u32 irq_enable;
diff --git a/target/linux/generic/backport-6.6/790-08-v6.9-net-dsa-mt7530-improve-comments-regarding-switch-por.patch b/target/linux/generic/backport-6.6/790-08-v6.9-net-dsa-mt7530-improve-comments-regarding-switch-por.patch
index c23074a030..5ad4e5bb70 100644
--- a/target/linux/generic/backport-6.6/790-08-v6.9-net-dsa-mt7530-improve-comments-regarding-switch-por.patch
+++ b/target/linux/generic/backport-6.6/790-08-v6.9-net-dsa-mt7530-improve-comments-regarding-switch-por.patch
@@ -37,7 +37,7 @@ Signed-off-by: Jakub Kicinski <kuba at kernel.org>
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
-@@ -2574,12 +2574,14 @@ static void mt7530_mac_port_get_caps(str
+@@ -2735,12 +2735,14 @@ static void mt7530_mac_port_get_caps(str
struct phylink_config *config)
{
switch (port) {
@@ -54,7 +54,7 @@ Signed-off-by: Jakub Kicinski <kuba at kernel.org>
phy_interface_set_rgmii(config->supported_interfaces);
__set_bit(PHY_INTERFACE_MODE_MII,
config->supported_interfaces);
-@@ -2587,7 +2589,8 @@ static void mt7530_mac_port_get_caps(str
+@@ -2748,7 +2750,8 @@ static void mt7530_mac_port_get_caps(str
config->supported_interfaces);
break;
@@ -64,7 +64,7 @@ Signed-off-by: Jakub Kicinski <kuba at kernel.org>
__set_bit(PHY_INTERFACE_MODE_RGMII,
config->supported_interfaces);
__set_bit(PHY_INTERFACE_MODE_TRGMII,
-@@ -2602,19 +2605,24 @@ static void mt7531_mac_port_get_caps(str
+@@ -2763,19 +2766,24 @@ static void mt7531_mac_port_get_caps(str
struct mt7530_priv *priv = ds->priv;
switch (port) {
@@ -92,7 +92,7 @@ Signed-off-by: Jakub Kicinski <kuba at kernel.org>
__set_bit(PHY_INTERFACE_MODE_SGMII,
config->supported_interfaces);
__set_bit(PHY_INTERFACE_MODE_1000BASEX,
-@@ -2633,11 +2641,13 @@ static void mt7988_mac_port_get_caps(str
+@@ -2794,11 +2802,13 @@ static void mt7988_mac_port_get_caps(str
phy_interface_zero(config->supported_interfaces);
switch (port) {
@@ -107,7 +107,7 @@ Signed-off-by: Jakub Kicinski <kuba at kernel.org>
case 6:
__set_bit(PHY_INTERFACE_MODE_INTERNAL,
config->supported_interfaces);
-@@ -2801,12 +2811,12 @@ mt753x_phylink_mac_config(struct dsa_swi
+@@ -2962,12 +2972,12 @@ mt753x_phylink_mac_config(struct dsa_swi
u32 mcr_cur, mcr_new;
switch (port) {
@@ -122,7 +122,7 @@ Signed-off-by: Jakub Kicinski <kuba at kernel.org>
if (priv->p5_interface == state->interface)
break;
-@@ -2816,7 +2826,7 @@ mt753x_phylink_mac_config(struct dsa_swi
+@@ -2977,7 +2987,7 @@ mt753x_phylink_mac_config(struct dsa_swi
if (priv->p5_intf_sel != P5_DISABLED)
priv->p5_interface = state->interface;
break;
diff --git a/target/linux/generic/backport-6.6/790-09-v6.9-net-dsa-mt7530-improve-code-path-for-setting-up-port.patch b/target/linux/generic/backport-6.6/790-09-v6.9-net-dsa-mt7530-improve-code-path-for-setting-up-port.patch
index a0f565906b..ec51e3f679 100644
--- a/target/linux/generic/backport-6.6/790-09-v6.9-net-dsa-mt7530-improve-code-path-for-setting-up-port.patch
+++ b/target/linux/generic/backport-6.6/790-09-v6.9-net-dsa-mt7530-improve-code-path-for-setting-up-port.patch
@@ -52,7 +52,7 @@ Signed-off-by: Jakub Kicinski <kuba at kernel.org>
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
-@@ -2362,16 +2362,15 @@ mt7530_setup(struct dsa_switch *ds)
+@@ -2523,16 +2523,15 @@ mt7530_setup(struct dsa_switch *ds)
return ret;
/* Setup port 5 */
@@ -75,7 +75,7 @@ Signed-off-by: Jakub Kicinski <kuba at kernel.org>
for_each_child_of_node(dn, mac_np) {
if (!of_device_is_compatible(mac_np,
"mediatek,eth-mac"))
-@@ -2402,6 +2401,8 @@ mt7530_setup(struct dsa_switch *ds)
+@@ -2563,6 +2562,8 @@ mt7530_setup(struct dsa_switch *ds)
of_node_put(phy_node);
break;
}
@@ -84,7 +84,7 @@ Signed-off-by: Jakub Kicinski <kuba at kernel.org>
}
#ifdef CONFIG_GPIOLIB
-@@ -2412,8 +2413,6 @@ mt7530_setup(struct dsa_switch *ds)
+@@ -2573,8 +2574,6 @@ mt7530_setup(struct dsa_switch *ds)
}
#endif /* CONFIG_GPIOLIB */
diff --git a/target/linux/generic/backport-6.6/790-11-v6.9-net-dsa-mt7530-do-not-run-mt7530_setup_port5-if-port.patch b/target/linux/generic/backport-6.6/790-11-v6.9-net-dsa-mt7530-do-not-run-mt7530_setup_port5-if-port.patch
index 9eecede95e..888261373b 100644
--- a/target/linux/generic/backport-6.6/790-11-v6.9-net-dsa-mt7530-do-not-run-mt7530_setup_port5-if-port.patch
+++ b/target/linux/generic/backport-6.6/790-11-v6.9-net-dsa-mt7530-do-not-run-mt7530_setup_port5-if-port.patch
@@ -40,7 +40,7 @@ Signed-off-by: Jakub Kicinski <kuba at kernel.org>
default:
dev_err(ds->dev, "Unsupported p5_intf_sel %d\n",
priv->p5_intf_sel);
-@@ -2367,8 +2364,6 @@ mt7530_setup(struct dsa_switch *ds)
+@@ -2528,8 +2525,6 @@ mt7530_setup(struct dsa_switch *ds)
* Set priv->p5_intf_sel to the appropriate value if PHY muxing
* is detected.
*/
@@ -49,7 +49,7 @@ Signed-off-by: Jakub Kicinski <kuba at kernel.org>
for_each_child_of_node(dn, mac_np) {
if (!of_device_is_compatible(mac_np,
"mediatek,eth-mac"))
-@@ -2400,7 +2395,9 @@ mt7530_setup(struct dsa_switch *ds)
+@@ -2561,7 +2556,9 @@ mt7530_setup(struct dsa_switch *ds)
break;
}
diff --git a/target/linux/generic/backport-6.6/790-13-v6.9-net-dsa-mt7530-move-XTAL-check-to-mt7530_setup.patch b/target/linux/generic/backport-6.6/790-13-v6.9-net-dsa-mt7530-move-XTAL-check-to-mt7530_setup.patch
index 575352dbb1..1a3e28d836 100644
--- a/target/linux/generic/backport-6.6/790-13-v6.9-net-dsa-mt7530-move-XTAL-check-to-mt7530_setup.patch
+++ b/target/linux/generic/backport-6.6/790-13-v6.9-net-dsa-mt7530-move-XTAL-check-to-mt7530_setup.patch
@@ -38,7 +38,7 @@ Signed-off-by: Jakub Kicinski <kuba at kernel.org>
switch (interface) {
case PHY_INTERFACE_MODE_RGMII:
trgint = 0;
-@@ -2295,6 +2288,12 @@ mt7530_setup(struct dsa_switch *ds)
+@@ -2456,6 +2449,12 @@ mt7530_setup(struct dsa_switch *ds)
return -ENODEV;
}
diff --git a/target/linux/generic/backport-6.6/790-15-v6.9-net-dsa-mt7530-call-port-6-setup-from-mt7530_mac_con.patch b/target/linux/generic/backport-6.6/790-15-v6.9-net-dsa-mt7530-call-port-6-setup-from-mt7530_mac_con.patch
index dd886adaa2..5d79a7f3c4 100644
--- a/target/linux/generic/backport-6.6/790-15-v6.9-net-dsa-mt7530-call-port-6-setup-from-mt7530_mac_con.patch
+++ b/target/linux/generic/backport-6.6/790-15-v6.9-net-dsa-mt7530-call-port-6-setup-from-mt7530_mac_con.patch
@@ -79,7 +79,7 @@ Signed-off-by: Jakub Kicinski <kuba at kernel.org>
return 0;
}
-@@ -2649,11 +2653,10 @@ mt7530_mac_config(struct dsa_switch *ds,
+@@ -2810,11 +2814,10 @@ mt7530_mac_config(struct dsa_switch *ds,
{
struct mt7530_priv *priv = ds->priv;
diff --git a/target/linux/generic/backport-6.6/790-16-v6.9-net-dsa-mt7530-remove-pad_setup-function-pointer.patch b/target/linux/generic/backport-6.6/790-16-v6.9-net-dsa-mt7530-remove-pad_setup-function-pointer.patch
index efe554b292..0c7d6132a2 100644
--- a/target/linux/generic/backport-6.6/790-16-v6.9-net-dsa-mt7530-remove-pad_setup-function-pointer.patch
+++ b/target/linux/generic/backport-6.6/790-16-v6.9-net-dsa-mt7530-remove-pad_setup-function-pointer.patch
@@ -47,7 +47,7 @@ Signed-off-by: Jakub Kicinski <kuba at kernel.org>
static void
mt7531_pll_setup(struct mt7530_priv *priv)
{
