[openwrt/openwrt] mediatek: use backported Ethernet PHY driver also for 5.15
LEDE Commits
lede-commits at lists.infradead.org
Thu Jul 13 04:06:03 PDT 2023
dangole pushed a commit to openwrt/openwrt.git, branch openwrt-23.05:
https://git.openwrt.org/6092c39c13232dcccf9794c2b9e4b4a820ba1c4a
commit 6092c39c13232dcccf9794c2b9e4b4a820ba1c4a
Author: Daniel Golle <daniel at makrotopia.org>
AuthorDate: Sat Jul 8 17:21:27 2023 +0100
mediatek: use backported Ethernet PHY driver also for 5.15
Backport in-SoC Gigabit Ethernet PHY driver instead of carrying the
driver in files-5.15.
Signed-off-by: Daniel Golle <daniel at makrotopia.org>
(cherry picked from commit 9fac59009657068d5a58b3d0255d4ca1507dd457)
---
.../files-5.15/drivers/net/phy/mediatek-ge-soc.c | 1263 --------------------
...-driver-for-MediaTek-SoC-built-in-GE-PHYs.patch | 82 --
...-driver-for-MediaTek-SoC-built-in-GE-PHYs.patch | 1204 +++++++++++++++++++
...iatek-ge-soc-initialize-MT7988-PHY-LEDs-d.patch | 213 ++++
4 files changed, 1417 insertions(+), 1345 deletions(-)
diff --git a/target/linux/mediatek/files-5.15/drivers/net/phy/mediatek-ge-soc.c b/target/linux/mediatek/files-5.15/drivers/net/phy/mediatek-ge-soc.c
deleted file mode 100644
index e48502ac3f..0000000000
--- a/target/linux/mediatek/files-5.15/drivers/net/phy/mediatek-ge-soc.c
+++ /dev/null
@@ -1,1263 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-#include <linux/bitfield.h>
-#include <linux/module.h>
-#include <linux/nvmem-consumer.h>
-#include <linux/of_address.h>
-#include <linux/of_platform.h>
-#include <linux/pinctrl/consumer.h>
-#include <linux/phy.h>
-
-#define MTK_GPHY_ID_MT7981 0x03a29461
-#define MTK_GPHY_ID_MT7988 0x03a29481
-
-#define MTK_EXT_PAGE_ACCESS 0x1f
-#define MTK_PHY_PAGE_STANDARD 0x0000
-#define MTK_PHY_PAGE_EXTENDED_3 0x0003
-
-#define MTK_PHY_LPI_REG_14 0x14
-#define MTK_PHY_LPI_WAKE_TIMER_1000_MASK GENMASK(8, 0)
-
-#define MTK_PHY_LPI_REG_1c 0x1c
-#define MTK_PHY_SMI_DET_ON_THRESH_MASK GENMASK(13, 8)
-
-#define MTK_PHY_PAGE_EXTENDED_2A30 0x2a30
-#define MTK_PHY_PAGE_EXTENDED_52B5 0x52b5
-
-#define ANALOG_INTERNAL_OPERATION_MAX_US 20
-#define TXRESERVE_MIN 0
-#define TXRESERVE_MAX 7
-
-#define MTK_PHY_ANARG_RG 0x10
-#define MTK_PHY_TCLKOFFSET_MASK GENMASK(12, 8)
-
-/* Registers on MDIO_MMD_VEND1 */
-#define MTK_PHY_TXVLD_DA_RG 0x12
-#define MTK_PHY_DA_TX_I2MPB_A_GBE_MASK GENMASK(15, 10)
-#define MTK_PHY_DA_TX_I2MPB_A_TBT_MASK GENMASK(5, 0)
-
-#define MTK_PHY_TX_I2MPB_TEST_MODE_A2 0x16
-#define MTK_PHY_DA_TX_I2MPB_A_HBT_MASK GENMASK(15, 10)
-#define MTK_PHY_DA_TX_I2MPB_A_TST_MASK GENMASK(5, 0)
-
-#define MTK_PHY_TX_I2MPB_TEST_MODE_B1 0x17
-#define MTK_PHY_DA_TX_I2MPB_B_GBE_MASK GENMASK(13, 8)
-#define MTK_PHY_DA_TX_I2MPB_B_TBT_MASK GENMASK(5, 0)
-
-#define MTK_PHY_TX_I2MPB_TEST_MODE_B2 0x18
-#define MTK_PHY_DA_TX_I2MPB_B_HBT_MASK GENMASK(13, 8)
-#define MTK_PHY_DA_TX_I2MPB_B_TST_MASK GENMASK(5, 0)
-
-#define MTK_PHY_TX_I2MPB_TEST_MODE_C1 0x19
-#define MTK_PHY_DA_TX_I2MPB_C_GBE_MASK GENMASK(13, 8)
-#define MTK_PHY_DA_TX_I2MPB_C_TBT_MASK GENMASK(5, 0)
-
-#define MTK_PHY_TX_I2MPB_TEST_MODE_C2 0x20
-#define MTK_PHY_DA_TX_I2MPB_C_HBT_MASK GENMASK(13, 8)
-#define MTK_PHY_DA_TX_I2MPB_C_TST_MASK GENMASK(5, 0)
-
-#define MTK_PHY_TX_I2MPB_TEST_MODE_D1 0x21
-#define MTK_PHY_DA_TX_I2MPB_D_GBE_MASK GENMASK(13, 8)
-#define MTK_PHY_DA_TX_I2MPB_D_TBT_MASK GENMASK(5, 0)
-
-#define MTK_PHY_TX_I2MPB_TEST_MODE_D2 0x22
-#define MTK_PHY_DA_TX_I2MPB_D_HBT_MASK GENMASK(13, 8)
-#define MTK_PHY_DA_TX_I2MPB_D_TST_MASK GENMASK(5, 0)
-
-#define MTK_PHY_RXADC_CTRL_RG7 0xc6
-#define MTK_PHY_DA_AD_BUF_BIAS_LP_MASK GENMASK(9, 8)
-
-#define MTK_PHY_RXADC_CTRL_RG9 0xc8
-#define MTK_PHY_DA_RX_PSBN_TBT_MASK GENMASK(14, 12)
-#define MTK_PHY_DA_RX_PSBN_HBT_MASK GENMASK(10, 8)
-#define MTK_PHY_DA_RX_PSBN_GBE_MASK GENMASK(6, 4)
-#define MTK_PHY_DA_RX_PSBN_LP_MASK GENMASK(2, 0)
-
-#define MTK_PHY_LDO_OUTPUT_V 0xd7
-
-#define MTK_PHY_RG_ANA_CAL_RG0 0xdb
-#define MTK_PHY_RG_CAL_CKINV BIT(12)
-#define MTK_PHY_RG_ANA_CALEN BIT(8)
-#define MTK_PHY_RG_ZCALEN_A BIT(0)
-
-#define MTK_PHY_RG_ANA_CAL_RG1 0xdc
-#define MTK_PHY_RG_ZCALEN_B BIT(12)
-#define MTK_PHY_RG_ZCALEN_C BIT(8)
-#define MTK_PHY_RG_ZCALEN_D BIT(4)
-#define MTK_PHY_RG_TXVOS_CALEN BIT(0)
-
-#define MTK_PHY_RG_ANA_CAL_RG5 0xe0
-#define MTK_PHY_RG_REXT_TRIM_MASK GENMASK(13, 8)
-
-#define MTK_PHY_RG_TX_FILTER 0xfe
-
-#define MTK_PHY_RG_LPI_PCS_DSP_CTRL_REG120 0x120
-#define MTK_PHY_LPI_SIG_EN_LO_THRESH1000_MASK GENMASK(12, 8)
-#define MTK_PHY_LPI_SIG_EN_HI_THRESH1000_MASK GENMASK(4, 0)
-
-#define MTK_PHY_RG_LPI_PCS_DSP_CTRL_REG122 0x122
-#define MTK_PHY_LPI_NORM_MSE_HI_THRESH1000_MASK GENMASK(7, 0)
-
-#define MTK_PHY_RG_TESTMUX_ADC_CTRL 0x144
-#define MTK_PHY_RG_TXEN_DIG_MASK GENMASK(5, 5)
-
-#define MTK_PHY_RG_CR_TX_AMP_OFFSET_A_B 0x172
-#define MTK_PHY_CR_TX_AMP_OFFSET_A_MASK GENMASK(13, 8)
-#define MTK_PHY_CR_TX_AMP_OFFSET_B_MASK GENMASK(6, 0)
-
-#define MTK_PHY_RG_CR_TX_AMP_OFFSET_C_D 0x173
-#define MTK_PHY_CR_TX_AMP_OFFSET_C_MASK GENMASK(13, 8)
-#define MTK_PHY_CR_TX_AMP_OFFSET_D_MASK GENMASK(6, 0)
-
-#define MTK_PHY_RG_AD_CAL_COMP 0x17a
-#define MTK_PHY_AD_CAL_COMP_OUT_SHIFT (8)
-
-#define MTK_PHY_RG_AD_CAL_CLK 0x17b
-#define MTK_PHY_DA_CAL_CLK BIT(0)
-
-#define MTK_PHY_RG_AD_CALIN 0x17c
-#define MTK_PHY_DA_CALIN_FLAG BIT(0)
-
-#define MTK_PHY_RG_DASN_DAC_IN0_A 0x17d
-#define MTK_PHY_DASN_DAC_IN0_A_MASK GENMASK(9, 0)
-
-#define MTK_PHY_RG_DASN_DAC_IN0_B 0x17e
-#define MTK_PHY_DASN_DAC_IN0_B_MASK GENMASK(9, 0)
-
-#define MTK_PHY_RG_DASN_DAC_IN0_C 0x17f
-#define MTK_PHY_DASN_DAC_IN0_C_MASK GENMASK(9, 0)
-
-#define MTK_PHY_RG_DASN_DAC_IN0_D 0x180
-#define MTK_PHY_DASN_DAC_IN0_D_MASK GENMASK(9, 0)
-
-#define MTK_PHY_RG_DASN_DAC_IN1_A 0x181
-#define MTK_PHY_DASN_DAC_IN1_A_MASK GENMASK(9, 0)
-
-#define MTK_PHY_RG_DASN_DAC_IN1_B 0x182
-#define MTK_PHY_DASN_DAC_IN1_B_MASK GENMASK(9, 0)
-
-#define MTK_PHY_RG_DASN_DAC_IN1_C 0x183
-#define MTK_PHY_DASN_DAC_IN1_C_MASK GENMASK(9, 0)
-
-#define MTK_PHY_RG_DASN_DAC_IN1_D 0x184
-#define MTK_PHY_DASN_DAC_IN1_D_MASK GENMASK(9, 0)
-
-#define MTK_PHY_RG_DEV1E_REG19b 0x19b
-#define MTK_PHY_BYPASS_DSP_LPI_READY BIT(8)
-
-#define MTK_PHY_RG_LP_IIR2_K1_L 0x22a
-#define MTK_PHY_RG_LP_IIR2_K1_U 0x22b
-#define MTK_PHY_RG_LP_IIR2_K2_L 0x22c
-#define MTK_PHY_RG_LP_IIR2_K2_U 0x22d
-#define MTK_PHY_RG_LP_IIR2_K3_L 0x22e
-#define MTK_PHY_RG_LP_IIR2_K3_U 0x22f
-#define MTK_PHY_RG_LP_IIR2_K4_L 0x230
-#define MTK_PHY_RG_LP_IIR2_K4_U 0x231
-#define MTK_PHY_RG_LP_IIR2_K5_L 0x232
-#define MTK_PHY_RG_LP_IIR2_K5_U 0x233
-
-#define MTK_PHY_RG_DEV1E_REG234 0x234
-#define MTK_PHY_TR_OPEN_LOOP_EN_MASK GENMASK(0, 0)
-#define MTK_PHY_LPF_X_AVERAGE_MASK GENMASK(7, 4)
-#define MTK_PHY_TR_LP_IIR_EEE_EN BIT(12)
-
-#define MTK_PHY_RG_LPF_CNT_VAL 0x235
-
-#define MTK_PHY_RG_DEV1E_REG238 0x238
-#define MTK_PHY_LPI_SLV_SEND_TX_TIMER_MASK GENMASK(8, 0)
-#define MTK_PHY_LPI_SLV_SEND_TX_EN BIT(12)
-
-#define MTK_PHY_RG_DEV1E_REG239 0x239
-#define MTK_PHY_LPI_SEND_LOC_TIMER_MASK GENMASK(8, 0)
-#define MTK_PHY_LPI_TXPCS_LOC_RCV BIT(12)
-
-#define MTK_PHY_RG_DEV1E_REG27C 0x27c
-#define MTK_PHY_VGASTATE_FFE_THR_ST1_MASK GENMASK(12, 8)
-#define MTK_PHY_RG_DEV1E_REG27D 0x27d
-#define MTK_PHY_VGASTATE_FFE_THR_ST2_MASK GENMASK(4, 0)
-
-#define MTK_PHY_RG_DEV1E_REG2C7 0x2c7
-#define MTK_PHY_MAX_GAIN_MASK GENMASK(4, 0)
-#define MTK_PHY_MIN_GAIN_MASK GENMASK(12, 8)
-
-#define MTK_PHY_RG_DEV1E_REG2D1 0x2d1
-#define MTK_PHY_VCO_SLICER_THRESH_BITS_HIGH_EEE_MASK GENMASK(7, 0)
-#define MTK_PHY_LPI_SKIP_SD_SLV_TR BIT(8)
-#define MTK_PHY_LPI_TR_READY BIT(9)
-#define MTK_PHY_LPI_VCO_EEE_STG0_EN BIT(10)
-
-#define MTK_PHY_RG_DEV1E_REG323 0x323
-#define MTK_PHY_EEE_WAKE_MAS_INT_DC BIT(0)
-#define MTK_PHY_EEE_WAKE_SLV_INT_DC BIT(4)
-
-#define MTK_PHY_RG_DEV1E_REG324 0x324
-#define MTK_PHY_SMI_DETCNT_MAX_MASK GENMASK(5, 0)
-#define MTK_PHY_SMI_DET_MAX_EN BIT(8)
-
-#define MTK_PHY_RG_DEV1E_REG326 0x326
-#define MTK_PHY_LPI_MODE_SD_ON BIT(0)
-#define MTK_PHY_RESET_RANDUPD_CNT BIT(1)
-#define MTK_PHY_TREC_UPDATE_ENAB_CLR BIT(2)
-#define MTK_PHY_LPI_QUIT_WAIT_DFE_SIG_DET_OFF BIT(4)
-#define MTK_PHY_TR_READY_SKIP_AFE_WAKEUP BIT(5)
-
-#define MTK_PHY_LDO_PUMP_EN_PAIRAB 0x502
-#define MTK_PHY_LDO_PUMP_EN_PAIRCD 0x503
-
-#define MTK_PHY_DA_TX_R50_PAIR_A 0x53d
-#define MTK_PHY_DA_TX_R50_PAIR_B 0x53e
-#define MTK_PHY_DA_TX_R50_PAIR_C 0x53f
-#define MTK_PHY_DA_TX_R50_PAIR_D 0x540
-
-/* Registers on MDIO_MMD_VEND2 */
-#define MTK_PHY_LED0_ON_CTRL 0x24
-#define MTK_PHY_LED0_ON_MASK GENMASK(6, 0)
-#define MTK_PHY_LED0_ON_LINK1000 BIT(0)
-#define MTK_PHY_LED0_ON_LINK100 BIT(1)
-#define MTK_PHY_LED0_ON_LINK10 BIT(2)
-#define MTK_PHY_LED0_ON_LINKDOWN BIT(3)
-#define MTK_PHY_LED0_ON_FDX BIT(4) /* Full duplex */
-#define MTK_PHY_LED0_ON_HDX BIT(5) /* Half duplex */
-#define MTK_PHY_LED0_FORCE_ON BIT(6)
-#define MTK_PHY_LED0_POLARITY BIT(14)
-#define MTK_PHY_LED0_ENABLE BIT(15)
-
-#define MTK_PHY_LED0_BLINK_CTRL 0x25
-#define MTK_PHY_LED0_1000TX BIT(0)
-#define MTK_PHY_LED0_1000RX BIT(1)
-#define MTK_PHY_LED0_100TX BIT(2)
-#define MTK_PHY_LED0_100RX BIT(3)
-#define MTK_PHY_LED0_10TX BIT(4)
-#define MTK_PHY_LED0_10RX BIT(5)
-#define MTK_PHY_LED0_COLLISION BIT(6)
-#define MTK_PHY_LED0_RX_CRC_ERR BIT(7)
-#define MTK_PHY_LED0_RX_IDLE_ERR BIT(8)
-#define MTK_PHY_LED0_FORCE_BLINK BIT(9)
-
-#define MTK_PHY_LED1_ON_CTRL 0x26
-#define MTK_PHY_LED1_ON_MASK GENMASK(6, 0)
-#define MTK_PHY_LED1_ON_LINK1000 BIT(0)
-#define MTK_PHY_LED1_ON_LINK100 BIT(1)
-#define MTK_PHY_LED1_ON_LINK10 BIT(2)
-#define MTK_PHY_LED1_ON_LINKDOWN BIT(3)
-#define MTK_PHY_LED1_ON_FDX BIT(4) /* Full duplex */
-#define MTK_PHY_LED1_ON_HDX BIT(5) /* Half duplex */
-#define MTK_PHY_LED1_FORCE_ON BIT(6)
-#define MTK_PHY_LED1_POLARITY BIT(14)
-#define MTK_PHY_LED1_ENABLE BIT(15)
-
-#define MTK_PHY_LED1_BLINK_CTRL 0x27
-#define MTK_PHY_LED1_1000TX BIT(0)
-#define MTK_PHY_LED1_1000RX BIT(1)
-#define MTK_PHY_LED1_100TX BIT(2)
-#define MTK_PHY_LED1_100RX BIT(3)
-#define MTK_PHY_LED1_10TX BIT(4)
-#define MTK_PHY_LED1_10RX BIT(5)
-#define MTK_PHY_LED1_COLLISION BIT(6)
-#define MTK_PHY_LED1_RX_CRC_ERR BIT(7)
-#define MTK_PHY_LED1_RX_IDLE_ERR BIT(8)
-#define MTK_PHY_LED1_FORCE_BLINK BIT(9)
-
-#define MTK_PHY_RG_BG_RASEL 0x115
-#define MTK_PHY_RG_BG_RASEL_MASK GENMASK(2, 0)
-
-/* These macro privides efuse parsing for internal phy. */
-#define EFS_DA_TX_I2MPB_A(x) (((x) >> 0) & GENMASK(5, 0))
-#define EFS_DA_TX_I2MPB_B(x) (((x) >> 6) & GENMASK(5, 0))
-#define EFS_DA_TX_I2MPB_C(x) (((x) >> 12) & GENMASK(5, 0))
-#define EFS_DA_TX_I2MPB_D(x) (((x) >> 18) & GENMASK(5, 0))
-#define EFS_DA_TX_AMP_OFFSET_A(x) (((x) >> 24) & GENMASK(5, 0))
-
-#define EFS_DA_TX_AMP_OFFSET_B(x) (((x) >> 0) & GENMASK(5, 0))
-#define EFS_DA_TX_AMP_OFFSET_C(x) (((x) >> 6) & GENMASK(5, 0))
-#define EFS_DA_TX_AMP_OFFSET_D(x) (((x) >> 12) & GENMASK(5, 0))
-#define EFS_DA_TX_R50_A(x) (((x) >> 18) & GENMASK(5, 0))
-#define EFS_DA_TX_R50_B(x) (((x) >> 24) & GENMASK(5, 0))
-
-#define EFS_DA_TX_R50_C(x) (((x) >> 0) & GENMASK(5, 0))
-#define EFS_DA_TX_R50_D(x) (((x) >> 6) & GENMASK(5, 0))
-
-#define EFS_RG_BG_RASEL(x) (((x) >> 4) & GENMASK(2, 0))
-#define EFS_RG_REXT_TRIM(x) (((x) >> 7) & GENMASK(5, 0))
-
-enum {
- NO_PAIR,
- PAIR_A,
- PAIR_B,
- PAIR_C,
- PAIR_D,
-};
-
-enum {
- GPHY_PORT0,
- GPHY_PORT1,
- GPHY_PORT2,
- GPHY_PORT3,
-};
-
-enum calibration_mode {
- EFUSE_K,
- SW_K
-};
-
-enum CAL_ITEM {
- REXT,
- TX_OFFSET,
- TX_AMP,
- TX_R50,
- TX_VCM
-};
-
-enum CAL_MODE {
- EFUSE_M,
- SW_M
-};
-
-struct mtk_socphy_shared_priv {
- u32 boottrap;
-};
-
-static int mtk_socphy_read_page(struct phy_device *phydev)
-{
- return __phy_read(phydev, MTK_EXT_PAGE_ACCESS);
-}
-
-static int mtk_socphy_write_page(struct phy_device *phydev, int page)
-{
- return __phy_write(phydev, MTK_EXT_PAGE_ACCESS, page);
-}
-
-/* One calibration cycle consists of:
- * 1.Set DA_CALIN_FLAG high to start calibration. Keep it high
- * until AD_CAL_COMP is ready to output calibration result.
