[openwrt/openwrt] mediatek: add driver for built-in 2.5G Ethernet PHY
LEDE Commits
lede-commits at lists.infradead.org
Thu May 25 01:40:27 PDT 2023
dangole pushed a commit to openwrt/openwrt.git, branch openwrt-23.05:
https://git.openwrt.org/84e3d273553ed9ea7213b50ab267aa4d05dd0a09
commit 84e3d273553ed9ea7213b50ab267aa4d05dd0a09
Author: Daniel Golle <daniel at makrotopia.org>
AuthorDate: Sun Apr 30 17:41:22 2023 +0100
mediatek: add driver for built-in 2.5G Ethernet PHY
Add driver for the built-in 2.5G Ethernet PHY found in the MT7988 SoC.
To function the PHY also needs firmware files which have not yet been
published via linux-firmware.
Signed-off-by: Daniel Golle <daniel at makrotopia.org>
(cherry picked from commit ef2a831dabacfda6c36c79b8f963b5fdd9b2d080)
---
.../files-5.15/drivers/net/phy/mediatek-2p5ge.c | 262 +++++++++++++++++++++
target/linux/mediatek/filogic/config-5.15 | 1 +
target/linux/mediatek/mt7622/config-5.15 | 1 +
...-net-phy-add-driver-for-MediaTek-2.5G-PHY.patch | 39 +++
4 files changed, 303 insertions(+)
diff --git a/target/linux/mediatek/files-5.15/drivers/net/phy/mediatek-2p5ge.c b/target/linux/mediatek/files-5.15/drivers/net/phy/mediatek-2p5ge.c
new file mode 100644
index 0000000000..c12e6b8eb6
--- /dev/null
+++ b/target/linux/mediatek/files-5.15/drivers/net/phy/mediatek-2p5ge.c
@@ -0,0 +1,262 @@
+// SPDX-License-Identifier: GPL-2.0+
+#include <linux/bitfield.h>
+#include <linux/firmware.h>
+#include <linux/module.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/phy.h>
+
+#define MEDAITEK_2P5GE_PHY_DMB_FW "mediatek/mediatek-2p5ge-phy-dmb.bin"
+#define MEDIATEK_2P5GE_PHY_PMB_FW "mediatek/mediatek-2p5ge-phy-pmb.bin"
+
+#define MD32_EN_CFG 0x18
+#define MD32_EN BIT(0)
+
+#define BASE100T_STATUS_EXTEND 0x10
+#define BASE1000T_STATUS_EXTEND 0x11
+#define EXTEND_CTRL_AND_STATUS 0x16
+
+#define PHY_AUX_CTRL_STATUS 0x1d
+#define PHY_AUX_DPX_MASK GENMASK(5, 5)
+#define PHY_AUX_SPEED_MASK GENMASK(4, 2)
+
+/* Registers on MDIO_MMD_VEND1 */
+#define MTK_PHY_LINK_STATUS_MISC 0xa2
+#define MTK_PHY_FDX_ENABLE BIT(5)
+
+/* Registers on MDIO_MMD_VEND2 */
+#define MTK_PHY_LED0_ON_CTRL 0x24
+#define MTK_PHY_LED0_ON_LINK1000 BIT(0)
+#define MTK_PHY_LED0_ON_LINK100 BIT(1)
+#define MTK_PHY_LED0_ON_LINK10 BIT(2)
+#define MTK_PHY_LED0_ON_LINK2500 BIT(7)
+#define MTK_PHY_LED0_POLARITY BIT(14)
+
+#define MTK_PHY_LED1_ON_CTRL 0x26
+#define MTK_PHY_LED1_ON_FDX BIT(4)
+#define MTK_PHY_LED1_ON_HDX BIT(5)
+#define MTK_PHY_LED1_POLARITY BIT(14)
+
+enum {
+ PHY_AUX_SPD_10 = 0,
+ PHY_AUX_SPD_100,
+ PHY_AUX_SPD_1000,
+ PHY_AUX_SPD_2500,
+};
+
+static int mt798x_2p5ge_phy_config_init(struct phy_device *phydev)
+{
+ int ret;
+ int i;
+ const struct firmware *fw;
+ struct device *dev = &phydev->mdio.dev;
+ struct device_node *np;
+ void __iomem *dmb_addr;