-@@ -2640,14 +2628,6 @@ static void mt7988_mac_port_get_caps(str
+@@ -2801,14 +2789,6 @@ static void mt7988_mac_port_get_caps(str
}
static int
@@ -62,7 +62,7 @@ Signed-off-by: Jakub Kicinski <kuba at kernel.org>
mt7530_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
phy_interface_t interface)
{
-@@ -2812,8 +2792,6 @@ mt753x_phylink_mac_config(struct dsa_swi
+@@ -2973,8 +2953,6 @@ mt753x_phylink_mac_config(struct dsa_swi
if (priv->p6_interface == state->interface)
break;
@@ -71,7 +71,7 @@ Signed-off-by: Jakub Kicinski <kuba at kernel.org>
if (mt753x_mac_config(ds, port, mode, state) < 0)
goto unsupported;
-@@ -3130,11 +3108,6 @@ mt753x_conduit_state_change(struct dsa_s
+@@ -3291,11 +3269,6 @@ mt753x_conduit_state_change(struct dsa_s
mt7530_rmw(priv, MT7530_MFC, CPU_EN | CPU_PORT_MASK, val);
}
@@ -83,7 +83,7 @@ Signed-off-by: Jakub Kicinski <kuba at kernel.org>
static int mt7988_setup(struct dsa_switch *ds)
{
struct mt7530_priv *priv = ds->priv;
-@@ -3198,7 +3171,6 @@ const struct mt753x_info mt753x_table[]
+@@ -3359,7 +3332,6 @@ const struct mt753x_info mt753x_table[]
.phy_write_c22 = mt7530_phy_write_c22,
.phy_read_c45 = mt7530_phy_read_c45,
.phy_write_c45 = mt7530_phy_write_c45,
@@ -91,7 +91,7 @@ Signed-off-by: Jakub Kicinski <kuba at kernel.org>
.mac_port_get_caps = mt7530_mac_port_get_caps,
.mac_port_config = mt7530_mac_config,
},
-@@ -3210,7 +3182,6 @@ const struct mt753x_info mt753x_table[]
+@@ -3371,7 +3343,6 @@ const struct mt753x_info mt753x_table[]
.phy_write_c22 = mt7530_phy_write_c22,
.phy_read_c45 = mt7530_phy_read_c45,
.phy_write_c45 = mt7530_phy_write_c45,
@@ -99,7 +99,7 @@ Signed-off-by: Jakub Kicinski <kuba at kernel.org>
.mac_port_get_caps = mt7530_mac_port_get_caps,
.mac_port_config = mt7530_mac_config,
},
-@@ -3222,7 +3193,6 @@ const struct mt753x_info mt753x_table[]
+@@ -3383,7 +3354,6 @@ const struct mt753x_info mt753x_table[]
.phy_write_c22 = mt7531_ind_c22_phy_write,
.phy_read_c45 = mt7531_ind_c45_phy_read,
.phy_write_c45 = mt7531_ind_c45_phy_write,
@@ -107,7 +107,7 @@ Signed-off-by: Jakub Kicinski <kuba at kernel.org>
.cpu_port_config = mt7531_cpu_port_config,
.mac_port_get_caps = mt7531_mac_port_get_caps,
.mac_port_config = mt7531_mac_config,
-@@ -3235,7 +3205,6 @@ const struct mt753x_info mt753x_table[]
+@@ -3396,7 +3366,6 @@ const struct mt753x_info mt753x_table[]
.phy_write_c22 = mt7531_ind_c22_phy_write,
.phy_read_c45 = mt7531_ind_c45_phy_read,
.phy_write_c45 = mt7531_ind_c45_phy_write,
@@ -115,7 +115,7 @@ Signed-off-by: Jakub Kicinski <kuba at kernel.org>
.cpu_port_config = mt7988_cpu_port_config,
.mac_port_get_caps = mt7988_mac_port_get_caps,
.mac_port_config = mt7988_mac_config,
-@@ -3265,9 +3234,8 @@ mt7530_probe_common(struct mt7530_priv *
+@@ -3426,9 +3395,8 @@ mt7530_probe_common(struct mt7530_priv *
/* Sanity check if these required device operations are filled
* properly.
*/
@@ -129,7 +129,7 @@ Signed-off-by: Jakub Kicinski <kuba at kernel.org>
--- a/drivers/net/dsa/mt7530.h
+++ b/drivers/net/dsa/mt7530.h
-@@ -724,8 +724,6 @@ struct mt753x_pcs {
+@@ -729,8 +729,6 @@ struct mt753x_pcs {
* @phy_write_c22: Holding the way writing PHY port using C22
* @phy_read_c45: Holding the way reading PHY port using C45
* @phy_write_c45: Holding the way writing PHY port using C45
@@ -138,7 +138,7 @@ Signed-off-by: Jakub Kicinski <kuba at kernel.org>
* @phy_mode_supported: Check if the PHY type is being supported on a certain
* port
* @mac_port_validate: Holding the way to set addition validate type for a
-@@ -746,7 +744,6 @@ struct mt753x_info {
+@@ -751,7 +749,6 @@ struct mt753x_info {
int regnum);
int (*phy_write_c45)(struct mt7530_priv *priv, int port, int devad,
int regnum, u16 val);
diff --git a/target/linux/generic/backport-6.6/790-17-v6.9-net-dsa-mt7530-correct-port-capabilities-of-MT7988.patch b/target/linux/generic/backport-6.6/790-17-v6.9-net-dsa-mt7530-correct-port-capabilities-of-MT7988.patch
index b707c3f6e9..19577a375b 100644
--- a/target/linux/generic/backport-6.6/790-17-v6.9-net-dsa-mt7530-correct-port-capabilities-of-MT7988.patch
+++ b/target/linux/generic/backport-6.6/790-17-v6.9-net-dsa-mt7530-correct-port-capabilities-of-MT7988.patch
@@ -25,7 +25,7 @@ Signed-off-by: Jakub Kicinski <kuba at kernel.org>
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
-@@ -2613,7 +2613,7 @@ static void mt7988_mac_port_get_caps(str
+@@ -2774,7 +2774,7 @@ static void mt7988_mac_port_get_caps(str
switch (port) {
/* Ports which are connected to switch PHYs. There is no MII pinout. */
diff --git a/target/linux/generic/backport-6.6/790-18-v6.9-net-dsa-mt7530-do-not-clear-config-supported_interfa.patch b/target/linux/generic/backport-6.6/790-18-v6.9-net-dsa-mt7530-do-not-clear-config-supported_interfa.patch
index 4d781836da..1b45cc50ce 100644
--- a/target/linux/generic/backport-6.6/790-18-v6.9-net-dsa-mt7530-do-not-clear-config-supported_interfa.patch
+++ b/target/linux/generic/backport-6.6/790-18-v6.9-net-dsa-mt7530-do-not-clear-config-supported_interfa.patch
@@ -27,7 +27,7 @@ Signed-off-by: Jakub Kicinski <kuba at kernel.org>
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
-@@ -2609,8 +2609,6 @@ static void mt7531_mac_port_get_caps(str
+@@ -2770,8 +2770,6 @@ static void mt7531_mac_port_get_caps(str
static void mt7988_mac_port_get_caps(struct dsa_switch *ds, int port,
struct phylink_config *config)
{
diff --git a/target/linux/generic/backport-6.6/790-19-v6.9-net-dsa-mt7530-remove-.mac_port_config-for-MT7988-an.patch b/target/linux/generic/backport-6.6/790-19-v6.9-net-dsa-mt7530-remove-.mac_port_config-for-MT7988-an.patch
index d05b8ea5b9..90cdf29d8f 100644
--- a/target/linux/generic/backport-6.6/790-19-v6.9-net-dsa-mt7530-remove-.mac_port_config-for-MT7988-an.patch
+++ b/target/linux/generic/backport-6.6/790-19-v6.9-net-dsa-mt7530-remove-.mac_port_config-for-MT7988-an.patch
@@ -33,7 +33,7 @@ Signed-off-by: Paolo Abeni <pabeni at redhat.com>
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
-@@ -2692,17 +2692,6 @@ static bool mt753x_is_mac_port(u32 port)
+@@ -2853,17 +2853,6 @@ static bool mt753x_is_mac_port(u32 port)
}
static int
@@ -51,7 +51,7 @@ Signed-off-by: Paolo Abeni <pabeni at redhat.com>
mt7531_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
phy_interface_t interface)
{
-@@ -2742,6 +2731,9 @@ mt753x_mac_config(struct dsa_switch *ds,
+@@ -2903,6 +2892,9 @@ mt753x_mac_config(struct dsa_switch *ds,
{
struct mt7530_priv *priv = ds->priv;
@@ -61,7 +61,7 @@ Signed-off-by: Paolo Abeni <pabeni at redhat.com>
return priv->info->mac_port_config(ds, port, mode, state->interface);
}
-@@ -3205,7 +3197,6 @@ const struct mt753x_info mt753x_table[]
+@@ -3366,7 +3358,6 @@ const struct mt753x_info mt753x_table[]
.phy_write_c45 = mt7531_ind_c45_phy_write,
.cpu_port_config = mt7988_cpu_port_config,
.mac_port_get_caps = mt7988_mac_port_get_caps,
@@ -69,7 +69,7 @@ Signed-off-by: Paolo Abeni <pabeni at redhat.com>
},
};
EXPORT_SYMBOL_GPL(mt753x_table);
-@@ -3233,8 +3224,7 @@ mt7530_probe_common(struct mt7530_priv *
+@@ -3394,8 +3385,7 @@ mt7530_probe_common(struct mt7530_priv *
* properly.
