[openwrt/openwrt] layerscape: remove Traverse LS1043 boards
LEDE Commits
lede-commits at lists.infradead.org
Wed Jul 26 04:38:46 PDT 2023
hauke pushed a commit to openwrt/openwrt.git, branch openwrt-23.05:
https://git.openwrt.org/cef98caf6e8d3c466ab303d376324304bbe6c365
commit cef98caf6e8d3c466ab303d376324304bbe6c365
Author: Mathew McBride <matt at traverse.com.au>
AuthorDate: Tue Jun 27 04:20:50 2023 +0000
layerscape: remove Traverse LS1043 boards
The Traverse LS1043 boards were not publicly released,
all the production has been going to OEM customers who
do not use the image format defined in the OpenWrt tree.
Only a few samples were circulated outside Traverse
and our OEM customers. The public release (then called
Five64) of this series was cancelled in favour of our
LS1088A based design (Ten64).
It is best to remove these boards to avoid wasting
OpenWrt project and contributor resources.
Signed-off-by: Mathew McBride <matt at traverse.com.au>
(cherry picked from commit 8e7ba6fbae80838c2219ee38307af9c883606c2c)
---
package/boot/uboot-envtools/files/layerscape | 4 -
.../linux/layerscape/base-files/etc/board.d/01_led | 8 -
.../layerscape/base-files/etc/board.d/02_network | 8 -
.../base-files/etc/board.d/03_gpio_switches | 11 -
.../lib/preinit/05_layerscape_reorder_eth | 26 --
.../layerscape/base-files/lib/upgrade/platform.sh | 26 --
.../arm64/boot/dts/freescale/traverse-ls1043s.dts | 332 ---------------------
.../arm64/boot/dts/freescale/traverse-ls1043v.dts | 253 ----------------
target/linux/layerscape/image/Makefile | 13 -
target/linux/layerscape/image/armv8_64b.mk | 32 --
.../300-add-DTS-for-Traverse-LS1043-Boards.patch | 26 --
11 files changed, 739 deletions(-)
diff --git a/package/boot/uboot-envtools/files/layerscape b/package/boot/uboot-envtools/files/layerscape
index bc7dcf24f9..acc5a073ad 100644
--- a/package/boot/uboot-envtools/files/layerscape
+++ b/package/boot/uboot-envtools/files/layerscape
@@ -12,10 +12,6 @@ touch /etc/config/ubootenv
board=$(board_name)
case "$board" in
- traverse,ls1043v|\
- traverse,ls1043s)
- ubootenv_add_uci_config "/dev/mtd1" "0x40000" "0x2000" "0x20000"
- ;;
traverse,ten64)
ubootenv_add_uci_config "/dev/mtd3" "0x0000" "0x80000" "0x80000"
;;
diff --git a/target/linux/layerscape/base-files/etc/board.d/01_led b/target/linux/layerscape/base-files/etc/board.d/01_led
index a21c21980a..8a0e5c4b95 100644
--- a/target/linux/layerscape/base-files/etc/board.d/01_led
+++ b/target/linux/layerscape/base-files/etc/board.d/01_led
@@ -9,14 +9,6 @@ board_config_update
board=$(board_name)
case "$board" in
-traverse,ls1043v)
- ucidef_set_led_netdev "wan" "WAN LED" "ls1043v:yellow:wan" "eth4"
- ;;
-traverse,ls1043s)
- ucidef_set_led_netdev "wan" "WAN LED" "ls1043s:yellow:wan" "eth4"
- ucidef_set_led_netdev "xgact" "10G Activity" "ls1043s:yellow:10gact" "eth6"
- ucidef_set_led_netdev "xglink" "10G Link" "ls1043s:green:10glink" "eth6"
- ;;
traverse,ten64)
ucidef_set_led_netdev "sfp1" "SFP 1" "ten64:green:sfp1:down" "eth8" "link tx rx"
ucidef_set_led_netdev "sfp2" "SFP 2" "ten64:green:sfp2:up" "eth9" "link tx rx"
