[openwrt/openwrt] armvirt: add options and driver modules for NXP Layerscape DPAA2 platform
LEDE Commits
lede-commits at lists.infradead.org
Tue Jun 13 07:50:11 PDT 2023
ynezz pushed a commit to openwrt/openwrt.git, branch openwrt-23.05:
https://git.openwrt.org/f1a02ba135c388b3ff2400463c10f4f82584106b
commit f1a02ba135c388b3ff2400463c10f4f82584106b
Author: Mathew McBride <matt at traverse.com.au>
AuthorDate: Fri Jun 10 05:57:03 2022 +0000
armvirt: add options and driver modules for NXP Layerscape DPAA2 platform
Tested with a Traverse Technologies Ten64 (LS1088A) board.
Signed-off-by: Mathew McBride <matt at traverse.com.au>
(23.05/5.15 version of commit 54bb95f879aaa62c4253d30390e77bc8180f4ed7)
---
target/linux/armvirt/64/config-5.15 | 50 ++++++++++++++++++-
target/linux/armvirt/config-5.15 | 13 ++++-
target/linux/armvirt/image/Makefile | 3 +-
target/linux/armvirt/modules.mk | 96 +++++++++++++++++++++++++++++++++++++
4 files changed, 157 insertions(+), 5 deletions(-)
diff --git a/target/linux/armvirt/64/config-5.15 b/target/linux/armvirt/64/config-5.15
index 66be848f8a..fc9128a064 100644
--- a/target/linux/armvirt/64/config-5.15
+++ b/target/linux/armvirt/64/config-5.15
@@ -1,4 +1,5 @@
CONFIG_64BIT=y
+CONFIG_ARCH_LAYERSCAPE=y
CONFIG_ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE=y
CONFIG_ARCH_MMAP_RND_BITS=18
CONFIG_ARCH_MMAP_RND_BITS_MAX=24
@@ -31,21 +32,33 @@ CONFIG_ARM64_PTR_AUTH=y
CONFIG_ARM64_PTR_AUTH_KERNEL=y
CONFIG_ARM64_SVE=y
CONFIG_ARM64_TAGGED_ADDR_ABI=y
-CONFIG_ARM64_VA_BITS=39
-CONFIG_ARM64_VA_BITS_39=y
+CONFIG_ARM64_VA_BITS=48
+CONFIG_ARM64_VA_BITS_48=y
CONFIG_ARM64_WORKAROUND_CLEAN_CACHE=y
CONFIG_ARM64_WORKAROUND_REPEAT_TLBI=y
CONFIG_ARM64_WORKAROUND_SPECULATIVE_AT=y
CONFIG_ARM_ARCH_TIMER_OOL_WORKAROUND=y
+# CONFIG_ARM_DMC620_PMU is not set
CONFIG_ARM_SBSA_WATCHDOG=y
+CONFIG_ARM_SMC_WATCHDOG=y
+CONFIG_ARM_SMMU=y
+# CONFIG_ARM_SMMU_DISABLE_BYPASS_BY_DEFAULT is not set
+# CONFIG_ARM_SMMU_LEGACY_DT_BINDINGS is not set
+CONFIG_ARM_SMMU_V3=y
+# CONFIG_ARM_SMMU_V3_PMU is not set
+# CONFIG_ARM_SMMU_V3_SVA is not set
CONFIG_ATOMIC64_SELFTEST=y
CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BLK_PM=y
CONFIG_CAVIUM_TX2_ERRATUM_219=y
CONFIG_CC_HAVE_STACKPROTECTOR_SYSREG=y
+CONFIG_CLK_LS1028A_PLLDIG=y
+CONFIG_CLK_QORIQ=y
CONFIG_CLK_SP810=y
CONFIG_CLK_VEXPRESS_OSC=y
+# CONFIG_COMMON_CLK_FSL_FLEXSPI is not set
+# CONFIG_COMMON_CLK_FSL_SAI is not set
# CONFIG_COMPAT_32BIT_TIME is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_MENU=y
@@ -62,6 +75,7 @@ CONFIG_CRYPTO_BLAKE2S=y
CONFIG_CRYPTO_CHACHA20=y
CONFIG_CRYPTO_CHACHA20_NEON=y
CONFIG_CRYPTO_CRYPTD=y
+# CONFIG_CRYPTO_DEV_FSL_DPAA2_CAAM is not set
CONFIG_CRYPTO_GHASH_ARM64_CE=y
CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
CONFIG_CRYPTO_LIB_CHACHA_GENERIC=y