*/
if (!priv->info->sw_setup || !priv->info->phy_read_c22 ||
diff --git a/target/linux/generic/backport-6.6/790-20-v6.9-net-dsa-mt7530-set-interrupt-register-only-for-MT753.patch b/target/linux/generic/backport-6.6/790-20-v6.9-net-dsa-mt7530-set-interrupt-register-only-for-MT753.patch
index 143dd0dc1a..2d483ab403 100644
--- a/target/linux/generic/backport-6.6/790-20-v6.9-net-dsa-mt7530-set-interrupt-register-only-for-MT753.patch
+++ b/target/linux/generic/backport-6.6/790-20-v6.9-net-dsa-mt7530-set-interrupt-register-only-for-MT753.patch
@@ -20,7 +20,7 @@ Signed-off-by: Paolo Abeni <pabeni at redhat.com>
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
-@@ -2091,7 +2091,7 @@ mt7530_setup_irq(struct mt7530_priv *pri
+@@ -2252,7 +2252,7 @@ mt7530_setup_irq(struct mt7530_priv *pri
}
/* This register must be set for MT7530 to properly fire interrupts */
diff --git a/target/linux/generic/backport-6.6/790-21-v6.9-net-dsa-mt7530-do-not-use-SW_PHY_RST-to-reset-MT7531.patch b/target/linux/generic/backport-6.6/790-21-v6.9-net-dsa-mt7530-do-not-use-SW_PHY_RST-to-reset-MT7531.patch
index 24d0ab1633..73519c3e2a 100644
--- a/target/linux/generic/backport-6.6/790-21-v6.9-net-dsa-mt7530-do-not-use-SW_PHY_RST-to-reset-MT7531.patch
+++ b/target/linux/generic/backport-6.6/790-21-v6.9-net-dsa-mt7530-do-not-use-SW_PHY_RST-to-reset-MT7531.patch
@@ -22,7 +22,7 @@ Signed-off-by: Paolo Abeni <pabeni at redhat.com>
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
-@@ -2487,14 +2487,12 @@ mt7531_setup(struct dsa_switch *ds)
+@@ -2648,14 +2648,12 @@ mt7531_setup(struct dsa_switch *ds)
val = mt7530_read(priv, MT7531_TOP_SIG_SR);
priv->p5_sgmii = !!(val & PAD_DUAL_SGMII_EN);
diff --git a/target/linux/generic/backport-6.6/790-22-v6.9-net-dsa-mt7530-get-rid-of-useless-error-returns-on-p.patch b/target/linux/generic/backport-6.6/790-22-v6.9-net-dsa-mt7530-get-rid-of-useless-error-returns-on-p.patch
index e311a9314f..0b2b3b5b33 100644
--- a/target/linux/generic/backport-6.6/790-22-v6.9-net-dsa-mt7530-get-rid-of-useless-error-returns-on-p.patch
+++ b/target/linux/generic/backport-6.6/790-22-v6.9-net-dsa-mt7530-get-rid-of-useless-error-returns-on-p.patch
@@ -36,7 +36,7 @@ Signed-off-by: Paolo Abeni <pabeni at redhat.com>
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
-@@ -2623,7 +2623,7 @@ static void mt7988_mac_port_get_caps(str
+@@ -2784,7 +2784,7 @@ static void mt7988_mac_port_get_caps(str
}
}
@@ -45,7 +45,7 @@ Signed-off-by: Paolo Abeni <pabeni at redhat.com>
mt7530_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
phy_interface_t interface)
{
-@@ -2633,22 +2633,14 @@ mt7530_mac_config(struct dsa_switch *ds,
+@@ -2794,22 +2794,14 @@ mt7530_mac_config(struct dsa_switch *ds,
mt7530_setup_port5(priv->ds, interface);
else if (port == 6)
mt7530_setup_port6(priv->ds, interface);
@@ -71,7 +71,7 @@ Signed-off-by: Paolo Abeni <pabeni at redhat.com>
val = mt7530_read(priv, MT7531_CLKGEN_CTRL);
val |= GP_CLK_EN;
val &= ~GP_MODE_MASK;
-@@ -2676,20 +2668,14 @@ static int mt7531_rgmii_setup(struct mt7
+@@ -2837,20 +2829,14 @@ static int mt7531_rgmii_setup(struct mt7
case PHY_INTERFACE_MODE_RGMII_ID:
break;
default:
@@ -95,7 +95,7 @@ Signed-off-by: Paolo Abeni <pabeni at redhat.com>
mt7531_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
phy_interface_t interface)
{
-@@ -2697,42 +2683,21 @@ mt7531_mac_config(struct dsa_switch *ds,
+@@ -2858,42 +2844,21 @@ mt7531_mac_config(struct dsa_switch *ds,
struct phy_device *phydev;
struct dsa_port *dp;
@@ -143,7 +143,7 @@ Signed-off-by: Paolo Abeni <pabeni at redhat.com>
}
static struct phylink_pcs *
-@@ -2761,17 +2726,11 @@ mt753x_phylink_mac_config(struct dsa_swi
+@@ -2922,17 +2887,11 @@ mt753x_phylink_mac_config(struct dsa_swi
u32 mcr_cur, mcr_new;
switch (port) {
@@ -162,7 +162,7 @@ Signed-off-by: Paolo Abeni <pabeni at redhat.com>
if (priv->p5_intf_sel != P5_DISABLED)
priv->p5_interface = state->interface;
-@@ -2780,16 +2739,10 @@ mt753x_phylink_mac_config(struct dsa_swi
+@@ -2941,16 +2900,10 @@ mt753x_phylink_mac_config(struct dsa_swi
if (priv->p6_interface == state->interface)
break;
@@ -180,7 +180,7 @@ Signed-off-by: Paolo Abeni <pabeni at redhat.com>
}
mcr_cur = mt7530_read(priv, MT7530_PMCR_P(port));
-@@ -2872,7 +2825,6 @@ mt7531_cpu_port_config(struct dsa_switch
+@@ -3033,7 +2986,6 @@ mt7531_cpu_port_config(struct dsa_switch
struct mt7530_priv *priv = ds->priv;
phy_interface_t interface;
int speed;
@@ -188,7 +188,7 @@ Signed-off-by: Paolo Abeni <pabeni at redhat.com>
switch (port) {
case 5:
-@@ -2897,9 +2849,8 @@ mt7531_cpu_port_config(struct dsa_switch
+@@ -3058,9 +3010,8 @@ mt7531_cpu_port_config(struct dsa_switch
else
speed = SPEED_1000;
@@ -202,7 +202,7 @@ Signed-off-by: Paolo Abeni <pabeni at redhat.com>
mt753x_phylink_mac_link_up(ds, port, MLO_AN_FIXED, interface, NULL,
--- a/drivers/net/dsa/mt7530.h
+++ b/drivers/net/dsa/mt7530.h
-@@ -750,9 +750,9 @@ struct mt753x_info {
+@@ -755,9 +755,9 @@ struct mt753x_info {
void (*mac_port_validate)(struct dsa_switch *ds, int port,
phy_interface_t interface,
unsigned long *supported);
diff --git a/target/linux/generic/backport-6.6/790-23-v6.9-net-dsa-mt7530-get-rid-of-priv-info-cpu_port_config.patch b/target/linux/generic/backport-6.6/790-23-v6.9-net-dsa-mt7530-get-rid-of-priv-info-cpu_port_config.patch
index e07a7ee71b..27f29beee1 100644
--- a/target/linux/generic/backport-6.6/790-23-v6.9-net-dsa-mt7530-get-rid-of-priv-info-cpu_port_config.patch
+++ b/target/linux/generic/backport-6.6/790-23-v6.9-net-dsa-mt7530-get-rid-of-priv-info-cpu_port_config.patch
@@ -57,8 +57,8 @@ Signed-off-by: Paolo Abeni <pabeni at redhat.com>
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
-@@ -1002,18 +1002,10 @@ mt753x_trap_frames(struct mt7530_priv *p
- MT753X_BPDU_CPU_ONLY);
+@@ -1163,18 +1163,10 @@ mt753x_trap_frames(struct mt7530_priv *p
+ MT753X_BPDU_CPU_ONLY);
}
-static int
@@ -77,7 +77,7 @@ Signed-off-by: Paolo Abeni <pabeni at redhat.com>
/* Enable Mediatek header mode on the cpu port */
mt7530_write(priv, MT7530_PVC_P(port),
-@@ -1039,8 +1031,6 @@ mt753x_cpu_port_enable(struct dsa_switch
+@@ -1200,8 +1192,6 @@ mt753x_cpu_port_enable(struct dsa_switch
/* Set to fallback mode for independent VLAN learning */
mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK,
MT7530_PORT_FALLBACK_MODE);
@@ -86,7 +86,7 @@ Signed-off-by: Paolo Abeni <pabeni at redhat.com>
}
static int
-@@ -2297,8 +2287,6 @@ mt7530_setup(struct dsa_switch *ds)
+@@ -2458,8 +2448,6 @@ mt7530_setup(struct dsa_switch *ds)
val |= MHWTRAP_MANUAL;
mt7530_write(priv, MT7530_MHWTRAP, val);
@@ -95,7 +95,7 @@ Signed-off-by: Paolo Abeni <pabeni at redhat.com>
mt753x_trap_frames(priv);
/* Enable and reset MIB counters */
-@@ -2313,9 +2301,7 @@ mt7530_setup(struct dsa_switch *ds)
+@@ -2474,9 +2462,7 @@ mt7530_setup(struct dsa_switch *ds)
mt7530_set(priv, MT7530_PSC_P(i), SA_DIS);
if (dsa_is_cpu_port(ds, i)) {
@@ -106,7 +106,7 @@ Signed-off-by: Paolo Abeni <pabeni at redhat.com>
} else {
mt7530_port_disable(ds, i);
-@@ -2419,9 +2405,7 @@ mt7531_setup_common(struct dsa_switch *d
+@@ -2580,9 +2566,7 @@ mt7531_setup_common(struct dsa_switch *d
mt7530_set(priv, MT7531_DBG_CNT(i), MT7531_DIS_CLR);
if (dsa_is_cpu_port(ds, i)) {
@@ -117,7 +117,7 @@ Signed-off-by: Paolo Abeni <pabeni at redhat.com>
} else {
