[openwrt/openwrt] ipq807x: add Spectrum SAX1V1K
LEDE Commits
lede-commits at lists.infradead.org
Tue Apr 23 12:59:30 PDT 2024
robimarko pushed a commit to openwrt/openwrt.git, branch main:
https://git.openwrt.org/3569b37b15c721513a0a5d4bd6d857be2523ec38
commit 3569b37b15c721513a0a5d4bd6d857be2523ec38
Author: Connor Yoon <j_connor at taliaent.com>
AuthorDate: Tue Mar 19 14:10:51 2024 +0100
ipq807x: add Spectrum SAX1V1K
Spectrum SAX1V1K is a AX WIFI router with 3 1G and 1 2.5G ports.
The router is provided to Spectrum customers.
It is OEM of Askey RT5010W
https://forum.openwrt.org/t/spectrum-sax1v1k-askey-rt5010w-openwrt-support/149923
It continues the original work by @MeisterLone to get this device supported.
Specifications:
```
• CPU: Qualcomm IPQ8072A Quad core Cortex-A53 2.2GHz
• RAM: 2048MB of DDR3
• Storage: 1024MB eMMC
• Ethernet: 3x 1G RJ45 ports (QCA8075) + 1 2.5G Port (QCA8081)
• WLAN:
• 2.4GHz: Qualcomm QCN5024 4x4 802.11b/g/n/ax 1174 Mbps PHY rate
• 5GHz: Qualcomm QCN5054 4x4 802.11a/b/g/n/ac/ax 2402 PHY rate
• LED: 1 gpio-controlled dual color led (blue/red)
• Buttons: 1x reset
• Power: 12V DC jack
```
Notes:
```
• This commit adds only single partition support, that means
sysupgrade is upgrading the current rootfs partition.
• Installation can be done by serial connection only.
• A poulated serial header is onboard
https://forum.openwrt.org/t/spectrum-sax1v1k-askey-rt5010w-openwrt-support/149923/6
• RX/TX is working, u-boot bootwait is active, secure boot is enabled.
```
Installation Instructions:
**Most part of the installation is performed from an initramfs image.**
Boot initramfs : Using serial connection
1. Boot up the device and wait till it displays "VERIFY_IB: Success. verify IB ok"
2. Once that message appears,
login with username 'root'
password serial number of your router in uppercase.
3. Use vi to paste the 'open.sh' script from @MeisterLone github on your device
https://github.com/MeisterLone/Askey-RT5010W-D187-REV6/blob/master/Patch/open.sh
4. chmod 755 open.sh
5. ./open.sh
6. Set your ip to 192.168.0.1
7. Run a TFTP server and host the initramfs image on the TFTP server and name it "recovery.img"
8. Reboot device. On boot it will try TFTP.
Install OpenWrt from initramfs image:
1. Use SCP (or other way) to transfer OpenWrt factory image
2. Connect to device using SSH (on a LAN port)
3. Flash firmware: sysupgrade
# sysupgrade -n -v /tmp/openwrt_sysupgrade.bin
4. Set U-boot env variable: bootcmd
# fw_setenv bootcmd "run fix_uboot; run setup_and_boot"
5. Reboot the device
# reboot
6. Once device is booted, residue of previous firmware will prevent openwrt to work properly.
Factory Reset is MUST required
# Once serial console is displaying to login, hold reset button for 10 sec
7. Now everything should be operational.
Note: this PR adds only single partition support, that means sysupgrade is
upgrading the current rootfs partition
Signed-off-by: Connor Yoon <j_connor at taliaent.com>
---
.../boot/uboot-envtools/files/qualcommax_ipq807x | 5 +
package/firmware/ipq-wifi/Makefile | 2 +
.../arch/arm64/boot/dts/qcom/ipq8072-sax1v1k.dts | 219 +++++++++++++++++++++
target/linux/qualcommax/image/ipq807x.mk | 12 ++
.../ipq807x/base-files/etc/board.d/02_network | 1 +
.../etc/hotplug.d/firmware/11-ath11k-caldata | 3 +-
.../ipq807x/base-files/lib/upgrade/platform.sh | 3 +-
7 files changed, 243 insertions(+), 2 deletions(-)
diff --git a/package/boot/uboot-envtools/files/qualcommax_ipq807x b/package/boot/uboot-envtools/files/qualcommax_ipq807x
index 86e7062cfc..312fdf8d87 100644
--- a/package/boot/uboot-envtools/files/qualcommax_ipq807x
+++ b/package/boot/uboot-envtools/files/qualcommax_ipq807x
@@ -56,6 +56,11 @@ qnap,301w)
[ -n "$idx" ] && \
