[openwrt/openwrt] filogic: add support for Netgear WAX220
LEDE Commits
lede-commits at lists.infradead.org
Tue Jun 27 14:15:38 PDT 2023
hauke pushed a commit to openwrt/openwrt.git, branch openwrt-23.05:
https://git.openwrt.org/cd17d8df2a38ccdd98aa1a7b361aa255d53ea5ac
commit cd17d8df2a38ccdd98aa1a7b361aa255d53ea5ac
Author: Flole Systems <flole at flole.de>
AuthorDate: Mon Apr 10 23:36:59 2023 +0200
filogic: add support for Netgear WAX220
Hardware
--------
SOC: MediaTek MT7986
RAM: 1024MB DDR3
FLASH: 128MB SPI-NAND (Winbond)
WIFI: Mediatek MT7986 DBDC 802.11ax 2.4/5 GHz
ETH: Realtek RTL8221B-VB-CG 2.5 N-Base-T PHY with PoE
UART: 3V3 115200 8N1 (Pinout silkscreened / Do not connect VCC)
Installation
------------
1. Download the OpenWrt initramfs image. Copy the image to a TFTP server
2. Connect the TFTP server to the WAX220. Conect to the serial console,
interrupt the autoboot process by pressing '0' when prompted.
3. Download & Boot the OpenWrt initramfs image.
$ setenv ipaddr 192.168.2.1
$ setenv serverip 192.168.2.2
$ tftpboot openwrt.bin
$ bootm
4. Wait for OpenWrt to boot. Transfer the sysupgrade image to the device
using scp and install using sysupgrade.
$ sysupgrade -n <path-to-sysupgrade.bin>
Signed-off-by: Flole Systems <flole at flole.de>
Signed-off-by: Stefan Agner <stefan at agner.ch>
(cherry picked from commit 984786a2f7ec622c99e8c9cdada65d0ea0cf4e0b)
---
package/boot/uboot-envtools/files/mediatek_filogic | 3 +
.../linux/mediatek/dts/mt7986b-netgear-wax220.dts | 288 +++++++++++++++++++++
.../filogic/base-files/etc/board.d/01_leds | 5 +
.../filogic/base-files/etc/board.d/02_network | 7 +
.../etc/hotplug.d/ieee80211/11_fix_wifi_mac | 5 +
target/linux/mediatek/image/filogic.mk | 16 ++
6 files changed, 324 insertions(+)
diff --git a/package/boot/uboot-envtools/files/mediatek_filogic b/package/boot/uboot-envtools/files/mediatek_filogic
index b638a65a4e..154944a8eb 100644
--- a/package/boot/uboot-envtools/files/mediatek_filogic
+++ b/package/boot/uboot-envtools/files/mediatek_filogic
@@ -37,6 +37,9 @@ bananapi,bpi-r3)
;;
esac
;;
+netgear,wax220)
+ ubootenv_add_uci_config "/dev/mtd5" "0x0" "0x20000" "0x20000"
+ ;;
xiaomi,redmi-router-ax6000-stock)
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x10000" "0x20000"
ubootenv_add_uci_sys_config "/dev/mtd2" "0x0" "0x10000" "0x20000"
diff --git a/target/linux/mediatek/dts/mt7986b-netgear-wax220.dts b/target/linux/mediatek/dts/mt7986b-netgear-wax220.dts
new file mode 100644
index 0000000000..f7da6e3630
--- /dev/null
+++ b/target/linux/mediatek/dts/mt7986b-netgear-wax220.dts
@@ -0,0 +1,288 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+#include "mt7986b.dtsi"
+
+/ {
+ #address-cells = <0x2>;
+ #size-cells = <0x2>;
+ model = "Netgear WAX220";
+ compatible = "netgear,wax220", "mediatek,mt7986b-spim-snand-rfb";
+
+ aliases {
+ serial0 = &uart0;
+ led-boot = &led_power_blue;
+ led-failsafe = &led_power_amber;
+ led-running = &led_power_green;
+ led-upgrade = &led_power_amber;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ reset {
+ gpios = <&pio 9 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ label = "reset";
+ };
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ wlan5g_green {
+ gpios = <&pio 12 GPIO_ACTIVE_LOW>;
+ label = "green:wlan5g";
+ };
+
+ led_power_amber: power_amber {
+ gpios = <&pio 15 GPIO_ACTIVE_LOW>;
+ label = "amber:power";
+ };
+
+ wlan2g_green {
+ gpios = <&pio 19 GPIO_ACTIVE_HIGH>;
+ label = "green:wlan2g";
+ };
+
+ led_power_blue: power_blue {
+ gpios = <&pio 7 GPIO_ACTIVE_HIGH>;
+ label = "blue:power";
+ };
+
+ led_power_green: power_green {
+ gpios = <&pio 10 GPIO_ACTIVE_LOW>;
+ label = "green:power";
