[openwrt/openwrt] kirkwood: Replace dtses with upstream accepted
LEDE Commits
lede-commits at lists.infradead.org
Sat May 13 15:09:15 PDT 2023
chunkeey pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/749237967a122a40465b65c7e9eb6924d8fe09c4
commit 749237967a122a40465b65c7e9eb6924d8fe09c4
Author: Pawel Dembicki <paweldembicki at gmail.com>
AuthorDate: Thu May 11 17:02:43 2023 +0200
kirkwood: Replace dtses with upstream accepted
DTSes from of three boards was sent and accpeted upstream. Let's use
backport patches with small OpenWrt tweak like other upstream stuff.
List of boards:
- Zyxel NSA310S
- Endian 4i Edge 200
- Ctera C-200 V1
Signed-off-by: Pawel Dembicki <paweldembicki at gmail.com>
---
.../arch/arm/boot/dts/kirkwood-4i-edge-200.dts | 218 -------------
.../files/arch/arm/boot/dts/kirkwood-c200-v1.dts | 303 ------------------
.../files/arch/arm/boot/dts/kirkwood-nsa310s.dts | 271 ----------------
.../001-5.18-Add-Ctera-C-200-V1-board.patch | 350 +++++++++++++++++++++
...-ARM-dts-kirkwood-Add-Zyxel-NSA310S-board.patch | 301 ++++++++++++++++++
...dts-kirkwood-Add-Endian-4i-Edge-200-board.patch | 249 +++++++++++++++
.../kirkwood/patches-5.15/114-ctera-c-200-v1.patch | 51 +++
.../linux/kirkwood/patches-5.15/115-nsa310s.patch | 35 +++
.../kirkwood/patches-5.15/116-4i-edge-200.patch | 34 ++
9 files changed, 1020 insertions(+), 792 deletions(-)
diff --git a/target/linux/kirkwood/files/arch/arm/boot/dts/kirkwood-4i-edge-200.dts b/target/linux/kirkwood/files/arch/arm/boot/dts/kirkwood-4i-edge-200.dts
deleted file mode 100644
index 8e6c198c5e..0000000000
--- a/target/linux/kirkwood/files/arch/arm/boot/dts/kirkwood-4i-edge-200.dts
+++ /dev/null
@@ -1,218 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Endian 4i Edge 200 Board Description
- * Note: Endian UTM Mini is hardware clone of Endian Edge 200
- * Copyright 2021 Pawel Dembicki <paweldembicki at gmail.com>
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
- model = "Endian 4i Edge 200";
- compatible = "endian,4i-edge-200", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
- memory {
- device_type = "memory";
- reg = <0x00000000 0x20000000>;
- };
-
- aliases {
- led-boot = &led_status_green;
- led-failsafe = &led_status_orange;
- led-running = &led_status_green;
- led-upgrade = &led_status_orange;
- };
-
- chosen {
- bootargs = "console=ttyS0,115200n8";
- stdout-path = &uart0;
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-0 = <&pmx_led49 &pmx_led35 &pmx_led34>;
- pinctrl-names = "default";
-
- led_status_green: status_green {
- label = "green:status";
- gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
- };
-
- led_status_orange: status_orange {
- label = "orange:status";
- gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
- };
-
- sdcard {
- label = "orange:sdcard";
- gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "mmc0";
- };
- };
-};
-
-ð0 {
- status = "okay";
-};
-
-ð0port {
- speed = <1000>;
- duplex = <1>;
-};
-
-ð1 {
- status = "okay";
-};
-
-ð1port {
- phy-handle = <ðphyb>;
-};
-
-&mdio {
- status = "okay";
-
- ethphyb: ethernet-phy at b {
- reg = <0x0b>;
-
- marvell,reg-init =
- /* link-activity, bi-color mode 4 */
- <3 0x10 0xfff0 0xf>; /* Reg 3,16 <- 0xzzzf */
- };
-
- switch0: switch at 11 {
- compatible = "marvell,mv88e6085";
- reg = <0x11>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port at 0 {
- reg = <0>;
- label = "port1";
- };
-
- port at 1 {
- reg = <1>;
- label = "port2";
- };
-
- port at 2 {
- reg = <2>;
- label = "port3";
- };
-
- port at 3 {
- reg = <3>;
- label = "port4";
- };
-
- port at 5 {
- reg = <5>;
- phy-mode = "rgmii-id";
- ethernet = <ð0port>;
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
- };
- };
- };
-};
-
-&nand {
- status = "okay";
- pinctrl-0 = <&pmx_nand>;
- pinctrl-names = "default";
-
- partition at 0 {
- label = "u-boot";
- reg = <0x00000000 0x000a0000>;
- read-only;
- };
-
- partition at a0000 {
- label = "u-boot-env";
- reg = <0x000a0000 0x00060000>;
- read-only;
- };
-
- partition at 100000 {
- label = "kernel";
- reg = <0x00100000 0x00400000>;
- };
-
- partition at 500000 {
- label = "ubi";
- reg = <0x00500000 0x1fb00000>;
- };
-};
-
-&pciec {
- status = "okay";
-};
-
-&pcie0 {
- status = "okay";
-};
-
-&pinctrl {
- pinctrl-0 = <&pmx_sysrst>;
- pinctrl-names = "default";
-
- pmx_sysrst: pmx-sysrst {
- marvell,pins = "mpp6";
- marvell,function = "sysrst";
- };
-
- pmx_sdio_cd: pmx-sdio-cd {
- marvell,pins = "mpp28";
- marvell,function = "gpio";
- };
-
- pmx_led34: pmx_led34 {
- marvell,pins = "mpp34";
- marvell,function = "gpio";
- };
-
- pmx_led35: pmx_led35 {
- marvell,pins = "mpp35";
- marvell,function = "gpio";
- };
-
- pmx_led49: pmx_led49 {
- marvell,pins = "mpp49";
- marvell,function = "gpio";
- };
-};
-
-&rtc {
- status = "okay";
-};
-
-&sata_phy0 {
- status = "disabled";
-};
-
-&sata_phy1 {
- status = "disabled";
-};
-
-&sdio {
- pinctrl-0 = <&pmx_sdio_cd>;
- pinctrl-names = "default";
- status = "okay";
- cd-gpios = <&gpio0 28 9>;
-};
-
-&uart0 {
- status = "okay";
-};
-
-&usb0 {
- status = "okay";
-};
diff --git a/target/linux/kirkwood/files/arch/arm/boot/dts/kirkwood-c200-v1.dts b/target/linux/kirkwood/files/arch/arm/boot/dts/kirkwood-c200-v1.dts
deleted file mode 100644
index 9ff73382b3..0000000000
--- a/target/linux/kirkwood/files/arch/arm/boot/dts/kirkwood-c200-v1.dts
+++ /dev/null
@@ -1,303 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Ctera C200 V1 Board Description
