[openwrt/openwrt] generic: mt7530: backport support for the MT7988 built-in switch
LEDE Commits
lede-commits at lists.infradead.org
Thu May 25 01:40:25 PDT 2023
dangole pushed a commit to openwrt/openwrt.git, branch openwrt-23.05:
https://git.openwrt.org/f7d0a4797feaee0c03d3f1cd5459702b13337ba2
commit f7d0a4797feaee0c03d3f1cd5459702b13337ba2
Author: Daniel Golle <daniel at makrotopia.org>
AuthorDate: Sun Apr 30 14:32:03 2023 +0100
generic: mt7530: backport support for the MT7988 built-in switch
Backport commits adding support for the MT7988 built-in switch to the
mt7530 driver.
This change results in the Kconfig symbol NET_DSA_MT7530 to be extended
by NET_DSA_MT7530_MDIO (everything formally covered by NET_DSA_MT7530)
and NET_DSA_MT7530_MMIO (a new driver for the MMIO-connected built-in
switch of the MT7988 SoC).
Select NET_DSA_MT7530_MDIO for all targets previously selecting
NET_DSA_MT7530, with the exception of mediatek/filogic which also
selects NET_DSA_MT7530_MMIO.
Signed-off-by: Daniel Golle <daniel at makrotopia.org>
(cherry picked from commit 958fdf36e35c814eb83faf2c39db4ca379c921b5)
---
...530-make-some-noise-if-register-read-fail.patch | 32 +
...et-dsa-mt7530-refactor-SGMII-PCS-creation.patch | 111 ++++
...-dsa-mt7530-use-unlocked-regmap-accessors.patch | 74 +++
...530-use-regmap-to-access-switch-register-.patch | 224 +++++++
...530-move-SGMII-PCS-creation-to-mt7530_pro.patch | 54 ++
...06-net-dsa-mt7530-introduce-mutex-helpers.patch | 273 ++++++++
...530-move-p5_intf_modes-function-to-mt7530.patch | 75 +++
...530-introduce-mt7530_probe_common-helper-.patch | 155 +++++
...530-introduce-mt7530_remove_common-helper.patch | 55 ++
...530-split-off-common-parts-from-mt7531_se.patch | 143 +++++
...dsa-mt7530-introduce-separate-MDIO-driver.patch | 692 +++++++++++++++++++++
...530-skip-locking-if-MDIO-bus-isn-t-presen.patch | 47 ++
...530-introduce-driver-for-MT7988-built-in-.patch | 421 +++++++++++++
...4-net-dsa-mt7530-fix-support-for-MT7531BE.patch | 118 ++++
...ver-for-Motorcomm-yt8521-gigabit-ethernet.patch | 2 +-
...em-Add-driver-for-OCOTP-in-Sunplus-SP7021.patch | 2 +-
...6.0-0001-nvmem-microchip-otpc-add-support.patch | 2 +-
...ensure-all-MACs-are-powered-down-before-r.patch | 2 +-
...30-register-OF-node-for-internal-MDIO-bus.patch | 4 +-
target/linux/mediatek/filogic/config-5.15 | 2 +
target/linux/mediatek/mt7622/config-5.15 | 2 +
target/linux/mediatek/mt7623/config-5.15 | 2 +
target/linux/mediatek/mt7629/config-5.15 | 2 +
target/linux/ramips/mt7621/config-5.15 | 2 +
...-watchdog-add-realtek-otto-watchdog-timer.patch | 2 +-
...00-net-dsa-add-support-for-rtl838x-switch.patch | 4 +-
26 files changed, 2493 insertions(+), 9 deletions(-)
diff --git a/target/linux/generic/backport-5.15/790-v6.4-0001-net-dsa-mt7530-make-some-noise-if-register-read-fail.patch b/target/linux/generic/backport-5.15/790-v6.4-0001-net-dsa-mt7530-make-some-noise-if-register-read-fail.patch
new file mode 100644
index 0000000000..ffbdde5a57
--- /dev/null
+++ b/target/linux/generic/backport-5.15/790-v6.4-0001-net-dsa-mt7530-make-some-noise-if-register-read-fail.patch
@@ -0,0 +1,32 @@
+From b6f56cddb5f57a0b8da0ce582232a2f1933558c6 Mon Sep 17 00:00:00 2001
+From: Daniel Golle <daniel at makrotopia.org>
+Date: Mon, 3 Apr 2023 02:17:19 +0100
+Subject: [PATCH 04/16] net: dsa: mt7530: make some noise if register read
+ fails
+
+Simply returning the negative error value instead of the read value
+doesn't seem like a good idea. Return 0 instead and add WARN_ON_ONCE(1)
+so this kind of error will not go unnoticed.
+
+Suggested-by: Andrew Lunn <andrew at lunn.ch>
+Signed-off-by: Daniel Golle <daniel at makrotopia.org>
+Reviewed-by: Andrew Lunn <andrew at lunn.ch>
+Signed-off-by: David S. Miller <davem at davemloft.net>
+---
+ drivers/net/dsa/mt7530.c | 3 ++-
+ 1 file changed, 2 insertions(+), 1 deletion(-)
+
+--- a/drivers/net/dsa/mt7530.c
++++ b/drivers/net/dsa/mt7530.c
+@@ -224,9 +224,10 @@ mt7530_mii_read(struct mt7530_priv *priv
+ /* MT7530 uses 31 as the pseudo port */
+ ret = bus->write(bus, 0x1f, 0x1f, page);
+ if (ret < 0) {
++ WARN_ON_ONCE(1);
+ dev_err(&bus->dev,
+ "failed to read mt7530 register\n");
+- return ret;
++ return 0;
+ }
+
+ lo = bus->read(bus, 0x1f, r);
diff --git a/target/linux/generic/backport-5.15/790-v6.4-0002-net-dsa-mt7530-refactor-SGMII-PCS-creation.patch b/target/linux/generic/backport-5.15/790-v6.4-0002-net-dsa-mt7530-refactor-SGMII-PCS-creation.patch
new file mode 100644
index 0000000000..8963d93d10
--- /dev/null
+++ b/target/linux/generic/backport-5.15/790-v6.4-0002-net-dsa-mt7530-refactor-SGMII-PCS-creation.patch
@@ -0,0 +1,111 @@
+From 9ecc00164dc2300dfcd40afe549a8ee951dfea9f Mon Sep 17 00:00:00 2001
+From: Daniel Golle <daniel at makrotopia.org>
+Date: Mon, 3 Apr 2023 02:17:30 +0100
+Subject: [PATCH 05/16] net: dsa: mt7530: refactor SGMII PCS creation
+
+Instead of macro templates use a dedidated function and allocated
+regmap_config when creating the regmaps for the pcs-mtk-lynxi
+instances.
+This is in preparation to switching to use unlocked regmap accessors
+and have regmap's locking API handle locking for us.
+
+Signed-off-by: Daniel Golle <daniel at makrotopia.org>
+Reviewed-by: Andrew Lunn <andrew at lunn.ch>
+Signed-off-by: David S. Miller <davem at davemloft.net>
+---
+ drivers/net/dsa/mt7530.c | 74 +++++++++++++++++++++++++++-------------
+ 1 file changed, 50 insertions(+), 24 deletions(-)
+
+--- a/drivers/net/dsa/mt7530.c
++++ b/drivers/net/dsa/mt7530.c
+@@ -2926,26 +2926,56 @@ static const struct regmap_bus mt7531_re
+ .reg_update_bits = mt7530_regmap_update_bits,
+ };
+
+-#define MT7531_PCS_REGMAP_CONFIG(_name, _reg_base) \
+- { \
+- .name = _name, \
+- .reg_bits = 16, \
+- .val_bits = 32, \
+- .reg_stride = 4, \
+- .reg_base = _reg_base, \
+- .max_register = 0x17c, \
++static int
++mt7531_create_sgmii(struct mt7530_priv *priv)
++{
++ struct regmap_config *mt7531_pcs_config[2];
++ struct phylink_pcs *pcs;
++ struct regmap *regmap;
++ int i, ret = 0;
++
++ for (i = 0; i < 2; i++) {
++ mt7531_pcs_config[i] = devm_kzalloc(priv->dev,
++ sizeof(struct regmap_config),
++ GFP_KERNEL);
++ if (!mt7531_pcs_config[i]) {
++ ret = -ENOMEM;
++ break;
++ }
++
++ mt7531_pcs_config[i]->name = i ? "port6" : "port5";
++ mt7531_pcs_config[i]->reg_bits = 16;
++ mt7531_pcs_config[i]->val_bits = 32;
++ mt7531_pcs_config[i]->reg_stride = 4;
++ mt7531_pcs_config[i]->reg_base = MT7531_SGMII_REG_BASE(5 + i);
++ mt7531_pcs_config[i]->max_register = 0x17c;
++
++ regmap = devm_regmap_init(priv->dev,
++ &mt7531_regmap_bus, priv,
++ mt7531_pcs_config[i]);
++ if (IS_ERR(regmap)) {
++ ret = PTR_ERR(regmap);
++ break;
++ }
++ pcs = mtk_pcs_lynxi_create(priv->dev, regmap,
++ MT7531_PHYA_CTRL_SIGNAL3, 0);
++ if (!pcs) {
++ ret = -ENXIO;
++ break;
++ }
++ priv->ports[5 + i].sgmii_pcs = pcs;
+ }
+
+-static const struct regmap_config mt7531_pcs_config[] = {
+- MT7531_PCS_REGMAP_CONFIG("port5", MT7531_SGMII_REG_BASE(5)),
+- MT7531_PCS_REGMAP_CONFIG("port6", MT7531_SGMII_REG_BASE(6)),
+-};
++ if (ret && i)
++ mtk_pcs_lynxi_destroy(priv->ports[5].sgmii_pcs);
++
++ return ret;
++}
+
+ static int
+ mt753x_setup(struct dsa_switch *ds)
+ {
+ struct mt7530_priv *priv = ds->priv;
+- struct regmap *regmap;
+ int i, ret;
+
+ /* Initialise the PCS devices */
+@@ -2967,15 +2997,11 @@ mt753x_setup(struct dsa_switch *ds)
+ if (ret && priv->irq)
+ mt7530_free_irq_common(priv);
+
+- if (priv->id == ID_MT7531)
+- for (i = 0; i < 2; i++) {
+- regmap = devm_regmap_init(ds->dev,
+- &mt7531_regmap_bus, priv,
+- &mt7531_pcs_config[i]);
+- priv->ports[5 + i].sgmii_pcs =
+- mtk_pcs_lynxi_create(ds->dev, regmap,
+- MT7531_PHYA_CTRL_SIGNAL3, 0);
+- }
++ if (priv->id == ID_MT7531) {
++ ret = mt7531_create_sgmii(priv);
++ if (ret && priv->irq)
++ mt7530_free_irq_common(priv);
++ }
+
+ return ret;
+ }
diff --git a/target/linux/generic/backport-5.15/790-v6.4-0003-net-dsa-mt7530-use-unlocked-regmap-accessors.patch b/target/linux/generic/backport-5.15/790-v6.4-0003-net-dsa-mt7530-use-unlocked-regmap-accessors.patch
new file mode 100644
index 0000000000..1b4a956199
--- /dev/null
+++ b/target/linux/generic/backport-5.15/790-v6.4-0003-net-dsa-mt7530-use-unlocked-regmap-accessors.patch
@@ -0,0 +1,74 @@
+From 1bd099c49f65ed923b9f19b8c4b3cd1ff0024091 Mon Sep 17 00:00:00 2001
+From: Daniel Golle <daniel at makrotopia.org>
+Date: Mon, 3 Apr 2023 02:17:40 +0100
+Subject: [PATCH 06/16] net: dsa: mt7530: use unlocked regmap accessors
+
+Instead of wrapping the locked register accessor functions, use the
+unlocked variants and add locking wrapper functions to let regmap
+handle the locking.
+
+This is a preparation towards being able to always use regmap to
+access switch registers instead of open-coded accessor functions.
+
+Signed-off-by: Daniel Golle <daniel at makrotopia.org>
+Reviewed-by: Andrew Lunn <andrew at lunn.ch>
+Signed-off-by: David S. Miller <davem at davemloft.net>
+---
+ drivers/net/dsa/mt7530.c | 23 ++++++++++++++---------
+ 1 file changed, 14 insertions(+), 9 deletions(-)
+
+--- a/drivers/net/dsa/mt7530.c
++++ b/drivers/net/dsa/mt7530.c
+@@ -2899,7 +2899,7 @@ static int mt7530_regmap_read(void *cont
+ {
+ struct mt7530_priv *priv = context;
+
+- *val = mt7530_read(priv, reg);
++ *val = mt7530_mii_read(priv, reg);
+ return 0;
+ };
+
+@@ -2907,23 +2907,25 @@ static int mt7530_regmap_write(void *con
+ {
+ struct mt7530_priv *priv = context;
+
+- mt7530_write(priv, reg, val);
++ mt7530_mii_write(priv, reg, val);
+ return 0;
+ };
+
+-static int mt7530_regmap_update_bits(void *context, unsigned int reg,
+- unsigned int mask, unsigned int val)
++static void
++mt7530_mdio_regmap_lock(void *mdio_lock)
+ {
+- struct mt7530_priv *priv = context;
++ mutex_lock_nested(mdio_lock, MDIO_MUTEX_NESTED);
++}
+
+- mt7530_rmw(priv, reg, mask, val);
+- return 0;
+-};
++static void
++mt7530_mdio_regmap_unlock(void *mdio_lock)
++{
++ mutex_unlock(mdio_lock);
++}
+
+ static const struct regmap_bus mt7531_regmap_bus = {
+ .reg_write = mt7530_regmap_write,
+ .reg_read = mt7530_regmap_read,
+- .reg_update_bits = mt7530_regmap_update_bits,
+ };
+
+ static int
+@@ -2949,6 +2951,9 @@ mt7531_create_sgmii(struct mt7530_priv *
+ mt7531_pcs_config[i]->reg_stride = 4;
+ mt7531_pcs_config[i]->reg_base = MT7531_SGMII_REG_BASE(5 + i);
+ mt7531_pcs_config[i]->max_register = 0x17c;
++ mt7531_pcs_config[i]->lock = mt7530_mdio_regmap_lock;
++ mt7531_pcs_config[i]->unlock = mt7530_mdio_regmap_unlock;
++ mt7531_pcs_config[i]->lock_arg = &priv->bus->mdio_lock;
+
+ regmap = devm_regmap_init(priv->dev,
+ &mt7531_regmap_bus, priv,
diff --git a/target/linux/generic/backport-5.15/790-v6.4-0004-net-dsa-mt7530-use-regmap-to-access-switch-register-.patch b/target/linux/generic/backport-5.15/790-v6.4-0004-net-dsa-mt7530-use-regmap-to-access-switch-register-.patch
new file mode 100644
index 0000000000..2d8bab9da6
--- /dev/null
+++ b/target/linux/generic/backport-5.15/790-v6.4-0004-net-dsa-mt7530-use-regmap-to-access-switch-register-.patch
@@ -0,0 +1,224 @@
+From a08c045580e060a6886bbb656c50ae20b0c780b5 Mon Sep 17 00:00:00 2001
+From: Daniel Golle <daniel at makrotopia.org>
+Date: Mon, 3 Apr 2023 02:17:52 +0100
+Subject: [PATCH 07/16] net: dsa: mt7530: use regmap to access switch register
+ space
+
+Use regmap API to access the switch register space.