diff --git a/target/linux/layerscape/base-files/etc/board.d/02_network b/target/linux/layerscape/base-files/etc/board.d/02_network
index 7bc5f9b502..0a42323801 100644
--- a/target/linux/layerscape/base-files/etc/board.d/02_network
+++ b/target/linux/layerscape/base-files/etc/board.d/02_network
@@ -9,14 +9,6 @@ case "$(board_name)" in
fsl,ls1028a-rdb-sdboot)
ucidef_set_interfaces_lan_wan "swp0 swp1 swp2 swp3" "eth0"
;;
- traverse,ls1043v)
- ucidef_set_interface_lan "eth0 eth1 eth2 eth3"
- ucidef_set_interface_wan "eth4"
- ;;
- traverse,ls1043s)
- ucidef_set_interface_lan "eth0 eth1 eth2 eth3 eth6"
- ucidef_set_interface_wan "eth4"
- ;;
traverse,ten64)
ucidef_set_interface_lan "eth0 eth1 eth2 eth3"
ucidef_set_interface_wan "eth6"
diff --git a/target/linux/layerscape/base-files/etc/board.d/03_gpio_switches b/target/linux/layerscape/base-files/etc/board.d/03_gpio_switches
index 5e0e24ef28..46e54b960d 100644
--- a/target/linux/layerscape/base-files/etc/board.d/03_gpio_switches
+++ b/target/linux/layerscape/base-files/etc/board.d/03_gpio_switches
@@ -9,17 +9,6 @@ board_config_update
board=$(board_name)
case "$board" in
-traverse,ls1043v)
- ucidef_add_gpio_switch "lte_reset" "LTE Reset" "377"
- ucidef_add_gpio_switch "lte_disable" "LTE Airplane mode" "378"
- ;;
-traverse,ls1043s)
- ucidef_add_gpio_switch "tensfp_txdisable" "SFP+ TX Disable" "378"
- ucidef_add_gpio_switch "gigsfp_txdisable" "SFP TX Disable" "381"
- ucidef_add_gpio_switch "lte_reset" "LTE Reset" "502"
- ucidef_add_gpio_switch "lte_disable" "LTE Airplane Mode" "394"
- ucidef_add_gpio_switch "lte_power" "LTE Power" "395"
- ;;
traverse,ten64)
ucidef_add_gpio_switch "lte_reset" "Cell Modem Reset" "376"
ucidef_add_gpio_switch "lte_power" "Cell Modem Power" "377"
diff --git a/target/linux/layerscape/base-files/lib/preinit/05_layerscape_reorder_eth b/target/linux/layerscape/base-files/lib/preinit/05_layerscape_reorder_eth
deleted file mode 100644
index c6b741a5ce..0000000000
--- a/target/linux/layerscape/base-files/lib/preinit/05_layerscape_reorder_eth
+++ /dev/null
@@ -1,26 +0,0 @@
-reorder_layerscape_interfaces() {
- if [ ! -f /tmp/sysinfo/board_name ]; then
- echo "No board name found, not doing reorder_layerscape_interfaces"
- return 0
- fi
-
- board=$(cat /tmp/sysinfo/board_name)
- case "$board" in
- traverse,ls1043v|\
- traverse,ls1043s)
-
- # Reorder ethernet interfaces to match the physical order
- ip link set eth2 name fm1-mac3
- ip link set eth4 name eth2
- ip link set eth3 name fm1-mac4
- ip link set eth5 name eth3
- ip link set fm1-mac3 name eth4
- ip link set fm1-mac4 name eth5
- ;;
- default)
- echo "Unknown board $board"
- ;;
- esac
-}
-
-boot_hook_add preinit_main reorder_layerscape_interfaces
diff --git a/target/linux/layerscape/base-files/lib/upgrade/platform.sh b/target/linux/layerscape/base-files/lib/upgrade/platform.sh
index c63cf05e5c..0b5d14b579 100644
--- a/target/linux/layerscape/base-files/lib/upgrade/platform.sh
+++ b/target/linux/layerscape/base-files/lib/upgrade/platform.sh
@@ -31,23 +31,6 @@ platform_do_upgrade_sdboot() {
echo "Writing rootfs..."
