[openwrt/openwrt] ramips: 6.6: remove old patches
LEDE Commits
lede-commits at lists.infradead.org
Thu Apr 4 22:58:43 PDT 2024
nick pushed a commit to openwrt/openwrt.git, branch main:
https://git.openwrt.org/4b8b7438f78346ccc3fc7393a3d026f63df0cdcd
commit 4b8b7438f78346ccc3fc7393a3d026f63df0cdcd
Author: Mieczyslaw Nalewaj <namiltd at yahoo.com>
AuthorDate: Wed Mar 13 02:02:58 2024 +0100
ramips: 6.6: remove old patches
Remove patches for old kernel.
Signed-off-by: Mieczyslaw Nalewaj <namiltd at yahoo.com>
---
...alink-fix-mt7621_gate_is_enabled-function.patch | 77 --
...s-clock-add-mtmips-SoCs-system-controller.patch | 86 --
...add-clock-and-reset-driver-for-MTMIPS-SoC.patch | 1221 --------------------
...s-ralink-rt288x-remove-clock-related-code.patch | 81 --
...s-ralink-rt305x-remove-clock-related-code.patch | 145 ---
...s-ralink-rt3883-remove-clock-related-code.patch | 85 --
...s-ralink-mt7620-remove-clock-related-code.patch | 327 ------
...-07-mips-ralink-remove-reset-related-code.patch | 121 --
...-ralink-get-cpu-rate-from-new-driver-code.patch | 102 --
...NERS-add-Mediatek-MTMIPS-Clock-maintainer.patch | 28 -
...-introduce-commonly-used-remap-node-funct.patch | 191 ---
...mtmips-Fix-uninitialized-use-of-ret-in-mt.patch | 56 -
...-match-all-supported-system-controller-co.patch | 40 -
...7621-wdt-avoid-static-global-declarations.patch | 213 ----
...7621-wdt-avoid-ralink-architecture-depend.patch | 104 --
...7620-do-not-print-NFTS-register-value-as-.patch | 32 -
...7620-use-dev_info-to-log-PCIe-device-dete.patch | 39 -
...1-Use-dev_info-to-log-PCIe-card-detection.patch | 31 -
18 files changed, 2979 deletions(-)
diff --git a/target/linux/ramips/patches-6.6/003-v6.3-clk-ralink-fix-mt7621_gate_is_enabled-function.patch b/target/linux/ramips/patches-6.6/003-v6.3-clk-ralink-fix-mt7621_gate_is_enabled-function.patch
deleted file mode 100644
index 4574f7977f..0000000000
--- a/target/linux/ramips/patches-6.6/003-v6.3-clk-ralink-fix-mt7621_gate_is_enabled-function.patch
+++ /dev/null
@@ -1,77 +0,0 @@
-From 35dcae535afc153fa83f2fe51c0812536c192c58 Mon Sep 17 00:00:00 2001
-From: Sergio Paracuellos <sergio.paracuellos at gmail.com>
-Date: Mon, 6 Feb 2023 09:33:05 +0100
-Subject: [PATCH] clk: ralink: fix 'mt7621_gate_is_enabled()' function
-
-Compiling clock driver with CONFIG_UBSAN enabled shows the following trace:
-
-UBSAN: shift-out-of-bounds in drivers/clk/ralink/clk-mt7621.c:121:15
-shift exponent 131072 is too large for 32-bit type 'long unsigned int'
-CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.15.86 #0
-Stack : ...
-
-Call Trace:
-[<80009a58>] show_stack+0x38/0x118
-[<8045ce04>] dump_stack_lvl+0x60/0x80
-[<80458868>] ubsan_epilogue+0x10/0x54
-[<804590e0>] __ubsan_handle_shift_out_of_bounds+0x118/0x190
-[<804c9a10>] mt7621_gate_is_enabled+0x98/0xa0
-[<804bb774>] clk_core_is_enabled+0x34/0x90
-[<80aad73c>] clk_disable_unused_subtree+0x98/0x1e4
-[<80aad6d4>] clk_disable_unused_subtree+0x30/0x1e4
-[<80aad6d4>] clk_disable_unused_subtree+0x30/0x1e4
-[<80aad900>] clk_disable_unused+0x78/0x120
-[<80002030>] do_one_initcall+0x54/0x1f0
-[<80a922a4>] kernel_init_freeable+0x280/0x31c
-[<808047c4>] kernel_init+0x20/0x118
-[<80003e58>] ret_from_kernel_thread+0x14/0x1c
-
-Shifting a value (131032) larger than the type (32 bit unsigned integer)
-is undefined behaviour in C.
-
-The problem is in 'mt7621_gate_is_enabled()' function which is using the
-'BIT()' kernel macro with the bit index for the clock gate to check if the
-bit is set. When the clock gates structure is created driver is already
-setting 'bit_idx' using 'BIT()' macro, so we are wrongly applying an extra
-'BIT()' mask here. Removing it solve the problem and makes this function
-correct. However when clock gating is correctly working, the kernel starts
-disabling those clocks that are not requested. Some drivers for this SoC
-are older than this clock driver itself. So to avoid the kernel to disable
-clocks that have been enabled until now, we must apply 'CLK_IS_CRITICAL'
-flag on gates initialization code.
-
-Fixes: 48df7a26f470 ("clk: ralink: add clock driver for mt7621 SoC")
-Signed-off-by: Sergio Paracuellos <sergio.paracuellos at gmail.com>
-Link: https://lore.kernel.org/r/20230206083305.147582-1-sergio.paracuellos@gmail.com
-Signed-off-by: Stephen Boyd <sboyd at kernel.org>
----
- drivers/clk/ralink/clk-mt7621.c | 10 ++++++++--
- 1 file changed, 8 insertions(+), 2 deletions(-)
-
---- a/drivers/clk/ralink/clk-mt7621.c
-+++ b/drivers/clk/ralink/clk-mt7621.c
-@@ -121,7 +121,7 @@ static int mt7621_gate_is_enabled(struct
- if (regmap_read(sysc, SYSC_REG_CLKCFG1, &val))
- return 0;
-
-- return val & BIT(clk_gate->bit_idx);
-+ return val & clk_gate->bit_idx;
- }
-
- static const struct clk_ops mt7621_gate_ops = {
-@@ -133,8 +133,14 @@ static const struct clk_ops mt7621_gate_
- static int mt7621_gate_ops_init(struct device *dev,
- struct mt7621_gate *sclk)
- {
-+ /*
-+ * There are drivers for this SoC that are older
-+ * than clock driver and are not prepared for the clock.
-+ * We don't want the kernel to disable anything so we
-+ * add CLK_IS_CRITICAL flag here.
-+ */
- struct clk_init_data init = {
-- .flags = CLK_SET_RATE_PARENT,
-+ .flags = CLK_SET_RATE_PARENT | CLK_IS_CRITICAL,
- .num_parents = 1,
- .parent_names = &sclk->parent_name,
- .ops = &mt7621_gate_ops,
diff --git a/target/linux/ramips/patches-6.6/005-v6.5-01-dt-bindings-clock-add-mtmips-SoCs-system-controller.patch b/target/linux/ramips/patches-6.6/005-v6.5-01-dt-bindings-clock-add-mtmips-SoCs-system-controller.patch
deleted file mode 100644
index 94784f7885..0000000000
--- a/target/linux/ramips/patches-6.6/005-v6.5-01-dt-bindings-clock-add-mtmips-SoCs-system-controller.patch
+++ /dev/null
@@ -1,86 +0,0 @@
-From 612616e6381929e7f9e303f8b8ad3655cc101516 Mon Sep 17 00:00:00 2001
-From: Sergio Paracuellos <sergio.paracuellos at gmail.com>
-Date: Mon, 19 Jun 2023 06:09:33 +0200
-Subject: [PATCH 1/9] dt-bindings: clock: add mtmips SoCs system controller
-
-Adds device tree binding documentation for system controller node present
-in Mediatek MIPS and Ralink SOCs. This node is a clock and reset provider
-for the rest of the world. This covers RT2880, RT3050, RT3052, RT3350,
-RT3883, RT5350, MT7620, MT7628 and MT7688 SoCs.
-
-Reviewed-by: Rob Herring <robh at kernel.org>
-Acked-by: Stephen Boyd <sboyd at kernel.org>
-Signed-off-by: Sergio Paracuellos <sergio.paracuellos at gmail.com>
-Signed-off-by: Thomas Bogendoerfer <tsbogend at alpha.franken.de>
----
- .../bindings/clock/mediatek,mtmips-sysc.yaml | 64 ++++++++++++++++++++++
- 1 file changed, 64 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/clock/mediatek,mtmips-sysc.yaml
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/clock/mediatek,mtmips-sysc.yaml
-@@ -0,0 +1,64 @@
-+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-+%YAML 1.2
-+---
-+$id: http://devicetree.org/schemas/clock/mediatek,mtmips-sysc.yaml#
-+$schema: http://devicetree.org/meta-schemas/core.yaml#
-+
-+title: MTMIPS SoCs System Controller
-+
-+maintainers:
-+ - Sergio Paracuellos <sergio.paracuellos at gmail.com>
-+
-+description: |
-+ MediaTek MIPS and Ralink SoCs provides a system controller to allow
-+ to access to system control registers. These registers include clock
-+ and reset related ones so this node is both clock and reset provider
-+ for the rest of the world.
-+
-+ These SoCs have an XTAL from where the cpu clock is
-+ provided as well as derived clocks for the bus and the peripherals.
-+
-+properties:
-+ compatible:
-+ items:
-+ - enum:
-+ - ralink,mt7620-sysc
-+ - ralink,mt7628-sysc
-+ - ralink,mt7688-sysc
-+ - ralink,rt2880-sysc
-+ - ralink,rt3050-sysc
-+ - ralink,rt3052-sysc
-+ - ralink,rt3352-sysc
-+ - ralink,rt3883-sysc
-+ - ralink,rt5350-sysc
-+ - const: syscon
-+
-+ reg:
-+ maxItems: 1
-+
-+ '#clock-cells':
-+ description:
-+ The first cell indicates the clock number.
-+ const: 1
-+
-+ '#reset-cells':
-+ description:
-+ The first cell indicates the reset bit within the register.
-+ const: 1
-+
-+required:
-+ - compatible
-+ - reg
-+ - '#clock-cells'
-+ - '#reset-cells'
-+
-+additionalProperties: false
-+
-+examples:
-+ - |
-+ syscon at 0 {
-+ compatible = "ralink,rt5350-sysc", "syscon";
-+ reg = <0x0 0x100>;
-+ #clock-cells = <1>;
-+ #reset-cells = <1>;
-+ };
diff --git a/target/linux/ramips/patches-6.6/005-v6.5-02-clk-ralink-add-clock-and-reset-driver-for-MTMIPS-SoC.patch b/target/linux/ramips/patches-6.6/005-v6.5-02-clk-ralink-add-clock-and-reset-driver-for-MTMIPS-SoC.patch
deleted file mode 100644
index cef39978e0..0000000000
--- a/target/linux/ramips/patches-6.6/005-v6.5-02-clk-ralink-add-clock-and-reset-driver-for-MTMIPS-SoC.patch
+++ /dev/null
@@ -1,1221 +0,0 @@
-From 6f3b15586eef736831abe6a14f2a6906bc0dc074 Mon Sep 17 00:00:00 2001
-From: Sergio Paracuellos <sergio.paracuellos at gmail.com>
-Date: Mon, 19 Jun 2023 06:09:34 +0200
-Subject: [PATCH 2/9] clk: ralink: add clock and reset driver for MTMIPS SoCs
-
-Until now, clock related code for old ralink SoCs was based in fixed clocks
-using 'clk_register_fixed_rate' and 'clkdev_create' directly doing in code
-and not using device tree at all for their definition. Including this driver
-is an effort to be able to define proper clocks using device tree and also
-cleaning all the clock and reset related code from 'arch/mips/ralink' dir.
-This clock and reset driver covers all the ralink SoCs but MT7621 which is
-the newest and provides gating and some differences that make it different
-from its predecesors. It has its own driver since some time ago. The ralink
-SoCs we are taking about are RT2880, RT3050, RT3052, RT3350, RT3352, RT3883,
-RT5350, MT7620, MT7628 and MT7688. Mostly the code in this new driver has
-been extracted from 'arch/mips/ralink' and cleanly put using kernel clock
-driver APIs. The clock plans for this SoCs only talks about relation between
-CPU frequency and BUS frequency. This relation is different depending on the
-particular SoC. CPU clock is derived from XTAL frequencies.
-
-Depending on the SoC we have the following frequencies:
-* RT2880 SoC:
- - XTAL: 40 MHz.
- - CPU: 250, 266, 280 or 300 MHz.
- - BUS: CPU / 2 MHz.
-* RT3050, RT3052, RT3350:
- - XTAL: 40 MHz.
- - CPU: 320 or 384 MHz.
- - BUS: CPU / 3 MHz.
-* RT3352:
- - XTAL: 40 MHz.
- - CPU: 384 or 400 MHz.
- - BUS: CPU / 3 MHz.
- - PERIPH: 40 MHz.
-* RT3383:
- - XTAL: 40 MHz.
- - CPU: 250, 384, 480 or 500 MHz.
- - BUS: Depends on RAM Type and CPU:
- + RAM DDR2: 125. ELSE 83 MHz.
- + RAM DDR2: 128. ELSE 96 MHz.
- + RAM DDR2: 160. ELSE 120 MHz.
- + RAM DDR2: 166. ELSE 125 MHz.
-* RT5350:
- - XTAL: 40 MHz.
- - CPU: 300, 320 or 360 MHz.
- - BUS: CPU / 3, CPU / 4, CPU / 3 MHz.
- - PERIPH: 40 MHz.
-* MT7628 and MT7688:
- - XTAL: 20 MHz or 40 MHz.
- - CPU: 575 or 580 MHz.
- - BUS: CPU / 3.
- - PCMI2S: 480 MHz.
- - PERIPH: 40 MHz.
-* MT7620:
- - XTAL: 20 MHz or 40 MHz.
- - PLL: XTAL, 480, 600 MHz.
- - CPU: depends on PLL and some mult and dividers.
- - BUS: depends on PLL and some mult and dividers.
- - PERIPH: 40 or XTAL MHz.
-
-MT7620 is a bit more complex deriving CPU clock from a PLL and an bunch of
-register reads and predividers. To derive CPU and BUS frequencies in the
-MT7620 SoC 'mt7620_calc_rate()' helper is used.
-
-In the case XTAL can have different frequencies and we need a different
-clock frequency for peripherals 'periph' clock in introduced.
-
-The rest of the peripherals present in the SoC just follow their parent
-frequencies.
-
-With this information the clk driver will provide all the clock and reset
-functionality from a set of hardcoded clocks allowing to define a nice
-device tree without fixed clocks.
-
-Acked-by: Stephen Boyd <sboyd at kernel.org>
-Signed-off-by: Sergio Paracuellos <sergio.paracuellos at gmail.com>
-Signed-off-by: Thomas Bogendoerfer <tsbogend at alpha.franken.de>
----
- drivers/clk/ralink/Kconfig | 7 +
- drivers/clk/ralink/Makefile | 1 +
- drivers/clk/ralink/clk-mtmips.c | 1115 +++++++++++++++++++++++++++++++++++++++
- 3 files changed, 1123 insertions(+)
- create mode 100644 drivers/clk/ralink/clk-mtmips.c
-
---- a/drivers/clk/ralink/Kconfig
-+++ b/drivers/clk/ralink/Kconfig
-@@ -9,3 +9,10 @@ config CLK_MT7621
- select MFD_SYSCON
- help
- This driver supports MediaTek MT7621 basic clocks.
-+
-+config CLK_MTMIPS
-+ bool "Clock driver for MTMIPS SoCs"
-+ depends on SOC_RT305X || SOC_RT288X || SOC_RT3883 || SOC_MT7620 || COMPILE_TEST
-+ select MFD_SYSCON
-+ help
-+ This driver supports MTMIPS basic clocks.
