[openwrt/openwrt] ramips: add basic common recipe for nand flash devices
LEDE Commits
lede-commits at lists.infradead.org
Thu May 18 07:50:18 PDT 2023
hauke pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/b09a83808a3a4f6ff2ff0cf1f12fdc4193357896
commit b09a83808a3a4f6ff2ff0cf1f12fdc4193357896
Author: Shiji Yang <yangshiji66 at qq.com>
AuthorDate: Sat May 13 21:01:00 2023 +0800
ramips: add basic common recipe for nand flash devices
These same codes are repeated for many devices now, it's better to
move them to shared definition. This commit also add the missing
KERNEL_SIZE of the ZyXEL NR7101 and ZyXEL LTE3301-PLUS.
Signed-off-by: Shiji Yang <yangshiji66 at qq.com>
---
target/linux/ramips/image/mt7621.mk | 254 +++++++-----------------------------
1 file changed, 47 insertions(+), 207 deletions(-)
diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk
index 56b4d173fb..2697f84bf7 100644
--- a/target/linux/ramips/image/mt7621.mk
+++ b/target/linux/ramips/image/mt7621.mk
@@ -148,6 +148,15 @@ define Device/dsa-migration
DEVICE_COMPAT_MESSAGE := Config cannot be migrated from swconfig to DSA
endef
+define Device/nand
+ $(Device/dsa-migration)
+ BLOCKSIZE := 128k
+ KERNEL_SIZE := 4096k
+ PAGESIZE := 2048
+ UBINIZE_OPTS := -E 5
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+endef
+
define Device/adslr_g7
$(Device/dsa-migration)
IMAGE_SIZE := 16064k
@@ -181,17 +190,12 @@ endef
TARGET_DEVICES += alfa-network_quad-e4g
define Device/ampedwireless_ally_common
- $(Device/dsa-migration)
+ $(Device/nand)
DEVICE_VENDOR := Amped Wireless
DEVICE_PACKAGES := kmod-mt7615-firmware
IMAGE_SIZE := 32768k
- KERNEL_SIZE := 4096k
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- UBINIZE_OPTS := -E 5
KERNEL_INITRAMFS := $(KERNEL_DTB) | uImage lzma -n 'flashable-initramfs' |\
edimax-header -s CSYS -m RN68 -f 0x001c0000 -S 0x01100000
- IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
define Device/ampedwireless_ally-r1900k
@@ -295,16 +299,11 @@ endef
TARGET_DEVICES += asus_rt-ac57u-v1
define Device/asus_rt-ac65p
- $(Device/dsa-migration)
+ $(Device/nand)
DEVICE_VENDOR := ASUS
DEVICE_MODEL := RT-AC65P
IMAGE_SIZE := 51200k
- UBINIZE_OPTS := -E 5
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- KERNEL_SIZE := 4096k
IMAGES += factory.bin
- IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | \
check-size
DEVICE_PACKAGES := kmod-usb3 kmod-mt7615-firmware
@@ -312,16 +311,11 @@ endef
TARGET_DEVICES += asus_rt-ac65p
define Device/asus_rt-ac85p
- $(Device/dsa-migration)
+ $(Device/nand)
DEVICE_VENDOR := ASUS
DEVICE_MODEL := RT-AC85P
IMAGE_SIZE := 51200k
- UBINIZE_OPTS := -E 5
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- KERNEL_SIZE := 4096k
IMAGES += factory.bin
- IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | \
check-size
DEVICE_PACKAGES := kmod-usb3 kmod-mt7615-firmware
@@ -341,18 +335,13 @@ endef
TARGET_DEVICES += asus_rt-n56u-b1
define Device/asus_rt-ax53u
- $(Device/dsa-migration)
+ $(Device/nand)
DEVICE_VENDOR := ASUS
DEVICE_MODEL := RT-AX53U
DEVICE_ALT0_VENDOR := ASUS
DEVICE_ALT0_MODEL := RT-AX1800U
IMAGE_SIZE := 51200k
