[openwrt/openwrt] mediatek: filogic: add H3C Magic NX30 Pro support
LEDE Commits
lede-commits at lists.infradead.org
Thu Jul 13 04:06:01 PDT 2023
dangole pushed a commit to openwrt/openwrt.git, branch openwrt-23.05:
https://git.openwrt.org/cf81850ccea9cce9ae64e638d49bf75838e518d9
commit cf81850ccea9cce9ae64e638d49bf75838e518d9
Author: Chukun Pan <amadeus at jmu.edu.cn>
AuthorDate: Sun May 21 23:00:16 2023 +0800
mediatek: filogic: add H3C Magic NX30 Pro support
Hardware specification:
SoC: MediaTek MT7981B 2x A53
Flash: W25N01GVZEIG 128MB
RAM: NT5CB128M16JR-FL 256MB
Ethernet: 4x 10/100/1000 Mbps
Switch: MediaTek MT7531AE
WiFi: MediaTek MT7976C
Button: Reset, WPS
Power: DC 12V 1A
Flash instructions:
1. PC run command: "telnet 192.168.124.1 99"
Username: H3C, password is the web login
password of the router.
2. Download preloader.bin and bl31-uboot.fip
3. PC run command: "python3 -m http.server 80"
4. Download files in the telnet window:
"wget http://192.168.124.xx/xxx.bin"
Replace xx with your PC's IP and
the preloader.bin and bl31-uboot.fip.
5. Flushing openwrt's uboot:
"mtd write xxx-preloader.bin BL2"
"mtd write xxx-bl31-uboot.fip FIP"
6. Connect to the router via the Lan port,
set a static ip of your PC.
(ip 192.168.1.254, gateway 192.168.1.1)
7. Download initramfs image, reboot router,
waiting for tftp recovery to complete.
8. After openwrt boots up, perform sysupgrade.
Note:
1. The u-boot-env partition on mtd is empty,
OEM stores their env on ubi:u-boot-env.
2. Back up all mtd partitions before flashing.
Signed-off-by: Chukun Pan <amadeus at jmu.edu.cn>
(cherry picked from commit e78d1a06c8a47be9ea5a306bfb43f3d7ceb89646)
---
.../mediatek/dts/mt7981b-h3c-magic-nx30-pro.dts | 239 +++++++++++++++++++++
.../filogic/base-files/etc/board.d/02_network | 8 +
.../etc/hotplug.d/ieee80211/11_fix_wifi_mac | 5 +
.../filogic/base-files/lib/upgrade/platform.sh | 1 +
target/linux/mediatek/image/filogic.mk | 25 +++
5 files changed, 278 insertions(+)
diff --git a/target/linux/mediatek/dts/mt7981b-h3c-magic-nx30-pro.dts b/target/linux/mediatek/dts/mt7981b-h3c-magic-nx30-pro.dts
new file mode 100644
index 0000000000..358365adba
--- /dev/null
+++ b/target/linux/mediatek/dts/mt7981b-h3c-magic-nx30-pro.dts
@@ -0,0 +1,239 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "mt7981.dtsi"
+
+/ {
+ model = "H3C Magic NX30 Pro";
+ compatible = "h3c,magic-nx30-pro", "mediatek,mt7981";
+
+ aliases {
+ serial0 = &uart0;
+ led-boot = &led_status_green;
+ led-failsafe = &led_status_red;
+ led-running = &led_status_green;
+ led-upgrade = &led_status_red;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory {
+ reg = <0 0x40000000 0 0x10000000>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&pio 1 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "wps";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&pio 0 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_status_green: green {
+ label = "green:status";
+ gpios = <&pio 4 GPIO_ACTIVE_LOW>;
+ };
+
+ led_status_red: red {
+ label = "red:status";
+ gpios = <&pio 5 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+ð {
