[openwrt/openwrt] imx: image: ventana: add blkdev compressed disk image

[LEDE Commits]

chunkeey pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/1f5f17798a33ce9d8aca9f2f0c6192046e5c5807

commit 1f5f17798a33ce9d8aca9f2f0c6192046e5c5807
Author: Tim Harvey <tharvey at gateworks.com>
AuthorDate: Fri Feb 17 14:03:46 2023 -0800

    imx: image: ventana: add blkdev compressed disk image
    
    Add a ventana-img.gz compressed disk image to support
    squashfs+ext4 on a block storage device such as USB/MMC/SATA.
    
    The Ventana bootloader expects the bootscript to be
    boot/6x_bootscript-ventana therefore we must create a bootfs
    that matches this.
    
    Signed-off-by: Tim Harvey <tharvey at gateworks.com>
---
 target/linux/imx/image/cortexa9.mk | 26 +++++++++++++++++++++++++-
 1 file changed, 25 insertions(+), 1 deletion(-)

diff --git a/target/linux/imx/image/cortexa9.mk b/target/linux/imx/image/cortexa9.mk
index 78079aa746..2edbbaac47 100644
--- a/target/linux/imx/image/cortexa9.mk
+++ b/target/linux/imx/image/cortexa9.mk
@@ -52,6 +52,29 @@ define Build/apalis-emmc
 	$(Build/imx-combined-image-clean)
 endef
 
+define Build/ventana-img
+	rm -rf $@.boot
+	mkdir -p $@.boot/boot
+	$(CP) $(IMAGE_KERNEL) $@.boot/boot/uImage
+	$(foreach dts,$(DEVICE_DTS), \
+		$(CP) \
+			$(DTS_DIR)/$(dts).dtb \
+			$@.boot/boot/;
+	)
+	mkimage -A arm -O linux -T script -C none -a 0 -e 0 \
+		-n '$(DEVICE_ID) OpenWrt bootscript' \
+		-d bootscript-$(DEVICE_NAME) \
+		$@.boot/boot/6x_bootscript-ventana
+	cp $@ $@.fs
+
+	$(SCRIPT_DIR)/gen_image_generic.sh $@ \
+		$(CONFIG_TARGET_KERNEL_PARTSIZE) \
+		$@.boot \
+		$(CONFIG_TARGET_ROOTFS_PARTSIZE) \
+		$@.fs \
+		1024
+	$(Build/imx-combined-image-clean)
+endef
 
 define Device/Default
   PROFILES := Default
@@ -99,10 +122,11 @@ define Device/gateworks_ventana
 	kmod-sound-soc-imx-sgtl5000 kmod-can kmod-can-flexcan kmod-can-raw \
 	kmod-hwmon-gsc kmod-leds-gpio kmod-pps-gpio kobs-ng
   KERNEL += | boot-overlay
-  IMAGES := nand.ubi bootfs.tar.gz dtb
+  IMAGES := img.gz nand.ubi bootfs.tar.gz dtb
   IMAGE/nand.ubi := append-ubi
   IMAGE/bootfs.tar.gz := bootfs.tar.gz
   IMAGE/dtb := install-dtb
+  IMAGE/img.gz := append-rootfs | pad-extra 128k | ventana-img | gzip
   UBINIZE_PARTS = boot=$$(KDIR_KERNEL_IMAGE).boot.ubifs=15
   PAGESIZE := 2048
   BLOCKSIZE := 128k