tar xf $tar_file ${board_dir}/root -O | dd of=/dev/mmcblk0p2 bs=512k > /dev/null 2>&1
-}
-platform_do_upgrade_traverse_nandubi() {
- bootsys=$(fw_printenv bootsys | awk -F= '{{print $2}}')
- newbootsys=2
- if [ "$bootsys" -eq "2" ]; then
- newbootsys=1
- fi
-
- # If nand_do_upgrade succeeds, we don't have an opportunity to add any actions of
- # our own, so do it here and set back on failure
- echo "Setting bootsys to #${newbootsys}"
- fw_setenv bootsys $newbootsys
- CI_UBIPART="nandubi"
- CI_KERNPART="kernel${newbootsys}"
- CI_ROOTPART="rootfs${newbootsys}"
- nand_do_upgrade "$1" || (echo "Upgrade failed, setting bootsys ${bootsys}" && fw_setenv bootsys $bootsys)
-
}
platform_do_upgrade_traverse_slotubi() {
@@ -105,11 +88,6 @@ platform_check_image() {
local board=$(board_name)
case "$board" in
- traverse,ls1043v | \
- traverse,ls1043s)
- nand_do_platform_check "traverse-ls1043" $1
- return $?
- ;;
traverse,ten64)
nand_do_platform_check "ten64-mtd" $1
return $?
@@ -150,10 +128,6 @@ platform_do_upgrade() {
touch /var/lock/fw_printenv.lock
case "$board" in
- traverse,ls1043v | \
- traverse,ls1043s)
- platform_do_upgrade_traverse_nandubi "$1"
- ;;
traverse,ten64)
platform_do_upgrade_traverse_slotubi "${1}"
;;
diff --git a/target/linux/layerscape/files/arch/arm64/boot/dts/freescale/traverse-ls1043s.dts b/target/linux/layerscape/files/arch/arm64/boot/dts/freescale/traverse-ls1043s.dts
deleted file mode 100644
index 81044aab3a..0000000000
--- a/target/linux/layerscape/files/arch/arm64/boot/dts/freescale/traverse-ls1043s.dts
+++ /dev/null
@@ -1,332 +0,0 @@
-/*
- * Device Tree Include file for Traverse LS1043S board.
- *
- * Copyright 2014-2015, Freescale Semiconductor
- * Copyright 2017-2018, Traverse Technologies
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "fsl-ls1043a.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- model = "Traverse LS1043S";
- compatible = "traverse,ls1043s";
-
- aliases {
- crypto = &crypto;
- ethernet0 = &EMAC0;
- ethernet1 = &EMAC1;
- ethernet2 = &EMAC2;
- ethernet3 = &EMAC3;
- ethernet4 = &EMAC4;
- ethernet5 = &EMAC5;
- };
-
- leds {
- compatible = "gpio-leds";
- gpio0 {
- label = "ls1043s:green:user0";
- gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
- };
- gpio1 {
- label = "ls1043s:green:user1";
- gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
- };
- /* LED D17 */
- gpio2 {
- label = "ls1043s:green:wan";
- gpios = <&gpio1 26 GPIO_ACTIVE_LOW>;
- };
- gpio3 {
- label = "ls1043s:yellow:wan";
- gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
- };
- /* LED D18 */
- gpio4 {
- label = "ls1043s:green:mgmt";
- gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
- };
- gpio5 {
- label = "ls1043s:yellow:mgmt";
- gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
- };
- /* LED D6 */
- gpio6 {
- label = "ls1043s:green:user2";
- gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
- };
-
- /* SFP+ LEDs - these are for chassis
- * with lightpipes only
- */
- teng_act {
- label = "ls1043s:yellow:10gact";
- gpios = <&gpio4 0 GPIO_ACTIVE_LOW>;
- };
-
- teng_link {
- label = "ls1043s:green:10glink";
- gpios = <&gpio4 1 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
- poll-interval = <1000>;
- /* This button may not be loaded on all boards */
- button at 0 {
- label = "Front button";
- linux,code = <KEY_SETUP>;
- gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
- };
- /* This is wired to header S3 */
- button at 1 {
- label = "Rear button";
- linux,code = <KEY_WPS_BUTTON>;
- gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&esdhc {