@@ -94,13 +108,20 @@ CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_CMDLINE=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FRAME_POINTER=y
+# CONFIG_FSL_DPAA is not set
+# CONFIG_FSL_DPAA2_QDMA is not set
CONFIG_FSL_ERRATUM_A008585=y
+# CONFIG_FSL_FMAN is not set
+# CONFIG_FSL_IMX8_DDR_PMU is not set
+# CONFIG_FSL_PQ_MDIO is not set
CONFIG_FUJITSU_ERRATUM_010001=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_CSUM=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
+# CONFIG_GIANFAR is not set
CONFIG_GPIO_GENERIC=y
CONFIG_GPIO_GENERIC_PLATFORM=y
+CONFIG_GPIO_MPC8XXX=y
CONFIG_HDMI=y
# CONFIG_HISI_PMU is not set
CONFIG_HW_RANDOM=y
@@ -109,7 +130,16 @@ CONFIG_HW_RANDOM_VIRTIO=y
CONFIG_I2C=y
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_IMX=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
+# CONFIG_IMX2_WDT is not set
+# CONFIG_IOMMU_DEBUGFS is not set
+# CONFIG_IOMMU_DEFAULT_DMA_LAZY is not set
+CONFIG_IOMMU_DEFAULT_DMA_STRICT=y
+CONFIG_IOMMU_DEFAULT_PASSTHROUGH=y
+# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set
+# CONFIG_IOMMU_IO_PGTABLE_LPAE_SELFTEST is not set
+CONFIG_IOMMU_SUPPORT=y
CONFIG_KCMP=y
CONFIG_LCD_CLASS_DEVICE=m
# CONFIG_LCD_PLATFORM is not set
@@ -118,6 +148,12 @@ CONFIG_MFD_SYSCON=y
CONFIG_MFD_VEXPRESS_SYSREG=y
CONFIG_MMC=y
CONFIG_MMC_ARMMMCI=y
+CONFIG_MMC_RICOH_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_ACPI=y
+CONFIG_MMC_SDHCI_OF_ESDHC=y
+CONFIG_MMC_SDHCI_PCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_NO_HZ=y
@@ -125,6 +161,9 @@ CONFIG_NO_HZ_COMMON=y
CONFIG_NO_HZ_IDLE=y
CONFIG_NR_CPUS=64
CONFIG_NVIDIA_CARMEL_CNP_ERRATUM=y
+# CONFIG_NVMEM_LAYERSCAPE_SFP is not set
+CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_PCI_LAYERSCAPE=y
CONFIG_PM=y
CONFIG_PM_CLK=y
CONFIG_PM_GENERIC_DOMAINS=y
@@ -132,25 +171,32 @@ CONFIG_PM_GENERIC_DOMAINS_OF=y
CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_VEXPRESS=y
CONFIG_POWER_SUPPLY=y
+CONFIG_QORIQ_THERMAL=y
CONFIG_QUEUED_RWLOCKS=y
CONFIG_QUEUED_SPINLOCKS=y
CONFIG_REGMAP=y
CONFIG_REGMAP_MMIO=y
CONFIG_RODATA_FULL_DEFAULT_ENABLED=y
+# CONFIG_RTC_DRV_FSL_FTM_ALARM is not set
CONFIG_RTC_I2C_AND_SPI=y
CONFIG_SMC91X=y
CONFIG_SPARSEMEM=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
+# CONFIG_SPI_FSL_QUADSPI is not set
# CONFIG_SPI_HISI_KUNPENG is not set
# CONFIG_SPI_HISI_SFC_V3XX is not set
CONFIG_SYNC_FILE=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_THREAD_INFO_IN_TASK=y
CONFIG_UNMAP_KERNEL_AT_EL0=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_PLATFORM=y
CONFIG_VEXPRESS_CONFIG=y
CONFIG_VIDEOMODE_HELPERS=y
CONFIG_VIRTIO_DMA_SHARED_BUFFER=y
+# CONFIG_VIRTIO_IOMMU is not set
CONFIG_VMAP_STACK=y
CONFIG_ZONE_DMA32=y
diff --git a/target/linux/armvirt/config-5.15 b/target/linux/armvirt/config-5.15