mt7530_port_disable(ds, i);
-@@ -2510,10 +2494,6 @@ mt7531_setup(struct dsa_switch *ds)
+@@ -2671,10 +2655,6 @@ mt7531_setup(struct dsa_switch *ds)
mt7530_rmw(priv, MT7531_GPIO_MODE0, MT7531_GPIO0_MASK,
MT7531_GPIO0_INTERRUPT);
@@ -128,7 +128,7 @@ Signed-off-by: Paolo Abeni <pabeni at redhat.com>
/* Enable PHY core PLL, since phy_device has not yet been created
* provided for phy_[read,write]_mmd_indirect is called, we provide
* our own mt7531_ind_mmd_phy_[read,write] to complete this
-@@ -2725,26 +2705,9 @@ mt753x_phylink_mac_config(struct dsa_swi
+@@ -2886,26 +2866,9 @@ mt753x_phylink_mac_config(struct dsa_swi
struct mt7530_priv *priv = ds->priv;
u32 mcr_cur, mcr_new;
@@ -156,7 +156,7 @@ Signed-off-by: Paolo Abeni <pabeni at redhat.com>
mcr_cur = mt7530_read(priv, MT7530_PMCR_P(port));
mcr_new = mcr_cur;
mcr_new &= ~PMCR_LINK_SETTINGS_MASK;
-@@ -2780,17 +2743,10 @@ static void mt753x_phylink_mac_link_up(s
+@@ -2941,17 +2904,10 @@ static void mt753x_phylink_mac_link_up(s
mcr = PMCR_RX_EN | PMCR_TX_EN | PMCR_FORCE_LNK;
@@ -176,7 +176,7 @@ Signed-off-by: Paolo Abeni <pabeni at redhat.com>
mcr |= PMCR_FORCE_SPEED_1000;
break;
case SPEED_100:
-@@ -2808,6 +2764,7 @@ static void mt753x_phylink_mac_link_up(s
+@@ -2969,6 +2925,7 @@ static void mt753x_phylink_mac_link_up(s
if (mode == MLO_AN_PHY && phydev && phy_init_eee(phydev, false) >= 0) {
switch (speed) {
case SPEED_1000:
@@ -184,7 +184,7 @@ Signed-off-by: Paolo Abeni <pabeni at redhat.com>
mcr |= PMCR_FORCE_EEE1G;
break;
case SPEED_100:
-@@ -2819,61 +2776,6 @@ static void mt753x_phylink_mac_link_up(s
+@@ -2980,61 +2937,6 @@ static void mt753x_phylink_mac_link_up(s
mt7530_set(priv, MT7530_PMCR_P(port), mcr);
}
@@ -246,7 +246,7 @@ Signed-off-by: Paolo Abeni <pabeni at redhat.com>
static void mt753x_phylink_get_caps(struct dsa_switch *ds, int port,
struct phylink_config *config)
{
-@@ -3132,7 +3034,6 @@ const struct mt753x_info mt753x_table[]
+@@ -3293,7 +3195,6 @@ const struct mt753x_info mt753x_table[]
.phy_write_c22 = mt7531_ind_c22_phy_write,
.phy_read_c45 = mt7531_ind_c45_phy_read,
.phy_write_c45 = mt7531_ind_c45_phy_write,
@@ -254,7 +254,7 @@ Signed-off-by: Paolo Abeni <pabeni at redhat.com>
.mac_port_get_caps = mt7531_mac_port_get_caps,
.mac_port_config = mt7531_mac_config,
},
-@@ -3144,7 +3045,6 @@ const struct mt753x_info mt753x_table[]
+@@ -3305,7 +3206,6 @@ const struct mt753x_info mt753x_table[]
.phy_write_c22 = mt7531_ind_c22_phy_write,
.phy_read_c45 = mt7531_ind_c45_phy_read,
.phy_write_c45 = mt7531_ind_c45_phy_write,
@@ -264,7 +264,7 @@ Signed-off-by: Paolo Abeni <pabeni at redhat.com>
};
--- a/drivers/net/dsa/mt7530.h
+++ b/drivers/net/dsa/mt7530.h
-@@ -331,13 +331,6 @@ enum mt7530_vlan_port_acc_frm {
+@@ -336,13 +336,6 @@ enum mt7530_vlan_port_acc_frm {
PMCR_TX_FC_EN | PMCR_RX_FC_EN | \
PMCR_FORCE_FDX | PMCR_FORCE_LNK | \
PMCR_FORCE_EEE1G | PMCR_FORCE_EEE100)
@@ -278,7 +278,7 @@ Signed-off-by: Paolo Abeni <pabeni at redhat.com>
#define MT7530_PMEEECR_P(x) (0x3004 + (x) * 0x100)
#define WAKEUP_TIME_1000(x) (((x) & 0xFF) << 24)
-@@ -744,7 +737,6 @@ struct mt753x_info {
+@@ -749,7 +742,6 @@ struct mt753x_info {
int regnum);
int (*phy_write_c45)(struct mt7530_priv *priv, int port, int devad,
int regnum, u16 val);
@@ -286,7 +286,7 @@ Signed-off-by: Paolo Abeni <pabeni at redhat.com>
void (*mac_port_get_caps)(struct dsa_switch *ds, int port,
struct phylink_config *config);
void (*mac_port_validate)(struct dsa_switch *ds, int port,
-@@ -770,7 +762,6 @@ struct mt753x_info {
+@@ -775,7 +767,6 @@ struct mt753x_info {
* @ports: Holding the state among ports
* @reg_mutex: The lock for protecting among process accessing
* registers
@@ -294,7 +294,7 @@ Signed-off-by: Paolo Abeni <pabeni at redhat.com>
* @p5_intf_sel: Holding the current port 5 interface select
* @p5_sgmii: Flag for distinguishing if port 5 of the MT7531 switch
* has got SGMII
-@@ -792,8 +783,6 @@ struct mt7530_priv {
+@@ -797,8 +788,6 @@ struct mt7530_priv {
const struct mt753x_info *info;
unsigned int id;
bool mcm;
diff --git a/target/linux/generic/backport-6.6/790-24-v6.9-net-dsa-mt7530-get-rid-of-mt753x_mac_config.patch b/target/linux/generic/backport-6.6/790-24-v6.9-net-dsa-mt7530-get-rid-of-mt753x_mac_config.patch
index 95226ace49..97b63b6df5 100644
--- a/target/linux/generic/backport-6.6/790-24-v6.9-net-dsa-mt7530-get-rid-of-mt753x_mac_config.patch
+++ b/target/linux/generic/backport-6.6/790-24-v6.9-net-dsa-mt7530-get-rid-of-mt753x_mac_config.patch
@@ -18,7 +18,7 @@ Signed-off-by: Paolo Abeni <pabeni at redhat.com>
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
-@@ -2670,16 +2670,6 @@ mt7531_mac_config(struct dsa_switch *ds,
+@@ -2831,16 +2831,6 @@ mt7531_mac_config(struct dsa_switch *ds,
}
}
@@ -35,7 +35,7 @@ Signed-off-by: Paolo Abeni <pabeni at redhat.com>
static struct phylink_pcs *
mt753x_phylink_mac_select_pcs(struct dsa_switch *ds, int port,
phy_interface_t interface)
-@@ -2705,8 +2695,8 @@ mt753x_phylink_mac_config(struct dsa_swi
+@@ -2866,8 +2856,8 @@ mt753x_phylink_mac_config(struct dsa_swi
struct mt7530_priv *priv = ds->priv;
u32 mcr_cur, mcr_new;
diff --git a/target/linux/generic/backport-6.6/790-25-v6.9-net-dsa-mt7530-put-initialising-PCS-devices-code-bac.patch b/target/linux/generic/backport-6.6/790-25-v6.9-net-dsa-mt7530-put-initialising-PCS-devices-code-bac.patch
index 44668444cf..c130f2aaca 100644
--- a/target/linux/generic/backport-6.6/790-25-v6.9-net-dsa-mt7530-put-initialising-PCS-devices-code-bac.patch
+++ b/target/linux/generic/backport-6.6/790-25-v6.9-net-dsa-mt7530-put-initialising-PCS-devices-code-bac.patch
@@ -20,7 +20,7 @@ Signed-off-by: Paolo Abeni <pabeni at redhat.com>
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
-@@ -2848,17 +2848,9 @@ static int
+@@ -3009,17 +3009,9 @@ static int
mt753x_setup(struct dsa_switch *ds)
{
struct mt7530_priv *priv = ds->priv;
@@ -40,7 +40,7 @@ Signed-off-by: Paolo Abeni <pabeni at redhat.com>
if (ret)
return ret;
-@@ -2870,6 +2862,14 @@ mt753x_setup(struct dsa_switch *ds)
+@@ -3031,6 +3023,14 @@ mt753x_setup(struct dsa_switch *ds)
if (ret && priv->irq)
mt7530_free_irq_common(priv);
diff --git a/target/linux/generic/backport-6.6/790-26-v6.9-net-dsa-mt7530-sort-link-settings-ops-and-force-link.patch b/target/linux/generic/backport-6.6/790-26-v6.9-net-dsa-mt7530-sort-link-settings-ops-and-force-link.patch
index 4992230dc5..f07c6bd575 100644
--- a/target/linux/generic/backport-6.6/790-26-v6.9-net-dsa-mt7530-sort-link-settings-ops-and-force-link.patch
+++ b/target/linux/generic/backport-6.6/790-26-v6.9-net-dsa-mt7530-sort-link-settings-ops-and-force-link.patch
@@ -24,7 +24,7 @@ Signed-off-by: Paolo Abeni <pabeni at redhat.com>
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
-@@ -1054,7 +1054,6 @@ mt7530_port_enable(struct dsa_switch *ds
+@@ -1215,7 +1215,6 @@ mt7530_port_enable(struct dsa_switch *ds
priv->ports[port].enable = true;
mt7530_rmw(priv, MT7530_PCR_P(port), PCR_MATRIX_MASK,
priv->ports[port].pm);
@@ -32,7 +32,7 @@ Signed-off-by: Paolo Abeni <pabeni at redhat.com>
mutex_unlock(&priv->reg_mutex);
-@@ -1074,7 +1073,6 @@ mt7530_port_disable(struct dsa_switch *d
+@@ -1235,7 +1234,6 @@ mt7530_port_disable(struct dsa_switch *d
priv->ports[port].enable = false;
mt7530_rmw(priv, MT7530_PCR_P(port), PCR_MATRIX_MASK,