+
+Signed-off-by: Daniel Golle <daniel at makrotopia.org>
+Signed-off-by: David S. Miller <davem at davemloft.net>
+---
+ drivers/net/dsa/mt7530.c | 99 ++++++++++++++++++++++++----------------
+ drivers/net/dsa/mt7530.h | 2 +
+ 2 files changed, 62 insertions(+), 39 deletions(-)
+
+--- a/drivers/net/dsa/mt7530.c
++++ b/drivers/net/dsa/mt7530.c
+@@ -183,9 +183,9 @@ core_clear(struct mt7530_priv *priv, u32
+ }
+
+ static int
+-mt7530_mii_write(struct mt7530_priv *priv, u32 reg, u32 val)
++mt7530_regmap_write(void *context, unsigned int reg, unsigned int val)
+ {
+- struct mii_bus *bus = priv->bus;
++ struct mii_bus *bus = context;
+ u16 page, r, lo, hi;
+ int ret;
+
+@@ -197,24 +197,34 @@ mt7530_mii_write(struct mt7530_priv *pri
+ /* MT7530 uses 31 as the pseudo port */
+ ret = bus->write(bus, 0x1f, 0x1f, page);
+ if (ret < 0)
+- goto err;
++ return ret;
+
+ ret = bus->write(bus, 0x1f, r, lo);
+ if (ret < 0)
+- goto err;
++ return ret;
+
+ ret = bus->write(bus, 0x1f, 0x10, hi);
+-err:
++ return ret;
++}
++
++static int
++mt7530_mii_write(struct mt7530_priv *priv, u32 reg, u32 val)
++{
++ int ret;
++
++ ret = regmap_write(priv->regmap, reg, val);
++
+ if (ret < 0)
+- dev_err(&bus->dev,
++ dev_err(priv->dev,
+ "failed to write mt7530 register\n");
++
+ return ret;
+ }
+
+-static u32
+-mt7530_mii_read(struct mt7530_priv *priv, u32 reg)
++static int
++mt7530_regmap_read(void *context, unsigned int reg, unsigned int *val)
+ {
+- struct mii_bus *bus = priv->bus;
++ struct mii_bus *bus = context;
+ u16 page, r, lo, hi;
+ int ret;
+
+@@ -223,17 +233,32 @@ mt7530_mii_read(struct mt7530_priv *priv
+
+ /* MT7530 uses 31 as the pseudo port */
+ ret = bus->write(bus, 0x1f, 0x1f, page);
+- if (ret < 0) {
++ if (ret < 0)
++ return ret;
++
++ lo = bus->read(bus, 0x1f, r);
++ hi = bus->read(bus, 0x1f, 0x10);
++
++ *val = (hi << 16) | (lo & 0xffff);
++
++ return 0;
++}
++
++static u32
++mt7530_mii_read(struct mt7530_priv *priv, u32 reg)
++{
++ int ret;
++ u32 val;
++
++ ret = regmap_read(priv->regmap, reg, &val);
++ if (ret) {
+ WARN_ON_ONCE(1);
+- dev_err(&bus->dev,
++ dev_err(priv->dev,
+ "failed to read mt7530 register\n");
+ return 0;
+ }
+
+- lo = bus->read(bus, 0x1f, r);
+- hi = bus->read(bus, 0x1f, 0x10);
+-
+- return (hi << 16) | (lo & 0xffff);
++ return val;
+ }
+
+ static void
+@@ -283,14 +308,10 @@ mt7530_rmw(struct mt7530_priv *priv, u32
+ u32 mask, u32 set)
+ {
+ struct mii_bus *bus = priv->bus;
+- u32 val;
+
+ mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
+
+- val = mt7530_mii_read(priv, reg);
+- val &= ~mask;
+- val |= set;
+- mt7530_mii_write(priv, reg, val);
++ regmap_update_bits(priv->regmap, reg, mask, set);
+
+ mutex_unlock(&bus->mdio_lock);
+ }
+@@ -298,7 +319,7 @@ mt7530_rmw(struct mt7530_priv *priv, u32
+ static void
+ mt7530_set(struct mt7530_priv *priv, u32 reg, u32 val)
+ {
+- mt7530_rmw(priv, reg, 0, val);
++ mt7530_rmw(priv, reg, val, val);
+ }
+
+ static void
+@@ -2895,22 +2916,6 @@ static const struct phylink_pcs_ops mt75
+ .pcs_an_restart = mt7530_pcs_an_restart,
+ };
+
+-static int mt7530_regmap_read(void *context, unsigned int reg, unsigned int *val)
+-{
+- struct mt7530_priv *priv = context;
+-
+- *val = mt7530_mii_read(priv, reg);
+- return 0;
+-};
+-
+-static int mt7530_regmap_write(void *context, unsigned int reg, unsigned int val)
+-{
+- struct mt7530_priv *priv = context;
+-
+- mt7530_mii_write(priv, reg, val);
+- return 0;
+-};
+-
+ static void
+ mt7530_mdio_regmap_lock(void *mdio_lock)
+ {
+@@ -2923,7 +2928,7 @@ mt7530_mdio_regmap_unlock(void *mdio_loc
+ mutex_unlock(mdio_lock);
+ }
+
+-static const struct regmap_bus mt7531_regmap_bus = {
++static const struct regmap_bus mt7530_regmap_bus = {
+ .reg_write = mt7530_regmap_write,
+ .reg_read = mt7530_regmap_read,
+ };
+@@ -2956,7 +2961,7 @@ mt7531_create_sgmii(struct mt7530_priv *
+ mt7531_pcs_config[i]->lock_arg = &priv->bus->mdio_lock;
+
+ regmap = devm_regmap_init(priv->dev,
+- &mt7531_regmap_bus, priv,
++ &mt7530_regmap_bus, priv->bus,
+ mt7531_pcs_config[i]);
+ if (IS_ERR(regmap)) {
+ ret = PTR_ERR(regmap);
+@@ -3121,6 +3126,7 @@ MODULE_DEVICE_TABLE(of, mt7530_of_match)
+ static int
+ mt7530_probe(struct mdio_device *mdiodev)
+ {
++ static struct regmap_config *regmap_config;
+ struct mt7530_priv *priv;
+ struct device_node *dn;
+
+@@ -3200,6 +3206,21 @@ mt7530_probe(struct mdio_device *mdiodev
+ mutex_init(&priv->reg_mutex);
+ dev_set_drvdata(&mdiodev->dev, priv);
+
++ regmap_config = devm_kzalloc(&mdiodev->dev, sizeof(*regmap_config),
++ GFP_KERNEL);
++ if (!regmap_config)
++ return -ENOMEM;
++
++ regmap_config->reg_bits = 16;
++ regmap_config->val_bits = 32;
++ regmap_config->reg_stride = 4;
++ regmap_config->max_register = MT7530_CREV;
++ regmap_config->disable_locking = true;
++ priv->regmap = devm_regmap_init(priv->dev, &mt7530_regmap_bus,
++ priv->bus, regmap_config);
++ if (IS_ERR(priv->regmap))
++ return PTR_ERR(priv->regmap);
++
+ return dsa_register_switch(priv->ds);
+ }
+
+--- a/drivers/net/dsa/mt7530.h
++++ b/drivers/net/dsa/mt7530.h
+@@ -747,6 +747,7 @@ struct mt753x_info {
+ * @dev: The device pointer
+ * @ds: The pointer to the dsa core structure
+ * @bus: The bus used for the device and built-in PHY
++ * @regmap: The regmap instance representing all switch registers
+ * @rstc: The pointer to reset control used by MCM
+ * @core_pwr: The power supplied into the core
+ * @io_pwr: The power supplied into the I/O
+@@ -767,6 +768,7 @@ struct mt7530_priv {
+ struct device *dev;
+ struct dsa_switch *ds;
+ struct mii_bus *bus;
++ struct regmap *regmap;
+ struct reset_control *rstc;
+ struct regulator *core_pwr;
+ struct regulator *io_pwr;
diff --git a/target/linux/generic/backport-5.15/790-v6.4-0005-net-dsa-mt7530-move-SGMII-PCS-creation-to-mt7530_pro.patch b/target/linux/generic/backport-5.15/790-v6.4-0005-net-dsa-mt7530-move-SGMII-PCS-creation-to-mt7530_pro.patch
new file mode 100644
index 0000000000..0bb64c3c5e
--- /dev/null
+++ b/target/linux/generic/backport-5.15/790-v6.4-0005-net-dsa-mt7530-move-SGMII-PCS-creation-to-mt7530_pro.patch
@@ -0,0 +1,54 @@
+From 6de2852297737171ba96b91e89bf302ca1fda869 Mon Sep 17 00:00:00 2001
+From: Daniel Golle <daniel at makrotopia.org>
+Date: Mon, 3 Apr 2023 02:18:04 +0100
+Subject: [PATCH 08/16] net: dsa: mt7530: move SGMII PCS creation to
+ mt7530_probe function
+
+Move creating the SGMII PCS from mt753x_setup() to the more appropriate
+mt7530_probe() function.
+This is done also in preparation of moving all functions related to
+MDIO-connected MT753x switches to a separate module.
+
+Signed-off-by: Daniel Golle <daniel at makrotopia.org>
+Reviewed-by: Andrew Lunn <andrew at lunn.ch>
+Signed-off-by: David S. Miller <davem at davemloft.net>
+---
+ drivers/net/dsa/mt7530.c | 13 +++++++------
+ 1 file changed, 7 insertions(+), 6 deletions(-)
+
+--- a/drivers/net/dsa/mt7530.c
++++ b/drivers/net/dsa/mt7530.c
+@@ -3007,12 +3007,6 @@ mt753x_setup(struct dsa_switch *ds)
+ if (ret && priv->irq)
+ mt7530_free_irq_common(priv);
+
+- if (priv->id == ID_MT7531) {
+- ret = mt7531_create_sgmii(priv);
+- if (ret && priv->irq)
+- mt7530_free_irq_common(priv);
+- }
+-
+ return ret;
+ }
+
+@@ -3129,6 +3123,7 @@ mt7530_probe(struct mdio_device *mdiodev
+ static struct regmap_config *regmap_config;
+ struct mt7530_priv *priv;
+ struct device_node *dn;
++ int ret;
+
+ dn = mdiodev->dev.of_node;
+
+@@ -3221,6 +3216,12 @@ mt7530_probe(struct mdio_device *mdiodev
+ if (IS_ERR(priv->regmap))
+ return PTR_ERR(priv->regmap);
+
++ if (priv->id == ID_MT7531) {
++ ret = mt7531_create_sgmii(priv);
++ if (ret)
++ return ret;
++ }
++
+ return dsa_register_switch(priv->ds);
+ }
+
diff --git a/target/linux/generic/backport-5.15/790-v6.4-0006-net-dsa-mt7530-introduce-mutex-helpers.patch b/target/linux/generic/backport-5.15/790-v6.4-0006-net-dsa-mt7530-introduce-mutex-helpers.patch
new file mode 100644
index 0000000000..c23f96e7a6
--- /dev/null
+++ b/target/linux/generic/backport-5.15/790-v6.4-0006-net-dsa-mt7530-introduce-mutex-helpers.patch
@@ -0,0 +1,273 @@
+From 1557c679f71c82a994eae0baadbaeb62b71e15bf Mon Sep 17 00:00:00 2001
+From: Daniel Golle <daniel at makrotopia.org>
+Date: Mon, 3 Apr 2023 02:18:16 +0100
+Subject: [PATCH 09/16] net: dsa: mt7530: introduce mutex helpers
+
+As the MDIO bus lock only needs to be involved if actually operating
+on an MDIO-connected switch we will need to skip locking for built-in
+switches which are accessed via MMIO.
+Create helper functions which simplify that upcoming change.