- UBINIZE_OPTS := -E 5
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- KERNEL_SIZE := 4096k
IMAGES += factory.bin
- IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | \
check-size
DEVICE_PACKAGES := kmod-mt7915-firmware kmod-usb3 kmod-usb-ledtrig-usbport
@@ -360,7 +349,7 @@ endef
TARGET_DEVICES += asus_rt-ax53u
define Device/asus_rt-ax54
- $(Device/dsa-migration)
+ $(Device/nand)
DEVICE_VENDOR := ASUS
DEVICE_MODEL := RT-AX54
DEVICE_ALT0_VENDOR := ASUS
@@ -370,12 +359,7 @@ define Device/asus_rt-ax54
DEVICE_ALT2_VENDOR := ASUS
DEVICE_ALT2_MODEL := RT-AX1800S
IMAGE_SIZE := 51200k
- UBINIZE_OPTS := -E 5
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- KERNEL_SIZE := 4096k
IMAGES += factory.bin
- IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | \
check-size
DEVICE_PACKAGES := kmod-mt7915-firmware
@@ -383,22 +367,18 @@ endef
TARGET_DEVICES += asus_rt-ax54
define Device/beeline_smartbox-flash
- $(Device/dsa-migration)
+ $(Device/nand)
$(Device/uimage-lzma-loader)
DEVICE_VENDOR := Beeline
DEVICE_MODEL := SmartBox Flash
IMAGE_SIZE := 32768k
KERNEL_SIZE := 4352k
- UBINIZE_OPTS := -E 5
- BLOCKSIZE := 128k
- PAGESIZE := 2048
KERNEL := kernel-bin | append-dtb | lzma | loader-kernel | \
uImage none | arcadyan-trx 0x746f435d | pad-to $$(KERNEL_SIZE)
KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | loader-kernel | \
uImage none
IMAGES += factory.trx
IMAGE/factory.trx := append-kernel | append-ubi | check-size
- IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
DEVICE_PACKAGES := kmod-usb3 kmod-mt7615-firmware uencrypt-mbedtls
endef
TARGET_DEVICES += beeline_smartbox-flash
@@ -429,21 +409,16 @@ endef
TARGET_DEVICES += beeline_smartbox-turbo
define Device/belkin_rt1800
- $(Device/dsa-migration)
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- KERNEL_SIZE := 4096k
+ $(Device/nand)
IMAGE_SIZE := 49152k
DEVICE_VENDOR := Belkin
DEVICE_MODEL := RT1800
DEVICE_PACKAGES := kmod-mt7915-firmware kmod-usb3
- UBINIZE_OPTS := -E 5
KERNEL_LOADADDR := 0x82000000
KERNEL := kernel-bin | relocate-kernel 0x80001000 | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb | \
append-squashfs4-fakeroot
IMAGES += factory.bin
- IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | \
append-ubi | check-size | belkin-header RT18 1 9.9.9
endef
@@ -580,20 +555,16 @@ endef
TARGET_DEVICES += dlink_dap-1620-b1
define Device/dlink_dap-x1860-a1
- $(Device/dsa-migration)
+ $(Device/nand)
IMAGE_SIZE := 53248k
DEVICE_VENDOR := D-Link
DEVICE_MODEL := DAP-X1860
DEVICE_VARIANT := A1
- UBINIZE_OPTS := -E 5
- BLOCKSIZE := 128k
- PAGESIZE := 2048
KERNEL_SIZE := 8192k
KERNEL_LOADADDR := 0x82000000
KERNEL := kernel-bin | relocate-kernel 0x80001000 | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
IMAGES += factory.bin
- IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | \
check-size | elx-header 011b0060 8844A2D168B45A2D
DEVICE_PACKAGES := kmod-mt7915-firmware rssileds -uboot-envtools
@@ -623,18 +594,13 @@ define Device/dlink_dir-8xx-r1
endef
define Device/dlink_dir-xx60-a1
- $(Device/dsa-migration)