- mmc-hs200-1_8v;
- sd-uhs-sdr104;
- sd-uhs-sdr50;
- sd-uhs-sdr25;
- sd-uhs-sdr12;
-};
-
-&i2c0 {
- status = "okay";
- rtc at 6f {
- compatible = "intersil,isl1208";
- reg = <0x6f>;
- };
-
- sfp_pca9534: pca9534 at 24 {
- compatible = "ti,tca9534", "nxp,pca9534";
- gpio-controller;
- #gpio-cells = <2>;
- reg = <0x24>;
- gpio-base = <100>;
- };
-
- controller at 50 {
- compatible = "traverse,controller";
- reg = <0x50>;
- };
-
- ds125df111 at 18 {
- compatible = "ti,ds125df111";
- reg = <0x18>;
- };
-
- emc1704 at 4c {
- compatible = "microchip,emc1704";
- reg = <0x4c>;
- };
-
- pac1934 at 16 {
- compatible = "microchip,pac1934";
- reg = <0x16>;
- /* Monitoring 3.3V, 5V, Vin/12V (voltage only), Vbat/RTC (voltage only) */
- shunt-resistors = <4000 12000 0 0>;
- };
-
- pmic at 8 {
- compatible = "freescale,mc34vr500";
- reg = <0x08>;
- };
-};
-
-/* I2C Bus for SFP EEPROM and control
- * These are multiplexed so
- * they don't collide when loaded
- */
-&i2c3 {
- status = "okay";
- i2c-switch at 70 {
- compatible = "nxp,pca9540";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x70>;
-
- gigsfp_i2c: i2c at 0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- };
- tensfp_i2c: i2c at 1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
- };
- };
-};
-
-&ifc {
- status = "okay";
- #address-cells = <2>;
- #size-cells = <1>;
- /* Only NAND flash is used on this board */
- ranges = <0x0 0x0 0x0 0x7e800000 0x00010000>;
-
- nand at 1,0 {
- compatible = "fsl,ifc-nand";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x0 0x0 0x10000>;
- };
-};
-
-&duart0 {
- status = "okay";
-};
-
-&duart1 {
- status = "okay";
-};
-
-#include "fsl-ls1043-post.dtsi"
-
-&fman0 {
- EMAC0: ethernet at e0000 {
- phy-handle = <&qsgmii_phy1>;
- phy-connection-type = "qsgmii";
- local-mac-address = [0A 00 00 00 00 01];
- };
-
- EMAC1: ethernet at e2000 {
- phy-handle = <&qsgmii_phy2>;
- phy-connection-type = "qsgmii";
- local-mac-address = [0A 00 00 00 00 02];
- };
-
- EMAC2: ethernet at e8000 {
- phy-handle = <&qsgmii_phy3>;
- phy-connection-type = "qsgmii";
- local-mac-address = [0A 00 00 00 00 03];
- };
-
- EMAC3: ethernet at ea000 {
- phy-handle = <&qsgmii_phy4>;
- phy-connection-type = "qsgmii";
- local-mac-address = [0A 00 00 00 00 04];
- };
-
- /* SFP via AR8031
- * We treat this as a fixed-link as the
- * AR8031 is hard-configured into
- * 1000BASE-X mode
- * Should MII control be desired, remove
- * fixed-link and add
- * phy-handle = <&rgmii_phy1>;
- */
- EMAC4: ethernet at e4000 {
- phy-connection-type = "rgmii";
- local-mac-address = [0A 00 00 00 00 05];
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
- };
-
- /* Connection to Expansion (M.2) slot
- * Future WAN (i.e xDSL) plugin
- */
- EMAC5: ethernet at e6000 {
- phy-connection-type = "rgmii-id";
- local-mac-address = [00 00 00 00 00 06];
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
- };
-
- /* 10G SFP+ interface
- * This can also run at 1.25 and 2.5G with
- * the appropriate SerDes protocol setting in RCW
- */
- TENSFP: ethernet at f0000 {
- status = "okay";
- phy-connection-type = "xgmii";
- fixed-link {
- speed = <10000>;
- full-duplex;
- };
- };
-
- mdio at fc000 {
- rgmii_phy1: ethernet-phy at 2 {
- reg = <0x2>;
- };
- qsgmii_phy1: ethernet-phy at 4 {
- reg = <0x4>;
- };
- qsgmii_phy2: ethernet-phy at 5 {
- reg = <0x5>;
- };
- qsgmii_phy3: ethernet-phy at 6 {
- reg = <0x6>;
- };
- qsgmii_phy4: ethernet-phy at 7 {
- reg = <0x7>;
- };
- };
-};
-
-/* No QUICC engine functions on this board -
- * pins are used for other functions (GPIO, I2C etc.)