ubootenv_add_uci_config "/dev/mtd$idx" "0x0" "0x20000" "0x20000" "1"
;;
+spectrum,sax1v1k)
+ mmcpart="$(find_mmc_part 0:APPSBLENV)"
+ [ -n "$mmcpart" ] && \
+ ubootenv_add_uci_config "$mmcpart" "0x0" "0x40000" "0x40000" "1"
+ ;;
esac
config_load ubootenv
diff --git a/package/firmware/ipq-wifi/Makefile b/package/firmware/ipq-wifi/Makefile
index 41c772c967..ced4ece692 100644
--- a/package/firmware/ipq-wifi/Makefile
+++ b/package/firmware/ipq-wifi/Makefile
@@ -46,6 +46,7 @@ ALLWIFIBOARDS:= \
prpl_haze \
qnap_301w \
redmi_ax6 \
+ spectrum_sax1v1k \
wallys_dr40x9 \
xiaomi_ax3600 \
xiaomi_ax9000 \
@@ -165,6 +166,7 @@ $(eval $(call generate-ipq-wifi-package,netgear_wax630,Netgear WAX630))
$(eval $(call generate-ipq-wifi-package,qnap_301w,QNAP 301w))
$(eval $(call generate-ipq-wifi-package,prpl_haze,prpl Haze))
$(eval $(call generate-ipq-wifi-package,redmi_ax6,Redmi AX6))
+$(eval $(call generate-ipq-wifi-package,spectrum_sax1v1k,Spectrum SAX1V1K))
$(eval $(call generate-ipq-wifi-package,wallys_dr40x9,Wallys DR40X9))
$(eval $(call generate-ipq-wifi-package,xiaomi_ax3600,Xiaomi AX3600))
$(eval $(call generate-ipq-wifi-package,xiaomi_ax9000,Xiaomi AX9000))
diff --git a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-sax1v1k.dts b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-sax1v1k.dts
new file mode 100644
index 0000000000..01ac1c5fd6
--- /dev/null
+++ b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-sax1v1k.dts
@@ -0,0 +1,219 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+/dts-v1/;
+
+#include "ipq8074.dtsi"
+#include "ipq8074-hk-cpu.dtsi"
+#include "ipq8074-ess.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ model = "Spectrum SAX1V1K";
+ compatible = "spectrum,sax1v1k", "qcom,ipq8074";
+
+ aliases {
+ led-boot = &led_system_red;
+ led-failsafe = &led_system_red;
+ led-running = &led_system_blue;
+ led-upgrade = &led_system_red;
+ serial0 = &blsp1_uart5;
+ /* Aliases as required by u-boot to patch MAC addresses */
+ ethernet0 = &dp6_syn;
+ ethernet1 = &dp4;
+ ethernet2 = &dp3;
+ ethernet3 = &dp2;
+ label-mac-device = &dp6_syn;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ gpios = <&tlmm 34 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_system_blue: system-blue {
+ gpios = <&tlmm 26 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_STATUS;
+ };
+
+ led_system_red: system-red {
+ gpios = <&tlmm 25 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_STATUS;
+ };
+ };
+};
+
+&tlmm {
+ mdio_pins: mdio-pins {
+ mdc {
+ pins = "gpio68";
+ function = "mdc";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+
+ mdio {
+ pins = "gpio69";
+ function = "mdio";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+ };
+};
+
+&blsp1_uart5 {
+ status = "okay";
+};
+
+&prng {
+ status = "okay";
+};
+
+&cryptobam {
+ status = "okay";
+};
+
+&crypto {
+ status = "okay";
+};
+
+&qpic_bam {
+ status = "okay";
+};
+
+&mdio {
+ pinctrl-0 = <&mdio_pins>;
+ pinctrl-names = "default";
+ reset-gpios = <&tlmm 37 GPIO_ACTIVE_LOW>;
+ status = "okay";
+
+ ethernet-phy-package at 0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "qcom,qca8075-package";
+ reg = <0>;
+
+ qcom,package-mode = "qsgmii";
+
+ qca8075_1: ethernet-phy at 1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ };
+
+ qca8075_2: ethernet-phy at 2 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <2>;
+ };
+
+ qca8075_3: ethernet-phy at 3 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <3>;
+ };
+ };
+
+ qca8081: ethernet-phy at 28 {
+ compatible = "ethernet-phy-id004d.d101";
+ reg = <28>;
+ reset-gpios = <&tlmm 44 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&sdhc_1 {
+ /* Following same rule as QNAP 301W
+ * the emmc has a problem with the hs400 > hs200 speed switch.