- * 2.Wait until DA_CAL_CLK is available.
- * 3.Fetch AD_CAL_COMP_OUT.
- */
-static int cal_cycle(struct phy_device *phydev, int devad,
- u32 regnum, u16 mask, u16 cal_val)
-{
- int reg_val;
- int ret;
-
- phy_modify_mmd(phydev, devad, regnum,
- mask, cal_val);
- phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_AD_CALIN,
- MTK_PHY_DA_CALIN_FLAG);
-
- ret = phy_read_mmd_poll_timeout(phydev, MDIO_MMD_VEND1,
- MTK_PHY_RG_AD_CAL_CLK, reg_val,
- reg_val & MTK_PHY_DA_CAL_CLK, 500,
- ANALOG_INTERNAL_OPERATION_MAX_US, false);
- if (ret) {
- phydev_err(phydev, "Calibration cycle timeout\n");
- return ret;
- }
-
- phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_AD_CALIN,
- MTK_PHY_DA_CALIN_FLAG);
- ret = phy_read_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_AD_CAL_COMP) >>
- MTK_PHY_AD_CAL_COMP_OUT_SHIFT;
- phydev_dbg(phydev, "cal_val: 0x%x, ret: %d\n", cal_val, ret);
-
- return ret;
-}
-
-static int rext_fill_result(struct phy_device *phydev, u16 *buf)
-{
- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG5,
- MTK_PHY_RG_REXT_TRIM_MASK, buf[0] << 8);
- phy_modify_mmd(phydev, MDIO_MMD_VEND2, MTK_PHY_RG_BG_RASEL,
- MTK_PHY_RG_BG_RASEL_MASK, buf[1]);
-
- return 0;
-}
-
-static int rext_cal_efuse(struct phy_device *phydev, u32 *buf)
-{
- u16 rext_cal_val[2];
-
- rext_cal_val[0] = EFS_RG_REXT_TRIM(buf[3]);
- rext_cal_val[1] = EFS_RG_BG_RASEL(buf[3]);
- rext_fill_result(phydev, rext_cal_val);
-
- return 0;
-}
-
-static int tx_offset_fill_result(struct phy_device *phydev, u16 *buf)
-{
- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_CR_TX_AMP_OFFSET_A_B,
- MTK_PHY_CR_TX_AMP_OFFSET_A_MASK, buf[0] << 8);
- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_CR_TX_AMP_OFFSET_A_B,
- MTK_PHY_CR_TX_AMP_OFFSET_B_MASK, buf[1]);
- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_CR_TX_AMP_OFFSET_C_D,
- MTK_PHY_CR_TX_AMP_OFFSET_C_MASK, buf[2] << 8);
- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_CR_TX_AMP_OFFSET_C_D,
- MTK_PHY_CR_TX_AMP_OFFSET_D_MASK, buf[3]);
-
- return 0;
-}
-
-static int tx_offset_cal_efuse(struct phy_device *phydev, u32 *buf)
-{
- u16 tx_offset_cal_val[4];
-
- tx_offset_cal_val[0] = EFS_DA_TX_AMP_OFFSET_A(buf[0]);
- tx_offset_cal_val[1] = EFS_DA_TX_AMP_OFFSET_B(buf[1]);
- tx_offset_cal_val[2] = EFS_DA_TX_AMP_OFFSET_C(buf[1]);
- tx_offset_cal_val[3] = EFS_DA_TX_AMP_OFFSET_D(buf[1]);
-
- tx_offset_fill_result(phydev, tx_offset_cal_val);
-
- return 0;
-}
-
-static int tx_amp_fill_result(struct phy_device *phydev, u16 *buf)
-{
- int i;
- int bias[16] = {};
- const int vals_9461[16] = { 7, 1, 4, 7,
- 7, 1, 4, 7,
- 7, 1, 4, 7,
- 7, 1, 4, 7 };
- const int vals_9481[16] = { 10, 6, 6, 10,
- 10, 6, 6, 10,
- 10, 6, 6, 10,
- 10, 6, 6, 10 };
- switch (phydev->drv->phy_id) {
- case MTK_GPHY_ID_MT7981:
- /* We add some calibration to efuse values
- * due to board level influence.
- * GBE: +7, TBT: +1, HBT: +4, TST: +7
- */
- memcpy(bias, (const void *)vals_9461, sizeof(bias));
- break;
- case MTK_GPHY_ID_MT7988:
- memcpy(bias, (const void *)vals_9481, sizeof(bias));
- break;
- }
-
- /* Prevent overflow */
- for (i = 0; i < 12; i++) {
- if (buf[i >> 2] + bias[i] > 63) {
- buf[i >> 2] = 63;
- bias[i] = 0;
- }
- }
-
- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TXVLD_DA_RG,
- MTK_PHY_DA_TX_I2MPB_A_GBE_MASK, (buf[0] + bias[0]) << 10);
- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TXVLD_DA_RG,
- MTK_PHY_DA_TX_I2MPB_A_TBT_MASK, buf[0] + bias[1]);
- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_A2,
- MTK_PHY_DA_TX_I2MPB_A_HBT_MASK, (buf[0] + bias[2]) << 10);
- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_A2,
- MTK_PHY_DA_TX_I2MPB_A_TST_MASK, buf[0] + bias[3]);
-
- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_B1,
- MTK_PHY_DA_TX_I2MPB_B_GBE_MASK, (buf[1] + bias[4]) << 8);
- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_B1,
- MTK_PHY_DA_TX_I2MPB_B_TBT_MASK, buf[1] + bias[5]);
- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_B2,
- MTK_PHY_DA_TX_I2MPB_B_HBT_MASK, (buf[1] + bias[6]) << 8);
- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_B2,
- MTK_PHY_DA_TX_I2MPB_B_TST_MASK, buf[1] + bias[7]);
-
- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_C1,
- MTK_PHY_DA_TX_I2MPB_C_GBE_MASK, (buf[2] + bias[8]) << 8);
- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_C1,
- MTK_PHY_DA_TX_I2MPB_C_TBT_MASK, buf[2] + bias[9]);
- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_C2,
- MTK_PHY_DA_TX_I2MPB_C_HBT_MASK, (buf[2] + bias[10]) << 8);
- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_C2,
- MTK_PHY_DA_TX_I2MPB_C_TST_MASK, buf[2] + bias[11]);
-
- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_D1,
- MTK_PHY_DA_TX_I2MPB_D_GBE_MASK, (buf[3] + bias[12]) << 8);
- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_D1,
- MTK_PHY_DA_TX_I2MPB_D_TBT_MASK, buf[3] + bias[13]);
- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_D2,
- MTK_PHY_DA_TX_I2MPB_D_HBT_MASK, (buf[3] + bias[14]) << 8);
- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_D2,
- MTK_PHY_DA_TX_I2MPB_D_TST_MASK, buf[3] + bias[15]);
-
- return 0;
-}
-
-static int tx_amp_cal_efuse(struct phy_device *phydev, u32 *buf)
-{
- u16 tx_amp_cal_val[4];
-
- tx_amp_cal_val[0] = EFS_DA_TX_I2MPB_A(buf[0]);
- tx_amp_cal_val[1] = EFS_DA_TX_I2MPB_B(buf[0]);
- tx_amp_cal_val[2] = EFS_DA_TX_I2MPB_C(buf[0]);
- tx_amp_cal_val[3] = EFS_DA_TX_I2MPB_D(buf[0]);
- tx_amp_fill_result(phydev, tx_amp_cal_val);
-
- return 0;
-}
-
-static int tx_r50_fill_result(struct phy_device *phydev, u16 tx_r50_cal_val,
- u8 txg_calen_x)
-{
- int bias = 0;
- u16 reg, val;
-
- if (phydev->drv->phy_id == MTK_GPHY_ID_MT7988)
- bias = -2;
-
- val = clamp_val(bias + tx_r50_cal_val, 0, 63);
-
- switch (txg_calen_x) {
- case PAIR_A:
- reg = MTK_PHY_DA_TX_R50_PAIR_A;
- break;
- case PAIR_B:
- reg = MTK_PHY_DA_TX_R50_PAIR_B;
- break;
- case PAIR_C:
- reg = MTK_PHY_DA_TX_R50_PAIR_C;
- break;
- case PAIR_D:
- reg = MTK_PHY_DA_TX_R50_PAIR_D;
- break;
- default:
- return -EINVAL;
- }
-
- phy_write_mmd(phydev, MDIO_MMD_VEND1, reg, val | val << 8);
-
- return 0;
-}
-
-static int tx_r50_cal_efuse(struct phy_device *phydev, u32 *buf,
- u8 txg_calen_x)
-{
- u16 tx_r50_cal_val;
-
- switch (txg_calen_x) {
- case PAIR_A:
- tx_r50_cal_val = EFS_DA_TX_R50_A(buf[1]);
- break;
- case PAIR_B:
- tx_r50_cal_val = EFS_DA_TX_R50_B(buf[1]);
- break;
- case PAIR_C:
- tx_r50_cal_val = EFS_DA_TX_R50_C(buf[2]);
- break;
- case PAIR_D:
- tx_r50_cal_val = EFS_DA_TX_R50_D(buf[2]);
- break;
- default:
- return -EINVAL;
- }
- tx_r50_fill_result(phydev, tx_r50_cal_val, txg_calen_x);
-
- return 0;
-}
-
-static int tx_vcm_cal_sw(struct phy_device *phydev, u8 rg_txreserve_x)
-{
- u8 lower_idx, upper_idx, txreserve_val;
- u8 lower_ret, upper_ret;
- int ret;
-
- phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG0,
- MTK_PHY_RG_ANA_CALEN);
- phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG0,
- MTK_PHY_RG_CAL_CKINV);
- phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG1,
- MTK_PHY_RG_TXVOS_CALEN);
-
- switch (rg_txreserve_x) {
- case PAIR_A:
- phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
- MTK_PHY_RG_DASN_DAC_IN0_A,
- MTK_PHY_DASN_DAC_IN0_A_MASK);
- phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
- MTK_PHY_RG_DASN_DAC_IN1_A,
- MTK_PHY_DASN_DAC_IN1_A_MASK);
- phy_set_bits_mmd(phydev, MDIO_MMD_VEND1,
- MTK_PHY_RG_ANA_CAL_RG0,
- MTK_PHY_RG_ZCALEN_A);
- break;
- case PAIR_B:
- phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
- MTK_PHY_RG_DASN_DAC_IN0_B,
- MTK_PHY_DASN_DAC_IN0_B_MASK);
- phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
- MTK_PHY_RG_DASN_DAC_IN1_B,
- MTK_PHY_DASN_DAC_IN1_B_MASK);
- phy_set_bits_mmd(phydev, MDIO_MMD_VEND1,
- MTK_PHY_RG_ANA_CAL_RG1,
- MTK_PHY_RG_ZCALEN_B);
- break;
- case PAIR_C:
- phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
- MTK_PHY_RG_DASN_DAC_IN0_C,
- MTK_PHY_DASN_DAC_IN0_C_MASK);
- phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
- MTK_PHY_RG_DASN_DAC_IN1_C,
- MTK_PHY_DASN_DAC_IN1_C_MASK);
- phy_set_bits_mmd(phydev, MDIO_MMD_VEND1,
- MTK_PHY_RG_ANA_CAL_RG1,
- MTK_PHY_RG_ZCALEN_C);
- break;
- case PAIR_D:
- phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
- MTK_PHY_RG_DASN_DAC_IN0_D,
- MTK_PHY_DASN_DAC_IN0_D_MASK);
- phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
- MTK_PHY_RG_DASN_DAC_IN1_D,
- MTK_PHY_DASN_DAC_IN1_D_MASK);
- phy_set_bits_mmd(phydev, MDIO_MMD_VEND1,
- MTK_PHY_RG_ANA_CAL_RG1,
- MTK_PHY_RG_ZCALEN_D);
- break;
- default:
- ret = -EINVAL;
- goto restore;
- }
-
- lower_idx = TXRESERVE_MIN;
- upper_idx = TXRESERVE_MAX;
-
- phydev_dbg(phydev, "Start TX-VCM SW cal.\n");
- while ((upper_idx - lower_idx) > 1) {
- txreserve_val = DIV_ROUND_CLOSEST(lower_idx + upper_idx, 2);
- ret = cal_cycle(phydev, MDIO_MMD_VEND1, MTK_PHY_RXADC_CTRL_RG9,
- MTK_PHY_DA_RX_PSBN_TBT_MASK |
- MTK_PHY_DA_RX_PSBN_HBT_MASK |
- MTK_PHY_DA_RX_PSBN_GBE_MASK |
- MTK_PHY_DA_RX_PSBN_LP_MASK,
- txreserve_val << 12 | txreserve_val << 8 |
- txreserve_val << 4 | txreserve_val);
- if (ret == 1) {
- upper_idx = txreserve_val;
- upper_ret = ret;
- } else if (ret == 0) {
- lower_idx = txreserve_val;
- lower_ret = ret;
- } else {
- goto restore;
- }
- }
-
- if (lower_idx == TXRESERVE_MIN) {
- lower_ret = cal_cycle(phydev, MDIO_MMD_VEND1,
- MTK_PHY_RXADC_CTRL_RG9,
- MTK_PHY_DA_RX_PSBN_TBT_MASK |
- MTK_PHY_DA_RX_PSBN_HBT_MASK |
- MTK_PHY_DA_RX_PSBN_GBE_MASK |
- MTK_PHY_DA_RX_PSBN_LP_MASK,
- lower_idx << 12 | lower_idx << 8 |
- lower_idx << 4 | lower_idx);
- ret = lower_ret;
- } else if (upper_idx == TXRESERVE_MAX) {
- upper_ret = cal_cycle(phydev, MDIO_MMD_VEND1,
- MTK_PHY_RXADC_CTRL_RG9,
- MTK_PHY_DA_RX_PSBN_TBT_MASK |
- MTK_PHY_DA_RX_PSBN_HBT_MASK |
- MTK_PHY_DA_RX_PSBN_GBE_MASK |
- MTK_PHY_DA_RX_PSBN_LP_MASK,
- upper_idx << 12 | upper_idx << 8 |
- upper_idx << 4 | upper_idx);
- ret = upper_ret;
- }
- if (ret < 0)
- goto restore;
-
- /* We calibrate TX-VCM in different logic. Check upper index and then
- * lower index. If this calibration is valid, apply lower index's result.