index 4828e98dbf..d609207bbe 100644
--- a/target/linux/armvirt/config-5.15
+++ b/target/linux/armvirt/config-5.15
@@ -60,17 +60,17 @@ CONFIG_ARM64_VA_BITS_39=y
CONFIG_ARM_AMBA=y
CONFIG_ARM_ARCH_TIMER=y
CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
-# CONFIG_ARM_DMC620_PMU is not set
CONFIG_ARM_GIC=y
CONFIG_ARM_GIC_V2M=y
CONFIG_ARM_GIC_V3=y
CONFIG_ARM_GIC_V3_ITS=y
CONFIG_ARM_GIC_V3_ITS_PCI=y
CONFIG_ARM_PSCI_FW=y
-# CONFIG_ARM_SMMU_V3_PMU is not set
CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y
CONFIG_BALLOON_COMPACTION=y
CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_NVME=y
+CONFIG_BLK_DEV_SD=y
CONFIG_BLK_MQ_PCI=y
CONFIG_BLK_MQ_VIRTIO=y
CONFIG_CC_HAVE_STACKPROTECTOR_SYSREG=y
@@ -169,6 +169,7 @@ CONFIG_HZ_PERIODIC=y
# CONFIG_I2C_AMD_MP2 is not set
CONFIG_I2C_HID_ACPI=y
# CONFIG_I2C_HISI is not set
+# CONFIG_I2C_SLAVE_TESTUNIT is not set
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
# CONFIG_IMA_SECURE_AND_OR_TRUSTED_BOOT is not set
CONFIG_INITRAMFS_SOURCE=""
@@ -199,6 +200,8 @@ CONFIG_NET_FLOW_LIMIT=y
CONFIG_NLS=y
CONFIG_NR_CPUS=256
CONFIG_NVMEM=y
+CONFIG_NVME_CORE=y
+# CONFIG_NVME_MULTIPATH is not set
CONFIG_OF=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_EARLY_FLATTREE=y
@@ -247,6 +250,7 @@ CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
CONFIG_SERIAL_MCTRL_GPIO=y
+CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_SG_POOL=y
CONFIG_SMP=y
CONFIG_SOCK_RX_QUEUE_MAPPING=y
@@ -273,9 +277,14 @@ CONFIG_TIMER_OF=y
CONFIG_TIMER_PROBE=y
CONFIG_TREE_RCU=y
CONFIG_TREE_SRCU=y
+# CONFIG_UACCE is not set
CONFIG_UCS2_STRING=y
CONFIG_UNMAP_KERNEL_AT_EL0=y
+CONFIG_USB=y
+CONFIG_USB_STORAGE=y
CONFIG_USB_SUPPORT=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_PCI=y
CONFIG_VIRTIO=y
CONFIG_VIRTIO_BALLOON=y
CONFIG_VIRTIO_BLK=y
diff --git a/target/linux/armvirt/image/Makefile b/target/linux/armvirt/image/Makefile
index 50c993b522..e88544c963 100644
--- a/target/linux/armvirt/image/Makefile
+++ b/target/linux/armvirt/image/Makefile
@@ -106,7 +106,8 @@ define Device/generic
GRUB2_VARIANT := generic
FILESYSTEMS := ext4 squashfs
DEVICE_PACKAGES += kmod-amazon-ena kmod-e1000e kmod-vmxnet3 kmod-rtc-rx8025 \
- kmod-i2c-mux-pca954x kmod-gpio-pca953x partx-utils
+ kmod-i2c-mux-pca954x kmod-gpio-pca953x partx-utils kmod-wdt-sp805 \
+ kmod-fsl-dpaa2-net
endef
TARGET_DEVICES += generic
diff --git a/target/linux/armvirt/modules.mk b/target/linux/armvirt/modules.mk
new file mode 100644
index 0000000000..3ac3f6a27d
--- /dev/null
+++ b/target/linux/armvirt/modules.mk
@@ -0,0 +1,96 @@
+define KernelPackage/acpi-mdio
+ SUBMENU:=$(NETWORK_DEVICES_MENU)
+ TITLE:=ACPI MDIO support
+ DEPENDS:=@(TARGET_armvirt_64) +kmod-libphy +kmod-mdio-devres
+ KCONFIG:=CONFIG_ACPI_MDIO