+ * Therefore remove the mmc-hs400-1_8v property
+ */
+ /delete-property/ mmc-hs400-1_8v;
+ mmc-hs200-1_8v;
+ mmc-ddr-1_8v;
+ vqmmc-supply = <&l11>;
+ status = "okay";
+};
+
+&switch {
+ switch_lan_bmp = <(ESS_PORT2 | ESS_PORT3 | ESS_PORT4)>; /* lan port bitmap */
+ switch_wan_bmp = <ESS_PORT6>; /* wan port bitmap */
+ switch_mac_mode = <MAC_MODE_QSGMII>; /* mac mode for uniphy instance0*/
+ switch_mac_mode2 = <MAC_MODE_SGMII_PLUS>; /* mac mode for uniphy instance2*/
+ status = "okay";
+
+ qcom,port_phyinfo {
+ port at 2 {
+ port_id = <2>;
+ phy_address = <1>;
+ };
+
+ port at 3 {
+ port_id = <3>;
+ phy_address = <2>;
+ };
+
+ port at 4 {
+ port_id = <4>;
+ phy_address = <3>;
+ };
+
+ port at 6 {
+ port_id = <6>;
+ phy_address = <28>;
+ port_mac_sel = "QGMAC_PORT";
+ };
+ };
+};
+
+&edma {
+ status = "okay";
+};
+
+&dp2 {
+ phy-mode = "qsgmii";
+ phy-handle = <&qca8075_1>;
+ label = "lan3";
+ status = "okay";
+};
+
+&dp3 {
+ phy-mode = "qsgmii";
+ phy-handle = <&qca8075_2>;
+ label = "lan2";
+ status = "okay";
+};
+
+&dp4 {
+ phy-mode = "qsgmii";
+ phy-handle = <&qca8075_3>;
+ label = "lan1";
+ status = "okay";
+};
+
+&dp6_syn {
+ phy-handle = <&qca8081>;
+ label = "wan";
+ status = "okay";
+};
+
+&wifi {
+ qcom,ath11k-calibration-variant = "Spectrum-SAX1V1K";
+ status = "okay";
+};
diff --git a/target/linux/qualcommax/image/ipq807x.mk b/target/linux/qualcommax/image/ipq807x.mk
index 027278b63c..e32250d458 100644
--- a/target/linux/qualcommax/image/ipq807x.mk
+++ b/target/linux/qualcommax/image/ipq807x.mk
@@ -247,6 +247,18 @@ define Device/redmi_ax6
endef
TARGET_DEVICES += redmi_ax6
+define Device/spectrum_sax1v1k
+ $(call Device/FitImage)
+ $(call Device/EmmcImage)
+ DEVICE_VENDOR := Spectrum
+ DEVICE_MODEL := SAX1V1K
+ DEVICE_DTS_CONFIG := config at rt5010w-d187-rev6
+ SOC := ipq8072
+ IMAGES := sysupgrade.bin
+ DEVICE_PACKAGES := ipq-wifi-spectrum_sax1v1k
+endef
+TARGET_DEVICES += spectrum_sax1v1k
+
define Device/xiaomi_ax3600
$(call Device/FitImage)
$(call Device/UbiFit)
diff --git a/target/linux/qualcommax/ipq807x/base-files/etc/board.d/02_network b/target/linux/qualcommax/ipq807x/base-files/etc/board.d/02_network
index 77c84d40fa..a6ec834785 100644
--- a/target/linux/qualcommax/ipq807x/base-files/etc/board.d/02_network
+++ b/target/linux/qualcommax/ipq807x/base-files/etc/board.d/02_network
@@ -27,6 +27,7 @@ ipq807x_setup_interfaces()
linksys,mx4200v2|\
prpl,haze|\
redmi,ax6|\
+ spectrum,sax1v1k|\
xiaomi,ax3600)
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" "wan"
;;
diff --git a/target/linux/qualcommax/ipq807x/base-files/etc/hotplug.d/firmware/11-ath11k-caldata b/target/linux/qualcommax/ipq807x/base-files/etc/hotplug.d/firmware/11-ath11k-caldata
index f533bac48e..d0689d0db6 100644
--- a/target/linux/qualcommax/ipq807x/base-files/etc/hotplug.d/firmware/11-ath11k-caldata
+++ b/target/linux/qualcommax/ipq807x/base-files/etc/hotplug.d/firmware/11-ath11k-caldata
@@ -33,7 +33,8 @@ case "$FIRMWARE" in
zyxel,nbg7815)
caldata_extract "0:art" 0x1000 0x20000
;;
- prpl,haze)
+ prpl,haze|\
+ spectrum,sax1v1k)
caldata_extract_mmc "0:ART" 0x1000 0x20000
;;
esac
diff --git a/target/linux/qualcommax/ipq807x/base-files/lib/upgrade/platform.sh b/target/linux/qualcommax/ipq807x/base-files/lib/upgrade/platform.sh
index 768bf649ce..b9668d0af4 100644
--- a/target/linux/qualcommax/ipq807x/base-files/lib/upgrade/platform.sh
+++ b/target/linux/qualcommax/ipq807x/base-files/lib/upgrade/platform.sh
@@ -92,7 +92,8 @@ platform_do_upgrade() {
nand_do_upgrade "$1"
;;
prpl,haze|\
- qnap,301w)
+ qnap,301w|\
+ spectrum,sax1v1k)
kernelname="0:HLOS"
rootfsname="rootfs"
mmc_do_upgrade "$1"
More information about the lede-commits
mailing list