- */
- ret = upper_ret - lower_ret;
- if (ret == 1) {
- ret = 0;
- /* Make sure we use upper_idx in our calibration system */
- cal_cycle(phydev, MDIO_MMD_VEND1, MTK_PHY_RXADC_CTRL_RG9,
- MTK_PHY_DA_RX_PSBN_TBT_MASK |
- MTK_PHY_DA_RX_PSBN_HBT_MASK |
- MTK_PHY_DA_RX_PSBN_GBE_MASK |
- MTK_PHY_DA_RX_PSBN_LP_MASK,
- upper_idx << 12 | upper_idx << 8 |
- upper_idx << 4 | upper_idx);
- phydev_dbg(phydev, "TX-VCM SW cal result: 0x%x\n", upper_idx);
- } else if (lower_idx == TXRESERVE_MIN && upper_ret == 1 &&
- lower_ret == 1) {
- ret = 0;
- cal_cycle(phydev, MDIO_MMD_VEND1, MTK_PHY_RXADC_CTRL_RG9,
- MTK_PHY_DA_RX_PSBN_TBT_MASK |
- MTK_PHY_DA_RX_PSBN_HBT_MASK |
- MTK_PHY_DA_RX_PSBN_GBE_MASK |
- MTK_PHY_DA_RX_PSBN_LP_MASK,
- lower_idx << 12 | lower_idx << 8 |
- lower_idx << 4 | lower_idx);
- phydev_warn(phydev, "TX-VCM SW cal result at low margin 0x%x\n",
- lower_idx);
- } else if (upper_idx == TXRESERVE_MAX && upper_ret == 0 &&
- lower_ret == 0) {
- ret = 0;
- phydev_warn(phydev, "TX-VCM SW cal result at high margin 0x%x\n",
- upper_idx);
- } else {
- ret = -EINVAL;
- }
-
-restore:
- phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG0,
- MTK_PHY_RG_ANA_CALEN);
- phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG1,
- MTK_PHY_RG_TXVOS_CALEN);
- phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG0,
- MTK_PHY_RG_ZCALEN_A);
- phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG1,
- MTK_PHY_RG_ZCALEN_B | MTK_PHY_RG_ZCALEN_C |
- MTK_PHY_RG_ZCALEN_D);
-
- return ret;
-}
-
-static void mt798x_phy_common_finetune(struct phy_device *phydev)
-{
- phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_52B5);
- /* EnabRandUpdTrig = 1 */
- __phy_write(phydev, 0x11, 0x2f00);
- __phy_write(phydev, 0x12, 0xe);
- __phy_write(phydev, 0x10, 0x8fb0);
-
- /* NormMseLoThresh = 85 */
- __phy_write(phydev, 0x11, 0x55a0);
- __phy_write(phydev, 0x12, 0x0);
- __phy_write(phydev, 0x10, 0x83aa);
-
- /* TrFreeze = 0 */
- __phy_write(phydev, 0x11, 0x0);
- __phy_write(phydev, 0x12, 0x0);
- __phy_write(phydev, 0x10, 0x9686);
-
- /* SSTrKp1000Slv = 5 */
- __phy_write(phydev, 0x11, 0xbaef);
- __phy_write(phydev, 0x12, 0x2e);
- __phy_write(phydev, 0x10, 0x968c);
-
- /* MrvlTrFix100Kp = 3, MrvlTrFix100Kf = 2,
- * MrvlTrFix1000Kp = 3, MrvlTrFix1000Kf = 2
- */
- __phy_write(phydev, 0x11, 0xd10a);
- __phy_write(phydev, 0x12, 0x34);
- __phy_write(phydev, 0x10, 0x8f82);
-
- /* VcoSlicerThreshBitsHigh */
- __phy_write(phydev, 0x11, 0x5555);
- __phy_write(phydev, 0x12, 0x55);
- __phy_write(phydev, 0x10, 0x8ec0);
- phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0);
-
- /* TR_OPEN_LOOP_EN = 1, lpf_x_average = 9*/
- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG234,
- MTK_PHY_TR_OPEN_LOOP_EN_MASK | MTK_PHY_LPF_X_AVERAGE_MASK,
- BIT(0) | FIELD_PREP(MTK_PHY_LPF_X_AVERAGE_MASK, 0x9));
-
- /* rg_tr_lpf_cnt_val = 512 */
- phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LPF_CNT_VAL, 0x200);
-
- /* IIR2 related */
- phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K1_L, 0x82);
- phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K1_U, 0x0);
- phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K2_L, 0x103);
- phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K2_U, 0x0);
- phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K3_L, 0x82);
- phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K3_U, 0x0);
- phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K4_L, 0xd177);
- phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K4_U, 0x3);
- phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K5_L, 0x2c82);
- phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K5_U, 0xe);
-
- /* FFE peaking */
- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG27C,
- MTK_PHY_VGASTATE_FFE_THR_ST1_MASK, 0x1b << 8);
- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG27D,
- MTK_PHY_VGASTATE_FFE_THR_ST2_MASK, 0x1e);
-
- /* Disable LDO pump */
- phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_LDO_PUMP_EN_PAIRAB, 0x0);
- phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_LDO_PUMP_EN_PAIRCD, 0x0);
- /* Adjust LDO output voltage */
- phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_LDO_OUTPUT_V, 0x2222);
-}
-
-static void mt7981_phy_finetune(struct phy_device *phydev)
-{
- u16 val[8] = { 0x01ce, 0x01c1,
- 0x020f, 0x0202,
- 0x03d0, 0x03c0,
- 0x0013, 0x0005 };
- int i, k;
-
- /* 100M eye finetune:
- * Keep middle level of TX MLT3 shapper as default.
- * Only change TX MLT3 overshoot level here.
- */
- for (k = 0, i = 1; i < 12; i++) {
- if (i % 3 == 0)
- continue;
- phy_write_mmd(phydev, MDIO_MMD_VEND1, i, val[k++]);
- }
-
- phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_52B5);
- /* SlvDSPreadyTime = 24, MasDSPreadyTime = 24 */
- __phy_write(phydev, 0x11, 0xc71);
- __phy_write(phydev, 0x12, 0xc);
- __phy_write(phydev, 0x10, 0x8fae);
-
- /* ResetSyncOffset = 6 */
- __phy_write(phydev, 0x11, 0x600);
- __phy_write(phydev, 0x12, 0x0);
- __phy_write(phydev, 0x10, 0x8fc0);
-
- /* VgaDecRate = 1 */
- __phy_write(phydev, 0x11, 0x4c2a);
- __phy_write(phydev, 0x12, 0x3e);
- __phy_write(phydev, 0x10, 0x8fa4);
-
- /* FfeUpdGainForce = 4 */
- __phy_write(phydev, 0x11, 0x240);
- __phy_write(phydev, 0x12, 0x0);
- __phy_write(phydev, 0x10, 0x9680);
-
- phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0);
-}
-
-static void mt7988_phy_finetune(struct phy_device *phydev)
-{
- u16 val[12] = { 0x0187, 0x01cd, 0x01c8, 0x0182,
- 0x020d, 0x0206, 0x0384, 0x03d0,
- 0x03c6, 0x030a, 0x0011, 0x0005 };
- int i;
-
- /* Set default MLT3 shaper first */
- for (i = 0; i < 12; i++)
- phy_write_mmd(phydev, MDIO_MMD_VEND1, i, val[i]);
-
- /* TCT finetune */
- phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_TX_FILTER, 0x5);
-
- /* Disable TX power saving */
- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RXADC_CTRL_RG7,
- MTK_PHY_DA_AD_BUF_BIAS_LP_MASK, 0x3 << 8);
-
- phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_52B5);
-
- /* SlvDSPreadyTime = 24, MasDSPreadyTime = 12 */
- __phy_write(phydev, 0x11, 0x671);
- __phy_write(phydev, 0x12, 0xc);
- __phy_write(phydev, 0x10, 0x8fae);
-
- /* ResetSyncOffset = 5 */
- __phy_write(phydev, 0x11, 0x500);
- __phy_write(phydev, 0x12, 0x0);
- __phy_write(phydev, 0x10, 0x8fc0);
-
- /* VgaDecRate is 1 at default on mt7988 */
-
- phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0);
-
- phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_2A30);
- /* TxClkOffset = 2 */
- __phy_modify(phydev, MTK_PHY_ANARG_RG, MTK_PHY_TCLKOFFSET_MASK,
- FIELD_PREP(MTK_PHY_TCLKOFFSET_MASK, 0x2));
- phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0);
-}
-
-static void mt798x_phy_eee(struct phy_device *phydev)
-{
- phy_modify_mmd(phydev, MDIO_MMD_VEND1,
- MTK_PHY_RG_LPI_PCS_DSP_CTRL_REG120,
- MTK_PHY_LPI_SIG_EN_LO_THRESH1000_MASK |
- MTK_PHY_LPI_SIG_EN_HI_THRESH1000_MASK,
- FIELD_PREP(MTK_PHY_LPI_SIG_EN_LO_THRESH1000_MASK, 0x0) |
- FIELD_PREP(MTK_PHY_LPI_SIG_EN_HI_THRESH1000_MASK, 0x14));
-
- phy_modify_mmd(phydev, MDIO_MMD_VEND1,
- MTK_PHY_RG_LPI_PCS_DSP_CTRL_REG122,
- MTK_PHY_LPI_NORM_MSE_HI_THRESH1000_MASK,
- FIELD_PREP(MTK_PHY_LPI_NORM_MSE_HI_THRESH1000_MASK,
- 0xff));
-
- phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
- MTK_PHY_RG_TESTMUX_ADC_CTRL,
- MTK_PHY_RG_TXEN_DIG_MASK);
-
- phy_set_bits_mmd(phydev, MDIO_MMD_VEND1,
- MTK_PHY_RG_DEV1E_REG19b, MTK_PHY_BYPASS_DSP_LPI_READY);
-
- phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
- MTK_PHY_RG_DEV1E_REG234, MTK_PHY_TR_LP_IIR_EEE_EN);
-
- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG238,
- MTK_PHY_LPI_SLV_SEND_TX_TIMER_MASK |
- MTK_PHY_LPI_SLV_SEND_TX_EN,
- FIELD_PREP(MTK_PHY_LPI_SLV_SEND_TX_TIMER_MASK, 0x120));
-
- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG239,
- MTK_PHY_LPI_SEND_LOC_TIMER_MASK |
- MTK_PHY_LPI_TXPCS_LOC_RCV,
- FIELD_PREP(MTK_PHY_LPI_SEND_LOC_TIMER_MASK, 0x117));
-
- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG2C7,
- MTK_PHY_MAX_GAIN_MASK | MTK_PHY_MIN_GAIN_MASK,
- FIELD_PREP(MTK_PHY_MAX_GAIN_MASK, 0x8) |
- FIELD_PREP(MTK_PHY_MIN_GAIN_MASK, 0x13));
-
- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG2D1,
- MTK_PHY_VCO_SLICER_THRESH_BITS_HIGH_EEE_MASK,
- FIELD_PREP(MTK_PHY_VCO_SLICER_THRESH_BITS_HIGH_EEE_MASK,
- 0x33) |
- MTK_PHY_LPI_SKIP_SD_SLV_TR | MTK_PHY_LPI_TR_READY |
- MTK_PHY_LPI_VCO_EEE_STG0_EN);
-
- phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG323,
- MTK_PHY_EEE_WAKE_MAS_INT_DC |
- MTK_PHY_EEE_WAKE_SLV_INT_DC);
-
- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG324,
- MTK_PHY_SMI_DETCNT_MAX_MASK,
- FIELD_PREP(MTK_PHY_SMI_DETCNT_MAX_MASK, 0x3f) |
- MTK_PHY_SMI_DET_MAX_EN);
-
- phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG326,
- MTK_PHY_LPI_MODE_SD_ON | MTK_PHY_RESET_RANDUPD_CNT |
- MTK_PHY_TREC_UPDATE_ENAB_CLR |
- MTK_PHY_LPI_QUIT_WAIT_DFE_SIG_DET_OFF |
- MTK_PHY_TR_READY_SKIP_AFE_WAKEUP);
-
- phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_52B5);
- /* Regsigdet_sel_1000 = 0 */
- __phy_write(phydev, 0x11, 0xb);
- __phy_write(phydev, 0x12, 0x0);
- __phy_write(phydev, 0x10, 0x9690);
-
- /* REG_EEE_st2TrKf1000 = 3 */
- __phy_write(phydev, 0x11, 0x114f);
- __phy_write(phydev, 0x12, 0x2);
- __phy_write(phydev, 0x10, 0x969a);
-
- /* RegEEE_slv_wake_tr_timer_tar = 6, RegEEE_slv_remtx_timer_tar = 20 */
- __phy_write(phydev, 0x11, 0x3028);
- __phy_write(phydev, 0x12, 0x0);
- __phy_write(phydev, 0x10, 0x969e);
-
- /* RegEEE_slv_wake_int_timer_tar = 8 */
- __phy_write(phydev, 0x11, 0x5010);
- __phy_write(phydev, 0x12, 0x0);
- __phy_write(phydev, 0x10, 0x96a0);
-
- /* RegEEE_trfreeze_timer2 = 586 */
- __phy_write(phydev, 0x11, 0x24a);
- __phy_write(phydev, 0x12, 0x0);
- __phy_write(phydev, 0x10, 0x96a8);
-
- /* RegEEE100Stg1_tar = 16 */
- __phy_write(phydev, 0x11, 0x3210);
- __phy_write(phydev, 0x12, 0x0);
- __phy_write(phydev, 0x10, 0x96b8);
-
- /* REGEEE_wake_slv_tr_wait_dfesigdet_en = 1 */
- __phy_write(phydev, 0x11, 0x1463);
- __phy_write(phydev, 0x12, 0x0);
- __phy_write(phydev, 0x10, 0x96ca);
-
- /* DfeTailEnableVgaThresh1000 = 27 */
- __phy_write(phydev, 0x11, 0x36);
- __phy_write(phydev, 0x12, 0x0);
- __phy_write(phydev, 0x10, 0x8f80);
- phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0);
-
- phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_3);
- __phy_modify(phydev, MTK_PHY_LPI_REG_14, MTK_PHY_LPI_WAKE_TIMER_1000_MASK,
- FIELD_PREP(MTK_PHY_LPI_WAKE_TIMER_1000_MASK, 0x19c));
-
- __phy_modify(phydev, MTK_PHY_LPI_REG_1c, MTK_PHY_SMI_DET_ON_THRESH_MASK,
- FIELD_PREP(MTK_PHY_SMI_DET_ON_THRESH_MASK, 0xc));
- phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0);
-
- phy_modify_mmd(phydev, MDIO_MMD_VEND1,
- MTK_PHY_RG_LPI_PCS_DSP_CTRL_REG122,
- MTK_PHY_LPI_NORM_MSE_HI_THRESH1000_MASK,
- FIELD_PREP(MTK_PHY_LPI_NORM_MSE_HI_THRESH1000_MASK, 0xff));
-}
-
-static int cal_sw(struct phy_device *phydev, enum CAL_ITEM cal_item,
- u8 start_pair, u8 end_pair)
-{
- u8 pair_n;
- int ret;
-
- for (pair_n = start_pair; pair_n <= end_pair; pair_n++) {
