[openwrt/openwrt] mediatek: separate dts/dtsi for Buffalo WSR series
LEDE Commits
lede-commits at lists.infradead.org
Sun Sep 24 09:43:58 PDT 2023
hauke pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/9f640cae75ec987f29bf697cee559a0a4ff497e0
commit 9f640cae75ec987f29bf697cee559a0a4ff497e0
Author: INAGAKI Hiroshi <musashino.open at gmail.com>
AuthorDate: Sun Aug 27 18:21:28 2023 +0900
mediatek: separate dts/dtsi for Buffalo WSR series
Separate dts/dtsi from the dts of Buffalo WSR-2533DHP2 to prepare adding
suppport for WSR-3200AX4S.
Signed-off-by: INAGAKI Hiroshi <musashino.open at gmail.com>
---
.../mediatek/dts/mt7622-buffalo-wsr-2533dhp2.dts | 230 +--------------------
...lo-wsr-2533dhp2.dts => mt7622-buffalo-wsr.dtsi} | 123 +----------
2 files changed, 6 insertions(+), 347 deletions(-)
diff --git a/target/linux/mediatek/dts/mt7622-buffalo-wsr-2533dhp2.dts b/target/linux/mediatek/dts/mt7622-buffalo-wsr-2533dhp2.dts
index 8b0dc1aa98..a9f2959191 100644
--- a/target/linux/mediatek/dts/mt7622-buffalo-wsr-2533dhp2.dts
+++ b/target/linux/mediatek/dts/mt7622-buffalo-wsr-2533dhp2.dts
@@ -1,120 +1,20 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/leds/common.h>
-#include "mt7622.dtsi"
-#include "mt6380.dtsi"
+#include "mt7622-buffalo-wsr.dtsi"
/ {
model = "Buffalo WSR-2533DHP2";
compatible = "buffalo,wsr-2533dhp2", "mediatek,mt7622";
aliases {
- serial0 = &uart0;
- led-boot = &power_green;
- led-failsafe = &power_amber;
- led-running = &power_green;
- led-upgrade = &power_green;
label-mac-device = &gmac0;
};
- chosen {
- bootargs = "earlycon=uart8250,mmio32,0x11002000 console=ttyS0,115200n8 swiotlb=512";
- };
-
memory {
reg = <0 0x40000000 0 0x0F000000>;
};
- leds {
- compatible = "gpio-leds";
-
- led-0 {
- label = "amber:wireless";
- gpios = <&pio 2 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_AMBER>;
- function = LED_FUNCTION_WLAN;
- };
-
- power_amber: led-1 {
- label = "amber:power";
- gpios = <&pio 3 GPIO_ACTIVE_LOW>;
- color = <LED_COLOR_ID_AMBER>;
- function = LED_FUNCTION_POWER;
- };
-
- power_green: led-2 {
- label = "green:power";
- gpios = <&pio 4 GPIO_ACTIVE_LOW>;
- color = <LED_COLOR_ID_GREEN>;
- function = LED_FUNCTION_POWER;
- };
-
- led-3 {
- label = "green:wireless";
- gpios = <&pio 15 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_GREEN>;
- function = LED_FUNCTION_WLAN;
- };
-
- led-4 {
- label = "green:internet";
- gpios = <&pio 19 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_GREEN>;
- function = LED_FUNCTION_WAN;
- };
-
- led-5 {
- label = "green:router";
- gpios = <&pio 20 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_GREEN>;
- function = LED_FUNCTION_INDICATOR;
- };
- };
-
- keys {
- compatible = "gpio-keys";
-
- key-reset {
- label = "reset";
- gpios = <&pio 0 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- /* GPIO 1 and 16 are a tri-state switch button with
- * ROUTER / AP / WB.