- * Copyright 2021 Pawel Dembicki <paweldembicki at gmail.com>
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
- model = "Ctera C200 V1";
- compatible = "ctera,c200-v1", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
- aliases {
- led-boot = &led_status_green;
- led-failsafe = &led_status_red;
- led-running = &led_status_green;
- led-upgrade = &led_status_red;
- };
-
- chosen {
- bootargs = "console=ttyS0,115200";
- stdout-path = &uart0;
- };
-
- memory at 0 {
- device_type = "memory";
- reg = <0x00000000 0x20000000>;
- };
-
- keys {
- compatible = "gpio-keys";
- pinctrl-0 = <&pmx_buttons>;
- pinctrl-names = "default";
-
- power {
- label = "Power Button";
- linux,code = <KEY_POWER>;
- gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
- };
-
- reset {
- label = "Reset Button";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
- };
-
- usb1 {
- label = "USB1 Button";
- linux,code = <BTN_0>;
- gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
- };
-
- usb2 {
- label = "USB2 Button";
- linux,code = <BTN_1>;
- gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
- };
- };
-
- gpio-poweroff {
- compatible = "gpio-poweroff";
- pinctrl-0 = <&pmx_poweroff>;
- pinctrl-names = "default";
- gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-0 = <&pmx_leds>;
- pinctrl-names = "default";
-
- led_status_green: status-green {
- label = "green:status";
- gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
- };
-
- led_status_red: status-red {
- label = "red:status";
- gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
- };
-
- cloud-blue {
- label = "blue:cloud";
- gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
- };
-
- disk1-green {
- label = "green:disk1";
- gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "ata1";
- };
-
- disk1-red {
- label = "red:disk1";
- gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
- };
-
- disk2-green {
- label = "green:disk2";
- gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "ata2";
- };
-
- disk2-red {
- label = "red:disk2";
- gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
- };
-
- disk-fail-green {
- label = "green:disk-fail";
- gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
- };
-
- disk-fail-red {
- label = "red:disk-fail";
- gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
- };
-
- usb1-green {
- label = "green:usb1";
- gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "usbport";
- trigger-sources = <&hub_port2>;
- };
-
- usb1-red {
- label = "red:usb1";
- gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
- };
-
- usb2-green {
- label = "green:usb2";
- gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "usbport";
- trigger-sources = <&hub_port1>;
- };
-
- usb2-red {
- label = "red:usb2";
- gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-ð0 {
- status = "okay";
-};
-
-ð0port {
- phy-handle = <ðphy9>;
-};
-
-&i2c0 {
- status = "okay";
-
- rtc at 30 {
- compatible = "s35390a";
- reg = <0x30>;
- };
-
- lm63 at 4c {
- compatible = "national,lm63";
- reg = <0x4c>;
- };
-};
-
-&mdio {
- status = "okay";
-
- ethphy9: ethernet-phy at 9 {
- reg = <9>;
- };
-};
-
-&nand {
- status = "okay";
- chip-delay = <40>;
-
- partition at 0 {
- label = "uboot";
- reg = <0x0000000 0x200000>;
- };
-
- partition at 200000 {
- label = "certificate";
- reg = <0x0200000 0x100000>;
- };
-
- partition at 300000 {
- label = "preset_cfg";
- reg = <0x0300000 0x100000>;
- };
-
- partition at 400000 {
- label = "dev_params";
- reg = <0x0400000 0x100000>;
- };
- partition at 500000 {
- label = "active_bank";
- reg = <0x0500000 0x0100000>;
- };
-
- partition at 600000 {
- label = "magic";
- reg = <0x0600000 0x0100000>;
- };
-
- partition at 700000 {
- label = "bank1";
- reg = <0x0700000 0x2800000>;
- };
-
- partition at 2f00000 {
- label = "bank2";
- reg = <0x2f00000 0x2800000>;
- };
-
- /* 0x5700000-0x5a00000 undefined in vendor firmware */
-
- partition at 5a00000 {
- label = "reserved";
- reg = <0x5a00000 0x2000000>;
- };
-
- partition at 7a00000 {
- label = "ubi";
- reg = <0x7a00000 0x8600000>;
- };
-};
-
-&pciec {
- status = "okay";
-};
-
-&pcie0 {
- status = "okay";
-};
-
-&pinctrl {
- /* buzzer gpios are connected to two pins of buzzer
- * leave it as is due lack of proper driver
- */
- pmx_buzzer: pmx-buzzer {
- marvell,pins = "mpp12", "mpp13";
- marvell,function = "gpio";
- };
-
- pmx_leds: pmx-leds {
- marvell,pins = "mpp14", "mpp15", "mpp16", "mpp17", "mpp38",
- "mpp39", "mpp40", "mpp42", "mpp43", "mpp44",
- "mpp45", "mpp46", "mpp47";
- marvell,function = "gpio";
- };
-
- pmx_buttons: pmx-buttons {
- marvell,pins = "mpp28", "mpp29", "mpp48", "mpp49";
- marvell,function = "gpio";
- };
-
- pmx_poweroff: pmx-poweroff {
- marvell,pins = "mpp34";
- marvell,function = "gpio";
- };
-};
-
-&rtc {
- status = "disabled";
-};
-
-&sata {
- status = "okay";
- nr-ports = <2>;
-};
-
-&uart0 {
- status = "okay";
-};
-
-&usb0 {
- #address-cells = <1>;
- #size-cells = <0>;
- status = "okay";
-
- port at 1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
- #trigger-source-cells = <0>;
-
- hub_port1: port at 1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
-
- hub_port2: port at 2 {
- reg = <2>;
- #trigger-source-cells = <0>;
- };
- };
-};
diff --git a/target/linux/kirkwood/files/arch/arm/boot/dts/kirkwood-nsa310s.dts b/target/linux/kirkwood/files/arch/arm/boot/dts/kirkwood-nsa310s.dts
deleted file mode 100644
index a72276ed72..0000000000
--- a/target/linux/kirkwood/files/arch/arm/boot/dts/kirkwood-nsa310s.dts