+ };
+
+ wlan2g_blue {
+ gpios = <&pio 1 GPIO_ACTIVE_LOW>;
+ label = "blue:wlan2g";
+ };
+
+ lan_green {
+ gpios = <&pio 22 GPIO_ACTIVE_HIGH>;
+ label = "green:lan";
+ };
+
+ lan_amber {
+ gpios = <&pio 13 GPIO_ACTIVE_LOW>;
+ label = "amber:lan";
+ };
+
+ wlan5g_blue {
+ gpios = <&pio 2 GPIO_ACTIVE_LOW>;
+ label = "blue:wlan5g";
+ };
+ };
+};
+
+&crypto {
+ status = "okay";
+};
+
+ð {
+ status = "okay";
+
+ gmac1: mac at 1 {
+ compatible = "mediatek,eth-mac";
+ reg = <1>;
+ phy-handle = <&phy6>;
+ phy-mode = "2500base-x";
+ };
+
+ mdio: mdio-bus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+};
+
+&mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ phy6: ethernet-phy at 6 {
+ reg = <6>;
+ reset-assert-us = <100000>;
+ reset-deassert-us = <100000>;
+ reset-gpios = <&pio 6 GPIO_ACTIVE_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&pio>;
+ interrupts = <46 IRQ_TYPE_LEVEL_HIGH>;
+ };
+};
+
+
+&pio {
+ spi_flash_pins: spi-flash-pins-33-to-38 {
+ mux {
+ function = "spi";
+ groups = "spi0", "spi0_wp_hold";
+ };
+ conf-pu {
+ pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP";
+ drive-strength = <8>;
+ mediatek,pull-up-adv = <0>; /* bias-disable */
+ };
+ conf-pd {
+ pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO";
+ drive-strength = <8>;
+ mediatek,pull-down-adv = <0>; /* bias-disable */
+ };
+ };
+
+ wf_2g_5g_pins: wf_2g_5g-pins {
+ mux {
+ function = "wifi";
+ groups = "wf_2g", "wf_5g";
+ };
+ conf {
+ pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
+ "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
+ "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
+ "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
+ "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
+ "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
+ "WF1_TOP_CLK", "WF1_TOP_DATA";
+ drive-strength = <4>;
+ };
+ };
+
+ wf_dbdc_pins: wf-dbdc-pins {
+ mux {
+ function = "wifi";
+ groups = "wf_dbdc";
+ };
+ conf {
+ pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
+ "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
+ "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
+ "WF0_TOP_CLK", "WF0_TOP_DATA";
+ drive-strength = <4>;
+ };
+ };
+};
+
+&spi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi_flash_pins>;
+ status = "okay";
+
+ spi_nand_flash: flash at 0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spi-nand";
+ reg = <0>;
+
+ spi-max-frequency = <20000000>;
+ spi-tx-buswidth = <4>;
+ spi-rx-buswidth = <4>;
+
+ partitions: partitions {
+ #address-cells = <0x1>;
+ #size-cells = <0x1>;
+ compatible = "fixed-partitions";
+
+ partition at 5fc0000 {
+ label = "Traffic";
+ reg = <0x5fc0000 0x200000>;
+ };
+
+ partition at 63c0000 {
+ label = "NTGRcryptD";
+ reg = <0x63c0000 0x500000>;
+ };
+
+ partition at 580000 {
+ label = "ubi";
+ reg = <0x580000 0x5140000>;
+ };
+
+ factory: partition at 180000 {
+ label = "Factory";
+ reg = <0x180000 0x200000>;
+ };
+
+ partition at 69c0000 {
+ label = "User_data";
+ reg = <0x69c0000 0x640000>;
+ };
+
+ partition at 100000 {
+ label = "u-boot-env";
+ reg = <0x100000 0x80000>;
+ };
+
+ partition at 68c0000 {
+ label = "LOG";
+ reg = <0x68c0000 0x100000>;
+ };
+
+ partition at 5ac0000 {
+ label = "POT";
+ reg = <0x5ac0000 0x100000>;
+ };
+
+ partition at 0 {
+ label = "BL2";
+ read-only;
+ reg = <0x0 0x100000>;
+ };
+
+ partition at 5bc0000 {
+ label = "Language";
+ reg = <0x5bc0000 0x400000>;
+ };
+
+ partition at 61c0000 {
+ label = "Cert";
+ reg = <0x61c0000 0x100000>;
+ };
+
+ partition at 380000 {
+ label = "FIP";
+ reg = <0x380000 0x200000>;
+ };
+
+ partition at 56c0000 {
+ label = "RAE";
+ reg = <0x56c0000 0x400000>;
+ };
