[openwrt/openwrt] mt76: update to Git HEAD (2024-04-03)
LEDE Commits
lede-commits at lists.infradead.org
Wed Apr 3 04:09:50 PDT 2024
nbd pushed a commit to openwrt/openwrt.git, branch main:
https://git.openwrt.org/a10a6fbac794b30885d65ec817ebdcfe9f94d78a
commit a10a6fbac794b30885d65ec817ebdcfe9f94d78a
Author: Felix Fietkau <nbd at nbd.name>
AuthorDate: Wed Apr 3 13:07:28 2024 +0200
mt76: update to Git HEAD (2024-04-03)
605624a4e17b mt76: fix path to page_pool helper include
e4de3592c4e3 wifi: mt76: mt7603: fix tx queue of loopback packets
446f652c967c wifi: mt76: mt7603: add wpdma tx eof flag for PSE client reset
669aba47a145 wifi: mt76: mt7915: fix HE PHY capability regression
5914ea57a31f wifi: mt76: mt7915: workaround dubious x | !y warning
e8b5991f7dac wifi: mt76: mt7915: workaround too long expansion sparse warnings
e507b4e32ead wifi: mt76: mt7921: fix fw used for offload check for mt7922
725f531c1459 wifi: mt76: connac: check for null before dereferencing
b108dda7e201 wifi: mt76: mt7996: fix size of txpower MCU command
5b7616491f07 wifi: mt76: mt7921: introduce mt7920 PCIe support
0436995feca9 wifi: mt76: mt7921s: fix potential hung tasks during chip recovery
75759dca73d5 wifi: mt76: mt7925: ensure 4-byte alignment for suspend & wow command
b96ab5e62010 wifi: mt76: mt7996: fix uninitialized variable in mt7996_irq_tasklet()
7ff11c7259a3 wifi: mt76: sdio: move mcu queue size check inside critical section
02846a5d0f0f wifi: mt76: mt7915: Remove unused of_gpio.h
cb8df32e0475 wifi: mt76: mt7996: disable rx header translation for BMC entry
a4c4b550512e wifi: mt76: connac: use peer address for station BMC entry
260c5b7c3ba0 wifi: mt76: mt7996: set RCPI value in rate control command
0b7e645db9c2 wifi: mt76: connac: enable HW CSO module for mt7996
f19035fe0b4d wifi: mt76: mt7996: fix non-main BSS no beacon issue for MBSS scenario
424e9df466ce wifi: mt76: mt7996: fix potential memory leakage when reading chip temperature
f70cb4f0508e wifi: mt76: connac: enable critical packet mode support for mt7992
5f1bf8865247 wifi: mt76: mt7996: add sanity checks for background radar trigger
1e336a8582dc wifi: mt76: connac: use muar idx 0xe for non-mt799x as well
Signed-off-by: Felix Fietkau <nbd at nbd.name>
---
package/kernel/mt76/Makefile | 8 +--
.../100-fix-build-on-linux-kernel-6.6.patch | 24 -------
...t7603-add-debugfs-attr-for-disabling-fram.patch | 81 ----------------------
3 files changed, 4 insertions(+), 109 deletions(-)
diff --git a/package/kernel/mt76/Makefile b/package/kernel/mt76/Makefile
index c44ed4d1da..3f48c76faa 100644
--- a/package/kernel/mt76/Makefile
+++ b/package/kernel/mt76/Makefile
@@ -1,16 +1,16 @@
include $(TOPDIR)/rules.mk
PKG_NAME:=mt76
-PKG_RELEASE=2
+PKG_RELEASE=1
PKG_LICENSE:=GPLv2
PKG_LICENSE_FILES:=
PKG_SOURCE_URL:=https://github.com/openwrt/mt76
PKG_SOURCE_PROTO:=git
-PKG_SOURCE_DATE:=2024-03-18
-PKG_SOURCE_VERSION:=2135e201e7a9339e018d4e2d4a33c73266e674d7
-PKG_MIRROR_HASH:=530db8a70d18295677989aafc9c1757b151ef77e359985417f1d36e7d2415d33
+PKG_SOURCE_DATE:=2024-04-03
+PKG_SOURCE_VERSION:=1e336a8582dce2ef32ddd440d423e9afef961e71
+PKG_MIRROR_HASH:=f3801af80d5f9c1aa266c9401d4dfa2d501df0382c81fd249150e17dddc70936
PKG_MAINTAINER:=Felix Fietkau <nbd at nbd.name>
PKG_USE_NINJA:=0
diff --git a/package/kernel/mt76/patches/100-fix-build-on-linux-kernel-6.6.patch b/package/kernel/mt76/patches/100-fix-build-on-linux-kernel-6.6.patch
deleted file mode 100644
index 4fdba0c472..0000000000
--- a/package/kernel/mt76/patches/100-fix-build-on-linux-kernel-6.6.patch
+++ /dev/null
@@ -1,24 +0,0 @@
---- a/mac80211.c
-+++ b/mac80211.c
-@@ -4,7 +4,9 @@