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- KERNEL_SIZE := 4096k
+ $(Device/nand)
IMAGE_SIZE := 40960k
- UBINIZE_OPTS := -E 5
DEVICE_VENDOR := D-Link
DEVICE_PACKAGES := kmod-mt7615-firmware kmod-usb3 \
kmod-usb-ledtrig-usbport -uboot-envtools
KERNEL := $$(KERNEL) | uimage-sgehdr
IMAGES += factory.bin
- IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | \
check-size
endef
@@ -1035,17 +1001,13 @@ endef
TARGET_DEVICES += hanyang_hyc-g920
define Device/h3c_tx180x
- $(Device/dsa-migration)
- BLOCKSIZE := 128k
- PAGESIZE := 2048
+ $(Device/nand)
KERNEL_SIZE := 8192k
IMAGE_SIZE := 120832k
- UBINIZE_OPTS := -E 5
KERNEL_LOADADDR := 0x82000000
KERNEL_INITRAMFS := kernel-bin | relocate-kernel 0x80001000 | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
KERNEL := $$(KERNEL_INITRAMFS) | h3c-blank-header
- IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
DEVICE_VENDOR := H3C
DEVICE_PACKAGES := kmod-mt7915-firmware
endef
@@ -1069,12 +1031,8 @@ endef
TARGET_DEVICES += h3c_tx1806
define Device/haier-sim_wr1800k
- $(Device/dsa-migration)
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- KERNEL_SIZE := 4096k
+ $(Device/nand)
IMAGE_SIZE := 125440k
- UBINIZE_OPTS := -E 5
KERNEL_LOADADDR := 0x82000000
KERNEL := kernel-bin | relocate-kernel 0x80001000 | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
@@ -1083,7 +1041,6 @@ ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
ARTIFACT/initramfs-factory.bin := append-image-stage initramfs-kernel.bin | \
haier-sim_wr1800k-factory
endif
- IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
DEVICE_PACKAGES := kmod-mt7915-firmware
endef
@@ -1105,15 +1062,10 @@ endef
TARGET_DEVICES += hilink_hlk-7621a-evb
define Device/hiwifi_hc5962
- $(Device/dsa-migration)
+ $(Device/nand)
$(Device/uimage-lzma-loader)
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- KERNEL_SIZE := 4096k
- UBINIZE_OPTS := -E 5
IMAGE_SIZE := 32768k
IMAGES += factory.bin
- IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | \
check-size
DEVICE_VENDOR := HiWiFi
@@ -1167,16 +1119,11 @@ endef
TARGET_DEVICES += iodata_wn-ax1167gr
define Device/iodata_nand
- $(Device/dsa-migration)
+ $(Device/nand)
DEVICE_VENDOR := I-O DATA
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- UBINIZE_OPTS := -E 5
- KERNEL_SIZE := 4096k
IMAGE_SIZE := 51200k
LOADER_TYPE := bin
KERNEL := kernel-bin | append-dtb | lzma | loader-kernel | lzma | uImage lzma
- IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
# The OEM webinterface expects an kernel with initramfs which has the uImage
@@ -1277,16 +1224,11 @@ endef
TARGET_DEVICES += iptime_a3004ns-dual
define Device/iptime_a3004t
- $(Device/dsa-migration)
+ $(Device/nand)
$(Device/uimage-lzma-loader)
- BLOCKSIZE := 128k
- PAGESIZE := 2048
FILESYSTEMS := squashfs
- KERNEL_SIZE := 4096k
IMAGE_SIZE := 129280k
UIMAGE_NAME := a3004t
- UBINIZE_OPTS := -E 5
- IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
DEVICE_VENDOR := ipTIME
DEVICE_MODEL := A3004T
DEVICE_PACKAGES := kmod-mt7615-firmware kmod-usb3 -uboot-envtools
@@ -1326,17 +1268,12 @@ endef
TARGET_DEVICES += iptime_a8004t
define Device/iptime_ax2004m