+
+ partition at 62c0000 {
+ label = "NTGRcryptK";
+ reg = <0x62c0000 0x100000>;
+ };
+ };
+ };
+
+};
+
+&trng {
+ status = "okay";
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&watchdog {
+ status = "okay";
+};
+
+&wifi {
+ status = "okay";
+ pinctrl-names = "default", "dbdc";
+ pinctrl-0 = <&wf_2g_5g_pins>;
+ pinctrl-1 = <&wf_dbdc_pins>;
+
+ mediatek,mtd-eeprom = <&factory 0x0>;
+};
diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds b/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds
index 1cb00ce26d..0ba825fd2b 100644
--- a/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds
+++ b/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds
@@ -9,6 +9,11 @@ case $board in
cudy,wr3000-v1)
ucidef_set_led_netdev "wan" "wan" "blue:wan" "wan"
;;
+netgear,wax220)
+ ucidef_set_led_netdev "eth0" "LAN" "green:lan" "eth0"
+ ucidef_set_led_netdev "wlan2g" "WLAN2G" "blue:wlan2g" "phy0-ap0"
+ ucidef_set_led_netdev "wlan5g" "WLAN5G" "blue:wlan5g" "phy1-ap0"
+ ;;
xiaomi,redmi-router-ax6000-stock|\
xiaomi,redmi-router-ax6000-ubootmod)
ucidef_set_led_netdev "wan" "wan" "rgb:network" "wan"
diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network
index a327a46108..8803326b27 100644
--- a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network
+++ b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network
@@ -11,6 +11,9 @@ mediatek_setup_interfaces()
asus,tuf-ax4200)
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" eth1
;;
+ netgear,wax220)
+ ucidef_set_interface_lan "eth0"
+ ;;
bananapi,bpi-r3)
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 sfp2" "eth1 wan"
;;
@@ -66,6 +69,10 @@ mediatek_setup_macs()
bananapi,bpi-r3)
wan_mac=$(macaddr_add $(cat /sys/class/net/eth0/address) 1)
;;
+ netgear,wax220)
+ lan_mac=$(mtd_get_mac_ascii u-boot-env mac)
+ label_mac=$lan_mac
+ ;;
qihoo,360t7)
lan_mac=$(mtd_get_mac_ascii factory lanMac)
wan_mac=$(macaddr_add "$lan_mac" 1)
diff --git a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac
index a3db00f5e8..3969a7bfe4 100644
--- a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac
+++ b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac
@@ -32,6 +32,11 @@ case "$board" in
[ "$PHYNBR" = "0" ] && echo "$addr" > /sys${DEVPATH}/macaddress
[ "$PHYNBR" = "1" ] && macaddr_setbit_la $(macaddr_add $addr 1) > /sys${DEVPATH}/macaddress
;;
+ netgear,wax220)
+ hw_mac_addr=$(mtd_get_mac_ascii u-boot-env mac)
+ [ "$PHYNBR" = "0" ] && macaddr_add $hw_mac_addr 2 > /sys${DEVPATH}/macaddress
+ [ "$PHYNBR" = "1" ] && macaddr_add $hw_mac_addr 3 > /sys${DEVPATH}/macaddress
+ ;;
qihoo,360t7)
addr=$(mtd_get_mac_ascii factory lanMac)
[ "$PHYNBR" = "0" ] && macaddr_add $addr 2 > /sys${DEVPATH}/macaddress
diff --git a/target/linux/mediatek/image/filogic.mk b/target/linux/mediatek/image/filogic.mk
index 6323a05de2..ae25aee2ed 100644
--- a/target/linux/mediatek/image/filogic.mk
+++ b/target/linux/mediatek/image/filogic.mk
@@ -176,6 +176,22 @@ define Device/glinet_gl-mt3000
endef
TARGET_DEVICES += glinet_gl-mt3000
+define Device/netgear_wax220
+ DEVICE_VENDOR := Netgear
+ DEVICE_MODEL := WAX220
+ DEVICE_DTS := mt7986b-netgear-wax220
+ DEVICE_DTS_DIR := ../dts
+ DEVICE_PACKAGES := kmod-mt7986-firmware mt7986-wo-firmware
+ IMAGES := sysupgrade.bin
+ KERNEL_IN_UBI := 1
+ KERNEL := kernel-bin | lzma | \
+ fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
+ KERNEL_INITRAMFS := kernel-bin | lzma | \
+ fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+endef
+TARGET_DEVICES += netgear_wax220
+
define Device/mediatek_mt7986a-rfb-nand
DEVICE_VENDOR := MediaTek
DEVICE_MODEL := MT7986 rfba AP (NAND)
More information about the lede-commits
mailing list