PCR_MATRIX_CLR);
@@ -40,7 +40,7 @@ Signed-off-by: Paolo Abeni <pabeni at redhat.com>
mutex_unlock(&priv->reg_mutex);
}
-@@ -2293,6 +2291,12 @@ mt7530_setup(struct dsa_switch *ds)
+@@ -2454,6 +2452,12 @@ mt7530_setup(struct dsa_switch *ds)
mt7530_mib_reset(ds);
for (i = 0; i < MT7530_NUM_PORTS; i++) {
@@ -53,7 +53,7 @@ Signed-off-by: Paolo Abeni <pabeni at redhat.com>
/* Disable forwarding by default on all ports */
mt7530_rmw(priv, MT7530_PCR_P(i), PCR_MATRIX_MASK,
PCR_MATRIX_CLR);
-@@ -2395,6 +2399,12 @@ mt7531_setup_common(struct dsa_switch *d
+@@ -2556,6 +2560,12 @@ mt7531_setup_common(struct dsa_switch *d
UNU_FFP_MASK);
for (i = 0; i < MT7530_NUM_PORTS; i++) {
diff --git a/target/linux/generic/backport-6.6/790-27-v6.9-net-dsa-mt7530-simplify-link-operations.patch b/target/linux/generic/backport-6.6/790-27-v6.9-net-dsa-mt7530-simplify-link-operations.patch
index ee5353673c..29536df9b8 100644
--- a/target/linux/generic/backport-6.6/790-27-v6.9-net-dsa-mt7530-simplify-link-operations.patch
+++ b/target/linux/generic/backport-6.6/790-27-v6.9-net-dsa-mt7530-simplify-link-operations.patch
@@ -45,7 +45,7 @@ Signed-off-by: Paolo Abeni <pabeni at redhat.com>
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
-@@ -2703,23 +2703,13 @@ mt753x_phylink_mac_config(struct dsa_swi
+@@ -2864,23 +2864,13 @@ mt753x_phylink_mac_config(struct dsa_swi
const struct phylink_link_state *state)
{
struct mt7530_priv *priv = ds->priv;
@@ -72,7 +72,7 @@ Signed-off-by: Paolo Abeni <pabeni at redhat.com>
static void mt753x_phylink_mac_link_down(struct dsa_switch *ds, int port,
--- a/drivers/net/dsa/mt7530.h
+++ b/drivers/net/dsa/mt7530.h
-@@ -324,8 +324,6 @@ enum mt7530_vlan_port_acc_frm {
+@@ -329,8 +329,6 @@ enum mt7530_vlan_port_acc_frm {
MT7531_FORCE_DPX | \
MT7531_FORCE_RX_FC | \
MT7531_FORCE_TX_FC)
diff --git a/target/linux/generic/backport-6.6/790-28-v6.9-net-dsa-mt7530-disable-LEDs-before-reset.patch b/target/linux/generic/backport-6.6/790-28-v6.9-net-dsa-mt7530-disable-LEDs-before-reset.patch
index 19a04a7164..9356a54c71 100644
--- a/target/linux/generic/backport-6.6/790-28-v6.9-net-dsa-mt7530-disable-LEDs-before-reset.patch
+++ b/target/linux/generic/backport-6.6/790-28-v6.9-net-dsa-mt7530-disable-LEDs-before-reset.patch
@@ -79,7 +79,7 @@ Signed-off-by: Jakub Kicinski <kuba at kernel.org>
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
-@@ -2228,6 +2228,12 @@ mt7530_setup(struct dsa_switch *ds)
+@@ -2389,6 +2389,12 @@ mt7530_setup(struct dsa_switch *ds)
}
}
diff --git a/target/linux/generic/backport-6.6/790-29-v6.9-net-dsa-mt7530-fix-improper-frames-on-all-25MHz-and-.patch b/target/linux/generic/backport-6.6/790-29-v6.9-net-dsa-mt7530-fix-improper-frames-on-all-25MHz-and-.patch
index 57a775da39..b8124cad23 100644
--- a/target/linux/generic/backport-6.6/790-29-v6.9-net-dsa-mt7530-fix-improper-frames-on-all-25MHz-and-.patch
+++ b/target/linux/generic/backport-6.6/790-29-v6.9-net-dsa-mt7530-fix-improper-frames-on-all-25MHz-and-.patch
@@ -53,7 +53,7 @@ Signed-off-by: Paolo Abeni <pabeni at redhat.com>
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
-@@ -2274,8 +2274,6 @@ mt7530_setup(struct dsa_switch *ds)
+@@ -2435,8 +2435,6 @@ mt7530_setup(struct dsa_switch *ds)
SYS_CTRL_PHY_RST | SYS_CTRL_SW_RST |
SYS_CTRL_REG_RST);
@@ -62,7 +62,7 @@ Signed-off-by: Paolo Abeni <pabeni at redhat.com>
/* Lower Tx driving for TRGMII path */
for (i = 0; i < NUM_TRGMII_CTRL; i++)
mt7530_write(priv, MT7530_TRGMII_TD_ODT(i),
-@@ -2291,6 +2289,9 @@ mt7530_setup(struct dsa_switch *ds)
+@@ -2452,6 +2450,9 @@ mt7530_setup(struct dsa_switch *ds)
val |= MHWTRAP_MANUAL;
mt7530_write(priv, MT7530_MHWTRAP, val);
diff --git a/target/linux/generic/backport-6.6/790-30-v6.9-net-dsa-mt7530-prevent-possible-incorrect-XTAL-frequ.patch b/target/linux/generic/backport-6.6/790-30-v6.9-net-dsa-mt7530-prevent-possible-incorrect-XTAL-frequ.patch
index f1c4db49dc..6c813ed3ff 100644
--- a/target/linux/generic/backport-6.6/790-30-v6.9-net-dsa-mt7530-prevent-possible-incorrect-XTAL-frequ.patch
+++ b/target/linux/generic/backport-6.6/790-30-v6.9-net-dsa-mt7530-prevent-possible-incorrect-XTAL-frequ.patch
@@ -139,7 +139,7 @@ Signed-off-by: David S. Miller <davem at davemloft.net>
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
-@@ -2228,12 +2228,6 @@ mt7530_setup(struct dsa_switch *ds)
+@@ -2389,12 +2389,6 @@ mt7530_setup(struct dsa_switch *ds)
}
}
diff --git a/target/linux/generic/pending-6.6/610-netfilter_match_bypass_default_checks.patch b/target/linux/generic/pending-6.6/610-netfilter_match_bypass_default_checks.patch
index 0717c4dc1f..fd22200a84 100644
--- a/target/linux/generic/pending-6.6/610-netfilter_match_bypass_default_checks.patch
+++ b/target/linux/generic/pending-6.6/610-netfilter_match_bypass_default_checks.patch
@@ -91,7 +91,7 @@ Signed-off-by: Felix Fietkau <nbd at nbd.name>
for (i = sizeof(struct ipt_entry);
i < e->target_offset;
i += m->u.match_size) {
-@@ -1223,12 +1260,15 @@ compat_copy_entry_to_user(struct ipt_ent
+@@ -1225,12 +1262,15 @@ compat_copy_entry_to_user(struct ipt_ent
compat_uint_t origsize;
const struct xt_entry_match *ematch;
int ret = 0;
diff --git a/target/linux/generic/pending-6.6/795-net-dsa-mt7530-fix-enabling-EEE-on-MT7531-switch-on-.patch b/target/linux/generic/pending-6.6/795-net-dsa-mt7530-fix-enabling-EEE-on-MT7531-switch-on-.patch
index 17f03b48a4..9a4d4a918a 100644
--- a/target/linux/generic/pending-6.6/795-net-dsa-mt7530-fix-enabling-EEE-on-MT7531-switch-on-.patch
+++ b/target/linux/generic/pending-6.6/795-net-dsa-mt7530-fix-enabling-EEE-on-MT7531-switch-on-.patch
@@ -49,7 +49,7 @@ Signed-off-by: Arınç ÜNAL <arinc.unal at arinc9.com>
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
-@@ -2505,18 +2505,25 @@ mt7531_setup(struct dsa_switch *ds)
+@@ -2666,18 +2666,25 @@ mt7531_setup(struct dsa_switch *ds)
mt7530_rmw(priv, MT7531_GPIO_MODE0, MT7531_GPIO0_MASK,
MT7531_GPIO0_INTERRUPT);
@@ -82,7 +82,7 @@ Signed-off-by: Arınç ÜNAL <arinc.unal at arinc9.com>
/* Setup VLAN ID 0 for VLAN-unaware bridges */
--- a/drivers/net/dsa/mt7530.h
+++ b/drivers/net/dsa/mt7530.h
-@@ -616,6 +616,7 @@ enum mt7531_clk_skew {
+@@ -621,6 +621,7 @@ enum mt7531_clk_skew {
#define RG_SYSPLL_DDSFBK_EN BIT(12)
#define RG_SYSPLL_BIAS_EN BIT(11)
#define RG_SYSPLL_BIAS_LPF_EN BIT(10)
diff --git a/target/linux/generic/pending-6.6/796-net-dsa-mt7530-trap-link-local-frames-regardless-of-.patch b/target/linux/generic/pending-6.6/796-net-dsa-mt7530-trap-link-local-frames-regardless-of-.patch
deleted file mode 100644
index d88060896b..0000000000
--- a/target/linux/generic/pending-6.6/796-net-dsa-mt7530-trap-link-local-frames-regardless-of-.patch
+++ /dev/null
@@ -1,483 +0,0 @@
-From b7427d66cb3d6dca5165de5f7d80d59f08c2795b Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal at arinc9.com>
-Date: Tue, 9 Apr 2024 18:01:14 +0300
-Subject: [PATCH 2/2] net: dsa: mt7530: trap link-local frames regardless of ST
- Port State
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-In Clause 5 of IEEE Std 802-2014, two sublayers of the data link layer
-(DLL) of the Open Systems Interconnection basic reference model (OSI/RM)
-are described; the medium access control (MAC) and logical link control
-(LLC) sublayers. The MAC sublayer is the one facing the physical layer.