- */
- key-router {
- label = "router";
- gpios = <&pio 1 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_0>;
- linux,input-type = <EV_SW>;
- };
-
- key-bridge {
- label = "wb";
- gpios = <&pio 16 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_1>;
- linux,input-type = <EV_SW>;
- };
-
- /* GPIO 18 is a switch button with AUTO / MANUAL. */
- key-manual {
- label = "manual";
- gpios = <&pio 18 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_2>;
- linux,input-type = <EV_SW>;
- };
-
- key-wps {
- label = "wps";
- gpios = <&pio 102 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-
rtkgsw: rtkgsw at 0 {
compatible = "mediatek,rtk-gsw";
mediatek,ethsys = <ðsys>;
@@ -123,41 +23,7 @@
};
};
-&cpu0 {
- proc-supply = <&mt6380_vcpu_reg>;
- sram-supply = <&mt6380_vm_reg>;
-};
-
-&cpu1 {
- proc-supply = <&mt6380_vcpu_reg>;
- sram-supply = <&mt6380_vm_reg>;
-};
-
-&pcie0 {
- pinctrl-names = "default";
- pinctrl-0 = <&pcie0_pins>;
- status = "okay";
-};
-
-&slot0 {
- status = "okay";
-
- wifi at 0,0 {
- compatible = "mediatek,mt76";
- reg = <0x0000 0 0 0 0>;
- mediatek,mtd-eeprom = <&factory 0x5000>;
- ieee80211-freq-limit = <5000000 6000000>;
- };
-};
-
&pio {
- eth_pins: eth-pins {
- mux {
- function = "eth";
- groups = "mdc_mdio", "rgmii_via_gmac2";
- };
- };
-
/* Parallel nand is shared pin with eMMC */
parallel_nand_pins: parallel-nand-pins {
mux {
@@ -176,67 +42,11 @@
bias-pull-up;
};
};
-
- pcie0_pins: pcie0-pins {
- mux {
- function = "pcie";
- groups = "pcie0_pad_perst",
- "pcie0_1_waken",
- "pcie0_1_clkreq";
- };
- };
-
- pmic_bus_pins: pmic-bus-pins {
- mux {
- function = "pmic";
- groups = "pmic_bus";
- };
- };
-
- uart0_pins: uart0-pins {
- mux {
- function = "uart";
- groups = "uart0_0_tx_rx" ;
- };
- };
-
- watchdog_pins: watchdog-pins {
- mux {
- function = "watchdog";
- groups = "watchdog";
- };
- };
-};
-
-&bch {
- status = "okay";
};
-ð {
- pinctrl-names = "default";
- pinctrl-0 = <ð_pins>;
- status = "okay";
-
- gmac0: mac at 0 {
- compatible = "mediatek,eth-mac";
- reg = <0>;
-
- phy-connection-type = "2500base-x";
-
- nvmem-cells = <&macaddr_factory_4 (-1)>;
- nvmem-cell-names = "mac-address";
-
- fixed-link {
- speed = <2500>;
- full-duplex;
- pause;
- };
- };
-
- mdio: mdio-bus {
- #address-cells = <1>;
- #size-cells = <0>;
- };
+&gmac0 {
+ nvmem-cells = <&macaddr_factory_4 (-1)>;
+ nvmem-cell-names = "mac-address";
};
&nandc {
@@ -321,35 +131,3 @@
};
};
};
-
-&pwm {
- status = "okay";
-};
-
-&pwrap {
- pinctrl-names = "default";
- pinctrl-0 = <&pmic_bus_pins>;
- status = "okay";
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins>;
- status = "okay";
-};
-
-&watchdog {
- pinctrl-names = "default";
- pinctrl-0 = <&watchdog_pins>;
- status = "okay";
-};
-
-&wmac {
- status = "okay";
-
- mediatek,mtd-eeprom = <&factory 0x0>;
-};
-
-&rtc {
- status = "disabled";
-};
diff --git a/target/linux/mediatek/dts/mt7622-buffalo-wsr-2533dhp2.dts b/target/linux/mediatek/dts/mt7622-buffalo-wsr.dtsi
similarity index 64%
copy from target/linux/mediatek/dts/mt7622-buffalo-wsr-2533dhp2.dts
copy to target/linux/mediatek/dts/mt7622-buffalo-wsr.dtsi
index 8b0dc1aa98..e77f83d354 100644