---- a/drivers/clk/ralink/Makefile
-+++ b/drivers/clk/ralink/Makefile
-@@ -1,2 +1,3 @@
- # SPDX-License-Identifier: GPL-2.0
- obj-$(CONFIG_CLK_MT7621) += clk-mt7621.o
-+obj-$(CONFIG_CLK_MTMIPS) += clk-mtmips.o
---- /dev/null
-+++ b/drivers/clk/ralink/clk-mtmips.c
-@@ -0,0 +1,1115 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * MTMIPS SoCs Clock Driver
-+ * Author: Sergio Paracuellos <sergio.paracuellos at gmail.com>
-+ */
-+
-+#include <linux/bitops.h>
-+#include <linux/clk-provider.h>
-+#include <linux/mfd/syscon.h>
-+#include <linux/platform_device.h>
-+#include <linux/regmap.h>
-+#include <linux/reset-controller.h>
-+#include <linux/slab.h>
-+
-+/* Configuration registers */
-+#define SYSC_REG_SYSTEM_CONFIG 0x10
-+#define SYSC_REG_CLKCFG0 0x2c
-+#define SYSC_REG_RESET_CTRL 0x34
-+#define SYSC_REG_CPU_SYS_CLKCFG 0x3c
-+#define SYSC_REG_CPLL_CONFIG0 0x54
-+#define SYSC_REG_CPLL_CONFIG1 0x58
-+
-+/* RT2880 SoC */
-+#define RT2880_CONFIG_CPUCLK_SHIFT 20
-+#define RT2880_CONFIG_CPUCLK_MASK 0x3
-+#define RT2880_CONFIG_CPUCLK_250 0x0
-+#define RT2880_CONFIG_CPUCLK_266 0x1
-+#define RT2880_CONFIG_CPUCLK_280 0x2
-+#define RT2880_CONFIG_CPUCLK_300 0x3
-+
-+/* RT305X SoC */
-+#define RT305X_SYSCFG_CPUCLK_SHIFT 18
-+#define RT305X_SYSCFG_CPUCLK_MASK 0x1
-+#define RT305X_SYSCFG_CPUCLK_LOW 0x0
-+#define RT305X_SYSCFG_CPUCLK_HIGH 0x1
-+
-+/* RT3352 SoC */
-+#define RT3352_SYSCFG0_CPUCLK_SHIFT 8
-+#define RT3352_SYSCFG0_CPUCLK_MASK 0x1
-+#define RT3352_SYSCFG0_CPUCLK_LOW 0x0
-+#define RT3352_SYSCFG0_CPUCLK_HIGH 0x1
-+
-+/* RT3383 SoC */
-+#define RT3883_SYSCFG0_DRAM_TYPE_DDR2 BIT(17)
-+#define RT3883_SYSCFG0_CPUCLK_SHIFT 8
-+#define RT3883_SYSCFG0_CPUCLK_MASK 0x3
-+#define RT3883_SYSCFG0_CPUCLK_250 0x0
-+#define RT3883_SYSCFG0_CPUCLK_384 0x1
-+#define RT3883_SYSCFG0_CPUCLK_480 0x2
-+#define RT3883_SYSCFG0_CPUCLK_500 0x3
-+
-+/* RT5350 SoC */
-+#define RT5350_CLKCFG0_XTAL_SEL BIT(20)
-+#define RT5350_SYSCFG0_CPUCLK_SHIFT 8
-+#define RT5350_SYSCFG0_CPUCLK_MASK 0x3
-+#define RT5350_SYSCFG0_CPUCLK_360 0x0
-+#define RT5350_SYSCFG0_CPUCLK_320 0x2
-+#define RT5350_SYSCFG0_CPUCLK_300 0x3
-+
-+/* MT7620 and MT76x8 SoCs */
-+#define MT7620_XTAL_FREQ_SEL BIT(6)
-+#define CPLL_CFG0_SW_CFG BIT(31)
-+#define CPLL_CFG0_PLL_MULT_RATIO_SHIFT 16
-+#define CPLL_CFG0_PLL_MULT_RATIO_MASK 0x7
-+#define CPLL_CFG0_LC_CURFCK BIT(15)
-+#define CPLL_CFG0_BYPASS_REF_CLK BIT(14)
-+#define CPLL_CFG0_PLL_DIV_RATIO_SHIFT 10
-+#define CPLL_CFG0_PLL_DIV_RATIO_MASK 0x3
-+#define CPLL_CFG1_CPU_AUX1 BIT(25)
-+#define CPLL_CFG1_CPU_AUX0 BIT(24)
-+#define CLKCFG0_PERI_CLK_SEL BIT(4)
-+#define CPU_SYS_CLKCFG_OCP_RATIO_SHIFT 16
-+#define CPU_SYS_CLKCFG_OCP_RATIO_MASK 0xf
-+#define CPU_SYS_CLKCFG_OCP_RATIO_1 0 /* 1:1 (Reserved) */
-+#define CPU_SYS_CLKCFG_OCP_RATIO_1_5 1 /* 1:1.5 (Reserved) */
-+#define CPU_SYS_CLKCFG_OCP_RATIO_2 2 /* 1:2 */
-+#define CPU_SYS_CLKCFG_OCP_RATIO_2_5 3 /* 1:2.5 (Reserved) */
-+#define CPU_SYS_CLKCFG_OCP_RATIO_3 4 /* 1:3 */
-+#define CPU_SYS_CLKCFG_OCP_RATIO_3_5 5 /* 1:3.5 (Reserved) */
-+#define CPU_SYS_CLKCFG_OCP_RATIO_4 6 /* 1:4 */
-+#define CPU_SYS_CLKCFG_OCP_RATIO_5 7 /* 1:5 */
-+#define CPU_SYS_CLKCFG_OCP_RATIO_10 8 /* 1:10 */
-+#define CPU_SYS_CLKCFG_CPU_FDIV_SHIFT 8
-+#define CPU_SYS_CLKCFG_CPU_FDIV_MASK 0x1f
-+#define CPU_SYS_CLKCFG_CPU_FFRAC_SHIFT 0
-+#define CPU_SYS_CLKCFG_CPU_FFRAC_MASK 0x1f
-+
-+/* clock scaling */
-+#define CLKCFG_FDIV_MASK 0x1f00
-+#define CLKCFG_FDIV_USB_VAL 0x0300
-+#define CLKCFG_FFRAC_MASK 0x001f
-+#define CLKCFG_FFRAC_USB_VAL 0x0003
-+
-+struct mtmips_clk;
-+struct mtmips_clk_fixed;
-+struct mtmips_clk_factor;
-+
-+struct mtmips_clk_data {
-+ struct mtmips_clk *clk_base;
-+ size_t num_clk_base;
-+ struct mtmips_clk_fixed *clk_fixed;
-+ size_t num_clk_fixed;
-+ struct mtmips_clk_factor *clk_factor;
-+ size_t num_clk_factor;
-+ struct mtmips_clk *clk_periph;
-+ size_t num_clk_periph;
-+};
-+
-+struct mtmips_clk_priv {
-+ struct regmap *sysc;
-+ const struct mtmips_clk_data *data;
-+};
-+
-+struct mtmips_clk {
-+ struct clk_hw hw;
-+ struct mtmips_clk_priv *priv;
-+};
-+
-+struct mtmips_clk_fixed {
-+ const char *name;
-+ const char *parent;
-+ unsigned long rate;
-+ struct clk_hw *hw;
-+};
-+
-+struct mtmips_clk_factor {
-+ const char *name;
-+ const char *parent;
-+ int mult;
-+ int div;
-+ unsigned long flags;
-+ struct clk_hw *hw;
-+};
-+
-+static unsigned long mtmips_pherip_clk_rate(struct clk_hw *hw,
-+ unsigned long parent_rate)
-+{
-+ return parent_rate;
-+}
-+
-+static const struct clk_ops mtmips_periph_clk_ops = {
-+ .recalc_rate = mtmips_pherip_clk_rate,
-+};
-+
-+#define CLK_PERIPH(_name, _parent) { \
-+ .init = &(const struct clk_init_data) { \
-+ .name = _name, \
-+ .ops = &mtmips_periph_clk_ops, \
-+ .parent_data = &(const struct clk_parent_data) {\
-+ .name = _parent, \
-+ .fw_name = _parent \
-+ }, \
-+ .num_parents = 1, \
-+ /* \
-+ * There are drivers for these SoCs that are \
-+ * older than clock driver and are not prepared \
-+ * for the clock. We don't want the kernel to \
-+ * disable anything so we add CLK_IS_CRITICAL \
-+ * flag here. \
-+ */ \
-+ .flags = CLK_SET_RATE_PARENT | CLK_IS_CRITICAL \
-+ }, \
-+}
-+
-+static struct mtmips_clk rt2880_pherip_clks[] = {
-+ { CLK_PERIPH("300100.timer", "bus") },
-+ { CLK_PERIPH("300120.watchdog", "bus") },
-+ { CLK_PERIPH("300500.uart", "bus") },
-+ { CLK_PERIPH("300900.i2c", "bus") },
-+ { CLK_PERIPH("300c00.uartlite", "bus") },
-+ { CLK_PERIPH("400000.ethernet", "bus") },
-+ { CLK_PERIPH("480000.wmac", "xtal") }
-+};
-+
-+static struct mtmips_clk rt305x_pherip_clks[] = {
-+ { CLK_PERIPH("10000100.timer", "bus") },
-+ { CLK_PERIPH("10000120.watchdog", "bus") },
-+ { CLK_PERIPH("10000500.uart", "bus") },
-+ { CLK_PERIPH("10000900.i2c", "bus") },
-+ { CLK_PERIPH("10000a00.i2s", "bus") },
-+ { CLK_PERIPH("10000b00.spi", "bus") },
-+ { CLK_PERIPH("10000b40.spi", "bus") },
-+ { CLK_PERIPH("10000c00.uartlite", "bus") },
-+ { CLK_PERIPH("10100000.ethernet", "bus") },
-+ { CLK_PERIPH("10180000.wmac", "xtal") }
-+};
-+
-+static struct mtmips_clk rt5350_pherip_clks[] = {
-+ { CLK_PERIPH("10000100.timer", "bus") },
-+ { CLK_PERIPH("10000120.watchdog", "bus") },
-+ { CLK_PERIPH("10000500.uart", "periph") },
-+ { CLK_PERIPH("10000900.i2c", "periph") },
-+ { CLK_PERIPH("10000a00.i2s", "periph") },
-+ { CLK_PERIPH("10000b00.spi", "bus") },
-+ { CLK_PERIPH("10000b40.spi", "bus") },
-+ { CLK_PERIPH("10000c00.uartlite", "periph") },
-+ { CLK_PERIPH("10100000.ethernet", "bus") },
-+ { CLK_PERIPH("10180000.wmac", "xtal") }
-+};
-+
-+static struct mtmips_clk mt7620_pherip_clks[] = {
-+ { CLK_PERIPH("10000100.timer", "periph") },
-+ { CLK_PERIPH("10000120.watchdog", "periph") },
-+ { CLK_PERIPH("10000500.uart", "periph") },
-+ { CLK_PERIPH("10000900.i2c", "periph") },
-+ { CLK_PERIPH("10000a00.i2s", "periph") },
-+ { CLK_PERIPH("10000b00.spi", "bus") },
-+ { CLK_PERIPH("10000b40.spi", "bus") },
-+ { CLK_PERIPH("10000c00.uartlite", "periph") },
-+ { CLK_PERIPH("10180000.wmac", "xtal") }
-+};
-+
-+static struct mtmips_clk mt76x8_pherip_clks[] = {
-+ { CLK_PERIPH("10000100.timer", "periph") },
-+ { CLK_PERIPH("10000120.watchdog", "periph") },
-+ { CLK_PERIPH("10000900.i2c", "periph") },
-+ { CLK_PERIPH("10000a00.i2s", "pcmi2s") },
-+ { CLK_PERIPH("10000b00.spi", "bus") },
-+ { CLK_PERIPH("10000b40.spi", "bus") },
-+ { CLK_PERIPH("10000c00.uart0", "periph") },
-+ { CLK_PERIPH("10000d00.uart1", "periph") },
-+ { CLK_PERIPH("10000e00.uart2", "periph") },
-+ { CLK_PERIPH("10300000.wmac", "xtal") }
-+};
-+
-+static int mtmips_register_pherip_clocks(struct device_node *np,
-+ struct clk_hw_onecell_data *clk_data,
-+ struct mtmips_clk_priv *priv)
-+{
-+ struct clk_hw **hws = clk_data->hws;
-+ struct mtmips_clk *sclk;
-+ size_t idx_start = priv->data->num_clk_base + priv->data->num_clk_fixed +
-+ priv->data->num_clk_factor;
-+ int ret, i;
-+
-+ for (i = 0; i < priv->data->num_clk_periph; i++) {
-+ int idx = idx_start + i;
-+
-+ sclk = &priv->data->clk_periph[i];
-+ ret = of_clk_hw_register(np, &sclk->hw);
-+ if (ret) {
-+ pr_err("Couldn't register peripheral clock %d\n", idx);
-+ goto err_clk_unreg;
-+ }
-+
-+ hws[idx] = &sclk->hw;
-+ }
-+
-+ return 0;
-+
-+err_clk_unreg:
-+ while (--i >= 0) {
-+ sclk = &priv->data->clk_periph[i];
-+ clk_hw_unregister(&sclk->hw);
-+ }
-+ return ret;
-+}
-+
-+#define CLK_FIXED(_name, _parent, _rate) \
-+ { \
-+ .name = _name, \
-+ .parent = _parent, \
-+ .rate = _rate \
-+ }
-+
-+static struct mtmips_clk_fixed rt305x_fixed_clocks[] = {
-+ CLK_FIXED("xtal", NULL, 40000000)
-+};
-+
-+static struct mtmips_clk_fixed rt3352_fixed_clocks[] = {
-+ CLK_FIXED("periph", "xtal", 40000000)
-+};
-+
-+static struct mtmips_clk_fixed mt76x8_fixed_clocks[] = {
-+ CLK_FIXED("pcmi2s", "xtal", 480000000),
-+ CLK_FIXED("periph", "xtal", 40000000)
-+};
-+
-+static int mtmips_register_fixed_clocks(struct clk_hw_onecell_data *clk_data,
-+ struct mtmips_clk_priv *priv)
-+{
-+ struct clk_hw **hws = clk_data->hws;
-+ struct mtmips_clk_fixed *sclk;
-+ size_t idx_start = priv->data->num_clk_base;
-+ int ret, i;
-+
-+ for (i = 0; i < priv->data->num_clk_fixed; i++) {
-+ int idx = idx_start + i;
-+
-+ sclk = &priv->data->clk_fixed[i];
-+ sclk->hw = clk_hw_register_fixed_rate(NULL, sclk->name,
-+ sclk->parent, 0,
-+ sclk->rate);
-+ if (IS_ERR(sclk->hw)) {
-+ pr_err("Couldn't register fixed clock %d\n", idx);
-+ goto err_clk_unreg;
-+ }
-+
-+ hws[idx] = sclk->hw;
-+ }
-+
-+ return 0;
-+
-+err_clk_unreg:
-+ while (--i >= 0) {
-+ sclk = &priv->data->clk_fixed[i];
-+ clk_hw_unregister_fixed_rate(sclk->hw);
-+ }
-+ return ret;
-+}
-+
-+#define CLK_FACTOR(_name, _parent, _mult, _div) \
-+ { \
-+ .name = _name, \
-+ .parent = _parent, \
-+ .mult = _mult, \
-+ .div = _div, \
-+ .flags = CLK_SET_RATE_PARENT \
-+ }
-+
-+static struct mtmips_clk_factor rt2880_factor_clocks[] = {
-+ CLK_FACTOR("bus", "cpu", 1, 2)
-+};
-+
-+static struct mtmips_clk_factor rt305x_factor_clocks[] = {
-+ CLK_FACTOR("bus", "cpu", 1, 3)
-+};
-+
-+static int mtmips_register_factor_clocks(struct clk_hw_onecell_data *clk_data,
-+ struct mtmips_clk_priv *priv)
-+{
-+ struct clk_hw **hws = clk_data->hws;
-+ struct mtmips_clk_factor *sclk;
-+ size_t idx_start = priv->data->num_clk_base + priv->data->num_clk_fixed;
-+ int ret, i;
-+
-+ for (i = 0; i < priv->data->num_clk_factor; i++) {
-+ int idx = idx_start + i;
-+
-+ sclk = &priv->data->clk_factor[i];
-+ sclk->hw = clk_hw_register_fixed_factor(NULL, sclk->name,
-+ sclk->parent, sclk->flags,
-+ sclk->mult, sclk->div);
-+ if (IS_ERR(sclk->hw)) {
-+ pr_err("Couldn't register factor clock %d\n", idx);
-+ goto err_clk_unreg;
-+ }
-+
-+ hws[idx] = sclk->hw;
-+ }
-+
-+ return 0;
-+
-+err_clk_unreg:
-+ while (--i >= 0) {
-+ sclk = &priv->data->clk_factor[i];
-+ clk_hw_unregister_fixed_factor(sclk->hw);
-+ }
-+ return ret;
-+}
-+
-+static inline struct mtmips_clk *to_mtmips_clk(struct clk_hw *hw)
-+{
-+ return container_of(hw, struct mtmips_clk, hw);
-+}
-+
-+static unsigned long rt5350_xtal_recalc_rate(struct clk_hw *hw,
-+ unsigned long parent_rate)
-+{
-+ struct mtmips_clk *clk = to_mtmips_clk(hw);
-+ struct regmap *sysc = clk->priv->sysc;
-+ u32 val;
-+
-+ regmap_read(sysc, SYSC_REG_SYSTEM_CONFIG, &val);
-+ if (!(val & RT5350_CLKCFG0_XTAL_SEL))
-+ return 20000000;
-+
-+ return 40000000;
-+}
-+
-+static unsigned long rt5350_cpu_recalc_rate(struct clk_hw *hw,
-+ unsigned long xtal_clk)
-+{
-+ struct mtmips_clk *clk = to_mtmips_clk(hw);
-+ struct regmap *sysc = clk->priv->sysc;
-+ u32 t;
-+
-+ regmap_read(sysc, SYSC_REG_SYSTEM_CONFIG, &t);
-+ t = (t >> RT5350_SYSCFG0_CPUCLK_SHIFT) & RT5350_SYSCFG0_CPUCLK_MASK;
-+
-+ switch (t) {
-+ case RT5350_SYSCFG0_CPUCLK_360:
-+ return 360000000;
-+ case RT5350_SYSCFG0_CPUCLK_320:
-+ return 320000000;
-+ case RT5350_SYSCFG0_CPUCLK_300:
-+ return 300000000;
-+ default:
-+ BUG();
-+ }
-+}
-+
-+static unsigned long rt5350_bus_recalc_rate(struct clk_hw *hw,
-+ unsigned long parent_rate)
-+{
-+ if (parent_rate == 320000000)
-+ return parent_rate / 4;
-+
-+ return parent_rate / 3;
-+}
-+
-+static unsigned long rt3352_cpu_recalc_rate(struct clk_hw *hw,
-+ unsigned long xtal_clk)
-+{
-+ struct mtmips_clk *clk = to_mtmips_clk(hw);
-+ struct regmap *sysc = clk->priv->sysc;