-
-In 8.2 of IEEE Std 802.1Q-2022, the Bridge architecture is described. A
-Bridge component comprises a MAC Relay Entity for interconnecting the Ports
-of the Bridge, at least two Ports, and higher layer entities with at least
-a Spanning Tree Protocol Entity included.
-
-Each Bridge Port also functions as an end station and shall provide the MAC
-Service to an LLC Entity. Each instance of the MAC Service is provided to a
-distinct LLC Entity that supports protocol identification, multiplexing,
-and demultiplexing, for protocol data unit (PDU) transmission and reception
-by one or more higher layer entities.
-
-It is described in 8.13.9 of IEEE Std 802.1Q-2022 that in a Bridge, the LLC
-Entity associated with each Bridge Port is modeled as being directly
-connected to the attached Local Area Network (LAN).
-
-On the switch with CPU port architecture, CPU port functions as Management
-Port, and the Management Port functionality is provided by software which
-functions as an end station. Software is connected to an IEEE 802 LAN that
-is wholly contained within the system that incorporates the Bridge.
-Software provides access to the LLC Entity associated with each Bridge Port
-by the value of the source port field on the special tag on the frame
-received by software.
-
-We call frames that carry control information to determine the active
-topology and current extent of each Virtual Local Area Network (VLAN),
-i.e., spanning tree or Shortest Path Bridging (SPB) and Multiple VLAN
-Registration Protocol Data Units (MVRPDUs), and frames from other link
-constrained protocols, such as Extensible Authentication Protocol over LAN
-(EAPOL) and Link Layer Discovery Protocol (LLDP), link-local frames. They
-are not forwarded by a Bridge. Permanently configured entries in the
-filtering database (FDB) ensure that such frames are discarded by the
-Forwarding Process. In 8.6.3 of IEEE Std 802.1Q-2022, this is described in
-detail:
-
-Each of the reserved MAC addresses specified in Table 8-1
-(01-80-C2-00-00-[00,01,02,03,04,05,06,07,08,09,0A,0B,0C,0D,0E,0F]) shall be
-permanently configured in the FDB in C-VLAN components and ERs.
-
-Each of the reserved MAC addresses specified in Table 8-2
-(01-80-C2-00-00-[01,02,03,04,05,06,07,08,09,0A,0E]) shall be permanently
-configured in the FDB in S-VLAN components.
-
-Each of the reserved MAC addresses specified in Table 8-3
-(01-80-C2-00-00-[01,02,04,0E]) shall be permanently configured in the FDB
-in TPMR components.
-
-The FDB entries for reserved MAC addresses shall specify filtering for all
-Bridge Ports and all VIDs. Management shall not provide the capability to
-modify or remove entries for reserved MAC addresses.
-
-The addresses in Table 8-1, Table 8-2, and Table 8-3 determine the scope of
-propagation of PDUs within a Bridged Network, as follows:
-
- The Nearest Bridge group address (01-80-C2-00-00-0E) is an address that
- no conformant Two-Port MAC Relay (TPMR) component, Service VLAN (S-VLAN)
- component, Customer VLAN (C-VLAN) component, or MAC Bridge can forward.
- PDUs transmitted using this destination address, or any other addresses
- that appear in Table 8-1, Table 8-2, and Table 8-3
- (01-80-C2-00-00-[00,01,02,03,04,05,06,07,08,09,0A,0B,0C,0D,0E,0F]), can
- therefore travel no further than those stations that can be reached via a
- single individual LAN from the originating station.
-
- The Nearest non-TPMR Bridge group address (01-80-C2-00-00-03), is an
- address that no conformant S-VLAN component, C-VLAN component, or MAC
- Bridge can forward; however, this address is relayed by a TPMR component.
- PDUs using this destination address, or any of the other addresses that
- appear in both Table 8-1 and Table 8-2 but not in Table 8-3
- (01-80-C2-00-00-[00,03,05,06,07,08,09,0A,0B,0C,0D,0F]), will be relayed
- by any TPMRs but will propagate no further than the nearest S-VLAN
- component, C-VLAN component, or MAC Bridge.
-
- The Nearest Customer Bridge group address (01-80-C2-00-00-00) is an
- address that no conformant C-VLAN component, MAC Bridge can forward;
- however, it is relayed by TPMR components and S-VLAN components. PDUs
- using this destination address, or any of the other addresses that appear
- in Table 8-1 but not in either Table 8-2 or Table 8-3
- (01-80-C2-00-00-[00,0B,0C,0D,0F]), will be relayed by TPMR components and
- S-VLAN components but will propagate no further than the nearest C-VLAN
- component or MAC Bridge.
-
-Because the LLC Entity associated with each Bridge Port is provided via CPU
-port, we must not filter these frames but forward them to CPU port.
-
-In a Bridge, the transmission Port is majorly decided by ingress and egress
-rules, FDB, and spanning tree Port State functions of the Forwarding
-Process. For link-local frames, only CPU port should be designated as
-destination port in the FDB, and the other functions of the Forwarding
-Process must not interfere with the decision of the transmission Port. We
-call this process trapping frames to CPU port.
-
-Therefore, on the switch with CPU port architecture, link-local frames must
-be trapped to CPU port, and certain link-local frames received by a Port of
-a Bridge comprising a TPMR component or an S-VLAN component must be
-excluded from it.
-
-A Bridge of the switch with CPU port architecture cannot comprise a
-Two-Port MAC Relay (TPMR) component as a TPMR component supports only a
-subset of the functionality of a MAC Bridge. A Bridge comprising two Ports
-(Management Port doesn't count) of this architecture will either function
-as a standard MAC Bridge or a standard VLAN Bridge.
-
-Therefore, a Bridge of this architecture can only comprise S-VLAN
-components, C-VLAN components, or MAC Bridge components. Since there's no
-TPMR component, we don't need to relay PDUs using the destination addresses
-specified on the Nearest non-TPMR section, and the proportion of the
-Nearest Customer Bridge section where they must be relayed by TPMR
-components.
-
-One option to trap link-local frames to CPU port is to add static FDB
-entries with CPU port designated as destination port. However, because that
-Independent VLAN Learning (IVL) is being used on every VID, each entry only
-applies to a single VLAN Identifier (VID). For a Bridge comprising a MAC
-Bridge component or a C-VLAN component, there would have to be 16 times
-4096 entries. This switch intellectual property can only hold a maximum of
-2048 entries. Using this option, there also isn't a mechanism to prevent
-link-local frames from being discarded when the spanning tree Port State of
-the reception Port is discarding.
-
-The remaining option is to utilise the BPC, RGAC1, RGAC2, RGAC3, and RGAC4
-registers. Whilst this applies to every VID, it doesn't contain all of the
-reserved MAC addresses without affecting the remaining Standard Group MAC
-Addresses. The REV_UN frame tag utilised using the RGAC4 register covers
-the remaining 01-80-C2-00-00-[04,05,06,07,08,09,0A,0B,0C,0D,0F] destination
-addresses. It also includes the 01-80-C2-00-00-22 to 01-80-C2-00-00-FF
-destination addresses which may be relayed by MAC Bridges or VLAN Bridges.
-The latter option provides better but not complete conformance.
-
-This switch intellectual property also does not provide a mechanism to trap
-link-local frames with specific destination addresses to CPU port by
-Bridge, to conform to the filtering rules for the distinct Bridge
-components.
-
-Therefore, regardless of the type of the Bridge component, link-local
-frames with these destination addresses will be trapped to CPU port:
-
-01-80-C2-00-00-[00,01,02,03,0E]
-
-In a Bridge comprising a MAC Bridge component or a C-VLAN component:
-
- Link-local frames with these destination addresses won't be trapped to
- CPU port which won't conform to IEEE Std 802.1Q-2022:
-
- 01-80-C2-00-00-[04,05,06,07,08,09,0A,0B,0C,0D,0F]
-
-In a Bridge comprising an S-VLAN component:
-
- Link-local frames with these destination addresses will be trapped to CPU
- port which won't conform to IEEE Std 802.1Q-2022:
-
- 01-80-C2-00-00-00
-
- Link-local frames with these destination addresses won't be trapped to
- CPU port which won't conform to IEEE Std 802.1Q-2022:
-
- 01-80-C2-00-00-[04,05,06,07,08,09,0A]
-
-Currently on this switch intellectual property, if the spanning tree Port
-State of the reception Port is discarding, link-local frames will be
-discarded.