+
+Signed-off-by: Daniel Golle <daniel at makrotopia.org>
+Reviewed-by: Andrew Lunn <andrew at lunn.ch>
+Signed-off-by: David S. Miller <davem at davemloft.net>
+---
+ drivers/net/dsa/mt7530.c | 73 ++++++++++++++++++++--------------------
+ 1 file changed, 36 insertions(+), 37 deletions(-)
+
+--- a/drivers/net/dsa/mt7530.c
++++ b/drivers/net/dsa/mt7530.c
+@@ -143,31 +143,40 @@ err:
+ }
+
+ static void
+-core_write(struct mt7530_priv *priv, u32 reg, u32 val)
++mt7530_mutex_lock(struct mt7530_priv *priv)
+ {
+- struct mii_bus *bus = priv->bus;
++ mutex_lock_nested(&priv->bus->mdio_lock, MDIO_MUTEX_NESTED);
++}
+
+- mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
++static void
++mt7530_mutex_unlock(struct mt7530_priv *priv)
++{
++ mutex_unlock(&priv->bus->mdio_lock);
++}
++
++static void
++core_write(struct mt7530_priv *priv, u32 reg, u32 val)
++{
++ mt7530_mutex_lock(priv);
+
+ core_write_mmd_indirect(priv, reg, MDIO_MMD_VEND2, val);
+
+- mutex_unlock(&bus->mdio_lock);
++ mt7530_mutex_unlock(priv);
+ }
+
+ static void
+ core_rmw(struct mt7530_priv *priv, u32 reg, u32 mask, u32 set)
+ {
+- struct mii_bus *bus = priv->bus;
+ u32 val;
+
+- mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
++ mt7530_mutex_lock(priv);
+
+ val = core_read_mmd_indirect(priv, reg, MDIO_MMD_VEND2);
+ val &= ~mask;
+ val |= set;
+ core_write_mmd_indirect(priv, reg, MDIO_MMD_VEND2, val);
+
+- mutex_unlock(&bus->mdio_lock);
++ mt7530_mutex_unlock(priv);
+ }
+
+ static void
+@@ -264,13 +273,11 @@ mt7530_mii_read(struct mt7530_priv *priv
+ static void
+ mt7530_write(struct mt7530_priv *priv, u32 reg, u32 val)
+ {
+- struct mii_bus *bus = priv->bus;
+-
+- mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
++ mt7530_mutex_lock(priv);
+
+ mt7530_mii_write(priv, reg, val);
+
+- mutex_unlock(&bus->mdio_lock);
++ mt7530_mutex_unlock(priv);
+ }
+
+ static u32
+@@ -282,14 +289,13 @@ _mt7530_unlocked_read(struct mt7530_dumm
+ static u32
+ _mt7530_read(struct mt7530_dummy_poll *p)
+ {
+- struct mii_bus *bus = p->priv->bus;
+ u32 val;
+
+- mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
++ mt7530_mutex_lock(p->priv);
+
+ val = mt7530_mii_read(p->priv, p->reg);
+
+- mutex_unlock(&bus->mdio_lock);
++ mt7530_mutex_unlock(p->priv);
+
+ return val;
+ }
+@@ -307,13 +313,11 @@ static void
+ mt7530_rmw(struct mt7530_priv *priv, u32 reg,
+ u32 mask, u32 set)
+ {
+- struct mii_bus *bus = priv->bus;
+-
+- mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
++ mt7530_mutex_lock(priv);
+
+ regmap_update_bits(priv->regmap, reg, mask, set);
+
+- mutex_unlock(&bus->mdio_lock);
++ mt7530_mutex_unlock(priv);
+ }
+
+ static void
+@@ -645,14 +649,13 @@ static int
+ mt7531_ind_c45_phy_read(struct mt7530_priv *priv, int port, int devad,
+ int regnum)
+ {
+- struct mii_bus *bus = priv->bus;
+ struct mt7530_dummy_poll p;
+ u32 reg, val;
+ int ret;
+
+ INIT_MT7530_DUMMY_POLL(&p, priv, MT7531_PHY_IAC);
+
+- mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
++ mt7530_mutex_lock(priv);
+
+ ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val,
+ !(val & MT7531_PHY_ACS_ST), 20, 100000);
+@@ -685,7 +688,7 @@ mt7531_ind_c45_phy_read(struct mt7530_pr
+
+ ret = val & MT7531_MDIO_RW_DATA_MASK;
+ out:
+- mutex_unlock(&bus->mdio_lock);
++ mt7530_mutex_unlock(priv);
+
+ return ret;
+ }
+@@ -694,14 +697,13 @@ static int
+ mt7531_ind_c45_phy_write(struct mt7530_priv *priv, int port, int devad,
+ int regnum, u32 data)
+ {
+- struct mii_bus *bus = priv->bus;
+ struct mt7530_dummy_poll p;
+ u32 val, reg;
+ int ret;
+
+ INIT_MT7530_DUMMY_POLL(&p, priv, MT7531_PHY_IAC);
+
+- mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
++ mt7530_mutex_lock(priv);
+
+ ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val,
+ !(val & MT7531_PHY_ACS_ST), 20, 100000);
+@@ -733,7 +735,7 @@ mt7531_ind_c45_phy_write(struct mt7530_p
+ }
+
+ out:
+- mutex_unlock(&bus->mdio_lock);
++ mt7530_mutex_unlock(priv);
+
+ return ret;
+ }
+@@ -741,14 +743,13 @@ out:
+ static int
+ mt7531_ind_c22_phy_read(struct mt7530_priv *priv, int port, int regnum)
+ {
+- struct mii_bus *bus = priv->bus;
+ struct mt7530_dummy_poll p;
+ int ret;
+ u32 val;
+
+ INIT_MT7530_DUMMY_POLL(&p, priv, MT7531_PHY_IAC);
+
+- mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
++ mt7530_mutex_lock(priv);
+
+ ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val,
+ !(val & MT7531_PHY_ACS_ST), 20, 100000);
+@@ -771,7 +772,7 @@ mt7531_ind_c22_phy_read(struct mt7530_pr
+
+ ret = val & MT7531_MDIO_RW_DATA_MASK;
+ out:
+- mutex_unlock(&bus->mdio_lock);
++ mt7530_mutex_unlock(priv);
+
+ return ret;
+ }
+@@ -780,14 +781,13 @@ static int
+ mt7531_ind_c22_phy_write(struct mt7530_priv *priv, int port, int regnum,
+ u16 data)
+ {
+- struct mii_bus *bus = priv->bus;
+ struct mt7530_dummy_poll p;
+ int ret;
+ u32 reg;
+
+ INIT_MT7530_DUMMY_POLL(&p, priv, MT7531_PHY_IAC);
+
+- mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
++ mt7530_mutex_lock(priv);
+
+ ret = readx_poll_timeout(_mt7530_unlocked_read, &p, reg,
+ !(reg & MT7531_PHY_ACS_ST), 20, 100000);
+@@ -809,7 +809,7 @@ mt7531_ind_c22_phy_write(struct mt7530_p
+ }
+
+ out:
+- mutex_unlock(&bus->mdio_lock);
++ mt7530_mutex_unlock(priv);
+
+ return ret;
+ }
+@@ -1109,7 +1109,6 @@ static int
+ mt7530_port_change_mtu(struct dsa_switch *ds, int port, int new_mtu)
+ {
+ struct mt7530_priv *priv = ds->priv;
+- struct mii_bus *bus = priv->bus;
+ int length;
+ u32 val;
+
+@@ -1120,7 +1119,7 @@ mt7530_port_change_mtu(struct dsa_switch
+ if (!dsa_is_cpu_port(ds, port))
+ return 0;
+
+- mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
++ mt7530_mutex_lock(priv);
+
+ val = mt7530_mii_read(priv, MT7530_GMACCR);
+ val &= ~MAX_RX_PKT_LEN_MASK;
+@@ -1141,7 +1140,7 @@ mt7530_port_change_mtu(struct dsa_switch
+
+ mt7530_mii_write(priv, MT7530_GMACCR, val);
+
+- mutex_unlock(&bus->mdio_lock);
++ mt7530_mutex_unlock(priv);
+
+ return 0;
+ }
+@@ -1937,10 +1936,10 @@ mt7530_irq_thread_fn(int irq, void *dev_
+ u32 val;
+ int p;
+
+- mutex_lock_nested(&priv->bus->mdio_lock, MDIO_MUTEX_NESTED);
++ mt7530_mutex_lock(priv);
+ val = mt7530_mii_read(priv, MT7530_SYS_INT_STS);
+ mt7530_mii_write(priv, MT7530_SYS_INT_STS, val);
+- mutex_unlock(&priv->bus->mdio_lock);
++ mt7530_mutex_unlock(priv);
+
+ for (p = 0; p < MT7530_NUM_PHYS; p++) {
+ if (BIT(p) & val) {
+@@ -1976,7 +1975,7 @@ mt7530_irq_bus_lock(struct irq_data *d)
+ {
+ struct mt7530_priv *priv = irq_data_get_irq_chip_data(d);
+
+- mutex_lock_nested(&priv->bus->mdio_lock, MDIO_MUTEX_NESTED);
++ mt7530_mutex_lock(priv);
+ }
+
+ static void
+@@ -1985,7 +1984,7 @@ mt7530_irq_bus_sync_unlock(struct irq_da
+ struct mt7530_priv *priv = irq_data_get_irq_chip_data(d);
+
+ mt7530_mii_write(priv, MT7530_SYS_INT_EN, priv->irq_enable);
+- mutex_unlock(&priv->bus->mdio_lock);
++ mt7530_mutex_unlock(priv);
+ }
+
+ static struct irq_chip mt7530_irq_chip = {
diff --git a/target/linux/generic/backport-5.15/790-v6.4-0007-net-dsa-mt7530-move-p5_intf_modes-function-to-mt7530.patch b/target/linux/generic/backport-5.15/790-v6.4-0007-net-dsa-mt7530-move-p5_intf_modes-function-to-mt7530.patch
new file mode 100644
index 0000000000..bd7ca33f6e
--- /dev/null
+++ b/target/linux/generic/backport-5.15/790-v6.4-0007-net-dsa-mt7530-move-p5_intf_modes-function-to-mt7530.patch
@@ -0,0 +1,75 @@
+From 25d15dee34a1a40d5fd71636a205e3211f09fd1d Mon Sep 17 00:00:00 2001
+From: Daniel Golle <daniel at makrotopia.org>
+Date: Mon, 3 Apr 2023 02:18:28 +0100
+Subject: [PATCH 10/16] net: dsa: mt7530: move p5_intf_modes() function to
+ mt7530.c
+
+In preparation of splitting mt7530.c into a driver for MDIO-connected
+as well as MDIO-accessed built-in switches on one hand and MMIO-accessed
+built-in switches move the p5_inft_modes() function from mt7530.h to
+mt7530.c. The function is only needed there and will trigger a compiler
+warning about a defined but unused function otherwise when including
+mt7530.h in the to-be-introduced bus-specific drivers.
+
+Signed-off-by: Daniel Golle <daniel at makrotopia.org>
+Reviewed-by: Andrew Lunn <andrew at lunn.ch>
+Signed-off-by: David S. Miller <davem at davemloft.net>
+---
+ drivers/net/dsa/mt7530.c | 18 ++++++++++++++++++
+ drivers/net/dsa/mt7530.h | 18 ------------------
+ 2 files changed, 18 insertions(+), 18 deletions(-)
+
+--- a/drivers/net/dsa/mt7530.c
++++ b/drivers/net/dsa/mt7530.c
+@@ -950,6 +950,24 @@ mt7530_set_ageing_time(struct dsa_switch
+ return 0;
+ }
+
++static const char *p5_intf_modes(unsigned int p5_interface)
++{
++ switch (p5_interface) {
++ case P5_DISABLED:
++ return "DISABLED";
++ case P5_INTF_SEL_PHY_P0:
++ return "PHY P0";
++ case P5_INTF_SEL_PHY_P4:
++ return "PHY P4";
++ case P5_INTF_SEL_GMAC5:
++ return "GMAC5";
++ case P5_INTF_SEL_GMAC5_SGMII:
++ return "GMAC5_SGMII";
++ default:
++ return "unknown";
++ }
++}
++
+ static void mt7530_setup_port5(struct dsa_switch *ds, phy_interface_t interface)
+ {
+ struct mt7530_priv *priv = ds->priv;
+--- a/drivers/net/dsa/mt7530.h
++++ b/drivers/net/dsa/mt7530.h
+@@ -682,24 +682,6 @@ enum p5_interface_select {
+ P5_INTF_SEL_GMAC5_SGMII,
+ };
+
+-static const char *p5_intf_modes(unsigned int p5_interface)
+-{
+- switch (p5_interface) {
+- case P5_DISABLED:
+- return "DISABLED";
+- case P5_INTF_SEL_PHY_P0:
+- return "PHY P0";
+- case P5_INTF_SEL_PHY_P4:
+- return "PHY P4";
+- case P5_INTF_SEL_GMAC5:
+- return "GMAC5";
+- case P5_INTF_SEL_GMAC5_SGMII:
+- return "GMAC5_SGMII";
+- default:
+- return "unknown";
+- }
+-}
+-
+ struct mt7530_priv;
+
+ struct mt753x_pcs {
diff --git a/target/linux/generic/backport-5.15/790-v6.4-0008-net-dsa-mt7530-introduce-mt7530_probe_common-helper-.patch b/target/linux/generic/backport-5.15/790-v6.4-0008-net-dsa-mt7530-introduce-mt7530_probe_common-helper-.patch
new file mode 100644
index 0000000000..34a1bd7372
--- /dev/null
+++ b/target/linux/generic/backport-5.15/790-v6.4-0008-net-dsa-mt7530-introduce-mt7530_probe_common-helper-.patch
@@ -0,0 +1,155 @@
+From 37c9c0d8d0b2e24f8c9af72ecd4edd31537284d3 Mon Sep 17 00:00:00 2001
+From: Daniel Golle <daniel at makrotopia.org>
+Date: Mon, 3 Apr 2023 02:18:39 +0100
+Subject: [PATCH 11/16] net: dsa: mt7530: introduce mt7530_probe_common helper
+ function
+
+Move commonly used parts from mt7530_probe into new mt7530_probe_common
+helper function which will be used by both, mt7530_probe and the
+to-be-introduced mt7988_probe.
+
+Signed-off-by: Daniel Golle <daniel at makrotopia.org>
+Reviewed-by: Andrew Lunn <andrew at lunn.ch>
+Signed-off-by: David S. Miller <davem at davemloft.net>
+---
+ drivers/net/dsa/mt7530.c | 98 ++++++++++++++++++++++------------------
+ 1 file changed, 54 insertions(+), 44 deletions(-)
+
+--- a/drivers/net/dsa/mt7530.c
++++ b/drivers/net/dsa/mt7530.c
+@@ -3135,44 +3135,21 @@ static const struct of_device_id mt7530_
+ MODULE_DEVICE_TABLE(of, mt7530_of_match);
+
+ static int
+-mt7530_probe(struct mdio_device *mdiodev)
++mt7530_probe_common(struct mt7530_priv *priv)
+ {
+- static struct regmap_config *regmap_config;
+- struct mt7530_priv *priv;
+- struct device_node *dn;
+- int ret;
++ struct device *dev = priv->dev;
+
+- dn = mdiodev->dev.of_node;
+-
+- priv = devm_kzalloc(&mdiodev->dev, sizeof(*priv), GFP_KERNEL);
+- if (!priv)
+- return -ENOMEM;
+-
+- priv->ds = devm_kzalloc(&mdiodev->dev, sizeof(*priv->ds), GFP_KERNEL);
++ priv->ds = devm_kzalloc(dev, sizeof(*priv->ds), GFP_KERNEL);
+ if (!priv->ds)
+ return -ENOMEM;
+
+- priv->ds->dev = &mdiodev->dev;
++ priv->ds->dev = dev;
+ priv->ds->num_ports = MT7530_NUM_PORTS;
+
+- /* Use medatek,mcm property to distinguish hardware type that would
+- * casues a little bit differences on power-on sequence.
+- */
+- priv->mcm = of_property_read_bool(dn, "mediatek,mcm");
+- if (priv->mcm) {
+- dev_info(&mdiodev->dev, "MT7530 adapts as multi-chip module\n");
+-
+- priv->rstc = devm_reset_control_get(&mdiodev->dev, "mcm");
+- if (IS_ERR(priv->rstc)) {
+- dev_err(&mdiodev->dev, "Couldn't get our reset line\n");
+- return PTR_ERR(priv->rstc);
+- }
+- }
+-
+ /* Get the hardware identifier from the devicetree node.
+ * We will need it for some of the clock and regulator setup.
+ */
+- priv->info = of_device_get_match_data(&mdiodev->dev);
++ priv->info = of_device_get_match_data(dev);
+ if (!priv->info)
+ return -EINVAL;
+
+@@ -3186,23 +3163,53 @@ mt7530_probe(struct mdio_device *mdiodev
+ return -EINVAL;
+
+ priv->id = priv->info->id;
++ priv->dev = dev;
++ priv->ds->priv = priv;
++ priv->ds->ops = &mt7530_switch_ops;
++ mutex_init(&priv->reg_mutex);
++ dev_set_drvdata(dev, priv);
+
+- if (priv->id == ID_MT7530) {
+- priv->core_pwr = devm_regulator_get(&mdiodev->dev, "core");
+- if (IS_ERR(priv->core_pwr))
+- return PTR_ERR(priv->core_pwr);
++ return 0;
++}
+
+- priv->io_pwr = devm_regulator_get(&mdiodev->dev, "io");
+- if (IS_ERR(priv->io_pwr))
+- return PTR_ERR(priv->io_pwr);
+- }
++static int
++mt7530_probe(struct mdio_device *mdiodev)
++{
++ static struct regmap_config *regmap_config;
++ struct mt7530_priv *priv;
++ struct device_node *dn;
++ int ret;
++
++ dn = mdiodev->dev.of_node;
++
++ priv = devm_kzalloc(&mdiodev->dev, sizeof(*priv), GFP_KERNEL);
++ if (!priv)
++ return -ENOMEM;
+
+- /* Not MCM that indicates switch works as the remote standalone
++ priv->bus = mdiodev->bus;
++ priv->dev = &mdiodev->dev;
++
++ ret = mt7530_probe_common(priv);
++ if (ret)
++ return ret;
++
++ /* Use medatek,mcm property to distinguish hardware type that would
++ * cause a little bit differences on power-on sequence.
++ * Not MCM that indicates switch works as the remote standalone
+ * integrated circuit so the GPIO pin would be used to complete
+ * the reset, otherwise memory-mapped register accessing used
+ * through syscon provides in the case of MCM.