-+ u32 t;
-+
-+ regmap_read(sysc, SYSC_REG_SYSTEM_CONFIG, &t);
-+ t = (t >> RT3352_SYSCFG0_CPUCLK_SHIFT) & RT3352_SYSCFG0_CPUCLK_MASK;
-+
-+ switch (t) {
-+ case RT3352_SYSCFG0_CPUCLK_LOW:
-+ return 384000000;
-+ case RT3352_SYSCFG0_CPUCLK_HIGH:
-+ return 400000000;
-+ default:
-+ BUG();
-+ }
-+}
-+
-+static unsigned long rt305x_cpu_recalc_rate(struct clk_hw *hw,
-+ unsigned long xtal_clk)
-+{
-+ struct mtmips_clk *clk = to_mtmips_clk(hw);
-+ struct regmap *sysc = clk->priv->sysc;
-+ u32 t;
-+
-+ regmap_read(sysc, SYSC_REG_SYSTEM_CONFIG, &t);
-+ t = (t >> RT305X_SYSCFG_CPUCLK_SHIFT) & RT305X_SYSCFG_CPUCLK_MASK;
-+
-+ switch (t) {
-+ case RT305X_SYSCFG_CPUCLK_LOW:
-+ return 320000000;
-+ case RT305X_SYSCFG_CPUCLK_HIGH:
-+ return 384000000;
-+ default:
-+ BUG();
-+ }
-+}
-+
-+static unsigned long rt3883_cpu_recalc_rate(struct clk_hw *hw,
-+ unsigned long xtal_clk)
-+{
-+ struct mtmips_clk *clk = to_mtmips_clk(hw);
-+ struct regmap *sysc = clk->priv->sysc;
-+ u32 t;
-+
-+ regmap_read(sysc, SYSC_REG_SYSTEM_CONFIG, &t);
-+ t = (t >> RT3883_SYSCFG0_CPUCLK_SHIFT) & RT3883_SYSCFG0_CPUCLK_MASK;
-+
-+ switch (t) {
-+ case RT3883_SYSCFG0_CPUCLK_250:
-+ return 250000000;
-+ case RT3883_SYSCFG0_CPUCLK_384:
-+ return 384000000;
-+ case RT3883_SYSCFG0_CPUCLK_480:
-+ return 480000000;
-+ case RT3883_SYSCFG0_CPUCLK_500:
-+ return 500000000;
-+ default:
-+ BUG();
-+ }
-+}
-+
-+static unsigned long rt3883_bus_recalc_rate(struct clk_hw *hw,
-+ unsigned long parent_rate)
-+{
-+ struct mtmips_clk *clk = to_mtmips_clk(hw);
-+ struct regmap *sysc = clk->priv->sysc;
-+ u32 ddr2;
-+ u32 t;
-+
-+ regmap_read(sysc, SYSC_REG_SYSTEM_CONFIG, &t);
-+ ddr2 = t & RT3883_SYSCFG0_DRAM_TYPE_DDR2;
-+
-+ switch (parent_rate) {
-+ case 250000000:
-+ return (ddr2) ? 125000000 : 83000000;
-+ case 384000000:
-+ return (ddr2) ? 128000000 : 96000000;
-+ case 480000000:
-+ return (ddr2) ? 160000000 : 120000000;
-+ case 500000000:
-+ return (ddr2) ? 166000000 : 125000000;
-+ default:
-+ WARN_ON_ONCE(parent_rate == 0);
-+ return parent_rate / 4;
-+ }
-+}
-+
-+static unsigned long rt2880_cpu_recalc_rate(struct clk_hw *hw,
-+ unsigned long xtal_clk)
-+{
-+ struct mtmips_clk *clk = to_mtmips_clk(hw);
-+ struct regmap *sysc = clk->priv->sysc;
-+ u32 t;
-+
-+ regmap_read(sysc, SYSC_REG_SYSTEM_CONFIG, &t);
-+ t = (t >> RT2880_CONFIG_CPUCLK_SHIFT) & RT2880_CONFIG_CPUCLK_MASK;
-+
-+ switch (t) {
-+ case RT2880_CONFIG_CPUCLK_250:
-+ return 250000000;
-+ case RT2880_CONFIG_CPUCLK_266:
-+ return 266000000;
-+ case RT2880_CONFIG_CPUCLK_280:
-+ return 280000000;
-+ case RT2880_CONFIG_CPUCLK_300:
-+ return 300000000;
-+ default:
-+ BUG();
-+ }
-+}
-+
-+static u32 mt7620_calc_rate(u32 ref_rate, u32 mul, u32 div)
-+{
-+ u64 t;
-+
-+ t = ref_rate;
-+ t *= mul;
-+ t = div_u64(t, div);
-+
-+ return t;
-+}
-+
-+static unsigned long mt7620_pll_recalc_rate(struct clk_hw *hw,
-+ unsigned long parent_rate)
-+{
-+ static const u32 clk_divider[] = { 2, 3, 4, 8 };
-+ struct mtmips_clk *clk = to_mtmips_clk(hw);
-+ struct regmap *sysc = clk->priv->sysc;
-+ unsigned long cpu_pll;
-+ u32 t;
-+ u32 mul;
-+ u32 div;
-+
-+ regmap_read(sysc, SYSC_REG_CPLL_CONFIG0, &t);
-+ if (t & CPLL_CFG0_BYPASS_REF_CLK) {
-+ cpu_pll = parent_rate;
-+ } else if ((t & CPLL_CFG0_SW_CFG) == 0) {
-+ cpu_pll = 600000000;
-+ } else {
-+ mul = (t >> CPLL_CFG0_PLL_MULT_RATIO_SHIFT) &
-+ CPLL_CFG0_PLL_MULT_RATIO_MASK;
-+ mul += 24;
-+ if (t & CPLL_CFG0_LC_CURFCK)
-+ mul *= 2;
-+
-+ div = (t >> CPLL_CFG0_PLL_DIV_RATIO_SHIFT) &
-+ CPLL_CFG0_PLL_DIV_RATIO_MASK;
-+
-+ WARN_ON_ONCE(div >= ARRAY_SIZE(clk_divider));
-+
-+ cpu_pll = mt7620_calc_rate(parent_rate, mul, clk_divider[div]);
-+ }
-+
-+ regmap_read(sysc, SYSC_REG_CPLL_CONFIG1, &t);
-+ if (t & CPLL_CFG1_CPU_AUX1)
-+ return parent_rate;
-+
-+ if (t & CPLL_CFG1_CPU_AUX0)
-+ return 480000000;
-+
-+ return cpu_pll;
-+}
-+
-+static unsigned long mt7620_cpu_recalc_rate(struct clk_hw *hw,
-+ unsigned long parent_rate)
-+{
-+ struct mtmips_clk *clk = to_mtmips_clk(hw);
-+ struct regmap *sysc = clk->priv->sysc;
-+ u32 t;
-+ u32 mul;
-+ u32 div;
-+
-+ regmap_read(sysc, SYSC_REG_CPU_SYS_CLKCFG, &t);
-+ mul = t & CPU_SYS_CLKCFG_CPU_FFRAC_MASK;
-+ div = (t >> CPU_SYS_CLKCFG_CPU_FDIV_SHIFT) &
-+ CPU_SYS_CLKCFG_CPU_FDIV_MASK;
-+
-+ return mt7620_calc_rate(parent_rate, mul, div);
-+}
-+
-+static unsigned long mt7620_bus_recalc_rate(struct clk_hw *hw,
-+ unsigned long parent_rate)
-+{
-+ static const u32 ocp_dividers[16] = {
-+ [CPU_SYS_CLKCFG_OCP_RATIO_2] = 2,
-+ [CPU_SYS_CLKCFG_OCP_RATIO_3] = 3,
-+ [CPU_SYS_CLKCFG_OCP_RATIO_4] = 4,
-+ [CPU_SYS_CLKCFG_OCP_RATIO_5] = 5,
-+ [CPU_SYS_CLKCFG_OCP_RATIO_10] = 10,
-+ };
-+ struct mtmips_clk *clk = to_mtmips_clk(hw);
-+ struct regmap *sysc = clk->priv->sysc;
-+ u32 t;
-+ u32 ocp_ratio;
-+ u32 div;
-+
-+ regmap_read(sysc, SYSC_REG_CPU_SYS_CLKCFG, &t);
-+ ocp_ratio = (t >> CPU_SYS_CLKCFG_OCP_RATIO_SHIFT) &
-+ CPU_SYS_CLKCFG_OCP_RATIO_MASK;
-+
-+ if (WARN_ON_ONCE(ocp_ratio >= ARRAY_SIZE(ocp_dividers)))
-+ return parent_rate;
-+
-+ div = ocp_dividers[ocp_ratio];
-+
-+ if (WARN(!div, "invalid divider for OCP ratio %u", ocp_ratio))
-+ return parent_rate;
-+
-+ return parent_rate / div;
-+}
-+
-+static unsigned long mt7620_periph_recalc_rate(struct clk_hw *hw,
-+ unsigned long parent_rate)
-+{
-+ struct mtmips_clk *clk = to_mtmips_clk(hw);
-+ struct regmap *sysc = clk->priv->sysc;
-+ u32 t;
-+
-+ regmap_read(sysc, SYSC_REG_CLKCFG0, &t);
-+ if (t & CLKCFG0_PERI_CLK_SEL)
-+ return parent_rate;
-+
-+ return 40000000;
-+}
-+
-+static unsigned long mt76x8_xtal_recalc_rate(struct clk_hw *hw,
-+ unsigned long parent_rate)
-+{
-+ struct mtmips_clk *clk = to_mtmips_clk(hw);
-+ struct regmap *sysc = clk->priv->sysc;
-+ u32 t;
-+
-+ regmap_read(sysc, SYSC_REG_SYSTEM_CONFIG, &t);
-+ if (t & MT7620_XTAL_FREQ_SEL)
-+ return 40000000;
-+
-+ return 20000000;
-+}
-+
-+static unsigned long mt76x8_cpu_recalc_rate(struct clk_hw *hw,
-+ unsigned long xtal_clk)
-+{
-+ if (xtal_clk == 40000000)
-+ return 580000000;
-+
-+ return 575000000;
-+}
-+
-+#define CLK_BASE(_name, _parent, _recalc) { \
-+ .init = &(const struct clk_init_data) { \
-+ .name = _name, \
-+ .ops = &(const struct clk_ops) { \
-+ .recalc_rate = _recalc, \
-+ }, \
-+ .parent_data = &(const struct clk_parent_data) { \
-+ .name = _parent, \
-+ .fw_name = _parent \
-+ }, \
-+ .num_parents = _parent ? 1 : 0 \
-+ }, \
-+}
-+
-+static struct mtmips_clk rt2880_clks_base[] = {
-+ { CLK_BASE("cpu", "xtal", rt2880_cpu_recalc_rate) }
-+};
-+
-+static struct mtmips_clk rt305x_clks_base[] = {
-+ { CLK_BASE("cpu", "xtal", rt305x_cpu_recalc_rate) }
-+};
-+
-+static struct mtmips_clk rt3352_clks_base[] = {
-+ { CLK_BASE("xtal", NULL, rt5350_xtal_recalc_rate) },
-+ { CLK_BASE("cpu", "xtal", rt3352_cpu_recalc_rate) }
-+};
-+
-+static struct mtmips_clk rt3883_clks_base[] = {
-+ { CLK_BASE("cpu", "xtal", rt3883_cpu_recalc_rate) },
-+ { CLK_BASE("bus", "cpu", rt3883_bus_recalc_rate) }
-+};
-+
-+static struct mtmips_clk rt5350_clks_base[] = {
-+ { CLK_BASE("xtal", NULL, rt5350_xtal_recalc_rate) },
-+ { CLK_BASE("cpu", "xtal", rt5350_cpu_recalc_rate) },
-+ { CLK_BASE("bus", "cpu", rt5350_bus_recalc_rate) }
-+};
-+
-+static struct mtmips_clk mt7620_clks_base[] = {
-+ { CLK_BASE("xtal", NULL, mt76x8_xtal_recalc_rate) },
-+ { CLK_BASE("pll", "xtal", mt7620_pll_recalc_rate) },
-+ { CLK_BASE("cpu", "pll", mt7620_cpu_recalc_rate) },
-+ { CLK_BASE("periph", "xtal", mt7620_periph_recalc_rate) },
-+ { CLK_BASE("bus", "cpu", mt7620_bus_recalc_rate) }
-+};
-+
-+static struct mtmips_clk mt76x8_clks_base[] = {
-+ { CLK_BASE("xtal", NULL, mt76x8_xtal_recalc_rate) },
-+ { CLK_BASE("cpu", "xtal", mt76x8_cpu_recalc_rate) }
-+};
-+
-+static int mtmips_register_clocks(struct device_node *np,
-+ struct clk_hw_onecell_data *clk_data,
-+ struct mtmips_clk_priv *priv)
-+{
-+ struct clk_hw **hws = clk_data->hws;
-+ struct mtmips_clk *sclk;
-+ int ret, i;
-+
-+ for (i = 0; i < priv->data->num_clk_base; i++) {
-+ sclk = &priv->data->clk_base[i];
-+ sclk->priv = priv;
-+ ret = of_clk_hw_register(np, &sclk->hw);
-+ if (ret) {
-+ pr_err("Couldn't register top clock %i\n", i);
-+ goto err_clk_unreg;
-+ }
-+
-+ hws[i] = &sclk->hw;
-+ }
-+
-+ return 0;
-+
-+err_clk_unreg:
-+ while (--i >= 0) {
-+ sclk = &priv->data->clk_base[i];
-+ clk_hw_unregister(&sclk->hw);
-+ }
-+ return ret;
-+}
-+
-+static const struct mtmips_clk_data rt2880_clk_data = {
-+ .clk_base = rt2880_clks_base,
-+ .num_clk_base = ARRAY_SIZE(rt2880_clks_base),
-+ .clk_fixed = rt305x_fixed_clocks,
-+ .num_clk_fixed = ARRAY_SIZE(rt305x_fixed_clocks),
-+ .clk_factor = rt2880_factor_clocks,
-+ .num_clk_factor = ARRAY_SIZE(rt2880_factor_clocks),
-+ .clk_periph = rt2880_pherip_clks,
-+ .num_clk_periph = ARRAY_SIZE(rt2880_pherip_clks),
-+};
-+
-+static const struct mtmips_clk_data rt305x_clk_data = {
-+ .clk_base = rt305x_clks_base,
-+ .num_clk_base = ARRAY_SIZE(rt305x_clks_base),
-+ .clk_fixed = rt305x_fixed_clocks,
-+ .num_clk_fixed = ARRAY_SIZE(rt305x_fixed_clocks),
-+ .clk_factor = rt305x_factor_clocks,
-+ .num_clk_factor = ARRAY_SIZE(rt305x_factor_clocks),
-+ .clk_periph = rt305x_pherip_clks,
-+ .num_clk_periph = ARRAY_SIZE(rt305x_pherip_clks),
-+};
-+
-+static const struct mtmips_clk_data rt3352_clk_data = {
-+ .clk_base = rt3352_clks_base,
-+ .num_clk_base = ARRAY_SIZE(rt3352_clks_base),
-+ .clk_fixed = rt3352_fixed_clocks,
-+ .num_clk_fixed = ARRAY_SIZE(rt3352_fixed_clocks),
-+ .clk_factor = rt305x_factor_clocks,
-+ .num_clk_factor = ARRAY_SIZE(rt305x_factor_clocks),
-+ .clk_periph = rt5350_pherip_clks,
-+ .num_clk_periph = ARRAY_SIZE(rt5350_pherip_clks),
-+};
-+
-+static const struct mtmips_clk_data rt3883_clk_data = {
-+ .clk_base = rt3883_clks_base,
-+ .num_clk_base = ARRAY_SIZE(rt3883_clks_base),
-+ .clk_fixed = rt305x_fixed_clocks,
-+ .num_clk_fixed = ARRAY_SIZE(rt305x_fixed_clocks),
-+ .clk_factor = NULL,
-+ .num_clk_factor = 0,
-+ .clk_periph = rt5350_pherip_clks,
-+ .num_clk_periph = ARRAY_SIZE(rt5350_pherip_clks),
-+};
-+
-+static const struct mtmips_clk_data rt5350_clk_data = {
-+ .clk_base = rt5350_clks_base,
-+ .num_clk_base = ARRAY_SIZE(rt5350_clks_base),
-+ .clk_fixed = rt3352_fixed_clocks,
-+ .num_clk_fixed = ARRAY_SIZE(rt3352_fixed_clocks),
-+ .clk_factor = NULL,
-+ .num_clk_factor = 0,
-+ .clk_periph = rt5350_pherip_clks,
-+ .num_clk_periph = ARRAY_SIZE(rt5350_pherip_clks),
-+};
-+
-+static const struct mtmips_clk_data mt7620_clk_data = {
-+ .clk_base = mt7620_clks_base,
-+ .num_clk_base = ARRAY_SIZE(mt7620_clks_base),
-+ .clk_fixed = NULL,
-+ .num_clk_fixed = 0,
-+ .clk_factor = NULL,
-+ .num_clk_factor = 0,
-+ .clk_periph = mt7620_pherip_clks,
-+ .num_clk_periph = ARRAY_SIZE(mt7620_pherip_clks),
-+};
-+
-+static const struct mtmips_clk_data mt76x8_clk_data = {
-+ .clk_base = mt76x8_clks_base,
-+ .num_clk_base = ARRAY_SIZE(mt76x8_clks_base),
-+ .clk_fixed = mt76x8_fixed_clocks,
-+ .num_clk_fixed = ARRAY_SIZE(mt76x8_fixed_clocks),
-+ .clk_factor = rt305x_factor_clocks,
-+ .num_clk_factor = ARRAY_SIZE(rt305x_factor_clocks),
-+ .clk_periph = mt76x8_pherip_clks,
-+ .num_clk_periph = ARRAY_SIZE(mt76x8_pherip_clks),
-+};
-+
-+static const struct of_device_id mtmips_of_match[] = {
-+ {
-+ .compatible = "ralink,rt2880-sysc",
-+ .data = &rt2880_clk_data,
-+ },
-+ {
-+ .compatible = "ralink,rt3050-sysc",
-+ .data = &rt305x_clk_data,
-+ },
-+ {
-+ .compatible = "ralink,rt3052-sysc",
-+ .data = &rt305x_clk_data,
-+ },
-+ {
-+ .compatible = "ralink,rt3352-sysc",
-+ .data = &rt3352_clk_data,
-+ },
-+ {
-+ .compatible = "ralink,rt3883-sysc",
-+ .data = &rt3883_clk_data,
-+ },
-+ {
-+ .compatible = "ralink,rt5350-sysc",
-+ .data = &rt5350_clk_data,
-+ },
-+ {
-+ .compatible = "ralink,mt7620-sysc",
-+ .data = &mt7620_clk_data,
-+ },
-+ {
-+ .compatible = "ralink,mt7628-sysc",
-+ .data = &mt76x8_clk_data,
-+ },
-+ {
-+ .compatible = "ralink,mt7688-sysc",
-+ .data = &mt76x8_clk_data,
-+ },
-+ {}
-+};
-+
-+static void __init mtmips_clk_regs_init(struct device_node *node,
-+ struct mtmips_clk_priv *priv)
-+{
-+ u32 t;
-+
-+ if (!of_device_is_compatible(node, "ralink,mt7620-sysc"))
-+ return;
-+
-+ /*
-+ * When the CPU goes into sleep mode, the BUS
-+ * clock will be too low for USB to function properly.