- $(Device/dsa-migration)
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- KERNEL_SIZE := 4096k
+ $(Device/nand)
IMAGE_SIZE := 121344k
- UBINIZE_OPTS := -E 5
KERNEL_LOADADDR := 0x82000000
KERNEL := kernel-bin | relocate-kernel 0x80001000 | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
IMAGES += recovery.bin
- IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
IMAGE/recovery.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | \
check-size | iptime-crc32 ax2004m
DEVICE_VENDOR := ipTIME
@@ -1346,14 +1283,9 @@ endef
TARGET_DEVICES += iptime_ax2004m
define Device/iptime_t5004
- $(Device/dsa-migration)
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- KERNEL_SIZE := 4096k
+ $(Device/nand)
IMAGE_SIZE := 129280k
- UBINIZE_OPTS := -E 5
UIMAGE_NAME := t5004
- IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
DEVICE_VENDOR := ipTIME
DEVICE_MODEL := T5004
DEVICE_PACKAGES := -wpad-basic-mbedtls -uboot-envtools
@@ -1374,15 +1306,10 @@ endef
TARGET_DEVICES += jcg_jhr-ac876m
define Device/jcg_q20
- $(Device/dsa-migration)
+ $(Device/nand)
$(Device/uimage-lzma-loader)
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- UBINIZE_OPTS := -E 5
- KERNEL_SIZE := 4096k
IMAGE_SIZE := 91136k
IMAGES += factory.bin
- IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | \
check-size
DEVICE_VENDOR := JCG
@@ -1431,18 +1358,13 @@ endef
TARGET_DEVICES += lenovo_newifi-d1
define Device/linksys_e5600
- $(Device/dsa-migration)
+ $(Device/nand)
$(Device/uimage-lzma-loader)
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- KERNEL_SIZE := 4096k
IMAGE_SIZE := 26624k
DEVICE_VENDOR := Linksys
DEVICE_MODEL := E5600
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e kmod-mt7663-firmware-ap
- UBINIZE_OPTS := -E 5
IMAGES += factory.bin
- IMAGE/sysupgrade.bin := sysupgrade-tar | check-size | append-metadata
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | \
append-ubi | check-size | gemtek-trailer
endef
@@ -1458,17 +1380,12 @@ endef
TARGET_DEVICES += linksys_e7350
define Device/linksys_ea7xxx
- $(Device/dsa-migration)
+ $(Device/nand)
$(Device/uimage-lzma-loader)
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- KERNEL_SIZE := 4096k
IMAGE_SIZE := 36864k
DEVICE_VENDOR := Linksys
DEVICE_PACKAGES := kmod-usb3 kmod-mt7615-firmware
- UBINIZE_OPTS := -E 5
IMAGES := sysupgrade.bin factory.bin
- IMAGE/sysupgrade.bin := sysupgrade-tar | check-size | append-metadata
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | \
append-ubi | check-size | linksys-image type=$$$$(LINKSYS_HWNAME)
endef
@@ -1651,22 +1568,18 @@ endef
TARGET_DEVICES += mtc_wr1201
define Device/mts_wg430223
- $(Device/dsa-migration)
+ $(Device/nand)
$(Device/uimage-lzma-loader)
DEVICE_VENDOR := MTS
DEVICE_MODEL := WG430223
IMAGE_SIZE := 32768k
KERNEL_SIZE := 4352k
- UBINIZE_OPTS := -E 5
- BLOCKSIZE := 128k
- PAGESIZE := 2048
KERNEL := kernel-bin | append-dtb | lzma | loader-kernel | \
uImage none | arcadyan-trx 0x53485231 | pad-to $$(KERNEL_SIZE)
KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | loader-kernel | \
uImage none
IMAGES += factory.trx
