[openwrt/openwrt] ath79: add support for MikroTik RB951Ui-2HnD
LEDE Commits
lede-commits at lists.infradead.org
Tue May 16 05:55:44 PDT 2023
ynezz pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/95577e7bd108b5c70e5c757ce5b73545e068b8d6
commit 95577e7bd108b5c70e5c757ce5b73545e068b8d6
Author: Michał Kępień <openwrt at kempniu.pl>
AuthorDate: Tue Apr 18 15:48:41 2023 +0200
ath79: add support for MikroTik RB951Ui-2HnD
MikroTik RB951Ui-2HnD is a wireless SOHO router that was previously
supported by the ar71xx target, see commit d19b868b12 ("ar71xx: Add
support for MikroTik RB951Ui-2HnD").
Specifications
--------------
- SoC: Atheros AR9344 (600 MHz)
- RAM: 128 MB (2x 64 MB)
- Storage: 128 MB NAND flash (various manufacturers)
- Ethernet: Atheros AR8229 switch, 5x 10/100 Mbit/s
- 1x PoE in (port 1, 8-30 V input)
- 1x PoE out (port 5, 500 mA output)
- Wireless: Atheros AR9340 (802.11b/g/n)
- USB: 2.0 (1A)
- 9x LED:
- 1x power (green, not configurable)
- 1x user (green)
- 5x FE ports (green)
- 1x wireless (green)
- 1x PoE out (red)
- 1x button (restart)
See https://mikrotik.com/product/RB951Ui-2HnD for more details.
Flashing
--------
TFTP boot initramfs image and then perform sysupgrade. Follow
common MikroTik procedures at https://openwrt.org/toh/mikrotik/common.
Signed-off-by: Michał Kępień <openwrt at kempniu.pl>
---
.../dts/ar9344_mikrotik_routerboard-951ui-2hnd.dts | 153 +++++++++++++++++++++
target/linux/ath79/image/mikrotik.mk | 9 ++
.../ath79/mikrotik/base-files/etc/board.d/01_leds | 1 +
.../mikrotik/base-files/etc/board.d/02_network | 1 +
.../etc/hotplug.d/firmware/10-ath9k-eeprom | 3 +
.../mikrotik/base-files/lib/upgrade/platform.sh | 1 +
6 files changed, 168 insertions(+)
diff --git a/target/linux/ath79/dts/ar9344_mikrotik_routerboard-951ui-2hnd.dts b/target/linux/ath79/dts/ar9344_mikrotik_routerboard-951ui-2hnd.dts
new file mode 100644
index 0000000000..3d59a30f11
--- /dev/null
+++ b/target/linux/ath79/dts/ar9344_mikrotik_routerboard-951ui-2hnd.dts
@@ -0,0 +1,153 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9344_mikrotik_routerboard.dtsi"
+
+/ {
+ compatible = "mikrotik,routerboard-951ui-2hnd", "qca,ar9344";
+ model = "Mikrotik RouterBOARD 951Ui-2HnD";
+
+ /delete-node/ leds;
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_user: user {
+ label = "green:user";
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ };
+
+ port1 {
+ label = "green:port1";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ };
+
+ port2 {
+ label = "green:port2";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ };
+
+ port3 {
+ label = "green:port3";
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ };
+
+ port4 {
+ label = "green:port4";
+ gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
+ };
+
+ port5 {
+ label = "green:port5";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-export {
+ compatible = "gpio-export";
+
+ gpio_poe_power {
+ gpio-export,name = "rb951ui2hnd:power:poe";
+ gpio-export,output = <1>;
+ gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
+ };
+
+ gpio_usb_power {
+ gpio-export,name = "rb951ui2hnd:power:usb";
+ gpio-export,output = <1>;
+ gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&gpio {
+ nand_power {
+ gpio-hog;
+ gpios = <14 GPIO_ACTIVE_LOW>;
+ output-high;
+ };
+};
+
+&nand {
+ status = "okay";
+
+ nand-ecc-mode = "soft";
+ qca,nand-swap-dma;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition at 0 {
+ label = "booter";
+ reg = <0x0000000 0x0040000>;
+ read-only;
+ };
+
+ partition at 40000 {
+ label = "kernel";
+ reg = <0x0040000 0x03c0000>;
+ };
+
+ partition at 400000 {
+ label = "ubi";
+ reg = <0x0400000 0x7c00000>;
+ };