+++ /dev/null
@@ -1,271 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
- model = "ZyXEL NSA310S";
- compatible = "zyxel,nsa310s", "marvell,kirkwood-88f6702", "marvell,kirkwood";
-
- aliases {
- led-boot = &led_green_sys;
- led-failsafe = &led_red_sys;
- led-running = &led_green_sys;
- led-upgrade = &led_red_sys;
- };
-
- memory {
- device_type = "memory";
- reg = <0x00000000 0x10000000>;
- };
-
- chosen {
- bootargs = "console=ttyS0,115200n8 earlyprintk";
- stdout-path = &uart0;
- };
-
- ocp at f1000000 {
- pinctrl: pin-controller at 10000 {
- pinctrl-names = "default";
-
- pmx_usb_power: pmx-usb-power {
- marvell,pins = "mpp21";
- marvell,function = "gpio";
- };
-
- pmx_pwr_off: pmx-pwr-off {
- marvell,pins = "mpp27";
- marvell,function = "gpio";
- };
-
- pmx_btn_reset: pmx-btn-reset {
- marvell,pins = "mpp24";
- marvell,function = "gpio";
- };
-
- pmx_btn_copy: pmx-btn-copy {
- marvell,pins = "mpp25";
- marvell,function = "gpio";
- };
-
- pmx_btn_power: pmx-btn-power {
- marvell,pins = "mpp26";
- marvell,function = "gpio";
- };
-
- pmx_led_usb_green: pmx-led-usb-green {
- marvell,pins = "mpp15";
- marvell,function = "gpio";
- };
-
- pmx_led_copy_green: pmx-led-copy-green {
- marvell,pins = "mpp22";
- marvell,function = "gpio";
- };
-
- pmx_led_copy_red: pmx-led-copy-red {
- marvell,pins = "mpp23";
- marvell,function = "gpio";
- };
-
- pmx_led_sys_green: pmx-led-sys-green {
- marvell,pins = "mpp28";
- marvell,function = "gpio";
- };
-
- pmx_led_sys_red: pmx-led-sys-red {
- marvell,pins = "mpp29";
- marvell,function = "gpio";
- };
-
- pmx_led_hdd1_green: pmx-led-hdd1-green {
- marvell,pins = "mpp16";
- marvell,function = "gpio";
- };
-
- pmx_led_hdd1_red: pmx-led-hdd1-red {
- marvell,pins = "mpp13";
- marvell,function = "gpio";
- };
-
- pmx_pwr_sata1: pmx-pwr-sata1 {
- marvell,pins = "mpp33";
- marvell,function = "gpio";
- };
-
- };
-
- i2c at 11000 {
- status = "okay";
-
- rtc at 68 {
- compatible = "htk,ht1382";
- reg = <0x68>;
- };
- };
-
- serial at 12000 {
- status = "okay";
- };
- };
-
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-0 = <&pmx_usb_power &pmx_pwr_sata1>;
- pinctrl-names = "default";
-
- usb0_power: regulator at 1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "USB Power";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- regulator-boot-on;
- gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>;
- };
-
- sata1_power: regulator at 2 {
- compatible = "regulator-fixed";
- reg = <2>;
- regulator-name = "SATA1 Power";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- regulator-boot-on;
- gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>;
- };
- };
-
- keys {
- compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-0 = <&pmx_btn_reset &pmx_btn_copy &pmx_btn_power>;
- pinctrl-names = "default";
-
- power {
- label = "Power Button";
- linux,code = <KEY_POWER>;
- gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
- };
-
- copy {
- label = "Copy Button";
- linux,code = <KEY_COPY>;
- gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
- };
-
- reset {
- label = "Reset Button";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_green_sys: green-sys {
- label = "nsa310s:green:sys";
- gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-on";
- };
-
- led_red_sys: red-sys {
- label = "nsa310s:red:sys";
- gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
- };
-
- green-hdd1 {
- label = "nsa310s:green:hdd1";
- gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "ata1";
- };
-
- red-hdd1 {
- label = "nsa310s:red:hdd1";
- gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
- };
-
- green-usb {
- label = "nsa310s:green:usb";
- gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "usb-host";
- };
-
- green-copy {
- label = "nsa310s:green:copy";
- gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
- };
-
- red-copy {
- label = "nsa310s:red:copy";
- gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
- };
- };
-
- gpio_poweroff {
- compatible = "gpio-poweroff";
- pinctrl-0 = <&pmx_pwr_off>;
- pinctrl-names = "default";
- gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
- };
-};
-
-
-ð0 {
- status = "okay";
-
- ethernet0-port at 0 {
- phy-handle = <ðphy0>;
- };
-};
-
-&mdio {
- status = "okay";
-
- ethphy0: ethernet-phy at 1 {
- reg = <1>;
- phy-mode = "rgmii-id";
- marvell,reg-init = <0x1 0x16 0x0 0x3>,
- <0x1 0x10 0x0 0x1017>,
- <0x1 0x11 0x0 0x4408>,
- <0x1 0x16 0x0 0x0>;
- };
-};
-
-&nand {
- status = "okay";
- chip-delay = <35>;
-
- partition at 0 {
- label = "uboot";
- reg = <0x0000000 0x00c0000>;
- read-only;
- };
- partition at c0000 {
- label = "uboot_env";
- reg = <0x00c0000 0x0080000>;
- };
- partition at 140000 {
- label = "ubi";
- reg = <0x0140000 0x7ec0000>;
- };
-};
-
-&pciec {
- status = "okay";
-};
-
-&pcie0 {
- status = "okay";
-};
-
-&sata {
- status = "okay";
- nr-ports = <1>;
-};
diff --git a/target/linux/kirkwood/patches-5.15/001-5.18-Add-Ctera-C-200-V1-board.patch b/target/linux/kirkwood/patches-5.15/001-5.18-Add-Ctera-C-200-V1-board.patch
new file mode 100644
index 0000000000..453915e8cf
--- /dev/null
+++ b/target/linux/kirkwood/patches-5.15/001-5.18-Add-Ctera-C-200-V1-board.patch
@@ -0,0 +1,350 @@
+From 5fc74dbdf8f640a7ca7fb92345ac6fbeaa078d65 Mon Sep 17 00:00:00 2001
+From: Pawel Dembicki <paweldembicki at gmail.com>
+Date: Tue, 15 Feb 2022 17:39:22 +0100
+Subject: [PATCH] ARM: dts: kirkwood: Add Ctera C-200 V1 board
+
+Ctera C200 V1 is kirkwood-based 2-Bay NAS.