- /* TX_OFFSET & TX_AMP have no SW calibration. */
- switch (cal_item) {
- case TX_VCM:
- ret = tx_vcm_cal_sw(phydev, pair_n);
- break;
- default:
- return -EINVAL;
- }
- if (ret)
- return ret;
- }
- return 0;
-}
-
-static int cal_efuse(struct phy_device *phydev, enum CAL_ITEM cal_item,
- u8 start_pair, u8 end_pair, u32 *buf)
-{
- u8 pair_n;
- int ret;
-
- for (pair_n = start_pair; pair_n <= end_pair; pair_n++) {
- /* TX_VCM has no efuse calibration. */
- switch (cal_item) {
- case REXT:
- ret = rext_cal_efuse(phydev, buf);
- break;
- case TX_OFFSET:
- ret = tx_offset_cal_efuse(phydev, buf);
- break;
- case TX_AMP:
- ret = tx_amp_cal_efuse(phydev, buf);
- break;
- case TX_R50:
- ret = tx_r50_cal_efuse(phydev, buf, pair_n);
- break;
- default:
- return -EINVAL;
- }
- if (ret)
- return ret;
- }
-
- return 0;
-}
-
-static int start_cal(struct phy_device *phydev, enum CAL_ITEM cal_item,
- enum CAL_MODE cal_mode, u8 start_pair,
- u8 end_pair, u32 *buf)
-{
- int ret;
-
- switch (cal_mode) {
- case EFUSE_M:
- ret = cal_efuse(phydev, cal_item, start_pair,
- end_pair, buf);
- break;
- case SW_M:
- ret = cal_sw(phydev, cal_item, start_pair, end_pair);
- break;
- default:
- return -EINVAL;
- }
-
- if (ret) {
- phydev_err(phydev, "cal %d failed\n", cal_item);
- return -EIO;
- }
-
- return 0;
-}
-
-static int mt798x_phy_calibration(struct phy_device *phydev)
-{
- int ret = 0;
- u32 *buf;
- size_t len;
- struct nvmem_cell *cell;
-
- cell = nvmem_cell_get(&phydev->mdio.dev, "phy-cal-data");
- if (IS_ERR(cell)) {
- if (PTR_ERR(cell) == -EPROBE_DEFER)
- return PTR_ERR(cell);
- return 0;
- }
-
- buf = (u32 *)nvmem_cell_read(cell, &len);
- if (IS_ERR(buf))
- return PTR_ERR(buf);
- nvmem_cell_put(cell);
-
- if (!buf[0] || !buf[1] || !buf[2] || !buf[3] || len < 4 * sizeof(u32)) {
- phydev_err(phydev, "invalid efuse data\n");
- ret = -EINVAL;
- goto out;
- }
-
- ret = start_cal(phydev, REXT, EFUSE_M, NO_PAIR, NO_PAIR, buf);
- if (ret)
- goto out;
- ret = start_cal(phydev, TX_OFFSET, EFUSE_M, NO_PAIR, NO_PAIR, buf);
- if (ret)
- goto out;
- ret = start_cal(phydev, TX_AMP, EFUSE_M, NO_PAIR, NO_PAIR, buf);
- if (ret)
- goto out;
- ret = start_cal(phydev, TX_R50, EFUSE_M, PAIR_A, PAIR_D, buf);
- if (ret)
- goto out;
- ret = start_cal(phydev, TX_VCM, SW_M, PAIR_A, PAIR_A, buf);
- if (ret)
- goto out;
-
-out:
- kfree(buf);
- return ret;
-}
-
-static int mt798x_phy_config_init(struct phy_device *phydev)
-{
- switch (phydev->drv->phy_id) {
- case MTK_GPHY_ID_MT7981:
- mt7981_phy_finetune(phydev);
- break;
- case MTK_GPHY_ID_MT7988:
- mt7988_phy_finetune(phydev);
- break;
- }
-
- mt798x_phy_common_finetune(phydev);
- mt798x_phy_eee(phydev);
-
- return mt798x_phy_calibration(phydev);
-}
-
-static int mt7988_phy_setup_led(struct phy_device *phydev)
-{
- struct mtk_socphy_shared_priv *priv = phydev->shared->priv;
- int port = phydev->mdio.addr;
- u32 reg = priv->boottrap;
- struct pinctrl *pinctrl;
-
- phy_write_mmd(phydev, MDIO_MMD_VEND2, MTK_PHY_LED0_ON_CTRL,
- MTK_PHY_LED0_ENABLE | MTK_PHY_LED0_POLARITY |
- MTK_PHY_LED0_ON_LINK10 |
- MTK_PHY_LED0_ON_LINK100 |
- MTK_PHY_LED0_ON_LINK1000);
- phy_write_mmd(phydev, MDIO_MMD_VEND2, MTK_PHY_LED1_ON_CTRL,
- MTK_PHY_LED1_ENABLE | MTK_PHY_LED1_POLARITY |
- MTK_PHY_LED1_ON_LINK10 |
- MTK_PHY_LED1_ON_LINK100 |
- MTK_PHY_LED1_ON_LINK1000);
-
- if ((port == GPHY_PORT0 && reg & BIT(8)) ||
- (port == GPHY_PORT1 && reg & BIT(9)) ||
- (port == GPHY_PORT2 && reg & BIT(10)) ||
- (port == GPHY_PORT3 && reg & BIT(11))) {
- phy_clear_bits_mmd(phydev, MDIO_MMD_VEND2, MTK_PHY_LED0_ON_CTRL,
- MTK_PHY_LED0_POLARITY);
- phy_clear_bits_mmd(phydev, MDIO_MMD_VEND2, MTK_PHY_LED1_ON_CTRL,
- MTK_PHY_LED1_POLARITY);
- }
-
- phy_write_mmd(phydev, MDIO_MMD_VEND2, MTK_PHY_LED0_BLINK_CTRL,
- MTK_PHY_LED0_1000TX | MTK_PHY_LED0_1000RX |
- MTK_PHY_LED0_100TX | MTK_PHY_LED0_100RX |
- MTK_PHY_LED0_10TX | MTK_PHY_LED0_10RX);
- phy_write_mmd(phydev, MDIO_MMD_VEND2, MTK_PHY_LED1_BLINK_CTRL,
- MTK_PHY_LED1_1000TX | MTK_PHY_LED1_1000RX |
- MTK_PHY_LED1_100TX | MTK_PHY_LED1_100RX |
- MTK_PHY_LED1_10TX | MTK_PHY_LED1_10RX);
-
- pinctrl = devm_pinctrl_get_select(&phydev->mdio.dev, "gbe-led");
- if (IS_ERR(pinctrl)) {
- dev_err(&phydev->mdio.bus->dev, "Failed to setup LED pins\n");
- return PTR_ERR(pinctrl);
- }
-
- return 0;
-}
-
-static int mt7988_phy_probe_shared(struct phy_device *phydev)
-{
- struct mtk_socphy_shared_priv *priv = phydev->shared->priv;
- void __iomem *boottrap;
- struct device_node *np;
- u32 reg;
-
- np = of_find_compatible_node(NULL, NULL, "mediatek,boottrap");
- if (!np)
- return -ENOENT;
-
- boottrap = of_iomap(np, 0);
- if (!boottrap)
- return -ENOMEM;
-
- reg = readl(boottrap);
- iounmap(boottrap);
-
- priv->boottrap = reg;
-
- return 0;
-}
-
-static int mt7981_phy_probe(struct phy_device *phydev)
-{
- return mt798x_phy_calibration(phydev);
-}
-
-static int mt7988_phy_probe(struct phy_device *phydev)
-{
- int err;
-
- err = devm_phy_package_join(&phydev->mdio.dev, phydev, 0,
- sizeof(struct mtk_socphy_shared_priv));
- if (err)
- return err;
-
- if (phy_package_probe_once(phydev)) {
- err = mt7988_phy_probe_shared(phydev);
- if (err)
- return err;
- }
-
- mt7988_phy_setup_led(phydev);
-
- return mt798x_phy_calibration(phydev);
-}
-
-static struct phy_driver mtk_socphy_driver[] = {
- {
- PHY_ID_MATCH_EXACT(MTK_GPHY_ID_MT7981),
- .name = "MediaTek MT7981 PHY",
- .config_init = mt798x_phy_config_init,
- .config_intr = genphy_no_config_intr,
- .handle_interrupt = genphy_handle_interrupt_no_ack,
- .probe = mt7981_phy_probe,
- .suspend = genphy_suspend,
- .resume = genphy_resume,
- .read_page = mtk_socphy_read_page,
- .write_page = mtk_socphy_write_page,
- },
- {
- PHY_ID_MATCH_EXACT(MTK_GPHY_ID_MT7988),
- .name = "MediaTek MT7988 PHY",
- .config_init = mt798x_phy_config_init,
- .config_intr = genphy_no_config_intr,
- .handle_interrupt = genphy_handle_interrupt_no_ack,
- .probe = mt7988_phy_probe,
- .suspend = genphy_suspend,
- .resume = genphy_resume,
- .read_page = mtk_socphy_read_page,
- .write_page = mtk_socphy_write_page,
- },
-};
-
-module_phy_driver(mtk_socphy_driver);
-
-static struct mdio_device_id __maybe_unused mtk_socphy_tbl[] = {
- { PHY_ID_MATCH_EXACT(MTK_GPHY_ID_MT7981) },
- { PHY_ID_MATCH_EXACT(MTK_GPHY_ID_MT7988) },
- { }
-};
-
-MODULE_DESCRIPTION("MediaTek SoC Gigabit Ethernet PHY driver");
-MODULE_AUTHOR("Daniel Golle <daniel at makrotopia.org>");
-MODULE_AUTHOR("SkyLake Huang <SkyLake.Huang at mediatek.com>");
-MODULE_LICENSE("GPL");
-
-MODULE_DEVICE_TABLE(mdio, mtk_socphy_tbl);
diff --git a/target/linux/mediatek/patches-5.15/730-net-phy-add-driver-for-MediaTek-SoC-built-in-GE-PHYs.patch b/target/linux/mediatek/patches-5.15/730-net-phy-add-driver-for-MediaTek-SoC-built-in-GE-PHYs.patch
deleted file mode 100644
index 0f06c29867..0000000000
--- a/target/linux/mediatek/patches-5.15/730-net-phy-add-driver-for-MediaTek-SoC-built-in-GE-PHYs.patch
+++ /dev/null
@@ -1,82 +0,0 @@
-From 60ed9eb9605656c19ca402b7bd3f47552e901601 Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel at makrotopia.org>
-Date: Mon, 13 Feb 2023 02:33:14 +0000
-Subject: [PATCH] net: phy: add driver for MediaTek SoC built-in GE PHYs
-
-Some of MediaTek's Filogic SoCs come with built-in gigabit Ethernet
-PHYs which require calibration data from the SoC's efuse.
-Despite the similar design the driver doesn't share any code with the
-existing mediatek-ge.c, so add support for these PHYs by introducing a
-new driver for only MediaTek's ARM64 SoCs.
-
-Signed-off-by: Daniel Golle <daniel at makrotopia.org>
----
- MAINTAINERS | 9 +
- drivers/net/phy/Kconfig | 12 +
- drivers/net/phy/Makefile | 1 +
- drivers/net/phy/mediatek-ge-soc.c | 1263 +++++++++++++++++++++++++++++
- drivers/net/phy/mediatek-ge.c | 3 +-
- 5 files changed, 1287 insertions(+), 1 deletion(-)
- create mode 100644 drivers/net/phy/mediatek-ge-soc.c
-
---- a/MAINTAINERS
-+++ b/MAINTAINERS
-@@ -11790,6 +11790,15 @@ S: Maintained
- F: drivers/net/pcs/pcs-mtk-lynxi.c
- F: include/linux/pcs/pcs-mtk-lynxi.h
-
-+MEDIATEK ETHERNET PHY DRIVERS
-+M: Daniel Golle <daniel at makrotopia.org>
-+M: Qingfang Deng <dqfext at gmail.com>
-+M: SkyLake Huang <SkyLake.Huang at mediatek.com>
-+L: netdev at vger.kernel.org
-+S: Maintained
-+F: drivers/net/phy/mediatek-ge-soc.c
-+F: drivers/net/phy/mediatek-ge.c
-+
- MEDIATEK I2C CONTROLLER DRIVER
- M: Qii Wang <qii.wang at mediatek.com>
- L: linux-i2c at vger.kernel.org
---- a/drivers/net/phy/Kconfig
-+++ b/drivers/net/phy/Kconfig
-@@ -292,6 +292,18 @@ config MEDIATEK_GE_PHY
- help
- Supports the MediaTek Gigabit Ethernet PHYs.
-
-+config MEDIATEK_GE_SOC_PHY
-+ tristate "MediaTek SoC Ethernet PHYs"
-+ depends on (ARM64 && ARCH_MEDIATEK) || COMPILE_TEST
-+ select NVMEM_MTK_EFUSE
-+ help
-+ Supports MediaTek SoC built-in Gigabit Ethernet PHYs.
-+
-+ Include support for built-in Ethernet PHYs which are present in
-+ the MT7981 and MT7988 SoCs. These PHYs need calibration data
-+ present in the SoCs efuse and will dynamically calibrate VCM
-+ (common-mode voltage) during startup.
-+
- config MICREL_PHY
- tristate "Micrel PHYs"
- help
---- a/drivers/net/phy/Makefile
-+++ b/drivers/net/phy/Makefile
-@@ -81,6 +81,7 @@ obj-$(CONFIG_MARVELL_PHY) += marvell.o
- obj-$(CONFIG_MARVELL_88X2222_PHY) += marvell-88x2222.o
- obj-$(CONFIG_MAXLINEAR_GPHY) += mxl-gpy.o
- obj-$(CONFIG_MEDIATEK_GE_PHY) += mediatek-ge.o
-+obj-$(CONFIG_MEDIATEK_GE_SOC_PHY) += mediatek-ge-soc.o
- obj-$(CONFIG_MESON_GXL_PHY) += meson-gxl.o
- obj-$(CONFIG_MICREL_KS8995MA) += spi_ks8995.o
- obj-$(CONFIG_MICREL_PHY) += micrel.o
---- a/drivers/net/phy/mediatek-ge.c
-+++ b/drivers/net/phy/mediatek-ge.c
-@@ -136,7 +136,8 @@ static struct phy_driver mtk_gephy_drive
- module_phy_driver(mtk_gephy_driver);
-
- static struct mdio_device_id __maybe_unused mtk_gephy_tbl[] = {
-- { PHY_ID_MATCH_VENDOR(0x03a29400) },
-+ { PHY_ID_MATCH_EXACT(0x03a29441) },
-+ { PHY_ID_MATCH_EXACT(0x03a29412) },
- { }
- };
-
diff --git a/target/linux/mediatek/patches-5.15/730-v6.5-net-phy-add-driver-for-MediaTek-SoC-built-in-GE-PHYs.patch b/target/linux/mediatek/patches-5.15/730-v6.5-net-phy-add-driver-for-MediaTek-SoC-built-in-GE-PHYs.patch
new file mode 100644
index 0000000000..26ebcb6733
--- /dev/null
+++ b/target/linux/mediatek/patches-5.15/730-v6.5-net-phy-add-driver-for-MediaTek-SoC-built-in-GE-PHYs.patch
@@ -0,0 +1,1204 @@
+From 98c485eaf509bc0e2a85f9b58d17cd501f274c4e Mon Sep 17 00:00:00 2001
+From: Daniel Golle <daniel at makrotopia.org>
+Date: Sun, 11 Jun 2023 00:48:10 +0100
+Subject: [PATCH] net: phy: add driver for MediaTek SoC built-in GE PHYs
+
+Some of MediaTek's Filogic SoCs come with built-in gigabit Ethernet
+PHYs which require calibration data from the SoC's efuse.
+Despite the similar design the driver doesn't share any code with the
+existing mediatek-ge.c.
+Add support for such PHYs by introducing a new driver with basic
+support for MediaTek SoCs MT7981 and MT7988 built-in 1GE PHYs.