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash at 0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "mikrotik,routerboot-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition at 0 {
+ label = "routerboot";
+ reg = <0x0 0x0>;
+ read-only;
+ };
+
+ hard_config: hard_config {
+ read-only;
+ };
+
+ bios {
+ size = <0x1000>;
+ read-only;
+ };
+
+ soft_config {
+ };
+ };
+ };
+};
+
+ð0 {
+ phy-handle = <&swphy4>;
+
+ /delete-node/ gmac-config;
+};
+
+ð1 {
+ compatible = "qca,ar9340-eth", "syscon";
+};
+
+&wmac {
+ qca,led-pin = /bits/ 8 <11>;
+};
+
+&usb {
+ status = "okay";
+};
+
+&usb_phy {
+ status = "okay";
+};
diff --git a/target/linux/ath79/image/mikrotik.mk b/target/linux/ath79/image/mikrotik.mk
index fb0035fb65..3f65b35c8c 100644
--- a/target/linux/ath79/image/mikrotik.mk
+++ b/target/linux/ath79/image/mikrotik.mk
@@ -48,6 +48,15 @@ define Device/mikrotik_routerboard-922uags-5hpacd
endef
TARGET_DEVICES += mikrotik_routerboard-922uags-5hpacd
+define Device/mikrotik_routerboard-951ui-2hnd
+ $(Device/mikrotik_nand)
+ SOC := ar9344
+ DEVICE_MODEL := RouterBOARD 951Ui-2HnD
+ DEVICE_PACKAGES += kmod-usb-ohci kmod-usb2
+ SUPPORTED_DEVICES += rb-951ui-2hnd
+endef
+TARGET_DEVICES += mikrotik_routerboard-951ui-2hnd
+
define Device/mikrotik_routerboard-951ui-2nd
$(Device/mikrotik_nor)
SOC := qca9531
diff --git a/target/linux/ath79/mikrotik/base-files/etc/board.d/01_leds b/target/linux/ath79/mikrotik/base-files/etc/board.d/01_leds
index 4c1b98fff2..31346ebdf5 100644
--- a/target/linux/ath79/mikrotik/base-files/etc/board.d/01_leds
+++ b/target/linux/ath79/mikrotik/base-files/etc/board.d/01_leds
@@ -16,6 +16,7 @@ mikrotik,routerboard-lhg-5nd)
ucidef_set_led_rssi "rssimediumhigh" "rssimediumhigh" "green:rssimediumhigh" "wlan0" "60" "100"
ucidef_set_led_rssi "rssihigh" "rssihigh" "green:rssihigh" "wlan0" "80" "100"
;;
+mikrotik,routerboard-951ui-2hnd|\
mikrotik,routerboard-951ui-2nd|\
mikrotik,routerboard-952ui-5ac2nd)
ucidef_set_led_netdev "port1" "port1" "green:port1" "eth1"
diff --git a/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network b/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network
index da63347c3c..aba811fb2d 100644
--- a/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network
@@ -25,6 +25,7 @@ ath79_setup_interfaces()
mikrotik,routerboard-wapr-2nd)
ucidef_set_interface_lan "eth0"
;;
+ mikrotik,routerboard-951ui-2hnd|\
mikrotik,routerboard-951ui-2nd|\
mikrotik,routerboard-952ui-5ac2nd)
ucidef_set_interface_wan "eth1"
diff --git a/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
index e0bf1e47ef..b23bd05bcd 100644
--- a/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
+++ b/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
@@ -46,6 +46,9 @@ case "$FIRMWARE" in
mikrotik,routerboard-962uigs-5hact2hnt)
caldata_mikrotik_ath9k 0x1000 0x440 $(macaddr_add "$mac_base" 7)
;;
+ mikrotik,routerboard-951ui-2hnd)
+ caldata_mikrotik_ath9k 0x1000 0x440 $(macaddr_add "$mac_base" +11)
+ ;;
*)
caldata_die "board $board is not supported yet"
;;
diff --git a/target/linux/ath79/mikrotik/base-files/lib/upgrade/platform.sh b/target/linux/ath79/mikrotik/base-files/lib/upgrade/platform.sh
index 93a9c3a855..cefbc5d334 100644
--- a/target/linux/ath79/mikrotik/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ath79/mikrotik/base-files/lib/upgrade/platform.sh
@@ -33,6 +33,7 @@ platform_do_upgrade() {
mikrotik,routerboard-912uag-2hpnd|\
mikrotik,routerboard-921gs-5hpacd-15s|\
mikrotik,routerboard-922uags-5hpacd|\
+ mikrotik,routerboard-951ui-2hnd|\
mikrotik,routerboard-sxt-5nd-r2)
platform_do_upgrade_mikrotik_nand "$1"
;;
More information about the lede-commits
mailing list