+
+Hardware:
+ - SoC: Marvell 88F6281-A1 ARMv5TE Processor 1.2GHz
+ - Ram: 512MB (4x Nanya NT5TU128M8GE-AC)
+ - NAND Flash: 256MB (Samsung 216 K9F2G08U0C)
+ - Lan: 1x GBE (Marvell 88E1116R-NNC1)
+ - Storage: 2x SATA HDD 3.5" Slot
+ - USB: 2x USB 2.0 port
+ - Console: Internal J3 connector (1: Vcc, 2: Rx, 3: Tx, 4: GND)
+ - LEDs: 13x GPIO controlled
+ - Buttons: 2x GPIO controlled
+
+Signed-off-by: Pawel Dembicki <paweldembicki at gmail.com>
+Reviewed-by: Andrew Lunn <andrew at lunn.ch>
+Signed-off-by: Gregory CLEMENT <gregory.clement at bootlin.com>
+---
+ arch/arm/boot/dts/Makefile | 1 +
+ arch/arm/boot/dts/kirkwood-c200-v1.dts | 310 +++++++++++++++++++++++++
+ 2 files changed, 311 insertions(+)
+ create mode 100644 arch/arm/boot/dts/kirkwood-c200-v1.dts
+
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -267,6 +267,7 @@ dtb-$(CONFIG_ARCH_KEYSTONE) += \
+ dtb-$(CONFIG_MACH_KIRKWOOD) += \
+ kirkwood-b3.dtb \
+ kirkwood-blackarmor-nas220.dtb \
++ kirkwood-c200-v1.dtb \
+ kirkwood-cloudbox.dtb \
+ kirkwood-d2net.dtb \
+ kirkwood-db-88f6281.dtb \
+--- /dev/null
++++ b/arch/arm/boot/dts/kirkwood-c200-v1.dts
+@@ -0,0 +1,310 @@
++// SPDX-License-Identifier: GPL-2.0-or-later
++/*
++ * Ctera C200 V1 Board Description
++ * Copyright 2021-2022 Pawel Dembicki <paweldembicki at gmail.com>
++ */
++
++/dts-v1/;
++
++#include "kirkwood.dtsi"
++#include "kirkwood-6281.dtsi"
++#include <dt-bindings/leds/common.h>
++
++/ {
++ model = "Ctera C200 V1";
++ compatible = "ctera,c200-v1", "marvell,kirkwood-88f6281", "marvell,kirkwood";
++
++ chosen {
++ bootargs = "console=ttyS0,115200";
++ stdout-path = &uart0;
++ };
++
++ memory at 0 {
++ device_type = "memory";
++ reg = <0x00000000 0x20000000>;
++ };
++
++ keys {
++ compatible = "gpio-keys";
++ pinctrl-0 = <&pmx_buttons>;
++ pinctrl-names = "default";
++
++ power {
++ label = "Power Button";
++ linux,code = <KEY_POWER>;
++ gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
++ };
++
++ reset {
++ label = "Reset Button";
++ linux,code = <KEY_RESTART>;
++ gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
++ };
++
++ usb1 {
++ label = "USB1 Button";
++ linux,code = <BTN_0>;
++ gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
++ };
++
++ usb2 {
++ label = "USB2 Button";
++ linux,code = <BTN_1>;
++ gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
++ };
++ };
++
++ gpio-poweroff {
++ compatible = "gpio-poweroff";
++ pinctrl-0 = <&pmx_poweroff>;
++ pinctrl-names = "default";
++ gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
++ };
++
++ leds {
++ compatible = "gpio-leds";
++ pinctrl-0 = <&pmx_leds>;
++ pinctrl-names = "default";
++
++ led-0 {
++ function = LED_FUNCTION_DISK;
++ function-enumerator = <2>;
++ color = <LED_COLOR_ID_RED>;
++ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
++ };
++
++ led-1 {
++ function = LED_FUNCTION_DISK;
++ function-enumerator = <1>;
++ color = <LED_COLOR_ID_GREEN>;
++ gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
++ };
++
++ led-2 {
++ function = LED_FUNCTION_DISK;
++ function-enumerator = <2>;
++ color = <LED_COLOR_ID_GREEN>;
++ gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
++ };
++
++ led-3 {
++ function = LED_FUNCTION_DISK;
++ function-enumerator = <1>;
++ color = <LED_COLOR_ID_RED>;
++ gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
++ };
++
++ led-4 {
++ function = LED_FUNCTION_STATUS;
++ color = <LED_COLOR_ID_RED>;
++ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
++ };
++
++ led-5 {
++ function = LED_FUNCTION_STATUS;
++ color = <LED_COLOR_ID_GREEN>;
++ gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
++ };
++
++ led-6 {
++ function = LED_FUNCTION_INDICATOR;
++ color = <LED_COLOR_ID_BLUE>;
++ gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
++ };
++
++ led-7 {
++ function = LED_FUNCTION_DISK_ERR;
++ color = <LED_COLOR_ID_RED>;
++ gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
++ };
++
++ led-8 {
++ function = LED_FUNCTION_DISK_ERR;
++ color = <LED_COLOR_ID_GREEN>;
++ gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
++ };
++