-
-To trap link-local frames regardless of the spanning tree Port State, make
-the switch regard them as Bridge Protocol Data Units (BPDUs). This switch
-intellectual property only lets the frames regarded as BPDUs bypass the
-spanning tree Port State function of the Forwarding Process.
-
-With this change, the only remaining interference is the ingress rules.
-When the reception Port has no PVID assigned on software, VLAN-untagged
-frames won't be allowed in. There doesn't seem to be a mechanism on the
-switch intellectual property to have link-local frames bypass this function
-of the Forwarding Process.
-
-Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch")
-Reviewed-by: Daniel Golle <daniel at makrotopia.org>
-Signed-off-by: Arınç ÜNAL <arinc.unal at arinc9.com>
----
- drivers/net/dsa/mt7530.c | 229 +++++++++++++++++++++++++++++++++------
- drivers/net/dsa/mt7530.h | 5 +
- 2 files changed, 200 insertions(+), 34 deletions(-)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -950,20 +950,173 @@ static void mt7530_setup_port5(struct ds
- mutex_unlock(&priv->reg_mutex);
- }
-
--/* On page 205, section "8.6.3 Frame filtering" of the active standard, IEEE Std
-- * 802.1Q™-2022, it is stated that frames with 01:80:C2:00:00:00-0F as MAC DA
-- * must only be propagated to C-VLAN and MAC Bridge components. That means
-- * VLAN-aware and VLAN-unaware bridges. On the switch designs with CPU ports,
-- * these frames are supposed to be processed by the CPU (software). So we make
-- * the switch only forward them to the CPU port. And if received from a CPU
-- * port, forward to a single port. The software is responsible of making the
-- * switch conform to the latter by setting a single port as destination port on
-- * the special tag.
-- *
-- * This switch intellectual property cannot conform to this part of the standard
-- * fully. Whilst the REV_UN frame tag covers the remaining :04-0D and :0F MAC
-- * DAs, it also includes :22-FF which the scope of propagation is not supposed
-- * to be restricted for these MAC DAs.
-+/* In Clause 5 of IEEE Std 802-2014, two sublayers of the data link layer (DLL)
-+ * of the Open Systems Interconnection basic reference model (OSI/RM) are
-+ * described; the medium access control (MAC) and logical link control (LLC)
-+ * sublayers. The MAC sublayer is the one facing the physical layer.
-+ *
-+ * In 8.2 of IEEE Std 802.1Q-2022, the Bridge architecture is described. A
-+ * Bridge component comprises a MAC Relay Entity for interconnecting the Ports
-+ * of the Bridge, at least two Ports, and higher layer entities with at least a
-+ * Spanning Tree Protocol Entity included.
-+ *
-+ * Each Bridge Port also functions as an end station and shall provide the MAC
-+ * Service to an LLC Entity. Each instance of the MAC Service is provided to a
-+ * distinct LLC Entity that supports protocol identification, multiplexing, and
-+ * demultiplexing, for protocol data unit (PDU) transmission and reception by
-+ * one or more higher layer entities.
-+ *
-+ * It is described in 8.13.9 of IEEE Std 802.1Q-2022 that in a Bridge, the LLC
-+ * Entity associated with each Bridge Port is modeled as being directly
-+ * connected to the attached Local Area Network (LAN).
-+ *
-+ * On the switch with CPU port architecture, CPU port functions as Management
-+ * Port, and the Management Port functionality is provided by software which
-+ * functions as an end station. Software is connected to an IEEE 802 LAN that is
-+ * wholly contained within the system that incorporates the Bridge. Software
-+ * provides access to the LLC Entity associated with each Bridge Port by the
-+ * value of the source port field on the special tag on the frame received by
-+ * software.
-+ *
-+ * We call frames that carry control information to determine the active
-+ * topology and current extent of each Virtual Local Area Network (VLAN), i.e.,
-+ * spanning tree or Shortest Path Bridging (SPB) and Multiple VLAN Registration
-+ * Protocol Data Units (MVRPDUs), and frames from other link constrained
-+ * protocols, such as Extensible Authentication Protocol over LAN (EAPOL) and
-+ * Link Layer Discovery Protocol (LLDP), link-local frames. They are not
-+ * forwarded by a Bridge. Permanently configured entries in the filtering
-+ * database (FDB) ensure that such frames are discarded by the Forwarding
-+ * Process. In 8.6.3 of IEEE Std 802.1Q-2022, this is described in detail:
-+ *
-+ * Each of the reserved MAC addresses specified in Table 8-1
-+ * (01-80-C2-00-00-[00,01,02,03,04,05,06,07,08,09,0A,0B,0C,0D,0E,0F]) shall be
-+ * permanently configured in the FDB in C-VLAN components and ERs.
-+ *
-+ * Each of the reserved MAC addresses specified in Table 8-2
-+ * (01-80-C2-00-00-[01,02,03,04,05,06,07,08,09,0A,0E]) shall be permanently
-+ * configured in the FDB in S-VLAN components.
-+ *
-+ * Each of the reserved MAC addresses specified in Table 8-3
-+ * (01-80-C2-00-00-[01,02,04,0E]) shall be permanently configured in the FDB in
-+ * TPMR components.
-+ *
-+ * The FDB entries for reserved MAC addresses shall specify filtering for all
-+ * Bridge Ports and all VIDs. Management shall not provide the capability to
-+ * modify or remove entries for reserved MAC addresses.
-+ *
-+ * The addresses in Table 8-1, Table 8-2, and Table 8-3 determine the scope of
-+ * propagation of PDUs within a Bridged Network, as follows:
-+ *
-+ * The Nearest Bridge group address (01-80-C2-00-00-0E) is an address that no
-+ * conformant Two-Port MAC Relay (TPMR) component, Service VLAN (S-VLAN)
-+ * component, Customer VLAN (C-VLAN) component, or MAC Bridge can forward.
-+ * PDUs transmitted using this destination address, or any other addresses
-+ * that appear in Table 8-1, Table 8-2, and Table 8-3
-+ * (01-80-C2-00-00-[00,01,02,03,04,05,06,07,08,09,0A,0B,0C,0D,0E,0F]), can
-+ * therefore travel no further than those stations that can be reached via a
-+ * single individual LAN from the originating station.
-+ *
-+ * The Nearest non-TPMR Bridge group address (01-80-C2-00-00-03), is an
-+ * address that no conformant S-VLAN component, C-VLAN component, or MAC
-+ * Bridge can forward; however, this address is relayed by a TPMR component.
-+ * PDUs using this destination address, or any of the other addresses that
-+ * appear in both Table 8-1 and Table 8-2 but not in Table 8-3
-+ * (01-80-C2-00-00-[00,03,05,06,07,08,09,0A,0B,0C,0D,0F]), will be relayed by
-+ * any TPMRs but will propagate no further than the nearest S-VLAN component,
-+ * C-VLAN component, or MAC Bridge.
-+ *
-+ * The Nearest Customer Bridge group address (01-80-C2-00-00-00) is an address
-+ * that no conformant C-VLAN component, MAC Bridge can forward; however, it is
-+ * relayed by TPMR components and S-VLAN components. PDUs using this
-+ * destination address, or any of the other addresses that appear in Table 8-1
-+ * but not in either Table 8-2 or Table 8-3 (01-80-C2-00-00-[00,0B,0C,0D,0F]),
-+ * will be relayed by TPMR components and S-VLAN components but will propagate
-+ * no further than the nearest C-VLAN component or MAC Bridge.
-+ *
-+ * Because the LLC Entity associated with each Bridge Port is provided via CPU
-+ * port, we must not filter these frames but forward them to CPU port.
-+ *
-+ * In a Bridge, the transmission Port is majorly decided by ingress and egress
-+ * rules, FDB, and spanning tree Port State functions of the Forwarding Process.
-+ * For link-local frames, only CPU port should be designated as destination port
-+ * in the FDB, and the other functions of the Forwarding Process must not
-+ * interfere with the decision of the transmission Port. We call this process
-+ * trapping frames to CPU port.
-+ *
-+ * Therefore, on the switch with CPU port architecture, link-local frames must
-+ * be trapped to CPU port, and certain link-local frames received by a Port of a
-+ * Bridge comprising a TPMR component or an S-VLAN component must be excluded
-+ * from it.
-+ *
-+ * A Bridge of the switch with CPU port architecture cannot comprise a Two-Port
-+ * MAC Relay (TPMR) component as a TPMR component supports only a subset of the
-+ * functionality of a MAC Bridge. A Bridge comprising two Ports (Management Port
-+ * doesn't count) of this architecture will either function as a standard MAC
-+ * Bridge or a standard VLAN Bridge.
-+ *
-+ * Therefore, a Bridge of this architecture can only comprise S-VLAN components,
-+ * C-VLAN components, or MAC Bridge components. Since there's no TPMR component,
-+ * we don't need to relay PDUs using the destination addresses specified on the
-+ * Nearest non-TPMR section, and the proportion of the Nearest Customer Bridge
-+ * section where they must be relayed by TPMR components.