+ */
+- if (!priv->mcm) {
++ priv->mcm = of_property_read_bool(dn, "mediatek,mcm");
++ if (priv->mcm) {
++ dev_info(&mdiodev->dev, "MT7530 adapts as multi-chip module\n");
++
++ priv->rstc = devm_reset_control_get(&mdiodev->dev, "mcm");
++ if (IS_ERR(priv->rstc)) {
++ dev_err(&mdiodev->dev, "Couldn't get our reset line\n");
++ return PTR_ERR(priv->rstc);
++ }
++ } else {
+ priv->reset = devm_gpiod_get_optional(&mdiodev->dev, "reset",
+ GPIOD_OUT_LOW);
+ if (IS_ERR(priv->reset)) {
+@@ -3211,12 +3218,15 @@ mt7530_probe(struct mdio_device *mdiodev
+ }
+ }
+
+- priv->bus = mdiodev->bus;
+- priv->dev = &mdiodev->dev;
+- priv->ds->priv = priv;
+- priv->ds->ops = &mt7530_switch_ops;
+- mutex_init(&priv->reg_mutex);
+- dev_set_drvdata(&mdiodev->dev, priv);
++ if (priv->id == ID_MT7530) {
++ priv->core_pwr = devm_regulator_get(&mdiodev->dev, "core");
++ if (IS_ERR(priv->core_pwr))
++ return PTR_ERR(priv->core_pwr);
++
++ priv->io_pwr = devm_regulator_get(&mdiodev->dev, "io");
++ if (IS_ERR(priv->io_pwr))
++ return PTR_ERR(priv->io_pwr);
++ }
+
+ regmap_config = devm_kzalloc(&mdiodev->dev, sizeof(*regmap_config),
+ GFP_KERNEL);
diff --git a/target/linux/generic/backport-5.15/790-v6.4-0009-net-dsa-mt7530-introduce-mt7530_remove_common-helper.patch b/target/linux/generic/backport-5.15/790-v6.4-0009-net-dsa-mt7530-introduce-mt7530_remove_common-helper.patch
new file mode 100644
index 0000000000..2881365ec7
--- /dev/null
+++ b/target/linux/generic/backport-5.15/790-v6.4-0009-net-dsa-mt7530-introduce-mt7530_remove_common-helper.patch
@@ -0,0 +1,55 @@
+From 720d736351761574af02ed093658ab60de60576c Mon Sep 17 00:00:00 2001
+From: Daniel Golle <daniel at makrotopia.org>
+Date: Mon, 3 Apr 2023 02:18:50 +0100
+Subject: [PATCH 12/16] net: dsa: mt7530: introduce mt7530_remove_common helper
+ function
+
+Move commonly used parts from mt7530_remove into new
+mt7530_remove_common helper function which will be used by both,
+mt7530_remove and the to-be-introduced mt7988_remove.
+
+Signed-off-by: Daniel Golle <daniel at makrotopia.org>
+Reviewed-by: Andrew Lunn <andrew at lunn.ch>
+Signed-off-by: David S. Miller <davem at davemloft.net>
+---
+ drivers/net/dsa/mt7530.c | 18 ++++++++++++------
+ 1 file changed, 12 insertions(+), 6 deletions(-)
+
+--- a/drivers/net/dsa/mt7530.c
++++ b/drivers/net/dsa/mt7530.c
+@@ -3253,6 +3253,17 @@ mt7530_probe(struct mdio_device *mdiodev
+ }
+
+ static void
++mt7530_remove_common(struct mt7530_priv *priv)
++{
++ if (priv->irq)
++ mt7530_free_irq(priv);
++
++ dsa_unregister_switch(priv->ds);
++
++ mutex_destroy(&priv->reg_mutex);
++}
++
++static void
+ mt7530_remove(struct mdio_device *mdiodev)
+ {
+ struct mt7530_priv *priv = dev_get_drvdata(&mdiodev->dev);
+@@ -3271,16 +3282,11 @@ mt7530_remove(struct mdio_device *mdiode
+ dev_err(priv->dev, "Failed to disable io pwr: %d\n",
+ ret);
+
+- if (priv->irq)
+- mt7530_free_irq(priv);
+-
+- dsa_unregister_switch(priv->ds);
++ mt7530_remove_common(priv);
+
+ for (i = 0; i < 2; ++i)
+ mtk_pcs_lynxi_destroy(priv->ports[5 + i].sgmii_pcs);
+
+- mutex_destroy(&priv->reg_mutex);
+-
+ dev_set_drvdata(&mdiodev->dev, NULL);
+ }
+
diff --git a/target/linux/generic/backport-5.15/790-v6.4-0010-net-dsa-mt7530-split-off-common-parts-from-mt7531_se.patch b/target/linux/generic/backport-5.15/790-v6.4-0010-net-dsa-mt7530-split-off-common-parts-from-mt7531_se.patch
new file mode 100644
index 0000000000..c8e7d93026
--- /dev/null
+++ b/target/linux/generic/backport-5.15/790-v6.4-0010-net-dsa-mt7530-split-off-common-parts-from-mt7531_se.patch
@@ -0,0 +1,143 @@
+From 7f54cc9772ced2d76ac11832f0ada43798443ac9 Mon Sep 17 00:00:00 2001
+From: Daniel Golle <daniel at makrotopia.org>
+Date: Mon, 3 Apr 2023 02:19:02 +0100
+Subject: [PATCH 13/16] net: dsa: mt7530: split-off common parts from
+ mt7531_setup
+
+MT7988 shares a significant part of the setup function with MT7531.
+Split-off those parts into a shared function which is going to be used
+also by mt7988_setup.
+
+Signed-off-by: Daniel Golle <daniel at makrotopia.org>
+Reviewed-by: Andrew Lunn <andrew at lunn.ch>
+Signed-off-by: David S. Miller <davem at davemloft.net>
+---
+ drivers/net/dsa/mt7530.c | 99 ++++++++++++++++++++++------------------
+ 1 file changed, 55 insertions(+), 44 deletions(-)
+
+--- a/drivers/net/dsa/mt7530.c
++++ b/drivers/net/dsa/mt7530.c
+@@ -2348,11 +2348,64 @@ mt7530_setup(struct dsa_switch *ds)
+ }
+
+ static int
++mt7531_setup_common(struct dsa_switch *ds)
++{
++ struct mt7530_priv *priv = ds->priv;
++ struct dsa_port *cpu_dp;
++ int ret, i;
++
++ /* BPDU to CPU port */
++ dsa_switch_for_each_cpu_port(cpu_dp, ds) {
++ mt7530_rmw(priv, MT7531_CFC, MT7531_CPU_PMAP_MASK,
++ BIT(cpu_dp->index));
++ break;
++ }
++ mt7530_rmw(priv, MT753X_BPC, MT753X_BPDU_PORT_FW_MASK,
++ MT753X_BPDU_CPU_ONLY);
++
++ /* Enable and reset MIB counters */
++ mt7530_mib_reset(ds);
++
++ for (i = 0; i < MT7530_NUM_PORTS; i++) {
++ /* Disable forwarding by default on all ports */
++ mt7530_rmw(priv, MT7530_PCR_P(i), PCR_MATRIX_MASK,
++ PCR_MATRIX_CLR);
++
++ /* Disable learning by default on all ports */
++ mt7530_set(priv, MT7530_PSC_P(i), SA_DIS);
++
++ mt7530_set(priv, MT7531_DBG_CNT(i), MT7531_DIS_CLR);
++
++ if (dsa_is_cpu_port(ds, i)) {
++ ret = mt753x_cpu_port_enable(ds, i);
++ if (ret)
++ return ret;
++ } else {
++ mt7530_port_disable(ds, i);
++
++ /* Set default PVID to 0 on all user ports */
++ mt7530_rmw(priv, MT7530_PPBV1_P(i), G0_PORT_VID_MASK,
++ G0_PORT_VID_DEF);
++ }
++
++ /* Enable consistent egress tag */
++ mt7530_rmw(priv, MT7530_PVC_P(i), PVC_EG_TAG_MASK,
++ PVC_EG_TAG(MT7530_VLAN_EG_CONSISTENT));
++ }
++
++ /* Flush the FDB table */
++ ret = mt7530_fdb_cmd(priv, MT7530_FDB_FLUSH, NULL);
++ if (ret < 0)
++ return ret;
++
++ return 0;
++}
++
++static int
+ mt7531_setup(struct dsa_switch *ds)
+ {
+ struct mt7530_priv *priv = ds->priv;
+ struct mt7530_dummy_poll p;
+- struct dsa_port *cpu_dp;
+ u32 val, id;
+ int ret, i;
+
+@@ -2426,44 +2479,7 @@ mt7531_setup(struct dsa_switch *ds)
+ mt7531_ind_c45_phy_write(priv, MT753X_CTRL_PHY_ADDR, MDIO_MMD_VEND2,
+ CORE_PLL_GROUP4, val);
+
+- /* BPDU to CPU port */
+- dsa_switch_for_each_cpu_port(cpu_dp, ds) {
+- mt7530_rmw(priv, MT7531_CFC, MT7531_CPU_PMAP_MASK,
+- BIT(cpu_dp->index));
+- break;
+- }
+- mt7530_rmw(priv, MT753X_BPC, MT753X_BPDU_PORT_FW_MASK,
+- MT753X_BPDU_CPU_ONLY);
+-
+- /* Enable and reset MIB counters */
+- mt7530_mib_reset(ds);
+-
+- for (i = 0; i < MT7530_NUM_PORTS; i++) {
+- /* Disable forwarding by default on all ports */
+- mt7530_rmw(priv, MT7530_PCR_P(i), PCR_MATRIX_MASK,
+- PCR_MATRIX_CLR);
+-
+- /* Disable learning by default on all ports */
+- mt7530_set(priv, MT7530_PSC_P(i), SA_DIS);
+-
+- mt7530_set(priv, MT7531_DBG_CNT(i), MT7531_DIS_CLR);
+-
+- if (dsa_is_cpu_port(ds, i)) {
+- ret = mt753x_cpu_port_enable(ds, i);
+- if (ret)
+- return ret;
+- } else {
+- mt7530_port_disable(ds, i);
+-
+- /* Set default PVID to 0 on all user ports */
+- mt7530_rmw(priv, MT7530_PPBV1_P(i), G0_PORT_VID_MASK,
+- G0_PORT_VID_DEF);
+- }
+-
+- /* Enable consistent egress tag */
+- mt7530_rmw(priv, MT7530_PVC_P(i), PVC_EG_TAG_MASK,
+- PVC_EG_TAG(MT7530_VLAN_EG_CONSISTENT));
+- }
++ mt7531_setup_common(ds);
+
+ /* Setup VLAN ID 0 for VLAN-unaware bridges */
+ ret = mt7530_setup_vlan0(priv);
+@@ -2473,11 +2489,6 @@ mt7531_setup(struct dsa_switch *ds)
+ ds->assisted_learning_on_cpu_port = true;
+ ds->mtu_enforcement_ingress = true;
+
+- /* Flush the FDB table */
+- ret = mt7530_fdb_cmd(priv, MT7530_FDB_FLUSH, NULL);
+- if (ret < 0)
+- return ret;
+-
+ return 0;
+ }
+
diff --git a/target/linux/generic/backport-5.15/790-v6.4-0011-net-dsa-mt7530-introduce-separate-MDIO-driver.patch b/target/linux/generic/backport-5.15/790-v6.4-0011-net-dsa-mt7530-introduce-separate-MDIO-driver.patch
new file mode 100644
index 0000000000..96afa041aa
--- /dev/null
+++ b/target/linux/generic/backport-5.15/790-v6.4-0011-net-dsa-mt7530-introduce-separate-MDIO-driver.patch
@@ -0,0 +1,692 @@
+From cb675afcddbbeb2bfa6596e3bc236bc026cd425f Mon Sep 17 00:00:00 2001
+From: Daniel Golle <daniel at makrotopia.org>
+Date: Mon, 3 Apr 2023 02:19:13 +0100
+Subject: [PATCH 14/16] net: dsa: mt7530: introduce separate MDIO driver
+
+Split MT7530 switch driver into a common part and a part specific
+for MDIO connected switches and multi-chip modules.
+Move MDIO-specific functions to newly introduced mt7530-mdio.c while
+keeping the common parts in mt7530.c.
+Introduce new Kconfig symbol CONFIG_NET_DSA_MT7530_MDIO which is
+implied by CONFIG_NET_DSA_MT7530.
+
+Signed-off-by: Daniel Golle <daniel at makrotopia.org>
+Reviewed-by: Andrew Lunn <andrew at lunn.ch>
+Signed-off-by: David S. Miller <davem at davemloft.net>
+---
+ MAINTAINERS | 1 +
+ drivers/net/dsa/Kconfig | 15 +-
+ drivers/net/dsa/Makefile | 1 +
+ drivers/net/dsa/mt7530-mdio.c | 271 ++++++++++++++++++++++++++++++++++
+ drivers/net/dsa/mt7530.c | 264 +--------------------------------
+ drivers/net/dsa/mt7530.h | 6 +
+ 6 files changed, 300 insertions(+), 258 deletions(-)
+ create mode 100644 drivers/net/dsa/mt7530-mdio.c
+
+--- a/MAINTAINERS
++++ b/MAINTAINERS
+@@ -11901,6 +11901,7 @@ M: Landen Chao <Landen.Chao at mediatek.com
+ M: DENG Qingfang <dqfext at gmail.com>
+ L: netdev at vger.kernel.org
+ S: Maintained
++F: drivers/net/dsa/mt7530-mdio.c
+ F: drivers/net/dsa/mt7530.*
+ F: net/dsa/tag_mtk.c
+
+--- a/drivers/net/dsa/Kconfig
++++ b/drivers/net/dsa/Kconfig
+@@ -37,10 +37,22 @@ config NET_DSA_MT7530
+ tristate "MediaTek MT753x and MT7621 Ethernet switch support"
+ select NET_DSA_TAG_MTK
+ select MEDIATEK_GE_PHY
++ imply NET_DSA_MT7530_MDIO
++ help
++ This enables support for the MediaTek MT7530 and MT7531 Ethernet
++ switch chips. Multi-chip module MT7530 in MT7621AT, MT7621DAT,
++ MT7621ST and MT7623AI SoCs, and built-in switch in MT7988 SoC are
++ supported as well.
++
++config NET_DSA_MT7530_MDIO
++ tristate "MediaTek MT7530 MDIO interface driver"
++ depends on NET_DSA_MT7530
+ select PCS_MTK_LYNXI
+ help
+- This enables support for the MediaTek MT7530, MT7531, and MT7621
+- Ethernet switch chips.
++ This enables support for the MediaTek MT7530 and MT7531 switch
++ chips which are connected via MDIO, as well as multi-chip
++ module MT7530 which can be found in the MT7621AT, MT7621DAT,
++ MT7621ST and MT7623AI SoCs.