+
+Signed-off-by: Daniel Golle <daniel at makrotopia.org>
+Reviewed-by: Andrew Lunn <andrew at lunn.ch>
+Signed-off-by: David S. Miller <davem at davemloft.net>
+---
+ MAINTAINERS | 9 +
+ drivers/net/phy/Kconfig | 12 +
+ drivers/net/phy/Makefile | 1 +
+ drivers/net/phy/mediatek-ge-soc.c | 1116 +++++++++++++++++++++++++++++
+ drivers/net/phy/mediatek-ge.c | 3 +-
+ 5 files changed, 1140 insertions(+), 1 deletion(-)
+ create mode 100644 drivers/net/phy/mediatek-ge-soc.c
+
+--- a/MAINTAINERS
++++ b/MAINTAINERS
+@@ -11790,6 +11790,15 @@ S: Maintained
+ F: drivers/net/pcs/pcs-mtk-lynxi.c
+ F: include/linux/pcs/pcs-mtk-lynxi.h
+
++MEDIATEK ETHERNET PHY DRIVERS
++M: Daniel Golle <daniel at makrotopia.org>
++M: Qingfang Deng <dqfext at gmail.com>
++M: SkyLake Huang <SkyLake.Huang at mediatek.com>
++L: netdev at vger.kernel.org
++S: Maintained
++F: drivers/net/phy/mediatek-ge-soc.c
++F: drivers/net/phy/mediatek-ge.c
++
+ MEDIATEK I2C CONTROLLER DRIVER
+ M: Qii Wang <qii.wang at mediatek.com>
+ L: linux-i2c at vger.kernel.org
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -293,6 +293,18 @@ config MEDIATEK_GE_PHY
+ help
+ Supports the MediaTek Gigabit Ethernet PHYs.
+
++config MEDIATEK_GE_SOC_PHY
++ tristate "MediaTek SoC Ethernet PHYs"
++ depends on (ARM64 && ARCH_MEDIATEK) || COMPILE_TEST
++ select NVMEM_MTK_EFUSE
++ help
++ Supports MediaTek SoC built-in Gigabit Ethernet PHYs.
++
++ Include support for built-in Ethernet PHYs which are present in
++ the MT7981 and MT7988 SoCs. These PHYs need calibration data
++ present in the SoCs efuse and will dynamically calibrate VCM
++ (common-mode voltage) during startup.
++
+ config MICREL_PHY
+ tristate "Micrel PHYs"
+ help
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -81,6 +81,7 @@ obj-$(CONFIG_MARVELL_PHY) += marvell.o
+ obj-$(CONFIG_MARVELL_88X2222_PHY) += marvell-88x2222.o
+ obj-$(CONFIG_MAXLINEAR_GPHY) += mxl-gpy.o
+ obj-$(CONFIG_MEDIATEK_GE_PHY) += mediatek-ge.o
++obj-$(CONFIG_MEDIATEK_GE_SOC_PHY) += mediatek-ge-soc.o
+ obj-$(CONFIG_MESON_GXL_PHY) += meson-gxl.o
+ obj-$(CONFIG_MICREL_KS8995MA) += spi_ks8995.o
+ obj-$(CONFIG_MICREL_PHY) += micrel.o
+--- /dev/null
++++ b/drivers/net/phy/mediatek-ge-soc.c
+@@ -0,0 +1,1116 @@
++// SPDX-License-Identifier: GPL-2.0+
++#include <linux/bitfield.h>
++#include <linux/module.h>
++#include <linux/nvmem-consumer.h>
++#include <linux/of_address.h>
++#include <linux/of_platform.h>
++#include <linux/pinctrl/consumer.h>
++#include <linux/phy.h>
++
++#define MTK_GPHY_ID_MT7981 0x03a29461
++#define MTK_GPHY_ID_MT7988 0x03a29481
++
++#define MTK_EXT_PAGE_ACCESS 0x1f
++#define MTK_PHY_PAGE_STANDARD 0x0000
++#define MTK_PHY_PAGE_EXTENDED_3 0x0003
++
++#define MTK_PHY_LPI_REG_14 0x14
++#define MTK_PHY_LPI_WAKE_TIMER_1000_MASK GENMASK(8, 0)
++
++#define MTK_PHY_LPI_REG_1c 0x1c
++#define MTK_PHY_SMI_DET_ON_THRESH_MASK GENMASK(13, 8)
++
++#define MTK_PHY_PAGE_EXTENDED_2A30 0x2a30
++#define MTK_PHY_PAGE_EXTENDED_52B5 0x52b5
++
++#define ANALOG_INTERNAL_OPERATION_MAX_US 20
++#define TXRESERVE_MIN 0
++#define TXRESERVE_MAX 7
++
++#define MTK_PHY_ANARG_RG 0x10
++#define MTK_PHY_TCLKOFFSET_MASK GENMASK(12, 8)
++
++/* Registers on MDIO_MMD_VEND1 */
++#define MTK_PHY_TXVLD_DA_RG 0x12
++#define MTK_PHY_DA_TX_I2MPB_A_GBE_MASK GENMASK(15, 10)
++#define MTK_PHY_DA_TX_I2MPB_A_TBT_MASK GENMASK(5, 0)
++
++#define MTK_PHY_TX_I2MPB_TEST_MODE_A2 0x16
++#define MTK_PHY_DA_TX_I2MPB_A_HBT_MASK GENMASK(15, 10)
++#define MTK_PHY_DA_TX_I2MPB_A_TST_MASK GENMASK(5, 0)
++
++#define MTK_PHY_TX_I2MPB_TEST_MODE_B1 0x17
++#define MTK_PHY_DA_TX_I2MPB_B_GBE_MASK GENMASK(13, 8)
++#define MTK_PHY_DA_TX_I2MPB_B_TBT_MASK GENMASK(5, 0)
++
++#define MTK_PHY_TX_I2MPB_TEST_MODE_B2 0x18
++#define MTK_PHY_DA_TX_I2MPB_B_HBT_MASK GENMASK(13, 8)
++#define MTK_PHY_DA_TX_I2MPB_B_TST_MASK GENMASK(5, 0)
++
++#define MTK_PHY_TX_I2MPB_TEST_MODE_C1 0x19
++#define MTK_PHY_DA_TX_I2MPB_C_GBE_MASK GENMASK(13, 8)
++#define MTK_PHY_DA_TX_I2MPB_C_TBT_MASK GENMASK(5, 0)
++
++#define MTK_PHY_TX_I2MPB_TEST_MODE_C2 0x20
++#define MTK_PHY_DA_TX_I2MPB_C_HBT_MASK GENMASK(13, 8)
++#define MTK_PHY_DA_TX_I2MPB_C_TST_MASK GENMASK(5, 0)
++
++#define MTK_PHY_TX_I2MPB_TEST_MODE_D1 0x21
++#define MTK_PHY_DA_TX_I2MPB_D_GBE_MASK GENMASK(13, 8)
++#define MTK_PHY_DA_TX_I2MPB_D_TBT_MASK GENMASK(5, 0)
++
++#define MTK_PHY_TX_I2MPB_TEST_MODE_D2 0x22
++#define MTK_PHY_DA_TX_I2MPB_D_HBT_MASK GENMASK(13, 8)
++#define MTK_PHY_DA_TX_I2MPB_D_TST_MASK GENMASK(5, 0)
++
++#define MTK_PHY_RXADC_CTRL_RG7 0xc6
++#define MTK_PHY_DA_AD_BUF_BIAS_LP_MASK GENMASK(9, 8)
++
++#define MTK_PHY_RXADC_CTRL_RG9 0xc8
++#define MTK_PHY_DA_RX_PSBN_TBT_MASK GENMASK(14, 12)
++#define MTK_PHY_DA_RX_PSBN_HBT_MASK GENMASK(10, 8)
++#define MTK_PHY_DA_RX_PSBN_GBE_MASK GENMASK(6, 4)
++#define MTK_PHY_DA_RX_PSBN_LP_MASK GENMASK(2, 0)
++
++#define MTK_PHY_LDO_OUTPUT_V 0xd7
++
++#define MTK_PHY_RG_ANA_CAL_RG0 0xdb
++#define MTK_PHY_RG_CAL_CKINV BIT(12)
++#define MTK_PHY_RG_ANA_CALEN BIT(8)
++#define MTK_PHY_RG_ZCALEN_A BIT(0)
++
++#define MTK_PHY_RG_ANA_CAL_RG1 0xdc
++#define MTK_PHY_RG_ZCALEN_B BIT(12)
++#define MTK_PHY_RG_ZCALEN_C BIT(8)
++#define MTK_PHY_RG_ZCALEN_D BIT(4)
++#define MTK_PHY_RG_TXVOS_CALEN BIT(0)
++
++#define MTK_PHY_RG_ANA_CAL_RG5 0xe0
++#define MTK_PHY_RG_REXT_TRIM_MASK GENMASK(13, 8)
++
++#define MTK_PHY_RG_TX_FILTER 0xfe
++
++#define MTK_PHY_RG_LPI_PCS_DSP_CTRL_REG120 0x120
++#define MTK_PHY_LPI_SIG_EN_LO_THRESH1000_MASK GENMASK(12, 8)
++#define MTK_PHY_LPI_SIG_EN_HI_THRESH1000_MASK GENMASK(4, 0)
++
++#define MTK_PHY_RG_LPI_PCS_DSP_CTRL_REG122 0x122
++#define MTK_PHY_LPI_NORM_MSE_HI_THRESH1000_MASK GENMASK(7, 0)
++
++#define MTK_PHY_RG_TESTMUX_ADC_CTRL 0x144
++#define MTK_PHY_RG_TXEN_DIG_MASK GENMASK(5, 5)
++
++#define MTK_PHY_RG_CR_TX_AMP_OFFSET_A_B 0x172
++#define MTK_PHY_CR_TX_AMP_OFFSET_A_MASK GENMASK(13, 8)
++#define MTK_PHY_CR_TX_AMP_OFFSET_B_MASK GENMASK(6, 0)
++
++#define MTK_PHY_RG_CR_TX_AMP_OFFSET_C_D 0x173
++#define MTK_PHY_CR_TX_AMP_OFFSET_C_MASK GENMASK(13, 8)
++#define MTK_PHY_CR_TX_AMP_OFFSET_D_MASK GENMASK(6, 0)
++
++#define MTK_PHY_RG_AD_CAL_COMP 0x17a
++#define MTK_PHY_AD_CAL_COMP_OUT_SHIFT (8)
++
++#define MTK_PHY_RG_AD_CAL_CLK 0x17b
++#define MTK_PHY_DA_CAL_CLK BIT(0)
++
++#define MTK_PHY_RG_AD_CALIN 0x17c
++#define MTK_PHY_DA_CALIN_FLAG BIT(0)
++
++#define MTK_PHY_RG_DASN_DAC_IN0_A 0x17d
++#define MTK_PHY_DASN_DAC_IN0_A_MASK GENMASK(9, 0)
++
++#define MTK_PHY_RG_DASN_DAC_IN0_B 0x17e
++#define MTK_PHY_DASN_DAC_IN0_B_MASK GENMASK(9, 0)
++
++#define MTK_PHY_RG_DASN_DAC_IN0_C 0x17f
++#define MTK_PHY_DASN_DAC_IN0_C_MASK GENMASK(9, 0)
++
++#define MTK_PHY_RG_DASN_DAC_IN0_D 0x180
++#define MTK_PHY_DASN_DAC_IN0_D_MASK GENMASK(9, 0)
++
++#define MTK_PHY_RG_DASN_DAC_IN1_A 0x181
++#define MTK_PHY_DASN_DAC_IN1_A_MASK GENMASK(9, 0)
++
++#define MTK_PHY_RG_DASN_DAC_IN1_B 0x182
++#define MTK_PHY_DASN_DAC_IN1_B_MASK GENMASK(9, 0)
++
++#define MTK_PHY_RG_DASN_DAC_IN1_C 0x183
++#define MTK_PHY_DASN_DAC_IN1_C_MASK GENMASK(9, 0)
++
++#define MTK_PHY_RG_DASN_DAC_IN1_D 0x184
++#define MTK_PHY_DASN_DAC_IN1_D_MASK GENMASK(9, 0)
++
++#define MTK_PHY_RG_DEV1E_REG19b 0x19b
++#define MTK_PHY_BYPASS_DSP_LPI_READY BIT(8)
++
++#define MTK_PHY_RG_LP_IIR2_K1_L 0x22a
++#define MTK_PHY_RG_LP_IIR2_K1_U 0x22b
++#define MTK_PHY_RG_LP_IIR2_K2_L 0x22c
++#define MTK_PHY_RG_LP_IIR2_K2_U 0x22d
++#define MTK_PHY_RG_LP_IIR2_K3_L 0x22e
++#define MTK_PHY_RG_LP_IIR2_K3_U 0x22f
++#define MTK_PHY_RG_LP_IIR2_K4_L 0x230
++#define MTK_PHY_RG_LP_IIR2_K4_U 0x231
++#define MTK_PHY_RG_LP_IIR2_K5_L 0x232
++#define MTK_PHY_RG_LP_IIR2_K5_U 0x233
++
++#define MTK_PHY_RG_DEV1E_REG234 0x234
++#define MTK_PHY_TR_OPEN_LOOP_EN_MASK GENMASK(0, 0)
++#define MTK_PHY_LPF_X_AVERAGE_MASK GENMASK(7, 4)
++#define MTK_PHY_TR_LP_IIR_EEE_EN BIT(12)
++
++#define MTK_PHY_RG_LPF_CNT_VAL 0x235
++
++#define MTK_PHY_RG_DEV1E_REG238 0x238
++#define MTK_PHY_LPI_SLV_SEND_TX_TIMER_MASK GENMASK(8, 0)
++#define MTK_PHY_LPI_SLV_SEND_TX_EN BIT(12)
++
++#define MTK_PHY_RG_DEV1E_REG239 0x239
++#define MTK_PHY_LPI_SEND_LOC_TIMER_MASK GENMASK(8, 0)
++#define MTK_PHY_LPI_TXPCS_LOC_RCV BIT(12)
++
++#define MTK_PHY_RG_DEV1E_REG27C 0x27c
++#define MTK_PHY_VGASTATE_FFE_THR_ST1_MASK GENMASK(12, 8)
++#define MTK_PHY_RG_DEV1E_REG27D 0x27d
++#define MTK_PHY_VGASTATE_FFE_THR_ST2_MASK GENMASK(4, 0)
++
++#define MTK_PHY_RG_DEV1E_REG2C7 0x2c7
++#define MTK_PHY_MAX_GAIN_MASK GENMASK(4, 0)
++#define MTK_PHY_MIN_GAIN_MASK GENMASK(12, 8)
++
++#define MTK_PHY_RG_DEV1E_REG2D1 0x2d1
++#define MTK_PHY_VCO_SLICER_THRESH_BITS_HIGH_EEE_MASK GENMASK(7, 0)
++#define MTK_PHY_LPI_SKIP_SD_SLV_TR BIT(8)
++#define MTK_PHY_LPI_TR_READY BIT(9)
++#define MTK_PHY_LPI_VCO_EEE_STG0_EN BIT(10)
++
++#define MTK_PHY_RG_DEV1E_REG323 0x323
++#define MTK_PHY_EEE_WAKE_MAS_INT_DC BIT(0)
++#define MTK_PHY_EEE_WAKE_SLV_INT_DC BIT(4)
++
++#define MTK_PHY_RG_DEV1E_REG324 0x324
++#define MTK_PHY_SMI_DETCNT_MAX_MASK GENMASK(5, 0)
++#define MTK_PHY_SMI_DET_MAX_EN BIT(8)
++
++#define MTK_PHY_RG_DEV1E_REG326 0x326
++#define MTK_PHY_LPI_MODE_SD_ON BIT(0)
++#define MTK_PHY_RESET_RANDUPD_CNT BIT(1)
++#define MTK_PHY_TREC_UPDATE_ENAB_CLR BIT(2)
++#define MTK_PHY_LPI_QUIT_WAIT_DFE_SIG_DET_OFF BIT(4)
++#define MTK_PHY_TR_READY_SKIP_AFE_WAKEUP BIT(5)
++
++#define MTK_PHY_LDO_PUMP_EN_PAIRAB 0x502
++#define MTK_PHY_LDO_PUMP_EN_PAIRCD 0x503
++
++#define MTK_PHY_DA_TX_R50_PAIR_A 0x53d
++#define MTK_PHY_DA_TX_R50_PAIR_B 0x53e
++#define MTK_PHY_DA_TX_R50_PAIR_C 0x53f
++#define MTK_PHY_DA_TX_R50_PAIR_D 0x540
++
++#define MTK_PHY_RG_BG_RASEL 0x115
++#define MTK_PHY_RG_BG_RASEL_MASK GENMASK(2, 0)
++
++/* These macro privides efuse parsing for internal phy. */
++#define EFS_DA_TX_I2MPB_A(x) (((x) >> 0) & GENMASK(5, 0))
++#define EFS_DA_TX_I2MPB_B(x) (((x) >> 6) & GENMASK(5, 0))
++#define EFS_DA_TX_I2MPB_C(x) (((x) >> 12) & GENMASK(5, 0))
++#define EFS_DA_TX_I2MPB_D(x) (((x) >> 18) & GENMASK(5, 0))
++#define EFS_DA_TX_AMP_OFFSET_A(x) (((x) >> 24) & GENMASK(5, 0))
++
++#define EFS_DA_TX_AMP_OFFSET_B(x) (((x) >> 0) & GENMASK(5, 0))
++#define EFS_DA_TX_AMP_OFFSET_C(x) (((x) >> 6) & GENMASK(5, 0))
++#define EFS_DA_TX_AMP_OFFSET_D(x) (((x) >> 12) & GENMASK(5, 0))
++#define EFS_DA_TX_R50_A(x) (((x) >> 18) & GENMASK(5, 0))
++#define EFS_DA_TX_R50_B(x) (((x) >> 24) & GENMASK(5, 0))
++
++#define EFS_DA_TX_R50_C(x) (((x) >> 0) & GENMASK(5, 0))
++#define EFS_DA_TX_R50_D(x) (((x) >> 6) & GENMASK(5, 0))
++
++#define EFS_RG_BG_RASEL(x) (((x) >> 4) & GENMASK(2, 0))
++#define EFS_RG_REXT_TRIM(x) (((x) >> 7) & GENMASK(5, 0))
++
++enum {
++ NO_PAIR,
++ PAIR_A,
++ PAIR_B,
++ PAIR_C,
++ PAIR_D,
++};
++
++enum {
++ GPHY_PORT0,
++ GPHY_PORT1,
++ GPHY_PORT2,
++ GPHY_PORT3,
++};
++
++enum calibration_mode {
++ EFUSE_K,
++ SW_K
++};
++
++enum CAL_ITEM {
++ REXT,
++ TX_OFFSET,
++ TX_AMP,
++ TX_R50,
++ TX_VCM
++};
++
++enum CAL_MODE {
++ EFUSE_M,
++ SW_M
++};
++
++static int mtk_socphy_read_page(struct phy_device *phydev)
++{
++ return __phy_read(phydev, MTK_EXT_PAGE_ACCESS);
++}
++
++static int mtk_socphy_write_page(struct phy_device *phydev, int page)
++{
++ return __phy_write(phydev, MTK_EXT_PAGE_ACCESS, page);
++}
++
++/* One calibration cycle consists of:
++ * 1.Set DA_CALIN_FLAG high to start calibration. Keep it high
++ * until AD_CAL_COMP is ready to output calibration result.