-+ *
-+ * One option to trap link-local frames to CPU port is to add static FDB entries
-+ * with CPU port designated as destination port. However, because that
-+ * Independent VLAN Learning (IVL) is being used on every VID, each entry only
-+ * applies to a single VLAN Identifier (VID). For a Bridge comprising a MAC
-+ * Bridge component or a C-VLAN component, there would have to be 16 times 4096
-+ * entries. This switch intellectual property can only hold a maximum of 2048
-+ * entries. Using this option, there also isn't a mechanism to prevent
-+ * link-local frames from being discarded when the spanning tree Port State of
-+ * the reception Port is discarding.
-+ *
-+ * The remaining option is to utilise the BPC, RGAC1, RGAC2, RGAC3, and RGAC4
-+ * registers. Whilst this applies to every VID, it doesn't contain all of the
-+ * reserved MAC addresses without affecting the remaining Standard Group MAC
-+ * Addresses. The REV_UN frame tag utilised using the RGAC4 register covers the
-+ * remaining 01-80-C2-00-00-[04,05,06,07,08,09,0A,0B,0C,0D,0F] destination
-+ * addresses. It also includes the 01-80-C2-00-00-22 to 01-80-C2-00-00-FF
-+ * destination addresses which may be relayed by MAC Bridges or VLAN Bridges.
-+ * The latter option provides better but not complete conformance.
-+ *
-+ * This switch intellectual property also does not provide a mechanism to trap
-+ * link-local frames with specific destination addresses to CPU port by Bridge,
-+ * to conform to the filtering rules for the distinct Bridge components.
-+ *
-+ * Therefore, regardless of the type of the Bridge component, link-local frames
-+ * with these destination addresses will be trapped to CPU port:
-+ *
-+ * 01-80-C2-00-00-[00,01,02,03,0E]
-+ *
-+ * In a Bridge comprising a MAC Bridge component or a C-VLAN component:
-+ *
-+ * Link-local frames with these destination addresses won't be trapped to CPU
-+ * port which won't conform to IEEE Std 802.1Q-2022:
-+ *
-+ * 01-80-C2-00-00-[04,05,06,07,08,09,0A,0B,0C,0D,0F]
-+ *
-+ * In a Bridge comprising an S-VLAN component:
-+ *
-+ * Link-local frames with these destination addresses will be trapped to CPU
-+ * port which won't conform to IEEE Std 802.1Q-2022:
-+ *
-+ * 01-80-C2-00-00-00
-+ *
-+ * Link-local frames with these destination addresses won't be trapped to CPU
-+ * port which won't conform to IEEE Std 802.1Q-2022:
-+ *
-+ * 01-80-C2-00-00-[04,05,06,07,08,09,0A]
-+ *
-+ * To trap link-local frames to CPU port as conformant as this switch
-+ * intellectual property can allow, link-local frames are made to be regarded as
-+ * Bridge Protocol Data Units (BPDUs). This is because this switch intellectual
-+ * property only lets the frames regarded as BPDUs bypass the spanning tree Port
-+ * State function of the Forwarding Process.
-+ *
-+ * The only remaining interference is the ingress rules. When the reception Port
-+ * has no PVID assigned on software, VLAN-untagged frames won't be allowed in.
-+ * There doesn't seem to be a mechanism on the switch intellectual property to
-+ * have link-local frames bypass this function of the Forwarding Process.
- */
- static void
- mt753x_trap_frames(struct mt7530_priv *priv)
-@@ -971,35 +1124,43 @@ mt753x_trap_frames(struct mt7530_priv *p
- /* Trap 802.1X PAE frames and BPDUs to the CPU port(s) and egress them
- * VLAN-untagged.
- */
-- mt7530_rmw(priv, MT753X_BPC, MT753X_PAE_EG_TAG_MASK |
-- MT753X_PAE_PORT_FW_MASK | MT753X_BPDU_EG_TAG_MASK |
-- MT753X_BPDU_PORT_FW_MASK,
-- MT753X_PAE_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
-- MT753X_PAE_PORT_FW(MT753X_BPDU_CPU_ONLY) |
-- MT753X_BPDU_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
-- MT753X_BPDU_CPU_ONLY);
-+ mt7530_rmw(priv, MT753X_BPC,
-+ MT753X_PAE_BPDU_FR | MT753X_PAE_EG_TAG_MASK |
-+ MT753X_PAE_PORT_FW_MASK | MT753X_BPDU_EG_TAG_MASK |
-+ MT753X_BPDU_PORT_FW_MASK,
-+ MT753X_PAE_BPDU_FR |
-+ MT753X_PAE_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
-+ MT753X_PAE_PORT_FW(MT753X_BPDU_CPU_ONLY) |
-+ MT753X_BPDU_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
-+ MT753X_BPDU_CPU_ONLY);
-
- /* Trap frames with :01 and :02 MAC DAs to the CPU port(s) and egress
- * them VLAN-untagged.
- */
-- mt7530_rmw(priv, MT753X_RGAC1, MT753X_R02_EG_TAG_MASK |
-- MT753X_R02_PORT_FW_MASK | MT753X_R01_EG_TAG_MASK |
-- MT753X_R01_PORT_FW_MASK,
-- MT753X_R02_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
-- MT753X_R02_PORT_FW(MT753X_BPDU_CPU_ONLY) |
-- MT753X_R01_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
-- MT753X_BPDU_CPU_ONLY);
-+ mt7530_rmw(priv, MT753X_RGAC1,
-+ MT753X_R02_BPDU_FR | MT753X_R02_EG_TAG_MASK |
-+ MT753X_R02_PORT_FW_MASK | MT753X_R01_BPDU_FR |
-+ MT753X_R01_EG_TAG_MASK | MT753X_R01_PORT_FW_MASK,
-+ MT753X_R02_BPDU_FR |
-+ MT753X_R02_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
-+ MT753X_R02_PORT_FW(MT753X_BPDU_CPU_ONLY) |
-+ MT753X_R01_BPDU_FR |
-+ MT753X_R01_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
-+ MT753X_BPDU_CPU_ONLY);
-
- /* Trap frames with :03 and :0E MAC DAs to the CPU port(s) and egress
- * them VLAN-untagged.
- */
-- mt7530_rmw(priv, MT753X_RGAC2, MT753X_R0E_EG_TAG_MASK |
-- MT753X_R0E_PORT_FW_MASK | MT753X_R03_EG_TAG_MASK |
-- MT753X_R03_PORT_FW_MASK,
-- MT753X_R0E_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
-- MT753X_R0E_PORT_FW(MT753X_BPDU_CPU_ONLY) |
-- MT753X_R03_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
-- MT753X_BPDU_CPU_ONLY);
-+ mt7530_rmw(priv, MT753X_RGAC2,
-+ MT753X_R0E_BPDU_FR | MT753X_R0E_EG_TAG_MASK |
-+ MT753X_R0E_PORT_FW_MASK | MT753X_R03_BPDU_FR |
-+ MT753X_R03_EG_TAG_MASK | MT753X_R03_PORT_FW_MASK,
-+ MT753X_R0E_BPDU_FR |
-+ MT753X_R0E_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
-+ MT753X_R0E_PORT_FW(MT753X_BPDU_CPU_ONLY) |
-+ MT753X_R03_BPDU_FR |
-+ MT753X_R03_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
-+ MT753X_BPDU_CPU_ONLY);
- }
-
- static void
---- a/drivers/net/dsa/mt7530.h
-+++ b/drivers/net/dsa/mt7530.h
-@@ -65,6 +65,7 @@ enum mt753x_id {
-
- /* Registers for BPDU and PAE frame control*/
- #define MT753X_BPC 0x24
-+#define MT753X_PAE_BPDU_FR BIT(25)
- #define MT753X_PAE_EG_TAG_MASK GENMASK(24, 22)
- #define MT753X_PAE_EG_TAG(x) FIELD_PREP(MT753X_PAE_EG_TAG_MASK, x)
- #define MT753X_PAE_PORT_FW_MASK GENMASK(18, 16)
-@@ -75,20 +76,24 @@ enum mt753x_id {
-
- /* Register for :01 and :02 MAC DA frame control */
- #define MT753X_RGAC1 0x28
-+#define MT753X_R02_BPDU_FR BIT(25)
- #define MT753X_R02_EG_TAG_MASK GENMASK(24, 22)
- #define MT753X_R02_EG_TAG(x) FIELD_PREP(MT753X_R02_EG_TAG_MASK, x)
- #define MT753X_R02_PORT_FW_MASK GENMASK(18, 16)
- #define MT753X_R02_PORT_FW(x) FIELD_PREP(MT753X_R02_PORT_FW_MASK, x)
-+#define MT753X_R01_BPDU_FR BIT(9)
- #define MT753X_R01_EG_TAG_MASK GENMASK(8, 6)
- #define MT753X_R01_EG_TAG(x) FIELD_PREP(MT753X_R01_EG_TAG_MASK, x)
- #define MT753X_R01_PORT_FW_MASK GENMASK(2, 0)
-
- /* Register for :03 and :0E MAC DA frame control */
- #define MT753X_RGAC2 0x2c
-+#define MT753X_R0E_BPDU_FR BIT(25)
- #define MT753X_R0E_EG_TAG_MASK GENMASK(24, 22)
- #define MT753X_R0E_EG_TAG(x) FIELD_PREP(MT753X_R0E_EG_TAG_MASK, x)
- #define MT753X_R0E_PORT_FW_MASK GENMASK(18, 16)
- #define MT753X_R0E_PORT_FW(x) FIELD_PREP(MT753X_R0E_PORT_FW_MASK, x)
-+#define MT753X_R03_BPDU_FR BIT(9)
- #define MT753X_R03_EG_TAG_MASK GENMASK(8, 6)
- #define MT753X_R03_EG_TAG(x) FIELD_PREP(MT753X_R03_EG_TAG_MASK, x)
- #define MT753X_R03_PORT_FW_MASK GENMASK(2, 0)
More information about the lede-commits
mailing list