- */
- #include <linux/sched.h>
- #include <linux/of.h>
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(6,6,0)
- #include <net/page_pool.h>
-+#endif
- #include "mt76.h"
-
- #define CHAN2G(_idx, _freq) { \
---- a/mt76.h
-+++ b/mt76.h
-@@ -13,6 +13,9 @@
- #include <linux/leds.h>
- #include <linux/usb.h>
- #include <linux/average.h>
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(6,6,0)
-+#include <net/page_pool/helpers.h>
-+#endif
- #include <linux/soc/mediatek/mtk_wed.h>
- #include <net/mac80211.h>
- #include "util.h"
diff --git a/package/kernel/mt76/patches/101-wifi-mt76-mt7603-add-debugfs-attr-for-disabling-fram.patch b/package/kernel/mt76/patches/101-wifi-mt76-mt7603-add-debugfs-attr-for-disabling-fram.patch
deleted file mode 100644
index 7d2b7eccbf..0000000000
--- a/package/kernel/mt76/patches/101-wifi-mt76-mt7603-add-debugfs-attr-for-disabling-fram.patch
+++ /dev/null
@@ -1,81 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal at milecki.pl>
-Date: Mon, 25 Mar 2024 18:54:02 +0100
-Subject: [PATCH] wifi: mt76: mt7603: add debugfs attr for disabling frames
- buffering
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-MT7603EN and MT7628AN were reported by multiple users to be unstable
-under high traffic. Transmission of packets could stop for seconds often
-leading to disconnections.
-
-Long research & debugging revelaed a close relation between MCU
-interrupts of type PKT_TYPE_TXS and slowdowns / stalls. That led to
-questioning frames buffering feature.
-
-It turns out that disabling SKBs loopback code makes mt7603 devices much
-more stable under load. There are still some traffic hiccups but those
-happen like once every an hour and end up in recovery in most cases.
-
-Add a debugfs option for disabling frames buffering so users can give it
-a try. If this solution yields a success we can make this feature
-disabled by default.
-
-This change was successfully tested using 2 GHz AP interface on:
-1. Netgear R6220 - MT7621ST (SoC) + MT7603EN (WiFi) + MT7612EN (WiFi)
-2. Xiaomi Mi Router 4C - MT7628AN (Wi-Fi SoC)
-
-Link: https://lore.kernel.org/linux-wireless/7c96d5ee-86c1-8068-1b58-40db6087a24f@gmail.com/
-Closes: https://github.com/openwrt/mt76/issues/865
-Fixes: c8846e101502 ("mt76: add driver for MT7603E and MT7628/7688")
-Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
----
- mt7603/debugfs.c | 2 ++
- mt7603/dma.c | 3 +++
- mt7603/init.c | 1 +
- mt7603/mt7603.h | 2 ++
- 4 files changed, 8 insertions(+)
-
---- a/mt7603/debugfs.c
-+++ b/mt7603/debugfs.c
-@@ -115,4 +115,6 @@ void mt7603_init_debugfs(struct mt7603_d
- &dev->sensitivity_limit);
- debugfs_create_bool("dynamic_sensitivity", 0600, dir,
- &dev->dynamic_sensitivity);
-+ debugfs_create_bool("frames_buffering", 0600, dir,
-+ &dev->frames_buffering);
- }
---- a/mt7603/dma.c
-+++ b/mt7603/dma.c
-@@ -27,6 +27,9 @@ mt7603_rx_loopback_skb(struct mt7603_dev
- u32 val;
- u8 tid = 0;
-
-+ if (!dev->frames_buffering)
-+ goto free;
-+
- if (skb->len < MT_TXD_SIZE + sizeof(struct ieee80211_hdr))
- goto free;
-
---- a/mt7603/init.c
-+++ b/mt7603/init.c
-@@ -517,6 +517,7 @@ int mt7603_register_device(struct mt7603
- dev->slottime = 9;
- dev->sensitivity_limit = 28;
- dev->dynamic_sensitivity = true;
-+ dev->frames_buffering = true;
-
- ret = mt7603_init_hardware(dev);
- if (ret)
---- a/mt7603/mt7603.h
-+++ b/mt7603/mt7603.h
-@@ -155,6 +155,8 @@ struct mt7603_dev {
- u32 reset_test;
-
- unsigned int reset_cause[__RESET_CAUSE_MAX];
-+
-+ bool frames_buffering;
- };
-
- extern const struct mt76_driver_ops mt7603_drv_ops;
More information about the lede-commits
mailing list