++ * 2.Wait until DA_CAL_CLK is available.
++ * 3.Fetch AD_CAL_COMP_OUT.
++ */
++static int cal_cycle(struct phy_device *phydev, int devad,
++ u32 regnum, u16 mask, u16 cal_val)
++{
++ int reg_val;
++ int ret;
++
++ phy_modify_mmd(phydev, devad, regnum,
++ mask, cal_val);
++ phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_AD_CALIN,
++ MTK_PHY_DA_CALIN_FLAG);
++
++ ret = phy_read_mmd_poll_timeout(phydev, MDIO_MMD_VEND1,
++ MTK_PHY_RG_AD_CAL_CLK, reg_val,
++ reg_val & MTK_PHY_DA_CAL_CLK, 500,
++ ANALOG_INTERNAL_OPERATION_MAX_US, false);
++ if (ret) {
++ phydev_err(phydev, "Calibration cycle timeout\n");
++ return ret;
++ }
++
++ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_AD_CALIN,
++ MTK_PHY_DA_CALIN_FLAG);
++ ret = phy_read_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_AD_CAL_COMP) >>
++ MTK_PHY_AD_CAL_COMP_OUT_SHIFT;
++ phydev_dbg(phydev, "cal_val: 0x%x, ret: %d\n", cal_val, ret);
++
++ return ret;
++}
++
++static int rext_fill_result(struct phy_device *phydev, u16 *buf)
++{
++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG5,
++ MTK_PHY_RG_REXT_TRIM_MASK, buf[0] << 8);
++ phy_modify_mmd(phydev, MDIO_MMD_VEND2, MTK_PHY_RG_BG_RASEL,
++ MTK_PHY_RG_BG_RASEL_MASK, buf[1]);
++
++ return 0;
++}
++
++static int rext_cal_efuse(struct phy_device *phydev, u32 *buf)
++{
++ u16 rext_cal_val[2];
++
++ rext_cal_val[0] = EFS_RG_REXT_TRIM(buf[3]);
++ rext_cal_val[1] = EFS_RG_BG_RASEL(buf[3]);
++ rext_fill_result(phydev, rext_cal_val);
++
++ return 0;
++}
++
++static int tx_offset_fill_result(struct phy_device *phydev, u16 *buf)
++{
++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_CR_TX_AMP_OFFSET_A_B,
++ MTK_PHY_CR_TX_AMP_OFFSET_A_MASK, buf[0] << 8);
++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_CR_TX_AMP_OFFSET_A_B,
++ MTK_PHY_CR_TX_AMP_OFFSET_B_MASK, buf[1]);
++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_CR_TX_AMP_OFFSET_C_D,
++ MTK_PHY_CR_TX_AMP_OFFSET_C_MASK, buf[2] << 8);
++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_CR_TX_AMP_OFFSET_C_D,
++ MTK_PHY_CR_TX_AMP_OFFSET_D_MASK, buf[3]);
++
++ return 0;
++}
++
++static int tx_offset_cal_efuse(struct phy_device *phydev, u32 *buf)
++{
++ u16 tx_offset_cal_val[4];
++
++ tx_offset_cal_val[0] = EFS_DA_TX_AMP_OFFSET_A(buf[0]);
++ tx_offset_cal_val[1] = EFS_DA_TX_AMP_OFFSET_B(buf[1]);
++ tx_offset_cal_val[2] = EFS_DA_TX_AMP_OFFSET_C(buf[1]);
++ tx_offset_cal_val[3] = EFS_DA_TX_AMP_OFFSET_D(buf[1]);
++
++ tx_offset_fill_result(phydev, tx_offset_cal_val);
++
++ return 0;
++}
++
++static int tx_amp_fill_result(struct phy_device *phydev, u16 *buf)
++{
++ int i;
++ int bias[16] = {};
++ const int vals_9461[16] = { 7, 1, 4, 7,
++ 7, 1, 4, 7,
++ 7, 1, 4, 7,
++ 7, 1, 4, 7 };
++ const int vals_9481[16] = { 10, 6, 6, 10,
++ 10, 6, 6, 10,
++ 10, 6, 6, 10,
++ 10, 6, 6, 10 };
++ switch (phydev->drv->phy_id) {
++ case MTK_GPHY_ID_MT7981:
++ /* We add some calibration to efuse values
++ * due to board level influence.
++ * GBE: +7, TBT: +1, HBT: +4, TST: +7
++ */
++ memcpy(bias, (const void *)vals_9461, sizeof(bias));
++ break;
++ case MTK_GPHY_ID_MT7988:
++ memcpy(bias, (const void *)vals_9481, sizeof(bias));
++ break;
++ }
++
++ /* Prevent overflow */
++ for (i = 0; i < 12; i++) {
++ if (buf[i >> 2] + bias[i] > 63) {
++ buf[i >> 2] = 63;
++ bias[i] = 0;
++ }
++ }
++
++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TXVLD_DA_RG,
++ MTK_PHY_DA_TX_I2MPB_A_GBE_MASK, (buf[0] + bias[0]) << 10);
++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TXVLD_DA_RG,
++ MTK_PHY_DA_TX_I2MPB_A_TBT_MASK, buf[0] + bias[1]);
++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_A2,
++ MTK_PHY_DA_TX_I2MPB_A_HBT_MASK, (buf[0] + bias[2]) << 10);
++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_A2,
++ MTK_PHY_DA_TX_I2MPB_A_TST_MASK, buf[0] + bias[3]);
++
++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_B1,
++ MTK_PHY_DA_TX_I2MPB_B_GBE_MASK, (buf[1] + bias[4]) << 8);
++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_B1,
++ MTK_PHY_DA_TX_I2MPB_B_TBT_MASK, buf[1] + bias[5]);
++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_B2,
++ MTK_PHY_DA_TX_I2MPB_B_HBT_MASK, (buf[1] + bias[6]) << 8);
++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_B2,
++ MTK_PHY_DA_TX_I2MPB_B_TST_MASK, buf[1] + bias[7]);
++
++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_C1,
++ MTK_PHY_DA_TX_I2MPB_C_GBE_MASK, (buf[2] + bias[8]) << 8);
++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_C1,
++ MTK_PHY_DA_TX_I2MPB_C_TBT_MASK, buf[2] + bias[9]);
++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_C2,
++ MTK_PHY_DA_TX_I2MPB_C_HBT_MASK, (buf[2] + bias[10]) << 8);
++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_C2,
++ MTK_PHY_DA_TX_I2MPB_C_TST_MASK, buf[2] + bias[11]);
++
++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_D1,
++ MTK_PHY_DA_TX_I2MPB_D_GBE_MASK, (buf[3] + bias[12]) << 8);
++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_D1,
++ MTK_PHY_DA_TX_I2MPB_D_TBT_MASK, buf[3] + bias[13]);
++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_D2,
++ MTK_PHY_DA_TX_I2MPB_D_HBT_MASK, (buf[3] + bias[14]) << 8);
++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_D2,
++ MTK_PHY_DA_TX_I2MPB_D_TST_MASK, buf[3] + bias[15]);
++
++ return 0;
++}
++
++static int tx_amp_cal_efuse(struct phy_device *phydev, u32 *buf)
++{
++ u16 tx_amp_cal_val[4];
++
++ tx_amp_cal_val[0] = EFS_DA_TX_I2MPB_A(buf[0]);
++ tx_amp_cal_val[1] = EFS_DA_TX_I2MPB_B(buf[0]);
++ tx_amp_cal_val[2] = EFS_DA_TX_I2MPB_C(buf[0]);
++ tx_amp_cal_val[3] = EFS_DA_TX_I2MPB_D(buf[0]);
++ tx_amp_fill_result(phydev, tx_amp_cal_val);
++
++ return 0;
++}
++
++static int tx_r50_fill_result(struct phy_device *phydev, u16 tx_r50_cal_val,
++ u8 txg_calen_x)
++{
++ int bias = 0;
++ u16 reg, val;
++
++ if (phydev->drv->phy_id == MTK_GPHY_ID_MT7988)
++ bias = -2;
++
++ val = clamp_val(bias + tx_r50_cal_val, 0, 63);
++
++ switch (txg_calen_x) {
++ case PAIR_A:
++ reg = MTK_PHY_DA_TX_R50_PAIR_A;
++ break;
++ case PAIR_B:
++ reg = MTK_PHY_DA_TX_R50_PAIR_B;
++ break;
++ case PAIR_C:
++ reg = MTK_PHY_DA_TX_R50_PAIR_C;
++ break;
++ case PAIR_D:
++ reg = MTK_PHY_DA_TX_R50_PAIR_D;
++ break;
++ default:
++ return -EINVAL;
++ }
++
++ phy_write_mmd(phydev, MDIO_MMD_VEND1, reg, val | val << 8);
++
++ return 0;
++}
++
++static int tx_r50_cal_efuse(struct phy_device *phydev, u32 *buf,
++ u8 txg_calen_x)
++{
++ u16 tx_r50_cal_val;
++
++ switch (txg_calen_x) {
++ case PAIR_A:
++ tx_r50_cal_val = EFS_DA_TX_R50_A(buf[1]);
++ break;
++ case PAIR_B:
++ tx_r50_cal_val = EFS_DA_TX_R50_B(buf[1]);
++ break;
++ case PAIR_C:
++ tx_r50_cal_val = EFS_DA_TX_R50_C(buf[2]);
++ break;
++ case PAIR_D:
++ tx_r50_cal_val = EFS_DA_TX_R50_D(buf[2]);
++ break;
++ default:
++ return -EINVAL;
++ }
++ tx_r50_fill_result(phydev, tx_r50_cal_val, txg_calen_x);
++
++ return 0;
++}
++
++static int tx_vcm_cal_sw(struct phy_device *phydev, u8 rg_txreserve_x)
++{
++ u8 lower_idx, upper_idx, txreserve_val;
++ u8 lower_ret, upper_ret;
++ int ret;
++
++ phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG0,
++ MTK_PHY_RG_ANA_CALEN);
++ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG0,
++ MTK_PHY_RG_CAL_CKINV);
++ phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG1,
++ MTK_PHY_RG_TXVOS_CALEN);
++
++ switch (rg_txreserve_x) {
++ case PAIR_A:
++ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
++ MTK_PHY_RG_DASN_DAC_IN0_A,
++ MTK_PHY_DASN_DAC_IN0_A_MASK);
++ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
++ MTK_PHY_RG_DASN_DAC_IN1_A,
++ MTK_PHY_DASN_DAC_IN1_A_MASK);
++ phy_set_bits_mmd(phydev, MDIO_MMD_VEND1,
++ MTK_PHY_RG_ANA_CAL_RG0,
++ MTK_PHY_RG_ZCALEN_A);
++ break;
++ case PAIR_B:
++ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
++ MTK_PHY_RG_DASN_DAC_IN0_B,
++ MTK_PHY_DASN_DAC_IN0_B_MASK);
++ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
++ MTK_PHY_RG_DASN_DAC_IN1_B,
++ MTK_PHY_DASN_DAC_IN1_B_MASK);
++ phy_set_bits_mmd(phydev, MDIO_MMD_VEND1,
++ MTK_PHY_RG_ANA_CAL_RG1,
++ MTK_PHY_RG_ZCALEN_B);
++ break;
++ case PAIR_C:
++ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
++ MTK_PHY_RG_DASN_DAC_IN0_C,
++ MTK_PHY_DASN_DAC_IN0_C_MASK);
++ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
++ MTK_PHY_RG_DASN_DAC_IN1_C,
++ MTK_PHY_DASN_DAC_IN1_C_MASK);
++ phy_set_bits_mmd(phydev, MDIO_MMD_VEND1,
++ MTK_PHY_RG_ANA_CAL_RG1,
++ MTK_PHY_RG_ZCALEN_C);
++ break;
++ case PAIR_D:
++ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
++ MTK_PHY_RG_DASN_DAC_IN0_D,
++ MTK_PHY_DASN_DAC_IN0_D_MASK);
++ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
++ MTK_PHY_RG_DASN_DAC_IN1_D,
++ MTK_PHY_DASN_DAC_IN1_D_MASK);
++ phy_set_bits_mmd(phydev, MDIO_MMD_VEND1,
++ MTK_PHY_RG_ANA_CAL_RG1,
++ MTK_PHY_RG_ZCALEN_D);
++ break;
++ default:
++ ret = -EINVAL;
++ goto restore;
++ }
++
++ lower_idx = TXRESERVE_MIN;
++ upper_idx = TXRESERVE_MAX;
++
++ phydev_dbg(phydev, "Start TX-VCM SW cal.\n");
++ while ((upper_idx - lower_idx) > 1) {
++ txreserve_val = DIV_ROUND_CLOSEST(lower_idx + upper_idx, 2);
++ ret = cal_cycle(phydev, MDIO_MMD_VEND1, MTK_PHY_RXADC_CTRL_RG9,
++ MTK_PHY_DA_RX_PSBN_TBT_MASK |
++ MTK_PHY_DA_RX_PSBN_HBT_MASK |
++ MTK_PHY_DA_RX_PSBN_GBE_MASK |
++ MTK_PHY_DA_RX_PSBN_LP_MASK,
++ txreserve_val << 12 | txreserve_val << 8 |
++ txreserve_val << 4 | txreserve_val);
++ if (ret == 1) {
++ upper_idx = txreserve_val;
++ upper_ret = ret;
++ } else if (ret == 0) {
++ lower_idx = txreserve_val;
++ lower_ret = ret;
++ } else {
++ goto restore;
++ }
++ }
++
++ if (lower_idx == TXRESERVE_MIN) {
++ lower_ret = cal_cycle(phydev, MDIO_MMD_VEND1,
++ MTK_PHY_RXADC_CTRL_RG9,
++ MTK_PHY_DA_RX_PSBN_TBT_MASK |
++ MTK_PHY_DA_RX_PSBN_HBT_MASK |
++ MTK_PHY_DA_RX_PSBN_GBE_MASK |
++ MTK_PHY_DA_RX_PSBN_LP_MASK,
++ lower_idx << 12 | lower_idx << 8 |
++ lower_idx << 4 | lower_idx);
++ ret = lower_ret;
++ } else if (upper_idx == TXRESERVE_MAX) {
++ upper_ret = cal_cycle(phydev, MDIO_MMD_VEND1,
++ MTK_PHY_RXADC_CTRL_RG9,
++ MTK_PHY_DA_RX_PSBN_TBT_MASK |
++ MTK_PHY_DA_RX_PSBN_HBT_MASK |
++ MTK_PHY_DA_RX_PSBN_GBE_MASK |
++ MTK_PHY_DA_RX_PSBN_LP_MASK,
++ upper_idx << 12 | upper_idx << 8 |
++ upper_idx << 4 | upper_idx);
++ ret = upper_ret;
++ }
++ if (ret < 0)
++ goto restore;
++
++ /* We calibrate TX-VCM in different logic. Check upper index and then
++ * lower index. If this calibration is valid, apply lower index's result.