+ FILES:=$(LINUX_DIR)/drivers/net/mdio/acpi_mdio.ko
+ AUTOLOAD:=$(call AutoLoad,11,acpi_mdio)
+endef
+
+define KernelPackage/acpi-mdio/description
+ Kernel driver for ACPI MDIO support
+endef
+
+$(eval $(call KernelPackage,acpi-mdio))
+
+define KernelPackage/fsl-pcs-lynx
+ SUBMENU=$(NETWORK_DEVICES_MENU)
+ DEPENDS:=@(TARGET_armvirt_64) +kmod-libphy +kmod-of-mdio +kmod-phylink
+ TITLE:=NXP (Freescale) Lynx PCS
+ HIDDEN:=1
+ KCONFIG:=CONFIG_PCS_LYNX
+ FILES=$(LINUX_DIR)/drivers/net/pcs/pcs-lynx.ko
+ AUTOLOAD=$(call AutoLoad,30,pcs-lynx)
+endef
+
+$(eval $(call KernelPackage,fsl-pcs-lynx))
+
+define KernelPackage/fsl-xgmac-mdio
+ SUBMENU=$(NETWORK_DEVICES_MENU)
+ DEPENDS:=@(TARGET_armvirt_64) +kmod-libphy +kmod-of-mdio +kmod-acpi-mdio
+ TITLE:=NXP (Freescale) MDIO bus
+ KCONFIG:=CONFIG_FSL_XGMAC_MDIO
+ FILES=$(LINUX_DIR)/drivers/net/ethernet/freescale/xgmac_mdio.ko
+ AUTOLOAD=$(call AutoLoad,30,xgmac_mdio)
+endef
+
+$(eval $(call KernelPackage,fsl-xgmac-mdio))
+
+define KernelPackage/fsl-mc-dpio
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=NXP DPAA2 DPIO (Data Path IO) driver
+ HIDDEN:=1
+ KCONFIG:=CONFIG_FSL_MC_BUS=y \
+ CONFIG_FSL_MC_DPIO
+ FILES:=$(LINUX_DIR)/drivers/soc/fsl/dpio/fsl-mc-dpio.ko
+ AUTOLOAD=$(call AutoLoad,30,fsl-mc-dpio)
+endef
+
+$(eval $(call KernelPackage,fsl-mc-dpio))
+
+define KernelPackage/fsl-dpaa2-net
+ SUBMENU:=$(NETWORK_DEVICES_MENU)
+ TITLE:=NXP DPAA2 Ethernet
+ DEPENDS:=@(TARGET_armvirt_64) +kmod-fsl-xgmac-mdio +kmod-phylink \
+ +kmod-fsl-pcs-lynx +kmod-fsl-mc-dpio
+ KCONFIG:= \
+ CONFIG_FSL_MC_UAPI_SUPPORT=y \
+ CONFIG_FSL_DPAA2_ETH
+ FILES:= \
+ $(LINUX_DIR)/drivers/net/ethernet/freescale/dpaa2/fsl-dpaa2-eth.ko
+ AUTOLOAD=$(call AutoLoad,35,fsl-dpaa2-eth)
+endef
+
+$(eval $(call KernelPackage,fsl-dpaa2-net))
+
+define KernelPackage/fsl-dpaa2-console
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=NXP DPAA2 Debug console
+ DEPENDS:=@(TARGET_armvirt_64)
+ KCONFIG:=CONFIG_DPAA2_CONSOLE
+ FILES=$(LINUX_DIR)/drivers/soc/fsl/dpaa2-console.ko
+ AUTOLOAD=$(call AutoLoad,40,dpaa2-console)
+endef
+
+define KernelPackage/fsl-dpaa2-console/description
+ Kernel modules for the NXP DPAA2 debug consoles
+ (Management Complex and AIOP).
+endef
+
+$(eval $(call KernelPackage,fsl-dpaa2-console))
+
+define KernelPackage/wdt-sp805
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=ARM SP805 Watchdog
+ KCONFIG:=CONFIG_ARM_SP805_WATCHDOG
+ FILES=$(LINUX_DIR)/drivers/watchdog/sp805_wdt.ko
+ AUTOLOAD=$(call AutoLoad,50,sp805_wdt)
+endef
+
+define KernelPackage/wdt-sp805/description
+ Support for the ARM SP805 wathchdog module.
+ This is present in the NXP Layerscape family,
+ HiSilicon HI3660 among others.
+endef
+
+$(eval $(call KernelPackage,wdt-sp805))
More information about the lede-commits
mailing list