--- a/target/linux/mediatek/dts/mt7622-buffalo-wsr-2533dhp2.dts
+++ b/target/linux/mediatek/dts/mt7622-buffalo-wsr.dtsi
@@ -1,5 +1,6 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
+
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/leds/common.h>
@@ -8,26 +9,18 @@
#include "mt6380.dtsi"
/ {
- model = "Buffalo WSR-2533DHP2";
- compatible = "buffalo,wsr-2533dhp2", "mediatek,mt7622";
-
aliases {
serial0 = &uart0;
led-boot = &power_green;
led-failsafe = &power_amber;
led-running = &power_green;
led-upgrade = &power_green;
- label-mac-device = &gmac0;
};
chosen {
bootargs = "earlycon=uart8250,mmio32,0x11002000 console=ttyS0,115200n8 swiotlb=512";
};
- memory {
- reg = <0 0x40000000 0 0x0F000000>;
- };
-
leds {
compatible = "gpio-leds";
@@ -114,13 +107,6 @@
linux,code = <KEY_WPS_BUTTON>;
};
};
-
- rtkgsw: rtkgsw at 0 {
- compatible = "mediatek,rtk-gsw";
- mediatek,ethsys = <ðsys>;
- mediatek,mdio = <&mdio>;
- mediatek,reset-pin = <&pio 54 GPIO_ACTIVE_HIGH>;
- };
};
&cpu0 {
@@ -158,25 +144,6 @@
};
};
- /* Parallel nand is shared pin with eMMC */
- parallel_nand_pins: parallel-nand-pins {
- mux {
- function = "flash";
- groups = "par_nand";
- };
-
- conf-cmd-dat {
- pins = "NCEB", "NWEB", "NREB",
- "NDL4", "NDL5", "NDL6",
- "NDL7", "NRB", "NCLE",
- "NALE", "NDL0", "NDL1",
- "NDL2", "NDL3";
- input-enable;
- drive-strength = <8>;
- bias-pull-up;
- };
- };
-
pcie0_pins: pcie0-pins {
mux {
function = "pcie";
@@ -208,10 +175,6 @@
};
};
-&bch {
- status = "okay";
-};
-
ð {
pinctrl-names = "default";
pinctrl-0 = <ð_pins>;
@@ -223,9 +186,6 @@
phy-connection-type = "2500base-x";
- nvmem-cells = <&macaddr_factory_4 (-1)>;
- nvmem-cell-names = "mac-address";
-
fixed-link {
speed = <2500>;
full-duplex;
@@ -239,87 +199,8 @@
};
};
-&nandc {
- pinctrl-names = "default";
- pinctrl-0 = <¶llel_nand_pins>;
+&bch {
status = "okay";
-
- nand at 0 {
- reg = <0>;
- nand-ecc-mode = "hw";
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition at 0 {
- label = "Preloader";
- reg = <0x0 0x80000>;
- read-only;
- };
-
- partition at 80000 {
- label = "ATF";
- reg = <0x80000 0x40000>;
- read-only;
- };
-
- partition at c0000 {
- label = "Bootloader";
- reg = <0xc0000 0x80000>;
- read-only;
- };
-
- partition at 140000 {
- label = "Config";
- reg = <0x140000 0x80000>;
- };
-
- factory: partition at 1c0000 {
- compatible = "nvmem-cells";
- label = "factory";
- reg = <0x1c0000 0x40000>;
- read-only;
-
- nvmem-layout {
- compatible = "fixed-layout";
- #address-cells = <1>;
- #size-cells = <1>;
-
- macaddr_factory_4: macaddr at 4 {
- compatible = "mac-base";
- reg = <0x4 0x6>;
- #nvmem-cell-cells = <1>;
- };
- };
- };
-
- partition at 200000 {
- compatible = "brcm,trx";
- brcm,trx-magic = <0x32504844>;
- label = "firmware";
- reg = <0x200000 0x3a00000>;
- };
-
- partition at 3C00000 {
- label = "Kernel2";
- reg = <0x3c00000 0x3a00000>;
- };
-
- partition at 7600000 {
- label = "glbcfg";
- reg = <0x7600000 0x200000>;
- read-only;
- };
-
- partition at 7800000 {
- label = "board_data";
- reg = <0x7800000 0x200000>;
- read-only;
- };
- };
- };
};
&pwm {
More information about the lede-commits
mailing list