++ led-9 {
++ function = LED_FUNCTION_USB;
++ function-enumerator = <1>;
++ color = <LED_COLOR_ID_RED>;
++ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
++ };
++
++ led-10 {
++ function = LED_FUNCTION_USB;
++ function-enumerator = <1>;
++ color = <LED_COLOR_ID_GREEN>;
++ gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
++ linux,default-trigger = "usbport";
++ trigger-sources = <&hub_port2>;
++ };
++
++ led-11 {
++ function = LED_FUNCTION_USB;
++ function-enumerator = <2>;
++ color = <LED_COLOR_ID_RED>;
++ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
++ };
++
++ led-12 {
++ function = LED_FUNCTION_USB;
++ function-enumerator = <2>;
++ color = <LED_COLOR_ID_GREEN>;
++ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
++ linux,default-trigger = "usbport";
++ trigger-sources = <&hub_port1>;
++ };
++ };
++};
++
++ð0 {
++ status = "okay";
++};
++
++ð0port {
++ phy-handle = <ðphy9>;
++};
++
++&i2c0 {
++ status = "okay";
++
++ rtc at 30 {
++ compatible = "s35390a";
++ reg = <0x30>;
++ };
++
++ lm63 at 4c {
++ compatible = "national,lm63";
++ reg = <0x4c>;
++ };
++};
++
++&mdio {
++ status = "okay";
++
++ ethphy9: ethernet-phy at 9 {
++ reg = <9>;
++ };
++};
++
++&nand {
++ status = "okay";
++ chip-delay = <40>;
++
++ partition at 0 {
++ label = "uboot";
++ reg = <0x0000000 0x200000>;
++ };
++
++ partition at 200000 {
++ label = "certificate";
++ reg = <0x0200000 0x100000>;
++ };
++
++ partition at 300000 {
++ label = "preset_cfg";
++ reg = <0x0300000 0x100000>;
++ };
++
++ partition at 400000 {
++ label = "dev_params";
++ reg = <0x0400000 0x100000>;
++ };
++
++ partition at 500000 {
++ label = "active_bank";
++ reg = <0x0500000 0x0100000>;
++ };
++
++ partition at 600000 {
++ label = "magic";
++ reg = <0x0600000 0x0100000>;
++ };
++
++ partition at 700000 {
++ label = "bank1";
++ reg = <0x0700000 0x2800000>;
++ };
++
++ partition at 2f00000 {
++ label = "bank2";
++ reg = <0x2f00000 0x2800000>;
++ };
++
++ /* 0x5700000-0x5a00000 undefined in vendor firmware */
++
++ partition at 5a00000 {
++ label = "reserved";
++ reg = <0x5a00000 0x2000000>;
++ };
++
++ partition at 7a00000 {
++ label = "rootfs";
++ reg = <0x7a00000 0x8600000>;
++ };
++};
++
++&pinctrl {
++ /* Buzzer gpios are connected to two pins of buzzer.
++ * This buzzer require a modulated signal from gpio.
++ * Leave it as is due lack of proper driver.
++ */
++ pmx_buzzer: pmx-buzzer {
++ marvell,pins = "mpp12", "mpp13";
++ marvell,function = "gpio";
++ };
++
++ pmx_leds: pmx-leds {
++ marvell,pins = "mpp14", "mpp15", "mpp16", "mpp17", "mpp38",
++ "mpp39", "mpp40", "mpp42", "mpp43", "mpp44",
++ "mpp45", "mpp46", "mpp47";
++ marvell,function = "gpio";
++ };
++
++ pmx_buttons: pmx-buttons {
++ marvell,pins = "mpp28", "mpp29", "mpp48", "mpp49";
++ marvell,function = "gpio";
++ };
++
++ pmx_poweroff: pmx-poweroff {
++ marvell,pins = "mpp34";
++ marvell,function = "gpio";
++ };
++};
++
++&rtc {
++ status = "disabled";
++};
++
++&sata {
++ status = "okay";
++ nr-ports = <2>;
++};
++
++&uart0 {
++ status = "okay";
++};
++
++&usb0 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ status = "okay";
++
++ port at 1 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <1>;
++ #trigger-source-cells = <0>;
++
++ hub_port1: port at 1 {
++ reg = <1>;
++ #trigger-source-cells = <0>;
++ };
++
++ hub_port2: port at 2 {
++ reg = <2>;
++ #trigger-source-cells = <0>;
++ };
++ };
++};
diff --git a/target/linux/kirkwood/patches-5.15/002-6.2-ARM-dts-kirkwood-Add-Zyxel-NSA310S-board.patch b/target/linux/kirkwood/patches-5.15/002-6.2-ARM-dts-kirkwood-Add-Zyxel-NSA310S-board.patch
new file mode 100644
index 0000000000..b745ea104f
--- /dev/null
+++ b/target/linux/kirkwood/patches-5.15/002-6.2-ARM-dts-kirkwood-Add-Zyxel-NSA310S-board.patch
@@ -0,0 +1,301 @@
+From e977a103840c57d72b52cbc8c17f87f86ef9aa8d Mon Sep 17 00:00:00 2001
+From: Pawel Dembicki <paweldembicki at gmail.com>
+Date: Sat, 29 Oct 2022 22:57:38 +0200
+Subject: [PATCH] ARM: dts: kirkwood: Add Zyxel NSA310S board
+
+Zyxel NSA310S is a NAS based on Marvell kirkwood SoC.