+ void __iomem *pmb_addr;
+ void __iomem *mcucsr_base;
+ u16 reg;
+ struct pinctrl *pinctrl;
+
+ np = of_find_compatible_node(NULL, NULL, "mediatek,2p5gphy-fw");
+ if (!np)
+ return -ENOENT;
+
+ dmb_addr = of_iomap(np, 0);
+ if (!dmb_addr)
+ return -ENOMEM;
+ pmb_addr = of_iomap(np, 1);
+ if (!pmb_addr)
+ return -ENOMEM;
+ mcucsr_base = of_iomap(np, 2);
+ if (!mcucsr_base)
+ return -ENOMEM;
+
+ ret = request_firmware(&fw, MEDAITEK_2P5GE_PHY_DMB_FW, dev);
+ if (ret) {
+ dev_err(dev, "failed to load firmware: %s, ret: %d\n",
+ MEDAITEK_2P5GE_PHY_DMB_FW, ret);
+ return ret;
+ }
+ for (i = 0; i < fw->size - 1; i += 4)
+ writel(*((uint32_t *)(fw->data + i)), dmb_addr + i);
+ release_firmware(fw);
+
+ ret = request_firmware(&fw, MEDIATEK_2P5GE_PHY_PMB_FW, dev);
+ if (ret) {
+ dev_err(dev, "failed to load firmware: %s, ret: %d\n",
+ MEDIATEK_2P5GE_PHY_PMB_FW, ret);
+ return ret;
+ }
+ for (i = 0; i < fw->size - 1; i += 4)
+ writel(*((uint32_t *)(fw->data + i)), pmb_addr + i);
+ release_firmware(fw);
+
+ reg = readw(mcucsr_base + MD32_EN_CFG);
+ writew(reg | MD32_EN, mcucsr_base + MD32_EN_CFG);
+ dev_dbg(dev, "Firmware loading/trigger ok.\n");
+
+ /* Setup LED */
+ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND2, MTK_PHY_LED0_ON_CTRL,
+ MTK_PHY_LED0_POLARITY);
+
+ phy_set_bits_mmd(phydev, MDIO_MMD_VEND2, MTK_PHY_LED0_ON_CTRL,
+ MTK_PHY_LED0_ON_LINK10 |
+ MTK_PHY_LED0_ON_LINK100 |
+ MTK_PHY_LED0_ON_LINK1000 |
+ MTK_PHY_LED0_ON_LINK2500);
+
+ phy_set_bits_mmd(phydev, MDIO_MMD_VEND2, MTK_PHY_LED1_ON_CTRL,
+ MTK_PHY_LED1_ON_FDX | MTK_PHY_LED1_ON_HDX);
+
+ pinctrl = devm_pinctrl_get_select(&phydev->mdio.dev, "i2p5gbe-led");
+ if (IS_ERR(pinctrl)) {
+ dev_err(&phydev->mdio.dev, "Fail to set LED pins!\n");
+ return PTR_ERR(pinctrl);
+ }
+
+ return 0;
+}
+
+static int mt798x_2p5ge_phy_config_aneg(struct phy_device *phydev)
+{
+ bool changed = false;
+ u32 adv;
+ int ret;
+
+ if (phydev->autoneg == AUTONEG_DISABLE) {
+ /* Configure half duplex with genphy_setup_forced,
+ * because genphy_c45_pma_setup_forced does not support.
+ */
+ return phydev->duplex != DUPLEX_FULL
+ ? genphy_setup_forced(phydev)
+ : genphy_c45_pma_setup_forced(phydev);
+ }
+
+ ret = genphy_c45_an_config_aneg(phydev);
+ if (ret < 0)
+ return ret;
+ if (ret > 0)
+ changed = true;
+
+ adv = linkmode_adv_to_mii_ctrl1000_t(phydev->advertising);
+ ret = phy_modify_changed(phydev, MII_CTRL1000,
+ ADVERTISE_1000FULL | ADVERTISE_1000HALF,
+ adv);
+ if (ret < 0)
+ return ret;
+ if (ret > 0)
+ changed = true;
+
+ return genphy_c45_check_and_restart_aneg(phydev, changed);
+}
+
+static int mt798x_2p5ge_phy_get_features(struct phy_device *phydev)
+{
+ int ret;
+
+ ret = genphy_read_abilities(phydev);
+ if (ret)
+ return ret;
+
+ /* We don't support HDX at MAC layer on mt798x.