- */
-&uqe {
- status = "disabled";
-};
-
-/* LS1043S does not use the QorIQ AHCI
- * controller.
- */
-&sata {
- status = "disabled";
-};
diff --git a/target/linux/layerscape/files/arch/arm64/boot/dts/freescale/traverse-ls1043v.dts b/target/linux/layerscape/files/arch/arm64/boot/dts/freescale/traverse-ls1043v.dts
deleted file mode 100644
index 936875101f..0000000000
--- a/target/linux/layerscape/files/arch/arm64/boot/dts/freescale/traverse-ls1043v.dts
+++ /dev/null
@@ -1,253 +0,0 @@
-/*
- * Device Tree Include file for Traverse LS1043V board.
- *
- * Copyright 2014-2015, Freescale Semiconductor
- * Copyright 2017, Traverse Technologies
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "fsl-ls1043a.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- model = "Traverse LS1043V";
- compatible = "traverse,ls1043v";
-
- aliases {
- crypto = &crypto;
- ethernet0 = &EMAC0;
- ethernet1 = &EMAC1;
- ethernet2 = &EMAC2;
- ethernet3 = &EMAC3;
- ethernet4 = &EMAC4;
- ethernet5 = &EMAC5;
- pca9555 = &pca9555;
- };
-
- leds {
- compatible = "gpio-leds";
- gpio0 {
- label = "ls1043v:green:user0";
- gpios = <&pca9555 0 GPIO_ACTIVE_LOW>;
- };
- gpio1 {
- label = "ls1043v:yellow:user0";
- gpios = <&pca9555 1 GPIO_ACTIVE_LOW>;
- };
- gpio2 {
- label = "ls1043v:green:user1";
- gpios = <&pca9555 2 GPIO_ACTIVE_LOW>;
- };
- gpio3 {
- label = "ls1043v:yellow:user1";
- gpios = <&pca9555 3 GPIO_ACTIVE_LOW>;
- };
- gpio4 {
- label = "ls1043v:green:user2";
- gpios = <&pca9555 4 GPIO_ACTIVE_HIGH>;
- };
- gpio5 {
- label = "ls1043v:yellow:wlan";
- gpios = <&pca9555 5 GPIO_ACTIVE_HIGH>;
- };
- gpio6 {
- label = "ls1043v:yellow:wan";
- gpios = <&pca9555 6 GPIO_ACTIVE_HIGH>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
- poll-interval = <1000>;
- button at 0 {
- label = "Front button";
- linux,code = <KEY_SETUP>;
- gpios = <&pca9555 14 GPIO_ACTIVE_LOW>;
- };
- button at 1 {
- label = "Rear button";
- linux,code = <KEY_WPS_BUTTON>;
- gpios = <&pca9555 15 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&i2c0 {
- status = "okay";
- rtc at 6f {
- compatible = "intersil,isl1208";
- reg = <0x6f>;
- };
-
- pca9555: pca9555 at 20 {
- compatible = "nxp,pca9555";
- gpio-controller;
- #gpio-cells = <2>;
- reg = <0x20>;
- gpio-base = <0>;
- };
-
- /* CPU core temp sensor and VDD (1.0V) sensor */
- ltc2990 at 4c {
- compatible = "lltc,ltc2990";
- reg = <0x4C>;
- lltc,meas-mode = <4 3>;
- };
-
- /* 3.3V and 5V monitor (may not be loaded on some SKUs) */
- ltc2990 at 4f {
- compatible = "lltc,ltc2990";
- reg = <0x4F>;
- lltc,meas-mode = <6 3>;
- };
-};
-
-&ifc {
- status = "okay";
- #address-cells = <2>;
- #size-cells = <1>;
- /* Only NAND flash is used on this board */
- ranges = <0x0 0x0 0x0 0x7e800000 0x00010000>;
-
- nand at 1,0 {
- compatible = "fsl,ifc-nand";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x0 0x0 0x10000>;
- };
-};
-
-&duart0 {
- status = "okay";
-};
-
-&duart1 {
- status = "okay";
-};
-
-#include "fsl-ls1043-post.dtsi"
