[openwrt/openwrt] ramips: Add support for D-Link DIR-3040 A1
LEDE Commits
lede-commits at lists.infradead.org
Sun Apr 14 11:37:51 PDT 2024
hauke pushed a commit to openwrt/openwrt.git, branch main:
https://git.openwrt.org/cab2e1de0d94ab35b5d032194fc5b4ab2e0d609a
commit cab2e1de0d94ab35b5d032194fc5b4ab2e0d609a
Author: Vince McKinsey <vincemckinsey at gmail.com>
AuthorDate: Sun Mar 31 14:29:05 2024 -0400
ramips: Add support for D-Link DIR-3040 A1
This adds support for the A1 hardware revision of the DIR-3040.
It is an exact copy of the DIR-3060 save for some cosmetic changes to the housing.
Even going so far as having the same FCC ID.
Hardware specification:
SoC: MediaTek MT7621AT
Flash: Winbond W29N01HVSINA 128MB
RAM: Micron MT41K128M16JT-125 256MB
Ethernet: 5x 10/100/1000 Mbps
WiFi1: MT7615DN 2.4GHz N 2x2:2
WiFi2: MT7615DN 5GHz AC 2x2:2
WiFi3: MT7615N 5GHz AC 4x4:4
Button: WPS, Reset
Flash instructions:
OpenWrt can be installed via D-Link Recovery GUI:
NOTE: Seems to only work in Firefox on Windows.
Tried with Chrome on Windows, Firefox in Linux, and Chromium in Linux.
None of these other browsers worked.
1. Push and hold reset button (on the bottom of the device) until power led
starts flashing (about 10 secs or so) while plugging in the power cable.
2. Give it ~30 seconds, to boot the recovery mode GUI
3. Connect your client computer to LAN1 of the device
4. Set your client IP address manually to 192.168.0.2 / 255.255.255.0.
5. Call the recovery page for the device at http://192.168.0.1/
6. Use the provided emergency web GUI to upload and flash a new firmware to the device
Thanks to @Lucky1openwrt and @iivailo for creating the DIR-3060 DTS file and related changes,
so it was possible for me to adapt them to the DIR-3040, build images,
test and fix minor issues.
MAC Addresses:
| use | address | example |
| --- | --- | --- |
| LAN | label | f4:*:61 |
| WAN | label + 4 | f4:*:65 |
| WI1/2g | label + 2 | f4:*:63 |
| WI1/5g | label + 1 | f4:*:62 |
| WI2/5g | label + 3 | f4:*:64 |
The label MAC address was found in Factory, 0xe000
Checklist:
✓ nand
✓ ethernet
✓ button
✓ wifi2g
✓ wifi5g
✓ wifi5g
✓ mac
✓ led
Signed-off-by: Vince McKinsey <vincemckinsey at gmail.com>
---
.../linux/ramips/dts/mt7621_dlink_dir-3040-a1.dts | 67 ++++++++++++++++++++++
.../linux/ramips/dts/mt7621_dlink_dir-xx60-a1.dtsi | 2 +-
target/linux/ramips/image/mt7621.mk | 7 +++
.../ramips/mt7621/base-files/etc/board.d/01_leds | 1 +
.../etc/hotplug.d/ieee80211/10_fix_wifi_mac | 5 ++
.../mt7621/base-files/lib/upgrade/platform.sh | 1 +
6 files changed, 82 insertions(+), 1 deletion(-)
diff --git a/target/linux/ramips/dts/mt7621_dlink_dir-3040-a1.dts b/target/linux/ramips/dts/mt7621_dlink_dir-3040-a1.dts
new file mode 100644
index 0000000000..4bb35a948d
--- /dev/null
+++ b/target/linux/ramips/dts/mt7621_dlink_dir-3040-a1.dts
@@ -0,0 +1,67 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7621_dlink_dir-xx60-a1.dtsi"
+
+/ {
+ compatible = "dlink,dir-3040-a1", "mediatek,mt7621-soc";
+ model = "D-Link DIR-3040 A1";
+};
+
+&wps {
+ gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+};
+
+&leds {
+ usb2_white {
+ function = LED_FUNCTION_USB;
+ color = <LED_COLOR_ID_WHITE>;
+ function-enumerator = <0>;
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&ehci_port2>;
+ linux,default-trigger = "usbport";
+ };
+
+ usb3_white {
+ function = LED_FUNCTION_USB;