+ * So mask phy's HDX capabilities, too.
+ */
+ linkmode_set_bit(ETHTOOL_LINK_MODE_10baseT_Full_BIT,
+ phydev->supported);
+ linkmode_set_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT,
+ phydev->supported);
+ linkmode_set_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
+ phydev->supported);
+ linkmode_set_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
+ phydev->supported);
+ linkmode_set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, phydev->supported);
+
+ return 0;
+}
+
+static int mt798x_2p5ge_phy_read_status(struct phy_device *phydev)
+{
+ int ret;
+
+ ret = genphy_update_link(phydev);
+ if (ret)
+ return ret;
+
+ phydev->speed = SPEED_UNKNOWN;
+ phydev->duplex = DUPLEX_UNKNOWN;
+ phydev->pause = 0;
+ phydev->asym_pause = 0;
+
+ if (!phydev->link)
+ return 0;
+
+ if (phydev->autoneg == AUTONEG_ENABLE && phydev->autoneg_complete) {
+ ret = genphy_c45_read_lpa(phydev);
+ if (ret < 0)
+ return ret;
+
+ /* Read the link partner's 1G advertisement */
+ ret = phy_read(phydev, MII_STAT1000);
+ if (ret < 0)
+ return ret;
+ mii_stat1000_mod_linkmode_lpa_t(phydev->lp_advertising, ret);
+ } else if (phydev->autoneg == AUTONEG_DISABLE) {
+ linkmode_zero(phydev->lp_advertising);
+ }
+
+ ret = phy_read(phydev, PHY_AUX_CTRL_STATUS);
+ if (ret < 0)
+ return ret;
+
+ switch (FIELD_GET(PHY_AUX_SPEED_MASK, ret)) {
+ case PHY_AUX_SPD_10:
+ phydev->speed = SPEED_10;
+ break;
+ case PHY_AUX_SPD_100:
+ phydev->speed = SPEED_100;
+ break;
+ case PHY_AUX_SPD_1000:
+ phydev->speed = SPEED_1000;
+ break;
+ case PHY_AUX_SPD_2500:
+ phydev->speed = SPEED_2500;
+ phydev->duplex = DUPLEX_FULL; /* 2.5G must be FDX */
+ break;
+ }
+
+ ret = phy_read_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_LINK_STATUS_MISC);
+ if (ret < 0)
+ return ret;
+
+ phydev->duplex = (ret & MTK_PHY_FDX_ENABLE) ? DUPLEX_FULL : DUPLEX_HALF;
+
+ return 0;
+}
+
+static struct phy_driver mtk_gephy_driver[] = {
+ {
+ PHY_ID_MATCH_EXACT(0x00339c11),
+ .name = "MediaTek MT798x 2.5GbE PHY",
+ .config_init = mt798x_2p5ge_phy_config_init,
+ .config_aneg = mt798x_2p5ge_phy_config_aneg,
+ .get_features = mt798x_2p5ge_phy_get_features,
+ .read_status = mt798x_2p5ge_phy_read_status,
+ },
+};
+
+module_phy_driver(mtk_gephy_driver);
+
+static struct mdio_device_id __maybe_unused mtk_2p5ge_phy_tbl[] = {
+ { PHY_ID_MATCH_VENDOR(0x00339c00) },
+ { }
+};
+
+MODULE_DESCRIPTION("MediaTek 2.5Gb Ethernet PHY driver");
+MODULE_AUTHOR("SkyLake Huang <SkyLake.Huang at mediatek.com>");
+MODULE_LICENSE("GPL");
+
+MODULE_DEVICE_TABLE(mdio, mtk_2p5ge_phy_tbl);
+MODULE_FIRMWARE(MEDAITEK_2P5GE_PHY_DMB_FW);
+MODULE_FIRMWARE(MEDIATEK_2P5GE_PHY_PMB_FW);
