[openwrt/openwrt] ramips: mt7621-dts: move wan port to gmac1 YunCore FAP-640

[LEDE Commits]

hauke pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/47c2d50c0312412582fff7950b843d619400da9f

commit 47c2d50c0312412582fff7950b843d619400da9f
Author: Volodymyr Puiul <volodymyr.puiul at gmail.com>
AuthorDate: Sat Jun 10 18:23:17 2023 +0400

    ramips: mt7621-dts: move wan port to gmac1 YunCore FAP-640
    
    move wan port to gmac1 to achieve 2Gbps CPU bandwidth between wan and
    lan on YunCore FAP-640
    
    Signed-off-by: Volodymyr Puiul <volodymyr.puiul at gmail.com>
---
 target/linux/ramips/dts/mt7621_yuncore_fap640.dts | 27 +++++++++++++++++------
 1 file changed, 20 insertions(+), 7 deletions(-)

diff --git a/target/linux/ramips/dts/mt7621_yuncore_fap640.dts b/target/linux/ramips/dts/mt7621_yuncore_fap640.dts
index a0c32a0211..d525dde385 100644
--- a/target/linux/ramips/dts/mt7621_yuncore_fap640.dts
+++ b/target/linux/ramips/dts/mt7621_yuncore_fap640.dts
@@ -148,10 +148,26 @@
 };
 
 &gmac0 {
+	nvmem-cells = <&macaddr_factory_e006>;
+	nvmem-cell-names = "mac-address";
+};
+
+&gmac1 {
+	status = "okay";
+	label = "wan";
+	phy-handle = <&ethphy4>;
+
 	nvmem-cells = <&macaddr_factory_0004>;
 	nvmem-cell-names = "mac-address";
 };
 
+&mdio {
+	ethphy4: ethernet-phy at 4 {
+		reg = <4>;
+	};
+};
+
+
 &switch0 {
 	gpio-controller;
 	#gpio-cells = <2>;
@@ -176,13 +192,6 @@
 			status = "okay";
 			label = "lan1";
 		};
-
-		port at 4 {
-			status = "okay";
-			label = "wan";
-			nvmem-cells = <&macaddr_factory_0004>;
-			nvmem-cell-names = "mac-address";
-		};
 	};
 };
 
@@ -201,5 +210,9 @@
 	macaddr_factory_0004: macaddr at 0004 {
 		reg = <0x0004 0x6>;
 	};
+
+	macaddr_factory_e006: macaddr at e006 {
+		reg = <0xe006 0x6>;
+	};
 };