++ */
++ ret = upper_ret - lower_ret;
++ if (ret == 1) {
++ ret = 0;
++ /* Make sure we use upper_idx in our calibration system */
++ cal_cycle(phydev, MDIO_MMD_VEND1, MTK_PHY_RXADC_CTRL_RG9,
++ MTK_PHY_DA_RX_PSBN_TBT_MASK |
++ MTK_PHY_DA_RX_PSBN_HBT_MASK |
++ MTK_PHY_DA_RX_PSBN_GBE_MASK |
++ MTK_PHY_DA_RX_PSBN_LP_MASK,
++ upper_idx << 12 | upper_idx << 8 |
++ upper_idx << 4 | upper_idx);
++ phydev_dbg(phydev, "TX-VCM SW cal result: 0x%x\n", upper_idx);
++ } else if (lower_idx == TXRESERVE_MIN && upper_ret == 1 &&
++ lower_ret == 1) {
++ ret = 0;
++ cal_cycle(phydev, MDIO_MMD_VEND1, MTK_PHY_RXADC_CTRL_RG9,
++ MTK_PHY_DA_RX_PSBN_TBT_MASK |
++ MTK_PHY_DA_RX_PSBN_HBT_MASK |
++ MTK_PHY_DA_RX_PSBN_GBE_MASK |
++ MTK_PHY_DA_RX_PSBN_LP_MASK,
++ lower_idx << 12 | lower_idx << 8 |
++ lower_idx << 4 | lower_idx);
++ phydev_warn(phydev, "TX-VCM SW cal result at low margin 0x%x\n",
++ lower_idx);
++ } else if (upper_idx == TXRESERVE_MAX && upper_ret == 0 &&
++ lower_ret == 0) {
++ ret = 0;
++ phydev_warn(phydev, "TX-VCM SW cal result at high margin 0x%x\n",
++ upper_idx);
++ } else {
++ ret = -EINVAL;
++ }
++
++restore:
++ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG0,
++ MTK_PHY_RG_ANA_CALEN);
++ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG1,
++ MTK_PHY_RG_TXVOS_CALEN);
++ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG0,
++ MTK_PHY_RG_ZCALEN_A);
++ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG1,
++ MTK_PHY_RG_ZCALEN_B | MTK_PHY_RG_ZCALEN_C |
++ MTK_PHY_RG_ZCALEN_D);
++
++ return ret;
++}
++
++static void mt798x_phy_common_finetune(struct phy_device *phydev)
++{
++ phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_52B5);
++ /* EnabRandUpdTrig = 1 */
++ __phy_write(phydev, 0x11, 0x2f00);
++ __phy_write(phydev, 0x12, 0xe);
++ __phy_write(phydev, 0x10, 0x8fb0);
++
++ /* NormMseLoThresh = 85 */
++ __phy_write(phydev, 0x11, 0x55a0);
++ __phy_write(phydev, 0x12, 0x0);
++ __phy_write(phydev, 0x10, 0x83aa);
++
++ /* TrFreeze = 0 */
++ __phy_write(phydev, 0x11, 0x0);
++ __phy_write(phydev, 0x12, 0x0);
++ __phy_write(phydev, 0x10, 0x9686);
++
++ /* SSTrKp1000Slv = 5 */
++ __phy_write(phydev, 0x11, 0xbaef);
++ __phy_write(phydev, 0x12, 0x2e);
++ __phy_write(phydev, 0x10, 0x968c);
++
++ /* MrvlTrFix100Kp = 3, MrvlTrFix100Kf = 2,
++ * MrvlTrFix1000Kp = 3, MrvlTrFix1000Kf = 2
++ */
++ __phy_write(phydev, 0x11, 0xd10a);
++ __phy_write(phydev, 0x12, 0x34);
++ __phy_write(phydev, 0x10, 0x8f82);
++
++ /* VcoSlicerThreshBitsHigh */
++ __phy_write(phydev, 0x11, 0x5555);
++ __phy_write(phydev, 0x12, 0x55);
++ __phy_write(phydev, 0x10, 0x8ec0);
++ phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0);
++
++ /* TR_OPEN_LOOP_EN = 1, lpf_x_average = 9*/
++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG234,
++ MTK_PHY_TR_OPEN_LOOP_EN_MASK | MTK_PHY_LPF_X_AVERAGE_MASK,
++ BIT(0) | FIELD_PREP(MTK_PHY_LPF_X_AVERAGE_MASK, 0x9));
++
++ /* rg_tr_lpf_cnt_val = 512 */
++ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LPF_CNT_VAL, 0x200);
++
++ /* IIR2 related */
++ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K1_L, 0x82);
++ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K1_U, 0x0);
++ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K2_L, 0x103);
++ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K2_U, 0x0);
++ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K3_L, 0x82);
++ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K3_U, 0x0);
++ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K4_L, 0xd177);
++ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K4_U, 0x3);
++ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K5_L, 0x2c82);
++ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K5_U, 0xe);
++
++ /* FFE peaking */
++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG27C,
++ MTK_PHY_VGASTATE_FFE_THR_ST1_MASK, 0x1b << 8);
++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG27D,
++ MTK_PHY_VGASTATE_FFE_THR_ST2_MASK, 0x1e);
++
++ /* Disable LDO pump */
++ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_LDO_PUMP_EN_PAIRAB, 0x0);
++ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_LDO_PUMP_EN_PAIRCD, 0x0);
++ /* Adjust LDO output voltage */
++ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_LDO_OUTPUT_V, 0x2222);
++}
++
++static void mt7981_phy_finetune(struct phy_device *phydev)
++{
++ u16 val[8] = { 0x01ce, 0x01c1,
++ 0x020f, 0x0202,
++ 0x03d0, 0x03c0,
++ 0x0013, 0x0005 };
++ int i, k;
++
++ /* 100M eye finetune:
++ * Keep middle level of TX MLT3 shapper as default.
++ * Only change TX MLT3 overshoot level here.
++ */
++ for (k = 0, i = 1; i < 12; i++) {
++ if (i % 3 == 0)
++ continue;
++ phy_write_mmd(phydev, MDIO_MMD_VEND1, i, val[k++]);
++ }
++
++ phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_52B5);
++ /* SlvDSPreadyTime = 24, MasDSPreadyTime = 24 */
++ __phy_write(phydev, 0x11, 0xc71);
++ __phy_write(phydev, 0x12, 0xc);
++ __phy_write(phydev, 0x10, 0x8fae);
++
++ /* ResetSyncOffset = 6 */
++ __phy_write(phydev, 0x11, 0x600);
++ __phy_write(phydev, 0x12, 0x0);
++ __phy_write(phydev, 0x10, 0x8fc0);
++
++ /* VgaDecRate = 1 */
++ __phy_write(phydev, 0x11, 0x4c2a);
++ __phy_write(phydev, 0x12, 0x3e);
++ __phy_write(phydev, 0x10, 0x8fa4);
++
++ /* FfeUpdGainForce = 4 */
++ __phy_write(phydev, 0x11, 0x240);
++ __phy_write(phydev, 0x12, 0x0);
++ __phy_write(phydev, 0x10, 0x9680);
++
++ phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0);
++}
++
++static void mt7988_phy_finetune(struct phy_device *phydev)
++{
++ u16 val[12] = { 0x0187, 0x01cd, 0x01c8, 0x0182,
++ 0x020d, 0x0206, 0x0384, 0x03d0,
++ 0x03c6, 0x030a, 0x0011, 0x0005 };
++ int i;
++
++ /* Set default MLT3 shaper first */
++ for (i = 0; i < 12; i++)
++ phy_write_mmd(phydev, MDIO_MMD_VEND1, i, val[i]);
++
++ /* TCT finetune */
++ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_TX_FILTER, 0x5);
++
++ /* Disable TX power saving */
++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RXADC_CTRL_RG7,
++ MTK_PHY_DA_AD_BUF_BIAS_LP_MASK, 0x3 << 8);
++
++ phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_52B5);
++
++ /* SlvDSPreadyTime = 24, MasDSPreadyTime = 12 */
++ __phy_write(phydev, 0x11, 0x671);
++ __phy_write(phydev, 0x12, 0xc);
++ __phy_write(phydev, 0x10, 0x8fae);
++
++ /* ResetSyncOffset = 5 */
++ __phy_write(phydev, 0x11, 0x500);
++ __phy_write(phydev, 0x12, 0x0);
++ __phy_write(phydev, 0x10, 0x8fc0);
++
++ /* VgaDecRate is 1 at default on mt7988 */
++
++ phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0);
++
++ phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_2A30);
++ /* TxClkOffset = 2 */
++ __phy_modify(phydev, MTK_PHY_ANARG_RG, MTK_PHY_TCLKOFFSET_MASK,
++ FIELD_PREP(MTK_PHY_TCLKOFFSET_MASK, 0x2));
++ phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0);
++}
++
++static void mt798x_phy_eee(struct phy_device *phydev)
++{
++ phy_modify_mmd(phydev, MDIO_MMD_VEND1,
++ MTK_PHY_RG_LPI_PCS_DSP_CTRL_REG120,
++ MTK_PHY_LPI_SIG_EN_LO_THRESH1000_MASK |
++ MTK_PHY_LPI_SIG_EN_HI_THRESH1000_MASK,
++ FIELD_PREP(MTK_PHY_LPI_SIG_EN_LO_THRESH1000_MASK, 0x0) |
++ FIELD_PREP(MTK_PHY_LPI_SIG_EN_HI_THRESH1000_MASK, 0x14));
++
++ phy_modify_mmd(phydev, MDIO_MMD_VEND1,
++ MTK_PHY_RG_LPI_PCS_DSP_CTRL_REG122,
++ MTK_PHY_LPI_NORM_MSE_HI_THRESH1000_MASK,
++ FIELD_PREP(MTK_PHY_LPI_NORM_MSE_HI_THRESH1000_MASK,
++ 0xff));
++
++ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
++ MTK_PHY_RG_TESTMUX_ADC_CTRL,
++ MTK_PHY_RG_TXEN_DIG_MASK);
++
++ phy_set_bits_mmd(phydev, MDIO_MMD_VEND1,
++ MTK_PHY_RG_DEV1E_REG19b, MTK_PHY_BYPASS_DSP_LPI_READY);
++
++ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
++ MTK_PHY_RG_DEV1E_REG234, MTK_PHY_TR_LP_IIR_EEE_EN);
++
++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG238,
++ MTK_PHY_LPI_SLV_SEND_TX_TIMER_MASK |
++ MTK_PHY_LPI_SLV_SEND_TX_EN,
++ FIELD_PREP(MTK_PHY_LPI_SLV_SEND_TX_TIMER_MASK, 0x120));
++
++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG239,
++ MTK_PHY_LPI_SEND_LOC_TIMER_MASK |
++ MTK_PHY_LPI_TXPCS_LOC_RCV,
++ FIELD_PREP(MTK_PHY_LPI_SEND_LOC_TIMER_MASK, 0x117));
++
++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG2C7,
++ MTK_PHY_MAX_GAIN_MASK | MTK_PHY_MIN_GAIN_MASK,
++ FIELD_PREP(MTK_PHY_MAX_GAIN_MASK, 0x8) |
++ FIELD_PREP(MTK_PHY_MIN_GAIN_MASK, 0x13));
++
++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG2D1,
++ MTK_PHY_VCO_SLICER_THRESH_BITS_HIGH_EEE_MASK,
++ FIELD_PREP(MTK_PHY_VCO_SLICER_THRESH_BITS_HIGH_EEE_MASK,
++ 0x33) |
++ MTK_PHY_LPI_SKIP_SD_SLV_TR | MTK_PHY_LPI_TR_READY |
++ MTK_PHY_LPI_VCO_EEE_STG0_EN);
++
++ phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG323,
++ MTK_PHY_EEE_WAKE_MAS_INT_DC |
++ MTK_PHY_EEE_WAKE_SLV_INT_DC);
++
++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG324,
++ MTK_PHY_SMI_DETCNT_MAX_MASK,
++ FIELD_PREP(MTK_PHY_SMI_DETCNT_MAX_MASK, 0x3f) |
++ MTK_PHY_SMI_DET_MAX_EN);
++
++ phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG326,
++ MTK_PHY_LPI_MODE_SD_ON | MTK_PHY_RESET_RANDUPD_CNT |
++ MTK_PHY_TREC_UPDATE_ENAB_CLR |
++ MTK_PHY_LPI_QUIT_WAIT_DFE_SIG_DET_OFF |
++ MTK_PHY_TR_READY_SKIP_AFE_WAKEUP);
++
++ phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_52B5);
++ /* Regsigdet_sel_1000 = 0 */
++ __phy_write(phydev, 0x11, 0xb);
++ __phy_write(phydev, 0x12, 0x0);
++ __phy_write(phydev, 0x10, 0x9690);
++
++ /* REG_EEE_st2TrKf1000 = 3 */
++ __phy_write(phydev, 0x11, 0x114f);
++ __phy_write(phydev, 0x12, 0x2);
++ __phy_write(phydev, 0x10, 0x969a);
++
++ /* RegEEE_slv_wake_tr_timer_tar = 6, RegEEE_slv_remtx_timer_tar = 20 */
++ __phy_write(phydev, 0x11, 0x3028);
++ __phy_write(phydev, 0x12, 0x0);
++ __phy_write(phydev, 0x10, 0x969e);
++
++ /* RegEEE_slv_wake_int_timer_tar = 8 */
++ __phy_write(phydev, 0x11, 0x5010);
++ __phy_write(phydev, 0x12, 0x0);
++ __phy_write(phydev, 0x10, 0x96a0);
++
++ /* RegEEE_trfreeze_timer2 = 586 */
++ __phy_write(phydev, 0x11, 0x24a);
++ __phy_write(phydev, 0x12, 0x0);
++ __phy_write(phydev, 0x10, 0x96a8);
++
++ /* RegEEE100Stg1_tar = 16 */
++ __phy_write(phydev, 0x11, 0x3210);
++ __phy_write(phydev, 0x12, 0x0);
++ __phy_write(phydev, 0x10, 0x96b8);
++
++ /* REGEEE_wake_slv_tr_wait_dfesigdet_en = 1 */
++ __phy_write(phydev, 0x11, 0x1463);
++ __phy_write(phydev, 0x12, 0x0);
++ __phy_write(phydev, 0x10, 0x96ca);
++
++ /* DfeTailEnableVgaThresh1000 = 27 */
++ __phy_write(phydev, 0x11, 0x36);
++ __phy_write(phydev, 0x12, 0x0);
++ __phy_write(phydev, 0x10, 0x8f80);
++ phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0);
++
++ phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_3);
++ __phy_modify(phydev, MTK_PHY_LPI_REG_14, MTK_PHY_LPI_WAKE_TIMER_1000_MASK,
++ FIELD_PREP(MTK_PHY_LPI_WAKE_TIMER_1000_MASK, 0x19c));
++
++ __phy_modify(phydev, MTK_PHY_LPI_REG_1c, MTK_PHY_SMI_DET_ON_THRESH_MASK,
++ FIELD_PREP(MTK_PHY_SMI_DET_ON_THRESH_MASK, 0xc));
++ phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0);
++
++ phy_modify_mmd(phydev, MDIO_MMD_VEND1,
++ MTK_PHY_RG_LPI_PCS_DSP_CTRL_REG122,
++ MTK_PHY_LPI_NORM_MSE_HI_THRESH1000_MASK,
++ FIELD_PREP(MTK_PHY_LPI_NORM_MSE_HI_THRESH1000_MASK, 0xff));
++}
++
++static int cal_sw(struct phy_device *phydev, enum CAL_ITEM cal_item,
++ u8 start_pair, u8 end_pair)
++{
++ u8 pair_n;
++ int ret;
++
++ for (pair_n = start_pair; pair_n <= end_pair; pair_n++) {
++ /* TX_OFFSET & TX_AMP have no SW calibration. */
++ switch (cal_item) {
++ case TX_VCM:
++ ret = tx_vcm_cal_sw(phydev, pair_n);
++ break;
++ default:
++ return -EINVAL;
++ }
++ if (ret)
++ return ret;
++ }
++ return 0;
++}
++