diff --git a/target/linux/mediatek/filogic/config-5.15 b/target/linux/mediatek/filogic/config-5.15
index e6ab85fb5d..224d10d0e1 100644
--- a/target/linux/mediatek/filogic/config-5.15
+++ b/target/linux/mediatek/filogic/config-5.15
@@ -204,6 +204,7 @@ CONFIG_MAXLINEAR_GPHY=y
CONFIG_MDIO_BUS=y
CONFIG_MDIO_DEVICE=y
CONFIG_MDIO_DEVRES=y
+CONFIG_MEDIATEK_2P5G_PHY=y
CONFIG_MEDIATEK_GE_PHY=y
CONFIG_MEDIATEK_GE_SOC_PHY=y
CONFIG_MEDIATEK_WATCHDOG=y
diff --git a/target/linux/mediatek/mt7622/config-5.15 b/target/linux/mediatek/mt7622/config-5.15
index d584497ec1..79df71c990 100644
--- a/target/linux/mediatek/mt7622/config-5.15
+++ b/target/linux/mediatek/mt7622/config-5.15
@@ -225,6 +225,7 @@ CONFIG_MAGIC_SYSRQ=y
CONFIG_MDIO_BUS=y
CONFIG_MDIO_DEVICE=y
CONFIG_MDIO_DEVRES=y
+# CONFIG_MEDIATEK_2P5G_PHY is not set
CONFIG_MEDIATEK_GE_PHY=y
# CONFIG_MEDIATEK_GE_SOC_PHY is not set
CONFIG_MEDIATEK_WATCHDOG=y
diff --git a/target/linux/mediatek/patches-5.15/732-net-phy-add-driver-for-MediaTek-2.5G-PHY.patch b/target/linux/mediatek/patches-5.15/732-net-phy-add-driver-for-MediaTek-2.5G-PHY.patch
new file mode 100644
index 0000000000..a2a3bab632
--- /dev/null
+++ b/target/linux/mediatek/patches-5.15/732-net-phy-add-driver-for-MediaTek-2.5G-PHY.patch
@@ -0,0 +1,39 @@
+From 128dc09b0af36772062142ce9e85b19c84ac789a Mon Sep 17 00:00:00 2001
+From: Daniel Golle <daniel at makrotopia.org>
+Date: Tue, 28 Feb 2023 17:53:37 +0000
+Subject: [PATCH] net: phy: add driver for MediaTek 2.5G PHY
+
+Signed-off-by: Daniel Golle <daniel at makrotopia.org>
+---
+ drivers/net/phy/Kconfig | 7 ++
+ drivers/net/phy/Makefile | 1 +
+ drivers/net/phy/mediatek-2p5ge.c | 220 +++++++++++++++++++++++++++++++
+ 3 files changed, 226 insertions(+)
+ create mode 100644 drivers/net/phy/mediatek-2p5ge.c
+
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -304,6 +304,13 @@ config MEDIATEK_GE_SOC_PHY
+ present in the SoCs efuse and will dynamically calibrate VCM
+ (common-mode voltage) during startup.
+
++config MEDIATEK_2P5G_PHY
++ tristate "MediaTek 2.5G Ethernet PHY"
++ depends on (ARCH_MEDIATEK && ARM64) || COMPILE_TEST
++ default NET_MEDIATEK_SOC
++ help
++ Supports the MediaTek 2.5G Ethernet PHY.
++
+ config MICREL_PHY
+ tristate "Micrel PHYs"
+ help
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -80,6 +80,7 @@ obj-$(CONFIG_MARVELL_10G_PHY) += marvell
+ obj-$(CONFIG_MARVELL_PHY) += marvell.o
+ obj-$(CONFIG_MARVELL_88X2222_PHY) += marvell-88x2222.o
+ obj-$(CONFIG_MAXLINEAR_GPHY) += mxl-gpy.o
++obj-$(CONFIG_MEDIATEK_2P5G_PHY) += mediatek-2p5ge.o
+ obj-$(CONFIG_MEDIATEK_GE_PHY) += mediatek-ge.o
+ obj-$(CONFIG_MEDIATEK_GE_SOC_PHY) += mediatek-ge-soc.o
+ obj-$(CONFIG_MESON_GXL_PHY) += meson-gxl.o
More information about the lede-commits
mailing list