[openwrt/openwrt] layerscape: Add ls1028ardb support

[LEDE Commits]

hauke pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/924a5aabc708d2ab84ae9c05a580db75b188534f

commit 924a5aabc708d2ab84ae9c05a580db75b188534f
Author: Wojciech Dubowik <Wojciech.Dubowik at protonmail.ch>
AuthorDate: Tue Jul 19 13:35:12 2022 +0200

    layerscape: Add ls1028ardb support
    
    Add support for NXP LS1028ARDB reference board. It's a dual core
    Coretex-A53 board with 4G RAM and 5 Eternet ports (4 ports are
    connected to MSCC Felix switch).
    
    The original layout of NXP board has been kept but firmware
    images are adapted to be more sysupgrade friendly. At the moment
    NOR and SD boots are supported.
    
    NOR flash instructions:
    * make sd card with sdboot image
    * boot
    * write firmware image to spi flash
    $ mtd write /tmp/openwrt-layerscape-armv8_64b-fsl_ls1028a-rdb-
    squashfs-firmware.bin /dev/mtd0
    * change jumper to NOR boot and reset
    
    V3:
     * Added board specific network defaults for lan/wan
    
    v2:
     * Added INA220 curent monitor, PCF2129 RTC clock and NXP
       SA56004ED temperature sensor to default packages
     * removed compat fixups for thist board
    
    Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik at protonmail.ch>
---
 target/linux/layerscape/README                     | 10 +++++
 .../layerscape/base-files/etc/board.d/02_network   |  4 ++
 .../base-files/lib/preinit/79_move_config          |  1 +
 .../layerscape/base-files/lib/upgrade/platform.sh  |  5 +++
 target/linux/layerscape/image/armv8_64b.mk         | 47 ++++++++++++++++++++++
 5 files changed, 67 insertions(+)

diff --git a/target/linux/layerscape/README b/target/linux/layerscape/README
index a8d1846468..1e3f707b4f 100644
--- a/target/linux/layerscape/README
+++ b/target/linux/layerscape/README
@@ -12,6 +12,7 @@ users can bring up the board without difficulty.
   LS1012ARDB        (QSPI NOR boot)
   LS1012AFRDM       (QSPI NOR boot)
   LS1012AFRWY       (QSPI NOR boot)
+  LS1028ARDB        (QSPI NOR boot    | SD card boot)
   LS1043ARDB        (NOR boot         | SD card boot)
   LS1046ARDB        (QSPI NOR boot    | SD card boot)
   LS1046AFRWY       (QSPI NOR boot    | SD card boot)
@@ -95,6 +96,15 @@ from SD card. (sdcard.img images are gz-iped to save space. Please extract them
   => sf write a0000000 0 $filesize
   => reset
 
+* LS1028ARDB
+  Board has only one bank. Those commands will replace stock bootloader
+  and firmware.
+  => tftp a0000000 <firmware_name>-firmware.bin
+  => sf probe 0:0
+  => sf erase 0 +$filesize
+  => sf write a0000000 0 $filesize
+  => reset
+
 * LS1043ARDB
   Start up from bank0, and program firmware to bank4 with below commands.
   Switch to bank4 to start up OpenWrt.
diff --git a/target/linux/layerscape/base-files/etc/board.d/02_network b/target/linux/layerscape/base-files/etc/board.d/02_network
index b46f0b0621..172172c12c 100644
--- a/target/linux/layerscape/base-files/etc/board.d/02_network
+++ b/target/linux/layerscape/base-files/etc/board.d/02_network
@@ -5,6 +5,10 @@
 board_config_update
 