+
+ config NET_DSA_MV88E6060
+ tristate "Marvell 88E6060 ethernet switch chip support"
+--- a/drivers/net/dsa/Makefile
++++ b/drivers/net/dsa/Makefile
+@@ -7,6 +7,7 @@ obj-$(CONFIG_FIXED_PHY) += dsa_loop_bdi
+ endif
+ obj-$(CONFIG_NET_DSA_LANTIQ_GSWIP) += lantiq_gswip.o
+ obj-$(CONFIG_NET_DSA_MT7530) += mt7530.o
++obj-$(CONFIG_NET_DSA_MT7530_MDIO) += mt7530-mdio.o
+ obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o
+ obj-$(CONFIG_NET_DSA_REALTEK_SMI) += realtek-smi.o
+ realtek-smi-objs := realtek-smi-core.o rtl8366.o rtl8366rb.o
+--- /dev/null
++++ b/drivers/net/dsa/mt7530-mdio.c
+@@ -0,0 +1,271 @@
++// SPDX-License-Identifier: GPL-2.0-only
++
++#include <linux/gpio/consumer.h>
++#include <linux/mdio.h>
++#include <linux/module.h>
++#include <linux/pcs/pcs-mtk-lynxi.h>
++#include <linux/of_irq.h>
++#include <linux/of_mdio.h>
++#include <linux/of_net.h>
++#include <linux/of_platform.h>
++#include <linux/regmap.h>
++#include <linux/reset.h>
++#include <linux/regulator/consumer.h>
++#include <net/dsa.h>
++
++#include "mt7530.h"
++
++static int
++mt7530_regmap_write(void *context, unsigned int reg, unsigned int val)
++{
++ struct mii_bus *bus = context;
++ u16 page, r, lo, hi;
++ int ret;
++
++ page = (reg >> 6) & 0x3ff;
++ r = (reg >> 2) & 0xf;
++ lo = val & 0xffff;
++ hi = val >> 16;
++
++ /* MT7530 uses 31 as the pseudo port */
++ ret = bus->write(bus, 0x1f, 0x1f, page);
++ if (ret < 0)
++ return ret;
++
++ ret = bus->write(bus, 0x1f, r, lo);
++ if (ret < 0)
++ return ret;
++
++ ret = bus->write(bus, 0x1f, 0x10, hi);
++ return ret;
++}
++
++static int
++mt7530_regmap_read(void *context, unsigned int reg, unsigned int *val)
++{
++ struct mii_bus *bus = context;
++ u16 page, r, lo, hi;
++ int ret;
++
++ page = (reg >> 6) & 0x3ff;
++ r = (reg >> 2) & 0xf;
++
++ /* MT7530 uses 31 as the pseudo port */
++ ret = bus->write(bus, 0x1f, 0x1f, page);
++ if (ret < 0)
++ return ret;
++
++ lo = bus->read(bus, 0x1f, r);
++ hi = bus->read(bus, 0x1f, 0x10);
++
++ *val = (hi << 16) | (lo & 0xffff);
++
++ return 0;
++}
++
++static void
++mt7530_mdio_regmap_lock(void *mdio_lock)
++{
++ mutex_lock_nested(mdio_lock, MDIO_MUTEX_NESTED);
++}
++
++static void
++mt7530_mdio_regmap_unlock(void *mdio_lock)
++{
++ mutex_unlock(mdio_lock);
++}
++
++static const struct regmap_bus mt7530_regmap_bus = {
++ .reg_write = mt7530_regmap_write,
++ .reg_read = mt7530_regmap_read,
++};
++
++static int
++mt7531_create_sgmii(struct mt7530_priv *priv)
++{
++ struct regmap_config *mt7531_pcs_config[2];
++ struct phylink_pcs *pcs;
++ struct regmap *regmap;
++ int i, ret = 0;
++
++ for (i = 0; i < 2; i++) {
++ mt7531_pcs_config[i] = devm_kzalloc(priv->dev,
++ sizeof(struct regmap_config),
++ GFP_KERNEL);
++ if (!mt7531_pcs_config[i]) {
++ ret = -ENOMEM;
++ break;
++ }
++
++ mt7531_pcs_config[i]->name = i ? "port6" : "port5";
++ mt7531_pcs_config[i]->reg_bits = 16;
++ mt7531_pcs_config[i]->val_bits = 32;
++ mt7531_pcs_config[i]->reg_stride = 4;
++ mt7531_pcs_config[i]->reg_base = MT7531_SGMII_REG_BASE(5 + i);
++ mt7531_pcs_config[i]->max_register = 0x17c;
++ mt7531_pcs_config[i]->lock = mt7530_mdio_regmap_lock;
++ mt7531_pcs_config[i]->unlock = mt7530_mdio_regmap_unlock;
++ mt7531_pcs_config[i]->lock_arg = &priv->bus->mdio_lock;
++
++ regmap = devm_regmap_init(priv->dev,
++ &mt7530_regmap_bus, priv->bus,
++ mt7531_pcs_config[i]);
++ if (IS_ERR(regmap)) {
++ ret = PTR_ERR(regmap);
++ break;
++ }
++ pcs = mtk_pcs_lynxi_create(priv->dev, regmap,
++ MT7531_PHYA_CTRL_SIGNAL3, 0);
++ if (!pcs) {
++ ret = -ENXIO;
++ break;
++ }
++ priv->ports[5 + i].sgmii_pcs = pcs;
++ }
++
++ if (ret && i)
++ mtk_pcs_lynxi_destroy(priv->ports[5].sgmii_pcs);
++
++ return ret;
++}
++
++static const struct of_device_id mt7530_of_match[] = {
++ { .compatible = "mediatek,mt7621", .data = &mt753x_table[ID_MT7621], },
++ { .compatible = "mediatek,mt7530", .data = &mt753x_table[ID_MT7530], },
++ { .compatible = "mediatek,mt7531", .data = &mt753x_table[ID_MT7531], },
++ { /* sentinel */ },
++};
++MODULE_DEVICE_TABLE(of, mt7530_of_match);
++
++static int
++mt7530_probe(struct mdio_device *mdiodev)
++{
++ static struct regmap_config *regmap_config;
++ struct mt7530_priv *priv;
++ struct device_node *dn;
++ int ret;
++
++ dn = mdiodev->dev.of_node;
++
++ priv = devm_kzalloc(&mdiodev->dev, sizeof(*priv), GFP_KERNEL);
++ if (!priv)
++ return -ENOMEM;
++
++ priv->bus = mdiodev->bus;
++ priv->dev = &mdiodev->dev;
++
++ ret = mt7530_probe_common(priv);
++ if (ret)
++ return ret;
++
++ /* Use medatek,mcm property to distinguish hardware type that would
++ * cause a little bit differences on power-on sequence.
++ * Not MCM that indicates switch works as the remote standalone
++ * integrated circuit so the GPIO pin would be used to complete
++ * the reset, otherwise memory-mapped register accessing used
++ * through syscon provides in the case of MCM.
++ */
++ priv->mcm = of_property_read_bool(dn, "mediatek,mcm");
++ if (priv->mcm) {
++ dev_info(&mdiodev->dev, "MT7530 adapts as multi-chip module\n");
++
++ priv->rstc = devm_reset_control_get(&mdiodev->dev, "mcm");
++ if (IS_ERR(priv->rstc)) {
++ dev_err(&mdiodev->dev, "Couldn't get our reset line\n");
++ return PTR_ERR(priv->rstc);
++ }
++ } else {
++ priv->reset = devm_gpiod_get_optional(&mdiodev->dev, "reset",
++ GPIOD_OUT_LOW);
++ if (IS_ERR(priv->reset)) {
++ dev_err(&mdiodev->dev, "Couldn't get our reset line\n");
++ return PTR_ERR(priv->reset);
++ }
++ }
++
++ if (priv->id == ID_MT7530) {
++ priv->core_pwr = devm_regulator_get(&mdiodev->dev, "core");
++ if (IS_ERR(priv->core_pwr))
++ return PTR_ERR(priv->core_pwr);
++
++ priv->io_pwr = devm_regulator_get(&mdiodev->dev, "io");
++ if (IS_ERR(priv->io_pwr))
++ return PTR_ERR(priv->io_pwr);
++ }
++
++ regmap_config = devm_kzalloc(&mdiodev->dev, sizeof(*regmap_config),
++ GFP_KERNEL);
++ if (!regmap_config)
++ return -ENOMEM;
++
++ regmap_config->reg_bits = 16;
++ regmap_config->val_bits = 32;
++ regmap_config->reg_stride = 4;
++ regmap_config->max_register = MT7530_CREV;
++ regmap_config->disable_locking = true;
++ priv->regmap = devm_regmap_init(priv->dev, &mt7530_regmap_bus,
++ priv->bus, regmap_config);
++ if (IS_ERR(priv->regmap))
++ return PTR_ERR(priv->regmap);
++
++ if (priv->id == ID_MT7531) {
++ ret = mt7531_create_sgmii(priv);
++ if (ret)
++ return ret;
++ }
++
++ return dsa_register_switch(priv->ds);
++}
++
++static void
++mt7530_remove(struct mdio_device *mdiodev)
++{
++ struct mt7530_priv *priv = dev_get_drvdata(&mdiodev->dev);
++ int ret = 0, i;
++
++ if (!priv)
++ return;
++
++ ret = regulator_disable(priv->core_pwr);
++ if (ret < 0)
++ dev_err(priv->dev,
++ "Failed to disable core power: %d\n", ret);
++
++ ret = regulator_disable(priv->io_pwr);
++ if (ret < 0)
++ dev_err(priv->dev, "Failed to disable io pwr: %d\n",
++ ret);
++
++ mt7530_remove_common(priv);
++
++ for (i = 0; i < 2; ++i)
++ mtk_pcs_lynxi_destroy(priv->ports[5 + i].sgmii_pcs);
++}
++
++static void mt7530_shutdown(struct mdio_device *mdiodev)
++{
++ struct mt7530_priv *priv = dev_get_drvdata(&mdiodev->dev);
++
++ if (!priv)
++ return;
++
++ dsa_switch_shutdown(priv->ds);
++
++ dev_set_drvdata(&mdiodev->dev, NULL);
++}
++
++static struct mdio_driver mt7530_mdio_driver = {
++ .probe = mt7530_probe,
++ .remove = mt7530_remove,
++ .shutdown = mt7530_shutdown,
++ .mdiodrv.driver = {
++ .name = "mt7530-mdio",
++ .of_match_table = mt7530_of_match,
++ },
++};
++
++mdio_module_driver(mt7530_mdio_driver);
++
++MODULE_AUTHOR("Sean Wang <sean.wang at mediatek.com>");
++MODULE_DESCRIPTION("Driver for Mediatek MT7530 Switch (MDIO)");
++MODULE_LICENSE("GPL");
+--- a/drivers/net/dsa/mt7530.c
++++ b/drivers/net/dsa/mt7530.c
+@@ -14,7 +14,6 @@
+ #include <linux/of_mdio.h>
+ #include <linux/of_net.h>
+ #include <linux/of_platform.h>
+-#include <linux/pcs/pcs-mtk-lynxi.h>
+ #include <linux/phylink.h>
+ #include <linux/regmap.h>
+ #include <linux/regulator/consumer.h>
+@@ -192,31 +191,6 @@ core_clear(struct mt7530_priv *priv, u32
+ }
+
+ static int
+-mt7530_regmap_write(void *context, unsigned int reg, unsigned int val)
+-{
+- struct mii_bus *bus = context;
+- u16 page, r, lo, hi;
+- int ret;
+-
+- page = (reg >> 6) & 0x3ff;
+- r = (reg >> 2) & 0xf;
+- lo = val & 0xffff;
+- hi = val >> 16;
+-
+- /* MT7530 uses 31 as the pseudo port */
+- ret = bus->write(bus, 0x1f, 0x1f, page);
+- if (ret < 0)
+- return ret;
+-
+- ret = bus->write(bus, 0x1f, r, lo);
+- if (ret < 0)
+- return ret;
+-
+- ret = bus->write(bus, 0x1f, 0x10, hi);
+- return ret;
+-}
+-
+-static int
+ mt7530_mii_write(struct mt7530_priv *priv, u32 reg, u32 val)
+ {
+ int ret;
+@@ -230,29 +204,6 @@ mt7530_mii_write(struct mt7530_priv *pri
+ return ret;
+ }
+
+-static int
+-mt7530_regmap_read(void *context, unsigned int reg, unsigned int *val)
+-{
+- struct mii_bus *bus = context;
+- u16 page, r, lo, hi;
+- int ret;
+-
+- page = (reg >> 6) & 0x3ff;
+- r = (reg >> 2) & 0xf;
+-
+- /* MT7530 uses 31 as the pseudo port */
+- ret = bus->write(bus, 0x1f, 0x1f, page);
+- if (ret < 0)
+- return ret;
+-
+- lo = bus->read(bus, 0x1f, r);
+- hi = bus->read(bus, 0x1f, 0x10);
+-
+- *val = (hi << 16) | (lo & 0xffff);
+-
+- return 0;
+-}
+-
+ static u32
+ mt7530_mii_read(struct mt7530_priv *priv, u32 reg)
+ {
+@@ -2944,72 +2895,6 @@ static const struct phylink_pcs_ops mt75
+ .pcs_an_restart = mt7530_pcs_an_restart,
+ };
+
+-static void
+-mt7530_mdio_regmap_lock(void *mdio_lock)
+-{
+- mutex_lock_nested(mdio_lock, MDIO_MUTEX_NESTED);
+-}
+-
+-static void
+-mt7530_mdio_regmap_unlock(void *mdio_lock)
+-{
+- mutex_unlock(mdio_lock);
+-}
+-
+-static const struct regmap_bus mt7530_regmap_bus = {
+- .reg_write = mt7530_regmap_write,
+- .reg_read = mt7530_regmap_read,
+-};
+-
+-static int
+-mt7531_create_sgmii(struct mt7530_priv *priv)
+-{
+- struct regmap_config *mt7531_pcs_config[2];
+- struct phylink_pcs *pcs;
+- struct regmap *regmap;
+- int i, ret = 0;
+-
+- for (i = 0; i < 2; i++) {
+- mt7531_pcs_config[i] = devm_kzalloc(priv->dev,
+- sizeof(struct regmap_config),
+- GFP_KERNEL);
+- if (!mt7531_pcs_config[i]) {
+- ret = -ENOMEM;
+- break;
+- }
+-
+- mt7531_pcs_config[i]->name = i ? "port6" : "port5";
+- mt7531_pcs_config[i]->reg_bits = 16;
+- mt7531_pcs_config[i]->val_bits = 32;
+- mt7531_pcs_config[i]->reg_stride = 4;
+- mt7531_pcs_config[i]->reg_base = MT7531_SGMII_REG_BASE(5 + i);
+- mt7531_pcs_config[i]->max_register = 0x17c;
+- mt7531_pcs_config[i]->lock = mt7530_mdio_regmap_lock;
+- mt7531_pcs_config[i]->unlock = mt7530_mdio_regmap_unlock;
+- mt7531_pcs_config[i]->lock_arg = &priv->bus->mdio_lock;
+-
+- regmap = devm_regmap_init(priv->dev,
+- &mt7530_regmap_bus, priv->bus,
+- mt7531_pcs_config[i]);
+- if (IS_ERR(regmap)) {
+- ret = PTR_ERR(regmap);
+- break;
+- }
+- pcs = mtk_pcs_lynxi_create(priv->dev, regmap,
+- MT7531_PHYA_CTRL_SIGNAL3, 0);
+- if (!pcs) {
+- ret = -ENXIO;
+- break;
+- }
+- priv->ports[5 + i].sgmii_pcs = pcs;
+- }
+-
+- if (ret && i)
+- mtk_pcs_lynxi_destroy(priv->ports[5].sgmii_pcs);
+-
+- return ret;
+-}
+-
+ static int
+ mt753x_setup(struct dsa_switch *ds)
+ {
+@@ -3068,7 +2953,7 @@ static int mt753x_set_mac_eee(struct dsa
+ return 0;
+ }
+
+-static const struct dsa_switch_ops mt7530_switch_ops = {
++const struct dsa_switch_ops mt7530_switch_ops = {
+ .get_tag_protocol = mtk_get_tag_protocol,
+ .setup = mt753x_setup,
+ .get_strings = mt7530_get_strings,
+@@ -3102,8 +2987,9 @@ static const struct dsa_switch_ops mt753
+ .get_mac_eee = mt753x_get_mac_eee,
+ .set_mac_eee = mt753x_set_mac_eee,
+ };
++EXPORT_SYMBOL_GPL(mt7530_switch_ops);
+
+-static const struct mt753x_info mt753x_table[] = {
++const struct mt753x_info mt753x_table[] = {
+ [ID_MT7621] = {
+ .id = ID_MT7621,
+ .pcs_ops = &mt7530_pcs_ops,
+@@ -3136,16 +3022,9 @@ static const struct mt753x_info mt753x_t
+ .mac_port_config = mt7531_mac_config,
+ },
+ };
++EXPORT_SYMBOL_GPL(mt753x_table);
+
+-static const struct of_device_id mt7530_of_match[] = {
+- { .compatible = "mediatek,mt7621", .data = &mt753x_table[ID_MT7621], },
+- { .compatible = "mediatek,mt7530", .data = &mt753x_table[ID_MT7530], },
+- { .compatible = "mediatek,mt7531", .data = &mt753x_table[ID_MT7531], },
+- { /* sentinel */ },
+-};
+-MODULE_DEVICE_TABLE(of, mt7530_of_match);
+-
+-static int
++int
+ mt7530_probe_common(struct mt7530_priv *priv)
+ {
+ struct device *dev = priv->dev;
+@@ -3182,88 +3061,9 @@ mt7530_probe_common(struct mt7530_priv *
+
+ return 0;
+ }
++EXPORT_SYMBOL_GPL(mt7530_probe_common);
+
+-static int
+-mt7530_probe(struct mdio_device *mdiodev)
+-{
+- static struct regmap_config *regmap_config;
+- struct mt7530_priv *priv;
+- struct device_node *dn;
+- int ret;
+-
+- dn = mdiodev->dev.of_node;
+-
+- priv = devm_kzalloc(&mdiodev->dev, sizeof(*priv), GFP_KERNEL);
+- if (!priv)
+- return -ENOMEM;
+-
+- priv->bus = mdiodev->bus;
+- priv->dev = &mdiodev->dev;
+-
+- ret = mt7530_probe_common(priv);
+- if (ret)
+- return ret;
+-
+- /* Use medatek,mcm property to distinguish hardware type that would
+- * cause a little bit differences on power-on sequence.