+ status = "okay";
+
+ gmac0: mac at 0 {
+ compatible = "mediatek,eth-mac";
+ reg = <0>;
+ phy-mode = "2500base-x";
+
+ fixed-link {
+ speed = <2500>;
+ full-duplex;
+ pause;
+ };
+ };
+
+ gmac1: mac at 1 {
+ compatible = "mediatek,eth-mac";
+ reg = <1>;
+ phy-mode = "gmii";
+ phy-handle = <&int_gbe_phy>;
+ };
+};
+
+&mdio_bus {
+ switch: switch at 0 {
+ compatible = "mediatek,mt7531";
+ reg = <31>;
+ reset-gpios = <&pio 39 GPIO_ACTIVE_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&pio>;
+ interrupts = <38 IRQ_TYPE_LEVEL_HIGH>;
+ };
+};
+
+&spi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_flash_pins>;
+ status = "okay";
+
+ spi_nand at 0 {
+ compatible = "spi-nand";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0>;
+
+ spi-max-frequency = <52000000>;
+ spi-tx-buswidth = <4>;
+ spi-rx-buswidth = <4>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition at 0 {
+ label = "BL2";
+ reg = <0x0000000 0x0100000>;
+ read-only;
+ };
+
+ partition at 100000 {
+ label = "u-boot-env";
+ reg = <0x0100000 0x0080000>;
+ };
+
+ factory: partition at 180000 {
+ label = "Factory";
+ reg = <0x0180000 0x0200000>;
+ read-only;
+ };
+
+ partition at 380000 {
+ label = "FIP";
+ reg = <0x0380000 0x0200000>;
+ read-only;
+ };
+
+ partition at 580000 {
+ label = "ubi";
+ reg = <0x0580000 0x4000000>;
+ };
+
+ /* yaffs partition */
+ partition at 4580000 {
+ label = "pdt_data";
+ reg = <0x4580000 0x0600000>;
+ read-only;
+ };
+
+ /* yaffs partition */
+ partition at 4b80000 {
+ label = "pdt_data_1";
+ reg = <0x4b80000 0x0600000>;
+ read-only;
+ };
+
+ partition at 5180000 {
+ label = "exp";
+ reg = <0x5180000 0x0100000>;
+ read-only;
+ };
+
+ partition at 5280000 {
+ label = "plugin";
+ reg = <0x5280000 0x2580000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&switch {
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
+ reg = <0>;
+ label = "lan1";
+ };
+
+ port at 1 {
+ reg = <1>;
+ label = "lan2";
+ };
+
+ port at 2 {
+ reg = <2>;
+ label = "lan3";
+ };
+
+ port at 6 {
+ reg = <6>;
+ ethernet = <&gmac0>;
+ phy-mode = "2500base-x";
+
+ fixed-link {
+ speed = <2500>;
+ full-duplex;
+ pause;
+ };
+ };
+ };
+};
+
+&pio {
+ spi0_flash_pins: spi0-pins {
+ mux {
+ function = "spi";
+ groups = "spi0", "spi0_wp_hold";
+ };
+
+ conf-pu {
+ pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP";
+ drive-strength = <8>;
+ mediatek,pull-up-adv = <0>; /* bias-disable */
+ };
+
+ conf-pd {
+ pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO";
+ drive-strength = <8>;
+ mediatek,pull-up-adv = <0>; /* bias-disable */
+ };
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&watchdog {
+ status = "okay";
+};
+
+&wifi {
+ status = "okay";
+
+ mediatek,mtd-eeprom = <&factory 0x0>;
+};
diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network
index c05c5d25e4..6abc81a0b0 100644
--- a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network
+++ b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network
@@ -23,6 +23,9 @@ mediatek_setup_interfaces()
glinet,gl-mt3000)
ucidef_set_interfaces_lan_wan eth1 eth0