-
-&fman0 {
- EMAC0: ethernet at e0000 {
- phy-handle = <&qsgmii_phy1>;
- phy-connection-type = "qsgmii";
- local-mac-address = [0A 00 00 00 00 01];
- };
-
- EMAC1: ethernet at e2000 {
- phy-handle = <&qsgmii_phy2>;
- phy-connection-type = "qsgmii";
- local-mac-address = [0A 00 00 00 00 02];
- };
-
- EMAC2: ethernet at e8000 {
- phy-handle = <&qsgmii_phy3>;
- phy-connection-type = "qsgmii";
- local-mac-address = [0A 00 00 00 00 03];
- };
-
- EMAC3: ethernet at ea000 {
- phy-handle = <&qsgmii_phy4>;
- phy-connection-type = "qsgmii";
- local-mac-address = [0A 00 00 00 00 04];
- };
- EMAC4: ethernet at e4000 {
- phy-handle = <&rgmii_phy1>;
- phy-connection-type = "rgmii";
- local-mac-address = [0A 00 00 00 00 05];
- };
-
- /* Connection to VDSL SoC */
- EMAC5: ethernet at e6000 {
- phy-connection-type = "rgmii-id";
- local-mac-address = [00 00 00 00 00 06];
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
- };
-
- /* 10G XFI interface - not in use on this platform */
- TENSFP: ethernet at f0000 {
- status = "disabled";
-
- phy-connection-type = "sgmii";
- fixed-link {
- /* NB: speed = 1000 and sgmii allows forward compatibility
- * with both 1G and 10G, the same is not true
- * in the reverse.
- */
- speed = <1000>;
- full-duplex;
- };
- };
-
- mdio at fc000 {
- rgmii_phy1: ethernet-phy at 3 {
- reg = <0x3>;
- };
- qsgmii_phy1: ethernet-phy at 4 {
- reg = <0x4>;
- };
- qsgmii_phy2: ethernet-phy at 5 {
- reg = <0x5>;
- };
- qsgmii_phy3: ethernet-phy at 6 {
- reg = <0x6>;
- };
- qsgmii_phy4: ethernet-phy at 7 {
- reg = <0x7>;
- };
- };
-};
-
-/* No QUICC engine functions on this board */
-&uqe {
- status = "disabled";
-};
-
-/* No SATA/AHCI on this board */
-&sata {
- status = "disabled";
-};
diff --git a/target/linux/layerscape/image/Makefile b/target/linux/layerscape/image/Makefile
index 1463a3eaea..dfbda85b36 100644
--- a/target/linux/layerscape/image/Makefile
+++ b/target/linux/layerscape/image/Makefile
@@ -51,19 +51,6 @@ define Build/ls-append-sdhead
dd if=$(STAGING_DIR_IMAGE)/$(1)-sdcard-head.img >> $@
endef
-define Build/traverse-fit
- ./mkits-multiple-config.sh -o $@.its -A $(LINUX_KARCH) \
- -v $(LINUX_VERSION) -k $@ -a $(KERNEL_LOADADDR) \
- -e $(if $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \
- -C gzip -c 1 -c 2 \
- -d $(DEVICE_DTS_DIR)/freescale/traverse-ls1043s.dtb \
- -D "Traverse_LS1043S" -n "ls1043s" -a $(FDT_LOADADDR) -c 1 \
- -d $(DEVICE_DTS_DIR)/freescale/traverse-ls1043v.dtb \
- -D "Traverse_LS1043V" -n "ls1043v" -a $(FDT_LOADADDR) -c 2
- PATH=$(LINUX_DIR)/scripts/dtc:$(PATH) mkimage -f $@.its $@.new
- @mv -f $@.new $@
-endef
-
define Build/traverse-fit-ls1088
./mkits-multiple-config.sh -o $@.its -A $(LINUX_KARCH) \
-v $(LINUX_VERSION) -k $@ -a $(KERNEL_LOADADDR) \
diff --git a/target/linux/layerscape/image/armv8_64b.mk b/target/linux/layerscape/image/armv8_64b.mk
index 0016e3bde8..259bacee31 100644
--- a/target/linux/layerscape/image/armv8_64b.mk