IMAGE/factory.trx := append-kernel | append-ubi | check-size
- IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
DEVICE_PACKAGES := kmod-mt7615-firmware uencrypt-mbedtls
endef
TARGET_DEVICES += mts_wg430223
@@ -1685,17 +1598,12 @@ endef
TARGET_DEVICES += netgear_ex6150
define Device/netgear_sercomm_nand
- $(Device/dsa-migration)
+ $(Device/nand)
$(Device/uimage-lzma-loader)
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- KERNEL_SIZE := 4096k
- UBINIZE_OPTS := -E 5
IMAGES += factory.img kernel.bin rootfs.bin
IMAGE/factory.img := pad-extra 2048k | append-kernel | pad-to 6144k | \
append-ubi | pad-to $$$$(BLOCKSIZE) | sercom-footer | pad-to 128 | \
zip $$$$(SERCOMM_HWNAME).bin | sercom-seal
- IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
IMAGE/kernel.bin := append-kernel
IMAGE/rootfs.bin := append-ubi | check-size
DEVICE_VENDOR := NETGEAR
@@ -1846,17 +1754,13 @@ endef
TARGET_DEVICES += netgear_wac124
define Device/netgear_wax202
- $(Device/dsa-migration)
+ $(Device/nand)
DEVICE_VENDOR := NETGEAR
DEVICE_MODEL := WAX202
DEVICE_PACKAGES := kmod-mt7915-firmware -uboot-envtools
NETGEAR_ENC_MODEL := WAX202
NETGEAR_ENC_REGION := US
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- UBINIZE_OPTS := -E 5
IMAGE_SIZE := 38912k
- KERNEL_SIZE := 4096k
KERNEL_LOADADDR := 0x82000000
KERNEL := kernel-bin | relocate-kernel 0x80001000 | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb | \
@@ -1864,7 +1768,6 @@ define Device/netgear_wax202
IMAGES += factory.img
IMAGE/factory.img := append-kernel | pad-to $$(KERNEL_SIZE) | \
append-ubi | check-size | netgear-encrypted-factory
- IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += netgear_wax202
@@ -1887,18 +1790,13 @@ endef
TARGET_DEVICES += netgear_wndr3700-v5
define Device/netis_wf2881
- $(Device/dsa-migration)
+ $(Device/nand)
$(Device/uimage-lzma-loader)
- BLOCKSIZE := 128k
- PAGESIZE := 2048
FILESYSTEMS := squashfs
- KERNEL_SIZE := 4096k
IMAGE_SIZE := 129280k
- UBINIZE_OPTS := -E 5
UIMAGE_NAME := WF2881_0.0.00
KERNEL_INITRAMFS := $$(KERNEL) | netis-tail WF2881
IMAGES += factory.bin
- IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | \
check-size
DEVICE_VENDOR := NETIS
@@ -1942,14 +1840,9 @@ endef
TARGET_DEVICES += planex_vr500
define Device/raisecom_msg1500-x-00
- $(Device/dsa-migration)
+ $(Device/nand)
$(Device/uimage-lzma-loader)
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- KERNEL_SIZE := 4096k
IMAGE_SIZE := 129280k
- UBINIZE_OPTS := -E 5
- IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
DEVICE_VENDOR := RAISECOM
DEVICE_MODEL := MSG1500
DEVICE_VARIANT := X.00
@@ -1996,13 +1889,8 @@ endef
TARGET_DEVICES += samknows_whitebox-v8
define Device/sercomm_na502
- $(Device/uimage-lzma-loader)
- BLOCKSIZE := 128k
- PAGESIZE := 2048
+ $(Device/nand)
IMAGE_SIZE := 20480k
- IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
- UBINIZE_OPTS := -E 5
- KERNEL_SIZE := 4096k
DEVICE_VENDOR := SERCOMM
DEVICE_MODEL := NA502
DEVICE_PACKAGES := kmod-mt76x2 kmod-mt7603 kmod-usb3 -uboot-envtools
@@ -2010,13 +1898,8 @@ endef
TARGET_DEVICES += sercomm_na502
define Device/sercomm_na502s