+
+Specification:
+ - Processor Marvell 88F6702 1 GHz
+ - 256MB RAM
+ - 128MB NAND
+ - 1x GBE LAN port (PHY: Marvell 88E1318)
+ - 2x USB 2.0
+ - 1x SATA
+ - 3x button
+ - 7x leds
+ - serial on J1 connector (115200 8N1) (GND-NOPIN-RX-TX-VCC)
+
+Tested-by: Tony Dinh <mibodhi at gmail.com>
+Signed-off-by: Pawel Dembicki <paweldembicki at gmail.com>
+Acked-by: Adam Baker <linux at baker-net.org.uk>
+Reviewed-by: Andrew Lunn <andrew at lunn.ch>
+Signed-off-by: Gregory CLEMENT <gregory.clement at bootlin.com>
+---
+ arch/arm/boot/dts/Makefile | 1 +
+ arch/arm/boot/dts/kirkwood-nsa310s.dts | 259 +++++++++++++++++++++++++
+ 2 files changed, 260 insertions(+)
+ create mode 100644 arch/arm/boot/dts/kirkwood-nsa310s.dts
+
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -320,6 +320,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
+ kirkwood-ns2mini.dtb \
+ kirkwood-nsa310.dtb \
+ kirkwood-nsa310a.dtb \
++ kirkwood-nsa310s.dtb \
+ kirkwood-nsa320.dtb \
+ kirkwood-nsa325.dtb \
+ kirkwood-openblocks_a6.dtb \
+--- /dev/null
++++ b/arch/arm/boot/dts/kirkwood-nsa310s.dts
+@@ -0,0 +1,259 @@
++// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
++/*
++ * ZyXEL NSA310S Board Description
++ * Copyright 2020-2022 Pawel Dembicki <paweldembicki at gmail.com>
++ * Copyright (c) 2015-2021, Tony Dinh <mibodhi at gmail.com>
++ * Copyright (c) 2014, Adam Baker <linux at baker-net.org.uk>
++ * Based upon the board setup file created by Peter Schildmann
++ */
++/dts-v1/;
++
++#include "kirkwood.dtsi"
++#include "kirkwood-6281.dtsi"
++#include <dt-bindings/leds/common.h>
++
++/ {
++ model = "ZyXEL NSA310S";
++ compatible = "zyxel,nsa310s", "marvell,kirkwood-88f6702", "marvell,kirkwood";
++
++ memory {
++ device_type = "memory";
++ reg = <0x00000000 0x10000000>;
++ };
++
++ chosen {
++ bootargs = "console=ttyS0,115200n8 earlyprintk";
++ stdout-path = &uart0;
++ };
++
++ gpio_poweroff {
++ compatible = "gpio-poweroff";
++ pinctrl-0 = <&pmx_pwr_off>;
++ pinctrl-names = "default";
++ gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
++ };
++
++ keys {
++ compatible = "gpio-keys";
++ #address-cells = <1>;
++ #size-cells = <0>;
++ pinctrl-0 = <&pmx_buttons>;
++ pinctrl-names = "default";
++
++ power {
++ label = "Power Button";
++ linux,code = <KEY_POWER>;
++ gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
++ };
++
++ copy {
++ label = "Copy Button";
++ linux,code = <KEY_COPY>;
++ gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
++ };
++
++ reset {
++ label = "Reset Button";
++ linux,code = <KEY_RESTART>;
++ gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
++ };
++ };
++
++ leds {
++ compatible = "gpio-leds";
++ pinctrl-0 = <&pmx_leds>;
++ pinctrl-names = "default";
++
++ led-1 {
++ function = LED_FUNCTION_DISK_ERR;
++ color = <LED_COLOR_ID_RED>;
++ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
++ };
++
++ led-2 {
++ function = LED_FUNCTION_USB;
++ color = <LED_COLOR_ID_GREEN>;
++ gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
++ linux,default-trigger = "usb-host";
++ };
++
++ led-3 {
++ function = LED_FUNCTION_DISK;
++ color = <LED_COLOR_ID_GREEN>;
++ gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
++ linux,default-trigger = "ata1";
++ };
++
++ led-4 {
++ function = LED_FUNCTION_INDICATOR;
++ color = <LED_COLOR_ID_GREEN>;
++ gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
++ };
++
++ led-5 {
++ function = LED_FUNCTION_INDICATOR;
++ color = <LED_COLOR_ID_RED>;
++ gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
++ };
++
++ led-6 {
++ function = LED_FUNCTION_STATUS;
++ color = <LED_COLOR_ID_GREEN>;
++ gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
++ linux,default-trigger = "default-on";
++ };
++
++ led-7 {
++ function = LED_FUNCTION_STATUS;
++ color = <LED_COLOR_ID_RED>;
++ gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
++ };
++ };
++
++ usb0_power: regulator at 1 {
++ compatible = "regulator-fixed";
++ regulator-name = "USB Power";
++
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5000000>;
++ regulator-always-on;
++ regulator-boot-on;
++ gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>;
++ };
++
++ sata1_power: regulator at 2 {
++ compatible = "regulator-fixed";
++ regulator-name = "SATA1 Power";
++
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5000000>;
++ regulator-always-on;
++ regulator-boot-on;
++ gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>;
++ };
++
++ thermal-zones {
++ disk-thermal {
++ polling-delay = <20000>;
++ polling-delay-passive = <2000>;
++
++ thermal-sensors = <&hdd_temp>;
++
++ trips {
++ disk_alert: disk-alert {
++ temperature = <40000>;
++ hysteresis = <5000>;
++ type = "active";
++ };
++ disk_crit: disk-crit {
++ temperature = <60000>;
++ hysteresis = <2000>;
++ type = "critical";
++ };
++ };
++ };
++ };
++};
++
++
++ð0 {
++ status = "okay";
++
++ ethernet0-port at 0 {
++ phy-handle = <ðphy0>;
++ };
++};
++
++&i2c0 {
++ status = "okay";
++
++ rtc at 68 {
++ compatible = "htk,ht1382";
++ reg = <0x68>;
++ };
++};
++
++&mdio {
++ status = "okay";
++
++ ethphy0: ethernet-phy at 1 {
++ reg = <1>;
++ phy-mode = "rgmii-id";
++ marvell,reg-init = <0x1 0x16 0x0 0x3>,
++ <0x1 0x10 0x0 0x1017>,
++ <0x1 0x11 0x0 0x4408>,
++ <0x1 0x16 0x0 0x0>;
++ };
++};
++
++&nand {
++ status = "okay";
++ chip-delay = <35>;
++
++ partition at 0 {
++ label = "uboot";
++ reg = <0x0000000 0x00c0000>;
++ read-only;
++ };
++ partition at c0000 {
++ label = "uboot_env";
++ reg = <0x00c0000 0x0080000>;
++ };
++ partition at 140000 {
++ label = "ubi";
++ reg = <0x0140000 0x7ec0000>;
++ };
++};
++
++&pciec {
++ status = "okay";
++};
++
++&pcie0 {
++ status = "okay";
++};
++
++&pinctrl {
++ pinctrl-names = "default";
++
++ pmx_buttons: pmx-buttons {
++ marvell,pins = "mpp24", "mpp25", "mpp26";
++ marvell,function = "gpio";
++ };
++
++ pmx_leds: pmx-leds {
++ marvell,pins = "mpp13", "mpp15", "mpp16", "mpp22", "mpp23",
++ "mpp28", "mpp29";
++ marvell,function = "gpio";
++ };
++
++ pmx_power: pmx-power {
++ marvell,pins = "mpp21", "mpp33";
++ marvell,function = "gpio";
++ };
++
++ pmx_pwr_off: pmx-pwr-off {
++ marvell,pins = "mpp27";
++ marvell,function = "gpio";
++ };
++};
++
++&rtc {
++ status = "disabled";
++};
++
++&sata {
++ status = "okay";
++ nr-ports = <1>;
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ hdd_temp: sata-port at 0 {
++ reg = <0>;
++ #thermal-sensor-cells = <0>;
++ };
++};
++
++&uart0 {
++ status = "okay";
++};
diff --git a/target/linux/kirkwood/patches-5.15/003-6.5-ARM-dts-kirkwood-Add-Endian-4i-Edge-200-board.patch b/target/linux/kirkwood/patches-5.15/003-6.5-ARM-dts-kirkwood-Add-Endian-4i-Edge-200-board.patch
new file mode 100644
index 0000000000..4b0f46bb6d
--- /dev/null
+++ b/target/linux/kirkwood/patches-5.15/003-6.5-ARM-dts-kirkwood-Add-Endian-4i-Edge-200-board.patch
@@ -0,0 +1,249 @@
+From 5668d088ee4ea05db9daaae0645d1d1f579b20f9 Mon Sep 17 00:00:00 2001
+From: Pawel Dembicki <paweldembicki at gmail.com>
+Date: Mon, 3 Oct 2022 09:34:43 +0200
+Subject: ARM: dts: kirkwood: Add Endian 4i Edge 200 board
+
+Add Endian 4i Edge 200 is 5-port firewall.