 case "$(board_name)" in
+	fsl,ls1028a-rdb|\
+	fsl,ls1028a-rdb-sdboot)
+		ucidef_set_interfaces_lan_wan "swp0 swp1 swp2 swp3" "eth0"
+		;;
 	traverse,ls1043v)
 		ucidef_set_interface_lan "eth0 eth1 eth2 eth3"
 		ucidef_set_interface_wan "eth4"
diff --git a/target/linux/layerscape/base-files/lib/preinit/79_move_config b/target/linux/layerscape/base-files/lib/preinit/79_move_config
index 901a289b66..5519e059d9 100644
--- a/target/linux/layerscape/base-files/lib/preinit/79_move_config
+++ b/target/linux/layerscape/base-files/lib/preinit/79_move_config
@@ -10,6 +10,7 @@ move_config() {
 	fsl,ls1012a-frwy-sdboot | \
 	fsl,ls1021a-iot-sdboot | \
 	fsl,ls1021a-twr-sdboot | \
+	fsl,ls1028a-rdb-sdboot | \
 	fsl,ls1043a-rdb-sdboot | \
 	fsl,ls1046a-frwy-sdboot | \
 	fsl,ls1046a-rdb-sdboot | \
diff --git a/target/linux/layerscape/base-files/lib/upgrade/platform.sh b/target/linux/layerscape/base-files/lib/upgrade/platform.sh
index 857be5a744..e88dfdf145 100644
--- a/target/linux/layerscape/base-files/lib/upgrade/platform.sh
+++ b/target/linux/layerscape/base-files/lib/upgrade/platform.sh
@@ -71,6 +71,7 @@ platform_copy_config() {
 	fsl,ls1012a-frwy-sdboot | \
 	fsl,ls1021a-iot-sdboot | \
 	fsl,ls1021a-twr-sdboot | \
+	fsl,ls1028a-rdb-sdboot | \
 	fsl,ls1043a-rdb-sdboot | \
 	fsl,ls1046a-frwy-sdboot | \
 	fsl,ls1046a-rdb-sdboot | \
@@ -95,6 +96,8 @@ platform_check_image() {
 	fsl,ls1021a-iot-sdboot | \
 	fsl,ls1021a-twr | \
 	fsl,ls1021a-twr-sdboot | \
+	fsl,ls1028a-rdb | \
+	fsl,ls1028a-rdb-sdboot | \
 	fsl,ls1043a-rdb | \
 	fsl,ls1043a-rdb-sdboot | \
 	fsl,ls1046a-frwy | \
@@ -130,6 +133,7 @@ platform_do_upgrade() {
 	fsl,ls1012a-frdm | \
 	fsl,ls1012a-rdb | \
 	fsl,ls1021a-twr | \
+	fsl,ls1028a-rdb | \
 	fsl,ls1043a-rdb | \
 	fsl,ls1046a-frwy | \
 	fsl,ls1046a-rdb | \
@@ -142,6 +146,7 @@ platform_do_upgrade() {
 	fsl,ls1012a-frwy-sdboot | \
 	fsl,ls1021a-iot-sdboot | \
 	fsl,ls1021a-twr-sdboot | \
+	fsl,ls1028a-rdb-sdboot | \
 	fsl,ls1043a-rdb-sdboot | \
 	fsl,ls1046a-frwy-sdboot | \
 	fsl,ls1046a-rdb-sdboot | \
diff --git a/target/linux/layerscape/image/armv8_64b.mk b/target/linux/layerscape/image/armv8_64b.mk
index 4a69f1c19e..f5a6a055fb 100644
--- a/target/linux/layerscape/image/armv8_64b.mk
+++ b/target/linux/layerscape/image/armv8_64b.mk
@@ -98,6 +98,53 @@ define Device/fsl_ls1012a-frwy-sdboot
 endef
 TARGET_DEVICES += fsl_ls1012a-frwy-sdboot
 
+define Device/fsl_ls1028a-rdb
+  DEVICE_VENDOR := NXP
+  DEVICE_MODEL := LS1028A-RDB
+  DEVICE_VARIANT := Default
+  DEVICE_DTS := freescale/fsl-ls1028a-rdb
+  KERNEL = kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
+  DEVICE_PACKAGES += \
+    trusted-firmware-a-ls1028a-rdb \
+    kmod-hwmon-ina2xx \
+    kmod-hwmon-lm90 \
+    kmod-rtc-pcf2127
+  IMAGE/firmware.bin := \
+    ls-clean | \
+    ls-append $(1)-bl2.pbl | pad-to 1M | \
+    ls-append $(1)-fip.bin | pad-to 5M | \
+    ls-append $(1)-uboot-env.bin | pad-to 16M | \
+    append-kernel | \
+    append-rootfs | pad-rootfs | check-size
+  IMAGE/sysupgrade.bin := \
+    append-kernel | \
+    append-rootfs | pad-rootfs | \
+    check-size $(LS_SYSUPGRADE_IMAGE_SIZE) | append-metadata
+endef
+TARGET_DEVICES += fsl_ls1028a-rdb
+
+define Device/fsl_ls1028a-rdb-sdboot
+  $(Device/fsl-sdboot)
+  DEVICE_VENDOR := NXP
+  DEVICE_MODEL := LS1028A-RDB
+  DEVICE_VARIANT := SD Card Boot
+  DEVICE_DTS := freescale/fsl-ls1028a-rdb
+  DEVICE_PACKAGES += \
+    trusted-firmware-a-ls1028a-rdb-sdboot \
+    kmod-hwmon-ina2xx \
+    kmod-hwmon-lm90 \
+    kmod-rtc-pcf2127
+  IMAGE/sdcard.img.gz := \
+    ls-clean | \
+    ls-append-sdhead $(1) | pad-to 4K | \
+    ls-append $(1)-bl2.pbl | pad-to 1M | \
+    ls-append $(1)-fip.bin | pad-to 5M | \
+    ls-append $(1)-uboot-env.bin | pad-to 16M | \
+    ls-append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
+    append-rootfs | pad-to $(LS_SD_IMAGE_SIZE)M | gzip
+endef
+TARGET_DEVICES += fsl_ls1028a-rdb-sdboot
+
 define Device/fsl_ls1043a-rdb
   $(Device/fix-sysupgrade)
   DEVICE_VENDOR := NXP