- $(Device/uimage-lzma-loader)
- BLOCKSIZE := 128k
- PAGESIZE := 2048
+ $(Device/nand)
IMAGE_SIZE := 20971520
- IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
- UBINIZE_OPTS := -E 5
- KERNEL_SIZE := 4096k
DEVICE_VENDOR := SERCOMM
DEVICE_MODEL := NA502S
DEVICE_PACKAGES := kmod-mt76x2 kmod-mt7603 kmod-usb3 kmod-usb-serial \
@@ -2232,12 +2115,8 @@ endef
TARGET_DEVICES += tplink_eap615-wall-v1
define Device/tplink_ec330-g5u-v1
- $(Device/dsa-migration)
+ $(Device/nand)
LOADER := bin
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- UBINIZE_OPTS := -E 5
- KERNEL_SIZE := 4096k
IMAGE_SIZE := 49152k
DEVICE_VENDOR := TP-Link
DEVICE_MODEL := EC330-G5u
@@ -2254,24 +2133,19 @@ define Device/tplink_ec330-g5u-v1
IMAGES += factory.bin
IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | \
append-ubi | check-size
- IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata | check-size
endef
TARGET_DEVICES += tplink_ec330-g5u-v1
define Device/tplink_er605-v2
- $(Device/dsa-migration)
+ $(Device/nand)
DEVICE_VENDOR := TP-Link
DEVICE_MODEL := ER605
DEVICE_VARIANT := v2
DEVICE_PACKAGES := -wpad-basic-mbedtls kmod-usb3 -uboot-envtools
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- KERNEL_SIZE := 4096k
KERNEL_IN_UBI := 1
KERNEL_LOADADDR := 0x82000000
KERNEL := kernel-bin | relocate-kernel 0x80001000 | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
IMAGES += sysupgrade.tar
- IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
IMAGE_SIZE := 127744k
endef
TARGET_DEVICES += tplink_er605-v2
@@ -2550,17 +2424,12 @@ endef
TARGET_DEVICES += winstars_ws-wn583a6
define Device/xiaomi_nand_separate
- $(Device/dsa-migration)
+ $(Device/nand)
$(Device/uimage-lzma-loader)
DEVICE_VENDOR := Xiaomi
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- KERNEL_SIZE := 4096k
- UBINIZE_OPTS := -E 5
IMAGES += kernel1.bin rootfs0.bin
IMAGE/kernel1.bin := append-kernel
IMAGE/rootfs0.bin := append-ubi | check-size
- IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
define Device/xiaomi_mi-router-3g
@@ -2586,17 +2455,12 @@ endef
TARGET_DEVICES += xiaomi_mi-router-3g-v2
define Device/xiaomi_mi-router-3-pro
- $(Device/dsa-migration)
+ $(Device/nand)
$(Device/uimage-lzma-loader)
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- KERNEL_SIZE:= 4096k
- UBINIZE_OPTS := -E 5
IMAGE_SIZE := 255488k
DEVICE_VENDOR := Xiaomi
DEVICE_MODEL := Mi Router 3 Pro
IMAGES += factory.bin
- IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | \
check-size
DEVICE_PACKAGES := kmod-mt7615-firmware kmod-usb3 kmod-usb-ledtrig-usbport
@@ -2644,16 +2508,11 @@ endef
TARGET_DEVICES += xiaomi_mi-router-ac2100
define Device/xiaomi_mi-router-cr660x
- $(Device/dsa-migration)
+ $(Device/nand)
$(Device/uimage-lzma-loader)
DEVICE_VENDOR := Xiaomi
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- KERNEL_SIZE := 4096k
- UBINIZE_OPTS := -E 5
IMAGE_SIZE := 128512k
IMAGES += firmware.bin
- IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
IMAGE/firmware.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | \
check-size
DEVICE_PACKAGES += kmod-mt7915-firmware