+- * Not MCM that indicates switch works as the remote standalone
+- * integrated circuit so the GPIO pin would be used to complete
+- * the reset, otherwise memory-mapped register accessing used
+- * through syscon provides in the case of MCM.
+- */
+- priv->mcm = of_property_read_bool(dn, "mediatek,mcm");
+- if (priv->mcm) {
+- dev_info(&mdiodev->dev, "MT7530 adapts as multi-chip module\n");
+-
+- priv->rstc = devm_reset_control_get(&mdiodev->dev, "mcm");
+- if (IS_ERR(priv->rstc)) {
+- dev_err(&mdiodev->dev, "Couldn't get our reset line\n");
+- return PTR_ERR(priv->rstc);
+- }
+- } else {
+- priv->reset = devm_gpiod_get_optional(&mdiodev->dev, "reset",
+- GPIOD_OUT_LOW);
+- if (IS_ERR(priv->reset)) {
+- dev_err(&mdiodev->dev, "Couldn't get our reset line\n");
+- return PTR_ERR(priv->reset);
+- }
+- }
+-
+- if (priv->id == ID_MT7530) {
+- priv->core_pwr = devm_regulator_get(&mdiodev->dev, "core");
+- if (IS_ERR(priv->core_pwr))
+- return PTR_ERR(priv->core_pwr);
+-
+- priv->io_pwr = devm_regulator_get(&mdiodev->dev, "io");
+- if (IS_ERR(priv->io_pwr))
+- return PTR_ERR(priv->io_pwr);
+- }
+-
+- regmap_config = devm_kzalloc(&mdiodev->dev, sizeof(*regmap_config),
+- GFP_KERNEL);
+- if (!regmap_config)
+- return -ENOMEM;
+-
+- regmap_config->reg_bits = 16;
+- regmap_config->val_bits = 32;
+- regmap_config->reg_stride = 4;
+- regmap_config->max_register = MT7530_CREV;
+- regmap_config->disable_locking = true;
+- priv->regmap = devm_regmap_init(priv->dev, &mt7530_regmap_bus,
+- priv->bus, regmap_config);
+- if (IS_ERR(priv->regmap))
+- return PTR_ERR(priv->regmap);
+-
+- if (priv->id == ID_MT7531) {
+- ret = mt7531_create_sgmii(priv);
+- if (ret)
+- return ret;
+- }
+-
+- return dsa_register_switch(priv->ds);
+-}
+-
+-static void
++void
+ mt7530_remove_common(struct mt7530_priv *priv)
+ {
+ if (priv->irq)
+@@ -3274,57 +3074,6 @@ mt7530_remove_common(struct mt7530_priv
+ mutex_destroy(&priv->reg_mutex);
+ }
+
+-static void
+-mt7530_remove(struct mdio_device *mdiodev)
+-{
+- struct mt7530_priv *priv = dev_get_drvdata(&mdiodev->dev);
+- int ret = 0, i;
+-
+- if (!priv)
+- return;
+-
+- ret = regulator_disable(priv->core_pwr);
+- if (ret < 0)
+- dev_err(priv->dev,
+- "Failed to disable core power: %d\n", ret);
+-
+- ret = regulator_disable(priv->io_pwr);
+- if (ret < 0)
+- dev_err(priv->dev, "Failed to disable io pwr: %d\n",
+- ret);
+-
+- mt7530_remove_common(priv);
+-
+- for (i = 0; i < 2; ++i)
+- mtk_pcs_lynxi_destroy(priv->ports[5 + i].sgmii_pcs);
+-
+- dev_set_drvdata(&mdiodev->dev, NULL);
+-}
+-
+-static void mt7530_shutdown(struct mdio_device *mdiodev)
+-{
+- struct mt7530_priv *priv = dev_get_drvdata(&mdiodev->dev);
+-
+- if (!priv)
+- return;
+-
+- dsa_switch_shutdown(priv->ds);
+-
+- dev_set_drvdata(&mdiodev->dev, NULL);
+-}
+-
+-static struct mdio_driver mt7530_mdio_driver = {
+- .probe = mt7530_probe,
+- .remove = mt7530_remove,
+- .shutdown = mt7530_shutdown,
+- .mdiodrv.driver = {
+- .name = "mt7530",
+- .of_match_table = mt7530_of_match,
+- },
+-};
+-
+-mdio_module_driver(mt7530_mdio_driver);
+-
+ MODULE_AUTHOR("Sean Wang <sean.wang at mediatek.com>");
+ MODULE_DESCRIPTION("Driver for Mediatek MT7530 Switch");
+ MODULE_LICENSE("GPL");
+--- a/drivers/net/dsa/mt7530.h
++++ b/drivers/net/dsa/mt7530.h
+@@ -807,4 +807,10 @@ static inline void INIT_MT7530_DUMMY_POL
+ p->reg = reg;
+ }
+
++int mt7530_probe_common(struct mt7530_priv *priv);
++void mt7530_remove_common(struct mt7530_priv *priv);
++
++extern const struct dsa_switch_ops mt7530_switch_ops;
++extern const struct mt753x_info mt753x_table[];
++
+ #endif /* __MT7530_H */
diff --git a/target/linux/generic/backport-5.15/790-v6.4-0012-net-dsa-mt7530-skip-locking-if-MDIO-bus-isn-t-presen.patch b/target/linux/generic/backport-5.15/790-v6.4-0012-net-dsa-mt7530-skip-locking-if-MDIO-bus-isn-t-presen.patch
new file mode 100644
index 0000000000..95b7cc6afe
--- /dev/null
+++ b/target/linux/generic/backport-5.15/790-v6.4-0012-net-dsa-mt7530-skip-locking-if-MDIO-bus-isn-t-presen.patch
@@ -0,0 +1,47 @@
+From 54d4147a121cec5004a673a58572da346e4458f8 Mon Sep 17 00:00:00 2001
+From: Daniel Golle <daniel at makrotopia.org>
+Date: Mon, 3 Apr 2023 02:19:28 +0100
+Subject: [PATCH 15/16] net: dsa: mt7530: skip locking if MDIO bus isn't
+ present
+
+As MT7530 and MT7531 internally use 32-bit wide registers, each access
+to any register of the switch requires several operations on the MDIO
+bus. Hence if there is congruent access, e.g. due to PCS or PHY
+polling, this can mess up and interfere with another ongoing register
+access sequence.
+
+However, the MDIO bus mutex is only relevant for MDIO-connected
+switches. Prepare switches which have there registers directly mapped
+into the SoCs register space via MMIO which do not require such
+locking. There we can simply use regmap's default locking mechanism.
+
+Hence guard mutex operations to only be performed in case of MDIO
+connected switches.
+
+Signed-off-by: Daniel Golle <daniel at makrotopia.org>
+Reviewed-by: Andrew Lunn <andrew at lunn.ch>
+Signed-off-by: David S. Miller <davem at davemloft.net>
+---
+ drivers/net/dsa/mt7530.c | 6 ++++--
+ 1 file changed, 4 insertions(+), 2 deletions(-)
+
+--- a/drivers/net/dsa/mt7530.c
++++ b/drivers/net/dsa/mt7530.c
+@@ -144,13 +144,15 @@ err:
+ static void
+ mt7530_mutex_lock(struct mt7530_priv *priv)
+ {
+- mutex_lock_nested(&priv->bus->mdio_lock, MDIO_MUTEX_NESTED);
++ if (priv->bus)
++ mutex_lock_nested(&priv->bus->mdio_lock, MDIO_MUTEX_NESTED);
+ }
+
+ static void
+ mt7530_mutex_unlock(struct mt7530_priv *priv)
+ {
+- mutex_unlock(&priv->bus->mdio_lock);
++ if (priv->bus)
++ mutex_unlock(&priv->bus->mdio_lock);
+ }
+
+ static void
diff --git a/target/linux/generic/backport-5.15/790-v6.4-0013-net-dsa-mt7530-introduce-driver-for-MT7988-built-in-.patch b/target/linux/generic/backport-5.15/790-v6.4-0013-net-dsa-mt7530-introduce-driver-for-MT7988-built-in-.patch
new file mode 100644
index 0000000000..8210aae27c
--- /dev/null
+++ b/target/linux/generic/backport-5.15/790-v6.4-0013-net-dsa-mt7530-introduce-driver-for-MT7988-built-in-.patch
@@ -0,0 +1,421 @@
+From 110c18bfed41421edd677935dd33be5e6507ba92 Mon Sep 17 00:00:00 2001
+From: Daniel Golle <daniel at makrotopia.org>
+Date: Mon, 3 Apr 2023 02:19:40 +0100
+Subject: [PATCH 16/16] net: dsa: mt7530: introduce driver for MT7988 built-in
+ switch
+
+Add driver for the built-in Gigabit Ethernet switch which can be found
+in the MediaTek MT7988 SoC.
+
+The switch shares most of its design with MT7530 and MT7531, but has
+it's registers mapped into the SoCs register space rather than being
+connected externally or internally via MDIO.
+
+Introduce a new platform driver to support that.
+
+Signed-off-by: Daniel Golle <daniel at makrotopia.org>
+Reviewed-by: Andrew Lunn <andrew at lunn.ch>
+Signed-off-by: David S. Miller <davem at davemloft.net>
+---
+ MAINTAINERS | 2 +
+ drivers/net/dsa/Kconfig | 12 +++
+ drivers/net/dsa/Makefile | 1 +
+ drivers/net/dsa/mt7530-mmio.c | 101 +++++++++++++++++++++++++
+ drivers/net/dsa/mt7530.c | 137 +++++++++++++++++++++++++++++++++-
+ drivers/net/dsa/mt7530.h | 12 +--
+ 6 files changed, 255 insertions(+), 10 deletions(-)
+ create mode 100644 drivers/net/dsa/mt7530-mmio.c
+
+--- a/MAINTAINERS
++++ b/MAINTAINERS
+@@ -11899,9 +11899,11 @@ MEDIATEK SWITCH DRIVER
+ M: Sean Wang <sean.wang at mediatek.com>
+ M: Landen Chao <Landen.Chao at mediatek.com>
+ M: DENG Qingfang <dqfext at gmail.com>
++M: Daniel Golle <daniel at makrotopia.org>
+ L: netdev at vger.kernel.org
+ S: Maintained
+ F: drivers/net/dsa/mt7530-mdio.c
++F: drivers/net/dsa/mt7530-mmio.c
+ F: drivers/net/dsa/mt7530.*
+ F: net/dsa/tag_mtk.c
+
+--- a/drivers/net/dsa/Kconfig
++++ b/drivers/net/dsa/Kconfig
+@@ -38,6 +38,7 @@ config NET_DSA_MT7530
+ select NET_DSA_TAG_MTK
+ select MEDIATEK_GE_PHY
+ imply NET_DSA_MT7530_MDIO
++ imply NET_DSA_MT7530_MMIO
+ help
+ This enables support for the MediaTek MT7530 and MT7531 Ethernet
+ switch chips. Multi-chip module MT7530 in MT7621AT, MT7621DAT,
+@@ -54,6 +55,17 @@ config NET_DSA_MT7530_MDIO
+ module MT7530 which can be found in the MT7621AT, MT7621DAT,
+ MT7621ST and MT7623AI SoCs.
+
++config NET_DSA_MT7530_MMIO
++ tristate "MediaTek MT7530 MMIO interface driver"
++ depends on NET_DSA_MT7530
++ depends on HAS_IOMEM
++ help
++ This enables support for the built-in Ethernet switch found
++ in the MediaTek MT7988 SoC.
++ The switch is a similar design as MT7531, but the switch registers
++ are directly mapped into the SoCs register space rather than being
++ accessible via MDIO.