-+ * Adjust the busses fractional divider to fix this
-+ */
-+ regmap_read(priv->sysc, SYSC_REG_CPU_SYS_CLKCFG, &t);
-+ t &= ~(CLKCFG_FDIV_MASK | CLKCFG_FFRAC_MASK);
-+ t |= CLKCFG_FDIV_USB_VAL | CLKCFG_FFRAC_USB_VAL;
-+ regmap_write(priv->sysc, SYSC_REG_CPU_SYS_CLKCFG, t);
-+}
-+
-+static void __init mtmips_clk_init(struct device_node *node)
-+{
-+ const struct of_device_id *match;
-+ const struct mtmips_clk_data *data;
-+ struct mtmips_clk_priv *priv;
-+ struct clk_hw_onecell_data *clk_data;
-+ int ret, i, count;
-+
-+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
-+ if (!priv)
-+ return;
-+
-+ priv->sysc = syscon_node_to_regmap(node);
-+ if (IS_ERR(priv->sysc)) {
-+ pr_err("Could not get sysc syscon regmap\n");
-+ goto free_clk_priv;
-+ }
-+
-+ mtmips_clk_regs_init(node, priv);
-+
-+ match = of_match_node(mtmips_of_match, node);
-+ if (WARN_ON(!match))
-+ return;
-+
-+ data = match->data;
-+ priv->data = data;
-+ count = priv->data->num_clk_base + priv->data->num_clk_fixed +
-+ priv->data->num_clk_factor + priv->data->num_clk_periph;
-+ clk_data = kzalloc(struct_size(clk_data, hws, count), GFP_KERNEL);
-+ if (!clk_data)
-+ goto free_clk_priv;
-+
-+ ret = mtmips_register_clocks(node, clk_data, priv);
-+ if (ret) {
-+ pr_err("Couldn't register top clocks\n");
-+ goto free_clk_data;
-+ }
-+
-+ ret = mtmips_register_fixed_clocks(clk_data, priv);
-+ if (ret) {
-+ pr_err("Couldn't register fixed clocks\n");
-+ goto unreg_clk_top;
-+ }
-+
-+ ret = mtmips_register_factor_clocks(clk_data, priv);
-+ if (ret) {
-+ pr_err("Couldn't register factor clocks\n");
-+ goto unreg_clk_fixed;
-+ }
-+
-+ ret = mtmips_register_pherip_clocks(node, clk_data, priv);
-+ if (ret) {
-+ pr_err("Couldn't register peripheral clocks\n");
-+ goto unreg_clk_factor;
-+ }
-+
-+ clk_data->num = count;
-+
-+ ret = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
-+ if (ret) {
-+ pr_err("Couldn't add clk hw provider\n");
-+ goto unreg_clk_periph;
-+ }
-+
-+ return;
-+
-+unreg_clk_periph:
-+ for (i = 0; i < priv->data->num_clk_periph; i++) {
-+ struct mtmips_clk *sclk = &priv->data->clk_periph[i];
-+
-+ clk_hw_unregister(&sclk->hw);
-+ }
-+
-+unreg_clk_factor:
-+ for (i = 0; i < priv->data->num_clk_factor; i++) {
-+ struct mtmips_clk_factor *sclk = &priv->data->clk_factor[i];
-+
-+ clk_hw_unregister_fixed_factor(sclk->hw);
-+ }
-+
-+unreg_clk_fixed:
-+ for (i = 0; i < priv->data->num_clk_fixed; i++) {
-+ struct mtmips_clk_fixed *sclk = &priv->data->clk_fixed[i];
-+
-+ clk_hw_unregister_fixed_rate(sclk->hw);
-+ }
-+
-+unreg_clk_top:
-+ for (i = 0; i < priv->data->num_clk_base; i++) {
-+ struct mtmips_clk *sclk = &priv->data->clk_base[i];
-+
-+ clk_hw_unregister(&sclk->hw);
-+ }
-+
-+free_clk_data:
-+ kfree(clk_data);
-+
-+free_clk_priv:
-+ kfree(priv);
-+}
-+CLK_OF_DECLARE_DRIVER(rt2880_clk, "ralink,rt2880-sysc", mtmips_clk_init);
-+CLK_OF_DECLARE_DRIVER(rt3050_clk, "ralink,rt3050-sysc", mtmips_clk_init);
-+CLK_OF_DECLARE_DRIVER(rt3052_clk, "ralink,rt3052-sysc", mtmips_clk_init);
-+CLK_OF_DECLARE_DRIVER(rt3352_clk, "ralink,rt3352-sysc", mtmips_clk_init);
-+CLK_OF_DECLARE_DRIVER(rt3883_clk, "ralink,rt3883-sysc", mtmips_clk_init);
-+CLK_OF_DECLARE_DRIVER(rt5350_clk, "ralink,rt5350-sysc", mtmips_clk_init);
-+CLK_OF_DECLARE_DRIVER(mt7620_clk, "ralink,mt7620-sysc", mtmips_clk_init);
-+CLK_OF_DECLARE_DRIVER(mt7628_clk, "ralink,mt7628-sysc", mtmips_clk_init);
-+CLK_OF_DECLARE_DRIVER(mt7688_clk, "ralink,mt7688-sysc", mtmips_clk_init);
-+
-+struct mtmips_rst {
-+ struct reset_controller_dev rcdev;
-+ struct regmap *sysc;
-+};
-+
-+static struct mtmips_rst *to_mtmips_rst(struct reset_controller_dev *dev)
-+{
-+ return container_of(dev, struct mtmips_rst, rcdev);
-+}
-+
-+static int mtmips_assert_device(struct reset_controller_dev *rcdev,
-+ unsigned long id)
-+{
-+ struct mtmips_rst *data = to_mtmips_rst(rcdev);
-+ struct regmap *sysc = data->sysc;
-+
-+ return regmap_update_bits(sysc, SYSC_REG_RESET_CTRL, BIT(id), BIT(id));
-+}
-+
-+static int mtmips_deassert_device(struct reset_controller_dev *rcdev,
-+ unsigned long id)
-+{
-+ struct mtmips_rst *data = to_mtmips_rst(rcdev);
-+ struct regmap *sysc = data->sysc;
-+
-+ return regmap_update_bits(sysc, SYSC_REG_RESET_CTRL, BIT(id), 0);
-+}
-+
-+static int mtmips_reset_device(struct reset_controller_dev *rcdev,
-+ unsigned long id)
-+{
-+ int ret;
-+
-+ ret = mtmips_assert_device(rcdev, id);
-+ if (ret < 0)
-+ return ret;
-+
-+ return mtmips_deassert_device(rcdev, id);
-+}
-+
-+static int mtmips_rst_xlate(struct reset_controller_dev *rcdev,
-+ const struct of_phandle_args *reset_spec)
-+{
-+ unsigned long id = reset_spec->args[0];
-+
-+ if (id == 0 || id >= rcdev->nr_resets)
-+ return -EINVAL;
-+
-+ return id;
-+}
-+
-+static const struct reset_control_ops reset_ops = {
-+ .reset = mtmips_reset_device,
-+ .assert = mtmips_assert_device,
-+ .deassert = mtmips_deassert_device
-+};
-+
-+static int mtmips_reset_init(struct device *dev, struct regmap *sysc)
-+{
-+ struct mtmips_rst *rst_data;
-+
-+ rst_data = devm_kzalloc(dev, sizeof(*rst_data), GFP_KERNEL);
-+ if (!rst_data)
-+ return -ENOMEM;
-+
-+ rst_data->sysc = sysc;
-+ rst_data->rcdev.ops = &reset_ops;
-+ rst_data->rcdev.owner = THIS_MODULE;
-+ rst_data->rcdev.nr_resets = 32;
-+ rst_data->rcdev.of_reset_n_cells = 1;
-+ rst_data->rcdev.of_xlate = mtmips_rst_xlate;
-+ rst_data->rcdev.of_node = dev_of_node(dev);
-+
-+ return devm_reset_controller_register(dev, &rst_data->rcdev);
-+}
-+
-+static int mtmips_clk_probe(struct platform_device *pdev)
-+{
-+ struct device_node *np = pdev->dev.of_node;
-+ struct device *dev = &pdev->dev;
-+ struct mtmips_clk_priv *priv;
-+ int ret;
-+
-+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
-+ if (!priv)
-+ return -ENOMEM;
-+
-+ priv->sysc = syscon_node_to_regmap(np);
-+ if (IS_ERR(priv->sysc))
-+ return dev_err_probe(dev, PTR_ERR(priv->sysc),
-+ "Could not get sysc syscon regmap\n");
-+
-+ ret = mtmips_reset_init(dev, priv->sysc);
-+ if (ret)
-+ return dev_err_probe(dev, ret, "Could not init reset controller\n");
-+
-+ return 0;
-+}
-+
-+static const struct of_device_id mtmips_clk_of_match[] = {
-+ { .compatible = "ralink,rt2880-reset" },
-+ { .compatible = "ralink,rt2880-sysc" },
-+ { .compatible = "ralink,rt3050-sysc" },
-+ { .compatible = "ralink,rt3052-sysc" },
-+ { .compatible = "ralink,rt3352-sysc" },
-+ { .compatible = "ralink,rt3883-sysc" },
-+ { .compatible = "ralink,rt5350-sysc" },
-+ { .compatible = "ralink,mt7620-sysc" },
-+ { .compatible = "ralink,mt7628-sysc" },
-+ { .compatible = "ralink,mt7688-sysc" },
-+ {}
-+};
-+
-+static struct platform_driver mtmips_clk_driver = {
-+ .probe = mtmips_clk_probe,
-+ .driver = {
-+ .name = "mtmips-clk",
-+ .of_match_table = mtmips_clk_of_match,
-+ },
-+};
-+
-+static int __init mtmips_clk_reset_init(void)
-+{
-+ return platform_driver_register(&mtmips_clk_driver);
-+}
-+arch_initcall(mtmips_clk_reset_init);
diff --git a/target/linux/ramips/patches-6.6/005-v6.5-03-mips-ralink-rt288x-remove-clock-related-code.patch b/target/linux/ramips/patches-6.6/005-v6.5-03-mips-ralink-rt288x-remove-clock-related-code.patch
deleted file mode 100644
index df4208b23d..0000000000
--- a/target/linux/ramips/patches-6.6/005-v6.5-03-mips-ralink-rt288x-remove-clock-related-code.patch
+++ /dev/null
@@ -1,81 +0,0 @@
-From ffcdf47379eae86dc8f8f02c62994dacf2c9038e Mon Sep 17 00:00:00 2001
-From: Sergio Paracuellos <sergio.paracuellos at gmail.com>
-Date: Mon, 19 Jun 2023 06:09:35 +0200
-Subject: [PATCH 3/9] mips: ralink: rt288x: remove clock related code
-
-A properly clock driver for ralink SoCs has been added. Hence there is no
-need to have clock related code in 'arch/mips/ralink' folder anymore.
-
-Signed-off-by: Sergio Paracuellos <sergio.paracuellos at gmail.com>
-Signed-off-by: Thomas Bogendoerfer <tsbogend at alpha.franken.de>
----
- arch/mips/include/asm/mach-ralink/rt288x.h | 10 ----------
- arch/mips/ralink/rt288x.c | 31 ------------------------------
- 2 files changed, 41 deletions(-)
-
---- a/arch/mips/include/asm/mach-ralink/rt288x.h
-+++ b/arch/mips/include/asm/mach-ralink/rt288x.h
-@@ -17,7 +17,6 @@
- #define SYSC_REG_CHIP_NAME1 0x04
- #define SYSC_REG_CHIP_ID 0x0c
- #define SYSC_REG_SYSTEM_CONFIG 0x10
--#define SYSC_REG_CLKCFG 0x30
-
- #define RT2880_CHIP_NAME0 0x38325452
- #define RT2880_CHIP_NAME1 0x20203038
-@@ -26,15 +25,6 @@
- #define CHIP_ID_ID_SHIFT 8
- #define CHIP_ID_REV_MASK 0xff
-
--#define SYSTEM_CONFIG_CPUCLK_SHIFT 20
--#define SYSTEM_CONFIG_CPUCLK_MASK 0x3
--#define SYSTEM_CONFIG_CPUCLK_250 0x0
--#define SYSTEM_CONFIG_CPUCLK_266 0x1
--#define SYSTEM_CONFIG_CPUCLK_280 0x2
--#define SYSTEM_CONFIG_CPUCLK_300 0x3
--
--#define CLKCFG_SRAM_CS_N_WDT BIT(9)
--
- #define RT2880_SDRAM_BASE 0x08000000
- #define RT2880_MEM_SIZE_MIN 2
- #define RT2880_MEM_SIZE_MAX 128
---- a/arch/mips/ralink/rt288x.c
-+++ b/arch/mips/ralink/rt288x.c
-@@ -17,37 +17,6 @@
-
- #include "common.h"
-
--void __init ralink_clk_init(void)
--{
-- unsigned long cpu_rate, wmac_rate = 40000000;
-- u32 t = rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG);
-- t = ((t >> SYSTEM_CONFIG_CPUCLK_SHIFT) & SYSTEM_CONFIG_CPUCLK_MASK);
--
-- switch (t) {
-- case SYSTEM_CONFIG_CPUCLK_250:
-- cpu_rate = 250000000;
-- break;
-- case SYSTEM_CONFIG_CPUCLK_266:
-- cpu_rate = 266666667;
-- break;
-- case SYSTEM_CONFIG_CPUCLK_280:
-- cpu_rate = 280000000;
-- break;
-- case SYSTEM_CONFIG_CPUCLK_300:
-- cpu_rate = 300000000;
-- break;
-- }
--
-- ralink_clk_add("cpu", cpu_rate);
-- ralink_clk_add("300100.timer", cpu_rate / 2);
-- ralink_clk_add("300120.watchdog", cpu_rate / 2);
-- ralink_clk_add("300500.uart", cpu_rate / 2);
-- ralink_clk_add("300900.i2c", cpu_rate / 2);
-- ralink_clk_add("300c00.uartlite", cpu_rate / 2);
-- ralink_clk_add("400000.ethernet", cpu_rate / 2);
-- ralink_clk_add("480000.wmac", wmac_rate);
--}
--
- void __init ralink_of_remap(void)
- {
- rt_sysc_membase = plat_of_remap_node("ralink,rt2880-sysc");
diff --git a/target/linux/ramips/patches-6.6/005-v6.5-04-mips-ralink-rt305x-remove-clock-related-code.patch b/target/linux/ramips/patches-6.6/005-v6.5-04-mips-ralink-rt305x-remove-clock-related-code.patch
deleted file mode 100644
index 12b4623b73..0000000000
--- a/target/linux/ramips/patches-6.6/005-v6.5-04-mips-ralink-rt305x-remove-clock-related-code.patch
+++ /dev/null
@@ -1,145 +0,0 @@
-From daf73c70f69386fb15960526772ef584a4efcaf2 Mon Sep 17 00:00:00 2001
-From: Sergio Paracuellos <sergio.paracuellos at gmail.com>
-Date: Mon, 19 Jun 2023 06:09:36 +0200
-Subject: [PATCH 4/9] mips: ralink: rt305x: remove clock related code
-
-A properly clock driver for ralink SoCs has been added. Hence there is no
-need to have clock related code in 'arch/mips/ralink' folder anymore.