++static int cal_efuse(struct phy_device *phydev, enum CAL_ITEM cal_item,
++ u8 start_pair, u8 end_pair, u32 *buf)
++{
++ u8 pair_n;
++ int ret;
++
++ for (pair_n = start_pair; pair_n <= end_pair; pair_n++) {
++ /* TX_VCM has no efuse calibration. */
++ switch (cal_item) {
++ case REXT:
++ ret = rext_cal_efuse(phydev, buf);
++ break;
++ case TX_OFFSET:
++ ret = tx_offset_cal_efuse(phydev, buf);
++ break;
++ case TX_AMP:
++ ret = tx_amp_cal_efuse(phydev, buf);
++ break;
++ case TX_R50:
++ ret = tx_r50_cal_efuse(phydev, buf, pair_n);
++ break;
++ default:
++ return -EINVAL;
++ }
++ if (ret)
++ return ret;
++ }
++
++ return 0;
++}
++
++static int start_cal(struct phy_device *phydev, enum CAL_ITEM cal_item,
++ enum CAL_MODE cal_mode, u8 start_pair,
++ u8 end_pair, u32 *buf)
++{
++ int ret;
++
++ switch (cal_mode) {
++ case EFUSE_M:
++ ret = cal_efuse(phydev, cal_item, start_pair,
++ end_pair, buf);
++ break;
++ case SW_M:
++ ret = cal_sw(phydev, cal_item, start_pair, end_pair);
++ break;
++ default:
++ return -EINVAL;
++ }
++
++ if (ret) {
++ phydev_err(phydev, "cal %d failed\n", cal_item);
++ return -EIO;
++ }
++
++ return 0;
++}
++
++static int mt798x_phy_calibration(struct phy_device *phydev)
++{
++ int ret = 0;
++ u32 *buf;
++ size_t len;
++ struct nvmem_cell *cell;
++
++ cell = nvmem_cell_get(&phydev->mdio.dev, "phy-cal-data");
++ if (IS_ERR(cell)) {
++ if (PTR_ERR(cell) == -EPROBE_DEFER)
++ return PTR_ERR(cell);
++ return 0;
++ }
++
++ buf = (u32 *)nvmem_cell_read(cell, &len);
++ if (IS_ERR(buf))
++ return PTR_ERR(buf);
++ nvmem_cell_put(cell);
++
++ if (!buf[0] || !buf[1] || !buf[2] || !buf[3] || len < 4 * sizeof(u32)) {
++ phydev_err(phydev, "invalid efuse data\n");
++ ret = -EINVAL;
++ goto out;
++ }
++
++ ret = start_cal(phydev, REXT, EFUSE_M, NO_PAIR, NO_PAIR, buf);
++ if (ret)
++ goto out;
++ ret = start_cal(phydev, TX_OFFSET, EFUSE_M, NO_PAIR, NO_PAIR, buf);
++ if (ret)
++ goto out;
++ ret = start_cal(phydev, TX_AMP, EFUSE_M, NO_PAIR, NO_PAIR, buf);
++ if (ret)
++ goto out;
++ ret = start_cal(phydev, TX_R50, EFUSE_M, PAIR_A, PAIR_D, buf);
++ if (ret)
++ goto out;
++ ret = start_cal(phydev, TX_VCM, SW_M, PAIR_A, PAIR_A, buf);
++ if (ret)
++ goto out;
++
++out:
++ kfree(buf);
++ return ret;
++}
++
++static int mt798x_phy_config_init(struct phy_device *phydev)
++{
++ switch (phydev->drv->phy_id) {
++ case MTK_GPHY_ID_MT7981:
++ mt7981_phy_finetune(phydev);
++ break;
++ case MTK_GPHY_ID_MT7988:
++ mt7988_phy_finetune(phydev);
++ break;
++ }
++
++ mt798x_phy_common_finetune(phydev);
++ mt798x_phy_eee(phydev);
++
++ return mt798x_phy_calibration(phydev);
++}
++
++static struct phy_driver mtk_socphy_driver[] = {
++ {
++ PHY_ID_MATCH_EXACT(MTK_GPHY_ID_MT7981),
++ .name = "MediaTek MT7981 PHY",
++ .config_init = mt798x_phy_config_init,
++ .config_intr = genphy_no_config_intr,
++ .handle_interrupt = genphy_handle_interrupt_no_ack,
++ .probe = mt798x_phy_calibration,
++ .suspend = genphy_suspend,
++ .resume = genphy_resume,
++ .read_page = mtk_socphy_read_page,
++ .write_page = mtk_socphy_write_page,
++ },
++ {
++ PHY_ID_MATCH_EXACT(MTK_GPHY_ID_MT7988),
++ .name = "MediaTek MT7988 PHY",
++ .config_init = mt798x_phy_config_init,
++ .config_intr = genphy_no_config_intr,
++ .handle_interrupt = genphy_handle_interrupt_no_ack,
++ .probe = mt798x_phy_calibration,
++ .suspend = genphy_suspend,
++ .resume = genphy_resume,
++ .read_page = mtk_socphy_read_page,
++ .write_page = mtk_socphy_write_page,
++ },
++};
++
++module_phy_driver(mtk_socphy_driver);
++
++static struct mdio_device_id __maybe_unused mtk_socphy_tbl[] = {
++ { PHY_ID_MATCH_EXACT(MTK_GPHY_ID_MT7981) },
++ { PHY_ID_MATCH_EXACT(MTK_GPHY_ID_MT7988) },
++ { }
++};
++
++MODULE_DESCRIPTION("MediaTek SoC Gigabit Ethernet PHY driver");
++MODULE_AUTHOR("Daniel Golle <daniel at makrotopia.org>");
++MODULE_AUTHOR("SkyLake Huang <SkyLake.Huang at mediatek.com>");
++MODULE_LICENSE("GPL");
++
++MODULE_DEVICE_TABLE(mdio, mtk_socphy_tbl);
+--- a/drivers/net/phy/mediatek-ge.c
++++ b/drivers/net/phy/mediatek-ge.c
+@@ -136,7 +136,8 @@ static struct phy_driver mtk_gephy_drive
+ module_phy_driver(mtk_gephy_driver);
+
+ static struct mdio_device_id __maybe_unused mtk_gephy_tbl[] = {
+- { PHY_ID_MATCH_VENDOR(0x03a29400) },
++ { PHY_ID_MATCH_EXACT(0x03a29441) },
++ { PHY_ID_MATCH_EXACT(0x03a29412) },
+ { }
+ };
+
diff --git a/target/linux/mediatek/patches-5.15/731-net-phy-mediatek-ge-soc-initialize-MT7988-PHY-LEDs-d.patch b/target/linux/mediatek/patches-5.15/731-net-phy-mediatek-ge-soc-initialize-MT7988-PHY-LEDs-d.patch
new file mode 100644
index 0000000000..83d0f26bf4
--- /dev/null
+++ b/target/linux/mediatek/patches-5.15/731-net-phy-mediatek-ge-soc-initialize-MT7988-PHY-LEDs-d.patch
@@ -0,0 +1,213 @@
+From 5d2d78860f98eb5c03bc404eb024606878901ac8 Mon Sep 17 00:00:00 2001
+From: Daniel Golle <daniel at makrotopia.org>
+Date: Tue, 13 Jun 2023 03:27:14 +0100
+Subject: [PATCH] net: phy: mediatek-ge-soc: initialize MT7988 PHY LEDs default
+ state
+
+Initialize LEDs and set sane default values.
+Read boottrap register and apply LED polarities accordingly to get
+uniform behavior from all LEDs on MT7988.
+Requires syscon phandle 'mediatek,pio' present in parenting MDIO bus
+which should point to the syscon holding the boottrap register.
+
+Signed-off-by: Daniel Golle <daniel at makrotopia.org>
+---
+ drivers/net/phy/mediatek-ge-soc.c | 144 ++++++++++++++++++++++++++++--
+ 1 file changed, 136 insertions(+), 8 deletions(-)
+
+--- a/drivers/net/phy/mediatek-ge-soc.c
++++ b/drivers/net/phy/mediatek-ge-soc.c
+@@ -1,11 +1,13 @@
+ // SPDX-License-Identifier: GPL-2.0+
+ #include <linux/bitfield.h>
++#include <linux/mfd/syscon.h>
+ #include <linux/module.h>
+ #include <linux/nvmem-consumer.h>
+ #include <linux/of_address.h>
+ #include <linux/of_platform.h>
+ #include <linux/pinctrl/consumer.h>
+ #include <linux/phy.h>
++#include <linux/regmap.h>
+
+ #define MTK_GPHY_ID_MT7981 0x03a29461
+ #define MTK_GPHY_ID_MT7988 0x03a29481
+@@ -208,9 +210,40 @@
+ #define MTK_PHY_DA_TX_R50_PAIR_C 0x53f
+ #define MTK_PHY_DA_TX_R50_PAIR_D 0x540
+
++/* Registers on MDIO_MMD_VEND2 */
++#define MTK_PHY_LED0_ON_CTRL 0x24
++#define MTK_PHY_LED1_ON_CTRL 0x26
++#define MTK_PHY_LED_ON_MASK GENMASK(6, 0)
++#define MTK_PHY_LED_ON_LINK1000 BIT(0)
++#define MTK_PHY_LED_ON_LINK100 BIT(1)
++#define MTK_PHY_LED_ON_LINK10 BIT(2)
++#define MTK_PHY_LED_ON_LINKDOWN BIT(3)
++#define MTK_PHY_LED_ON_FDX BIT(4) /* Full duplex */
++#define MTK_PHY_LED_ON_HDX BIT(5) /* Half duplex */
++#define MTK_PHY_LED_FORCE_ON BIT(6)
++#define MTK_PHY_LED_POLARITY BIT(14)
++#define MTK_PHY_LED_ENABLE BIT(15)
++
++#define MTK_PHY_LED0_BLINK_CTRL 0x25
++#define MTK_PHY_LED1_BLINK_CTRL 0x27
++#define MTK_PHY_LED_1000TX BIT(0)
++#define MTK_PHY_LED_1000RX BIT(1)
++#define MTK_PHY_LED_100TX BIT(2)
++#define MTK_PHY_LED_100RX BIT(3)
++#define MTK_PHY_LED_10TX BIT(4)
++#define MTK_PHY_LED_10RX BIT(5)
++#define MTK_PHY_LED_COLLISION BIT(6)
++#define MTK_PHY_LED_RX_CRC_ERR BIT(7)
++#define MTK_PHY_LED_RX_IDLE_ERR BIT(8)
++#define MTK_PHY_LED_FORCE_BLINK BIT(9)
++
+ #define MTK_PHY_RG_BG_RASEL 0x115
+ #define MTK_PHY_RG_BG_RASEL_MASK GENMASK(2, 0)
+
++/* Register in boottrap syscon defining the initial state of the 4 PHY LEDs */
++#define RG_GPIO_MISC_TPBANK0 0x6f0
++#define RG_GPIO_MISC_TPBANK0_BOOTMODE GENMASK(11, 8)
++
+ /* These macro privides efuse parsing for internal phy. */
+ #define EFS_DA_TX_I2MPB_A(x) (((x) >> 0) & GENMASK(5, 0))
+ #define EFS_DA_TX_I2MPB_B(x) (((x) >> 6) & GENMASK(5, 0))
+@@ -238,13 +271,6 @@ enum {
+ PAIR_D,
+ };
+
+-enum {
+- GPHY_PORT0,
+- GPHY_PORT1,
+- GPHY_PORT2,
+- GPHY_PORT3,
+-};
+-
+ enum calibration_mode {
+ EFUSE_K,
+ SW_K
+@@ -263,6 +289,10 @@ enum CAL_MODE {
+ SW_M
+ };
+
++struct mtk_socphy_shared {
++ u32 boottrap;
++};
++
+ static int mtk_socphy_read_page(struct phy_device *phydev)
+ {
+ return __phy_read(phydev, MTK_EXT_PAGE_ACCESS);
+@@ -1073,6 +1103,104 @@ static int mt798x_phy_config_init(struct
+ return mt798x_phy_calibration(phydev);
+ }
+
++static int mt798x_phy_setup_led(struct phy_device *phydev, bool inverted)
++{
++ struct pinctrl *pinctrl;
++ const u16 led_on_ctrl_defaults = MTK_PHY_LED_ENABLE |
++ MTK_PHY_LED_ON_LINK1000 |
++ MTK_PHY_LED_ON_LINK100 |
++ MTK_PHY_LED_ON_LINK10;
++ const u16 led_blink_defaults = MTK_PHY_LED_1000TX |
++ MTK_PHY_LED_1000RX |
++ MTK_PHY_LED_100TX |
++ MTK_PHY_LED_100RX |
++ MTK_PHY_LED_10TX |
++ MTK_PHY_LED_10RX;
++
++ phy_write_mmd(phydev, MDIO_MMD_VEND2, MTK_PHY_LED0_ON_CTRL,
++ led_on_ctrl_defaults ^
++ (inverted ? MTK_PHY_LED_POLARITY : 0));
++
++ phy_write_mmd(phydev, MDIO_MMD_VEND2, MTK_PHY_LED1_ON_CTRL,
++ led_on_ctrl_defaults);
++
++ phy_write_mmd(phydev, MDIO_MMD_VEND2, MTK_PHY_LED0_BLINK_CTRL,
++ led_blink_defaults);
++
++ phy_write_mmd(phydev, MDIO_MMD_VEND2, MTK_PHY_LED1_BLINK_CTRL,
++ led_blink_defaults);
++
++ pinctrl = devm_pinctrl_get_select(&phydev->mdio.dev, "gbe-led");
++ if (IS_ERR(pinctrl))
++ dev_err(&phydev->mdio.bus->dev, "Failed to setup PHY LED\n");
++
++ return 0;
++}
++
++static int mt7988_phy_probe_shared(struct phy_device *phydev)
++{
++ struct device_node *np = dev_of_node(&phydev->mdio.bus->dev);
++ struct mtk_socphy_shared *priv = phydev->shared->priv;
++ struct regmap *regmap;
++ u32 reg;
++ int ret;
++
++ /* The LED0 of the 4 PHYs in MT7988 are wired to SoC pins LED_A, LED_B,
++ * LED_C and LED_D respectively. At the same time those pins are used to
++ * bootstrap configuration of the reference clock source (LED_A),
++ * DRAM DDRx16b x2/x1 (LED_B) and boot device (LED_C, LED_D).
++ * In practise this is done using a LED and a resistor pulling the pin
++ * either to GND or to VIO.
++ * The detected value at boot time is accessible at run-time using the
++ * TPBANK0 register located in the gpio base of the pinctrl, in order
++ * to read it here it needs to be referenced by a phandle called
++ * 'mediatek,pio' in the MDIO bus hosting the PHY.
++ * The 4 bits in TPBANK0 are kept as package shared data and are used to
++ * set LED polarity for each of the LED0.
++ */
++ regmap = syscon_regmap_lookup_by_phandle(np, "mediatek,pio");
++ if (IS_ERR(regmap))
++ return PTR_ERR(regmap);
++
++ ret = regmap_read(regmap, RG_GPIO_MISC_TPBANK0, ®);
++ if (ret)
++ return ret;
++
++ priv->boottrap = FIELD_GET(RG_GPIO_MISC_TPBANK0_BOOTMODE, reg);
++
++ return 0;
++}
++
++static bool mt7988_phy_get_boottrap_polarity(struct phy_device *phydev)
++{
++ struct mtk_socphy_shared *priv = phydev->shared->priv;
++
++ if (priv->boottrap & BIT(phydev->mdio.addr))
++ return false;
++
++ return true;
++}
++
++static int mt7988_phy_probe(struct phy_device *phydev)
++{
++ int err;
++
++ err = devm_phy_package_join(&phydev->mdio.dev, phydev, 0,
++ sizeof(struct mtk_socphy_shared));
++ if (err)
++ return err;
++
++ if (phy_package_probe_once(phydev)) {
++ err = mt7988_phy_probe_shared(phydev);
++ if (err)
++ return err;
++ }
++
++ mt798x_phy_setup_led(phydev, mt7988_phy_get_boottrap_polarity(phydev));
++
++ return mt798x_phy_calibration(phydev);
++}
++
+ static struct phy_driver mtk_socphy_driver[] = {
+ {
+ PHY_ID_MATCH_EXACT(MTK_GPHY_ID_MT7981),
+@@ -1092,7 +1220,7 @@ static struct phy_driver mtk_socphy_driv
+ .config_init = mt798x_phy_config_init,
+ .config_intr = genphy_no_config_intr,
+ .handle_interrupt = genphy_handle_interrupt_no_ack,
+- .probe = mt798x_phy_calibration,
++ .probe = mt7988_phy_probe,
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+ .read_page = mtk_socphy_read_page,
More information about the lede-commits
mailing list