@@ -2879,12 +2738,10 @@ endef
TARGET_DEVICES += zio_freezio
define Device/zyxel_lte3301-plus
- $(Device/dsa-migration)
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- UBINIZE_OPTS := -E 5
+ $(Device/nand)
DEVICE_VENDOR := ZyXEL
DEVICE_MODEL := LTE3301-PLUS
+ KERNEL_SIZE := 31488k
DEVICE_PACKAGES := kmod-mt7615-firmware kmod-usb3 kmod-usb-ledtrig-usbport \
kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
KERNEL := $(KERNEL_DTB) | uImage lzma | \
@@ -2892,38 +2749,30 @@ define Device/zyxel_lte3301-plus
KERNEL_INITRAMFS := $(KERNEL_DTB) | uImage lzma | \
zytrx-header $$(DEVICE_MODEL) 9.99(ABQU.1)$$(VERSION_DIST)-recovery
KERNEL_INITRAMFS_SUFFIX := -recovery.bin
- IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += zyxel_lte3301-plus
define Device/zyxel_nr7101
- $(Device/dsa-migration)
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- UBINIZE_OPTS := -E 5
+ $(Device/nand)
DEVICE_VENDOR := ZyXEL
DEVICE_MODEL := NR7101
+ KERNEL_SIZE := 31488k
DEVICE_PACKAGES := kmod-mt7603 kmod-usb3 kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
KERNEL := $(KERNEL_DTB) | uImage lzma | zytrx-header $$(DEVICE_MODEL) $$(VERSION_DIST)-$$(REVISION)
KERNEL_INITRAMFS := $(KERNEL_DTB) | uImage lzma | zytrx-header $$(DEVICE_MODEL) 9.99(ABUV.9)$$(VERSION_DIST)-recovery
KERNEL_INITRAMFS_SUFFIX := -recovery.bin
- IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += zyxel_nr7101
define Device/zyxel_nwa-ax
- $(Device/dsa-migration)
+ $(Device/nand)
DEVICE_VENDOR := ZyXEL
- BLOCKSIZE := 128k
- PAGESIZE := 2048
KERNEL_SIZE := 8192k
- UBINIZE_OPTS := -E 5
DEVICE_PACKAGES := kmod-mt7915-firmware zyxel-bootconfig
KERNEL := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
IMAGES += factory.bin ramboot-factory.bin
IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | zyxel-nwa-fit
IMAGE/ramboot-factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi
- IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
define Device/zyxel_nwa50ax
@@ -2939,33 +2788,24 @@ endef
TARGET_DEVICES += zyxel_nwa55axe
define Device/zyxel_wap6805
- $(Device/dsa-migration)
+ $(Device/nand)
$(Device/uimage-lzma-loader)
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- KERNEL_SIZE := 4096k
- UBINIZE_OPTS := -E 5
IMAGE_SIZE := 32448k
DEVICE_VENDOR := ZyXEL
DEVICE_MODEL := WAP6805
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7621-qtn-rgmii -uboot-envtools
KERNEL := $$(KERNEL/lzma-loader) | uImage none | uimage-padhdr 160
- IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += zyxel_wap6805
define Device/zyxel_wsm20
- $(Device/dsa-migration)
- BLOCKSIZE := 128k
- PAGESIZE := 2048
+ $(Device/nand)
KERNEL_SIZE := 8192k
IMAGE_SIZE := 41943040
- UBINIZE_OPTS := -E 5
DEVICE_VENDOR := ZyXEL
DEVICE_MODEL := WSM20
DEVICE_PACKAGES := kmod-mt7915-firmware
KERNEL := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb | znet-header V1.00(ABZF.0)C0
KERNEL_INITRAMFS := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb | znet-header V1.00(ABZF.0)C0
- IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += zyxel_wsm20
More information about the lede-commits
mailing list