-
-Signed-off-by: Sergio Paracuellos <sergio.paracuellos at gmail.com>
-Signed-off-by: Thomas Bogendoerfer <tsbogend at alpha.franken.de>
----
- arch/mips/include/asm/mach-ralink/rt305x.h | 21 --------
- arch/mips/ralink/rt305x.c | 78 ------------------------------
- 2 files changed, 99 deletions(-)
-
---- a/arch/mips/include/asm/mach-ralink/rt305x.h
-+++ b/arch/mips/include/asm/mach-ralink/rt305x.h
-@@ -66,26 +66,9 @@ static inline int soc_is_rt5350(void)
- #define CHIP_ID_ID_SHIFT 8
- #define CHIP_ID_REV_MASK 0xff
-
--#define RT305X_SYSCFG_CPUCLK_SHIFT 18
--#define RT305X_SYSCFG_CPUCLK_MASK 0x1
--#define RT305X_SYSCFG_CPUCLK_LOW 0x0
--#define RT305X_SYSCFG_CPUCLK_HIGH 0x1
--
- #define RT305X_SYSCFG_SRAM_CS0_MODE_SHIFT 2
--#define RT305X_SYSCFG_CPUCLK_MASK 0x1
- #define RT305X_SYSCFG_SRAM_CS0_MODE_WDT 0x1
-
--#define RT3352_SYSCFG0_CPUCLK_SHIFT 8
--#define RT3352_SYSCFG0_CPUCLK_MASK 0x1
--#define RT3352_SYSCFG0_CPUCLK_LOW 0x0
--#define RT3352_SYSCFG0_CPUCLK_HIGH 0x1
--
--#define RT5350_SYSCFG0_CPUCLK_SHIFT 8
--#define RT5350_SYSCFG0_CPUCLK_MASK 0x3
--#define RT5350_SYSCFG0_CPUCLK_360 0x0
--#define RT5350_SYSCFG0_CPUCLK_320 0x2
--#define RT5350_SYSCFG0_CPUCLK_300 0x3
--
- #define RT5350_SYSCFG0_DRAM_SIZE_SHIFT 12
- #define RT5350_SYSCFG0_DRAM_SIZE_MASK 7
- #define RT5350_SYSCFG0_DRAM_SIZE_2M 0
-@@ -116,13 +99,9 @@ static inline int soc_is_rt5350(void)
-
- #define RT3352_SYSC_REG_SYSCFG0 0x010
- #define RT3352_SYSC_REG_SYSCFG1 0x014
--#define RT3352_SYSC_REG_CLKCFG1 0x030
- #define RT3352_SYSC_REG_RSTCTRL 0x034
- #define RT3352_SYSC_REG_USB_PS 0x05c
-
--#define RT3352_CLKCFG0_XTAL_SEL BIT(20)
--#define RT3352_CLKCFG1_UPHY0_CLK_EN BIT(18)
--#define RT3352_CLKCFG1_UPHY1_CLK_EN BIT(20)
- #define RT3352_RSTCTRL_UHST BIT(22)
- #define RT3352_RSTCTRL_UDEV BIT(25)
- #define RT3352_SYSCFG1_USB0_HOST_MODE BIT(10)
---- a/arch/mips/ralink/rt305x.c
-+++ b/arch/mips/ralink/rt305x.c
-@@ -53,84 +53,6 @@ static unsigned long rt5350_get_mem_size
- return ret;
- }
-
--void __init ralink_clk_init(void)
--{
-- unsigned long cpu_rate, sys_rate, wdt_rate, uart_rate;
-- unsigned long wmac_rate = 40000000;
--
-- u32 t = rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG);
--
-- if (soc_is_rt305x() || soc_is_rt3350()) {
-- t = (t >> RT305X_SYSCFG_CPUCLK_SHIFT) &
-- RT305X_SYSCFG_CPUCLK_MASK;
-- switch (t) {
-- case RT305X_SYSCFG_CPUCLK_LOW:
-- cpu_rate = 320000000;
-- break;
-- case RT305X_SYSCFG_CPUCLK_HIGH:
-- cpu_rate = 384000000;
-- break;
-- }
-- sys_rate = uart_rate = wdt_rate = cpu_rate / 3;
-- } else if (soc_is_rt3352()) {
-- t = (t >> RT3352_SYSCFG0_CPUCLK_SHIFT) &
-- RT3352_SYSCFG0_CPUCLK_MASK;
-- switch (t) {
-- case RT3352_SYSCFG0_CPUCLK_LOW:
-- cpu_rate = 384000000;
-- break;
-- case RT3352_SYSCFG0_CPUCLK_HIGH:
-- cpu_rate = 400000000;
-- break;
-- }
-- sys_rate = wdt_rate = cpu_rate / 3;
-- uart_rate = 40000000;
-- } else if (soc_is_rt5350()) {
-- t = (t >> RT5350_SYSCFG0_CPUCLK_SHIFT) &
-- RT5350_SYSCFG0_CPUCLK_MASK;
-- switch (t) {
-- case RT5350_SYSCFG0_CPUCLK_360:
-- cpu_rate = 360000000;
-- sys_rate = cpu_rate / 3;
-- break;
-- case RT5350_SYSCFG0_CPUCLK_320:
-- cpu_rate = 320000000;
-- sys_rate = cpu_rate / 4;
-- break;
-- case RT5350_SYSCFG0_CPUCLK_300:
-- cpu_rate = 300000000;
-- sys_rate = cpu_rate / 3;
-- break;
-- default:
-- BUG();
-- }
-- uart_rate = 40000000;
-- wdt_rate = sys_rate;
-- } else {
-- BUG();
-- }
--
-- if (soc_is_rt3352() || soc_is_rt5350()) {
-- u32 val = rt_sysc_r32(RT3352_SYSC_REG_SYSCFG0);
--
-- if (!(val & RT3352_CLKCFG0_XTAL_SEL))
-- wmac_rate = 20000000;
-- }
--
-- ralink_clk_add("cpu", cpu_rate);
-- ralink_clk_add("sys", sys_rate);
-- ralink_clk_add("10000900.i2c", uart_rate);
-- ralink_clk_add("10000a00.i2s", uart_rate);
-- ralink_clk_add("10000b00.spi", sys_rate);
-- ralink_clk_add("10000b40.spi", sys_rate);
-- ralink_clk_add("10000100.timer", wdt_rate);
-- ralink_clk_add("10000120.watchdog", wdt_rate);
-- ralink_clk_add("10000500.uart", uart_rate);
-- ralink_clk_add("10000c00.uartlite", uart_rate);
-- ralink_clk_add("10100000.ethernet", sys_rate);
-- ralink_clk_add("10180000.wmac", wmac_rate);
--}
--
- void __init ralink_of_remap(void)
- {
- rt_sysc_membase = plat_of_remap_node("ralink,rt3050-sysc");
diff --git a/target/linux/ramips/patches-6.6/005-v6.5-05-mips-ralink-rt3883-remove-clock-related-code.patch b/target/linux/ramips/patches-6.6/005-v6.5-05-mips-ralink-rt3883-remove-clock-related-code.patch
deleted file mode 100644
index c13c4215f3..0000000000
--- a/target/linux/ramips/patches-6.6/005-v6.5-05-mips-ralink-rt3883-remove-clock-related-code.patch
+++ /dev/null
@@ -1,85 +0,0 @@
-From 7cd1bb48885449a9323c7ff0f10012925e93b4e1 Mon Sep 17 00:00:00 2001
-From: Sergio Paracuellos <sergio.paracuellos at gmail.com>
-Date: Mon, 19 Jun 2023 06:09:37 +0200
-Subject: [PATCH 5/9] mips: ralink: rt3883: remove clock related code
-
-A properly clock driver for ralink SoCs has been added. Hence there is no
-need to have clock related code in 'arch/mips/ralink' folder anymore.
-
-Signed-off-by: Sergio Paracuellos <sergio.paracuellos at gmail.com>
-Signed-off-by: Thomas Bogendoerfer <tsbogend at alpha.franken.de>
----
- arch/mips/include/asm/mach-ralink/rt3883.h | 8 ------
- arch/mips/ralink/rt3883.c | 44 ------------------------------
- 2 files changed, 52 deletions(-)
-
---- a/arch/mips/include/asm/mach-ralink/rt3883.h
-+++ b/arch/mips/include/asm/mach-ralink/rt3883.h
-@@ -90,14 +90,6 @@
- #define RT3883_REVID_VER_ID_SHIFT 8
- #define RT3883_REVID_ECO_ID_MASK 0x0f
-
--#define RT3883_SYSCFG0_DRAM_TYPE_DDR2 BIT(17)
--#define RT3883_SYSCFG0_CPUCLK_SHIFT 8
--#define RT3883_SYSCFG0_CPUCLK_MASK 0x3
--#define RT3883_SYSCFG0_CPUCLK_250 0x0
--#define RT3883_SYSCFG0_CPUCLK_384 0x1
--#define RT3883_SYSCFG0_CPUCLK_480 0x2
--#define RT3883_SYSCFG0_CPUCLK_500 0x3
--
- #define RT3883_SYSCFG1_USB0_HOST_MODE BIT(10)
- #define RT3883_SYSCFG1_PCIE_RC_MODE BIT(8)
- #define RT3883_SYSCFG1_PCI_HOST_MODE BIT(7)
---- a/arch/mips/ralink/rt3883.c
-+++ b/arch/mips/ralink/rt3883.c
-@@ -17,50 +17,6 @@
-
- #include "common.h"
-
--void __init ralink_clk_init(void)
--{
-- unsigned long cpu_rate, sys_rate;
-- u32 syscfg0;
-- u32 clksel;
-- u32 ddr2;
--
-- syscfg0 = rt_sysc_r32(RT3883_SYSC_REG_SYSCFG0);
-- clksel = ((syscfg0 >> RT3883_SYSCFG0_CPUCLK_SHIFT) &
-- RT3883_SYSCFG0_CPUCLK_MASK);
-- ddr2 = syscfg0 & RT3883_SYSCFG0_DRAM_TYPE_DDR2;
--
-- switch (clksel) {
-- case RT3883_SYSCFG0_CPUCLK_250:
-- cpu_rate = 250000000;
-- sys_rate = (ddr2) ? 125000000 : 83000000;
-- break;
-- case RT3883_SYSCFG0_CPUCLK_384:
-- cpu_rate = 384000000;
-- sys_rate = (ddr2) ? 128000000 : 96000000;
-- break;
-- case RT3883_SYSCFG0_CPUCLK_480:
-- cpu_rate = 480000000;
-- sys_rate = (ddr2) ? 160000000 : 120000000;
-- break;
-- case RT3883_SYSCFG0_CPUCLK_500:
-- cpu_rate = 500000000;
-- sys_rate = (ddr2) ? 166000000 : 125000000;
-- break;
-- }
--
-- ralink_clk_add("cpu", cpu_rate);
-- ralink_clk_add("10000100.timer", sys_rate);
-- ralink_clk_add("10000120.watchdog", sys_rate);
-- ralink_clk_add("10000500.uart", 40000000);
-- ralink_clk_add("10000900.i2c", 40000000);
-- ralink_clk_add("10000a00.i2s", 40000000);
-- ralink_clk_add("10000b00.spi", sys_rate);
-- ralink_clk_add("10000b40.spi", sys_rate);
-- ralink_clk_add("10000c00.uartlite", 40000000);
-- ralink_clk_add("10100000.ethernet", sys_rate);
-- ralink_clk_add("10180000.wmac", 40000000);
--}
--
- void __init ralink_of_remap(void)
- {
- rt_sysc_membase = plat_of_remap_node("ralink,rt3883-sysc");
diff --git a/target/linux/ramips/patches-6.6/005-v6.5-06-mips-ralink-mt7620-remove-clock-related-code.patch b/target/linux/ramips/patches-6.6/005-v6.5-06-mips-ralink-mt7620-remove-clock-related-code.patch
deleted file mode 100644
index 7b83cf54b4..0000000000
--- a/target/linux/ramips/patches-6.6/005-v6.5-06-mips-ralink-mt7620-remove-clock-related-code.patch
+++ /dev/null
@@ -1,327 +0,0 @@
-From 04b153abdfcbaba70ceef5a846067d4447fd0078 Mon Sep 17 00:00:00 2001
-From: Sergio Paracuellos <sergio.paracuellos at gmail.com>
-Date: Mon, 19 Jun 2023 06:09:38 +0200
-Subject: [PATCH 6/9] mips: ralink: mt7620: remove clock related code
-
-A proper clock driver for ralink SoCs has been added. Hence there is no
-need to have clock related code in 'arch/mips/ralink' folder anymore.
-Since this is the last clock related code removal, remove also remaining
-prototypes in 'common.h' header file.
-
-Signed-off-by: Sergio Paracuellos <sergio.paracuellos at gmail.com>
-Signed-off-by: Thomas Bogendoerfer <tsbogend at alpha.franken.de>
----
- arch/mips/include/asm/mach-ralink/mt7620.h | 35 -----
- arch/mips/ralink/common.h | 3 -
- arch/mips/ralink/mt7620.c | 226 -----------------------------
- 3 files changed, 264 deletions(-)
-
---- a/arch/mips/include/asm/mach-ralink/mt7620.h
-+++ b/arch/mips/include/asm/mach-ralink/mt7620.h
-@@ -19,52 +19,17 @@
- #define SYSC_REG_CHIP_REV 0x0c
- #define SYSC_REG_SYSTEM_CONFIG0 0x10
- #define SYSC_REG_SYSTEM_CONFIG1 0x14
--#define SYSC_REG_CLKCFG0 0x2c
--#define SYSC_REG_CPU_SYS_CLKCFG 0x3c
--#define SYSC_REG_CPLL_CONFIG0 0x54
--#define SYSC_REG_CPLL_CONFIG1 0x58
-
- #define MT7620_CHIP_NAME0 0x3637544d
- #define MT7620_CHIP_NAME1 0x20203032
- #define MT7628_CHIP_NAME1 0x20203832
-
--#define SYSCFG0_XTAL_FREQ_SEL BIT(6)
--
- #define CHIP_REV_PKG_MASK 0x1
- #define CHIP_REV_PKG_SHIFT 16
- #define CHIP_REV_VER_MASK 0xf
- #define CHIP_REV_VER_SHIFT 8
- #define CHIP_REV_ECO_MASK 0xf
-
--#define CLKCFG0_PERI_CLK_SEL BIT(4)
--
--#define CPU_SYS_CLKCFG_OCP_RATIO_SHIFT 16
--#define CPU_SYS_CLKCFG_OCP_RATIO_MASK 0xf
--#define CPU_SYS_CLKCFG_OCP_RATIO_1 0 /* 1:1 (Reserved) */
--#define CPU_SYS_CLKCFG_OCP_RATIO_1_5 1 /* 1:1.5 (Reserved) */
--#define CPU_SYS_CLKCFG_OCP_RATIO_2 2 /* 1:2 */
--#define CPU_SYS_CLKCFG_OCP_RATIO_2_5 3 /* 1:2.5 (Reserved) */
--#define CPU_SYS_CLKCFG_OCP_RATIO_3 4 /* 1:3 */
--#define CPU_SYS_CLKCFG_OCP_RATIO_3_5 5 /* 1:3.5 (Reserved) */
--#define CPU_SYS_CLKCFG_OCP_RATIO_4 6 /* 1:4 */
--#define CPU_SYS_CLKCFG_OCP_RATIO_5 7 /* 1:5 */
--#define CPU_SYS_CLKCFG_OCP_RATIO_10 8 /* 1:10 */
--#define CPU_SYS_CLKCFG_CPU_FDIV_SHIFT 8
--#define CPU_SYS_CLKCFG_CPU_FDIV_MASK 0x1f
--#define CPU_SYS_CLKCFG_CPU_FFRAC_SHIFT 0
--#define CPU_SYS_CLKCFG_CPU_FFRAC_MASK 0x1f
--
--#define CPLL_CFG0_SW_CFG BIT(31)
--#define CPLL_CFG0_PLL_MULT_RATIO_SHIFT 16
--#define CPLL_CFG0_PLL_MULT_RATIO_MASK 0x7
--#define CPLL_CFG0_LC_CURFCK BIT(15)
--#define CPLL_CFG0_BYPASS_REF_CLK BIT(14)
--#define CPLL_CFG0_PLL_DIV_RATIO_SHIFT 10
--#define CPLL_CFG0_PLL_DIV_RATIO_MASK 0x3
--
--#define CPLL_CFG1_CPU_AUX1 BIT(25)
--#define CPLL_CFG1_CPU_AUX0 BIT(24)
--
- #define SYSCFG0_DRAM_TYPE_MASK 0x3
- #define SYSCFG0_DRAM_TYPE_SHIFT 4
- #define SYSCFG0_DRAM_TYPE_SDRAM 0
---- a/arch/mips/ralink/common.h
-+++ b/arch/mips/ralink/common.h
-@@ -23,9 +23,6 @@ extern struct ralink_soc_info soc_info;
-
- extern void ralink_of_remap(void);
-
--extern void ralink_clk_init(void);
--extern void ralink_clk_add(const char *dev, unsigned long rate);
--
- extern void ralink_rst_init(void);
-
- extern void __init prom_soc_init(struct ralink_soc_info *soc_info);
---- a/arch/mips/ralink/mt7620.c
-+++ b/arch/mips/ralink/mt7620.c
-@@ -34,12 +34,6 @@
- #define PMU1_CFG 0x8C
- #define DIG_SW_SEL BIT(25)
-
--/* clock scaling */
--#define CLKCFG_FDIV_MASK 0x1f00
--#define CLKCFG_FDIV_USB_VAL 0x0300
--#define CLKCFG_FFRAC_MASK 0x001f
--#define CLKCFG_FFRAC_USB_VAL 0x0003
--
- /* EFUSE bits */
- #define EFUSE_MT7688 0x100000
-
-@@ -49,226 +43,6 @@
- /* does the board have sdram or ddram */
- static int dram_type;
-
--static __init u32
--mt7620_calc_rate(u32 ref_rate, u32 mul, u32 div)
--{
-- u64 t;
--
-- t = ref_rate;
-- t *= mul;
-- do_div(t, div);
--
-- return t;
--}
--
--#define MHZ(x) ((x) * 1000 * 1000)
--
--static __init unsigned long
--mt7620_get_xtal_rate(void)
--{
-- u32 reg;
--
-- reg = rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG0);
-- if (reg & SYSCFG0_XTAL_FREQ_SEL)
-- return MHZ(40);
--
-- return MHZ(20);
--}
--
--static __init unsigned long
--mt7620_get_periph_rate(unsigned long xtal_rate)
--{
-- u32 reg;
--
-- reg = rt_sysc_r32(SYSC_REG_CLKCFG0);
-- if (reg & CLKCFG0_PERI_CLK_SEL)
-- return xtal_rate;
--
-- return MHZ(40);
--}
--
--static const u32 mt7620_clk_divider[] __initconst = { 2, 3, 4, 8 };
--
--static __init unsigned long
--mt7620_get_cpu_pll_rate(unsigned long xtal_rate)
--{
-- u32 reg;
-- u32 mul;
-- u32 div;
--
-- reg = rt_sysc_r32(SYSC_REG_CPLL_CONFIG0);
-- if (reg & CPLL_CFG0_BYPASS_REF_CLK)
-- return xtal_rate;
--
-- if ((reg & CPLL_CFG0_SW_CFG) == 0)
-- return MHZ(600);
--
-- mul = (reg >> CPLL_CFG0_PLL_MULT_RATIO_SHIFT) &
-- CPLL_CFG0_PLL_MULT_RATIO_MASK;
-- mul += 24;
-- if (reg & CPLL_CFG0_LC_CURFCK)
-- mul *= 2;
--
-- div = (reg >> CPLL_CFG0_PLL_DIV_RATIO_SHIFT) &
-- CPLL_CFG0_PLL_DIV_RATIO_MASK;
--
-- WARN_ON(div >= ARRAY_SIZE(mt7620_clk_divider));
--
-- return mt7620_calc_rate(xtal_rate, mul, mt7620_clk_divider[div]);
--}
--
--static __init unsigned long
--mt7620_get_pll_rate(unsigned long xtal_rate, unsigned long cpu_pll_rate)
--{
-- u32 reg;
--
-- reg = rt_sysc_r32(SYSC_REG_CPLL_CONFIG1);
-- if (reg & CPLL_CFG1_CPU_AUX1)
-- return xtal_rate;
--
-- if (reg & CPLL_CFG1_CPU_AUX0)
-- return MHZ(480);
--
-- return cpu_pll_rate;
--}
--
--static __init unsigned long
--mt7620_get_cpu_rate(unsigned long pll_rate)
--{
-- u32 reg;
-- u32 mul;
-- u32 div;
--
-- reg = rt_sysc_r32(SYSC_REG_CPU_SYS_CLKCFG);