+It have also clone: Endian UTM Mini (The same hardware, with added WLAN
+card).
+
+Hardware:
+ - SoC: Marvell 88F6281-A1 ARMv5TE Processor 1.2GHz
+ - Ram: 512MB (4x Nanya NT5TU128M8GE-AC)
+ - NAND Flash: 512MB (Micron 29F4G08AAC)
+ - Lan 1-4: 4x GBE (Marvell 88E6171R-TFJ2)
+ - Lan 5: 1x GBE (Marvell 88E1116R-NNC1)
+ - Storage: MicroSD Slot
+ - MCPIE: MiniPCIe Slot present [fitted with SparkLan WPEA-110N/E
+ (Atheros AR9280 chipset) in Endian UTM Mini WLAN only]
+ - USB: 1x USB 2.0 port
+ - Console: RJ-45 port
+ - LEDs: 3x GPIO controlled
+
+Signed-off-by: Pawel Dembicki <paweldembicki at gmail.com>
+Reviewed-by: Andrew Lunn <andrew at lunn.ch>
+Signed-off-by: Gregory CLEMENT <gregory.clement at bootlin.com>
+---
+ arch/arm/boot/dts/Makefile | 1 +
+ arch/arm/boot/dts/kirkwood-4i-edge-200.dts | 205 +++++++++++++++++++++++++++++
+ 2 files changed, 206 insertions(+)
+ create mode 100644 arch/arm/boot/dts/kirkwood-4i-edge-200.dts
+
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -265,6 +265,7 @@ dtb-$(CONFIG_ARCH_KEYSTONE) += \
+ keystone-k2g-evm.dtb \
+ keystone-k2g-ice.dtb
+ dtb-$(CONFIG_MACH_KIRKWOOD) += \
++ kirkwood-4i-edge-200.dtb \
+ kirkwood-b3.dtb \
+ kirkwood-blackarmor-nas220.dtb \
+ kirkwood-c200-v1.dtb \
+--- /dev/null
++++ b/arch/arm/boot/dts/kirkwood-4i-edge-200.dts
+@@ -0,0 +1,205 @@
++// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
++/*
++ * Endian 4i Edge 200 Board Description
++ * Note: Endian UTM Mini is hardware clone of Endian Edge 200
++ * Copyright 2021-2022 Pawel Dembicki <paweldembicki at gmail.com>
++ */
++
++/dts-v1/;
++
++#include "kirkwood.dtsi"
++#include "kirkwood-6281.dtsi"
++#include <dt-bindings/leds/common.h>
++
++/ {
++ model = "Endian 4i Edge 200";
++ compatible = "endian,4i-edge-200", "marvell,kirkwood-88f6281", "marvell,kirkwood";
++
++ memory {
++ device_type = "memory";
++ reg = <0x00000000 0x20000000>;
++ };
++
++ chosen {
++ bootargs = "console=ttyS0,115200n8";
++ stdout-path = &uart0;
++ };
++
++ leds {
++ compatible = "gpio-leds";
++ pinctrl-0 = <&pmx_led>;
++ pinctrl-names = "default";
++
++ led-1 {
++ function = LED_FUNCTION_SD;
++ color = <LED_COLOR_ID_AMBER>;
++ gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
++ linux,default-trigger = "mmc0";
++ };
++
++ led-2 {
++ function = LED_FUNCTION_STATUS;
++ color = <LED_COLOR_ID_AMBER>;
++ gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
++ };
++
++ led-3 {
++ function = LED_FUNCTION_STATUS;
++ color = <LED_COLOR_ID_GREEN>;
++ gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
++ };
++ };
++};
++
++ð0 {
++ status = "okay";
++};
++
++ð0port {
++ speed = <1000>;
++ duplex = <1>;
++};
++
++ð1 {
++ status = "okay";
++};
++
++ð1port {
++ phy-handle = <ðphyb>;
++};
++
++&mdio {
++ status = "okay";
++
++ ethphyb: ethernet-phy at b {
++ reg = <0x0b>;
++
++ marvell,reg-init =
++ /* link-activity, bi-color mode 4 */
++ <3 0x10 0xfff0 0xf>; /* Reg 3,16 <- 0xzzzf */
++ };
++
++ switch0: switch at 11 {
++ compatible = "marvell,mv88e6085";
++ reg = <0x11>;
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port at 0 {
++ reg = <0>;
++ label = "port1";
++ };
++
++ port at 1 {
++ reg = <1>;
++ label = "port2";
++ };
++
++ port at 2 {
++ reg = <2>;
++ label = "port3";
++ };
++
++ port at 3 {
++ reg = <3>;
++ label = "port4";
++ };
++
++ port at 5 {
++ reg = <5>;
++ phy-mode = "rgmii-id";
++ ethernet = <ð0port>;
++
++ fixed-link {
++ speed = <1000>;
++ full-duplex;
++ };
++ };
++ };
++ };
++};
++
++&nand {
++ status = "okay";
++ pinctrl-0 = <&pmx_nand>;
++ pinctrl-names = "default";
++
++ partition at 0 {
++ label = "u-boot";
++ reg = <0x00000000 0x000a0000>;
++ read-only;
++ };
++
++ partition at a0000 {
++ label = "u-boot-env";
++ reg = <0x000a0000 0x00060000>;
++ read-only;
++ };
++
++ partition at 100000 {
++ label = "kernel";
++ reg = <0x00100000 0x00400000>;
++ };
++
++ partition at 500000 {
++ label = "ubi";
++ reg = <0x00500000 0x1fb00000>;
++ };
++};
++
++&pciec {
++ status = "okay";
++};
++
++&pcie0 {
++ status = "okay";
++};
++
++&pinctrl {
++ pinctrl-0 = <&pmx_sysrst>;
++ pinctrl-names = "default";
++
++ pmx_sysrst: pmx-sysrst {
++ marvell,pins = "mpp6";
++ marvell,function = "sysrst";
++ };
++