+++ b/target/linux/layerscape/image/armv8_64b.mk
@@ -420,38 +420,6 @@ define Device/fsl_lx2160a-rdb-sdboot
endef
TARGET_DEVICES += fsl_lx2160a-rdb-sdboot
-define Device/traverse_ls1043
- DEVICE_VENDOR := Traverse
- DEVICE_MODEL := LS1043 Boards
- KERNEL_NAME := Image
- KERNEL_SUFFIX := -kernel.itb
- KERNEL_INSTALL := 1
- FDT_LOADADDR = 0x90000000
- FILESYSTEMS := ubifs
- MKUBIFS_OPTS := -m 1 -e 262016 -c 128
- DEVICE_PACKAGES += \
- layerscape-fman \
- uboot-envtools \
- kmod-i2c-mux-pca954x \
- kmod-hwmon-core \
- kmod-gpio-pca953x kmod-input-gpio-keys-polled \
- kmod-rtc-isl1208
- DEVICE_DESCRIPTION = \
- Build images for Traverse LS1043 boards. This generates a single image \
- capable of booting on any of the boards in this family.
- DEVICE_DTS = freescale/traverse-ls1043s
- DEVICE_DTS_DIR = $(LINUX_DIR)/arch/arm64/boot/dts
- DEVICE_DTS_CONFIG = ls1043s
- KERNEL := kernel-bin | gzip | traverse-fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
- KERNEL_INITRAMFS := kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
- IMAGES = root sysupgrade.bin
- IMAGE/root = append-rootfs
- IMAGE/sysupgrade.bin = sysupgrade-tar | append-metadata
- MKUBIFS_OPTS := -m 2048 -e 124KiB -c 4096
- SUPPORTED_DEVICES := traverse,ls1043s traverse,ls1043v
-endef
-TARGET_DEVICES += traverse_ls1043
-
define Device/traverse_ten64_mtd
DEVICE_VENDOR := Traverse
DEVICE_MODEL := Ten64 (NAND boot)
diff --git a/target/linux/layerscape/patches-5.15/300-add-DTS-for-Traverse-LS1043-Boards.patch b/target/linux/layerscape/patches-5.15/300-add-DTS-for-Traverse-LS1043-Boards.patch
deleted file mode 100644
index 110afedefd..0000000000
--- a/target/linux/layerscape/patches-5.15/300-add-DTS-for-Traverse-LS1043-Boards.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From 5b35aae22b4ca2400e49561c9267aa01346f91d4 Mon Sep 17 00:00:00 2001
-From: Mathew McBride <matt at traverse.com.au>
-Date: Tue, 17 Apr 2018 10:01:03 +1000
-Subject: [PATCH] add DTS for Traverse LS1043 Boards
-
-Signed-off-by: Mathew McBride <matt at traverse.com.au>
-[rebase]
-Signed-off-by: Yangbo Lu <yangbo.lu at nxp.com>
----
- arch/arm64/boot/dts/freescale/Makefile | 3 +++
- arch/arm64/boot/dts/freescale/traverse-ls1043s.dts | 29 ++++++++++++++++++++++
- arch/arm64/boot/dts/freescale/traverse-ls1043v.dts | 29 ++++++++++++++++++++++
- 3 files changed, 61 insertions(+)
-
---- a/arch/arm64/boot/dts/freescale/Makefile
-+++ b/arch/arm64/boot/dts/freescale/Makefile
-@@ -31,6 +31,9 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2
- dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-rdb.dtb
- dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2162a-qds.dtb
-
-+dtb-$(CONFIG_ARCH_LAYERSCAPE) += traverse-ls1043v.dtb
-+dtb-$(CONFIG_ARCH_LAYERSCAPE) += traverse-ls1043s.dtb
-+
- dtb-$(CONFIG_ARCH_MXC) += imx8mm-beacon-kit.dtb
- dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb
- dtb-$(CONFIG_ARCH_MXC) += imx8mm-ddr4-evk.dtb
More information about the lede-commits
mailing list