--
-- mul = reg & CPU_SYS_CLKCFG_CPU_FFRAC_MASK;
-- div = (reg >> CPU_SYS_CLKCFG_CPU_FDIV_SHIFT) &
-- CPU_SYS_CLKCFG_CPU_FDIV_MASK;
--
-- return mt7620_calc_rate(pll_rate, mul, div);
--}
--
--static const u32 mt7620_ocp_dividers[16] __initconst = {
-- [CPU_SYS_CLKCFG_OCP_RATIO_2] = 2,
-- [CPU_SYS_CLKCFG_OCP_RATIO_3] = 3,
-- [CPU_SYS_CLKCFG_OCP_RATIO_4] = 4,
-- [CPU_SYS_CLKCFG_OCP_RATIO_5] = 5,
-- [CPU_SYS_CLKCFG_OCP_RATIO_10] = 10,
--};
--
--static __init unsigned long
--mt7620_get_dram_rate(unsigned long pll_rate)
--{
-- if (dram_type == SYSCFG0_DRAM_TYPE_SDRAM)
-- return pll_rate / 4;
--
-- return pll_rate / 3;
--}
--
--static __init unsigned long
--mt7620_get_sys_rate(unsigned long cpu_rate)
--{
-- u32 reg;
-- u32 ocp_ratio;
-- u32 div;
--
-- reg = rt_sysc_r32(SYSC_REG_CPU_SYS_CLKCFG);
--
-- ocp_ratio = (reg >> CPU_SYS_CLKCFG_OCP_RATIO_SHIFT) &
-- CPU_SYS_CLKCFG_OCP_RATIO_MASK;
--
-- if (WARN_ON(ocp_ratio >= ARRAY_SIZE(mt7620_ocp_dividers)))
-- return cpu_rate;
--
-- div = mt7620_ocp_dividers[ocp_ratio];
-- if (WARN(!div, "invalid divider for OCP ratio %u", ocp_ratio))
-- return cpu_rate;
--
-- return cpu_rate / div;
--}
--
--void __init ralink_clk_init(void)
--{
-- unsigned long xtal_rate;
-- unsigned long cpu_pll_rate;
-- unsigned long pll_rate;
-- unsigned long cpu_rate;
-- unsigned long sys_rate;
-- unsigned long dram_rate;
-- unsigned long periph_rate;
-- unsigned long pcmi2s_rate;
--
-- xtal_rate = mt7620_get_xtal_rate();
--
--#define RFMT(label) label ":%lu.%03luMHz "
--#define RINT(x) ((x) / 1000000)
--#define RFRAC(x) (((x) / 1000) % 1000)
--
-- if (is_mt76x8()) {
-- if (xtal_rate == MHZ(40))
-- cpu_rate = MHZ(580);
-- else
-- cpu_rate = MHZ(575);
-- dram_rate = sys_rate = cpu_rate / 3;
-- periph_rate = MHZ(40);
-- pcmi2s_rate = MHZ(480);
--
-- ralink_clk_add("10000d00.uartlite", periph_rate);
-- ralink_clk_add("10000e00.uartlite", periph_rate);
-- } else {
-- cpu_pll_rate = mt7620_get_cpu_pll_rate(xtal_rate);
-- pll_rate = mt7620_get_pll_rate(xtal_rate, cpu_pll_rate);
--
-- cpu_rate = mt7620_get_cpu_rate(pll_rate);
-- dram_rate = mt7620_get_dram_rate(pll_rate);
-- sys_rate = mt7620_get_sys_rate(cpu_rate);
-- periph_rate = mt7620_get_periph_rate(xtal_rate);
-- pcmi2s_rate = periph_rate;
--
-- pr_debug(RFMT("XTAL") RFMT("CPU_PLL") RFMT("PLL"),
-- RINT(xtal_rate), RFRAC(xtal_rate),
-- RINT(cpu_pll_rate), RFRAC(cpu_pll_rate),
-- RINT(pll_rate), RFRAC(pll_rate));
--
-- ralink_clk_add("10000500.uart", periph_rate);
-- }
--
-- pr_debug(RFMT("CPU") RFMT("DRAM") RFMT("SYS") RFMT("PERIPH"),
-- RINT(cpu_rate), RFRAC(cpu_rate),
-- RINT(dram_rate), RFRAC(dram_rate),
-- RINT(sys_rate), RFRAC(sys_rate),
-- RINT(periph_rate), RFRAC(periph_rate));
--#undef RFRAC
--#undef RINT
--#undef RFMT
--
-- ralink_clk_add("cpu", cpu_rate);
-- ralink_clk_add("10000100.timer", periph_rate);
-- ralink_clk_add("10000120.watchdog", periph_rate);
-- ralink_clk_add("10000900.i2c", periph_rate);
-- ralink_clk_add("10000a00.i2s", pcmi2s_rate);
-- ralink_clk_add("10000b00.spi", sys_rate);
-- ralink_clk_add("10000b40.spi", sys_rate);
-- ralink_clk_add("10000c00.uartlite", periph_rate);
-- ralink_clk_add("10000d00.uart1", periph_rate);
-- ralink_clk_add("10000e00.uart2", periph_rate);
-- ralink_clk_add("10180000.wmac", xtal_rate);
--
-- if (IS_ENABLED(CONFIG_USB) && !is_mt76x8()) {
-- /*
-- * When the CPU goes into sleep mode, the BUS clock will be
-- * too low for USB to function properly. Adjust the busses
-- * fractional divider to fix this
-- */
-- u32 val = rt_sysc_r32(SYSC_REG_CPU_SYS_CLKCFG);
--
-- val &= ~(CLKCFG_FDIV_MASK | CLKCFG_FFRAC_MASK);
-- val |= CLKCFG_FDIV_USB_VAL | CLKCFG_FFRAC_USB_VAL;
--
-- rt_sysc_w32(val, SYSC_REG_CPU_SYS_CLKCFG);
-- }
--}
--
- void __init ralink_of_remap(void)
- {
- rt_sysc_membase = plat_of_remap_node("ralink,mt7620a-sysc");
diff --git a/target/linux/ramips/patches-6.6/005-v6.5-07-mips-ralink-remove-reset-related-code.patch b/target/linux/ramips/patches-6.6/005-v6.5-07-mips-ralink-remove-reset-related-code.patch
deleted file mode 100644
index e96a9084a6..0000000000
--- a/target/linux/ramips/patches-6.6/005-v6.5-07-mips-ralink-remove-reset-related-code.patch
+++ /dev/null
@@ -1,121 +0,0 @@
-From 201ddc05777cd8e084b508bcdda22214bfe2895e Mon Sep 17 00:00:00 2001
-From: Sergio Paracuellos <sergio.paracuellos at gmail.com>
-Date: Mon, 19 Jun 2023 06:09:39 +0200
-Subject: [PATCH 7/9] mips: ralink: remove reset related code
-
-A proper clock driver for ralink SoCs has been added. This driver is also
-a reset provider for the SoC. Hence there is no need to have reset related
-code in 'arch/mips/ralink' folder anymore. The only code that remains is
-the one related with mips_reboot_setup where a PCI reset is performed.
-We maintain this because I cannot test old ralink board with PCI to be
-sure all works if we remove also this code.
-
-Signed-off-by: Sergio Paracuellos <sergio.paracuellos at gmail.com>
-Signed-off-by: Thomas Bogendoerfer <tsbogend at alpha.franken.de>
----
- arch/mips/ralink/common.h | 2 --
- arch/mips/ralink/of.c | 4 ----
- arch/mips/ralink/reset.c | 61 -----------------------------------------------
- 3 files changed, 67 deletions(-)
-
---- a/arch/mips/ralink/common.h
-+++ b/arch/mips/ralink/common.h
-@@ -23,8 +23,6 @@ extern struct ralink_soc_info soc_info;
-
- extern void ralink_of_remap(void);
-
--extern void ralink_rst_init(void);
--
- extern void __init prom_soc_init(struct ralink_soc_info *soc_info);
-
- __iomem void *plat_of_remap_node(const char *node);
---- a/arch/mips/ralink/of.c
-+++ b/arch/mips/ralink/of.c
-@@ -81,10 +81,6 @@ static int __init plat_of_setup(void)
- {
- __dt_register_buses(soc_info.compatible, "palmbus");
-
-- /* make sure that the reset controller is setup early */
-- if (ralink_soc != MT762X_SOC_MT7621AT)
-- ralink_rst_init();
--
- return 0;
- }
-
---- a/arch/mips/ralink/reset.c
-+++ b/arch/mips/ralink/reset.c
-@@ -10,7 +10,6 @@
- #include <linux/io.h>
- #include <linux/of.h>
- #include <linux/delay.h>
--#include <linux/reset-controller.h>
-
- #include <asm/reboot.h>
-
-@@ -22,66 +21,6 @@
- #define RSTCTL_RESET_PCI BIT(26)
- #define RSTCTL_RESET_SYSTEM BIT(0)
-
--static int ralink_assert_device(struct reset_controller_dev *rcdev,
-- unsigned long id)
--{
-- u32 val;
--
-- if (id == 0)
-- return -1;
--
-- val = rt_sysc_r32(SYSC_REG_RESET_CTRL);
-- val |= BIT(id);
-- rt_sysc_w32(val, SYSC_REG_RESET_CTRL);
--
-- return 0;
--}
--
--static int ralink_deassert_device(struct reset_controller_dev *rcdev,
-- unsigned long id)
--{
-- u32 val;
--
-- if (id == 0)
-- return -1;
--
-- val = rt_sysc_r32(SYSC_REG_RESET_CTRL);
-- val &= ~BIT(id);
-- rt_sysc_w32(val, SYSC_REG_RESET_CTRL);
--
-- return 0;
--}
--
--static int ralink_reset_device(struct reset_controller_dev *rcdev,
-- unsigned long id)
--{
-- ralink_assert_device(rcdev, id);
-- return ralink_deassert_device(rcdev, id);
--}
--
--static const struct reset_control_ops reset_ops = {
-- .reset = ralink_reset_device,
-- .assert = ralink_assert_device,
-- .deassert = ralink_deassert_device,
--};
--
--static struct reset_controller_dev reset_dev = {
-- .ops = &reset_ops,
-- .owner = THIS_MODULE,
-- .nr_resets = 32,
-- .of_reset_n_cells = 1,
--};
--
--void ralink_rst_init(void)
--{
-- reset_dev.of_node = of_find_compatible_node(NULL, NULL,
-- "ralink,rt2880-reset");
-- if (!reset_dev.of_node)
-- pr_err("Failed to find reset controller node");
-- else
-- reset_controller_register(&reset_dev);
--}
--
- static void ralink_restart(char *command)
- {
- if (IS_ENABLED(CONFIG_PCI)) {
diff --git a/target/linux/ramips/patches-6.6/005-v6.5-08-mips-ralink-get-cpu-rate-from-new-driver-code.patch b/target/linux/ramips/patches-6.6/005-v6.5-08-mips-ralink-get-cpu-rate-from-new-driver-code.patch
deleted file mode 100644
index 2430c1f375..0000000000
--- a/target/linux/ramips/patches-6.6/005-v6.5-08-mips-ralink-get-cpu-rate-from-new-driver-code.patch
+++ /dev/null
@@ -1,102 +0,0 @@
-From ad38c17b0c26ae2108b50ac1eb0281a2e1ce08e9 Mon Sep 17 00:00:00 2001
-From: Sergio Paracuellos <sergio.paracuellos at gmail.com>
-Date: Mon, 19 Jun 2023 06:09:40 +0200
-Subject: [PATCH 8/9] mips: ralink: get cpu rate from new driver code
-
-At very early stage on boot, there is a need to set 'mips_hpt_frequency'.
-This timer frequency is a half of the CPU frequency. To get clocks properly
-set we need to call to 'of_clk_init()' and properly get cpu clock frequency
-afterwards. Depending on the SoC, CPU clock index and compatible differs, so
-use them to get the proper clock frm the clock provider. Hence, adapt code
-to be aligned with new clock driver.
-
-Signed-off-by: Sergio Paracuellos <sergio.paracuellos at gmail.com>
-Signed-off-by: Thomas Bogendoerfer <tsbogend at alpha.franken.de>
----
- arch/mips/ralink/clk.c | 61 ++++++++++++++++++++++++++++++++++++++++++--------
- 1 file changed, 52 insertions(+), 9 deletions(-)
-
---- a/arch/mips/ralink/clk.c
-+++ b/arch/mips/ralink/clk.c
-@@ -11,29 +11,72 @@
- #include <linux/clkdev.h>
- #include <linux/clk.h>
- #include <linux/clk-provider.h>
-+#include <asm/mach-ralink/ralink_regs.h>
-
- #include <asm/time.h>
-
- #include "common.h"
-
--void ralink_clk_add(const char *dev, unsigned long rate)
-+static const char *clk_cpu(int *idx)
- {
-- struct clk *clk = clk_register_fixed_rate(NULL, dev, NULL, 0, rate);
--
-- if (!clk)
-- panic("failed to add clock");
--
-- clkdev_create(clk, NULL, "%s", dev);
-+ switch (ralink_soc) {
-+ case RT2880_SOC:
-+ *idx = 0;
-+ return "ralink,rt2880-sysc";
-+ case RT3883_SOC:
-+ *idx = 0;
-+ return "ralink,rt3883-sysc";
-+ case RT305X_SOC_RT3050:
-+ *idx = 0;
-+ return "ralink,rt3050-sysc";
-+ case RT305X_SOC_RT3052:
-+ *idx = 0;
-+ return "ralink,rt3052-sysc";
-+ case RT305X_SOC_RT3350:
-+ *idx = 1;
-+ return "ralink,rt3350-sysc";
-+ case RT305X_SOC_RT3352:
-+ *idx = 1;
-+ return "ralink,rt3352-sysc";
-+ case RT305X_SOC_RT5350:
-+ *idx = 1;
-+ return "ralink,rt5350-sysc";
-+ case MT762X_SOC_MT7620A:
-+ *idx = 2;
-+ return "ralink,mt7620-sysc";
-+ case MT762X_SOC_MT7620N:
-+ *idx = 2;
-+ return "ralink,mt7620-sysc";
-+ case MT762X_SOC_MT7628AN:
-+ *idx = 1;
-+ return "ralink,mt7628-sysc";
-+ case MT762X_SOC_MT7688:
-+ *idx = 1;
-+ return "ralink,mt7688-sysc";
-+ default:
-+ *idx = -1;
-+ return "invalid";
-+ }
- }
-
- void __init plat_time_init(void)
- {
-+ struct of_phandle_args clkspec;
-+ const char *compatible;
- struct clk *clk;
-+ int cpu_clk_idx;
-
- ralink_of_remap();
-
-- ralink_clk_init();
-- clk = clk_get_sys("cpu", NULL);
-+ compatible = clk_cpu(&cpu_clk_idx);
-+ if (cpu_clk_idx == -1)
-+ panic("unable to get CPU clock index");
-+
-+ of_clk_init(NULL);
-+ clkspec.np = of_find_compatible_node(NULL, NULL, compatible);
-+ clkspec.args_count = 1;
-+ clkspec.args[0] = cpu_clk_idx;
-+ clk = of_clk_get_from_provider(&clkspec);
- if (IS_ERR(clk))
- panic("unable to get CPU clock, err=%ld", PTR_ERR(clk));
- pr_info("CPU Clock: %ldMHz\n", clk_get_rate(clk) / 1000000);
diff --git a/target/linux/ramips/patches-6.6/005-v6.5-09-MAINTAINERS-add-Mediatek-MTMIPS-Clock-maintainer.patch b/target/linux/ramips/patches-6.6/005-v6.5-09-MAINTAINERS-add-Mediatek-MTMIPS-Clock-maintainer.patch
deleted file mode 100644
index f7ab99bc76..0000000000
--- a/target/linux/ramips/patches-6.6/005-v6.5-09-MAINTAINERS-add-Mediatek-MTMIPS-Clock-maintainer.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From fc15a7193a4d37d79e873fa06cc423180ddd2ddf Mon Sep 17 00:00:00 2001
-From: Sergio Paracuellos <sergio.paracuellos at gmail.com>
-Date: Mon, 19 Jun 2023 06:09:41 +0200
-Subject: [PATCH 9/9] MAINTAINERS: add Mediatek MTMIPS Clock maintainer
-
-Adding myself as maintainer for Mediatek MTMIPS clock driver.
-
-Signed-off-by: Sergio Paracuellos <sergio.paracuellos at gmail.com>
-Signed-off-by: Thomas Bogendoerfer <tsbogend at alpha.franken.de>
----
- MAINTAINERS | 6 ++++++
- 1 file changed, 6 insertions(+)
-
---- a/MAINTAINERS
-+++ b/MAINTAINERS
-@@ -13021,6 +13021,12 @@ S: Maintained
- F: Documentation/devicetree/bindings/clock/mediatek,mt7621-sysc.yaml
- F: drivers/clk/ralink/clk-mt7621.c
-
-+MEDIATEK MTMIPS CLOCK DRIVER
-+M: Sergio Paracuellos <sergio.paracuellos at gmail.com>
-+S: Maintained
-+F: Documentation/devicetree/bindings/clock/mediatek,mtmips-sysc.yaml
-+F: drivers/clk/ralink/clk-mtmips.c
-+
- MEDIATEK MT7621/28/88 I2C DRIVER
- M: Stefan Roese <sr at denx.de>
- L: linux-i2c at vger.kernel.org
diff --git a/target/linux/ramips/patches-6.6/006-v6.5-mips-ralink-introduce-commonly-used-remap-node-funct.patch b/target/linux/ramips/patches-6.6/006-v6.5-mips-ralink-introduce-commonly-used-remap-node-funct.patch
deleted file mode 100644
index f5c148101f..0000000000
--- a/target/linux/ramips/patches-6.6/006-v6.5-mips-ralink-introduce-commonly-used-remap-node-funct.patch
+++ /dev/null
@@ -1,191 +0,0 @@
-From fd99ac5055d4705e91c73d1adba18bc71c8511a8 Mon Sep 17 00:00:00 2001
-From: Shiji Yang <yangshiji66 at outlook.com>
-Date: Tue, 20 Jun 2023 19:44:32 +0800
-Subject: [PATCH] mips: ralink: introduce commonly used remap node function
-
-The ralink_of_remap() function is repeated several times on SoC specific
-source files. They have the same structure, but just differ in compatible
-strings. In order to make commonly use of these codes, this patch
-introduces a newly designed mtmips_of_remap_node() function to match and
-remap all supported system controller and memory controller nodes.