++ pmx_sdio_cd: pmx-sdio-cd {
++ marvell,pins = "mpp28";
++ marvell,function = "gpio";
++ };
++
++ pmx_led: pmx-led {
++ marvell,pins = "mpp34", "mpp35", "mpp49";
++ marvell,function = "gpio";
++ };
++};
++
++&rtc {
++ status = "okay";
++};
++
++&sata_phy0 {
++ status = "disabled";
++};
++
++&sata_phy1 {
++ status = "disabled";
++};
++
++&sdio {
++ pinctrl-0 = <&pmx_sdio_cd>;
++ pinctrl-names = "default";
++ status = "okay";
++ cd-gpios = <&gpio0 28 9>;
++};
++
++&uart0 {
++ status = "okay";
++};
++
++&usb0 {
++ status = "okay";
++};
diff --git a/target/linux/kirkwood/patches-5.15/114-ctera-c-200-v1.patch b/target/linux/kirkwood/patches-5.15/114-ctera-c-200-v1.patch
new file mode 100644
index 0000000000..23922b8d88
--- /dev/null
+++ b/target/linux/kirkwood/patches-5.15/114-ctera-c-200-v1.patch
@@ -0,0 +1,51 @@
+--- a/arch/arm/boot/dts/kirkwood-c200-v1.dts
++++ b/arch/arm/boot/dts/kirkwood-c200-v1.dts
+@@ -14,6 +14,14 @@
+ model = "Ctera C200 V1";
+ compatible = "ctera,c200-v1", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
++
++ aliases {
++ led-boot = &led_status_green;
++ led-failsafe = &led_status_red;
++ led-running = &led_status_green;
++ led-upgrade = &led_status_red;
++ };
++
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ stdout-path = &uart0;
+@@ -78,6 +86,7 @@
+ function-enumerator = <1>;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
++ linux,default-trigger = "ata1";
+ };
+
+ led-2 {
+@@ -85,6 +94,7 @@
+ function-enumerator = <2>;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
++ linux,default-trigger = "ata2";
+ };
+
+ led-3 {
+@@ -94,13 +104,15 @@
+ gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
+ };
+
+- led-4 {
++ led_status_red: led-4 {
++ label = "red:status";
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_RED>;
+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+ };
+
+- led-5 {
++ led_status_green: led-5 {
++ label = "green:status";
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
diff --git a/target/linux/kirkwood/patches-5.15/115-nsa310s.patch b/target/linux/kirkwood/patches-5.15/115-nsa310s.patch
new file mode 100644
index 0000000000..4c6e08f49c
--- /dev/null
+++ b/target/linux/kirkwood/patches-5.15/115-nsa310s.patch
@@ -0,0 +1,35 @@
+--- a/arch/arm/boot/dts/kirkwood-nsa310s.dts
++++ b/arch/arm/boot/dts/kirkwood-nsa310s.dts
+@@ -16,6 +16,13 @@
+ model = "ZyXEL NSA310S";
+ compatible = "zyxel,nsa310s", "marvell,kirkwood-88f6702", "marvell,kirkwood";
+
++ aliases {
++ led-boot = &led_green_sys;
++ led-failsafe = &led_red_sys;
++ led-running = &led_green_sys;
++ led-upgrade = &led_red_sys;
++ };
++
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x10000000>;
+@@ -96,14 +103,16 @@
+ gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
+ };
+
+- led-6 {
++ led_green_sys: led-6 {
++ label = "nsa310s:green:sys";
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-on";
+ };
+
+- led-7 {
++ led_red_sys: led-7 {
++ label = "nsa310s:red:sys";
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_RED>;
+ gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
diff --git a/target/linux/kirkwood/patches-5.15/116-4i-edge-200.patch b/target/linux/kirkwood/patches-5.15/116-4i-edge-200.patch
new file mode 100644
index 0000000000..ffc46c29dc
--- /dev/null
+++ b/target/linux/kirkwood/patches-5.15/116-4i-edge-200.patch
@@ -0,0 +1,34 @@
+--- a/arch/arm/boot/dts/kirkwood-4i-edge-200.dts
++++ b/arch/arm/boot/dts/kirkwood-4i-edge-200.dts
+@@ -20,6 +20,13 @@
+ reg = <0x00000000 0x20000000>;
+ };
+
++ aliases {
++ led-boot = &led_status_green;
++ led-failsafe = &led_status_orange;
++ led-running = &led_status_green;
++ led-upgrade = &led_status_orange;
++ };
++
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ stdout-path = &uart0;
+@@ -37,13 +44,15 @@
+ linux,default-trigger = "mmc0";
+ };
+
+- led-2 {
++ led_status_orange: led-2 {
++ label = "orange:status";
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_AMBER>;
+ gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+ };
+
+- led-3 {
++ led_status_green: led-3 {
++ label = "green:status";
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
More information about the lede-commits
mailing list