;;
+ h3c,magic-nx30-pro)
+ ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" eth1
+ ;;
mediatek,mt7986a-rfb)
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 lan6" "eth1 wan"
;;
@@ -72,6 +75,11 @@ mediatek_setup_macs()
bananapi,bpi-r3)
wan_mac=$(macaddr_add $(cat /sys/class/net/eth0/address) 1)
;;
+ h3c,magic-nx30-pro)
+ wan_mac=$(mtd_get_mac_ascii pdt_data_1 ethaddr)
+ lan_mac=$(macaddr_add "$wan_mac" 1)
+ label_mac=$wan_mac
+ ;;
mercusys,mr90x-v1)
label_mac=$(get_mac_binary "/tmp/tp_data/default-mac" 0)
lan_mac=$label_mac
diff --git a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac
index 4b7047eec5..ab23b10044 100644
--- a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac
+++ b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac
@@ -32,6 +32,11 @@ case "$board" in
[ "$PHYNBR" = "0" ] && echo "$addr" > /sys${DEVPATH}/macaddress
[ "$PHYNBR" = "1" ] && macaddr_setbit_la $(macaddr_add $addr 1) > /sys${DEVPATH}/macaddress
;;
+ h3c,magic-nx30-pro)
+ addr=$(mtd_get_mac_ascii pdt_data_1 ethaddr)
+ [ "$PHYNBR" = "0" ] && macaddr_add $addr 2 > /sys${DEVPATH}/macaddress
+ [ "$PHYNBR" = "1" ] && macaddr_add $addr 3 > /sys${DEVPATH}/macaddress
+ ;;
mercusys,mr90x-v1)
addr=$(get_mac_binary "/tmp/tp_data/default-mac" 0)
[ "$PHYNBR" = "0" ] && echo "$addr" > /sys${DEVPATH}/macaddress
diff --git a/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh b/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh
index 11c2c5c664..186abfa5a8 100755
--- a/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh
+++ b/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh
@@ -74,6 +74,7 @@ platform_do_upgrade() {
CI_UBIPART="ubi0"
nand_do_upgrade "$1"
;;
+ h3c,magic-nx30-pro|\
qihoo,360t7|\
tplink,tl-xdr4288|\
tplink,tl-xdr6086|\
diff --git a/target/linux/mediatek/image/filogic.mk b/target/linux/mediatek/image/filogic.mk
index fd83b9d441..2ace305140 100644
--- a/target/linux/mediatek/image/filogic.mk
+++ b/target/linux/mediatek/image/filogic.mk
@@ -176,6 +176,31 @@ define Device/glinet_gl-mt3000
endef
TARGET_DEVICES += glinet_gl-mt3000
+define Device/h3c_magic-nx30-pro
+ DEVICE_VENDOR := H3C
+ DEVICE_MODEL := Magic NX30 Pro
+ DEVICE_DTS := mt7981b-h3c-magic-nx30-pro
+ DEVICE_DTS_DIR := ../dts
+ UBINIZE_OPTS := -E 5
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ KERNEL_IN_UBI := 1
+ UBOOTENV_IN_UBI := 1
+ IMAGE_SIZE := 65536k
+ IMAGES := sysupgrade.itb
+ KERNEL_INITRAMFS_SUFFIX := -recovery.itb
+ KERNEL := kernel-bin | gzip
+ KERNEL_INITRAMFS := kernel-bin | lzma | \
+ fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
+ IMAGE/sysupgrade.itb := append-kernel | \
+ fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata
+ DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware
+ ARTIFACTS := preloader.bin bl31-uboot.fip
+ ARTIFACT/preloader.bin := mt7981-bl2 spim-nand-ddr3
+ ARTIFACT/bl31-uboot.fip := mt7981-bl31-uboot h3c_magic-nx30-pro
+endef
+TARGET_DEVICES += h3c_magic-nx30-pro
+
define Device/netgear_wax220
DEVICE_VENDOR := Netgear
DEVICE_MODEL := WAX220
More information about the lede-commits
mailing list