-
-Build and run tested on MT7620 and MT7628.
-
-Signed-off-by: Shiji Yang <yangshiji66 at outlook.com>
-Reviewed-by: Sergio Paracuellos <sergio.paracuellos at gmail.com>
-Signed-off-by: Thomas Bogendoerfer <tsbogend at alpha.franken.de>
----
- arch/mips/ralink/common.h | 2 --
- arch/mips/ralink/mt7620.c | 9 ---------
- arch/mips/ralink/mt7621.c | 9 ---------
- arch/mips/ralink/of.c | 42 +++++++++++++++++++++++++++++++++++-------
- arch/mips/ralink/rt288x.c | 9 ---------
- arch/mips/ralink/rt305x.c | 9 ---------
- arch/mips/ralink/rt3883.c | 9 ---------
- 7 files changed, 35 insertions(+), 54 deletions(-)
-
---- a/arch/mips/ralink/common.h
-+++ b/arch/mips/ralink/common.h
-@@ -25,6 +25,4 @@ extern void ralink_of_remap(void);
-
- extern void __init prom_soc_init(struct ralink_soc_info *soc_info);
-
--__iomem void *plat_of_remap_node(const char *node);
--
- #endif /* _RALINK_COMMON_H__ */
---- a/arch/mips/ralink/mt7620.c
-+++ b/arch/mips/ralink/mt7620.c
-@@ -43,15 +43,6 @@
- /* does the board have sdram or ddram */
- static int dram_type;
-
--void __init ralink_of_remap(void)
--{
-- rt_sysc_membase = plat_of_remap_node("ralink,mt7620a-sysc");
-- rt_memc_membase = plat_of_remap_node("ralink,mt7620a-memc");
--
-- if (!rt_sysc_membase || !rt_memc_membase)
-- panic("Failed to remap core resources");
--}
--
- static __init void
- mt7620_dram_init(struct ralink_soc_info *soc_info)
- {
---- a/arch/mips/ralink/mt7621.c
-+++ b/arch/mips/ralink/mt7621.c
-@@ -89,15 +89,6 @@ static void __init mt7621_memory_detect(
- memblock_add(MT7621_HIGHMEM_BASE, MT7621_HIGHMEM_SIZE);
- }
-
--void __init ralink_of_remap(void)
--{
-- rt_sysc_membase = plat_of_remap_node("mediatek,mt7621-sysc");
-- rt_memc_membase = plat_of_remap_node("mediatek,mt7621-memc");
--
-- if (!rt_sysc_membase || !rt_memc_membase)
-- panic("Failed to remap core resources");
--}
--
- static unsigned int __init mt7621_get_soc_name0(void)
- {
- return __raw_readl(MT7621_SYSC_BASE + SYSC_REG_CHIP_NAME0);
---- a/arch/mips/ralink/of.c
-+++ b/arch/mips/ralink/of.c
-@@ -29,28 +29,56 @@ __iomem void *rt_sysc_membase;
- __iomem void *rt_memc_membase;
- EXPORT_SYMBOL_GPL(rt_sysc_membase);
-
--__iomem void *plat_of_remap_node(const char *node)
-+static const struct of_device_id mtmips_memc_match[] = {
-+ { .compatible = "mediatek,mt7621-memc" },
-+ { .compatible = "ralink,mt7620a-memc" },
-+ { .compatible = "ralink,rt2880-memc" },
-+ { .compatible = "ralink,rt3050-memc" },
-+ { .compatible = "ralink,rt3883-memc" },
-+ {}
-+};
-+
-+static const struct of_device_id mtmips_sysc_match[] = {
-+ { .compatible = "mediatek,mt7621-sysc" },
-+ { .compatible = "ralink,mt7620a-sysc" },
-+ { .compatible = "ralink,rt2880-sysc" },
-+ { .compatible = "ralink,rt3050-sysc" },
-+ { .compatible = "ralink,rt3883-sysc" },
-+ {}
-+};
-+
-+static __iomem void *
-+mtmips_of_remap_node(const struct of_device_id *match, const char *type)
- {
- struct resource res;
- struct device_node *np;
-
-- np = of_find_compatible_node(NULL, NULL, node);
-+ np = of_find_matching_node(NULL, match);
- if (!np)
-- panic("Failed to find %s node", node);
-+ panic("Failed to find %s controller node", type);
-
- if (of_address_to_resource(np, 0, &res))
-- panic("Failed to get resource for %s", node);
--
-- of_node_put(np);
-+ panic("Failed to get resource for %s node", np->name);
-
- if (!request_mem_region(res.start,
- resource_size(&res),
- res.name))
-- panic("Failed to request resources for %s", node);
-+ panic("Failed to request resources for %s node", np->name);
-+
-+ of_node_put(np);
-
- return ioremap(res.start, resource_size(&res));
- }
-
-+void __init ralink_of_remap(void)
-+{
-+ rt_sysc_membase = mtmips_of_remap_node(mtmips_sysc_match, "system");
-+ rt_memc_membase = mtmips_of_remap_node(mtmips_memc_match, "memory");
-+
-+ if (!rt_sysc_membase || !rt_memc_membase)
-+ panic("Failed to remap core resources");
-+}
-+
- void __init plat_mem_setup(void)
- {
- void *dtb;
---- a/arch/mips/ralink/rt288x.c
-+++ b/arch/mips/ralink/rt288x.c
-@@ -17,15 +17,6 @@
-
- #include "common.h"
-
--void __init ralink_of_remap(void)
--{
-- rt_sysc_membase = plat_of_remap_node("ralink,rt2880-sysc");
-- rt_memc_membase = plat_of_remap_node("ralink,rt2880-memc");
--
-- if (!rt_sysc_membase || !rt_memc_membase)
-- panic("Failed to remap core resources");
--}
--
- void __init prom_soc_init(struct ralink_soc_info *soc_info)
- {
- void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT2880_SYSC_BASE);
---- a/arch/mips/ralink/rt305x.c
-+++ b/arch/mips/ralink/rt305x.c
-@@ -53,15 +53,6 @@ static unsigned long rt5350_get_mem_size
- return ret;
- }
-
--void __init ralink_of_remap(void)
--{
-- rt_sysc_membase = plat_of_remap_node("ralink,rt3050-sysc");
-- rt_memc_membase = plat_of_remap_node("ralink,rt3050-memc");
--
-- if (!rt_sysc_membase || !rt_memc_membase)
-- panic("Failed to remap core resources");
--}
--
- void __init prom_soc_init(struct ralink_soc_info *soc_info)
- {
- void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT305X_SYSC_BASE);
---- a/arch/mips/ralink/rt3883.c
-+++ b/arch/mips/ralink/rt3883.c
-@@ -17,15 +17,6 @@
-
- #include "common.h"
-
--void __init ralink_of_remap(void)
--{
-- rt_sysc_membase = plat_of_remap_node("ralink,rt3883-sysc");
-- rt_memc_membase = plat_of_remap_node("ralink,rt3883-memc");
--
-- if (!rt_sysc_membase || !rt_memc_membase)
-- panic("Failed to remap core resources");
--}
--
- void __init prom_soc_init(struct ralink_soc_info *soc_info)
- {
- void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT3883_SYSC_BASE);
diff --git a/target/linux/ramips/patches-6.6/007-v6.5-clk-ralink-mtmips-Fix-uninitialized-use-of-ret-in-mt.patch b/target/linux/ramips/patches-6.6/007-v6.5-clk-ralink-mtmips-Fix-uninitialized-use-of-ret-in-mt.patch
deleted file mode 100644
index c0c2a6e204..0000000000
--- a/target/linux/ramips/patches-6.6/007-v6.5-clk-ralink-mtmips-Fix-uninitialized-use-of-ret-in-mt.patch
+++ /dev/null
@@ -1,56 +0,0 @@
-From 6e68dae946e3a0333fbde5487ce163142ca10ae0 Mon Sep 17 00:00:00 2001
-From: Nathan Chancellor <nathan at kernel.org>
-Date: Thu, 22 Jun 2023 15:56:19 +0000
-Subject: clk: ralink: mtmips: Fix uninitialized use of ret in
- mtmips_register_{fixed,factor}_clocks()
-
-Clang warns:
-
- drivers/clk/ralink/clk-mtmips.c:309:9: error: variable 'ret' is uninitialized when used here [-Werror,-Wuninitialized]
- 309 | return ret;
- | ^~~
- drivers/clk/ralink/clk-mtmips.c:285:9: note: initialize the variable 'ret' to silence this warning
- 285 | int ret, i;
- | ^
- | = 0
- drivers/clk/ralink/clk-mtmips.c:359:9: error: variable 'ret' is uninitialized when used here [-Werror,-Wuninitialized]
- 359 | return ret;
- | ^~~
- drivers/clk/ralink/clk-mtmips.c:335:9: note: initialize the variable 'ret' to silence this warning
- 335 | int ret, i;
- | ^
- | = 0
- 2 errors generated.
-
-Set ret to the return value of clk_hw_register_fixed_rate() using the
-PTR_ERR() macro, which ensures ret is not used uninitialized, clearing
-up the warning.
-
-Fixes: 6f3b15586eef ("clk: ralink: add clock and reset driver for MTMIPS SoCs")
-Closes: https://github.com/ClangBuiltLinux/linux/issues/1879
-Signed-off-by: Nathan Chancellor <nathan at kernel.org>
-Reviewed-by: Nick Desaulniers <ndesaulniers at google.com>
-Acked-by: Sergio Paracuellos <sergio.paracuellos at gmail.com>
-Signed-off-by: Thomas Bogendoerfer <tsbogend at alpha.franken.de>
----
- drivers/clk/ralink/clk-mtmips.c | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/drivers/clk/ralink/clk-mtmips.c
-+++ b/drivers/clk/ralink/clk-mtmips.c
-@@ -292,6 +292,7 @@ static int mtmips_register_fixed_clocks(
- sclk->parent, 0,
- sclk->rate);
- if (IS_ERR(sclk->hw)) {
-+ ret = PTR_ERR(sclk->hw);
- pr_err("Couldn't register fixed clock %d\n", idx);
- goto err_clk_unreg;
- }
-@@ -342,6 +343,7 @@ static int mtmips_register_factor_clocks
- sclk->parent, sclk->flags,
- sclk->mult, sclk->div);
- if (IS_ERR(sclk->hw)) {
-+ ret = PTR_ERR(sclk->hw);
- pr_err("Couldn't register factor clock %d\n", idx);
- goto err_clk_unreg;
- }
diff --git a/target/linux/ramips/patches-6.6/008-v6.5-mips-ralink-match-all-supported-system-controller-co.patch b/target/linux/ramips/patches-6.6/008-v6.5-mips-ralink-match-all-supported-system-controller-co.patch
deleted file mode 100644
index 6940a2b4b9..0000000000
--- a/target/linux/ramips/patches-6.6/008-v6.5-mips-ralink-match-all-supported-system-controller-co.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-From 670f77f76f650b1b341d31d009cc2fb03a4d1fcf Mon Sep 17 00:00:00 2001
-From: Shiji Yang <yangshiji66 at outlook.com>
-Date: Fri, 23 Jun 2023 08:17:48 +0800
-Subject: mips: ralink: match all supported system controller compatible
- strings
-
-Recently, A new clock and reset controller driver has been introduced to
-the ralink mips target[1]. It provides proper system control and adds more
-SoC specific compatible strings. In order to better initialize CPUs, this
-patch removes the outdated "ralink,mt7620a-sysc" and add all dt-binding
-documented compatible strings to the system controller match table.
-
-[1] https://lore.kernel.org/all/20230619040941.1340372-1-sergio.paracuellos@gmail.com/
-
-Signed-off-by: Shiji Yang <yangshiji66 at outlook.com>
-Reviewed-by: Sergio Paracuellos <sergio.paracuellos at gmail.com>
-Signed-off-by: Thomas Bogendoerfer <tsbogend at alpha.franken.de>
----
- arch/mips/ralink/of.c | 7 ++++++-
- 1 file changed, 6 insertions(+), 1 deletion(-)
-
---- a/arch/mips/ralink/of.c
-+++ b/arch/mips/ralink/of.c
-@@ -40,10 +40,15 @@ static const struct of_device_id mtmips_
-
- static const struct of_device_id mtmips_sysc_match[] = {
- { .compatible = "mediatek,mt7621-sysc" },
-- { .compatible = "ralink,mt7620a-sysc" },
-+ { .compatible = "ralink,mt7620-sysc" },
-+ { .compatible = "ralink,mt7628-sysc" },
-+ { .compatible = "ralink,mt7688-sysc" },
- { .compatible = "ralink,rt2880-sysc" },
- { .compatible = "ralink,rt3050-sysc" },
-+ { .compatible = "ralink,rt3052-sysc" },
-+ { .compatible = "ralink,rt3352-sysc" },
- { .compatible = "ralink,rt3883-sysc" },
-+ { .compatible = "ralink,rt5350-sysc" },
- {}
- };
-
diff --git a/target/linux/ramips/patches-6.6/009-v6.3-01-watchdog-mt7621-wdt-avoid-static-global-declarations.patch b/target/linux/ramips/patches-6.6/009-v6.3-01-watchdog-mt7621-wdt-avoid-static-global-declarations.patch
deleted file mode 100644
index e06d5621e1..0000000000
--- a/target/linux/ramips/patches-6.6/009-v6.3-01-watchdog-mt7621-wdt-avoid-static-global-declarations.patch
+++ /dev/null
@@ -1,213 +0,0 @@
-From 783c7cb4659b53b5e1b809dac5e8cdf250145919 Mon Sep 17 00:00:00 2001
-From: Sergio Paracuellos <sergio.paracuellos at gmail.com>
-Date: Tue, 14 Feb 2023 11:39:35 +0100
-Subject: [PATCH 1/2] watchdog: mt7621-wdt: avoid static global declarations
-
-Instead of using static global definitions in driver code, refactor code
-introducing a new watchdog driver data structure and use it along the
-code.