+ color = <LED_COLOR_ID_WHITE>;
+ function-enumerator = <1>;
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&xhci_ehci_port1>;
+ linux,default-trigger = "usbport";
+ };
+
+ wlan2g {
+ function = LED_FUNCTION_WLAN_2GHZ;
+ color = <LED_COLOR_ID_WHITE>;
+ gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy0radio";
+ };
+
+ wlan5glb {
+ function = LED_FUNCTION_WLAN_5GHZ;
+ color = <LED_COLOR_ID_WHITE>;
+ function-enumerator = <0>;
+ gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy1radio";
+ };
+
+ wlan5ghb {
+ function = LED_FUNCTION_WLAN_5GHZ;
+ color = <LED_COLOR_ID_WHITE>;
+ function-enumerator = <1>;
+ gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy2radio";
+ };
+};
+
+&wifi0 {
+ nvmem-cells = <&eeprom_factory_0>, <&macaddr_factory_e000 1>;
+ nvmem-cell-names = "eeprom", "mac-address";
+ ieee80211-freq-limit;
+ /delete-property/ ieee80211-freq-limit;
+};
+
+&wifi1 {
+ nvmem-cells = <&eeprom_factory_8000>, <&macaddr_factory_e000 3>;
+ nvmem-cell-names = "eeprom", "mac-address";
+};
diff --git a/target/linux/ramips/dts/mt7621_dlink_dir-xx60-a1.dtsi b/target/linux/ramips/dts/mt7621_dlink_dir-xx60-a1.dtsi
index 7b7228b8c3..57652fb278 100644
--- a/target/linux/ramips/dts/mt7621_dlink_dir-xx60-a1.dtsi
+++ b/target/linux/ramips/dts/mt7621_dlink_dir-xx60-a1.dtsi
@@ -24,7 +24,7 @@
linux,code = <KEY_RESTART>;
};
- wps {
+ wps: wps {
label = "wps";
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk
index fb8cfce589..10e7857614 100644
--- a/target/linux/ramips/image/mt7621.mk
+++ b/target/linux/ramips/image/mt7621.mk
@@ -783,6 +783,13 @@ define Device/dlink_dir-2660-a1
endef
TARGET_DEVICES += dlink_dir-2660-a1
+define Device/dlink_dir-3040-a1
+ $(Device/dlink_dir-xx60-a1)
+ DEVICE_MODEL := DIR-3040
+ DEVICE_VARIANT := A1
+endef
+TARGET_DEVICES += dlink_dir-3040-a1
+
define Device/dlink_dir-3060-a1
$(Device/dlink_dir-xx60-a1)
DEVICE_MODEL := DIR-3060
diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
index 3eba20bb79..6848bebd00 100644
--- a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
@@ -96,6 +96,7 @@ dlink,dir-2640-a1|\
dlink,dir-2660-a1)
ucidef_set_led_netdev "wan" "wan" "white:net" "wan"
;;
+dlink,dir-3040-a1|\
dlink,dir-3060-a1)
ucidef_set_led_netdev "net_white" "WAN Link" "white:net" "wan" "link"
ucidef_set_led_netdev "net_orange" "WAN Activity" "orange:net" "wan" "tx rx"
diff --git a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
index 962e1f7019..0ec46bb0ea 100644
--- a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
+++ b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
@@ -60,6 +60,11 @@ case "$board" in
[ "$PHYNBR" = "1" ] && \
macaddr_add $hw_mac_addr 4 > /sys${DEVPATH}/macaddress
;;
+ dlink,dir-3040-a1)
+ lan_mac_addr="$(mtd_get_mac_binary factory 0xe000)"
+ [ "$PHYNBR" = "0" ] && \
+ macaddr_add $lan_mac_addr 2 > /sys${DEVPATH}/macaddress
+ ;;
dlink,dir-853-a3)
[ "$PHYNBR" = "0" ] && \
macaddr_setbit_la "$(mtd_get_mac_binary factory 0xe000)" \
diff --git a/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh b/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh
index eba02e6599..93fbc470ad 100755
--- a/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh
@@ -73,6 +73,7 @@ platform_do_upgrade() {
dlink,dir-1960-a1|\
dlink,dir-2640-a1|\
dlink,dir-2660-a1|\
+ dlink,dir-3040-a1|\
dlink,dir-3060-a1|\
dlink,dir-853-a3|\
etisalat,s3|\
More information about the lede-commits
mailing list