++
+ config NET_DSA_MV88E6060
+ tristate "Marvell 88E6060 ethernet switch chip support"
+ select NET_DSA_TAG_TRAILER
+--- a/drivers/net/dsa/Makefile
++++ b/drivers/net/dsa/Makefile
+@@ -8,6 +8,7 @@ endif
+ obj-$(CONFIG_NET_DSA_LANTIQ_GSWIP) += lantiq_gswip.o
+ obj-$(CONFIG_NET_DSA_MT7530) += mt7530.o
+ obj-$(CONFIG_NET_DSA_MT7530_MDIO) += mt7530-mdio.o
++obj-$(CONFIG_NET_DSA_MT7530_MMIO) += mt7530-mmio.o
+ obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o
+ obj-$(CONFIG_NET_DSA_REALTEK_SMI) += realtek-smi.o
+ realtek-smi-objs := realtek-smi-core.o rtl8366.o rtl8366rb.o
+--- /dev/null
++++ b/drivers/net/dsa/mt7530-mmio.c
+@@ -0,0 +1,101 @@
++// SPDX-License-Identifier: GPL-2.0-only
++
++#include <linux/module.h>
++#include <linux/of_platform.h>
++#include <linux/regmap.h>
++#include <linux/regulator/consumer.h>
++#include <linux/reset.h>
++#include <net/dsa.h>
++
++#include "mt7530.h"
++
++static const struct of_device_id mt7988_of_match[] = {
++ { .compatible = "mediatek,mt7988-switch", .data = &mt753x_table[ID_MT7988], },
++ { /* sentinel */ },
++};
++MODULE_DEVICE_TABLE(of, mt7988_of_match);
++
++static int
++mt7988_probe(struct platform_device *pdev)
++{
++ static struct regmap_config *sw_regmap_config;
++ struct mt7530_priv *priv;
++ void __iomem *base_addr;
++ int ret;
++
++ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
++ if (!priv)
++ return -ENOMEM;
++
++ priv->bus = NULL;
++ priv->dev = &pdev->dev;
++
++ ret = mt7530_probe_common(priv);
++ if (ret)
++ return ret;
++
++ priv->rstc = devm_reset_control_get(&pdev->dev, NULL);
++ if (IS_ERR(priv->rstc)) {
++ dev_err(&pdev->dev, "Couldn't get our reset line\n");
++ return PTR_ERR(priv->rstc);
++ }
++
++ base_addr = devm_platform_ioremap_resource(pdev, 0);
++ if (IS_ERR(base_addr)) {
++ dev_err(&pdev->dev, "cannot request I/O memory space\n");
++ return -ENXIO;
++ }
++
++ sw_regmap_config = devm_kzalloc(&pdev->dev, sizeof(*sw_regmap_config), GFP_KERNEL);
++ if (!sw_regmap_config)
++ return -ENOMEM;
++
++ sw_regmap_config->name = "switch";
++ sw_regmap_config->reg_bits = 16;
++ sw_regmap_config->val_bits = 32;
++ sw_regmap_config->reg_stride = 4;
++ sw_regmap_config->max_register = MT7530_CREV;
++ priv->regmap = devm_regmap_init_mmio(&pdev->dev, base_addr, sw_regmap_config);
++ if (IS_ERR(priv->regmap))
++ return PTR_ERR(priv->regmap);
++
++ return dsa_register_switch(priv->ds);
++}
++
++static int
++mt7988_remove(struct platform_device *pdev)
++{
++ struct mt7530_priv *priv = platform_get_drvdata(pdev);
++
++ if (priv)
++ mt7530_remove_common(priv);
++
++ return 0;
++}
++
++static void mt7988_shutdown(struct platform_device *pdev)
++{
++ struct mt7530_priv *priv = platform_get_drvdata(pdev);
++
++ if (!priv)
++ return;
++
++ dsa_switch_shutdown(priv->ds);
++
++ dev_set_drvdata(&pdev->dev, NULL);
++}
++
++static struct platform_driver mt7988_platform_driver = {
++ .probe = mt7988_probe,
++ .remove = mt7988_remove,
++ .shutdown = mt7988_shutdown,
++ .driver = {
++ .name = "mt7530-mmio",
++ .of_match_table = mt7988_of_match,
++ },
++};
++module_platform_driver(mt7988_platform_driver);
++
++MODULE_AUTHOR("Daniel Golle <daniel at makrotopia.org>");
++MODULE_DESCRIPTION("Driver for Mediatek MT7530 Switch (MMIO)");
++MODULE_LICENSE("GPL");
+--- a/drivers/net/dsa/mt7530.c
++++ b/drivers/net/dsa/mt7530.c
+@@ -1984,6 +1984,47 @@ static const struct irq_domain_ops mt753
+ };
+
+ static void
++mt7988_irq_mask(struct irq_data *d)
++{
++ struct mt7530_priv *priv = irq_data_get_irq_chip_data(d);
++
++ priv->irq_enable &= ~BIT(d->hwirq);
++ mt7530_mii_write(priv, MT7530_SYS_INT_EN, priv->irq_enable);
++}
++
++static void
++mt7988_irq_unmask(struct irq_data *d)
++{
++ struct mt7530_priv *priv = irq_data_get_irq_chip_data(d);
++
++ priv->irq_enable |= BIT(d->hwirq);
++ mt7530_mii_write(priv, MT7530_SYS_INT_EN, priv->irq_enable);
++}
++
++static struct irq_chip mt7988_irq_chip = {
++ .name = KBUILD_MODNAME,
++ .irq_mask = mt7988_irq_mask,
++ .irq_unmask = mt7988_irq_unmask,
++};
++
++static int
++mt7988_irq_map(struct irq_domain *domain, unsigned int irq,
++ irq_hw_number_t hwirq)
++{
++ irq_set_chip_data(irq, domain->host_data);
++ irq_set_chip_and_handler(irq, &mt7988_irq_chip, handle_simple_irq);
++ irq_set_nested_thread(irq, true);
++ irq_set_noprobe(irq);
++
++ return 0;
++}
++
++static const struct irq_domain_ops mt7988_irq_domain_ops = {
++ .map = mt7988_irq_map,
++ .xlate = irq_domain_xlate_onecell,
++};
++
++static void
+ mt7530_setup_mdio_irq(struct mt7530_priv *priv)
+ {
+ struct dsa_switch *ds = priv->ds;
+@@ -2017,8 +2058,15 @@ mt7530_setup_irq(struct mt7530_priv *pri
+ return priv->irq ? : -EINVAL;
+ }
+
+- priv->irq_domain = irq_domain_add_linear(np, MT7530_NUM_PHYS,
+- &mt7530_irq_domain_ops, priv);
++ if (priv->id == ID_MT7988)
++ priv->irq_domain = irq_domain_add_linear(np, MT7530_NUM_PHYS,
++ &mt7988_irq_domain_ops,
++ priv);
++ else
++ priv->irq_domain = irq_domain_add_linear(np, MT7530_NUM_PHYS,
++ &mt7530_irq_domain_ops,
++ priv);
++
+ if (!priv->irq_domain) {
+ dev_err(dev, "failed to create IRQ domain\n");
+ return -ENOMEM;
+@@ -2507,6 +2555,25 @@ static void mt7531_mac_port_get_caps(str
+ }
+ }
+
++static void mt7988_mac_port_get_caps(struct dsa_switch *ds, int port,
++ struct phylink_config *config)
++{
++ phy_interface_zero(config->supported_interfaces);
++
++ switch (port) {
++ case 0 ... 4: /* Internal phy */
++ __set_bit(PHY_INTERFACE_MODE_INTERNAL,
++ config->supported_interfaces);
++ break;
++
++ case 6:
++ __set_bit(PHY_INTERFACE_MODE_INTERNAL,
++ config->supported_interfaces);
++ config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
++ MAC_10000FD;
++ }
++}
++
+ static int
+ mt753x_pad_setup(struct dsa_switch *ds, const struct phylink_link_state *state)
+ {
+@@ -2583,6 +2650,17 @@ static bool mt753x_is_mac_port(u32 port)
+ }
+
+ static int
++mt7988_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
++ phy_interface_t interface)
++{
++ if (dsa_is_cpu_port(ds, port) &&
++ interface == PHY_INTERFACE_MODE_INTERNAL)
++ return 0;
++
++ return -EINVAL;
++}
++
++static int
+ mt7531_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
+ phy_interface_t interface)
+ {
+@@ -2652,7 +2730,8 @@ mt753x_phylink_mac_config(struct dsa_swi
+
+ switch (port) {
+ case 0 ... 4: /* Internal phy */
+- if (state->interface != PHY_INTERFACE_MODE_GMII)
++ if (state->interface != PHY_INTERFACE_MODE_GMII &&
++ state->interface != PHY_INTERFACE_MODE_INTERNAL)
+ goto unsupported;
+ break;
+ case 5: /* 2nd cpu port with phy of port 0 or 4 / external phy */
+@@ -2730,7 +2809,8 @@ static void mt753x_phylink_mac_link_up(s
+ /* MT753x MAC works in 1G full duplex mode for all up-clocked
+ * variants.
+ */
+- if (interface == PHY_INTERFACE_MODE_TRGMII ||
++ if (interface == PHY_INTERFACE_MODE_INTERNAL ||
++ interface == PHY_INTERFACE_MODE_TRGMII ||
+ (phy_interface_mode_is_8023z(interface))) {
+ speed = SPEED_1000;
+ duplex = DUPLEX_FULL;
+@@ -2810,6 +2890,21 @@ mt7531_cpu_port_config(struct dsa_switch
+ return 0;
+ }
+
++static int
++mt7988_cpu_port_config(struct dsa_switch *ds, int port)
++{
++ struct mt7530_priv *priv = ds->priv;
++
++ mt7530_write(priv, MT7530_PMCR_P(port),
++ PMCR_CPU_PORT_SETTING(priv->id));
++
++ mt753x_phylink_mac_link_up(ds, port, MLO_AN_FIXED,
++ PHY_INTERFACE_MODE_INTERNAL, NULL,
++ SPEED_10000, DUPLEX_FULL, true, true);
++
++ return 0;
++}
++
+ static void mt753x_phylink_get_caps(struct dsa_switch *ds, int port,
+ struct phylink_config *config)
+ {
+@@ -2955,6 +3050,27 @@ static int mt753x_set_mac_eee(struct dsa
+ return 0;
+ }
+
++static int mt7988_pad_setup(struct dsa_switch *ds, phy_interface_t interface)
++{
++ return 0;
++}
++
++static int mt7988_setup(struct dsa_switch *ds)
++{
++ struct mt7530_priv *priv = ds->priv;
++
++ /* Reset the switch */
++ reset_control_assert(priv->rstc);
++ usleep_range(20, 50);
++ reset_control_deassert(priv->rstc);
++ usleep_range(20, 50);
++
++ /* Reset the switch PHYs */
++ mt7530_write(priv, MT7530_SYS_CTRL, SYS_CTRL_PHY_RST);
++
++ return mt7531_setup_common(ds);
++}
++
+ const struct dsa_switch_ops mt7530_switch_ops = {
+ .get_tag_protocol = mtk_get_tag_protocol,
+ .setup = mt753x_setup,
+@@ -3023,6 +3139,17 @@ const struct mt753x_info mt753x_table[]
+ .mac_port_get_caps = mt7531_mac_port_get_caps,
+ .mac_port_config = mt7531_mac_config,
+ },
++ [ID_MT7988] = {
++ .id = ID_MT7988,
++ .pcs_ops = &mt7530_pcs_ops,
++ .sw_setup = mt7988_setup,
++ .phy_read = mt7531_ind_phy_read,
++ .phy_write = mt7531_ind_phy_write,
++ .pad_setup = mt7988_pad_setup,
++ .cpu_port_config = mt7988_cpu_port_config,
++ .mac_port_get_caps = mt7988_mac_port_get_caps,
++ .mac_port_config = mt7988_mac_config,
++ },
+ };
+ EXPORT_SYMBOL_GPL(mt753x_table);
+
+--- a/drivers/net/dsa/mt7530.h
++++ b/drivers/net/dsa/mt7530.h
+@@ -18,6 +18,7 @@ enum mt753x_id {
+ ID_MT7530 = 0,
+ ID_MT7621 = 1,
+ ID_MT7531 = 2,
++ ID_MT7988 = 3,
+ };
+
+ #define NUM_TRGMII_CTRL 5
+@@ -54,11 +55,11 @@ enum mt753x_id {
+ #define MT7531_MIRROR_PORT_SET(x) (((x) & MIRROR_MASK) << 16)
+ #define MT7531_CPU_PMAP_MASK GENMASK(7, 0)
+
+-#define MT753X_MIRROR_REG(id) (((id) == ID_MT7531) ? \
++#define MT753X_MIRROR_REG(id) ((((id) == ID_MT7531) || ((id) == ID_MT7988)) ? \
+ MT7531_CFC : MT7530_MFC)
+-#define MT753X_MIRROR_EN(id) (((id) == ID_MT7531) ? \
++#define MT753X_MIRROR_EN(id) ((((id) == ID_MT7531) || ((id) == ID_MT7988)) ? \
+ MT7531_MIRROR_EN : MIRROR_EN)
+-#define MT753X_MIRROR_MASK(id) (((id) == ID_MT7531) ? \
++#define MT753X_MIRROR_MASK(id) ((((id) == ID_MT7531) || ((id) == ID_MT7988)) ? \
+ MT7531_MIRROR_MASK : MIRROR_MASK)
+
+ /* Registers for BPDU and PAE frame control*/
+@@ -295,9 +296,8 @@ enum mt7530_vlan_port_acc_frm {
+ MT7531_FORCE_DPX | \
+ MT7531_FORCE_RX_FC | \
+ MT7531_FORCE_TX_FC)
+-#define PMCR_FORCE_MODE_ID(id) (((id) == ID_MT7531) ? \
+- MT7531_FORCE_MODE : \
+- PMCR_FORCE_MODE)
++#define PMCR_FORCE_MODE_ID(id) ((((id) == ID_MT7531) || ((id) == ID_MT7988)) ? \
++ MT7531_FORCE_MODE : PMCR_FORCE_MODE)
+ #define PMCR_LINK_SETTINGS_MASK (PMCR_TX_EN | PMCR_FORCE_SPEED_1000 | \
+ PMCR_RX_EN | PMCR_FORCE_SPEED_100 | \
+ PMCR_TX_FC_EN | PMCR_RX_FC_EN | \
diff --git a/target/linux/generic/backport-5.15/790-v6.4-0014-net-dsa-mt7530-fix-support-for-MT7531BE.patch b/target/linux/generic/backport-5.15/790-v6.4-0014-net-dsa-mt7530-fix-support-for-MT7531BE.patch
new file mode 100644
index 0000000000..5259730996
--- /dev/null
+++ b/target/linux/generic/backport-5.15/790-v6.4-0014-net-dsa-mt7530-fix-support-for-MT7531BE.patch
@@ -0,0 +1,118 @@
+From 91daa4f62ce878b6e1ac5908aceb83550332447f Mon Sep 17 00:00:00 2001
+From: Daniel Golle <daniel at makrotopia.org>
+Date: Sun, 16 Apr 2023 13:08:14 +0100
+Subject: [PATCH] net: dsa: mt7530: fix support for MT7531BE
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+There are two variants of the MT7531 switch IC which got different
+features (and pins) regarding port 5:
+ * MT7531AE: SGMII/1000Base-X/2500Base-X SerDes PCS
+ * MT7531BE: RGMII
+
+Moving the creation of the SerDes PCS from mt753x_setup to mt7530_probe
+with commit 6de285229773 ("net: dsa: mt7530: move SGMII PCS creation
+to mt7530_probe function") works fine for MT7531AE which got two
+instances of mtk-pcs-lynxi, however, MT7531BE requires mt7531_pll_setup
+to setup clocks before the single PCS on port 6 (usually used as CPU
+port) starts to work and hence the PCS creation failed on MT7531BE.
+
+Fix this by introducing a pointer to mt7531_create_sgmii function in
+struct mt7530_priv and call it again at the end of mt753x_setup like it
+was before commit 6de285229773 ("net: dsa: mt7530: move SGMII PCS
+creation to mt7530_probe function").