-
-Reviewed-by: Guenter Roeck <linux at roeck-us.net>
-Signed-off-by: Sergio Paracuellos <sergio.paracuellos at gmail.com>
-Link: https://lore.kernel.org/r/20230214103936.1061078-5-sergio.paracuellos@gmail.com
-[groeck: unsigned -> unsigned int]
-Signed-off-by: Guenter Roeck <linux at roeck-us.net>
-Signed-off-by: Wim Van Sebroeck <wim at linux-watchdog.org>
----
- drivers/watchdog/mt7621_wdt.c | 102 +++++++++++++++++++++++++++---------------
- 1 file changed, 65 insertions(+), 37 deletions(-)
-
---- a/drivers/watchdog/mt7621_wdt.c
-+++ b/drivers/watchdog/mt7621_wdt.c
-@@ -31,8 +31,11 @@
- #define TMR1CTL_RESTART BIT(9)
- #define TMR1CTL_PRESCALE_SHIFT 16
-
--static void __iomem *mt7621_wdt_base;
--static struct reset_control *mt7621_wdt_reset;
-+struct mt7621_wdt_data {
-+ void __iomem *base;
-+ struct reset_control *rst;
-+ struct watchdog_device wdt;
-+};
-
- static bool nowayout = WATCHDOG_NOWAYOUT;
- module_param(nowayout, bool, 0);
-@@ -40,27 +43,31 @@ MODULE_PARM_DESC(nowayout,
- "Watchdog cannot be stopped once started (default="
- __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
-
--static inline void rt_wdt_w32(unsigned reg, u32 val)
-+static inline void rt_wdt_w32(void __iomem *base, unsigned int reg, u32 val)
- {
-- iowrite32(val, mt7621_wdt_base + reg);
-+ iowrite32(val, base + reg);
- }
-
--static inline u32 rt_wdt_r32(unsigned reg)
-+static inline u32 rt_wdt_r32(void __iomem *base, unsigned int reg)
- {
-- return ioread32(mt7621_wdt_base + reg);
-+ return ioread32(base + reg);
- }
-
- static int mt7621_wdt_ping(struct watchdog_device *w)
- {
-- rt_wdt_w32(TIMER_REG_TMRSTAT, TMR1CTL_RESTART);
-+ struct mt7621_wdt_data *drvdata = watchdog_get_drvdata(w);
-+
-+ rt_wdt_w32(drvdata->base, TIMER_REG_TMRSTAT, TMR1CTL_RESTART);
-
- return 0;
- }
-
- static int mt7621_wdt_set_timeout(struct watchdog_device *w, unsigned int t)
- {
-+ struct mt7621_wdt_data *drvdata = watchdog_get_drvdata(w);
-+
- w->timeout = t;
-- rt_wdt_w32(TIMER_REG_TMR1LOAD, t * 1000);
-+ rt_wdt_w32(drvdata->base, TIMER_REG_TMR1LOAD, t * 1000);
- mt7621_wdt_ping(w);
-
- return 0;
-@@ -68,29 +75,31 @@ static int mt7621_wdt_set_timeout(struct
-
- static int mt7621_wdt_start(struct watchdog_device *w)
- {
-+ struct mt7621_wdt_data *drvdata = watchdog_get_drvdata(w);
- u32 t;
-
- /* set the prescaler to 1ms == 1000us */
-- rt_wdt_w32(TIMER_REG_TMR1CTL, 1000 << TMR1CTL_PRESCALE_SHIFT);
-+ rt_wdt_w32(drvdata->base, TIMER_REG_TMR1CTL, 1000 << TMR1CTL_PRESCALE_SHIFT);
-
- mt7621_wdt_set_timeout(w, w->timeout);
-
-- t = rt_wdt_r32(TIMER_REG_TMR1CTL);
-+ t = rt_wdt_r32(drvdata->base, TIMER_REG_TMR1CTL);
- t |= TMR1CTL_ENABLE;
-- rt_wdt_w32(TIMER_REG_TMR1CTL, t);
-+ rt_wdt_w32(drvdata->base, TIMER_REG_TMR1CTL, t);
-
- return 0;
- }
-
- static int mt7621_wdt_stop(struct watchdog_device *w)
- {
-+ struct mt7621_wdt_data *drvdata = watchdog_get_drvdata(w);
- u32 t;
-
- mt7621_wdt_ping(w);
-
-- t = rt_wdt_r32(TIMER_REG_TMR1CTL);
-+ t = rt_wdt_r32(drvdata->base, TIMER_REG_TMR1CTL);
- t &= ~TMR1CTL_ENABLE;
-- rt_wdt_w32(TIMER_REG_TMR1CTL, t);
-+ rt_wdt_w32(drvdata->base, TIMER_REG_TMR1CTL, t);
-
- return 0;
- }
-@@ -105,7 +114,9 @@ static int mt7621_wdt_bootcause(void)
-
- static int mt7621_wdt_is_running(struct watchdog_device *w)
- {
-- return !!(rt_wdt_r32(TIMER_REG_TMR1CTL) & TMR1CTL_ENABLE);
-+ struct mt7621_wdt_data *drvdata = watchdog_get_drvdata(w);
-+
-+ return !!(rt_wdt_r32(drvdata->base, TIMER_REG_TMR1CTL) & TMR1CTL_ENABLE);
- }
-
- static const struct watchdog_info mt7621_wdt_info = {
-@@ -121,30 +132,39 @@ static const struct watchdog_ops mt7621_
- .set_timeout = mt7621_wdt_set_timeout,
- };
-
--static struct watchdog_device mt7621_wdt_dev = {
-- .info = &mt7621_wdt_info,
-- .ops = &mt7621_wdt_ops,
-- .min_timeout = 1,
-- .max_timeout = 0xfffful / 1000,
--};
--
- static int mt7621_wdt_probe(struct platform_device *pdev)
- {
- struct device *dev = &pdev->dev;
-- mt7621_wdt_base = devm_platform_ioremap_resource(pdev, 0);
-- if (IS_ERR(mt7621_wdt_base))
-- return PTR_ERR(mt7621_wdt_base);
--
-- mt7621_wdt_reset = devm_reset_control_get_exclusive(dev, NULL);
-- if (!IS_ERR(mt7621_wdt_reset))
-- reset_control_deassert(mt7621_wdt_reset);
--
-- mt7621_wdt_dev.bootstatus = mt7621_wdt_bootcause();
--
-- watchdog_init_timeout(&mt7621_wdt_dev, mt7621_wdt_dev.max_timeout,
-- dev);
-- watchdog_set_nowayout(&mt7621_wdt_dev, nowayout);
-- if (mt7621_wdt_is_running(&mt7621_wdt_dev)) {
-+ struct watchdog_device *mt7621_wdt;
-+ struct mt7621_wdt_data *drvdata;
-+ int err;
-+
-+ drvdata = devm_kzalloc(dev, sizeof(*drvdata), GFP_KERNEL);
-+ if (!drvdata)
-+ return -ENOMEM;
-+
-+ drvdata->base = devm_platform_ioremap_resource(pdev, 0);
-+ if (IS_ERR(drvdata->base))
-+ return PTR_ERR(drvdata->base);
-+
-+ drvdata->rst = devm_reset_control_get_exclusive(dev, NULL);
-+ if (!IS_ERR(drvdata->rst))
-+ reset_control_deassert(drvdata->rst);
-+
-+ mt7621_wdt = &drvdata->wdt;
-+ mt7621_wdt->info = &mt7621_wdt_info;
-+ mt7621_wdt->ops = &mt7621_wdt_ops;
-+ mt7621_wdt->min_timeout = 1;
-+ mt7621_wdt->max_timeout = 0xfffful / 1000;
-+ mt7621_wdt->parent = dev;
-+
-+ mt7621_wdt->bootstatus = mt7621_wdt_bootcause();
-+
-+ watchdog_init_timeout(mt7621_wdt, mt7621_wdt->max_timeout, dev);
-+ watchdog_set_nowayout(mt7621_wdt, nowayout);
-+ watchdog_set_drvdata(mt7621_wdt, drvdata);
-+
-+ if (mt7621_wdt_is_running(mt7621_wdt)) {
- /*
- * Make sure to apply timeout from watchdog core, taking
- * the prescaler of this driver here into account (the
-@@ -154,17 +174,25 @@ static int mt7621_wdt_probe(struct platf
- * we first disable the watchdog, set the new prescaler
- * and timeout, and then re-enable the watchdog.
- */
-- mt7621_wdt_stop(&mt7621_wdt_dev);
-- mt7621_wdt_start(&mt7621_wdt_dev);
-- set_bit(WDOG_HW_RUNNING, &mt7621_wdt_dev.status);
-+ mt7621_wdt_stop(mt7621_wdt);
-+ mt7621_wdt_start(mt7621_wdt);
-+ set_bit(WDOG_HW_RUNNING, &mt7621_wdt->status);
- }
-
-- return devm_watchdog_register_device(dev, &mt7621_wdt_dev);
-+ err = devm_watchdog_register_device(dev, &drvdata->wdt);
-+ if (err)
-+ return err;
-+
-+ platform_set_drvdata(pdev, drvdata);
-+
-+ return 0;
- }
-
- static void mt7621_wdt_shutdown(struct platform_device *pdev)
- {
-- mt7621_wdt_stop(&mt7621_wdt_dev);
-+ struct mt7621_wdt_data *drvdata = platform_get_drvdata(pdev);
-+
-+ mt7621_wdt_stop(&drvdata->wdt);
- }
-
- static const struct of_device_id mt7621_wdt_match[] = {
diff --git a/target/linux/ramips/patches-6.6/009-v6.3-02-watchdog-mt7621-wdt-avoid-ralink-architecture-depend.patch b/target/linux/ramips/patches-6.6/009-v6.3-02-watchdog-mt7621-wdt-avoid-ralink-architecture-depend.patch
deleted file mode 100644
index 7e4e45df13..0000000000
--- a/target/linux/ramips/patches-6.6/009-v6.3-02-watchdog-mt7621-wdt-avoid-ralink-architecture-depend.patch
+++ /dev/null
@@ -1,104 +0,0 @@
-From ff8ec4ac39ad413b580d611dbf68e1d8a82eba56 Mon Sep 17 00:00:00 2001
-From: Sergio Paracuellos <sergio.paracuellos at gmail.com>
-Date: Tue, 14 Feb 2023 11:39:36 +0100
-Subject: [PATCH 2/2] watchdog: mt7621-wdt: avoid ralink architecture dependent code
-
-MT7621 SoC has a system controller node. Watchdog need to access to reset
-status register. Ralink architecture and related driver are old and from
-the beggining they are using some architecture dependent operations for
-accessing this shared registers through 'asm/mach-ralink/ralink_regs.h'
-header file. However this is not ideal from a driver perspective which can
-just access to the system controller registers in an arch independent way
-using regmap syscon APIs. Update Kconfig accordingly to select new added
-dependencies and allow driver to be compile tested.
-
-Signed-off-by: Sergio Paracuellos <sergio.paracuellos at gmail.com>
-Reviewed-by: Guenter Roeck <linux at roeck-us.net>
-Link: https://lore.kernel.org/r/20230214103936.1061078-6-sergio.paracuellos@gmail.com
-Signed-off-by: Guenter Roeck <linux at roeck-us.net>
-Signed-off-by: Wim Van Sebroeck <wim at linux-watchdog.org>
----
- drivers/watchdog/Kconfig | 4 +++-
- drivers/watchdog/mt7621_wdt.c | 22 +++++++++++++++++-----
- 2 files changed, 20 insertions(+), 6 deletions(-)
-
---- a/drivers/watchdog/Kconfig
-+++ b/drivers/watchdog/Kconfig
-@@ -1865,7 +1865,9 @@ config GXP_WATCHDOG
- config MT7621_WDT
- tristate "Mediatek SoC watchdog"
- select WATCHDOG_CORE
-- depends on SOC_MT7620 || SOC_MT7621
-+ select REGMAP_MMIO
-+ select MFD_SYSCON
-+ depends on SOC_MT7620 || SOC_MT7621 || COMPILE_TEST
- help
- Hardware driver for the Mediatek/Ralink MT7621/8 SoC Watchdog Timer.
-
---- a/drivers/watchdog/mt7621_wdt.c
-+++ b/drivers/watchdog/mt7621_wdt.c
-@@ -15,8 +15,8 @@
- #include <linux/moduleparam.h>
- #include <linux/platform_device.h>
- #include <linux/mod_devicetable.h>
--
--#include <asm/mach-ralink/ralink_regs.h>
-+#include <linux/mfd/syscon.h>
-+#include <linux/regmap.h>
-
- #define SYSC_RSTSTAT 0x38
- #define WDT_RST_CAUSE BIT(1)
-@@ -34,6 +34,7 @@
- struct mt7621_wdt_data {
- void __iomem *base;
- struct reset_control *rst;
-+ struct regmap *sysc;
- struct watchdog_device wdt;
- };
-
-@@ -104,9 +105,12 @@ static int mt7621_wdt_stop(struct watchd
- return 0;
- }
-
--static int mt7621_wdt_bootcause(void)
-+static int mt7621_wdt_bootcause(struct mt7621_wdt_data *d)
- {
-- if (rt_sysc_r32(SYSC_RSTSTAT) & WDT_RST_CAUSE)
-+ u32 val;
-+
-+ regmap_read(d->sysc, SYSC_RSTSTAT, &val);
-+ if (val & WDT_RST_CAUSE)
- return WDIOF_CARDRESET;
-
- return 0;
-@@ -134,6 +138,7 @@ static const struct watchdog_ops mt7621_
-
- static int mt7621_wdt_probe(struct platform_device *pdev)
- {
-+ struct device_node *np = pdev->dev.of_node;
- struct device *dev = &pdev->dev;
- struct watchdog_device *mt7621_wdt;
- struct mt7621_wdt_data *drvdata;
-@@ -143,6 +148,13 @@ static int mt7621_wdt_probe(struct platf
- if (!drvdata)
- return -ENOMEM;
-
-+ drvdata->sysc = syscon_regmap_lookup_by_phandle(np, "mediatek,sysctl");
-+ if (IS_ERR(drvdata->sysc)) {
-+ drvdata->sysc = syscon_regmap_lookup_by_compatible("mediatek,mt7621-sysc");
-+ if (IS_ERR(drvdata->sysc))
-+ return PTR_ERR(drvdata->sysc);
-+ }
-+
- drvdata->base = devm_platform_ioremap_resource(pdev, 0);
- if (IS_ERR(drvdata->base))
- return PTR_ERR(drvdata->base);
-@@ -158,7 +170,7 @@ static int mt7621_wdt_probe(struct platf
- mt7621_wdt->max_timeout = 0xfffful / 1000;
- mt7621_wdt->parent = dev;
-
-- mt7621_wdt->bootstatus = mt7621_wdt_bootcause();
-+ mt7621_wdt->bootstatus = mt7621_wdt_bootcause(drvdata);
-
- watchdog_init_timeout(mt7621_wdt, mt7621_wdt->max_timeout, dev);
- watchdog_set_nowayout(mt7621_wdt, nowayout);
diff --git a/target/linux/ramips/patches-6.6/010-v6.5-01-mips-pci-mt7620-do-not-print-NFTS-register-value-as-.patch b/target/linux/ramips/patches-6.6/010-v6.5-01-mips-pci-mt7620-do-not-print-NFTS-register-value-as-.patch
deleted file mode 100644
index 704e861b82..0000000000
--- a/target/linux/ramips/patches-6.6/010-v6.5-01-mips-pci-mt7620-do-not-print-NFTS-register-value-as-.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From 9f9a035e6156a57d9da062b26d2a48d031744a1e Mon Sep 17 00:00:00 2001
-From: Shiji Yang <yangshiji66 at outlook.com>
-Date: Tue, 20 Jun 2023 18:43:22 +0800
-Subject: [PATCH 1/2] mips: pci-mt7620: do not print NFTS register value as
- error log
-
-These codes are used to read NFTS_TIMEOUT_DELAY register value and
-write it into kernel log after writing the register. they are only
-used for debugging during driver development, so there is no need
-to keep them now.
-
-Tested on MT7628AN router Motorola MWR03.
-
-Signed-off-by: Shiji Yang <yangshiji66 at outlook.com>
-Reviewed-by: Sergio Paracuellos <sergio.paracuellos at gmail.com>
-Signed-off-by: Thomas Bogendoerfer <tsbogend at alpha.franken.de>
----
- arch/mips/pci/pci-mt7620.c | 3 ---
- 1 file changed, 3 deletions(-)
-
---- a/arch/mips/pci/pci-mt7620.c
-+++ b/arch/mips/pci/pci-mt7620.c
-@@ -274,9 +274,6 @@ static int mt7628_pci_hw_init(struct pla
- val |= 0x50 << 8;
- pci_config_write(NULL, 0, 0x70c, 4, val);
-
-- pci_config_read(NULL, 0, 0x70c, 4, &val);
-- dev_err(&pdev->dev, "Port 0 N_FTS = %x\n", (unsigned int) val);
--
- return 0;
- }
-
diff --git a/target/linux/ramips/patches-6.6/010-v6.5-02-mips-pci-mt7620-use-dev_info-to-log-PCIe-device-dete.patch b/target/linux/ramips/patches-6.6/010-v6.5-02-mips-pci-mt7620-use-dev_info-to-log-PCIe-device-dete.patch
deleted file mode 100644
index 5898a110ea..0000000000
--- a/target/linux/ramips/patches-6.6/010-v6.5-02-mips-pci-mt7620-use-dev_info-to-log-PCIe-device-dete.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-From 89ec9bbe60b61cc6ae3eddd6d4f43e128f8a88de Mon Sep 17 00:00:00 2001
-From: Shiji Yang <yangshiji66 at outlook.com>
-Date: Tue, 20 Jun 2023 18:43:23 +0800
-Subject: [PATCH 2/2] mips: pci-mt7620: use dev_info() to log PCIe device
- detection result
-
-Usually, We only need to print the error log when there is a PCIe card but
-initialization fails. Whether the driver finds the PCIe card or not is the
-expected behavior. So it's better to log these information with dev_info().
-
-Tested on MT7628AN router Motorola MWR03.
-
-Signed-off-by: Shiji Yang <yangshiji66 at outlook.com>
-Reviewed-by: Sergio Paracuellos <sergio.paracuellos at gmail.com>
-Signed-off-by: Thomas Bogendoerfer <tsbogend at alpha.franken.de>
----
- arch/mips/pci/pci-mt7620.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/arch/mips/pci/pci-mt7620.c
-+++ b/arch/mips/pci/pci-mt7620.c
-@@ -331,7 +331,7 @@ static int mt7620_pci_probe(struct platf
- rt_sysc_m32(RALINK_PCIE0_CLK_EN, 0, RALINK_CLKCFG1);
- if (ralink_soc == MT762X_SOC_MT7620A)
- rt_sysc_m32(LC_CKDRVPD, PDRV_SW_SET, PPLL_DRV);
-- dev_err(&pdev->dev, "PCIE0 no card, disable it(RST&CLK)\n");
-+ dev_info(&pdev->dev, "PCIE0 no card, disable it(RST&CLK)\n");
- return -1;
- }
-
-@@ -374,7 +374,7 @@ int pcibios_map_irq(const struct pci_dev
- dev->bus->number, slot);
- return 0;
- }
-- dev_err(&dev->dev, "card - bus=0x%x, slot = 0x%x irq=%d\n",
-+ dev_info(&dev->dev, "card - bus=0x%x, slot = 0x%x irq=%d\n",
- dev->bus->number, slot, irq);
-
- /* configure the cache line size to 0x14 */
diff --git a/target/linux/ramips/patches-6.6/110-v6.4-PCI-mt7621-Use-dev_info-to-log-PCIe-card-detection.patch b/target/linux/ramips/patches-6.6/110-v6.4-PCI-mt7621-Use-dev_info-to-log-PCIe-card-detection.patch
deleted file mode 100644
index ad2191e655..0000000000
--- a/target/linux/ramips/patches-6.6/110-v6.4-PCI-mt7621-Use-dev_info-to-log-PCIe-card-detection.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From 50233e105a0332ec0f3bc83180c416e6b200471e Mon Sep 17 00:00:00 2001
-From: Sergio Paracuellos <sergio.paracuellos at gmail.com>
-Date: Fri, 24 Mar 2023 08:37:33 +0100
-Subject: PCI: mt7621: Use dev_info() to log PCIe card detection
-
-When there is no card plugged on a PCIe port a log reporting that
-the port will be disabled is flagged as an error (dev_err()).
-
-Since this is not an error at all, change the log level by using
-dev_info() instead.
-
-Link: https://lore.kernel.org/r/20230324073733.1596231-1-sergio.paracuellos@gmail.com
-Signed-off-by: Sergio Paracuellos <sergio.paracuellos at gmail.com>
-Signed-off-by: Lorenzo Pieralisi <lpieralisi at kernel.org>
----
- drivers/pci/controller/pcie-mt7621.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/pci/controller/pcie-mt7621.c
-+++ b/drivers/pci/controller/pcie-mt7621.c
-@@ -378,8 +378,8 @@ static int mt7621_pcie_init_ports(struct
- u32 slot = port->slot;
-
- if (!mt7621_pcie_port_is_linkup(port)) {
-- dev_err(dev, "pcie%d no card, disable it (RST & CLK)\n",
-- slot);
-+ dev_info(dev, "pcie%d no card, disable it (RST & CLK)\n",
-+ slot);
- mt7621_control_assert(port);
- port->enabled = false;
- num_disabled++;
More information about the lede-commits
mailing list