+
+Fixes: 6de285229773 ("net: dsa: mt7530: move SGMII PCS creation to mt7530_probe function")
+Signed-off-by: Daniel Golle <daniel at makrotopia.org>
+Acked-by: Arınç ÜNAL <arinc.unal at arinc9.com>
+Link: https://lore.kernel.org/r/ZDvlLhhqheobUvOK@makrotopia.org
+Signed-off-by: Jakub Kicinski <kuba at kernel.org>
+---
+ drivers/net/dsa/mt7530-mdio.c | 16 ++++++++--------
+ drivers/net/dsa/mt7530.c | 6 ++++++
+ drivers/net/dsa/mt7530.h | 4 ++--
+ 3 files changed, 16 insertions(+), 10 deletions(-)
+
+--- a/drivers/net/dsa/mt7530-mdio.c
++++ b/drivers/net/dsa/mt7530-mdio.c
+@@ -81,14 +81,17 @@ static const struct regmap_bus mt7530_re
+ };
+
+ static int
+-mt7531_create_sgmii(struct mt7530_priv *priv)
++mt7531_create_sgmii(struct mt7530_priv *priv, bool dual_sgmii)
+ {
+- struct regmap_config *mt7531_pcs_config[2];
++ struct regmap_config *mt7531_pcs_config[2] = {};
+ struct phylink_pcs *pcs;
+ struct regmap *regmap;
+ int i, ret = 0;
+
+- for (i = 0; i < 2; i++) {
++ /* MT7531AE has two SGMII units for port 5 and port 6
++ * MT7531BE has only one SGMII unit for port 6
++ */
++ for (i = dual_sgmii ? 0 : 1; i < 2; i++) {
+ mt7531_pcs_config[i] = devm_kzalloc(priv->dev,
+ sizeof(struct regmap_config),
+ GFP_KERNEL);
+@@ -208,11 +211,8 @@ mt7530_probe(struct mdio_device *mdiodev
+ if (IS_ERR(priv->regmap))
+ return PTR_ERR(priv->regmap);
+
+- if (priv->id == ID_MT7531) {
+- ret = mt7531_create_sgmii(priv);
+- if (ret)
+- return ret;
+- }
++ if (priv->id == ID_MT7531)
++ priv->create_sgmii = mt7531_create_sgmii;
+
+ return dsa_register_switch(priv->ds);
+ }
+--- a/drivers/net/dsa/mt7530.c
++++ b/drivers/net/dsa/mt7530.c
+@@ -3017,6 +3017,12 @@ mt753x_setup(struct dsa_switch *ds)
+ if (ret && priv->irq)
+ mt7530_free_irq_common(priv);
+
++ if (priv->create_sgmii) {
++ ret = priv->create_sgmii(priv, mt7531_dual_sgmii_supported(priv));
++ if (ret && priv->irq)
++ mt7530_free_irq(priv);
++ }
++
+ return ret;
+ }
+
+--- a/drivers/net/dsa/mt7530.h
++++ b/drivers/net/dsa/mt7530.h
+@@ -741,10 +741,10 @@ struct mt753x_info {
+ * registers
+ * @p6_interface Holding the current port 6 interface
+ * @p5_intf_sel: Holding the current port 5 interface select
+- *
+ * @irq: IRQ number of the switch
+ * @irq_domain: IRQ domain of the switch irq_chip
+ * @irq_enable: IRQ enable bits, synced to SYS_INT_EN
++ * @create_sgmii: Pointer to function creating SGMII PCS instance(s)
+ */
+ struct mt7530_priv {
+ struct device *dev;
+@@ -763,7 +763,6 @@ struct mt7530_priv {
+ unsigned int p5_intf_sel;
+ u8 mirror_rx;
+ u8 mirror_tx;
+-
+ struct mt7530_port ports[MT7530_NUM_PORTS];
+ struct mt753x_pcs pcs[MT7530_NUM_PORTS];
+ /* protect among processes for registers access*/
+@@ -771,6 +770,7 @@ struct mt7530_priv {
+ int irq;
+ struct irq_domain *irq_domain;
+ u32 irq_enable;
++ int (*create_sgmii)(struct mt7530_priv *priv, bool dual_sgmii);
+ };
+
+ struct mt7530_hw_vlan_entry {
diff --git a/target/linux/generic/backport-5.15/791-v6.2-01-net-phy-Add-driver-for-Motorcomm-yt8521-gigabit-ethernet.patch b/target/linux/generic/backport-5.15/791-v6.2-01-net-phy-Add-driver-for-Motorcomm-yt8521-gigabit-ethernet.patch
index 57137c34fc..e2a0e25a79 100644
--- a/target/linux/generic/backport-5.15/791-v6.2-01-net-phy-Add-driver-for-Motorcomm-yt8521-gigabit-ethernet.patch
+++ b/target/linux/generic/backport-5.15/791-v6.2-01-net-phy-Add-driver-for-Motorcomm-yt8521-gigabit-ethernet.patch
@@ -21,7 +21,7 @@ Signed-off-by: David S. Miller <davem at davemloft.net>
--- a/MAINTAINERS
+++ b/MAINTAINERS
-@@ -12697,6 +12697,7 @@ F: include/uapi/linux/meye.h
+@@ -12700,6 +12700,7 @@ F: include/uapi/linux/meye.h
MOTORCOMM PHY DRIVER
M: Peter Geis <pgwipeout at gmail.com>
diff --git a/target/linux/generic/backport-5.15/804-v5.18-0009-nvmem-Add-driver-for-OCOTP-in-Sunplus-SP7021.patch b/target/linux/generic/backport-5.15/804-v5.18-0009-nvmem-Add-driver-for-OCOTP-in-Sunplus-SP7021.patch
index 2a9dc74947..ae177e0cb0 100644
--- a/target/linux/generic/backport-5.15/804-v5.18-0009-nvmem-Add-driver-for-OCOTP-in-Sunplus-SP7021.patch
+++ b/target/linux/generic/backport-5.15/804-v5.18-0009-nvmem-Add-driver-for-OCOTP-in-Sunplus-SP7021.patch
@@ -19,7 +19,7 @@ Signed-off-by: Greg Kroah-Hartman <gregkh at linuxfoundation.org>
--- a/MAINTAINERS
+++ b/MAINTAINERS
-@@ -17962,6 +17962,11 @@ L: netdev at vger.kernel.org
+@@ -17965,6 +17965,11 @@ L: netdev at vger.kernel.org
S: Maintained
F: drivers/net/ethernet/dlink/sundance.c
diff --git a/target/linux/generic/backport-5.15/806-v6.0-0001-nvmem-microchip-otpc-add-support.patch b/target/linux/generic/backport-5.15/806-v6.0-0001-nvmem-microchip-otpc-add-support.patch
index b1855d1f2f..ad0460d4f3 100644
--- a/target/linux/generic/backport-5.15/806-v6.0-0001-nvmem-microchip-otpc-add-support.patch
+++ b/target/linux/generic/backport-5.15/806-v6.0-0001-nvmem-microchip-otpc-add-support.patch
@@ -57,7 +57,7 @@ Signed-off-by: Greg Kroah-Hartman <gregkh at linuxfoundation.org>
--- a/MAINTAINERS
+++ b/MAINTAINERS
-@@ -12361,6 +12361,14 @@ S: Supported
+@@ -12364,6 +12364,14 @@ S: Supported
F: Documentation/devicetree/bindings/mtd/atmel-nand.txt
F: drivers/mtd/nand/raw/atmel/*
diff --git a/target/linux/generic/pending-5.15/723-net-mt7531-ensure-all-MACs-are-powered-down-before-r.patch b/target/linux/generic/pending-5.15/723-net-mt7531-ensure-all-MACs-are-powered-down-before-r.patch
index d93ee0685b..bd806a7a6d 100644
--- a/target/linux/generic/pending-5.15/723-net-mt7531-ensure-all-MACs-are-powered-down-before-r.patch
+++ b/target/linux/generic/pending-5.15/723-net-mt7531-ensure-all-MACs-are-powered-down-before-r.patch
@@ -15,7 +15,7 @@ Signed-off-by: Alexander Couzens <lynxis at fe80.eu>
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
-@@ -2347,6 +2347,10 @@ mt7531_setup(struct dsa_switch *ds)
+@@ -2440,6 +2440,10 @@ mt7531_setup(struct dsa_switch *ds)
return -ENODEV;
}
diff --git a/target/linux/generic/pending-5.15/795-mt7530-register-OF-node-for-internal-MDIO-bus.patch b/target/linux/generic/pending-5.15/795-mt7530-register-OF-node-for-internal-MDIO-bus.patch
index f9b88db995..8a64a2a985 100644
--- a/target/linux/generic/pending-5.15/795-mt7530-register-OF-node-for-internal-MDIO-bus.patch
+++ b/target/linux/generic/pending-5.15/795-mt7530-register-OF-node-for-internal-MDIO-bus.patch
@@ -16,7 +16,7 @@ Signed-off-by: David Bauer <mail at david-bauer.net>
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
-@@ -2081,10 +2081,13 @@ mt7530_setup_mdio(struct mt7530_priv *pr
+@@ -2121,10 +2121,13 @@ mt7530_setup_mdio(struct mt7530_priv *pr
{
struct dsa_switch *ds = priv->ds;
struct device *dev = priv->dev;
@@ -30,7 +30,7 @@ Signed-off-by: David Bauer <mail at david-bauer.net>
bus = devm_mdiobus_alloc(dev);
if (!bus)
return -ENOMEM;
-@@ -2101,7 +2104,9 @@ mt7530_setup_mdio(struct mt7530_priv *pr
+@@ -2141,7 +2144,9 @@ mt7530_setup_mdio(struct mt7530_priv *pr
if (priv->irq)
mt7530_setup_mdio_irq(priv);
diff --git a/target/linux/mediatek/filogic/config-5.15 b/target/linux/mediatek/filogic/config-5.15
index 7268b69389..134afb63f9 100644
--- a/target/linux/mediatek/filogic/config-5.15
+++ b/target/linux/mediatek/filogic/config-5.15
@@ -250,6 +250,8 @@ CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_NET_DEVLINK=y
CONFIG_NET_DSA=y
CONFIG_NET_DSA_MT7530=y
+CONFIG_NET_DSA_MT7530_MDIO=y
+CONFIG_NET_DSA_MT7530_MMIO=y
CONFIG_NET_DSA_TAG_MTK=y
CONFIG_NET_FLOW_LIMIT=y
CONFIG_NET_MEDIATEK_SOC=y
diff --git a/target/linux/mediatek/mt7622/config-5.15 b/target/linux/mediatek/mt7622/config-5.15
index 88ca94472c..2de14752b4 100644
--- a/target/linux/mediatek/mt7622/config-5.15
+++ b/target/linux/mediatek/mt7622/config-5.15
@@ -272,6 +272,8 @@ CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_NET_DEVLINK=y
CONFIG_NET_DSA=y
CONFIG_NET_DSA_MT7530=y
+CONFIG_NET_DSA_MT7530_MDIO=y
+# CONFIG_NET_DSA_MT7530_MMIO is not set
CONFIG_NET_DSA_TAG_MTK=y
CONFIG_NET_FLOW_LIMIT=y
CONFIG_NET_MEDIATEK_SOC=y
diff --git a/target/linux/mediatek/mt7623/config-5.15 b/target/linux/mediatek/mt7623/config-5.15
index 77d20a3bdb..af0a5c1939 100644
--- a/target/linux/mediatek/mt7623/config-5.15
+++ b/target/linux/mediatek/mt7623/config-5.15
@@ -372,6 +372,8 @@ CONFIG_NEON=y
CONFIG_NET_DEVLINK=y
CONFIG_NET_DSA=y
CONFIG_NET_DSA_MT7530=y
+CONFIG_NET_DSA_MT7530_MDIO=y
+# CONFIG_NET_DSA_MT7530_MMIO is not set
CONFIG_NET_DSA_TAG_MTK=y
CONFIG_NET_FLOW_LIMIT=y
CONFIG_NET_MEDIATEK_SOC=y
diff --git a/target/linux/mediatek/mt7629/config-5.15 b/target/linux/mediatek/mt7629/config-5.15
index 46b444108b..08089dde2a 100644
--- a/target/linux/mediatek/mt7629/config-5.15
+++ b/target/linux/mediatek/mt7629/config-5.15
@@ -197,6 +197,8 @@ CONFIG_NETFILTER=y
CONFIG_NET_DEVLINK=y
CONFIG_NET_DSA=y
CONFIG_NET_DSA_MT7530=y
+CONFIG_NET_DSA_MT7530_MDIO=y
+# CONFIG_NET_DSA_MT7530_MMIO is not set
CONFIG_NET_DSA_TAG_MTK=y
CONFIG_NET_FLOW_LIMIT=y
CONFIG_NET_MEDIATEK_SOC=y
diff --git a/target/linux/ramips/mt7621/config-5.15 b/target/linux/ramips/mt7621/config-5.15
index 1b8a48100d..1b4330c2d1 100644
--- a/target/linux/ramips/mt7621/config-5.15
+++ b/target/linux/ramips/mt7621/config-5.15
@@ -184,6 +184,8 @@ CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NET_DEVLINK=y
CONFIG_NET_DSA=y
CONFIG_NET_DSA_MT7530=y
+CONFIG_NET_DSA_MT7530_MDIO=y
+# CONFIG_NET_DSA_MT7530_MMIO is not set
CONFIG_NET_DSA_TAG_MTK=y
CONFIG_NET_FLOW_LIMIT=y
CONFIG_NET_MEDIATEK_SOC=y
diff --git a/target/linux/realtek/patches-5.15/008-5.17-watchdog-add-realtek-otto-watchdog-timer.patch b/target/linux/realtek/patches-5.15/008-5.17-watchdog-add-realtek-otto-watchdog-timer.patch
index e562dd8396..17ff729f52 100644
--- a/target/linux/realtek/patches-5.15/008-5.17-watchdog-add-realtek-otto-watchdog-timer.patch
+++ b/target/linux/realtek/patches-5.15/008-5.17-watchdog-add-realtek-otto-watchdog-timer.patch
@@ -32,7 +32,7 @@ Signed-off-by: Guenter Roeck <linux at roeck-us.net>
--- a/MAINTAINERS
+++ b/MAINTAINERS
-@@ -15899,6 +15899,13 @@ S: Maintained
+@@ -15902,6 +15902,13 @@ S: Maintained
F: include/sound/rt*.h
F: sound/soc/codecs/rt*
diff --git a/target/linux/realtek/patches-5.15/700-net-dsa-add-support-for-rtl838x-switch.patch b/target/linux/realtek/patches-5.15/700-net-dsa-add-support-for-rtl838x-switch.patch
index 8f40001263..8c6a4c3639 100644
--- a/target/linux/realtek/patches-5.15/700-net-dsa-add-support-for-rtl838x-switch.patch
+++ b/target/linux/realtek/patches-5.15/700-net-dsa-add-support-for-rtl838x-switch.patch
@@ -22,7 +22,7 @@ Submitted-by: John Crispin <john at phrozen.org>
--- a/drivers/net/dsa/Kconfig
+++ b/drivers/net/dsa/Kconfig
-@@ -61,6 +61,8 @@ source "drivers/net/dsa/sja1105/Kconfig"
+@@ -85,6 +85,8 @@ source "drivers/net/dsa/sja1105/Kconfig"
source "drivers/net/dsa/xrs700x/Kconfig"
@@ -33,7 +33,7 @@ Submitted-by: John Crispin <john at phrozen.org>
select NET_DSA_TAG_RTL4_A
--- a/drivers/net/dsa/Makefile
+++ b/drivers/net/dsa/Makefile
-@@ -22,5 +22,6 @@ obj-y += microchip/
+@@ -24,5 +24,6 @@ obj-y += microchip/
obj-y += mv88e6xxx/
obj-y += ocelot/
obj-y += qca/
More information about the lede-commits
mailing list